@sp 3
@end titlepage
+@chapter Synopsis
-@chapter Introduction
+The generic syntax is:
+
+@example
+@c man begin SYNOPSIS
+ffmpeg [[infile options][@option{-i} @var{infile}]]... @{[outfile options] @var{outfile}@}...
+@c man end
+@end example
+
+@chapter Description
+@c man begin DESCRIPTION
FFmpeg is a very fast video and audio converter. It can also grab from
a live audio/video source.
FFmpeg can also convert from any sample rate to any other, and resize
video on the fly with a high quality polyphase filter.
-@chapter Quick Start
-
-@c man begin EXAMPLES
-@section Video and Audio grabbing
-
-FFmpeg can grab video and audio from devices given that you specify the input
-format and device.
-
-@example
-ffmpeg -f oss -i /dev/dsp -f video4linux2 -i /dev/video0 /tmp/out.mpg
-@end example
-
-Note that you must activate the right video source and channel before
-launching FFmpeg with any TV viewer such as xawtv
-(@url{http://bytesex.org/xawtv/}) by Gerd Knorr. You also
-have to set the audio recording levels correctly with a
-standard mixer.
-
-@section X11 grabbing
-
-FFmpeg can grab the X11 display.
-
-@example
-ffmpeg -f x11grab -s cif -i :0.0 /tmp/out.mpg
-@end example
-
-0.0 is display.screen number of your X11 server, same as
-the DISPLAY environment variable.
-
-@example
-ffmpeg -f x11grab -s cif -i :0.0+10,20 /tmp/out.mpg
-@end example
-
-0.0 is display.screen number of your X11 server, same as the DISPLAY environment
-variable. 10 is the x-offset and 20 the y-offset for the grabbing.
-
-@section Video and Audio file format conversion
-
-* FFmpeg can use any supported file format and protocol as input:
-
-Examples:
-
-* You can use YUV files as input:
-
-@example
-ffmpeg -i /tmp/test%d.Y /tmp/out.mpg
-@end example
-
-It will use the files:
-@example
-/tmp/test0.Y, /tmp/test0.U, /tmp/test0.V,
-/tmp/test1.Y, /tmp/test1.U, /tmp/test1.V, etc...
-@end example
-
-The Y files use twice the resolution of the U and V files. They are
-raw files, without header. They can be generated by all decent video
-decoders. You must specify the size of the image with the @option{-s} option
-if FFmpeg cannot guess it.
-
-* You can input from a raw YUV420P file:
-
-@example
-ffmpeg -i /tmp/test.yuv /tmp/out.avi
-@end example
-
-test.yuv is a file containing raw YUV planar data. Each frame is composed
-of the Y plane followed by the U and V planes at half vertical and
-horizontal resolution.
-
-* You can output to a raw YUV420P file:
-
-@example
-ffmpeg -i mydivx.avi hugefile.yuv
-@end example
-
-* You can set several input files and output files:
-
-@example
-ffmpeg -i /tmp/a.wav -s 640x480 -i /tmp/a.yuv /tmp/a.mpg
-@end example
-
-Converts the audio file a.wav and the raw YUV video file a.yuv
-to MPEG file a.mpg.
-
-* You can also do audio and video conversions at the same time:
-
-@example
-ffmpeg -i /tmp/a.wav -ar 22050 /tmp/a.mp2
-@end example
-
-Converts a.wav to MPEG audio at 22050Hz sample rate.
-
-* You can encode to several formats at the same time and define a
-mapping from input stream to output streams:
-
-@example
-ffmpeg -i /tmp/a.wav -ab 64k /tmp/a.mp2 -ab 128k /tmp/b.mp2 -map 0:0 -map 0:0
-@end example
-
-Converts a.wav to a.mp2 at 64 kbits and to b.mp2 at 128 kbits. '-map
-file:index' specifies which input stream is used for each output
-stream, in the order of the definition of output streams.
