#!/bin/sh
#
-# ffmpeg configure script (c) 2000, 2001, 2002 Fabrice Bellard
+# FFmpeg configure script
+#
+# Copyright (c) 2000, 2001, 2002 Fabrice Bellard
+# Copyright (c) 2005-2006 Diego Biurrun
+# Copyright (c) 2005-2006 Mans Rullgard
#
# make sure we are running under a compatible shell
+# try to make this part work with most shells
+
+try_exec(){
+ type "$1" >/dev/null 2>&1 && exec "$@"
+}
+
unset foo
(: ${foo%%bar}) 2>/dev/null && ! (: ${foo?}) 2>/dev/null
if test "$?" != 0; then
- if test "x$FFMPEG_CONFIGURE_EXEC" = x; then
- FFMPEG_CONFIGURE_EXEC=1
- export FFMPEG_CONFIGURE_EXEC
- exec bash "$0" "$@"
- exec ksh "$0" "$@"
- exec /usr/xpg4/bin/sh "$0" "$@"
+ export FF_CONF_EXEC
+ if test "0$FF_CONF_EXEC" -lt 1; then
+ FF_CONF_EXEC=1
+ try_exec bash "$0" "$@"
+ fi
+ if test "0$FF_CONF_EXEC" -lt 2; then
+ FF_CONF_EXEC=2
+ try_exec ksh "$0" "$@"
+ fi
+ if test "0$FF_CONF_EXEC" -lt 3; then
+ FF_CONF_EXEC=3
+ try_exec /usr/xpg4/bin/sh "$0" "$@"
fi
echo "No compatible shell script interpreter found."
+ echo "This configure script requires a POSIX compatible shell"
+ echo "such as bash or ksh."
+ if test "$BASH_VERSION" = '2.04.0(1)-release'; then
+ echo "This bash version ($BASH_VERSION) is broken on your platform."
+ echo "Upgrade to a later version if available."
+ fi
exit 1
fi
exit 1
}
+# "tr '[a-z]' '[A-Z]'" is a workaround for Solaris tr not grokking "tr a-z A-Z"
+toupper(){
+ echo "$@" | tr '[a-z]' '[A-Z]'
+}
+
set_all(){
value=$1
shift
}
enabled(){
- eval test "\$$1" = "yes"
+ eval test "x\$$1" = "xyes"
+}
+
+enabled_all(){
+ for opt; do
+ enabled $opt || return 1
+ done
+}
+
+enabled_any(){
+ for opt; do
+ enabled $opt && return 0
+ done
+}
+
+print_config(){
+ pfx=$1
+ header=$2
+ makefile=$3
+ shift 3
+ for cfg; do
+ if enabled $cfg; then
+ ucname="${pfx}`toupper $cfg`"
+ echo "#define ${ucname} 1" >> $header
+ echo "${ucname}=yes" >> $makefile
+ fi
+ done
}
flags_saved(){
#include <$header>
int x;
EOF
+ err=$?
+ var=`echo $header | sed 's/[^[:alnum:]]/_/g'`
+ test "$err" = 0 && enable $var || disable $var
+ return $err
}
check_func(){
$func();
}
EOF
+ err=$?
+ test "$err" = 0 && enable $func || disable $func
+ return $err
}
check_lib(){
check_lib $header $func "$@" || die "ERROR: $name not found"
}
+CONFIG_LIST='
+ encoders
+ decoders
+ parsers
+ muxers
+ demuxers
+ a52
+ a52bin
+ amr
+ amr_nb
+ amr_nb_fixed
+ amr_wb
+ audio_beos
+ audio_oss
+ avisynth
+ beos_netserver
+ bktr
+ dc1394
+ dts
+ dv1394
+ faac
+ faad
+ faadbin
+ ffmpeg
+ ffplay
+ ffserver
+ gpl
+ ipv6
+ libgsm
+ libnut
+ libogg
+ libvorbis
+ memalign_hack
+ mp3lame
+ mpegaudio_hp
+ network
+ pp
+ protocols
+ swscaler
+ vhook
+ video4linux
+ video4linux2
+ wince
+ x264
+ xvid
+ zlib
+'
+
+HAVE_LIST='
+ altivec_h
+ beosthreads
+ byteswap_h
+ dcbzl
+ dlfcn_h
+ dlopen
+ freetype2
+ gprof
+ imlib2
+ inet_aton
+ localtime_r
+ lrintf
+ malloc_h
+ memalign
+ mlib
+ os2
+ os2threads
+ pthreads
+ sdl
+ sdl_video_size
+ threads
+ w32threads
+'
+
# set temporary file name
if test ! -z "$TMPDIR" ; then
TMPDIR1="${TMPDIR}"
;;
esac
gprof="no"
-v4l="yes"
-v4l2="yes"
+video4linux="yes"
+video4linux2="yes"
bktr="no"
audio_oss="yes"
audio_beos="no"
dts="no"
pp="no"
mingw32="no"
-mingwce="no"
+wince="no"
os2="no"
lstatic="yes"
lshared="no"
installstrip="-s"
extralibs="-lm"
bigendian="no"
-inttypes="yes"
-emu_fast_int="no"
vhook="default"
avisynth="no"
-dlfcn="no"
+dlfcn_h="no"
dlopen="no"
mpegaudio_hp="yes"
SHFLAGS='-shared -Wl,-soname,$@'
VHOOKSHFLAGS='$(SHFLAGS)'
beos_netserver="no"
-need_inet_aton="no"
protocols="yes"
ffmpeg="yes"
ffserver="yes"
amr_wb="no"
amr_nb_fixed="no"
amr_if2="no"
-sunmlib="no"
+mlib="no"
pthreads="no"
swscaler="no"
gpl="no"
-memalignhack="no"
+memalign_hack="no"
asmalign_pot="unknown"
LIB_INSTALL_EXTRA_CMD='$(RANLIB) "$(libdir)/$(LIB)"'
SHFLAGS=-nostart
# disable Linux things
audio_oss="no"
-v4l="no"
-v4l2="no"
+video4linux="no"
+video4linux2="no"
dv1394="no"
# enable BeOS things
audio_beos="yes"
+beosthreads="yes"
# no need for libm, but the inet stuff
# Check for BONE
if (echo $BEINCLUDES|grep 'headers/be/bone' >/dev/null); then
extralibs="-lbind -lsocket"
else
beos_netserver="yes"
-need_inet_aton="yes"
