# Want to map an extended ROM, such as CDTV or CD32?
#map type=rom address=0xF00000 size=0x80000 file=cdtv.rom
-# Map 128MB of Fast RAM at 0x8000000.
-map type=ram address=0x08000000 size=128M id=cpu_slot_ram
-# 128MB of Z3 Fast at the first proper address
-#map type=ram address=0x10000000 size=128M id=z3_autoconf_fast
+# Map 128MB of Fast RAM at 0x8000000, also known as 32-bit Fast RAM or CPU local Fast RAM.
+# Only supported properly on select Kickstarts, such as 3.1+ for Amiga 1200, 3000 and 4000.
+#map type=ram address=0x08000000 size=128M id=cpu_slot_ram
+# Map 128MB of Z3 Fast. Note that the address here is not actually used, as it gets auto-assigned by Kickstart itself.
+# Enabling Z3 fast requires at least Kickstart 2.0.
+map type=ram address=0x10000000 size=128M id=z3_autoconf_fast
# Max 8MB of Z2 Fast can be mapped due to addressing space limitations, but for instance 2+4MB can be chained to leave 2MB for something else.
-map type=ram address=0x200000 size=8M id=z2_autoconf_fast
+#map type=ram address=0x200000 size=8M id=z2_autoconf_fast
#map type=ram address=0x200000 size=2M id=z2_autoconf_fast
#map type=ram address=0x400000 size=4M id=z2_autoconf_fast
#map type=ram address=0x0 size=2M
# Map Gayle as a register range.
-map type=register address=0xD80000 size=0x70000
+# NOTE: Gayle emulation is currently non-functional. Do not enable this.
+#map type=register address=0xD80000 size=0x40000
+# Map RTC as a register range.
+map type=register address=0xDC0000 size=0x30000
# Number of instructions to run every main loop.
loopcycles 300
# Set the platform to Amiga to enable all the registers and stuff.
platform amiga
+# Uncomment to let reads/writes through from/to the RTC memory range
+#setvar enable_rtc_emulation 0
+# Uncomment to enable RTG
+#setvar rtg
+# Uncomment to enable CDTV mode (not working, requires Kickstart 1.3+CDTV extended ROM)
+#setvar cdtv
+# Uncomment this line to enable the PiSCSI interface
+#setvar piscsi
+# Use setvar piscsi0 through piscsi6 to add up to seven mapped drives to the interface.
+#setvar piscsi0 PI0.hdf
+#setvar piscsi1 PI1.hdf
+# Uncomment this line to enable the (currently non-working) Pi-Net interface.
+#setvar pi-net
-# Forward mouse events to host system, defaults to off unless toggle key is pressed on the Pi.
-# Syntax is mouse [device] [toggle key]
-#mouse /dev/input/mouse0 m
# Forward keyboard events to host system, defaults to off unless toggle key is pressed, toggled off using F12.
-#keyboard k
+# Syntax: keyboard [grab key] [grab|nograb] [autoconnect|noautoconnect]
+# "grab" steals the keyboard from the Pi so Amiga/etc. input is not sent to the Pi
+# (also helps prevent sending any ctrl-alt-del to the Amiga from resetting the Pi)
+#
+# "autoconnect" connects the keyboard to the Amiga/etc. on startup
+keyboard k nograb noautoconnect
+# Select a specific filename for the keyboard event source.
+# This is typically /dev/input/event1 or event0, but it may be event3 with for instance a wireless keyboard.
+# Use ls /dev/input/event* to check which event files are available and try until you find the one that works.
+#kbfile /dev/input/event1
+# Forward mouse events to host system, defaults to off unless toggle key is pressed on the Pi.
+# Syntax is mouse [device] [toggle key] [autoconnect|noautoconnect]
+# (see "keyboard" above for autoconnect description)
+mouse /dev/input/mice m noautoconnect
projects / pistorm / blobdiff