VLC_ADD_LDFLAGS([mkv mp4], [-Wl,-framework,IOKit,-framework,CoreFoundation])
VLC_ADD_LDFLAGS([vlc],[-Wl,-undefined,dynamic_lookup])
VLC_ADD_LDFLAGS([libvlc_control],[-Wl,dynamic_lookup])
- VLC_ADD_LDFLAGS([ffmpeg i420_rgb_mmx x264],[-Wl,-read_only_relocs,suppress])
+ VLC_ADD_LDFLAGS([avcodec avformat swscale imgresample postproc i420_rgb_mmx x264],[-Wl,-read_only_relocs,suppress])
VLC_ADD_CFLAGS([motion],[-fconstant-cfstrings])
- VLC_ADD_LDFLAGS([libvlc],[-Wl,-framework,Cocoa,-framework,CoreFoundation])
+ VLC_ADD_LDFLAGS([libvlc],[-Wl,-framework,CoreFoundation])
VLC_ADD_LDFLAGS([motion],[-Wl,-framework,IOKit,-framework,CoreFoundation])
AC_ARG_ENABLE(macosx-defaults,
[ --enable-macosx-defaults Build the default configuration on Mac OS X (default enabled)])
echo " Assuming --enable-twolame"
enable_realrtsp="yes"
echo " Assuming --enable-realrtsp"
+ enable_update_check="yes"
+ echo " Assuming --enable-update-check"
enable_skins2="no"
echo " Assuming --disable-skins2"
VLC_ADD_LDFLAGS([vlc],[-mwindows])
VLC_ADD_LIBS([activex mozilla],[-lgdi32])
VLC_ADD_LIBS([cdda vcdx cddax sdl_image],[-lwinmm])
- VLC_ADD_LIBS([access_http access_mms access_udp access_tcp access_ftp access_rtmp access_output_udp access_output_shout access_output_rtmp sap slp http stream_out_standard stream_out_rtp vod_rtsp access_realrtsp telnet rc netsync gnutls growl_udp flac ts audioscrobbler lua],[-lws2_32])
+ VLC_ADD_LIBS([access_http access_mms access_udp access_tcp access_ftp access_rtmp access_output_udp access_output_shout access_output_rtmp sap slp http stream_out_standard stream_out_rtp vod_rtsp access_realrtsp rtp telnet rc netsync gnutls growl_udp flac ts audioscrobbler lua remoteosd],[-lws2_32])
fi
if test "${SYS}" = "mingwce"; then
# add ws2 for closesocket, select, recv
VLC_ADD_CPPFLAGS([libvlc vlc],[-Dmain(a,b)=maince(a,b)])
VLC_ADD_LDFLAGS([libvlc vlc],[-e WinMainCRTStartup])
- VLC_ADD_LIBS([libvlc access_http access_mms access_udp access_tcp access_ftp access_rtmp access_output_udp sap http netsync audioscrobbler growl rtp stream_out_rtp],[-lws2])
+ VLC_ADD_LIBS([libvlc access_http access_mms access_udp access_tcp access_ftp access_rtmp access_output_udp sap http netsync audioscrobbler growl rtp stream_out_rtp remoteosd],[-lws2])
VLC_ADD_LIBS([libvlc],[-lmmtimer])
fi
;;
AC_CHECK_FUNCS(send,,[
AC_CHECK_LIB(socket,send,[
- VLC_ADD_LIBS([access_http access_mms access_udp access_tcp access_ftp access_rtmp sap access_output_udp access_output_rtmp stream_out_standard growl_udp],[-lsocket])
+ VLC_ADD_LIBS([access_http access_mms access_udp access_tcp access_ftp access_rtmp sap access_output_udp access_output_rtmp stream_out_standard growl_udp remoteosd],[-lsocket])
])
])
VLC_ADD_LIBS([adjust wave ripple psychedelic gradient a52tofloat32 dtstofloat32 x264 goom visual panoramix rotate noise grain],[-lm])
])
AC_CHECK_LIB(m,pow,[
- VLC_ADD_LIBS([ffmpeg ffmpegaltivec stream_out_transrate i420_rgb faad twolame equalizer spatializer param_eq libvlc vorbis freetype mod mpc dmo quicktime realaudio galaktos opengl],[-lm])
+ VLC_ADD_LIBS([avcodec avformat swscale imgresample postproc ffmpegaltivec stream_out_transrate i420_rgb faad twolame equalizer spatializer param_eq libvlc vorbis freetype mod mpc dmo quicktime realaudio realvideo galaktos opengl],[-lm])
])
AC_CHECK_LIB(m,sqrt,[
VLC_ADD_LIBS([headphone_channel_mixer normvol speex mono colorthres extract],[-lm])
ac_cv_my_have_dlopen=yes,
AC_CHECK_LIB(dl, dlopen,
ac_cv_my_have_dlopen=yes
- VLC_ADD_LIBS([libvlc realaudio],[-ldl]),
+ VLC_ADD_LIBS([libvlc realaudio realvideo],[-ldl]),
AC_CHECK_LIB(svld, dlopen,
ac_cv_my_have_dlopen=yes
VLC_ADD_LIBS([libvlc],[-lsvld]))))
if test "${enable_hal}" != "no"
then
PKG_CHECK_MODULES(HAL, hal >= 0.5.0,
- [ AC_DEFINE( HAVE_HAL_1, 1 , [Define if you have the new HAL library API])
+ [
AC_DEFINE( HAVE_HAL, 1, [Define if you have the HAL library] )
VLC_ADD_PLUGIN([hal])
VLC_ADD_PLUGIN([probe_hal])
VLC_ADD_LIBS([libvlc hal probe_hal],[$HAL_LIBS])
- VLC_ADD_CFLAGS([libvlc hal probe_hal],[$HAL_CFLAGS])],
- dnl No hal 0.5 Test for 0.2
- [ PKG_CHECK_MODULES( HAL, hal >= 0.2.97,
- [AC_DEFINE(HAVE_HAL, 1, [Define if you have the HAL library])
- VLC_ADD_PLUGIN([hal])
- VLC_ADD_LIBS([libvlc hal],[$HAL_LIBS])
- VLC_ADD_CFLAGS([libvlc hal],[$HAL_CFLAGS])],
- [AC_MSG_WARN(HAL library not found)])
- ]
+ VLC_ADD_CFLAGS([libvlc hal probe_hal],[$HAL_CFLAGS])],
+ [AC_MSG_WARN([libhal >= 0.5.0 was not found. Install libhal-dev ?])]