extralibs="-lnet"
fi ;;
SunOS)
-v4l="no"
-v4l2="no"
+video4linux="no"
+video4linux2="no"
audio_oss="no"
dv1394="no"
make="gmake"
FFLDFLAGS=""
FFSERVERLDFLAGS=""
SHFLAGS="-shared -Wl,-h,\$@"
-need_inet_aton="yes"
add_extralibs "-lsocket -lnsl"
;;
NetBSD)
-v4l="no"
-v4l2="no"
+video4linux="no"
+video4linux2="no"
bktr="yes"
audio_oss="yes"
dv1394="no"
add_extralibs "-lossaudio"
;;
OpenBSD)
-v4l="no"
-v4l2="no"
+video4linux="no"
+video4linux2="no"
bktr="yes"
audio_oss="yes"
dv1394="no"
add_extralibs "-lossaudio"
;;
FreeBSD)
-v4l="no"
-v4l2="no"
+video4linux="no"
+video4linux2="no"
bktr="yes"
audio_oss="yes"
dv1394="no"
add_cflags "-pthread"
;;
GNU/kFreeBSD)
-v4l="no"
-v4l2="no"
+video4linux="no"
+video4linux2="no"
bktr="yes"
audio_oss="yes"
dv1394="no"
add_cflags "-pthread"
;;
BSD/OS)
-v4l="no"
-v4l2="no"
+video4linux="no"
+video4linux2="no"
bktr="yes"
audio_oss="yes"
dv1394="no"
;;
Darwin)
cc="cc"
-v4l="no"
-v4l2="no"
+video4linux="no"
+video4linux2="no"
audio_oss="no"
dv1394="no"
SHFLAGS="-dynamiclib -Wl,-single_module -Wl,-install_name,\$(shlibdir)/\$(SLIBNAME),-current_version,\$(SPPVERSION),-compatibility_version,\$(SPPVERSION)"
;;
CYGWIN*)
targetos=CYGWIN
-shlibdir='${PREFIX}/bin'
-v4l="no"
-v4l2="no"
+shlibdir="$bindir"
+video4linux="no"
+video4linux2="no"
audio_oss="yes"
dv1394="no"
VHOOKSHFLAGS='-shared -L$(BUILD_ROOT)/libavformat -L$(BUILD_ROOT)/libavcodec -L$(BUILD_ROOT)/libavutil'
IRIX*)
targetos=IRIX
ranlib="echo ignoring ranlib"
-v4l="no"
-v4l2="no"
+video4linux="no"
+video4linux2="no"
audio_oss="no"
make="gmake"
;;
EXESUF=".exe"
extralibs=""
pkg_requires=""
-v4l="no"
-v4l2="no"
+video4linux="no"
+video4linux2="no"
audio_oss="no"
dv1394="no"
ffserver="no"
vhook="no"
os2="yes"
-
+os2threads="yes"
;;
*)
targetos="${targetos}-UNKNOWN"
FFMPEG_CONFIGURATION="$FFMPEG_CONFIGURATION""$opt "
done
-ENCODER_LIST=`grep 'register_avcodec(&[a-z0-9_]*_encoder)' "$source_path/libavcodec/allcodecs.c" | sed 's/.*&\(.*\)).*/\1/'`
-DECODER_LIST=`grep 'register_avcodec(&[a-z0-9_]*_decoder)' "$source_path/libavcodec/allcodecs.c" | sed 's/.*&\(.*\)).*/\1/'`
-PARSER_LIST=`grep 'av_register_codec_parser(&[a-z]' "$source_path/libavcodec/allcodecs.c" | sed 's/.*&\(.*\)).*/\1/'`
-MUXER_LIST=`grep 'av_register_output_format(&[a-z]' "$source_path/libavformat/allformats.c" | sed 's/.*&\(.*\)).*/\1/'`
-DEMUXER_LIST=`grep 'av_register_input_format(&[a-z]' "$source_path/libavformat/allformats.c" | sed 's/.*&\(.*\)).*/\1/'`
+ENCODER_LIST=`sed -n 's/^[^#]*ENC.*, *\(.*\)).*/\1_encoder/p' "$source_path/libavcodec/allcodecs.c"`
+DECODER_LIST=`sed -n 's/^[^#]*DEC.*, *\(.*\)).*/\1_decoder/p' "$source_path/libavcodec/allcodecs.c"`
+PARSER_LIST=`sed -n 's/^[^#]*PARSER.*, *\(.*\)).*/\1_parser/p' "$source_path/libavcodec/allcodecs.c"`
+MUXER_LIST=`sed -n 's/^[^#]*_MUX.*, *\(.*\)).*/\1_muxer/p' "$source_path/libavformat/allformats.c"`
+DEMUXER_LIST=`sed -n 's/^[^#]*DEMUX.*, *\(.*\)).*/\1_demuxer/p' "$source_path/libavformat/allformats.c"`
enable $ENCODER_LIST $DECODER_LIST $PARSER_LIST $MUXER_LIST $DEMUXER_LIST
;;
--log=*) logging="$optval"
;;
- --prefix=*) PREFIX="$optval"; force_prefix=yes
+ --prefix=*) PREFIX="$optval"
;;
- --libdir=*) libdir="$optval"; force_libdir=yes
+ --libdir=*) libdir="$optval"
;;
--shlibdir=*) shlibdir="$optval"
;;
;;
--enable-gprof) gprof="yes"
;;
- --disable-v4l) v4l="no"
+ --disable-v4l) video4linux="no"
;;
- --disable-v4l2) v4l2="no"
+ --disable-v4l2) video4linux2="no"
;;
--disable-bktr) bktr="no"
;;
;;
--enable-mingw32) mingw32="yes"
;;
- --enable-mingwce) mingwce="yes"
+ --enable-mingwce) wince="yes"
;;
--enable-static) lstatic="yes"
;;
;;
--enable-amr_if2) amr="yes"; amr_if2="yes"
;;
- --enable-sunmlib) sunmlib="yes"
+ --enable-sunmlib) mlib="yes"
;;
--enable-pthreads) pthreads="yes"
;;
;;
--enable-gpl) gpl="yes"
;;
- --enable-memalign-hack) memalignhack="yes"
+ --enable-memalign-hack) memalign_hack="yes"
;;
--disable-strip) dostrip="no"
;;
logfile=/dev/null
fi
-if test "$mingw32" = "yes" -o "$mingwce" = "yes"; then
+if test "$mingw32" = "yes" -o "$wince" = "yes"; then
if test "$lshared" = "yes" && test "$lstatic" = "yes" ; then
cat <<EOF
You can only build one library type at once on MinGW.
