echo " --disable-logging do not log configure debug information"
echo " --prefix=PREFIX install in PREFIX [$prefix]"
echo " --bindir=DIR install binaries in DIR [PREFIX/bin]"
+ echo " --datadir=DIR install data files in DIR [PREFIX/share/ffmpeg]"
echo " --libdir=DIR install libs in DIR [PREFIX/lib]"
echo " --shlibdir=DIR install shared libs in DIR [PREFIX/lib]"
echo " --incdir=DIR install includes in DIR [PREFIX/include]"
echo " --mandir=DIR install man page in DIR [PREFIX/share/man]"
+ echo
+ echo "Configuration options:"
echo " --disable-static do not build static libraries [no]"
echo " --enable-shared build shared libraries [no]"
echo " --enable-gpl allow use of GPL code, the resulting libs"
echo " and binaries will be under GPL [no]"
echo " --enable-nonfree allow use of nonfree code, the resulting libs"
echo " and binaries will be unredistributable [no]"
+ echo " --disable-ffmpeg disable ffmpeg build"
+ echo " --disable-ffplay disable ffplay build"
+ echo " --disable-ffserver disable ffserver build"
echo " --enable-postproc enable GPLed postprocessing support [no]"
echo " --enable-swscale enable GPLed software scaler support [no]"
echo " --enable-avfilter video filter support (replaces vhook) [no]"
echo " --enable-w32threads use Win32 threads [no]"
echo " --enable-x11grab enable X11 grabbing [no]"
echo " --enable-vdpau enable VDPAU support [no]"
- echo " --enable-xvmc enable XvMC support [no]"
+ echo " --disable-network disable network support [no]"
+ echo " --disable-ipv6 disable IPv6 support [no]"
+ echo " --disable-mpegaudio-hp faster (but less accurate) MPEG audio decoding [no]"
+ echo " --enable-gray enable full grayscale support (slower color)"
+ echo " --enable-fastdiv enable table-based division"
+ echo " --enable-small optimize for size instead of speed"
+ echo " --disable-aandct disable AAN DCT code"
+ echo " --disable-fft disable FFT code"
+ echo " --disable-golomb disable Golomb code"
+ echo " --disable-mdct disable MDCT code"
+ echo " --disable-rdft disable RDFT code"
+ echo " --enable-hardcoded-tables use hardcoded tables instead of runtime generation"
+ echo " --enable-memalign-hack emulate memalign, interferes with memory debuggers"
+ echo " --enable-beos-netserver enable BeOS netserver"
+ echo " --disable-encoder=NAME disable encoder NAME"
+ echo " --enable-encoder=NAME enable encoder NAME"
+ echo " --disable-encoders disable all encoders"
+ echo " --disable-decoder=NAME disable decoder NAME"
+ echo " --enable-decoder=NAME enable decoder NAME"
+ echo " --disable-decoders disable all decoders"
+ echo " --disable-muxer=NAME disable muxer NAME"
+ echo " --enable-muxer=NAME enable muxer NAME"
+ echo " --disable-muxers disable all muxers"
+ echo " --disable-demuxer=NAME disable demuxer NAME"
+ echo " --enable-demuxer=NAME enable demuxer NAME"
+ echo " --disable-demuxers disable all demuxers"
+ echo " --enable-parser=NAME enable parser NAME"
+ echo " --disable-parser=NAME disable parser NAME"
+ echo " --disable-parsers disable all parsers"
+ echo " --enable-bsf=NAME enable bitstream filter NAME"
+ echo " --disable-bsf=NAME disable bitstream filter NAME"
+ echo " --disable-bsfs disable all bitstream filters"
+ echo " --enable-protocol=NAME enable protocol NAME"
+ echo " --disable-protocol=NAME disable protocol NAME"
+ echo " --disable-protocols disable all protocols"
