ffmpeg -i myfile.avi -target vcd -bf 2 /tmp/vcd.mpg
@end example
+The parameters set for each target are as follows.
+
+@strong{VCD}
+@example
+@var{pal}:
+-f vcd -muxrate 1411200 -muxpreload 0.44 -packetsize 2324
+-s 352x288 -r 25
+-codec:v mpeg1video -g 15 -b:v 1150k -maxrate:v 1150v -minrate:v 1150k -bufsize:v 327680
+-ar 44100 -ac 2
+-codec:a mp2 -b:a 224k
+
+@var{ntsc}:
+-f vcd -muxrate 1411200 -muxpreload 0.44 -packetsize 2324
+-s 352x240 -r 30000/1001
+-codec:v mpeg1video -g 18 -b:v 1150k -maxrate:v 1150v -minrate:v 1150k -bufsize:v 327680
+-ar 44100 -ac 2
+-codec:a mp2 -b:a 224k
+
+@var{film}:
+-f vcd -muxrate 1411200 -muxpreload 0.44 -packetsize 2324
+-s 352x240 -r 24000/1001
+-codec:v mpeg1video -g 18 -b:v 1150k -maxrate:v 1150v -minrate:v 1150k -bufsize:v 327680
+-ar 44100 -ac 2
+-codec:a mp2 -b:a 224k
+@end example
+
+@strong{SVCD}
+@example
+@var{pal}:
+-f svcd -packetsize 2324
+-s 480x576 -pix_fmt yuv420p -r 25
+-codec:v mpeg2video -g 15 -b:v 2040k -maxrate:v 2516k -minrate:v 0 -bufsize:v 1835008 -scan_offset 1
+-ar 44100
+-codec:a mp2 -b:a 224k
+
+@var{ntsc}:
+-f svcd -packetsize 2324
+-s 480x480 -pix_fmt yuv420p -r 30000/1001
+-codec:v mpeg2video -g 18 -b:v 2040k -maxrate:v 2516k -minrate:v 0 -bufsize:v 1835008 -scan_offset 1
+-ar 44100
+-codec:a mp2 -b:a 224k
+
+@var{film}:
+-f svcd -packetsize 2324
+-s 480x480 -pix_fmt yuv420p -r 24000/1001
+-codec:v mpeg2video -g 18 -b:v 2040k -maxrate:v 2516k -minrate:v 0 -bufsize:v 1835008 -scan_offset 1
+-ar 44100
+-codec:a mp2 -b:a 224k
+@end example
+
+@strong{DVD}
+@example
+@var{pal}:
+-f dvd -muxrate 10080k -packetsize 2048
+-s 720x576 -pix_fmt yuv420p -r 25
+-codec:v mpeg2video -g 15 -b:v 6000k -maxrate:v 9000k -minrate:v 0 -bufsize:v 1835008
+-ar 48000
+-codec:a ac3 -b:a 448k
+
+@var{ntsc}:
+-f dvd -muxrate 10080k -packetsize 2048
+-s 720x480 -pix_fmt yuv420p -r 30000/1001
+-codec:v mpeg2video -g 18 -b:v 6000k -maxrate:v 9000k -minrate:v 0 -bufsize:v 1835008
+-ar 48000
+-codec:a ac3 -b:a 448k
+
+@var{film}:
+-f dvd -muxrate 10080k -packetsize 2048
+-s 720x480 -pix_fmt yuv420p -r 24000/1001
+-codec:v mpeg2video -g 18 -b:v 6000k -maxrate:v 9000k -minrate:v 0 -bufsize:v 1835008
+-ar 48000
+-codec:a ac3 -b:a 448k
+@end example
+
+@strong{DV}
+@example
+@var{pal}:
+-f dv
+-s 720x576 -pix_fmt yuv420p -r 25
+-ar 48000 -ac 2
+
+@var{ntsc}:
+-f dv
+-s 720x480 -pix_fmt yuv411p -r 30000/1001
+-ar 48000 -ac 2
+
+@var{film}:
+-f dv
+-s 720x480 -pix_fmt yuv411p -r 24000/1001
+-ar 48000 -ac 2
+@end example
+The @code{dv50} target is identical to the @code{dv} target except that the pixel format set is @code{yuv422p} for all three standards.
+
+Any user-set value for a parameter above will override the target preset value. In that case, the output may
+not comply with the target standard.
+
@item -dn (@emph{input/output})
As an input option, blocks all data streams of a file from being filtered or
being automatically selected or mapped for any output. See @code{-discard}
Print encoding progress/statistics. It is on by default, to explicitly
disable it you need to specify @code{-nostats}.