EOF
exit 1
fi
- v4l="no"
- v4l2="no"
+ video4linux="no"
+ video4linux2="no"
bktr="no"
audio_oss="no"
dv1394="no"
dc1394="no"
ffserver="no"
network="no"
- if test "$mingwce" = "yes"; then
+ if enabled mingw32; then
+ w32threads="yes"
+ fi
+ if test "$wince" = "yes"; then
protocols="no"
fi
SLIBPREF=""
SLIBNAME_WITH_MAJOR='$(SLIBPREF)$(NAME)-$(LIBMAJOR)$(SLIBSUF)'
SLIB_EXTRA_CMD="-lib /machine:i386 /def:\$(@:${SLIBSUF}=.def)"
SHFLAGS="-shared -Wl,--output-def,\$(@:${SLIBSUF}=.def),--out-implib,lib\$(SLIBNAME:\$(SLIBSUF)=.dll.a)"
- if test "$force_prefix" != yes; then PREFIX="$PROGRAMFILES/FFmpeg"; fi
- if test "$force_libdir" != yes; then bindir='${PREFIX}'; fi
- shlibdir='${PREFIX}'
fi
# Combine FFLDFLAGS and the LDFLAGS environment variable.
fi
# Add processor-specific flags
-TUNECPU="generic"
POWERPCMODE="32bits"
if test $cpu != "generic"; then
case $cpu in
if test $altivec = "yes"; then
echo "WARNING: Tuning for PPC601 but AltiVec enabled!";
fi
- TUNECPU=ppc601
;;
603*|ppc603*|PowerPC603*)
add_cflags "-mcpu=603"
if test $altivec = "yes"; then
echo "WARNING: Tuning for PPC603 but AltiVec enabled!";
fi
- TUNECPU=ppc603
;;
604*|ppc604*|PowerPC604*)
add_cflags "-mcpu=604"
if test $altivec = "yes"; then
echo "WARNING: Tuning for PPC604 but AltiVec enabled!";
fi
- TUNECPU=ppc604
;;
G3|g3|75*|ppc75*|PowerPC75*)
add_cflags "-mcpu=750 -mpowerpc-gfxopt"
if test $altivec = "yes"; then
echo "WARNING: Tuning for PPC75x but AltiVec enabled!";
fi
- TUNECPU=ppc750
;;
G4|g4|745*|ppc745*|PowerPC745*)
add_cflags "-mcpu=7450 -mpowerpc-gfxopt"
if test $altivec = "no"; then
echo "WARNING: Tuning for PPC745x but AltiVec disabled!";
fi
- TUNECPU=ppc7450
;;
74*|ppc74*|PowerPC74*)
add_cflags "-mcpu=7400 -mpowerpc-gfxopt"
if test $altivec = "no"; then
echo "WARNING: Tuning for PPC74xx but AltiVec disabled!";
fi
- TUNECPU=ppc7400
;;
G5|g5|970|ppc970|PowerPC970|power4*|Power4*)
add_cflags "-mcpu=970 -mpowerpc-gfxopt -mpowerpc64"
if test $altivec = "no"; then
echo "WARNING: Tuning for PPC970 but AltiVec disabled!";
fi
- TUNECPU=ppc970
POWERPCMODE="64bits"
;;
# targets that do NOT support conditional mov (cmov)
fi
fi
-check_header altivec.h && _altivec_h=yes || _altivec_h=no
+check_header altivec.h
# check if our compiler supports Motorola AltiVec C API
if test $altivec = "yes"; then
- if test $_altivec_h = "yes"; then
+ if test $altivec_h = "yes"; then
inc_altivec_h="#include <altivec.h>"
else
inc_altivec_h=
fi
fi
-# ---
-# *inttypes.h* test
-check_header inttypes.h || inttypes=no
-
-# ---
-# *int_fast* test
-check_cc <<EOF || emu_fast_int=yes
-#include <inttypes.h>
-int main(int argc, char ** argv){
- volatile uint_fast64_t i=0x01234567;
- return 0;
-}
-EOF
-
# ---
# check availability of some header files
-_memalign=no
-malloc_h=no
-if check_header malloc.h; then
- malloc_h=yes
- _memalign=yes
- check_func memalign || _memalign="no"
-fi
+check_header malloc.h
+check_func memalign
-if test "$_memalign" = "no" -a "$mmx" = "yes" -a \
- "$memalignhack" != "yes" -a "$targetos" != "Darwin" -a \
+if test "$memalign" = "no" -a "$mmx" = "yes" -a \
+ "$memalign_hack" != "yes" -a "$targetos" != "Darwin" -a \
"$targetos" != "FreeBSD" ; then
die "Error, no memalign() but SSE enabled, disable it or use --enable-memalign-hack."