+ echo " --disable-indevs disable input devices"
+ echo " --disable-outdevs disable output devices"
+ echo " --disable-devices disable all devices"
+ echo " --enable-filter=NAME enable filter NAME"
+ echo " --disable-filter=NAME disable filter NAME"
+ echo " --disable-filters disable all filters"
+ echo " --list-decoders show all available decoders"
+ echo " --list-encoders show all available encoders"
+ echo " --list-muxers show all available muxers"
+ echo " --list-demuxers show all available demuxers"
+ echo " --list-parsers show all available parsers"
+ echo " --list-protocols show all available protocols"
+ echo " --list-bsfs show all available bitstream filters"
+ echo " --list-indevs show all available input devices"
+ echo " --list-outdevs show all available output devices"
+ echo " --list-filters show all available filters"
echo
echo "External library support:"
echo " --enable-avisynth enable reading of AVISynth script files [no]"
echo " --enable-libmp3lame enable MP3 encoding via libmp3lame [no]"
echo " --enable-libnut enable NUT (de)muxing via libnut,"
echo " native (de)muxer exists [no]"
+ echo " --enable-libopenjpeg enable JPEG 2000 decoding via OpenJPEG [no]"
echo " --enable-libschroedinger enable Dirac support via libschroedinger [no]"
echo " --enable-libspeex enable Speex decoding via libspeex [no]"
echo " --enable-libtheora enable Theora encoding via libtheora [no]"
echo " --source-path=PATH path to source code [$source_path]"
echo " --cross-prefix=PREFIX use PREFIX for compilation tools [$cross_prefix]"
echo " --enable-cross-compile assume a cross-compiler is used"
+ echo " --sysroot=PATH root of cross-build tree"
+ echo " --sysinclude=PATH location of cross-build system headers"
echo " --target-os=OS compiler targets OS [$target_os]"
echo " --target-exec=CMD command to run executables on target"
echo " --target-path=DIR path to view of build directory on target"
echo " --enable-powerpc-perf enable performance report on PPC"
echo " (requires enabling PMC)"
echo " --disable-altivec disable AltiVec optimizations"
+ echo " --disable-amd3dnow disable 3DNow! optimizations"
+ echo " --disable-amd3dnowext disable 3DNow! extended optimizations"
echo " --disable-mmx disable MMX optimizations"
echo " --disable-mmx2 disable MMX2 optimizations"
echo " --disable-sse disable SSE optimizations"
echo " --disable-mmi disable MMI optimizations"
echo " --disable-neon disable neon optimizations"
echo " --disable-vis disable VIS optimizations"
- echo " --disable-network disable network support [no]"
- echo " --disable-ipv6 disable IPv6 support [no]"
- echo " --disable-mpegaudio-hp faster (but less accurate) MPEG audio decoding [no]"
- echo " --disable-aandct disable AAN DCT code"
- echo " --disable-fft disable FFT code"
- echo " --disable-golomb disable Golomb code"
- echo " --disable-mdct disable MDCT code"
- echo " --enable-gray enable full grayscale support (slower color)"
- echo " --disable-fastdiv disable table-based division"
- echo " --disable-ffmpeg disable ffmpeg build"
- echo " --disable-ffplay disable ffplay build"
- echo " --disable-ffserver disable ffserver build"
- echo " --enable-small optimize for size instead of speed"
- echo " --enable-hardcoded-tables use hardcoded tables instead of runtime generation"
- echo " --enable-memalign-hack emulate memalign, interferes with memory debuggers"