+@item -stats_period @var{time} (@emph{global})
+Set period at which encoding progress/statistics are updated. Default is 0.5 seconds.
+
@item -progress @var{url} (@emph{global})
Send program-friendly progress information to @var{url}.
-Progress information is written approximately every second and at the end of
+Progress information is written periodically and at the end of
the encoding process. It is made of "@var{key}=@var{value}" lines. @var{key}
consists of only alphanumeric characters. The last key of a sequence of
progress information is always "progress".
+The update period is set using @code{-stats_period}.
+
@anchor{stdin option}
@item -stdin
Enable interaction on standard input. On by default unless standard input is
As an output option, duplicate or drop input frames to achieve constant output
frame rate @var{fps}.
+@item -fpsmax[:@var{stream_specifier}] @var{fps} (@emph{output,per-stream})
+Set maximum frame rate (Hz value, fraction or abbreviation).
+
+Clamps output frame rate when output framerate is auto-set and is higher than this value.
+Useful in batch processing or when input framerate is wrongly detected as very high.
+It cannot be set together with @code{-r}. It is ignored during streamcopy.
+
@item -s[:@var{stream_specifier}] @var{size} (@emph{input/output,per-stream})
Set frame size.
were called immediately before.
@item -hwaccels
-List all hardware acceleration methods supported in this build of ffmpeg.
+List all hardware acceleration components enabled in this build of ffmpeg.
+Actual runtime availability depends on the hardware and its suitable driver
+being installed.
@end table
This option has been deprecated. Use the @code{aresample} audio filter instead.
+@item -adrift_threshold @var{time}
+Set the minimum difference between timestamps and audio data (in seconds) to trigger
+adding/dropping samples to make it match the timestamps. This option effectively is
+a threshold to select between hard (add/drop) and soft (squeeze/stretch) compensation.
+@code{-async} must be set to a positive value.
+
+@item -apad @var{parameters} (@emph{output,per-stream})
+Pad the output audio stream(s). This is the same as applying @code{-af apad}.
+Argument is a string of filter parameters composed the same as with the @code{apad} filter.
+@code{-shortest} must be set for this output for the option to take effect.
+
@item -copyts
Do not process input timestamps, but keep their values without trying
to sanitize them. In particular, do not remove the initial start time
ffmpeg -i video.mkv -i image.png -filter_complex 'overlay' out.mkv
@end example
+As a special exception, you can use a bitmap subtitle stream as input: it
+will be converted into a video with the same size as the largest video in
+the file, or 720x576 if no video is present. Note that this is an
+experimental and temporary solution. It will be removed once libavfilter has
+proper support for subtitles.
+
+For example, to hardcode subtitles on top of a DVB-T recording stored in
+MPEG-TS format, delaying the subtitles by 1 second:
+@example
+ffmpeg -i input.ts -filter_complex \
+ '[#0x2ef] setpts=PTS+1/TB [sub] ; [#0x2d0] [sub] overlay' \
+ -sn -map '#0x2dc' output.mkv
+@end example
+(0x2d0, 0x2dc and 0x2ef are the MPEG-TS PIDs of respectively the video,
+audio and subtitles streams; 0:0, 0:3 and 0:7 would have worked too)
+
To generate 5 seconds of pure red video using lavfi @code{color} source:
@example
ffmpeg -filter_complex 'color=c=red' -t 5 out.mkv
No packets were passed to the muxer in some of the output streams.
@end table
+@item -max_error_rate (@emph{global})
+Set fraction of decoding frame failures across all inputs which when crossed
+ffmpeg will return exit code 69. Crossing this threshold does not terminate
+processing. Range is a floating-point number between 0 to 1. Default is 2/3.
+
@item -xerror (@emph{global})
Stop and exit on error
@end table
-As a special exception, you can use a bitmap subtitle stream as input: it
-will be converted into a video with the same size as the largest video in
-the file, or 720x576 if no video is present. Note that this is an
-experimental and temporary solution. It will be removed once libavfilter has
-proper support for subtitles.
-
-For example, to hardcode subtitles on top of a DVB-T recording stored in
-MPEG-TS format, delaying the subtitles by 1 second:
-@example
-ffmpeg -i input.ts -filter_complex \
- '[#0x2ef] setpts=PTS+1/TB [sub] ; [#0x2d0] [sub] overlay' \
- -sn -map '#0x2dc' output.mkv
-@end example
-(0x2d0, 0x2dc and 0x2ef are the MPEG-TS PIDs of respectively the video,
-audio and subtitles streams; 0:0, 0:3 and 0:7 would have worked too)
-
@section Preset files
A preset file contains a sequence of @var{option}=@var{value} pairs,
one for each line, specifying a sequence of options which would be
projects / ffmpeg / blobdiff