fi
show_help(){
- echo "Usage: configure [options]"
- echo "Options: [defaults in brackets after descriptions]"
- echo
- echo "Standard options:"
- echo " --help print this message"
- echo " --logfile=FILE log tests and output to FILE [config.err]"
- echo " --disable-logging do not log configure debug information"
- echo " --prefix=PREFIX install in PREFIX [$prefix]"
- echo " --bindir=DIR install binaries in DIR [PREFIX/bin]"
- echo " --datadir=DIR install data files in DIR [PREFIX/share/ffmpeg]"
- echo " --libdir=DIR install libs in DIR [PREFIX/lib]"
- echo " --shlibdir=DIR install shared libs in DIR [PREFIX/lib]"
- echo " --incdir=DIR install includes in DIR [PREFIX/include]"
- echo " --mandir=DIR install man page in DIR [PREFIX/share/man]"
- echo
- echo "Configuration options:"
- echo " --disable-static do not build static libraries [no]"
- echo " --enable-shared build shared libraries [no]"
- echo " --enable-gpl allow use of GPL code, the resulting libs"
- echo " and binaries will be under GPL [no]"
- echo " --enable-version3 upgrade (L)GPL to version 3 [no]"
- echo " --enable-nonfree allow use of nonfree code, the resulting libs"
- echo " and binaries will be unredistributable [no]"
- echo " --disable-doc do not build documentation"
- echo " --disable-ffmpeg disable ffmpeg build"
- echo " --disable-ffplay disable ffplay build"
- echo " --disable-ffserver disable ffserver build"
- echo " --enable-postproc enable GPLed postprocessing support [no]"
- echo " --enable-avfilter video filter support [no]"
- echo " --enable-avfilter-lavf video filters dependent on avformat [no]"
- echo " --enable-beosthreads use BeOS threads [no]"
- echo " --enable-os2threads use OS/2 threads [no]"
- echo " --enable-pthreads use pthreads [no]"
- echo " --enable-w32threads use Win32 threads [no]"
- echo " --enable-x11grab enable X11 grabbing [no]"
- echo " --disable-network disable network support [no]"
- echo " --disable-ipv6 disable IPv6 support [no]"
- echo " --disable-mpegaudio-hp faster (but less accurate) MPEG audio decoding [no]"
- echo " --enable-gray enable full grayscale support (slower color)"
- echo " --disable-swscale-alpha disable alpha channel support in swscale"
- echo " --disable-fastdiv disable table-based division"
- echo " --enable-small optimize for size instead of speed"
- echo " --disable-aandct disable AAN DCT code"
- echo " --disable-fft disable FFT code"
- echo " --disable-golomb disable Golomb code"
- echo " --disable-lpc disable LPC code"
- echo " --disable-mdct disable MDCT code"
- echo " --disable-rdft disable RDFT code"
- echo " --disable-vaapi disable VAAPI code"
- echo " --disable-vdpau disable VDPAU code"
- echo " --enable-runtime-cpudetect detect cpu capabilities at runtime (bigger binary)"
- echo " --enable-hardcoded-tables use hardcoded tables instead of runtime generation"
- echo " --enable-memalign-hack emulate memalign, interferes with memory debuggers"
- echo " --enable-beos-netserver enable BeOS netserver"
- echo " --disable-encoder=NAME disable encoder NAME"
- echo " --enable-encoder=NAME enable encoder NAME"
- echo " --disable-encoders disable all encoders"
- echo " --disable-decoder=NAME disable decoder NAME"
- echo " --enable-decoder=NAME enable decoder NAME"
- echo " --disable-decoders disable all decoders"
- echo " --disable-hwaccel=NAME disable hwaccel NAME"
- echo " --enable-hwaccel=NAME enable hwaccel NAME"
- echo " --disable-hwaccels disable all hwaccels"
- echo " --disable-muxer=NAME disable muxer NAME"
- echo " --enable-muxer=NAME enable muxer NAME"
- echo " --disable-muxers disable all muxers"
- echo " --disable-demuxer=NAME disable demuxer NAME"
- echo " --enable-demuxer=NAME enable demuxer NAME"
- echo " --disable-demuxers disable all demuxers"
- echo " --enable-parser=NAME enable parser NAME"
- echo " --disable-parser=NAME disable parser NAME"
- echo " --disable-parsers disable all parsers"
- echo " --enable-bsf=NAME enable bitstream filter NAME"
- echo " --disable-bsf=NAME disable bitstream filter NAME"
- echo " --disable-bsfs disable all bitstream filters"
- echo " --enable-protocol=NAME enable protocol NAME"
- echo " --disable-protocol=NAME disable protocol NAME"
- echo " --disable-protocols disable all protocols"
- echo " --disable-indev=NAME disable input device NAME"
- echo " --disable-outdev=NAME disable output device NAME"
- echo " --disable-indevs disable input devices"
- echo " --disable-outdevs disable output devices"
- echo " --disable-devices disable all devices"
- echo " --enable-filter=NAME enable filter NAME"
- echo " --disable-filter=NAME disable filter NAME"
- echo " --disable-filters disable all filters"
- echo " --list-decoders show all available decoders"
- echo " --list-encoders show all available encoders"
- echo " --list-hwaccels show all available hardware accelerators"
- echo " --list-muxers show all available muxers"
- echo " --list-demuxers show all available demuxers"
- echo " --list-parsers show all available parsers"