- echo " --enable-beos-netserver enable BeOS netserver"
- echo " --disable-encoder=NAME disable encoder NAME"
- echo " --enable-encoder=NAME enable encoder NAME"
- echo " --disable-encoders disable all encoders"
- echo " --disable-decoder=NAME disable decoder NAME"
- echo " --enable-decoder=NAME enable decoder NAME"
- echo " --disable-decoders disable all decoders"
- echo " --disable-muxer=NAME disable muxer NAME"
- echo " --enable-muxer=NAME enable muxer NAME"
- echo " --disable-muxers disable all muxers"
- echo " --disable-demuxer=NAME disable demuxer NAME"
- echo " --enable-demuxer=NAME enable demuxer NAME"
- echo " --disable-demuxers disable all demuxers"
- echo " --enable-parser=NAME enable parser NAME"
- echo " --disable-parser=NAME disable parser NAME"
- echo " --disable-parsers disable all parsers"
- echo " --enable-bsf=NAME enable bitstream filter NAME"
- echo " --disable-bsf=NAME disable bitstream filter NAME"
- echo " --disable-bsfs disable all bitstream filters"
- echo " --enable-protocol=NAME enable protocol NAME"
- echo " --disable-protocol=NAME disable protocol NAME"
- echo " --disable-protocols disable all protocols"
- echo " --disable-indevs disable input devices"
- echo " --disable-outdevs disable output devices"
- echo " --disable-devices disable all devices"
- echo " --enable-filter=NAME enable filter NAME"
- echo " --disable-filter=NAME disable filter NAME"
- echo " --disable-filters disable all filters"
- echo " --list-decoders show all available decoders"
- echo " --list-encoders show all available encoders"
- echo " --list-muxers show all available muxers"
- echo " --list-demuxers show all available demuxers"
- echo " --list-parsers show all available parsers"
- echo " --list-protocols show all available protocols"
- echo " --list-bsfs show all available bitstream filters"
- echo " --list-indevs show all available input devices"
- echo " --list-outdevs show all available output devices"
- echo " --list-filters show all available filters"
+ echo " --disable-yasm disable use of yasm assembler"
echo
echo "Developer options (useful when working on FFmpeg itself):"
echo " --disable-debug disable debugging symbols"
echo "$@" | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz
}
+c_escape(){
+ echo "$*" | sed 's/["\\]/\\\0/g'
+}
+
set_all(){
value=$1
shift
libgsm
libmp3lame
libnut
+ libopenjpeg
libschroedinger
libspeex
libtheora
nonfree
postproc
powerpc_perf
+ rdft
shared
small
static
vdpau
vhook
x11grab
- xvmc
zlib
"
ARCH_EXT_LIST='
altivec
+ amd3dnow
+ amd3dnowext
armv5te
armv6
armv6t2
HAVE_LIST="
$ARCH_EXT_LIST
$THREADS_LIST
+ alsa_asoundlib_h
altivec_h
arpa_inet_h
bswap
sys_select_h
sys_soundcard_h
sys_videoio_h
+ ten_operands
termios_h
threads
truncf
# options emitted with CONFIG_ prefix but not available on command line
CONFIG_EXTRA="
- fft_mmx
oldscaler
"
logging
optimizations
stripping
+ yasm
"
PATHS_LIST='
bindir
+ datadir
incdir
libdir
mandir
logfile
nm
source_path
+ sysinclude
+ sysroot
target_exec
target_os
target_path
# architecture extensions
altivec_deps="ppc"
+amd3dnow_deps="mmx"
+amd3dnowext_deps="amd3dnow"
armv5te_deps="arm"
armv6_deps="arm"
armv6t2_deps="arm"
iwmmxt_deps="arm"
mmi_deps="mips"
mmx_deps="x86"
-mmx2_deps="x86 mmx"
+mmx2_deps="mmx"
neon_deps="arm"
ppc4xx_deps="ppc"
sse_deps="mmx"
-ssse3_deps="x86 sse"