-
-* You can transcode decrypted VOBs:
-
-@example
-ffmpeg -i snatch_1.vob -f avi -vcodec mpeg4 -b 800k -g 300 -bf 2 -acodec libmp3lame -ab 128k snatch.avi
-@end example
-
-This is a typical DVD ripping example; the input is a VOB file, the
-output an AVI file with MPEG-4 video and MP3 audio. Note that in this
-command we use B-frames so the MPEG-4 stream is DivX5 compatible, and
-GOP size is 300 which means one intra frame every 10 seconds for 29.97fps
-input video. Furthermore, the audio stream is MP3-encoded so you need
-to enable LAME support by passing @code{--enable-libmp3lame} to configure.
-The mapping is particularly useful for DVD transcoding
-to get the desired audio language.
-
-NOTE: To see the supported input formats, use @code{ffmpeg -formats}.
-
-* You can extract images from a video:
-
-@example
-ffmpeg -i foo.avi -r 1 -s WxH -f image2 foo-%03d.jpeg
-@end example
-
-This will extract one video frame per second from the video and will
-output them in files named @file{foo-001.jpeg}, @file{foo-002.jpeg},
-etc. Images will be rescaled to fit the new WxH values.
-
-The syntax @code{foo-%03d.jpeg} specifies to use a decimal number
-composed of three digits padded with zeroes to express the sequence
-number. It is the same syntax supported by the C printf function, but
-only formats accepting a normal integer are suitable.
-
-If you want to extract just a limited number of frames, you can use the
-above command in combination with the -vframes or -t option, or in
-combination with -ss to start extracting from a certain point in time.
-
-* You can put many streams of the same type in the output:
-
-@example
-ffmpeg -i test1.avi -i test2.avi -vcodec copy -acodec copy -vcodec copy -acodec copy test12.avi -newvideo -newaudio
-@end example
-
-In addition to the first video and audio streams, the resulting
-output file @file{test12.avi} will contain the second video
-and the second audio stream found in the input streams list.
-
-The @code{-newvideo}, @code{-newaudio} and @code{-newsubtitle}
-options have to be specified immediately after the name of the output
-file to which you want to add them.
-@c man end
-
-@chapter Invocation
-
-@section Syntax
-
-The generic syntax is:
-
-@example
-@c man begin SYNOPSIS
-ffmpeg [[infile options][@option{-i} @var{infile}]]... @{[outfile options] @var{outfile}@}...
-@c man end
-@end example
-@c man begin DESCRIPTION
As a general rule, options are applied to the next specified
file. Therefore, order is important, and you can have the same
option on the command line multiple times. Each occurrence is
By default, FFmpeg tries to convert as losslessly as possible: It
uses the same audio and video parameters for the outputs as the one
specified for the inputs.
-@c man end
-@c man begin OPTIONS
-@section Main options
+@c man end DESCRIPTION
-@table @option
-@item -L
-Show license.
+@chapter Options
+@c man begin OPTIONS
-@item -h
-Show help.
+@include fftools-common-opts.texi
-@item -version
-Show version.
+@section Main options
-@item -formats
-Show available formats, codecs, protocols, ...
+@table @option
@item -f @var{fmt}
Force format.
Specifying a positive offset means that the corresponding
streams are delayed by 'offset' seconds.
-@item -title @var{string}
-Set the title.
-
@item -timestamp @var{time}
-Set the timestamp.
-
-@item -author @var{string}
-Set the author.
-
-@item -copyright @var{string}
-Set the copyright.
-
-@item -comment @var{string}
-Set the comment.
-
-@item -album @var{string}
-Set the album.
+Set the recording timestamp in the container.
+The syntax for @var{time} is:
+@example
+now|([(YYYY-MM-DD|YYYYMMDD)[T|t| ]]((HH[:MM[:SS[.m...]]])|(HH[MM[SS[.m...]]]))[Z|z])
+@end example
+If the value is "now" it takes the current time.
+Time is local time unless 'Z' or 'z' is appended, in which case it is
+interpreted as UTC.
+If the year-month-day part is not specified it takes the current
+year-month-day.
-@item -track @var{number}
-Set the track.
+@item -metadata @var{key}=@var{value}
+Set a metadata key/value pair.
-@item -year @var{number}
-Set the year.
+For example, for setting the title in the output file:
+@example
+ffmpeg -i in.avi -metadata title="my title" out.flv
+@end example
@item -v @var{number}
Set the logging verbosity level.