fi
-check_header byteswap.h && byteswap_h=yes || byteswap_h=no
+check_header byteswap.h
-check_func localtime_r && localtime_r=yes || localtime_r=no
+check_func inet_aton
+check_func localtime_r
enabled zlib && check_lib zlib.h zlibVersion -lz || zlib="no"
# check for some common methods of building with pthread support
# do this before the optional library checks as some of them require pthreads
if enabled pthreads; then
- { check_cflags -pthread && check_ldflags -pthread; } ||
- { check_cflags -pthreads && check_ldflags -pthreads; } ||
- check_lib pthread.h pthread_create -lpthread ||
- check_func pthread_create ||
- die "ERROR: can't find pthreads library"
+ if check_func pthread_create; then
+ :
+ elif check_func pthread_create -pthread; then
+ add_cflags -pthread
+ add_ldflags -pthread
+ elif check_func pthread_create -pthreads; then
+ add_cflags -pthreads
+ add_ldflags -pthreads
+ elif ! check_lib pthread.h pthread_create -lpthread; then
+ die "ERROR: can't find pthreads library"
+ fi
fi
# these are off by default, so fail if requested and not available
enabled mp3lame && require LAME lame/lame.h lame_init -lmp3lame -lm
enabled libvorbis && require libvorbis vorbis/vorbisenc.h vorbis_info_init -lvorbis -lvorbisenc -logg
enabled libogg && require libogg ogg/ogg.h ogg_sync_init -logg
-enabled libnut && require libnut nut.h nut_demuxer_init -lnut
+enabled libnut && require libnut libnut.h nut_demuxer_init -lnut
enabled xvid && require XviD xvid.h xvid_global -lxvidcore
enabled x264 && require x264 x264.h x264_encoder_open -lx264
enabled dc1394 && require libdc1394 libdc1394/dc1394_control.h dc1394_create_handle -ldc1394_control -lraw1394
-enabled sunmlib && require mediaLib mlib_types.h mlib_VectorSub_S16_U8_Mod -lmlib
+enabled mlib && require mediaLib mlib_types.h mlib_VectorSub_S16_U8_Mod -lmlib
# Ugh, faac uses stdcall calling convention on win32 so we can't use
# the generic test functions
# test for lrintf in math.h
-check_exec <<EOF && have_lrintf=yes || have_lrintf=no
+check_exec <<EOF && lrintf=yes || lrintf=no
#define _ISOC9X_SOURCE 1
#include <math.h>
int main( void ) { return (lrintf(3.999f) > 0)?0:1; }
# dlopen/dlfcn.h probing
-check_header dlfcn.h && dlfcn=yes
-
-temp_extralibs -ldl
-if check_func dlopen; then
- dlopen=yes
- ldl=-ldl
-fi
-restore_flags
+check_header dlfcn.h
if check_func dlopen; then
- dlopen=yes
ldl=
+elif check_func dlopen -ldl; then
+ ldl=-ldl
fi
if test "$vhook" = "default"; then
vhook="$dlopen"
fi
-if test "$vhook" = "yes" -o "$a52bin" = "yes" -o "$faadbin" = "yes"; then
+if enabled_any vhook a52bin faadbin; then
add_extralibs $ldl
fi
check_ldflags -export-dynamic
fi
+if enabled audio_beos; then
+ add_extralibs "-lmedia -lbe"
+fi
+
##########################################
# imlib check
EOF
# check for video4linux2 --- V4L2_PIX_FMT_YUV420
-enabled v4l2 && check_cc <<EOF || v4l2="no"
+enabled video4linux2 && check_cc <<EOF || video4linux2="no"
#include <sys/time.h>
#include <asm/types.h>
#include <linux/videodev2.h>
add_ldflags "-p"
fi
+VHOOKCFLAGS="-fPIC $CFLAGS"
+test "$needmdynamicnopic" = yes && add_cflags -mdynamic-no-pic
+
# find if .align arg is power-of-two or not
if test $asmalign_pot = "unknown"; then
asmalign_pot="no"
echo "build suffix $BUILDSUF"
fi
echo "big-endian $bigendian"
-echo "inttypes.h $inttypes"
-echo "broken inttypes.h $emu_fast_int"
if test $arch = "x86_32" -o $arch = "x86_64"; then
echo "MMX enabled $mmx"
echo "CMOV enabled $cmov"
echo "Imlib2 support $imlib2"
echo "FreeType support $freetype2"
fi
-echo "Sun medialib support" $sunmlib
+echo "Sun medialib support" $mlib
echo "pthreads support" $pthreads
echo "AMR-NB float support" $amr_nb
echo "AMR-NB fixed support" $amr_nb_fixed
echo "Creating config.mak and config.h..."
-date >> config.log
-echo " $0 $FFMPEG_CONFIGURATION" >> config.log
echo "# Automatically generated by configure - do not modify!" > config.mak
echo "/* Automatically generated by configure - do not modify! */" > $TMPH
echo "#define FFMPEG_CONFIGURATION "'"'"$FFMPEG_CONFIGURATION"'"' >> $TMPH
echo "INSTALLSTRIP=" >> config.mak
fi
-VHOOKCFLAGS="-fPIC $CFLAGS"
-test "$needmdynamicnopic" = yes && add_cflags -mdynamic-no-pic
-
echo "OPTFLAGS=$CFLAGS" >> config.mak
echo "VHOOKCFLAGS=$VHOOKCFLAGS">>config.mak
echo "LDFLAGS=$LDFLAGS" >> config.mak
echo "SLIBSUF=\${BUILDSUF}$SLIBSUF" >> config.mak
echo "EXESUF=\${BUILDSUF}$EXESUF" >> config.mak
echo "TARGET_OS=$targetos" >> config.mak
-if test "$arch" = "x86_32" -o "$arch" = "x86_64" ; then
- echo "TARGET_ARCH_X86=yes" >> config.mak
- echo "#define ARCH_X86 1" >> $TMPH
-fi
-if test "$arch" = "x86_32" ; then
- echo "TARGET_ARCH_X86_32=yes" >> config.mak
- echo "#define ARCH_X86_32 1" >> $TMPH
-elif test "$arch" = "x86_64" ; then
- echo "TARGET_ARCH_X86_64=yes" >> config.mak