)
fi
then
dnl api stable dbus
PKG_CHECK_MODULES(DBUS, dbus-1 >= 1.0.0,
- [ AC_DEFINE( HAVE_DBUS_3, 1, [Define if you have the D-BUS library API >= 1.0.0] )
- AC_DEFINE( HAVE_DBUS_2, 1, [Define if you have the D-BUS library API >= 0.92] )
- AC_DEFINE( HAVE_DBUS_1, 1, [Define if you have the D-BUS library API >= 0.30] )
- AC_DEFINE( HAVE_DBUS, 1, [Define if you have the D-BUS library] )
+ [ AC_DEFINE( HAVE_DBUS, 1, [Define if you have the D-BUS library] )
VLC_ADD_LIBS([screensaver libvlc],[$DBUS_LIBS])
VLC_ADD_CFLAGS([screensaver libvlc],[$DBUS_CFLAGS])
dnl Check for dbus control interface
VLC_ADD_PLUGIN([inhibit])
VLC_ADD_LIBS([inhibit],[$DBUS_LIBS])
VLC_ADD_CFLAGS([inhibit],[$DBUS_CFLAGS])
- ],
- if ${PKG_CONFIG} --exists dbus-1
- then
- [AC_ARG_ENABLE(old-dbus,
- [ --enable-old-dbus Deprecated D-Bus support (default disabled)])]
-
- if test "${enable_old_dbus}" != "yes"
- then
- echo ""
- echo "****** WARNING **** WARNING ***** WARNING *************"
- echo "*** Your D-Bus version is < 1.0.0"
- echo "*** You are using old and buggy software and so"
- echo "*** D-Bus support has been disabled."
- echo "*** Please upgrade D-Bus : http://dbus.freedesktop.org"
- echo "*** Alternatively you can force the use of your old and"
- echo "*** buggy D-Bus version by specifying --enable-old-dbus"
- echo "*******************************************************"
- echo ""
- else
- dnl not too old dbus
- [ PKG_CHECK_MODULES(DBUS, dbus-1 >= 0.92,
- [ AC_DEFINE( HAVE_DBUS_2, 1, [Define if you have the D-BUS library API >= 0.92] )
- AC_DEFINE( HAVE_DBUS_1, 1, [Define if you have the D-BUS library API >= 0.30] )
- AC_DEFINE( HAVE_DBUS, 1, [Define if you have the D-BUS library] )
- VLC_ADD_LIBS([screensaver],[$DBUS_LIBS])
- VLC_ADD_CFLAGS([screensaver],[$DBUS_CFLAGS])],
- dnl older dbus
- [ PKG_CHECK_MODULES(DBUS, dbus-1 >= 0.30,
- [ AC_DEFINE( HAVE_DBUS_1, 1, [Define if you have the D-BUS library API >= 0.30 ] )
- AC_DEFINE( HAVE_DBUS, 1, [Define if you have the D-BUS library] )
- VLC_ADD_LIBS([screensaver],[$DBUS_LIBS])
- VLC_ADD_CFLAGS([screensaver],[$DBUS_CFLAGS])],
- dnl much older dbus
- [ PKG_CHECK_MODULES( DBUS, dbus-1,
- [AC_DEFINE(HAVE_DBUS, 1, [Define if you have the D-BUS library])
- VLC_ADD_LIBS([screensaver],[$DBUS_LIBS])
- VLC_ADD_CFLAGS([screensaver],[$DBUS_CFLAGS])],
- [AC_MSG_WARN(DBUS library not found)])
- ]
- )]
- )]
- fi
- fi
+ ],
+ [AC_MSG_ERROR([Couldn't find DBus >= 1.0.0, install libdbus-dev ?])]
)
fi
;;
CFLAGS_OPTIM_NODEBUG="${CFLAGS_OPTIM_NODEBUG} -fomit-frame-pointer"
fi
-dnl Check for -mdynamic-no-pic
-dnl AC_CACHE_CHECK([if \$CC accepts -mdynamic-no-pic],
-dnl [ac_cv_c_dynamic_no_pic],
-dnl [CFLAGS="${CFLAGS_save} -mdynamic-no-pic"
-dnl AC_TRY_COMPILE([],,ac_cv_c_dynamic_no_pic=yes, ac_cv_c_dynamic_no_pic=no)])
-dnl AS_IF([test "${ac_cv_c_dynamic_no_pic}" != "no"], [
-dnl VLC_ADD_CFLAGS([builtin],[-mdynamic-no-pic])
-dnl VLC_ADD_CFLAGS([libvlc],[-mdynamic-no-pic])
-dnl ])
-
dnl Check for Darwin plugin linking flags
AC_CACHE_CHECK([if \$CC accepts -bundle -undefined error],
[ac_cv_ld_darwin],
VLC_ADD_LDFLAGS([plugin],[-bundle -undefined error])
fi
-dnl Check for standard plugin linking flags
-dnl BeOS' gcc needs -nostart instead of -shared, even if -shared isn't harmful (just a warning)
-dnl AS_IF([test "${SYS}" = "beos"], [
-dnl VLC_ADD_LDFLAGS([plugin mozilla],[-nostart])
-dnl ], [
-dnl AC_CACHE_CHECK([if \$CC accepts -shared],
-dnl [ac_cv_ld_plugins],
-dnl [CFLAGS="${CFLAGS_save} -shared"
-dnl AC_TRY_COMPILE([],, ac_cv_ld_plugins=yes, ac_cv_ld_plugins=no)])