352x288
@item 4cif
704x576
+@item 16cif
+1408x1152
@item qqvga
160x120
@item qvga
@item -aspect @var{aspect}
Set aspect ratio (4:3, 16:9 or 1.3333, 1.7777).
@item -croptop @var{size}
-Set top crop band size (in pixels).
@item -cropbottom @var{size}
-Set bottom crop band size (in pixels).
@item -cropleft @var{size}
-Set left crop band size (in pixels).
@item -cropright @var{size}
-Set right crop band size (in pixels).
+All the crop options have been removed. Use -vf
+crop=width:height:x:y instead.
+
@item -padtop @var{size}
-Set top pad band size (in pixels).
@item -padbottom @var{size}
-Set bottom pad band size (in pixels).
@item -padleft @var{size}
-Set left pad band size (in pixels).
@item -padright @var{size}
-Set right pad band size (in pixels).
@item -padcolor @var{hex_color}
-Set color of padded bands. The value for padcolor is expressed
-as a six digit hexadecimal number where the first two digits
-represent red, the middle two digits green and last two digits
-blue (default = 000000 (black)).
+All the pad options have been removed. Use -vf
+pad=width:height:x:y:color instead.
@item -vn
Disable video recording.
@item -bt @var{tolerance}
Use same video quality as source (implies VBR).
@item -pass @var{n}
-Select the pass number (1 or 2). It is useful to do two pass
-encoding. The statistics of the video are recorded in the first
-pass and the video is generated at the exact requested bitrate
-in the second pass.
+Select the pass number (1 or 2). It is used to do two-pass
+video encoding. The statistics of the video are recorded in the first
+pass into a log file (see also the option -passlogfile),
+and in the second pass that log file is used to generate the video
+at the exact requested bitrate.
On pass 1, you may just deactivate audio and set output to null,
examples for Windows and Unix:
@example
ffmpeg -i foo.mov -vcodec libxvid -pass 1 -an -f rawvideo -y /dev/null
@end example
-@item -passlogfile @var{file}
-Set two pass logfile name to @var{file}.
+@item -passlogfile @var{prefix}
+Set two-pass log file name prefix to @var{prefix}, the default file name
+prefix is ``ffmpeg2pass''. The complete file name will be
+@file{PREFIX-N.log}, where N is a number specific to the output
+stream.
@item -newvideo
Add a new video stream to the current output stream.
+@item -vlang @var{code}
+Set the ISO 639 language code (3 letters) of the current video stream.
+
+@item -vf @var{filter_graph}
+@var{filter_graph} is a description of the filter graph to apply to
+the input video.
+Use the option "-filters" to show all the available filters (including
+also sources and sinks).
+
@end table
@section Advanced Video Options
Set pixel format. Use 'list' as parameter to show all the supported
pixel formats.
@item -sws_flags @var{flags}
-Set SwScaler flags (only available when compiled with swscale support).
+Set SwScaler flags.
@item -g @var{gop_size}
Set the group of pictures size.
@item -intra
@item -i_qoffset @var{offset}
qp offset between P- and I-frames
@item -rc_eq @var{equation}
-Set rate control equation (@pxref{FFmpeg formula
-evaluator}) (default = @code{tex^qComp}).
+Set rate control equation (see section "Expression Evaluation")
+(default = @code{tex^qComp}).
+
+When computing the rate control equation expression, besides the
+standard functions defined in the section "Expression Evaluation", the
+following functions are available:
+@table @var
+@item bits2qp(bits)
+@item qp2bits(qp)
+@end table
+
+and the following constants are available:
+@table @var
+@item iTex
+@item pTex
+@item tex
+@item mv
+@item fCode
+@item iCount
+@item mcVar
+@item var
+@item isI
+@item isP
+@item isB
+@item avgQP
+@item qComp
+@item avgIITex
+@item avgPITex
+@item avgPPTex
+@item avgBPTex
+@item avgTex
+@end table
+
@item -rc_override @var{override}
rate control override for specific intervals
@item -me_method @var{method}
Dump video coding statistics to @file{vstats_HHMMSS.log}.
@item -vstats_file @var{file}
Dump video coding statistics to @var{file}.
-@item -vhook @var{module}
-Insert video processing @var{module}. @var{module} contains the module
-name and its parameters separated by spaces.