- echo " --list-protocols show all available protocols"
- echo " --list-bsfs show all available bitstream filters"
- echo " --list-indevs show all available input devices"
- echo " --list-outdevs show all available output devices"
- echo " --list-filters show all available filters"
- echo
- echo "External library support:"
- echo " --enable-avisynth enable reading of AVISynth script files [no]"
- echo " --enable-bzlib enable bzlib [autodetect]"
- echo " --enable-libopencore-amrnb enable AMR-NB de/encoding via libopencore-amrnb [no]"
- echo " --enable-libopencore-amrwb enable AMR-WB decoding via libopencore-amrwb [no]"
- echo " --enable-libdc1394 enable IIDC-1394 grabbing using libdc1394"
- echo " and libraw1394 [no]"
- echo " --enable-libdirac enable Dirac support via libdirac [no]"
- echo " --enable-libfaac enable FAAC support via libfaac [no]"
- echo " --enable-libfaad enable FAAD support via libfaad [no]"
- echo " --enable-libfaadbin open libfaad.so.0 at runtime [no]"
- echo " --enable-libgsm enable GSM support via libgsm [no]"
- echo " --enable-libmp3lame enable MP3 encoding via libmp3lame [no]"
- echo " --enable-libnut enable NUT (de)muxing via libnut,"
- echo " native (de)muxer exists [no]"
- echo " --enable-libopenjpeg enable JPEG 2000 decoding via OpenJPEG [no]"
- echo " --enable-libschroedinger enable Dirac support via libschroedinger [no]"
- echo " --enable-libspeex enable Speex decoding via libspeex [no]"
- echo " --enable-libtheora enable Theora encoding via libtheora [no]"
- echo " --enable-libvorbis enable Vorbis encoding via libvorbis,"
- echo " native implementation exists [no]"
- echo " --enable-libx264 enable H.264 encoding via x264 [no]"
- echo " --enable-libxvid enable Xvid encoding via xvidcore,"
- echo " native MPEG-4/Xvid encoder exists [no]"
- echo " --enable-mlib enable Sun medialib [no]"
- echo " --enable-zlib enable zlib [autodetect]"
- echo ""
- echo "Advanced options (experts only):"
- echo " --source-path=PATH path to source code [$source_path]"
- echo " --cross-prefix=PREFIX use PREFIX for compilation tools [$cross_prefix]"
- echo " --enable-cross-compile assume a cross-compiler is used"
- echo " --sysroot=PATH root of cross-build tree"
- echo " --sysinclude=PATH location of cross-build system headers"
- echo " --target-os=OS compiler targets OS [$target_os]"
- echo " --target-exec=CMD command to run executables on target"
- echo " --target-path=DIR path to view of build directory on target"
- echo " --nm=NM use nm tool"
- echo " --as=AS use assembler AS [$as_default]"
- echo " --cc=CC use C compiler CC [$cc_default]"
- echo " --ld=LD use linker LD"
- echo " --host-cc=HOSTCC use host C compiler HOSTCC"
- echo " --host-cflags=HCFLAGS use HCFLAGS when compiling for host"
- echo " --host-ldflags=HLDFLAGS use HLDFLAGS when linking for host"
- echo " --host-libs=HLIBS use libs HLIBS when linking for host"
- echo " --extra-cflags=ECFLAGS add ECFLAGS to CFLAGS [$CFLAGS]"
- echo " --extra-ldflags=ELDFLAGS add ELDFLAGS to LDFLAGS [$LDFLAGS]"
- echo " --extra-libs=ELIBS add ELIBS [$ELIBS]"
- echo " --extra-version=STRING version string suffix []"
- echo " --build-suffix=SUFFIX library name suffix []"
- echo " --arch=ARCH select architecture [$arch]"
- echo " --cpu=CPU select the minimum required CPU (affects"
- echo " instruction selection, may crash on older CPUs)"
- echo " --enable-powerpc-perf enable performance report on PPC"
- echo " (requires enabling PMC)"
- echo " --disable-altivec disable AltiVec optimizations"
- echo " --disable-amd3dnow disable 3DNow! optimizations"
- echo " --disable-amd3dnowext disable 3DNow! extended optimizations"
- echo " --disable-mmx disable MMX optimizations"
- echo " --disable-mmx2 disable MMX2 optimizations"
- echo " --disable-sse disable SSE optimizations"
- echo " --disable-ssse3 disable SSSE3 optimizations"
- echo " --disable-armv5te disable armv5te optimizations"
- echo " --disable-armv6 disable armv6 optimizations"
- echo " --disable-armv6t2 disable armv6t2 optimizations"
- echo " --disable-armvfp disable ARM VFP optimizations"
- echo " --disable-iwmmxt disable iwmmxt optimizations"
- echo " --disable-mmi disable MMI optimizations"
- echo " --disable-neon disable neon optimizations"
- echo " --disable-vis disable VIS optimizations"
- echo " --disable-yasm disable use of yasm assembler"
- echo " --enable-pic build position-independent code"
- echo
- echo "Developer options (useful when working on FFmpeg itself):"
- echo " --disable-debug disable debugging symbols"
- echo " --enable-debug=LEVEL set the debug level [$debuglevel]"
- echo " --enable-gprof enable profiling with gprof [$gprof]"
- echo " --disable-optimizations disable compiler optimizations"
- echo " --enable-extra-warnings enable more compiler warnings"
- echo " --disable-stripping disable stripping of executables and shared libraries"
- echo ""
- echo "NOTE: Object files are built at the place where configure is launched."