-dnl AS_IF([test "${ac_cv_ld_plugins}" != "no"], [
-dnl VLC_ADD_LDFLAGS([plugin mozilla],[-shared])
-dnl ])
-dnl ])
-
dnl Checks for __attribute__(aligned()) directive
AC_CACHE_CHECK([__attribute__ ((aligned ())) support],
[ac_cv_c_attribute_aligned],
;;
esac
+dnl Check for backtrace() support
+AC_CHECK_HEADERS(execinfo.h)
+AC_CHECK_FUNCS(backtrace)
+
dnl
dnl Enable profiling
dnl
dnl default modules
dnl
VLC_ADD_PLUGIN([dummy])
+VLC_ADD_PLUGIN([stats])
VLC_ADD_PLUGIN([logger])
VLC_ADD_PLUGIN([memcpy])
dnl Demuxers:
VLC_ADD_PLUGIN([m4v])
VLC_ADD_PLUGIN([m4a])
VLC_ADD_PLUGIN([h264])
-VLC_ADD_PLUGIN([vc1])
-VLC_ADD_PLUGIN([demux_cdg])
VLC_ADD_PLUGIN([cdg])
VLC_ADD_PLUGIN([ps])
-VLC_ADD_PLUGIN([pva])
VLC_ADD_PLUGIN([avi])
VLC_ADD_PLUGIN([asf])
VLC_ADD_PLUGIN([mp4])
-VLC_ADD_PLUGIN([rawdv])
-VLC_ADD_PLUGIN([rawvid])
-VLC_ADD_PLUGIN([nsv])
-VLC_ADD_PLUGIN([real])
-VLC_ADD_PLUGIN([aiff])
-VLC_ADD_PLUGIN([mjpeg])
-VLC_ADD_PLUGIN([wav])
-VLC_ADD_PLUGIN([voc])
-VLC_ADD_PLUGIN([smf])
-VLC_ADD_PLUGIN([demuxdump])
-VLC_ADD_PLUGIN([flacsys])
-VLC_ADD_PLUGIN([tta])
-VLC_ADD_PLUGIN([subtitle])
-VLC_ADD_PLUGIN([vobsub])
-VLC_ADD_PLUGIN([a52sys])
-VLC_ADD_PLUGIN([dtssys])
-VLC_ADD_PLUGIN([au])
-VLC_ADD_PLUGIN([ty])
-VLC_ADD_PLUGIN([xa])
-VLC_ADD_PLUGIN([nuv])
dnl Text codecs:
VLC_ADD_PLUGIN([cvdsub])
VLC_ADD_PLUGIN([svcdsub])
dnl Video4Linux2 plugin
dnl
AC_ARG_ENABLE(v4l2,
- [ --enable-v4l2 Video4Linux2 input support (default disabled)])
-if test "${enable_v4l2}" = "yes"
+ [ --enable-v4l2 Video4Linux2 input support (default enabled)])
+if test "${enable_v4l2}" != "no"
then
AC_ARG_WITH(v4l2,
[ --with-v4l2=PATH path to a v4l2-enabled kernel tree],[],[])
AC_CACHE_CHECK([for new linux/videodev2.h],
- [new_linux_videodev2_h],
+ [ac_cv_new_linux_videodev2_h],
[AC_TRY_COMPILE([
#include <sys/types.h>
# ifdef VIDEODEV2_H_FILE
# endif
],
[struct v4l2_ext_controls ctrls; ctrls.ctrl_class = V4L2_CTRL_CLASS_MPEG; ],
- new_linux_videodev2_h=yes,
- new_linux_videodev2_h=no)])
- if test "${new_linux_videodev2_h}" != "no"; then
+ ac_cv_new_linux_videodev2_h=yes,
+ ac_cv_new_linux_videodev2_h=no)])
+ if test "${ac_cv_new_linux_videodev2_h}" != "no"; then
AC_DEFINE(HAVE_NEW_LINUX_VIDEODEV2_H, 1, [Define if new linux/videodev2.h present])
fi
fi
dnl DVB-S/DVB-T/DVB-C satellite/teresterial/cable input using v4l2
dnl
AC_ARG_ENABLE(dvb,
- [ --enable-dvb DVB-S/T/C card support (default disabled)])
+ [ --enable-dvb DVB-S/T/C card support (default enabled)])
-if test "${enable_dvb}" = "yes"
+if test "${enable_dvb}" != "no"
then
AC_ARG_WITH(dvb,
[ --with-dvb=PATH path to a dvb- and v4l2-enabled kernel tree],[],[])
])
dnl
-dnl ffmpeg decoder/demuxer plugin
+dnl avcodec decoder/encoder plugin
dnl
-dnl we try to find ffmpeg using : 1- given tree, 2- pkg-config
-dnl 3- default place,
-AC_ARG_ENABLE(ffmpeg,
-[ --enable-ffmpeg ffmpeg codec (default enabled)])
-if test "${enable_ffmpeg}" != "no"
+AC_ARG_ENABLE(avcodec,
+[ --enable-avcodec libavcodec codec (default enabled)])
+if test "${enable_avcodec}" != "no"
then
+ PKG_CHECK_MODULES(AVCODEC,[libavcodec libavutil],
+ [
+ VLC_SAVE_FLAGS
+ CPPFLAGS="${CPPFLAGS} ${AVCODEC_CFLAGS}"
+ CFLAGS="${CFLAGS} ${AVCODEC_CFLAGS}"
+ AC_CHECK_HEADERS(libavcodec/avcodec.h ffmpeg/avcodec.h)
+ AC_CHECK_HEADERS(libavutil/avutil.h ffmpeg/avutil.h)
+ VLC_ADD_PLUGIN([avcodec])
+ VLC_ADD_LIBS([avcodec],[$AVCODEC_LIBS])
+ VLC_ADD_CFLAGS([avcodec],[$AVCODEC_CFLAGS])
+ VLC_RESTORE_FLAGS
+ ],[
+ AC_MSG_ERROR([Could not find libavcodec or libavutil. Use --disable-avcodec to ignore this error.])