@item -top @var{n}
top=1/bottom=0/auto=-1 field first
@item -dc @var{precision}
@item -qphist
Show QP histogram.
@item -vbsf @var{bitstream_filter}
-Bitstream filters available are "dump_extra", "remove_extra", "noise", "h264_mp4toannexb", "imxdump", "mjpegadump".
+Bitstream filters available are "dump_extra", "remove_extra", "noise", "h264_mp4toannexb", "imxdump", "mjpegadump", "mjpeg2jpeg".
@example
ffmpeg -i h264.mp4 -vcodec copy -vbsf h264_mp4toannexb -an out.h264
@end example
+@item -force_key_frames @var{time}[,@var{time}...]
+Force key frames at the specified timestamps, more precisely at the first
+frames after each specified time.
+This option can be useful to ensure that a seek point is present at a
+chapter mark or any other designated place in the output file.
+The timestamps must be specified in ascending order.
@end table
@section Audio Options
Set the audio sampling frequency (default = 44100 Hz).
@item -ab @var{bitrate}
Set the audio bitrate in bit/s (default = 64k).
+@item -aq @var{q}
+Set the audio quality (codec-specific, VBR).
@item -ac @var{channels}
-Set the number of audio channels (default = 1).
+Set the number of audio channels. For input streams it is set by
+default to 1, for output streams it is set by default to the same
+number of audio channels in input. If the input file has audio streams
+with different channel count, the behaviour is undefined.
@item -an
Disable audio recording.
@item -acodec @var{codec}
Add a new subtitle stream to the current output stream.
@item -slang @var{code}
Set the ISO 639 language code (3 letters) of the current subtitle stream.
+@item -sn
+Disable subtitle recording.
@item -sbsf @var{bitstream_filter}
Bitstream filters available are "mov2textsub", "text2movsub".
@example
Just enumerate the input streams in the order you want them in the output.
@var{sync_stream_id} if specified sets the input stream to sync
against.
-@item -map_meta_data @var{outfile}:@var{infile}
-Set meta data information of @var{outfile} from @var{infile}.
+@item -map_meta_data @var{outfile}[,@var{metadata}]:@var{infile}[,@var{metadata}]
+Set meta data information of @var{outfile} from @var{infile}. Note that those
+are file indices (zero-based), not filenames.
+Optional @var{metadata} parameters specify, which metadata to copy - (g)lobal
+(i.e. metadata that applies to the whole file), per-(s)tream, per-(c)hapter or
+per-(p)rogram. All metadata specifiers other than global must be followed by the
+stream/chapter/program number. If metadata specifier is omitted, it defaults to
+global.
+For example to copy metadata from the first stream of the input file to global metadata
+of the output file:
+@example
+ffmpeg -i in.ogg -map_meta_data 0:0,s0 out.mp3
+@end example
+@item -map_chapters @var{outfile}:@var{infile}
+Copy chapters from @var{infile} to @var{outfile}. If no chapter mapping is specified,
+then chapters are copied from the first input file with at least one chapter to all
+output files. Use a negative file index to disable any chapter copying.
@item -debug
Print specific debug info.
@item -benchmark
-Add timings for benchmarking.
+Show benchmarking information at the end of an encode.
+Shows CPU time used and maximum memory consumption.
+Maximum memory consumption is not supported on all systems,
+it will usually display as 0 if not supported.
@item -dump
Dump each input packet.
@item -hex
@item -bitexact
Only use bit exact algorithms (for codec testing).
@item -ps @var{size}
-Set packet size in bits.
+Set RTP payload size in bytes.
@item -re
Read input at native frame rate. Mainly used to simulate a grab device.
@item -loop_input
@item -threads @var{count}
Thread count.
@item -vsync @var{parameter}
-Video sync method. Video will be stretched/squeezed to match the timestamps,
-it is done by duplicating and dropping frames. With -map you can select from
+Video sync method.
+0 Each frame is passed with its timestamp from the demuxer to the muxer
+1 Frames will be duplicated and dropped to achieve exactly the requested
+ constant framerate.
+2 Frames are passed through with their timestamp or dropped so as to prevent
+ 2 frames from having the same timestamp
+-1 Chooses between 1 and 2 depending on muxer capabilities. This is the default method.