- echo "#define ARCH_X86_64 1" >> $TMPH
-elif test "$arch" = "armv4l" ; then
- echo "TARGET_ARCH_ARMV4L=yes" >> config.mak
- echo "#define ARCH_ARMV4L 1" >> $TMPH
-elif test "$arch" = "alpha" ; then
- echo "TARGET_ARCH_ALPHA=yes" >> config.mak
- echo "#define ARCH_ALPHA 1" >> $TMPH
-elif test "$arch" = "sparc64" ; then
- echo "TARGET_ARCH_SPARC64=yes" >> config.mak
- echo "#define ARCH_SPARC64 1" >> $TMPH
- echo "TARGET_ARCH_SPARC=yes" >> config.mak
- echo "#define ARCH_SPARC 1" >> $TMPH
-elif test "$arch" = "sparc" ; then
- echo "TARGET_ARCH_SPARC=yes" >> config.mak
- echo "#define ARCH_SPARC 1" >> $TMPH
-elif test "$arch" = "powerpc" ; then
- echo "TARGET_ARCH_POWERPC=yes" >> config.mak
- echo "#define ARCH_POWERPC 1" >> $TMPH
- if test $POWERPCMODE = "32bits"; then
- echo "#define POWERPC_MODE_32BITS 1" >> $TMPH
- else
- echo "#define POWERPC_MODE_64BITS 1" >> $TMPH
- fi
- if test "$powerpc_perf" = "yes"; then
- echo "#define POWERPC_PERFORMANCE_REPORT 1" >> $TMPH
- fi
-elif test "$arch" = "mips" ; then
- echo "TARGET_ARCH_MIPS=yes" >> config.mak
- echo "#define ARCH_MIPS 1" >> $TMPH
-elif test "$arch" = "sh4" ; then
- echo "TARGET_ARCH_SH4=yes" >> config.mak
- echo "#define ARCH_SH4 1" >> $TMPH
-elif test "$arch" = "parisc" ; then
- echo "TARGET_ARCH_PARISC=yes" >> config.mak
- echo "#define ARCH_PARISC 1" >> $TMPH
-elif test "$arch" = "s390" ; then
- echo "TARGET_ARCH_S390=yes" >> config.mak
- echo "#define ARCH_S390 1" >> $TMPH
-elif test "$arch" = "m68k" ; then
- echo "TARGET_ARCH_M68K=yes" >> config.mak
- echo "#define ARCH_M68K 1" >> $TMPH
-elif test "$arch" = "ia64" ; then
- echo "TARGET_ARCH_IA64=yes" >> config.mak
- echo "#define ARCH_IA64 1" >> $TMPH
-elif test "$arch" = "bfin" ; then
- echo "TARGET_ARCH_BFIN=yes" >> config.mak
- echo "#define ARCH_BFIN 1" >> $TMPH
-fi
-echo "#define TUNECPU $TUNECPU" >> $TMPH
+
+ucarch=`toupper $arch`
+echo "TARGET_ARCH_${ucarch}=yes" >> config.mak
+echo "#define ARCH_${ucarch} 1" >> $TMPH
+
+# special cases
+case "$arch" in
+ x86_32|x86_64)
+ echo "TARGET_ARCH_X86=yes" >> config.mak
+ echo "#define ARCH_X86 1" >> $TMPH
+ ;;
+ powerpc)
+ if test "$POWERPCMODE" = "64bits"; then
+ echo "#define POWERPC_MODE_64BITS 1" >> $TMPH
+ fi
+ if test "$powerpc_perf" = "yes"; then
+ echo "#define POWERPC_PERFORMANCE_REPORT 1" >> $TMPH
+ fi
+ ;;
+ sparc64)
+ echo "TARGET_ARCH_SPARC=yes" >> config.mak
+ echo "#define ARCH_SPARC 1" >> $TMPH
+ ;;
+esac
+
if test "$bigendian" = "yes" ; then
echo "WORDS_BIGENDIAN=yes" >> config.mak
echo "#define WORDS_BIGENDIAN 1" >> $TMPH
fi
-if test "$inttypes" != "yes" ; then
- echo "#define EMULATE_INTTYPES 1" >> $TMPH
-fi
-if test "$emu_fast_int" = "yes" ; then
- echo "#define EMULATE_FAST_INT 1" >> $TMPH
-fi
if test "$mmx" = "yes" ; then
echo "TARGET_MMX=yes" >> config.mak
echo "#define HAVE_MMX 1" >> $TMPH
echo "#define HAVE_MMI 1" >> $TMPH
fi
-if test "$dcbzl" = "yes" ; then
- echo "#define HAVE_DCBZL 1" >> $TMPH
-else
- echo "#undef HAVE_DCBZL" >> $TMPH
-fi
-
if test "$altivec" = "yes" ; then
echo "TARGET_ALTIVEC=yes" >> config.mak
echo "#define HAVE_ALTIVEC 1" >> $TMPH
- if test "$_altivec_h" = "yes" ; then
- echo "#define HAVE_ALTIVEC_H 1" >> $TMPH
- else
- echo "#undef HAVE_ALTIVEC_H" >> $TMPH
- fi
-fi
-if test "$gprof" = "yes" ; then
- echo "#define HAVE_GPROF 1" >> $TMPH
-fi
-if test "$localtime_r" = "yes" ; then
- echo "#define HAVE_LOCALTIME_R 1" >> $TMPH
-fi
-if test "$imlib2" = "yes" ; then
- echo "HAVE_IMLIB2=yes" >> config.mak
-fi
-if test "$freetype2" = "yes" ; then
- echo "HAVE_FREETYPE2=yes" >> config.mak
-fi
-if test "$sunmlib" = "yes" ; then
- echo "HAVE_MLIB=yes" >> config.mak
- echo "#define HAVE_MLIB 1" >> $TMPH
-fi
-if test "$pthreads" = "yes" ; then
- echo "HAVE_PTHREADS=yes" >> config.mak
- echo "#define HAVE_PTHREADS 1" >> $TMPH
- echo "#define HAVE_THREADS 1" >> $TMPH
fi
+
if test "$sdl" = "yes" ; then
- echo "HAVE_SDL=yes" >> config.mak
echo "SDL_LIBS=`"${SDL_CONFIG}" --libs`" >> config.mak
echo "SDL_CFLAGS=`"${SDL_CONFIG}" --cflags`" >> config.mak
- if test "$sdl_video_size" = "yes"; then
- echo "#define HAVE_SDL_VIDEO_SIZE 1" >> $TMPH
- fi
fi
if test "$texi2html" = "yes"; then
echo "BUILD_DOC=yes" >> config.mak
fi
-if test "$have_lrintf" = "yes" ; then
- echo "#define HAVE_LRINTF 1" >> $TMPH
-fi
-if test "$vhook" = "yes" ; then
- echo "CONFIG_VHOOK=yes" >> config.mak
- echo "#define CONFIG_VHOOK 1" >> $TMPH
-fi
sws_version=`grep '#define LIBSWSCALE_VERSION ' "$source_path/libswscale/swscale.h" | sed 's/[^0-9\.]//g'`
pp_version=`grep '#define LIBPOSTPROC_VERSION ' "$source_path/libpostproc/postprocess.h" | sed 's/[^0-9\.]//g'`
echo "LIB_INSTALL_EXTRA_CMD=${LIB_INSTALL_EXTRA_CMD}" >> config.mak
echo "EXTRALIBS=$extralibs" >> config.mak
-# If you do not want to use encoders, disable them.