+ ])
+fi
+
+dnl
+dnl avformat demuxer/muxer plugin
+dnl
-dnl Trying with pkg-config
- PKG_CHECK_MODULES(FFMPEG,[libavcodec, libavformat],
+AC_ARG_ENABLE(avformat,
+[ --enable-avformat libavformat containers (default enabled)])
+if test "${enable_avformat}" != "no"
+then
+ PKG_CHECK_MODULES(AVFORMAT,[libavformat libavutil],
[
- VLC_SAVE_FLAGS
- CPPFLAGS="${CPPFLAGS} ${FFMPEG_CFLAGS}"
- CFLAGS="${CFLAGS} ${FFMPEG_CFLAGS}"
- AC_CHECK_HEADERS(ffmpeg/avcodec.h libavcodec/avcodec.h)
- AC_CHECK_HEADERS(ffmpeg/avformat.h libavformat/avformat.h)
- AC_CHECK_HEADERS(ffmpeg/avutil.h libavutil/avutil.h)
- dnl newer ffmpeg have a separate libpostproc
- PKG_CHECK_MODULES(POSTPROC, libpostproc,[
- VLC_ADD_CFLAGS([ffmpeg],[${POSTPROC_CFLAGS}])
- VLC_ADD_LIBS([ffmpeg],[${POSTPROC_LIBS}])
- ])
- CPPFLAGS="${CPPFLAGS} ${POSTPROC_CFLAGS}"
- CFLAGS="${CFLAGS} ${POSTPROC_CFLAGS}"
- AC_CHECK_HEADERS(postproc/postprocess.h)
- VLC_ADD_PLUGIN([ffmpeg])
- if test "${enable_sout}" != "no" -a "${enable_switcher}" = "yes"; then
- VLC_ADD_PLUGIN([stream_out_switcher])
- fi
- VLC_ADD_CFLAGS([ffmpeg stream_out_switcher],[${FFMPEG_CFLAGS}])
- VLC_ADD_LIBS([ffmpeg stream_out_switcher],[${FFMPEG_LIBS}])
-
- dnl even newer ffmpeg has a libswscale
- PKG_CHECK_MODULES(SWSCALE,[libswscale],[
- VLC_ADD_CFLAGS([ffmpeg],[${SWSCALE_CFLAGS}])
- VLC_ADD_LIBS([ffmpeg],[${SWSCALE_LIBS}])
- AC_CHECK_LIB(swscale, sws_getContext,
- [AC_CHECK_HEADERS([ffmpeg/swscale.h libswscale/swscale.h])],
- [AC_CHECK_LIB(avcodec,img_resample,[],
- [AC_MSG_ERROR([Your FFmpeg library doesn't have the needed img_resample() function. You should rebuild it with software scaler disabled, or install the swscale headers.])],
- [${FFMPEG_LIBS}])
- ],
- [${SWSCALE_LIBS}])
- ],[AC_CHECK_LIB(avcodec,img_resample,[],
- [AC_MSG_ERROR([Your FFmpeg library doesn't have the needed img_resample() function. You should rebuild it with software scaler disabled, or install the swscale headers.])],
- [${FFMPEG_LIBS}])
- ]
- )
- VLC_RESTORE_FLAGS
+ VLC_SAVE_FLAGS
+ CPPFLAGS="${CPPFLAGS} ${AVFORMAT_CFLAGS}"
+ CFLAGS="${CFLAGS} ${AVFORMAT_CFLAGS}"
+ AC_CHECK_HEADERS(libavformat/avformat.h ffmpeg/avformat.h)
+ AC_CHECK_HEADERS(libavutil/avutil.h ffmpeg/avutil.h)
+ VLC_ADD_PLUGIN([avformat])
+ VLC_ADD_LIBS([avformat],[$AVFORMAT_LIBS])
+ VLC_ADD_CFLAGS([avformat],[$AVFORMAT_CFLAGS])
+ VLC_RESTORE_FLAGS
+ ],[
+ AC_MSG_ERROR([Could not find libavformat or libavutil. Use --disable-avformat to ignore this error.])
+ ])
+fi
- ],[
+dnl
+dnl swscale image scaling and conversion plugin
+dnl
- dnl
- dnl last chance: at the default place
- dnl
+AC_ARG_ENABLE(swscale,
+[ --enable-swscale libswscale image scaling and conversion (default enabled)])
+if test "${enable_swscale}" != "no"
+then
+ PKG_CHECK_MODULES(SWSCALE,[libswscale],
+ [
VLC_SAVE_FLAGS
- CPPFLAGS="${CPPFLAGS_save} ${CPPFLAGS_ffmpeg}"
- LDFLAGS="${LDFLAGS_save} ${LDFLAGS_ffmpeg} ${LIBS_ffmpeg}"
- AC_CHECK_HEADERS(ffmpeg/avcodec.h libavcodec/avcodec.h)
- AC_CHECK_HEADERS(ffmpeg/avformat.h libavformat/avformat.h)
- AC_CHECK_HEADERS(ffmpeg/avutil.h libavutil/avutil.h)
- AC_CHECK_HEADERS(postproc/postprocess.h)
-
- AC_CHECK_LIB(avutil, av_crc_init, [
- VLC_ADD_LIBS([ffmpeg],[-lavutil])
- LDAVUTIL="-lavutil"])
-
- AC_CHECK_LIB(avcodec, avcodec_init, [
- VLC_ADD_BUILTINS([ffmpeg])
- VLC_ADD_LIBS([ffmpeg],[-lavcodec])
- if test "${enable_sout}" != "no" -a "${enable_switcher}" = "yes"; then
- VLC_ADD_BUILTINS([stream_out_switcher])
- fi],
- [ AC_MSG_ERROR([Could not find ffmpeg on your system: you may get it from http://ffmpeg.sf.net/ (svn version is recommended). Alternatively you can use --disable-ffmpeg to disable the ffmpeg plugins.]) ], [$LDAVUTIL])
-
- AC_CHECK_LIB(postproc, pp_postprocess, [
- VLC_ADD_LIBS([ffmpeg],[-lpostproc])],
- AC_MSG_ERROR([Could not find libpostproc inside FFmpeg. You should configure FFmpeg with --enable-gpl --enable-postproc.]),
- [$LDAVUTIL])
-
- AC_CHECK_LIB(avformat, av_open_input_stream, [
- VLC_ADD_LIBS([ffmpeg],[-lavformat -lz]) ], [], [-lavcodec -lz $LDAVUTIL])
+ CPPFLAGS="${CPPFLAGS} ${SWSCALE_CFLAGS}"
+ CFLAGS="${CFLAGS} ${SWSCALE_CFLAGS}"
+ AC_CHECK_HEADERS(libswscale/swscale.h ffmpeg/swscale.h)
+ VLC_ADD_PLUGIN([swscale])
+ VLC_ADD_LIBS([swscale],[$SWSCALE_LIBS])
+ VLC_ADD_CFLAGS([swscale],[$SWSCALE_CFLAGS])
VLC_RESTORE_FLAGS
+ ],[
+ AC_MSG_WARN([Could not find libswscale. Trying to enable imgresample.])