+
+With -map you can select from
which stream the timestamps should be taken. You can leave either video or
audio unchanged and sync the remaining stream(s) to the unchanged one.
@item -async @var{samples_per_second}
Set the maximum demux-decode delay.
@item -muxpreload @var{seconds}
Set the initial demux-decode delay.
-@end table
-
-@node FFmpeg formula evaluator
-@section FFmpeg formula evaluator
-
-When evaluating a rate control string, FFmpeg uses an internal formula
-evaluator.
-
-The following binary operators are available: @code{+}, @code{-},
-@code{*}, @code{/}, @code{^}.
-
-The following unary operators are available: @code{+}, @code{-},
-@code{(...)}.
+@item -streamid @var{output-stream-index}:@var{new-value}
+Assign a new value to a stream's stream-id field in the next output file.
+All stream-id fields are reset to default for each output file.
-The following functions are available:
-@table @var
-@item sinh(x)
-@item cosh(x)
-@item tanh(x)
-@item sin(x)
-@item cos(x)
-@item tan(x)
-@item exp(x)
-@item log(x)
-@item squish(x)
-@item gauss(x)
-@item abs(x)
-@item max(x, y)
-@item min(x, y)
-@item gt(x, y)
-@item lt(x, y)
-@item eq(x, y)
-@item bits2qp(bits)
-@item qp2bits(qp)
-@end table
-
-The following constants are available:
-@table @var
-@item PI
-@item E
-@item iTex
-@item pTex
-@item tex
-@item mv
-@item fCode
-@item iCount
-@item mcVar
-@item var
-@item isI
-@item isP
-@item isB
-@item avgQP
-@item qComp
-@item avgIITex
-@item avgPITex
-@item avgPPTex
-@item avgBPTex
-@item avgTex
+For example, to set the stream 0 PID to 33 and the stream 1 PID to 36 for
+an output mpegts file:
+@example
+ffmpeg -i infile -streamid 0:33 -streamid 1:36 out.ts
+@end example
@end table
+@section Preset files
+
+A preset file contains a sequence of @var{option}=@var{value} pairs,
+one for each line, specifying a sequence of options which would be
+awkward to specify on the command line. Lines starting with the hash
+('#') character are ignored and are used to provide comments. Check
+the @file{ffpresets} directory in the FFmpeg source tree for examples.
+
+Preset files are specified with the @code{vpre}, @code{apre},
+@code{spre}, and @code{fpre} options. The @code{fpre} option takes the
+filename of the preset instead of a preset name as input and can be
+used for any kind of codec. For the @code{vpre}, @code{apre}, and
+@code{spre} options, the options specified in a preset file are
+applied to the currently selected codec of the same type as the preset
+option.
+
+The argument passed to the @code{vpre}, @code{apre}, and @code{spre}
+preset options identifies the preset file to use according to the
+following rules:
+
+First ffmpeg searches for a file named @var{arg}.ffpreset in the
+directories @file{$FFMPEG_DATADIR} (if set), and @file{$HOME/.ffmpeg}, and in
+the datadir defined at configuration time (usually @file{PREFIX/share/ffmpeg})
+in that order. For example, if the argument is @code{libx264-max}, it will
+search for the file @file{libx264-max.ffpreset}.
+
+If no such file is found, then ffmpeg will search for a file named
+@var{codec_name}-@var{arg}.ffpreset in the above-mentioned
+directories, where @var{codec_name} is the name of the codec to which
+the preset file options will be applied. For example, if you select
+the video codec with @code{-vcodec libx264} and use @code{-vpre max},
+then it will search for the file @file{libx264-max.ffpreset}.
@c man end
-@ignore
-
-@setfilename ffmpeg
-@settitle FFmpeg video converter
-
-@c man begin SEEALSO
-ffserver(1), ffplay(1) and the HTML documentation of @file{ffmpeg}.
-@c man end
-
-@c man begin AUTHOR
-Fabrice Bellard
-@c man end
-
-@end ignore
-
-@section Protocols
-
-The file name can be @file{-} to read from standard input or to write
-to standard output.
-
-FFmpeg also handles many protocols specified with an URL syntax.
-
-Use 'ffmpeg -formats' to see a list of the supported protocols.