-if echo "$ENCODER_LIST" | grep -q encoder; then
- echo "#define CONFIG_ENCODERS 1" >> $TMPH
- echo "CONFIG_ENCODERS=yes" >> config.mak
-fi
-
-# If you do not want to use decoders, disable them.
-if echo "$DECODER_LIST" | grep -q decoder; then
- echo "#define CONFIG_DECODERS 1" >> $TMPH
- echo "CONFIG_DECODERS=yes" >> config.mak
-fi
-
-# muxers
-if echo "$MUXER_LIST" | grep -q muxer; then
- echo "#define CONFIG_MUXERS 1" >> $TMPH
- echo "CONFIG_MUXERS=yes" >> config.mak
-fi
-
-# demuxers
-if echo "$DEMUXER_LIST" | grep -q demuxer; then
- echo "#define CONFIG_DEMUXERS 1" >> $TMPH
- echo "CONFIG_DEMUXERS=yes" >> config.mak
-fi
-
-# AC3
-if test "$a52" = "yes" ; then
- echo "#define CONFIG_A52 1" >> $TMPH
- echo "CONFIG_A52=yes" >> config.mak
-
- if test "$a52bin" = "yes" ; then
- echo "#define CONFIG_A52BIN 1" >> $TMPH
- echo "CONFIG_A52BIN=yes" >> config.mak
- fi
-fi
-
-# DTS
-if test "$dts" = "yes" ; then
- echo "#define CONFIG_DTS 1" >> $TMPH
- echo "CONFIG_DTS=yes" >> config.mak
-fi
-
-# PP
-if test "$pp" = "yes" ; then
- echo "#define CONFIG_PP 1" >> $TMPH
- echo "CONFIG_PP=yes" >> config.mak
-fi
-
-if test "$swscaler" = "yes" ; then
- echo "#define CONFIG_SWSCALER 1" >> $TMPH
- echo "CONFIG_SWSCALER=yes" >> config.mak
-fi
-
-# MPEG audio high precision mode
-if test "$mpegaudio_hp" = "yes" ; then
- echo "#define CONFIG_MPEGAUDIO_HP 1" >> $TMPH
-fi
-
-if test "$v4l" = "yes" ; then
- echo "#define CONFIG_VIDEO4LINUX 1" >> $TMPH
- echo "CONFIG_VIDEO4LINUX=yes" >> config.mak
-fi
-
-if test "$v4l2" = "yes" ; then
- echo "#define CONFIG_VIDEO4LINUX2 1" >> $TMPH
- echo "CONFIG_VIDEO4LINUX2=yes" >> config.mak
-fi
-
-if test "$bktr" = "yes" ; then
- echo "#define CONFIG_BKTR 1" >> $TMPH
- echo "CONFIG_BKTR=yes" >> config.mak
-fi
-
-if test "$dv1394" = "yes" ; then
- echo "#define CONFIG_DV1394 1" >> $TMPH
- echo "CONFIG_DV1394=yes" >> config.mak
-fi
-
-if test "$dc1394" = "yes" ; then
- echo "#define CONFIG_DC1394 1" >> $TMPH
- echo "CONFIG_DC1394=yes" >> config.mak
-fi
-
-if test "$dlopen" = "yes" ; then
- echo "#define HAVE_DLOPEN 1" >> $TMPH
-fi
-
-if test "$dlfcn" = "yes" ; then
- echo "#define HAVE_DLFCN 1" >> $TMPH
-fi
-
-if test "$audio_oss" = "yes" ; then
- echo "#define CONFIG_AUDIO_OSS 1" >> $TMPH
- echo "CONFIG_AUDIO_OSS=yes" >> config.mak
-fi
-
-if test "$audio_beos" = "yes" ; then
- echo "#define CONFIG_AUDIO_BEOS 1" >> $TMPH
- echo "CONFIG_AUDIO_BEOS=yes" >> config.mak
-fi
-
-if test "$network" = "yes" ; then
- echo "#define CONFIG_NETWORK 1" >> $TMPH
- echo "CONFIG_NETWORK=yes" >> config.mak
-fi
-
-if test "$ipv6" = "yes" ; then
- echo "#define CONFIG_IPV6 1" >> $TMPH
-fi
-
-if test "$zlib" = "yes" ; then
- echo "#define CONFIG_ZLIB 1" >> $TMPH
- echo "CONFIG_ZLIB=yes" >> config.mak
-fi
-
-if test "$libgsm" = "yes" ; then
- echo "#define CONFIG_LIBGSM 1" >> $TMPH
- echo "CONFIG_LIBGSM=yes" >> config.mak
-fi
-
-if test "$mp3lame" = "yes" ; then
- echo "#define CONFIG_MP3LAME 1" >> $TMPH
- echo "CONFIG_MP3LAME=yes" >> config.mak
-fi
-
-if test "$libnut" = "yes" ; then
- echo "#define CONFIG_LIBNUT 1" >> $TMPH
- echo "CONFIG_LIBNUT=yes" >> config.mak
-fi
-
-if test "$libogg" = "yes" ; then
- echo "#define CONFIG_LIBOGG 1" >> $TMPH
- echo "CONFIG_LIBOGG=yes" >> config.mak
-fi
-
-if test "$libvorbis" = "yes" ; then
- echo "#define CONFIG_LIBVORBIS 1" >> $TMPH
- echo "CONFIG_LIBVORBIS=yes" >> config.mak
-fi
-
-if test "$faad" = "yes" ; then
- echo "#define CONFIG_FAAD 1" >> $TMPH
- echo "CONFIG_FAAD=yes" >> config.mak
-fi
-