+ssse3_deps="sse"
vis_deps="sparc"
# common features
-fft_suggest="fft_mmx"
-fft_mmx_deps="mmx yasm"
oldscaler_deps="!swscale"
# decoders / encoders
eac3_decoder_deps="gpl"
eac3_decoder_select="fft mdct"
eatgq_decoder_select="aandct"
+eatqi_decoder_select="aandct"
ffv1_decoder_select="golomb"
flac_decoder_select="golomb"
flac_encoder_select="golomb"
mpeg4_encoder_select="aandct"
mpeg_vdpau_decoder_deps="vdpau"
mpeg1_vdpau_decoder_deps="vdpau"
-mpeg_xvmc_decoder_deps="xvmc X11_extensions_XvMClib_h"
+mpeg_xvmc_decoder_deps="X11_extensions_XvMClib_h"
msmpeg4v1_encoder_select="aandct"
msmpeg4v2_encoder_select="aandct"
msmpeg4v3_encoder_select="aandct"
nellymoser_encoder_select="fft mdct"
png_decoder_select="zlib"
png_encoder_select="zlib"
-qdm2_decoder_select="fft mdct"
+qdm2_decoder_select="fft mdct rdft"
rv10_encoder_select="aandct"
rv20_encoder_select="aandct"
+rv30_decoder_select="golomb"
+rv40_decoder_select="golomb"
shorten_decoder_select="golomb"
sonic_decoder_select="golomb"
sonic_encoder_select="golomb"
libgsm_ms_decoder_deps="libgsm"
libgsm_ms_encoder_deps="libgsm"
libmp3lame_encoder_deps="libmp3lame"
+libopenjpeg_decoder_deps="libopenjpeg"
libschroedinger_decoder_deps="libschroedinger"
libschroedinger_encoder_deps="libschroedinger"
libspeex_decoder_deps="libspeex"
# demuxers / muxers
ac3_demuxer_deps="ac3_parser"
+alsa_demuxer_deps="alsa_asoundlib_h snd_pcm_htimestamp"
+alsa_demuxer_extralibs="-lasound"
+alsa_muxer_deps="alsa_asoundlib_h"
+alsa_muxer_extralibs="-lasound"
audio_beos_demuxer_deps="audio_beos"
audio_beos_demuxer_extralibs="-lmedia -lbe"
audio_beos_muxer_deps="audio_beos"
x11_grab_device_demuxer_extralibs="-lX11 -lXext"
# protocols
+gopher_protocol_deps="network"
http_protocol_deps="network"
rtp_protocol_deps="udp_protocol"
tcp_protocol_deps="network"
# installation paths
prefix_default="/usr/local"
bindir_default='${prefix}/bin'
+datadir_default='${prefix}/share/ffmpeg'
incdir_default='${prefix}/include'
libdir_default='${prefix}/lib'
mandir_default='${prefix}/share/man'
# gcc stupidly only outputs the basename of targets with -MM, but we need the
# full relative path for objects in subdirectories for non-recursive Make.
-DEPEND_CMD='$(CC) $(CFLAGS) -MM -MG $< | sed -e "/^\#.*/d" -e "s,^[[:space:]]*$(*F)\\.o,$(@D)/$(*F).o," -e "s,\\([[:space:]]\\)\\(version\\.h\\),\\1\$$(BUILD_ROOT_REL)/\\2,"'
+DEPEND_CMD='$(CC) $(CFLAGS) -MM $< | sed -e "/^\#.*/d" -e "s,^[[:space:]]*$(*F)\\.o,$(@D)/$(*F).o,"'
# find source path
source_path="`dirname \"$0\"`"
ranlib="${cross_prefix}${ranlib}"
strip="${cross_prefix}${strip}"
-set_default cc nm
+sysinclude_default="${sysroot}/usr/include"
+
+set_default cc nm sysinclude
enabled cross_compile || host_cc_default=$cc
set_default host_cc
+case $target_os in
+ mingw32*|cygwin*|*-dos|freedos|opendos|os/2*) EXESUF=.exe ;;
+esac
+
# set temporary file name
: ${TMPDIR:=$TEMPDIR}
: ${TMPDIR:=$TMP}
TMPS="${TMPDIR}/ffmpeg-conf-${RANDOM}-$$-${RANDOM}.S"
TMPSH="${TMPDIR}/ffmpeg-conf-${RANDOM}-$$-${RANDOM}.sh"
+# make sure we can execute files in $TMPDIR
+cat > $TMPSH 2>> $logfile <<EOF
+#! /bin/sh
+EOF
+chmod +x $TMPSH >> $logfile 2>&1
+if ! $TMPSH >> $logfile 2>&1; then
+ cat <<EOF
+Unable to create and execute files in $TMPDIR. Set the TMPDIR environment
+variable to another directory and make sure that it is not mounted noexec.