+cat <<EOF
+Usage: configure [options]
+Options: [defaults in brackets after descriptions]
+
+Standard options:
+ --help print this message
+ --logfile=FILE log tests and output to FILE [config.err]
+ --disable-logging do not log configure debug information
+ --prefix=PREFIX install in PREFIX [$prefix]
+ --bindir=DIR install binaries in DIR [PREFIX/bin]
+ --datadir=DIR install data files in DIR [PREFIX/share/ffmpeg]
+ --libdir=DIR install libs in DIR [PREFIX/lib]
+ --shlibdir=DIR install shared libs in DIR [PREFIX/lib]
+ --incdir=DIR install includes in DIR [PREFIX/include]
+ --mandir=DIR install man page in DIR [PREFIX/share/man]
+
+Configuration options:
+ --disable-static do not build static libraries [no]
+ --enable-shared build shared libraries [no]
+ --enable-gpl allow use of GPL code, the resulting libs
+ and binaries will be under GPL [no]
+ --enable-version3 upgrade (L)GPL to version 3 [no]
+ --enable-nonfree allow use of nonfree code, the resulting libs
+ and binaries will be unredistributable [no]
+ --disable-doc do not build documentation
+ --disable-ffmpeg disable ffmpeg build
+ --disable-ffplay disable ffplay build
+ --disable-ffserver disable ffserver build
+ --enable-postproc enable GPLed postprocessing support [no]
+ --enable-avfilter video filter support [no]
+ --enable-avfilter-lavf video filters dependent on avformat [no]
+ --enable-beosthreads use BeOS threads [no]
+ --enable-os2threads use OS/2 threads [no]
+ --enable-pthreads use pthreads [no]
+ --enable-w32threads use Win32 threads [no]
+ --enable-x11grab enable X11 grabbing [no]
+ --disable-network disable network support [no]
+ --disable-ipv6 disable IPv6 support [no]
+ --disable-mpegaudio-hp faster (but less accurate) MPEG audio decoding [no]
+ --enable-gray enable full grayscale support (slower color)
+ --disable-swscale-alpha disable alpha channel support in swscale
+ --disable-fastdiv disable table-based division
+ --enable-small optimize for size instead of speed
+ --disable-aandct disable AAN DCT code
+ --disable-fft disable FFT code
+ --disable-golomb disable Golomb code
+ --disable-lpc disable LPC code
+ --disable-mdct disable MDCT code
+ --disable-rdft disable RDFT code
+ --disable-vaapi disable VAAPI code
+ --disable-vdpau disable VDPAU code
+ --enable-runtime-cpudetect detect cpu capabilities at runtime (bigger binary)
+ --enable-hardcoded-tables use hardcoded tables instead of runtime generation
+ --enable-memalign-hack emulate memalign, interferes with memory debuggers
+ --enable-beos-netserver enable BeOS netserver
+ --disable-encoder=NAME disable encoder NAME
+ --enable-encoder=NAME enable encoder NAME
+ --disable-encoders disable all encoders
+ --disable-decoder=NAME disable decoder NAME
+ --enable-decoder=NAME enable decoder NAME
+ --disable-decoders disable all decoders
+ --disable-hwaccel=NAME disable hwaccel NAME
+ --enable-hwaccel=NAME enable hwaccel NAME
+ --disable-hwaccels disable all hwaccels
+ --disable-muxer=NAME disable muxer NAME
+ --enable-muxer=NAME enable muxer NAME
+ --disable-muxers disable all muxers
+ --disable-demuxer=NAME disable demuxer NAME
+ --enable-demuxer=NAME enable demuxer NAME
+ --disable-demuxers disable all demuxers
+ --enable-parser=NAME enable parser NAME
+ --disable-parser=NAME disable parser NAME
+ --disable-parsers disable all parsers
+ --enable-bsf=NAME enable bitstream filter NAME
+ --disable-bsf=NAME disable bitstream filter NAME
+ --disable-bsfs disable all bitstream filters
+ --enable-protocol=NAME enable protocol NAME
+ --disable-protocol=NAME disable protocol NAME
+ --disable-protocols disable all protocols
+ --disable-indev=NAME disable input device NAME
+ --disable-outdev=NAME disable output device NAME
+ --disable-indevs disable input devices
+ --disable-outdevs disable output devices
+ --disable-devices disable all devices
+ --enable-filter=NAME enable filter NAME
+ --disable-filter=NAME disable filter NAME
+ --disable-filters disable all filters
+ --list-decoders show all available decoders
+ --list-encoders show all available encoders
+ --list-hwaccels show all available hardware accelerators
+ --list-muxers show all available muxers
+ --list-demuxers show all available demuxers
+ --list-parsers show all available parsers
+ --list-protocols show all available protocols
+ --list-bsfs show all available bitstream filters