-if test "$faadbin" = "yes" ; then
- echo "#define CONFIG_FAADBIN 1" >> $TMPH
- echo "CONFIG_FAADBIN=yes" >> config.mak
-fi
-
-if test "$faac" = "yes" ; then
- echo "#define CONFIG_FAAC 1" >> $TMPH
- echo "CONFIG_FAAC=yes" >> config.mak
-fi
+enabled_any $ENCODER_LIST && enable encoders
+enabled_any $DECODER_LIST && enable decoders
+enabled_any $MUXER_LIST && enable muxers
+enabled_any $DEMUXER_LIST && enable demuxers
-if test "$xvid" = "yes" ; then
- echo "#define CONFIG_XVID 1" >> $TMPH
- echo "CONFIG_XVID=yes" >> config.mak
-fi
-
-if test "$x264" = "yes" ; then
- echo "#define CONFIG_X264 1" >> $TMPH
- echo "CONFIG_X264=yes" >> config.mak
-fi
-
-if test "$avisynth" = "yes" ; then
- echo "#define CONFIG_AVISYNTH 1" >> $TMPH
- echo "CONFIG_AVISYNTH=yes" >> config.mak
-fi
-
-if test "$mingw32" = "yes" ; then
- echo "CONFIG_MINGW=yes" >> config.mak
- echo "HAVE_W32THREADS=yes" >> config.mak
- echo "#define HAVE_W32THREADS 1" >> $TMPH
- echo "#define HAVE_THREADS 1" >> $TMPH
- echo "#ifndef __MINGW32__" >> $TMPH
- echo "#define __MINGW32__ 1" >> $TMPH
- echo "#endif" >> $TMPH
-fi
-
-if test "$mingwce" = "yes" ; then
- echo "CONFIG_MINGW=yes" >> config.mak
- echo "#define CONFIG_WINCE 1" >> $TMPH
- echo "CONFIG_WINCE=yes" >> config.mak
- echo "#ifndef __MINGW32__" >> $TMPH
- echo "#define __MINGW32__ 1" >> $TMPH
- echo "#endif" >> $TMPH
-fi
-
-if test "$os2" = "yes" ; then
- echo "#define CONFIG_OS2 1" >> $TMPH
- echo "CONFIG_OS2=yes" >> config.mak
- echo "HAVE_OS2THREADS=yes" >> config.mak
- echo "#define HAVE_OS2THREADS 1" >> $TMPH
- echo "#define HAVE_THREADS 1" >> $TMPH
-fi
-
-if test "$targetos" = "SunOS" ; then
- echo "#define CONFIG_SUNOS 1" >> $TMPH
-fi
+enabled_any pthreads beosthreads os2threads w32threads && enable threads
-if test "$targetos" = "BeOS" ; then
- echo "HAVE_BEOSTHREADS=yes" >> config.mak
- echo "#define HAVE_BEOSTHREADS 1" >> $TMPH
- echo "#define HAVE_THREADS 1" >> $TMPH
-fi
+print_config HAVE_ $TMPH config.mak $HAVE_LIST
+print_config CONFIG_ $TMPH config.mak $CONFIG_LIST
if test "$targetos" = "Darwin"; then
echo "#define CONFIG_DARWIN 1" >> $TMPH
- echo "CONFIG_DARWIN=yes" >> config.mak
fi
-if test "$malloc_h" = "yes" ; then
- echo "#define HAVE_MALLOC_H 1" >> $TMPH
-else
- echo "#undef HAVE_MALLOC_H" >> $TMPH
-fi
-
-if test "$_memalign" = "yes" ; then
- echo "#define HAVE_MEMALIGN 1" >> $TMPH
-else
- echo "#undef HAVE_MEMALIGN" >> $TMPH
-fi
-
-if test "$memalignhack" = "yes" ; then
- echo "#define MEMALIGN_HACK 1" >> $TMPH
-fi
-
-if test "$byteswap_h" = "yes"; then
- echo "#define HAVE_BYTESWAP_H 1" >> $TMPH
-fi
+echo "#define restrict $_restrict" >> $TMPH
-if test "$beos_netserver" = "yes" ; then
- echo "#define CONFIG_BEOS_NETSERVER 1" >> $TMPH
- echo "CONFIG_BEOS_NETSERVER=yes" >> config.mak
+if test "$optimize" = "small"; then
+ echo "#define always_inline" >> $TMPH
+ echo "#define CONFIG_SMALL 1" >> $TMPH
fi
-if test "$need_inet_aton" = "yes" ; then
- echo "NEED_INET_ATON=yes" >> config.mak
-fi
+echo "SRC_PATH=\"$source_path\"" >> config.mak
+echo "SRC_PATH_BARE=$source_path" >> config.mak
+echo "BUILD_ROOT=\"$PWD\"" >> config.mak
-if test "$protocols" = "yes" ; then
- echo "#define CONFIG_PROTOCOLS 1" >> $TMPH
- echo "CONFIG_PROTOCOLS=yes" >> config.mak
+if test "$amr_if2" = "yes" ; then
+ echo "AMR_CFLAGS=-DIF2=1" >> config.mak
fi
-if test "$ffmpeg" = "yes" ; then
- echo "#define CONFIG_FFMPEG 1" >> $TMPH
- echo "CONFIG_FFMPEG=yes" >> config.mak
+# Apparently it's not possible to portably echo a backslash.