+EOF
+ die "Sanity test failed."
+fi
+rm $TMPSH
+
+if $cc --version 2>/dev/null | grep -q '(GCC)'; then
+ cc_type=gcc
+elif $cc --version 2>/dev/null | grep -q Intel; then
+ cc_type=icc
+elif $cc -v 2>&1 | grep -q xlc; then
+ cc_type=xlc
+fi
+
+test -n "$cc_type" && enable $cc_type || echolog "Unknown C compiler $cc"
+
+if test -n "$sysroot"; then
+ case "$cc_type" in
+ gcc)
+ add_cflags --sysroot="$sysroot"
+ add_ldflags --sysroot="$sysroot"
+ ;;
+ esac
+fi
+
+# compiler sanity check
+check_exec <<EOF
+int main(void){ return 0; }
+EOF
+if test "$?" != 0; then
+ echo "$cc is unable to create an executable file."
+ if test -z "$cross_prefix" && ! enabled cross_compile ; then
+ echo "If $cc is a cross-compiler, use the --enable-cross-compile option."
+ echo "Only do this if you know what cross compiling means."
+ fi
+ die "C compiler test failed."
+fi
+
check_cflags -std=c99
case "$arch" in
- i386|i486|i586|i686|i86pc|BePC)
- arch="x86"
- subarch="x86_32"
- enable fast_unaligned
- ;;
- x86_64|amd64)
- arch="x86"
- subarch="x86_32"
- enable cmov
- enable fast_cmov
- enable fast_unaligned
- check_cc <<EOF && enable fast_64bit && subarch="x86_64"
- int test[sizeof(char*) - 7];
-EOF
- ;;
- arm|armv[4567]*l)
- arch="arm"
- ;;
alpha)
arch="alpha"
enable fast_64bit
check_cflags -mieee
;;
- "Power Macintosh"|ppc|powerpc)
- arch="ppc"
- enable fast_unaligned
+ arm|armv[4567]*l)
+ arch="arm"
;;
- ppc64)
- arch="ppc"
+ avr32)
+ ;;
+ bfin)
+ arch="bfin"
+ ;;
+ ia64)
+ arch="ia64"
enable fast_64bit
- enable fast_unaligned
+ ;;
+ m68k)
+ arch="m68k"
;;
mips|mipsel|IP*)
arch="mips"
arch="mips"
enable fast_64bit
;;
- sun4u|sparc64)
- arch="sparc"
- subarch="sparc64"
- enable fast_64bit
- ;;
- sparc)
- arch="sparc"
- ;;
- sh4|sh)
- arch="sh4"
- ;;
parisc|hppa)
arch="parisc"
;;
arch="parisc"
enable fast_64bit
;;
+ "Power Macintosh"|ppc|powerpc)
+ arch="ppc"
+ enable fast_unaligned
+ ;;
+ ppc64)
+ arch="ppc"
+ enable fast_64bit
+ enable fast_unaligned
+ ;;
s390|s390x)
arch="s390"
;;
- m68k)
- arch="m68k"
+ sh4|sh)
+ arch="sh4"
;;
- ia64)
- arch="ia64"
+ sparc)
+ arch="sparc"
+ ;;
+ sun4u|sparc64)
+ arch="sparc"
+ subarch="sparc64"
enable fast_64bit
;;
- bfin)
- arch="bfin"
+ i386|i486|i586|i686|i86pc|BePC)
+ arch="x86"
+ subarch="x86_32"