+ --list-indevs show all available input devices
+ --list-outdevs show all available output devices
+ --list-filters show all available filters
+
+External library support:
+ --enable-avisynth enable reading of AVISynth script files [no]
+ --enable-bzlib enable bzlib [autodetect]
+ --enable-libopencore-amrnb enable AMR-NB de/encoding via libopencore-amrnb [no]
+ --enable-libopencore-amrwb enable AMR-WB decoding via libopencore-amrwb [no]
+ --enable-libdc1394 enable IIDC-1394 grabbing using libdc1394
+ and libraw1394 [no]
+ --enable-libdirac enable Dirac support via libdirac [no]
+ --enable-libfaac enable FAAC support via libfaac [no]
+ --enable-libfaad enable FAAD support via libfaad [no]
+ --enable-libfaadbin open libfaad.so.0 at runtime [no]
+ --enable-libgsm enable GSM support via libgsm [no]
+ --enable-libmp3lame enable MP3 encoding via libmp3lame [no]
+ --enable-libnut enable NUT (de)muxing via libnut,
+ native (de)muxer exists [no]
+ --enable-libopenjpeg enable JPEG 2000 decoding via OpenJPEG [no]
+ --enable-libschroedinger enable Dirac support via libschroedinger [no]
+ --enable-libspeex enable Speex decoding via libspeex [no]
+ --enable-libtheora enable Theora encoding via libtheora [no]
+ --enable-libvorbis enable Vorbis encoding via libvorbis,
+ native implementation exists [no]
+ --enable-libx264 enable H.264 encoding via x264 [no]
+ --enable-libxvid enable Xvid encoding via xvidcore,
+ native MPEG-4/Xvid encoder exists [no]
+ --enable-mlib enable Sun medialib [no]
+ --enable-zlib enable zlib [autodetect]
+
+Advanced options (experts only):
+ --source-path=PATH path to source code [$source_path]
+ --cross-prefix=PREFIX use PREFIX for compilation tools [$cross_prefix]
+ --enable-cross-compile assume a cross-compiler is used
+ --sysroot=PATH root of cross-build tree
+ --sysinclude=PATH location of cross-build system headers
+ --target-os=OS compiler targets OS [$target_os]
+ --target-exec=CMD command to run executables on target
+ --target-path=DIR path to view of build directory on target
+ --nm=NM use nm tool
+ --as=AS use assembler AS [$as_default]
+ --cc=CC use C compiler CC [$cc_default]
+ --ld=LD use linker LD
+ --host-cc=HOSTCC use host C compiler HOSTCC
+ --host-cflags=HCFLAGS use HCFLAGS when compiling for host
+ --host-ldflags=HLDFLAGS use HLDFLAGS when linking for host
+ --host-libs=HLIBS use libs HLIBS when linking for host
+ --extra-cflags=ECFLAGS add ECFLAGS to CFLAGS [$CFLAGS]
+ --extra-ldflags=ELDFLAGS add ELDFLAGS to LDFLAGS [$LDFLAGS]
+ --extra-libs=ELIBS add ELIBS [$ELIBS]
+ --extra-version=STRING version string suffix []
+ --build-suffix=SUFFIX library name suffix []
+ --arch=ARCH select architecture [$arch]
+ --cpu=CPU select the minimum required CPU (affects
+ instruction selection, may crash on older CPUs)
+ --enable-powerpc-perf enable performance report on PPC
+ (requires enabling PMC)
+ --disable-altivec disable AltiVec optimizations
+ --disable-amd3dnow disable 3DNow! optimizations
+ --disable-amd3dnowext disable 3DNow! extended optimizations
+ --disable-mmx disable MMX optimizations
+ --disable-mmx2 disable MMX2 optimizations
+ --disable-sse disable SSE optimizations
+ --disable-ssse3 disable SSSE3 optimizations
+ --disable-armv5te disable armv5te optimizations
+ --disable-armv6 disable armv6 optimizations
+ --disable-armv6t2 disable armv6t2 optimizations
+ --disable-armvfp disable ARM VFP optimizations
+ --disable-iwmmxt disable iwmmxt optimizations
+ --disable-mmi disable MMI optimizations
+ --disable-neon disable neon optimizations
+ --disable-vis disable VIS optimizations
+ --disable-yasm disable use of yasm assembler
+ --enable-pic build position-independent code
+
+Developer options (useful when working on FFmpeg itself):
+ --disable-debug disable debugging symbols
+ --enable-debug=LEVEL set the debug level [$debuglevel]
+ --enable-gprof enable profiling with gprof [$gprof]
+ --disable-optimizations disable compiler optimizations
+ --enable-extra-warnings enable more compiler warnings
+ --disable-stripping disable stripping of executables and shared libraries
+
+NOTE: Object files are built at the place where configure is launched.
+EOF
exit 0
}
}
enable_safe(){
- enable $(echo "$*" | sed 's/[^A-Za-z0-9_ ]/_/g')
+ for var; do
+ enable $(echo "$var" | sed 's/[^A-Za-z0-9_]/_/g')
+ done
}
disable_safe(){
- disable $(echo "$*" | sed 's/[^A-Za-z0-9_ ]/_/g')
+ for var; do