+ enable_imgresample=yes
+ ])
+fi
- AC_CHECK_LIB(swscale, sws_getContext, [
- AC_CHECK_HEADERS(ffmpeg/swscale.h libswscale/swscale.h)
- VLC_ADD_LIBS([ffmpeg],[-lswscale]) ],
- [AC_CHECK_LIB(avcodec,img_resample,[],
- [AC_MSG_ERROR([Your FFmpeg library doesn't have the needed img_resample() function. You should rebuild it with software scaler disabled, or install the swscale headers.])],
- [-lavcodec $LDAVUTIL])
- ],
- [${SWSCALE_LIBS}])
+dnl
+dnl avcodec (deprecated API) image scaling and conversion plugin
+dnl
+dnl This is build as a seperate module than the avcodec one to prevent
+dnl stupid run time library load errors from disabling most codecs
+dnl from VLC.
+dnl
+
+AC_ARG_ENABLE(imgresample,
+[ --enable-imgresample deprecated libavcodec image scaling and conversion (default disabled)])
+if test "${enable_imgresample}" = "yes"
+then
+ PKG_CHECK_MODULES(IMGRESAMPLE,[libavcodec],
+ [
+ VLC_SAVE_FLAGS
+ CPPFLAGS="${CPPFLAGS} ${IMGRESAMPLE_CFLAGS}"
+ CFLAGS="${CFLAGS} ${IMGRESAMPLE_CFLAGS}"
+ AC_CHECK_HEADERS(libavcodec/avcodec.h ffmpeg/avcodec.h)
+ AC_CHECK_LIB(avcodec,img_resample,
+ [
+ VLC_ADD_PLUGIN([imgresample])
+ VLC_ADD_LIBS([imgresample],[$IMGRESAMPLE_LIBS])
+ VLC_ADD_CFLAGS([imgresample],[$IMGRESAMPLE_CFLAGS])
+ ],[
+ AC_MSG_WARN([Could not find img_resample in libavcodec.])
+ if test "${enable_swscale}" != "no"
+ then
+ AC_MSG_ERROR([swscale (and its fallback module imgresample) support will be missing. Use --disable-swscale to ignore this error. (This basically means that you will be missing any good software scaling module and some video chroma converters.)])
+ fi
+ # That sed hack to add -rpath is kind of ugly but at least it fixes
+ # detection when linking against a shared libavcodec with
+ # a libavutil not in one of your ld.so.conf directories.
+ # (for example a local install)
+ ],[${IMGRESAMPLE_LIBS} `echo ${IMGRESAMPLE_LIBS}|sed s'/-L/-Wl,-rpath=/'`])
+ VLC_RESTORE_FLAGS
+ ],[
+ AC_MSG_WARN([Could not find libavcodec.])
+ ])
+fi
+
+dnl
+dnl postproc plugin
+dnl
+AC_ARG_ENABLE(postproc,
+[ --enable-postproc libpostproc image post-processing (default enabled)])
+if test "${enable_postproc}" != "no"
+then
+ PKG_CHECK_MODULES(POSTPROC,[libpostproc libavutil],
+ [
+ VLC_SAVE_FLAGS
+ CPPFLAGS="${CPPFLAGS} ${POSTPROC_CFLAGS}"
+ CFLAGS="${CFLAGS} ${POSTPROC_CFLAGS}"
+ AC_CHECK_HEADERS(libpostproc/postproc.h postproc/postprocess.h)
+ VLC_ADD_PLUGIN([postproc])
+ VLC_ADD_LIBS([postproc],[$POSTPROC_LIBS])
+ VLC_ADD_CFLAGS([postproc],[$POSTPROC_CFLAGS])
VLC_RESTORE_FLAGS
+ ],[
+ AC_MSG_ERROR([Could not find libpostproc.])