+ enable fast_unaligned
+ ;;
+ x86_64|amd64)
+ arch="x86"
+ subarch="x86_32"
+ enable cmov
+ enable fast_cmov
+ enable fast_unaligned
+ check_cc <<EOF && enable fast_64bit && subarch="x86_64"
+ int test[sizeof(char*) - 7];
+EOF
;;
*)
arch="unknown"
disable ffserver
SLIBPREF=""
SLIBSUF=".dll"
- EXESUF=".exe"
SLIBNAME_WITH_VERSION='$(SLIBPREF)$(FULLNAME)-$(LIBVERSION)$(SLIBSUF)'
SLIBNAME_WITH_MAJOR='$(SLIBPREF)$(FULLNAME)-$(LIBMAJOR)$(SLIBSUF)'
SLIB_EXTRA_CMD='-lib /machine:$(LIBTARGET) /def:$$(@:$(SLIBSUF)=.def) /out:$(SUBDIR)$(SLIBNAME_WITH_MAJOR:$(SLIBSUF)=.lib)'
SHFLAGS='-shared -Wl,--output-def,$$(@:$(SLIBSUF)=.def) -Wl,--enable-runtime-pseudo-reloc -Wl,--enable-auto-image-base'
objformat="win32"
enable dos_paths
- check_cpp_condition _mingw.h "(__MINGW32_MAJOR_VERSION > 3) || (__MINGW32_MAJOR_VERSION == 3 && __MINGW32_MINOR_VERSION >= 15)" ||
- die "ERROR: MinGW runtime version must be >= 3.15."
- enabled_any avisynth vfwcap_demuxer &&
- { check_cpp_condition w32api.h "(__W32API_MAJOR_VERSION > 3) || (__W32API_MAJOR_VERSION == 3 && __W32API_MINOR_VERSION >= 13)" ||
- die "ERROR: avisynth and vfwcap_demuxer require w32api version 3.13 or later."; }
+ if ! enabled x86_64; then
+ check_cpp_condition _mingw.h "(__MINGW32_MAJOR_VERSION > 3) || (__MINGW32_MAJOR_VERSION == 3 && __MINGW32_MINOR_VERSION >= 15)" ||
+ die "ERROR: MinGW runtime version must be >= 3.15."
+ enabled_any avisynth vfwcap_demuxer &&
+ { check_cpp_condition w32api.h "(__W32API_MAJOR_VERSION > 3) || (__W32API_MAJOR_VERSION == 3 && __W32API_MINOR_VERSION >= 13)" ||
+ die "ERROR: avisynth and vfwcap_demuxer require w32api version 3.13 or later."; }
+ fi
;;
cygwin*)
target_os=cygwin
VHOOKSHFLAGS="$VHOOKSHFLAGS -L\$(BUILD_ROOT)/libswscale"
VHOOKLIBS="$VHOOKLIBS -lswscale\$(BUILDSUF)"
fi
- EXESUF=".exe"
SLIBPREF="cyg"
SLIBSUF=".dll"
SLIBNAME_WITH_VERSION='$(SLIBPREF)$(FULLNAME)-$(LIBVERSION)$(SLIBSUF)'
disable ffplay ffserver vhook
disable $INDEV_LIST $OUTDEV_LIST
network_extralibs="-lsocket"
- EXESUF=".exe"
objformat="coff"
enable dos_paths
;;
os/2*)
strip="lxlite"
ln_s="cp -f"
- EXESUF=".exe"
FFLDFLAGS="-Zomf -Zbin-files -Zargs-wild -Zmap"
SHFLAGS='$(SUBDIR)$(NAME).def -Zdll -Zomf'
FFSERVERLDFLAGS=""
;;
*)
- target_os="${target_os}-UNKNOWN"
+ die "Unknown OS '$target_os'."