+ disable $(echo "$var" | sed 's/[^A-Za-z0-9_]/_/g')
+ done
}
do_enable_deep(){
headers=$1
type=$2
shift 2
- disable $type
+ disable_safe "$type"
incs=""
for hdr in $headers; do
incs="$incs
#include <$hdr>"
done
- check_cc "$@" <<EOF && enable $type
+ check_cc "$@" <<EOF && enable_safe "$type"
$incs
$type v;
EOF
dos_paths
ebp_available
ebx_available
+ exp2
+ exp2f
fast_64bit
fast_cmov
fast_unaligned
fork
+ getaddrinfo
gethrtime
GetProcessTimes
getrusage
libdc1394_2
llrint
log2
+ log2f
loongson
lrint
lrintf
socklen_t
soundcard_h
poll_h
+ struct_addrinfo
+ struct_sockaddr_storage
sys_mman_h
sys_resource_h
sys_select_h
inline_asm_deps="!tms470"
# decoders / encoders / hardware accelerators
-aac_decoder_select="fft mdct"
+aac_decoder_select="fft mdct aac_parser"
aac_encoder_select="fft mdct"
-ac3_decoder_select="fft mdct"
+ac3_decoder_select="fft mdct ac3_parser"
alac_encoder_select="lpc"
atrac3_decoder_select="fft mdct"
cavs_decoder_select="golomb"
flac_encoder_select="golomb lpc"
flashsv_decoder_select="zlib"
flashsv_encoder_select="zlib"
+flv_decoder_select="h263_decoder"
flv_encoder_select="h263_encoder"
h261_encoder_select="aandct"
+h263_decoder_select="h263_parser"
h263_encoder_select="aandct"
h263_vaapi_hwaccel_deps="va_va_h"
h263_vaapi_hwaccel_select="vaapi h263_decoder"
+h263i_decoder_select="h263_decoder"
h263p_encoder_select="h263_encoder"
h264_decoder_select="golomb"
h264_vaapi_hwaccel_deps="va_va_h"
ljpeg_encoder_select="aandct"
loco_decoder_select="golomb"
mjpeg_encoder_select="aandct"
+mlp_decoder_select="mlp_parser"
mpeg1video_encoder_select="aandct"
mpeg2video_encoder_select="aandct"
+mpeg4_decoder_select="h263_decoder mpeg4video_parser"
mpeg4_encoder_select="h263_encoder"
mpeg_vdpau_decoder_deps="vdpau_vdpau_h vdpau_vdpau_x11_h"
mpeg_vdpau_decoder_select="vdpau mpegvideo_decoder"
mpeg2_vaapi_hwaccel_select="vaapi mpeg2video_decoder"
mpeg4_vaapi_hwaccel_deps="va_va_h"
mpeg4_vaapi_hwaccel_select="vaapi mpeg4_decoder"
+mpeg4_vdpau_decoder_deps="vdpau_vdpau_h vdpau_vdpau_x11_h"
+mpeg4_vdpau_decoder_select="vdpau mpeg4_decoder"
mpeg_xvmc_decoder_deps="X11_extensions_XvMClib_h"
mpeg_xvmc_decoder_select="mpegvideo_decoder"
+msmpeg4v1_decoder_select="h263_decoder"
msmpeg4v1_encoder_select="h263_encoder"
+msmpeg4v2_decoder_select="h263_decoder"
msmpeg4v2_encoder_select="h263_encoder"
+msmpeg4v3_decoder_select="h263_decoder"
msmpeg4v3_encoder_select="h263_encoder"
nellymoser_decoder_select="fft mdct"
nellymoser_encoder_select="fft mdct"
png_decoder_select="zlib"
png_encoder_select="zlib"
qdm2_decoder_select="fft mdct rdft"
+rv10_decoder_select="h263_decoder"
rv10_encoder_select="h263_encoder"
+rv20_decoder_select="h263_decoder"
rv20_encoder_select="h263_encoder"
rv30_decoder_select="golomb"
rv40_decoder_select="golomb"
theora_decoder_select="vp3_decoder"
tiff_decoder_suggest="zlib"
tiff_encoder_suggest="zlib"
+truehd_decoder_select="mlp_decoder"
tscc_decoder_select="zlib"
+vc1_decoder_select="h263_decoder"
vc1_vaapi_hwaccel_deps="va_va_h"
vc1_vaapi_hwaccel_select="vaapi vc1_decoder"
vc1_vdpau_decoder_deps="vdpau_vdpau_h vdpau_vdpau_x11_h"
wmav1_encoder_select="fft mdct"
wmav2_decoder_select="fft mdct"
wmav2_encoder_select="fft mdct"
+wmv1_decoder_select="h263_decoder"
wmv1_encoder_select="h263_encoder"
+wmv2_decoder_select="h263_decoder"
wmv2_encoder_select="h263_encoder"
wmv3_decoder_select="vc1_decoder"
wmv3_vaapi_hwaccel_select="vc1_vaapi_hwaccel"
# parsers
h264_parser_select="golomb"
+# bitstream_filters
+aac_adtstoasc_bsf_select="aac_parser"
+
# external libraries
libdirac_decoder_deps="libdirac !libschroedinger"
libdirac_encoder_deps="libdirac"
asf_stream_muxer_select="asf_muxer"
avisynth_demuxer_deps="avisynth"
dirac_demuxer_deps="dirac_parser"
+eac3_demuxer_select="ac3_parser"
ipod_muxer_select="mov_muxer"
libnut_demuxer_deps="libnut"
libnut_muxer_deps="libnut"
mp4_muxer_select="mov_muxer"
mpegtsraw_demuxer_select="mpegts_demuxer"
mxf_d10_muxer_select="mxf_muxer"
+ogg_demuxer_select="golomb"
psp_muxer_select="mov_muxer"
rtp_muxer_deps="network rtp_protocol"
rtsp_demuxer_deps="sdp_demuxer"
sdp_demuxer_deps="rtp_protocol mpegts_demuxer"
+spdif_muxer_select="aac_parser"
tg2_muxer_select="mov_muxer"
tgp_muxer_select="mov_muxer"
w64_demuxer_deps="wav_demuxer"
vfwcap_indev_deps="capCreateCaptureWindow"
vfwcap_indev_extralibs="-lvfw32"
x11_grab_device_indev_deps="x11grab XShmCreateImage"