+if test "$asmalign_pot" = "yes" ; then
+ printf '#define ASMALIGN(ZEROBITS) ".align " #ZEROBITS "\\n\\t"\n' >> $TMPH
+else
+ printf '#define ASMALIGN(ZEROBITS) ".align 1<<" #ZEROBITS "\\n\\t"\n' >> $TMPH
fi
-if test "$ffserver" = "yes" ; then
- echo "#define CONFIG_FFSERVER 1" >> $TMPH
- echo "CONFIG_FFSERVER=yes" >> config.mak
-fi
-if test "$ffplay" = "yes" ; then
- echo "CONFIG_FFPLAY=yes" >> config.mak
-fi
+for codec in $DECODER_LIST $ENCODER_LIST $PARSER_LIST $DEMUXER_LIST $MUXER_LIST; do
+ ucname="`toupper $codec`"
+ config_name="CONFIG_$ucname"
+ enabled_name="ENABLE_$ucname"
+ if enabled $codec; then
+ echo "#define $config_name 1" >> $TMPH
+ echo "#define $enabled_name 1" >> $TMPH
+ echo "$config_name=yes" >> config.mak
+ else
+ echo "#define $enabled_name 0" >> $TMPH
+ fi
+done
-if test "$gpl" = "yes" ; then
- echo "#define CONFIG_GPL 1" >> $TMPH
- echo "CONFIG_GPL=yes" >> config.mak
+# Do not overwrite config.h if unchanged to avoid superfluous rebuilds.
+if ! cmp -s $TMPH config.h; then
+ mv -f $TMPH config.h
+else
+ echo "config.h is unchanged"
fi
-echo "#define restrict $_restrict" >> $TMPH
-
-if test "$optimize" = "small"; then
- echo "#define always_inline" >> $TMPH
- echo "#define CONFIG_SMALL 1" >> $TMPH
-fi
+rm -f $TMPO $TMPC $TMPE $TMPS $TMPH
# build tree in object directory if source path is different from current one
if test "$source_path_used" = "yes" ; then
ln -sf "$source_path/$f" $f
done
fi
-echo "SRC_PATH=\"$source_path\"" >> config.mak
-echo "SRC_PATH_BARE=$source_path" >> config.mak
-echo "BUILD_ROOT=\"$PWD\"" >> config.mak
-
-if test "$amr" = "yes" ; then
- echo "#define CONFIG_AMR 1" >> $TMPH
- echo "CONFIG_AMR=yes" >> config.mak
-fi
-
-if test "$amr_wb" = "yes" ; then
- echo "#define CONFIG_AMR_WB 1" >> $TMPH
- echo "CONFIG_AMR_WB=yes" >> config.mak
- echo
- echo "AMR WB FLOAT NOTICE ! Make sure you have downloaded TS26.204"
- echo "V5.1.0 from "
- echo "http://www.3gpp.org/ftp/Specs/archive/26_series/26.204/26204-510.zip"
- echo "and extracted the source to libavcodec/amrwb_float"
-fi
-
-if test "$amr_nb" = "yes" ; then
- echo "#define CONFIG_AMR_NB 1" >> $TMPH
- echo "CONFIG_AMR_NB=yes" >> config.mak
- echo
- echo "AMR NB FLOAT NOTICE ! Make sure you have downloaded TS26.104"
- echo "REL-5 V5.1.0 from "
- echo "http://www.3gpp.org/ftp/Specs/archive/26_series/26.104/26104-510.zip"
- echo "and extracted the source to libavcodec/amr_float"
- echo "If you try this on alpha, you may need to change Word32 to int in amr/typedef.h"
-fi
-
-if test "$amr_nb_fixed" = "yes" ; then
- echo "#define CONFIG_AMR_NB_FIXED 1" >> $TMPH
- echo "CONFIG_AMR_NB_FIXED=yes" >> config.mak
- echo
- echo "AMR NB FIXED POINT NOTICE! Make sure you have downloaded TS26.073 "
- echo "REL-5 version 5.1.0 from "
- echo "http://www.3gpp.org/ftp/Specs/archive/26_series/26.073/26073-510.zip"
- echo "and extracted src to libavcodec/amr"
- echo "You must also add -DMMS_IO and remove -pedantic-errors to/from CFLAGS in libavcodec/amr/makefile."
- echo "i.e. CFLAGS = -Wall -I. \$(CFLAGS_\$(MODE)) -D\$(VAD) -DMMS_IO"
-fi
-
-if test "$amr_if2" = "yes" ; then
- echo "AMR_CFLAGS=-DIF2=1" >> config.mak
-fi
-
-# Apparently it's not possible to portably echo a backslash.
-if test "$asmalign_pot" = "yes" ; then
- printf '#define ASMALIGN(ZEROBITS) ".align " #ZEROBITS "\\n\\t"\n' >> $TMPH
-else
- printf '#define ASMALIGN(ZEROBITS) ".align 1<<" #ZEROBITS "\\n\\t"\n' >> $TMPH
-fi
-
-
-# "tr '[a-z]' '[A-Z]'" is a workaround for Solaris tr not grokking "tr a-z A-Z"
-for codec in $DECODER_LIST $ENCODER_LIST $PARSER_LIST $DEMUXER_LIST $MUXER_LIST; do
- ucname="`echo $codec | tr '[a-z]' '[A-Z]'`"
- config_name="CONFIG_$ucname"
- enabled_name="ENABLE_$ucname"
- if enabled $codec; then
- echo "#define $config_name 1" >> $TMPH
- echo "#define $enabled_name 1" >> $TMPH
- echo "$config_name=yes" >> config.mak
- else
- echo "#define $enabled_name 0" >> $TMPH
- fi
-done
-
-# Do not overwrite config.h if unchanged to avoid superfluous rebuilds.
-diff $TMPH config.h >/dev/null 2>&1
-if test "$?" != "0" ; then
- mv -f $TMPH config.h
-else
- echo "config.h is unchanged"
-fi
-
-rm -f $TMPO $TMPC $TMPE $TMPS $TMPH
-
# build pkg-config files libav*.pc and libpostproc.pc
# libavutil.pc