;;
esac
#Darwin CC versions
if test $target_os = darwin; then
- if $cc -v 2>&1 | grep -q xlc; then
+ if enabled xlc; then
add_cflags -qpdf2 -qlanglvl=extc99 -qmaxmem=-1 -qarch=auto -qtune=auto
else
add_cflags -pipe
esac
fi
-# make sure we can execute files in $TMPDIR
-cat > $TMPSH 2>> $logfile <<EOF
-#! /bin/sh
-EOF
-chmod +x $TMPSH >> $logfile 2>&1
-if ! $TMPSH >> $logfile 2>&1; then
- cat <<EOF
-Unable to create and execute files in $TMPDIR. Set the TMPDIR environment
-variable to another directory and make sure that it is not mounted noexec.
-EOF
- die "Sanity test failed."
-fi
-rm $TMPSH
-
-# compiler sanity check
-check_exec <<EOF
-int main(void){ return 0; }
-EOF
-if test "$?" != 0; then
- echo "$cc is unable to create an executable file."
- if test -z "$cross_prefix" && ! enabled cross_compile ; then
- echo "If $cc is a cross-compiler, use the --enable-cross-compile option."
- echo "Only do this if you know what cross compiling means."
- fi
- die "C compiler test failed."
-fi
-
check_cc <<EOF || die "Symbol mangling check failed."
int ff_extern;
EOF
# check wether EBX is available on x86
check_asm ebx_available '"":::"%ebx"'
+ # check whether more than 10 operands are supported
+ check_cc <<EOF && enable ten_operands
+int main(void) {
+ int x=0;
+ __asm__ volatile(
+ ""
+ :"+&rm"(x), "+&rm"(x), "+&rm"(x), "+&rm"(x), "+&rm"(x), "+&rm"(x)
+ );
+ return 0;
+}
+EOF
+
# check whether binutils is new enough to compile SSSE3/MMX2
enabled ssse3 && check_asm ssse3 '"pabsw %xmm0, %xmm0"'
enabled mmx2 && check_asm mmx2 '"movss %xmm0, %xmm0"'
macho64) append YASMFLAGS "-DPIC -DPREFIX" ;;
*) append YASMFLAGS "-DPREFIX" ;;
esac
- check_yasm "pabsw xmm0, xmm0" && enable yasm
+ disabled yasm || { check_yasm "pabsw xmm0, xmm0" && enable yasm; }
fi
# check for assembler specific support
enabled libgsm && require libgsm gsm.h gsm_create -lgsm
enabled libmp3lame && require libmp3lame lame/lame.h lame_init -lmp3lame -lm
enabled libnut && require libnut libnut.h nut_demuxer_init -lnut
+enabled libopenjpeg && require libopenjpeg openjpeg.h opj_version -lopenjpeg
enabled libschroedinger && add_cflags $(pkg-config --cflags schroedinger-1.0) &&
require libschroedinger schroedinger/schro.h schro_init $(pkg-config --libs schroedinger-1.0)
enabled libspeex && require libspeex speex/speex.h speex_decoder_init -lspeex
check_header sys/soundcard.h
check_header soundcard.h
+check_header alsa/asoundlib.h &&
+check_lib2 alsa/asoundlib.h snd_pcm_htimestamp -lasound
+
# deal with the X11 frame grabber
enabled x11grab &&
check_header X11/Xlib.h &&
check_cflags -Os # not all compilers support -Os
optimizations="small"
elif enabled optimizations; then
- if $cc -v 2>&1 | grep -q xlc; then
+ if enabled xlc; then
add_cflags -O5
add_ldflags -O5
else
check_cflags -fno-signed-zeros
# add some flags for Intel C Compiler
-if $cc --version 2> /dev/null | grep -q Intel; then