-x11_grab_device_indev_extralibs="-lX11 -lXext"
+x11_grab_device_indev_extralibs="-lX11 -lXext -lXfixes"
# protocols
gopher_protocol_deps="network"
elif $cc -V 2>&1 | grep -q Sun; then
cc_type=suncc
cc_version="AV_STRINGIFY(__SUNPRO_C)"
- DEPEND_CMD='$(DEPCC) $(DEPFLAGS) $< | sed -e "1s,^.*: ,$@: ," -e "\$$!s,\$$, \\\\\\," -e "1!s,^.*: , ," > $(@:.o=.d)'
+ DEPEND_CMD='$(DEPCC) $(DEPFLAGS) $< | sed -e "1s,^.*: ,$@: ," -e "\$$!s,\$$, \\\," -e "1!s,^.*: , ," > $(@:.o=.d)'
DEPFLAGS='$(CPPFLAGS) $(CFLAGS) -xM1'
+ filter_cflags=suncc_flags
+ suncc_flags(){
+ for flag; do
+ case $flag in
+ -march=*|-mcpu=*)
+ case "${flag#*=}" in
+ native) echo -xtarget=native ;;
+ v9) echo -xarch=sparc ;;
+ ultrasparc) echo -xarch=sparcvis ;;
+ ultrasparc3|niagara*) echo -xarch=sparcvis2 ;;
+ i586|pentium) echo -xchip=pentium ;;
+ i686|pentiumpro|pentium2) echo -xtarget=pentium_pro ;;
+ pentium3*|c3-2) echo -xtarget=pentium3 ;;
+ pentium-m) echo -xarch=sse2 -xchip=pentium3 ;;
+ pentium4*) echo -xtarget=pentium4 ;;
+ prescott|nocona) echo -xarch=sse3 -xchip=pentium4 ;;
+ *-sse3) echo -xarch=sse3 ;;
+ core2) echo -xarch=ssse3 -xchip=core2 ;;
+ amdfam10|barcelona) echo -xarch=sse4_1 ;;
+ athlon-4|athlon-[mx]p) echo -xarch=ssea ;;
+ k8|opteron|athlon64|athlon-fx)
+ echo -xarch=sse2a ;;
+ athlon*) echo -xarch=pentium_proa ;;
+ esac
+ ;;
+ -std=c99) echo -xc99 ;;
+ -fomit-frame-pointer) echo -xregs=frameptr ;;
+ -fPIC) echo -KPIC -xcode=pic32 ;;
+ -Os) echo -O5 -xspace ;;
+ -W*,*) echo $flag ;;
+ -f*-*|-W*) ;;
+ *) echo $flag ;;
+ esac
+ done
+ }
fi
test -n "$cc_type" && enable $cc_type || echolog "Unknown C compiler $cc"
enable fast_64bit
spic=$shared
# HACK: currently fails to build if .bss is > 4MB and shared libs are built
- enabled shared && enable hardcoded_tables
+ enabled shared && enable_weak hardcoded_tables
;;
m68k)
arch="m68k"
subarch="x86_32"
enable fast_unaligned
check_cc <<EOF && enable fast_64bit && subarch="x86_64" && spic=$shared
- int test[sizeof(char*) - 7];
+ int test[(int)sizeof(char*) - 7];
EOF
if test "$subarch" = "x86_64"; then
enable cmov
enable $arch $subarch
enabled spic && enable pic
+check_cpp_condition stdlib.h "defined(__PIC__) || defined(__pic__) || defined(PIC)" && enable pic
# OS specific
case $target_os in
beos|haiku|zeta)
prefix_default="$HOME/config"
- # helps building libavcodec
- add_cppflags -DPIC
- add_cflags -fomit-frame-pointer
# 3 gcc releases known for BeOS, each with ugly bugs
gcc_version="$($cc -v 2>&1 | grep version | cut -d ' ' -f3-)"
case "$gcc_version" in
;;
openbsd)
enable malloc_aligned
+ # On OpenBSD 4.5. the compiler does not use PIC unless
+ # explicitly using -fPIC. FFmpeg builds fine without PIC,
+ # however the generated executable will not do anything
+ # (simply quits with exit-code 1, no crash, no output).
+ # Thus explicitly enable PIC here.
enable pic
SHFLAGS='-shared'
oss_indev_extralibs="-lossaudio"
check_asm dcbzl '"dcbzl 0, 1"'
check_asm ppc4xx '"maclhw r10, r11, r12"'
- check_asm xform_asm '"lwzx 0, %y0" :: "Z"(*(int*)0)'
+ check_asm xform_asm '"lwzx %1, %y0" :: "Z"(*(int*)0), "r"(0)'
# AltiVec flags: The FSF version of GCC differs from the Apple version
if enabled altivec; then
YASMFLAGS="-f $objformat -DARCH_$(toupper $subarch)"
enabled x86_64 && append YASMFLAGS "-m amd64"
- enabled_all x86_64 shared && append YASMFLAGS "-DPIC"
+ enabled pic && append YASMFLAGS "-DPIC"
+ test -n "$extern_prefix" && append YASMFLAGS "-DPREFIX"
case "$objformat" in
elf) enabled debug && append YASMFLAGS "-g dwarf2" ;;
- macho64) append YASMFLAGS "-DPIC -DPREFIX" ;;
- *) append YASMFLAGS "-DPREFIX" ;;
esac
disabled yasm || { check_yasm "pabsw xmm0, xmm0" && enable yasm; }
check_func nanosleep || { check_func nanosleep -lrt && add_extralibs -lrt; }
check_func fork
+check_func getaddrinfo $network_extralibs
check_func gethrtime
check_func getrusage
check_func inet_aton $network_extralibs
check_lib math.h sin -lm
check_lib va/va.h vaInitialize -lva
+check_func exp2
+check_func exp2f
check_func llrint
check_func log2
+check_func log2f
check_func lrint
check_func lrintf
check_func round
enabled libschroedinger && add_cflags $(pkg-config --cflags schroedinger-1.0) &&
require libschroedinger schroedinger/schro.h schro_init $(pkg-config --libs schroedinger-1.0)
enabled libspeex && require libspeex speex/speex.h speex_decoder_init -lspeex