-
-The protocol @code{http:} is currently used only to communicate with
-FFserver (see the FFserver documentation). When FFmpeg will be a
-video player it will also be used for streaming :-)
-
@chapter Tips
+@c man begin TIPS
@itemize
-@item For streaming at very low bitrate application, use a low frame rate
+@item
+For streaming at very low bitrate application, use a low frame rate
and a small GOP size. This is especially true for RealVideo where
the Linux player does not seem to be very fast, so it can miss
frames. An example is:
ffmpeg -g 3 -r 3 -t 10 -b 50k -s qcif -f rv10 /tmp/b.rm
@end example
-@item The parameter 'q' which is displayed while encoding is the current
+@item
+The parameter 'q' which is displayed while encoding is the current
quantizer. The value 1 indicates that a very good quality could
be achieved. The value 31 indicates the worst quality. If q=31 appears
too often, it means that the encoder cannot compress enough to meet
your bitrate. You must either increase the bitrate, decrease the
frame rate or decrease the frame size.
-@item If your computer is not fast enough, you can speed up the
+@item
+If your computer is not fast enough, you can speed up the
compression at the expense of the compression ratio. You can use
'-me zero' to speed up motion estimation, and '-intra' to disable
motion estimation completely (you have only I-frames, which means it
is about as good as JPEG compression).
-@item To have very low audio bitrates, reduce the sampling frequency
-(down to 22050 kHz for MPEG audio, 22050 or 11025 for AC3).
+@item
+To have very low audio bitrates, reduce the sampling frequency
+(down to 22050 Hz for MPEG audio, 22050 or 11025 for AC-3).
-@item To have a constant quality (but a variable bitrate), use the option
+@item
+To have a constant quality (but a variable bitrate), use the option
'-qscale n' when 'n' is between 1 (excellent quality) and 31 (worst
quality).
-@item When converting video files, you can use the '-sameq' option which
+@item
+When converting video files, you can use the '-sameq' option which
uses the same quality factor in the encoder as in the decoder.
It allows almost lossless encoding.
@end itemize
+@c man end TIPS
+
+@chapter Examples
+@c man begin EXAMPLES
+
+@section Video and Audio grabbing
+
+FFmpeg can grab video and audio from devices given that you specify the input
+format and device.
+
+@example
+ffmpeg -f oss -i /dev/dsp -f video4linux2 -i /dev/video0 /tmp/out.mpg
+@end example
+
+Note that you must activate the right video source and channel before
+launching FFmpeg with any TV viewer such as xawtv
+(@url{http://linux.bytesex.org/xawtv/}) by Gerd Knorr. You also
+have to set the audio recording levels correctly with a
+standard mixer.
+
+@section X11 grabbing
+
+FFmpeg can grab the X11 display.
+
+@example
+ffmpeg -f x11grab -s cif -r 25 -i :0.0 /tmp/out.mpg
+@end example
+
+0.0 is display.screen number of your X11 server, same as
+the DISPLAY environment variable.
+
+@example
+ffmpeg -f x11grab -s cif -r 25 -i :0.0+10,20 /tmp/out.mpg
+@end example
+
+0.0 is display.screen number of your X11 server, same as the DISPLAY environment
+variable. 10 is the x-offset and 20 the y-offset for the grabbing.
+
+@section Video and Audio file format conversion
+
+* FFmpeg can use any supported file format and protocol as input:
+
+Examples:
+
+* You can use YUV files as input:
+
+@example
+ffmpeg -i /tmp/test%d.Y /tmp/out.mpg
+@end example
+
+It will use the files:
+@example
+/tmp/test0.Y, /tmp/test0.U, /tmp/test0.V,
+/tmp/test1.Y, /tmp/test1.U, /tmp/test1.V, etc...
+@end example
+
+The Y files use twice the resolution of the U and V files. They are
+raw files, without header. They can be generated by all decent video
+decoders. You must specify the size of the image with the @option{-s} option
+if FFmpeg cannot guess it.
+
+* You can input from a raw YUV420P file:
+
+@example
+ffmpeg -i /tmp/test.yuv /tmp/out.avi
+@end example
+
+test.yuv is a file containing raw YUV planar data. Each frame is composed
+of the Y plane followed by the U and V planes at half vertical and
+horizontal resolution.