])
fi
dnl Real plugin
dnl
AC_ARG_ENABLE(real,
- [ --enable-real Real audio module (default disabled)])
+ [ --enable-real Real media module (default disabled)])
if test "${enable_real}" = "yes"; then
VLC_ADD_PLUGIN([realaudio])
+ VLC_ADD_PLUGIN([realvideo])
fi
dnl
AC_ARG_ENABLE(kate,
[ --enable-kate kate codec (default enabled)])
AS_IF([test "${enable_kate}" != "no"], [
- PKG_CHECK_MODULES(KATE,[kate >= 0.1.1], [
+ PKG_CHECK_MODULES(KATE,[kate >= 0.1.2], [
VLC_ADD_PLUGIN([kate])
VLC_ADD_CFLAGS([kate],[$KATE_CFLAGS])
VLC_ADD_LIBS([kate],[$KATE_LIBS]) ],[
CPPFLAGS="${CPPFLAGS_save}"
fi
-dnl
-dnl Qt Video output module
-dnl (disabled by default)
-dnl
-dnl AC_ARG_ENABLE(qt_video,
-dnl [ --enable-qt_video QT Video Output support (default disabled)])
-dnl if test "${enable_qt_video}" = "yes"
-dnl then
-dnl VLC_ADD_PLUGIN([qt_video])
-dnl VLC_ADD_LIBS([qt_video],[-L${QTDIR}/lib])
-dnl LDFLAGS="${LDFLAGS_save} ${LDFLAGS_qt_video}"
-dnl AC_CHECK_LIB(qt-mt,main,[
-dnl VLC_ADD_LIBS([qt_video],[-lqt-mt])
-dnl ],[
-dnl AC_CHECK_LIB(qt,main,[
-dnl VLC_ADD_LIBS([qt_video],[-lqt])
-dnl ])
-dnl ])
-dnl NEED_QTE_MAIN=yes
-dnl LDFLAGS="${LDFLAGS_save}"
-dnl VLC_ADD_CXXFLAGS([qt_video],[-I/usr/include/qt3 -I/usr/include/qt -I${QTDIR}/include])
-dnl fi
-
dnl
dnl Roku HD1000 Video output module
dnl
[ VLC_ADD_PLUGIN([pulse])
VLC_ADD_CFLAGS([pulse],[${PULSE_CFLAGS}])
VLC_ADD_LDFLAGS([pulse],[${PULSE_LIBS}])],
- [AC_MSG_WARN(pulsaudio library not found)])
+ [AC_MSG_WARN(pulseaudio library not found)])
fi
dnl
fi
AM_CONDITIONAL(BUILD_SKINS, [test "${enable_skins2}" = "yes"])
-dnl dnl
-dnl dnl Gtk+ module
-dnl dnl
-dnl AC_ARG_ENABLE(gtk,
-dnl [ --enable-gtk Gtk+ support (default enabled)])
-dnl if test "${enable_gtk}" != "no"
-dnl then
-dnl GTK_PATH="${PATH}"
-dnl AC_ARG_WITH(gtk-config-path,
-dnl [ --with-gtk-config-path=PATH gtk-config path (default search in \$PATH)],
-dnl [ if test "${with_gtk_config_path}" != "no"
-dnl then
-dnl GTK_PATH="${with_gtk_config_path}:${PATH}"
-dnl fi ])
-dnl # look for gtk-config
-dnl AC_PATH_PROG(GTK12_CONFIG, gtk12-config, no, ${GTK_PATH})
-dnl GTK_CONFIG=${GTK12_CONFIG}
-dnl if test "${GTK_CONFIG}" = "no"
-dnl then
-dnl AC_PATH_PROG(GTK_CONFIG, gtk-config, no, ${GTK_PATH})
-dnl fi
-dnl if test "${GTK_CONFIG}" != "no"
-dnl then
-dnl if expr 1.2.0 \> `${GTK_CONFIG} --version` >/dev/null
-dnl then
-dnl AC_MSG_ERROR([Your development package for Gtk+ is too old, you need at least version 1.2.0. Please upgrade and try again. Alternatively you can also configure with --disable-gtk.])
-dnl fi
-dnl if test "${SYS}" != "mingw32"; then
-dnl VLC_ADD_CFLAGS([gtk],[`${GTK_CONFIG} --cflags gtk gthread`])
-dnl VLC_ADD_LIBS([gtk],[`${GTK_CONFIG} --libs gtk gthread | sed 's,-rdynamic,,'`])
-dnl else
-dnl VLC_ADD_CFLAGS([gtk],[`${GTK_CONFIG} --cflags gtk`])
-dnl VLC_ADD_LIBS([gtk],[`${GTK_CONFIG} --libs gtk | sed 's,-rdynamic,,'`])
-dnl fi
-dnl # now look for the gtk.h header
-dnl CPPFLAGS="${CPPFLAGS_save} ${CFLAGS_gtk}"
-dnl ac_cv_gtk_headers=yes
-dnl AC_CHECK_HEADERS(gtk/gtk.h glib.h gdk/gdk.h, , [
-dnl ac_cv_gtk_headers=no
-dnl echo "Cannot find gtk development headers."
-dnl ])
-dnl if test "${ac_cv_gtk_headers}" = "yes"
-dnl then
-dnl VLC_ADD_PLUGIN([gtk])
-dnl if test "${SYS}" != "mingw32"; then
-dnl NEED_GTK_MAIN=yes
-dnl fi
-dnl ALIASES="${ALIASES} gvlc"
-dnl fi
-dnl CPPFLAGS="${CPPFLAGS_save}"
-dnl fi
-dnl fi
-dnl
-dnl
-dnl Gtk+2 module ! Disabled for now as it is unusable and confuses users
-dnl
-dnl AC_ARG_ENABLE(gtk2,
-dnl [ --enable-gtk2 Gtk2 support (default disabled)])
-dnl if test "${enable_gtk2}" = "yes"
-dnl then
-dnl PKG_CHECK_MODULES(GTK2, [gtk+-2.0 >= 2.0.0, gthread-2.0])
-dnl VLC_ADD_CFLAGS([gtk2],[${GTK2_CFLAGS}])
-dnl VLC_ADD_LIBS([gtk2],[${GTK2_LIBS}])
-dnl VLC_ADD_PLUGIN([gtk2])
-dnl if test "${SYS}" != "mingw32"; then
-dnl NEED_GTK2_MAIN=yes
-dnl fi
-dnl fi
-
dnl
dnl PDA Gtk+2 module
dnl
fi
AM_CONDITIONAL(BUILD_PDA, [test "${enable_pda}" = "yes"])
-dnl dnl