- # Just warnings, no remarks
- check_cflags -w1
- # -wd: Disable following warnings
- # 144, 167, 556: -Wno-pointer-sign
- # 10006: ignoring unknown option -fno-signed-zeros
- # 10156: ignoring option '-W'; no argument required
- check_cflags -wd144,167,556,10006,10156
- # 11030: Warning unknown option --as-needed
- # 10156: ignoring option '-export'; no argument required
- check_ldflags -wd10156,11030
- # Allow to compile with optimizations
- check_ldflags -march=$cpu
+if enabled icc; then
+ # Just warnings, no remarks
+ check_cflags -w1
+ # -wd: Disable following warnings
+ # 144, 167, 556: -Wno-pointer-sign
+ # 10006: ignoring unknown option -fno-signed-zeros
+ # 10156: ignoring option '-W'; no argument required
+ check_cflags -wd144,167,556,10006,10156
+ # 11030: Warning unknown option --as-needed
+ # 10156: ignoring option '-export'; no argument required
+ check_ldflags -wd10156,11030
+ # Allow to compile with optimizations
+ check_ldflags -march=$cpu
fi
# PIC flags for shared library objects where they are needed
if enabled x86; then
echo "yasm ${yasm-no}"
echo "MMX enabled ${mmx-no}"
+ echo "MMX2 enabled ${mmx2-no}"
+ echo "3DNow! enabled ${amd3dnow-no}"
+ echo "3DNow! extended enabled ${amd3dnowext-no}"
echo "SSE enabled ${sse-no}"
+ echo "SSSE3 enabled ${ssse3-no}"
echo "CMOV enabled ${cmov-no}"
echo "CMOV is fast ${fast_cmov-no}"
echo "EBX available ${ebx_available-no}"
echo "EBP available ${ebp_available-no}"
+ echo "10 operands supported ${ten_operands-no}"
fi
if enabled arm; then
echo "ARMv5TE enabled ${armv5te-no}"
fi
if enabled ppc; then
echo "AltiVec enabled ${altivec-no}"
+ echo "PPC 4xx optimizations ${ppc4xx-no}"
echo "dcbzl available ${dcbzl-no}"
+ echo "performance report ${powerpc_perf-no}"
+fi
+if enabled sparc; then
+ echo "VIS enabled ${vis-no}"
fi
echo "gprof enabled ${gprof-no}"
echo "debug symbols ${debug-no}"
echo "libgsm enabled ${libgsm-no}"
echo "libmp3lame enabled ${libmp3lame-no}"
echo "libnut enabled ${libnut-no}"
+echo "libopenjpeg enabled ${libopenjpeg-no}"
echo "libschroedinger enabled ${libschroedinger-no}"
echo "libspeex enabled ${libspeex-no}"
echo "libtheora enabled ${libtheora-no}"
echo "#ifndef FFMPEG_CONFIG_H" >> $TMPH
echo "#define FFMPEG_CONFIG_H" >> $TMPH
echo "#define FFMPEG_CONFIGURATION \"$FFMPEG_CONFIGURATION\"" >> $TMPH
+echo "#define FFMPEG_DATADIR \"$(eval c_escape $datadir)\"" >> $TMPH
echo "FFMPEG_CONFIGURATION=$FFMPEG_CONFIGURATION" >> config.mak
echo "prefix=$prefix" >> config.mak
echo "SHLIBDIR=\$(DESTDIR)$shlibdir" >> config.mak
echo "INCDIR=\$(DESTDIR)$incdir" >> config.mak
echo "BINDIR=\$(DESTDIR)$bindir" >> config.mak
+echo "DATADIR=\$(DESTDIR)$datadir" >> config.mak
echo "MANDIR=\$(DESTDIR)$mandir" >> config.mak
echo "CC=$cc" >> config.mak
echo "YASM=$yasmexe" >> config.mak
projects / ffmpeg / blobdiff