+
+* You can output to a raw YUV420P file:
+
+@example
+ffmpeg -i mydivx.avi hugefile.yuv
+@end example
+
+* You can set several input files and output files:
+
+@example
+ffmpeg -i /tmp/a.wav -s 640x480 -i /tmp/a.yuv /tmp/a.mpg
+@end example
+
+Converts the audio file a.wav and the raw YUV video file a.yuv
+to MPEG file a.mpg.
+
+* You can also do audio and video conversions at the same time:
+
+@example
+ffmpeg -i /tmp/a.wav -ar 22050 /tmp/a.mp2
+@end example
+
+Converts a.wav to MPEG audio at 22050 Hz sample rate.
+
+* You can encode to several formats at the same time and define a
+mapping from input stream to output streams:
+
+@example
+ffmpeg -i /tmp/a.wav -ab 64k /tmp/a.mp2 -ab 128k /tmp/b.mp2 -map 0:0 -map 0:0
+@end example
+
+Converts a.wav to a.mp2 at 64 kbits and to b.mp2 at 128 kbits. '-map
+file:index' specifies which input stream is used for each output
+stream, in the order of the definition of output streams.
+
+* You can transcode decrypted VOBs:
+
+@example
+ffmpeg -i snatch_1.vob -f avi -vcodec mpeg4 -b 800k -g 300 -bf 2 -acodec libmp3lame -ab 128k snatch.avi
+@end example
+
+This is a typical DVD ripping example; the input is a VOB file, the
+output an AVI file with MPEG-4 video and MP3 audio. Note that in this
+command we use B-frames so the MPEG-4 stream is DivX5 compatible, and
+GOP size is 300 which means one intra frame every 10 seconds for 29.97fps
+input video. Furthermore, the audio stream is MP3-encoded so you need
+to enable LAME support by passing @code{--enable-libmp3lame} to configure.
+The mapping is particularly useful for DVD transcoding
+to get the desired audio language.
+
+NOTE: To see the supported input formats, use @code{ffmpeg -formats}.
+
+* You can extract images from a video, or create a video from many images:
+
+For extracting images from a video:
+@example
+ffmpeg -i foo.avi -r 1 -s WxH -f image2 foo-%03d.jpeg
+@end example
+
+This will extract one video frame per second from the video and will
+output them in files named @file{foo-001.jpeg}, @file{foo-002.jpeg},
+etc. Images will be rescaled to fit the new WxH values.
+
+If you want to extract just a limited number of frames, you can use the
+above command in combination with the -vframes or -t option, or in
+combination with -ss to start extracting from a certain point in time.
+
+For creating a video from many images:
+@example
+ffmpeg -f image2 -i foo-%03d.jpeg -r 12 -s WxH foo.avi
+@end example
+
+The syntax @code{foo-%03d.jpeg} specifies to use a decimal number
+composed of three digits padded with zeroes to express the sequence
+number. It is the same syntax supported by the C printf function, but
+only formats accepting a normal integer are suitable.
+
+* You can put many streams of the same type in the output:
+
+@example
+ffmpeg -i test1.avi -i test2.avi -vcodec copy -acodec copy -vcodec copy -acodec copy test12.avi -newvideo -newaudio
+@end example
+
+In addition to the first video and audio streams, the resulting
+output file @file{test12.avi} will contain the second video
+and the second audio stream found in the input streams list.
+
+The @code{-newvideo}, @code{-newaudio} and @code{-newsubtitle}
+options have to be specified immediately after the name of the output
+file to which you want to add them.
+@c man end EXAMPLES
+
+@include eval.texi
+@include indevs.texi
+@include outdevs.texi
+@include protocols.texi
+@include bitstream_filters.texi
+@include filters.texi
+
+@ignore
+
+@setfilename ffmpeg
+@settitle FFmpeg video converter
+
+@c man begin SEEALSO
+ffplay(1), ffprobe(1), ffserver(1) and the FFmpeg HTML documentation
+@c man end
+
+@c man begin AUTHORS
+The FFmpeg developers
+@c man end
+
+@end ignore
@bye
projects / ffmpeg / blobdiff