-dnl dnl Gnome module
-dnl dnl
-dnl AC_ARG_ENABLE(gnome,
-dnl [ --enable-gnome Gnome interface support (default disabled)],
-dnl [if test "${enable_gnome}" = "yes"; then
-dnl # look for gnome-config
-dnl AC_PATH_PROG(GNOME_CONFIG, gnome-config, no)
-dnl if test -x ${GNOME_CONFIG}
-dnl then
-dnl VLC_ADD_CFLAGS([gnome],[`${GNOME_CONFIG} --cflags gtk gnomeui`])
-dnl VLC_ADD_LIBS([gnome],[`${GNOME_CONFIG} --libs gnomeui | sed 's,-rdynamic,,'`])
-dnl fi
-dnl # now look for the gnome.h header
-dnl CPPFLAGS="${CPPFLAGS_save} ${CFLAGS_gnome}"
-dnl AC_CHECK_HEADERS(gnome.h, [
-dnl VLC_ADD_PLUGIN([gnome])
-dnl NEED_GTK_MAIN=yes
-dnl NEED_GNOME_MAIN=yes
-dnl ALIASES="${ALIASES} gnome-vlc"
-dnl dnl We need this because of some moronic gnomesupport.h flavours
-dnl AC_MSG_CHECKING(for strndup in gnome.h)
-dnl AC_EGREP_HEADER(strndup,gnome.h,[
-dnl AC_MSG_RESULT(yes)
-dnl AC_DEFINE(STRNDUP_IN_GNOME_H, 1,
-dnl Define if <gnome.h> defines strndup.)],[
-dnl AC_MSG_RESULT(no)])
-dnl ],[
-dnl AC_MSG_ERROR([Can't find gnome headers. Please install the gnome
-dnl developement tools or remove the --enable-gnome option])
-dnl ])
-dnl CPPFLAGS="${CPPFLAGS_save}"
-dnl fi])
-
-dnl
-dnl Gnome2 module ! Disabled for know as it is unuseable and confuses users
-dnl
-dnl AC_ARG_ENABLE(gnome2,
-dnl [ --enable-gnome2 Gnome2 support (default disabled)])
-dnl if test "${enable_gnome2}" = "yes"
-dnl then
-dnl PKG_CHECK_MODULES(GNOME2, [libgnomeui-2.0])
-dnl VLC_ADD_CFLAGS([gnome2],[${GNOME2_CFLAGS}])
-dnl VLC_ADD_LIBS([gnome2],[${GNOME2_LIBS}])
-dnl VLC_ADD_PLUGIN([gnome2])
-dnl if test "${SYS}" != "mingw32"; then
-dnl NEED_GNOME2_MAIN=yes
-dnl fi
-dnl fi
-
dnl
dnl wxWidgets module
dnl
fi
fi
-dnl dnl
-dnl dnl Qt module
-dnl dnl
-dnl AC_ARG_ENABLE(qt,
-dnl [ --enable-qt Qt interface support (default disabled)],
-dnl [if test "${enable_qt}" = "yes"; then
-dnl VLC_ADD_PLUGIN([qt])
-dnl ALIASES="${ALIASES} qvlc"
-dnl VLC_ADD_LIBS([qt],[-L${QTDIR}/lib])
-dnl LDFLAGS="${LDFLAGS_save} ${LDFLAGS_qt}"
-dnl AC_CHECK_LIB(qt-mt,main,[
-dnl VLC_ADD_LIBS([qt],[-lqt-mt])
-dnl ],[
-dnl AC_CHECK_LIB(qt,main,[
-dnl VLC_ADD_LIBS([qt],[-lqt])
-dnl ])
-dnl ])
-dnl LDFLAGS="${LDFLAGS_save}"
-dnl VLC_ADD_CXXFLAGS([qt],[-I/usr/include/qt3 -I/usr/include/qt -I${QTDIR}/include])
-dnl if test -x ${QTDIR}/bin/moc
-dnl then
-dnl MOC=${QTDIR}/bin/moc
-dnl else
-dnl MOC=moc
-dnl fi
-dnl fi])
-dnl
-dnl dnl
-dnl dnl KDE module
-dnl dnl
-dnl AC_ARG_ENABLE(kde,
-dnl [ --enable-kde KDE interface support (default disabled)],
-dnl [if test "${enable_kde}" = "yes"; then
-dnl VLC_ADD_PLUGIN([kde])
-dnl ALIASES="${ALIASES} kvlc"
-dnl VLC_ADD_LIBS([kde],[-L${KDEDIR}/lib])
-dnl dnl Check for -lkfile (only in KDE 2) or -lkdeui -lkio (KDE 3)
-dnl LDFLAGS="${LDFLAGS_save} ${LDFLAGS_kde}"
-dnl AC_CHECK_LIB(kfile,main,[
-dnl VLC_ADD_LIBS([kde],[-lkfile])
-dnl ])
-dnl LDFLAGS="${LDFLAGS_save} ${LDFLAGS_kde}"
-dnl AC_CHECK_LIB(kdeui,main,[
-dnl VLC_ADD_LIBS([kde],[-lkdeui])
-dnl ])
-dnl LDFLAGS="${LDFLAGS_save} ${LDFLAGS_kde}"
-dnl AC_CHECK_LIB(kio,main,[
-dnl VLC_ADD_LIBS([kde],[-lkio])
-dnl ])
-dnl LDFLAGS="${LDFLAGS_save}"
-dnl VLC_ADD_CXXFLAGS([kde],[-I/usr/include/kde -I/usr/include/qt3 -I/usr/include/qt])
-dnl VLC_ADD_CXXFLAGS([kde],[-I${KDEDIR}/include -I${QTDIR}/include])
-dnl if test -x ${QTDIR}/bin/moc
-dnl then
-dnl MOC=${QTDIR}/bin/moc
-dnl else
-dnl MOC=moc
-dnl fi
-dnl fi])
-
dnl
dnl Opie QT embedded module
dnl
dnl
AC_ARG_ENABLE(libgcrypt,
[ --enable-libgcrypt libgcrypts support (default enabled)])
-
-GCRYPT_PATH="${PATH}"
-AC_ARG_WITH(libgcrypt-config-path,
-[ --with-libgcrypt-config-path=PATH libgcrypt-config path (default search in \$PATH)],
- [ if test "${with_libgcrypt_config_path}" != "no"
- then
- GCRYPT_PATH="${with_libgcrypt_config_path}:${PATH}"
- fi ])
-
-if test "${enable_libgcrypt}" != "no"
-then
- dnl Workaround for cross-compiling since AM_PATH_LIBGRYPT doesn't dectect
- dnl it and looks for libgcrypt headers in the wrong place.