-enabled libtheora && require libtheora theora/theora.h theora_info_init -ltheora -logg
+enabled libtheora && require libtheora theora/theoraenc.h th_info_init -ltheoraenc -ltheoradec -logg
enabled libvorbis && require libvorbis vorbis/vorbisenc.h vorbis_info_init -lvorbisenc -lvorbis -logg
enabled libx264 && require libx264 x264.h x264_encoder_encode -lx264 -lm &&
- { check_cpp_condition x264.h "X264_BUILD >= 78" ||
- die "ERROR: libx264 version must be >= 0.78."; }
+ { check_cpp_condition x264.h "X264_BUILD >= 79" ||
+ die "ERROR: libx264 version must be >= 0.79."; }
enabled libxvid && require libxvid xvid.h xvid_global -lxvidcore
enabled mlib && require mediaLib mlib_types.h mlib_VectorSub_S16_U8_Mod -lmlib
if enabled network; then
check_type "sys/types.h sys/socket.h" socklen_t
+ check_type netdb.h "struct addrinfo"
+ check_type sys/socket.h "struct sockaddr_storage"
# Prefer arpa/inet.h over winsock2
if check_header arpa/inet.h ; then
check_func closesocket
{ check_func_headers winsock2.h closesocket -lws2_32 && \
network_extralibs="-lws2_32"; }
check_type ws2tcpip.h socklen_t
+ check_type ws2tcpip.h "struct addrinfo"
+ check_type ws2tcpip.h "struct sockaddr_storage"
else
disable network
fi
enabled x11grab &&
check_header X11/Xlib.h &&
check_header X11/extensions/XShm.h &&
+check_header X11/extensions/Xfixes.h &&
check_func XOpenDisplay -lX11 &&
-check_func XShmCreateImage -lX11 -lXext
+check_func XShmCreateImage -lX11 -lXext &&
+check_func XFixesGetCursorImage -lX11 -lXext -lXfixes
+
+if enabled vdpau_vdpau_h; then
+check_cpp_condition \
+ vdpau/vdpau.h "defined VDP_DECODER_PROFILE_MPEG4_PART2_ASP" ||
+ { echolog "Please upgrade to libvdpau >= 0.2 if you would like vdpau support." &&
+ disable vdpau; }
+fi
enabled debug && add_cflags -g"$debuglevel" && add_asflags -g"$debuglevel"
if enabled xlc; then
add_cflags -O5
add_ldflags -O5
+ elif enabled suncc; then
+ add_cflags -O5
elif enabled ccc; then
add_cflags -fast
else
enabled stripping || strip="echo skipping strip"
-echo "# Automatically generated by configure - do not modify!" > config.mak
-echo "ifndef FFMPEG_CONFIG_MAK" >> config.mak
-echo "FFMPEG_CONFIG_MAK=1" >> config.mak
-
-echo "FFMPEG_CONFIGURATION=$FFMPEG_CONFIGURATION" >> config.mak
-echo "prefix=$prefix" >> config.mak
-echo "LIBDIR=\$(DESTDIR)$libdir" >> config.mak
-echo "SHLIBDIR=\$(DESTDIR)$shlibdir" >> config.mak
-echo "INCDIR=\$(DESTDIR)$incdir" >> config.mak
-echo "BINDIR=\$(DESTDIR)$bindir" >> config.mak
-echo "DATADIR=\$(DESTDIR)$datadir" >> config.mak
-echo "MANDIR=\$(DESTDIR)$mandir" >> config.mak
-echo "SRC_PATH=\"$source_path\"" >> config.mak
-echo "SRC_PATH_BARE=$source_path" >> config.mak
-echo "BUILD_ROOT=\"$PWD\"" >> config.mak
-echo "CC=$cc" >> config.mak
-echo "AS=$as" >> config.mak
-echo "LD=$ld" >> config.mak
-echo "DEPCC=$dep_cc" >> config.mak
-echo "YASM=$yasmexe" >> config.mak
-echo "AR=$ar" >> config.mak
-echo "RANLIB=$ranlib" >> config.mak
-echo "LN_S=$ln_s" >> config.mak
-echo "STRIP=$strip" >> config.mak
-echo "CPPFLAGS=$CPPFLAGS" >> config.mak
-echo "CFLAGS=$CFLAGS" >> config.mak
-echo "ASFLAGS=$ASFLAGS" >> config.mak
-echo "CC_O=$CC_O" >> config.mak
-echo "LDFLAGS=$LDFLAGS" >> config.mak
-echo "FFSERVERLDFLAGS=$FFSERVERLDFLAGS" >> config.mak
-echo "SHFLAGS=$SHFLAGS" >> config.mak
-echo "YASMFLAGS=$YASMFLAGS" >> config.mak
-echo "BUILDSUF=$build_suffix" >> config.mak
-echo "FULLNAME=$FULLNAME" >> config.mak
-echo "LIBPREF=$LIBPREF" >> config.mak
-echo "LIBSUF=$LIBSUF" >> config.mak
-echo "LIBNAME=$LIBNAME" >> config.mak
-echo "SLIBPREF=$SLIBPREF" >> config.mak
-echo "SLIBSUF=$SLIBSUF" >> config.mak
-echo "EXESUF=$EXESUF" >> config.mak
-echo "EXTRA_VERSION=$extra_version" >> config.mak
-echo "DEPFLAGS=$DEPFLAGS" >> config.mak
-echo "CCDEP=$CCDEP" >> config.mak
-echo "ASDEP=$ASDEP" >> config.mak
-echo "CC_DEPFLAGS=$CC_DEPFLAGS" >> config.mak
-echo "AS_DEPFLAGS=$AS_DEPFLAGS" >> config.mak
-echo "HOSTCC=$host_cc" >> config.mak
-echo "HOSTCFLAGS=$host_cflags" >> config.mak
-echo "HOSTEXESUF=$HOSTEXESUF" >> config.mak
-echo "HOSTLDFLAGS=$host_ldflags" >> config.mak
-echo "HOSTLIBS=$host_libs" >> config.mak
-echo "TARGET_EXEC=$target_exec" >> config.mak
-echo "TARGET_PATH=$target_path" >> config.mak
-echo "SDL_LIBS=$sdl_libs" >> config.mak
-echo "SDL_CFLAGS=$sdl_cflags" >> config.mak
+cat > config.mak <<EOF
+# Automatically generated by configure - do not modify!