- if test "${host_cpu}" = "${build_cpu}"
- then
- AM_PATH_LIBGCRYPT([1:1.1.94], [have_libgcrypt="yes"], [have_libgcrypt="no"])
- else
- AC_CHECK_HEADERS(gcrypt.h,have_libgcrypt="yes",have_libgcrypt="no")
- fi
+AS_IF([test "${enable_libgcrypt}" != "no"], [
+ AM_PATH_LIBGCRYPT([1:1.1.94], [have_libgcrypt="yes"], [have_libgcrypt="no"])
+])
+if test "${SYS}" = "mingw32" -o "${SYS}" = "mingwce"; then
+ AS_IF([test "${have_libgcrypt}" = "yes"],[
+ VLC_ADD_LIBS([rtp], [${LIBGCRYPT_LIBS}])
+ ])
fi
AM_CONDITIONAL([HAVE_LIBGCRYPT], [test "${have_libgcrypt}" = "yes"])
-AS_IF([test "${have_libgcrypt}" = "yes"],[
- # look for libgcrypt-config
- AC_PATH_PROG(GCRYPT_CONFIG, "libgcrypt-config", no, ${GCRYPT_PATH})
- GCRYPT_CFLAGS=`${GCRYPT_CONFIG} --cflags`
- GCRYPT_LIBS=`${GCRYPT_CONFIG} --libs`
-])
dnl
dnl TLS/SSL
VLC_ADD_LIBS([gnutls], [-lz])
VLC_ADD_LIBS([gnutls], [${LTLIBINTL}])
])
+ dnl The GnuTLS plugin invokes gcry_control directly.
AS_IF([test "${have_libgcrypt}" = "yes"],[
- VLC_ADD_LIBS([gnutls], ${GCRYPT_LIBS})
- VLC_ADD_CFLAGS([gnutls], ${GCRYPT_CFLAGS})
- ], [-lgpg-error])
+ VLC_ADD_LIBS([gnutls], [${LIBGCRYPT_LIBS}])
+ VLC_ADD_CFLAGS([gnutls], [${LIBGCRYPT_CFLAGS}])
+ ])
VLC_ADD_LIBS([gnutls], [$GNUTLS_LIBS])
], [
AS_IF([test "${enable_gnutls}" = "yes"], [
])
])
+
+dnl
+dnl RemoteOSD plugin (VNC client as video filter)
+dnl
+AC_ARG_ENABLE(remoteosd,
+ [ --disable-remoteosd RemoteOSD plugin (default enabled)])
+
+AS_IF([test "${enable_remoteosd}" != "no"], [
+ AS_IF([test "${have_libgcrypt}" = "yes"],[
+ VLC_ADD_PLUGIN([remoteosd])
+ VLC_ADD_LIBS([remoteosd], ${LIBGCRYPT_LIBS})
+ VLC_ADD_CFLAGS([remoteosd], ${LIBGCRYPT_CFLAGS})
+ ], [
+ AC_MSG_ERROR([libgcrypt support required for RemoteOSD plugin])
+ ])
+])
+
+
dnl
dnl update checking system
dnl
then
AC_MSG_ERROR([libgcrypt is required for update checking system])
fi
- VLC_ADD_LIBS([libvlc], ${GCRYPT_LIBS})
- VLC_ADD_CFLAGS([libvlc], ${GCRYPT_CFLAGS})
+ VLC_ADD_LIBS([libvlc], [${LIBGCRYPT_LIBS}])
+ VLC_ADD_CFLAGS([libvlc], [${LIBGCRYPT_CFLAGS}])
AC_DEFINE([UPDATE_CHECK], 1, [Define if you want to use the VLC update mechanism])
fi
VLC_ADD_LIBS([quicktime],[../../libs/loader/libloader.la -lpthread])
VLC_ADD_CPPFLAGS([realaudio],[-I../../@top_srcdir@/libs/loader -DLOADER])
VLC_ADD_LIBS([realaudio],[../../libs/loader/libloader.la])
+ VLC_ADD_CPPFLAGS([realvideo],[-I../../@top_srcdir@/libs/loader -DLOADER])
+ VLC_ADD_LIBS([realvideo],[../../libs/loader/libloader.la])
])
AC_ARG_WITH(,[Components:])
modules/audio_mixer/Makefile
modules/audio_output/Makefile
modules/codec/Makefile
+ modules/codec/avcodec/Makefile
modules/codec/cmml/Makefile
modules/codec/dmo/Makefile
- modules/codec/ffmpeg/Makefile
modules/codec/subtitles/Makefile
modules/codec/spudec/Makefile
modules/codec/xvmc/Makefile
modules/control/http/Makefile
modules/demux/Makefile
modules/demux/asf/Makefile
+ modules/demux/avformat/Makefile
modules/demux/avi/Makefile
modules/demux/mp4/Makefile
modules/demux/mpeg/Makefile
modules/misc/testsuite/Makefile
modules/misc/playlist/Makefile
modules/misc/osd/Makefile
+ modules/misc/stats/Makefile
modules/misc/xml/Makefile
modules/misc/probe/Makefile
modules/mux/Makefile
modules/mux/mpeg/Makefile
- modules/mux/rtp/Makefile
modules/packetizer/Makefile
modules/services_discovery/Makefile
modules/stream_out/Makefile
${SHELL} ./config.status --file=vlc-config
chmod 0755 vlc-config
-dnl echo "Enabled builtin modules :"
-dnl for a in `./vlc-config --target builtin` ; do echo $a; done | sed -e 's,modules\/\(.*\)\/lib\(.*\)\.a,\2 (\1),'
-
-dnl echo "Enabled plugin modules :"
-dnl for a in `./vlc-config --target plugin` ; do echo $a; done | sed -e 's,modules\/\(.*\)\/lib\(.*\)_plugin,\2 (\1),'
+/bin/echo -n "Enabled modules :"
+./vlc-config --list plugin
dnl Shortcut to nice compile message
rm -f compile
fi
echo "plugins/bindings :${PLUGINS_BINDINGS}
-You can check which modules have been enabled
-with \`./vlc-config --list plugin'.
You can tune the compiler flags in vlc-config.
To build vlc and its plugins, type \`./compile' or \`make'.
"