+ifndef FFMPEG_CONFIG_MAK
+FFMPEG_CONFIG_MAK=1
+FFMPEG_CONFIGURATION=$FFMPEG_CONFIGURATION
+prefix=$prefix
+LIBDIR=\$(DESTDIR)$libdir
+SHLIBDIR=\$(DESTDIR)$shlibdir
+INCDIR=\$(DESTDIR)$incdir
+BINDIR=\$(DESTDIR)$bindir
+DATADIR=\$(DESTDIR)$datadir
+MANDIR=\$(DESTDIR)$mandir
+SRC_PATH="$source_path"
+SRC_PATH_BARE=$source_path
+BUILD_ROOT="$PWD"
+ARCH=$arch
+CC=$cc
+AS=$as
+LD=$ld
+DEPCC=$dep_cc
+YASM=$yasmexe
+AR=$ar
+RANLIB=$ranlib
+LN_S=$ln_s
+STRIP=$strip
+CPPFLAGS=$CPPFLAGS
+CFLAGS=$CFLAGS
+ASFLAGS=$ASFLAGS
+CC_O=$CC_O
+LDFLAGS=$LDFLAGS
+FFSERVERLDFLAGS=$FFSERVERLDFLAGS
+SHFLAGS=$SHFLAGS
+YASMFLAGS=$YASMFLAGS
+BUILDSUF=$build_suffix
+FULLNAME=$FULLNAME
+LIBPREF=$LIBPREF
+LIBSUF=$LIBSUF
+LIBNAME=$LIBNAME
+SLIBPREF=$SLIBPREF
+SLIBSUF=$SLIBSUF
+EXESUF=$EXESUF
+EXTRA_VERSION=$extra_version
+DEPFLAGS=$DEPFLAGS
+CCDEP=$CCDEP
+ASDEP=$ASDEP
+CC_DEPFLAGS=$CC_DEPFLAGS
+AS_DEPFLAGS=$AS_DEPFLAGS
+HOSTCC=$host_cc
+HOSTCFLAGS=$host_cflags
+HOSTEXESUF=$HOSTEXESUF
+HOSTLDFLAGS=$host_ldflags
+HOSTLIBS=$host_libs
+TARGET_EXEC=$target_exec
+TARGET_PATH=$target_path
+SDL_LIBS=$sdl_libs
+SDL_CFLAGS=$sdl_cflags
+LIB_INSTALL_EXTRA_CMD=$LIB_INSTALL_EXTRA_CMD
+EXTRALIBS=$extralibs
+EOF
get_version(){
name=$1
get_version LIBAVUTIL libavutil/avutil.h
get_version LIBAVFILTER libavfilter/avfilter.h
-if enabled shared; then
- echo "LIBTARGET=${LIBTARGET}" >> config.mak
- echo "SLIBNAME=${SLIBNAME}" >> config.mak
- echo "SLIBNAME_WITH_VERSION=${SLIBNAME_WITH_VERSION}" >> config.mak
- echo "SLIBNAME_WITH_MAJOR=${SLIBNAME_WITH_MAJOR}" >> config.mak
- echo "SLIB_CREATE_DEF_CMD=${SLIB_CREATE_DEF_CMD}" >> config.mak
- echo "SLIB_EXTRA_CMD=${SLIB_EXTRA_CMD}" >> config.mak
- echo "SLIB_INSTALL_EXTRA_CMD=${SLIB_INSTALL_EXTRA_CMD}" >> config.mak
- echo "SLIB_UNINSTALL_EXTRA_CMD=${SLIB_UNINSTALL_EXTRA_CMD}" >> config.mak
-fi
-echo "LIB_INSTALL_EXTRA_CMD=${LIB_INSTALL_EXTRA_CMD}" >> config.mak
-echo "EXTRALIBS=$extralibs" >> config.mak
-
-echo "ARCH=$arch" >> config.mak
-
-
-echo "/* Automatically generated by configure - do not modify! */" > $TMPH
-echo "#ifndef FFMPEG_CONFIG_H" >> $TMPH
-echo "#define FFMPEG_CONFIG_H" >> $TMPH
-echo "#define FFMPEG_CONFIGURATION \"$(c_escape $FFMPEG_CONFIGURATION)\"" >> $TMPH
-echo "#define FFMPEG_DATADIR \"$(eval c_escape $datadir)\"" >> $TMPH
+enabled shared && cat >> config.mak <<EOF
+LIBTARGET=${LIBTARGET}
+SLIBNAME=${SLIBNAME}
+SLIBNAME_WITH_VERSION=${SLIBNAME_WITH_VERSION}
+SLIBNAME_WITH_MAJOR=${SLIBNAME_WITH_MAJOR}
+SLIB_CREATE_DEF_CMD=${SLIB_CREATE_DEF_CMD}
+SLIB_EXTRA_CMD=${SLIB_EXTRA_CMD}
+SLIB_INSTALL_EXTRA_CMD=${SLIB_INSTALL_EXTRA_CMD}
+SLIB_UNINSTALL_EXTRA_CMD=${SLIB_UNINSTALL_EXTRA_CMD}
+EOF
-echo "#define CC_TYPE \"$cc_type\"" >> $TMPH
-echo "#define CC_VERSION $cc_version" >> $TMPH
-echo "#define restrict $_restrict" >> $TMPH
+enabled asmalign_pot || align_shift="1 <<"
+
+cat > $TMPH <<EOF
+/* Automatically generated by configure - do not modify! */
+#ifndef FFMPEG_CONFIG_H
+#define FFMPEG_CONFIG_H
+#define FFMPEG_CONFIGURATION "$(c_escape $FFMPEG_CONFIGURATION)"
+#define FFMPEG_LICENSE "$(c_escape $license)"
+#define FFMPEG_DATADIR "$(eval c_escape $datadir)"
+#define CC_TYPE "$cc_type"
+#define CC_VERSION $cc_version
+#define restrict $_restrict
+#define ASMALIGN(ZEROBITS) ".align $align_shift " #ZEROBITS "\\n\\t"
+#define EXTERN_PREFIX "${extern_prefix}"
+#define EXTERN_ASM ${extern_prefix}
+EOF
if enabled small || disabled optimizations; then
echo "#define av_always_inline" >> $TMPH
fi
-
-# Apparently it's not possible to portably echo a backslash.
-enabled asmalign_pot &&
- printf '#define ASMALIGN(ZEROBITS) ".align " #ZEROBITS "\\n\\t"\n' >> $TMPH ||
- printf '#define ASMALIGN(ZEROBITS) ".align 1 << " #ZEROBITS "\\n\\t"\n' >> $TMPH
-
-echo "#define EXTERN_PREFIX \"${extern_prefix}\"" >> $TMPH
-echo "#define EXTERN_ASM ${extern_prefix}" >> $TMPH
-
print_config ARCH_ $TMPH config.mak $ARCH_LIST
print_config HAVE_ $TMPH config.mak $HAVE_LIST
print_config CONFIG_ $TMPH config.mak $CONFIG_LIST \
projects / ffmpeg / blobdiff