smaller than number of channels all remaining channels will not be delayed.
If you want to delay exact number of samples, append 'S' to number.
If you want instead to delay in seconds, append 's' to number.
+
+@item all
+Use last set delay for all remaining channels. By default is disabled.
+This option if enabled changes how option @code{delays} is interpreted.
@end table
@subsection Examples
@example
adelay=0|500S|700S
@end example
+
+@item
+Delay all channels by same number of samples:
+@example
+adelay=delays=64S:all=1
+@end example
@end itemize
@section aderivative, aintegral
@example
afftfilt="'real=re * (1-clip((b/nb)*b,0,1))':imag='im * (1-clip((b/nb)*b,0,1))'"
@end example
+
+@item
+Apply robotize effect:
+@example
+afftfilt="real='hypot(re,im)*sin(0)':imag='hypot(re,im)*cos(0)':win_size=512:overlap=0.75"
+@end example
+
+@item
+Apply whisper effect:
+@example
+afftfilt="real='hypot(re,im)*cos((random(0)*2-1)*2*3.14)':imag='hypot(re,im)*sin((random(1)*2-1)*2*3.14)':win_size=128:overlap=0.8"
+@end example
@end itemize
@anchor{afir}
Syntax for the command is : "i", "o" or "n" string.
@end table
+@section anlms
+Apply Normalized Least-Mean-Squares algorithm to the first audio stream using the second audio stream.
+
+This adaptive filter is used to mimic a desired filter by finding the filter coefficients that
+relate to producing the least mean square of the error signal (difference between the desired,
+2nd input audio stream and the actual signal, the 1st input audio stream).
+
+A description of the accepted options follows.
+
+@table @option
+@item order
+Set filter order.
+
+@item mu
+Set filter mu.
+
+@item eps
+Set the filter eps.
+
+@item leakage
+Set the filter leakage.
+
+@item out_mode
+It accepts the following values:
+@table @option
+@item i
+Pass the 1st input.
+
+@item d
+Pass the 2nd input.
+
+@item o
+Pass filtered samples.
+
+@item n
+Pass difference between desired and filtered samples.
+
+Default value is @var{o}.
+@end table
+@end table
+
+@subsection Examples
+
+@itemize
+@item
+One of many usages of this filter is noise reduction, input audio is filtered
+with same samples that are delayed by fixed amount, one such example for stereo audio is:
+@example
+asplit[a][b],[a]adelay=32S|32S[a],[b][a]anlms=order=128:leakage=0.0005:mu=.5:out_mode=o
+@end example
+@end itemize
+
+@subsection Commands
+
+This filter supports the same commands as options, excluding option @code{order}.
+
@section anull
Pass the audio source unchanged to the output.
@end example
@end itemize
+@subsection Commands
+
+This filter supports the following commands:
+@table @option
+@item tempo
+Change filter tempo scale factor.
+Syntax for the command is : "@var{tempo}"
+@end table
+
@section atrim
Trim the input so that the output contains one continuous subpart of the input.
@end table
@end table
+@subsection Commands
+
+This filter supports the following commands:
+@table @option
+@item tempo
+Change filter tempo scale factor.
+Syntax for the command is : "@var{tempo}"
+
+@item pitch
+Change filter pitch scale factor.
+Syntax for the command is : "@var{pitch}"
+@end table
+
@section sidechaincompress
This filter acts like normal compressor but has the ability to compress
Default is @code{0}.
@end table
+@subsection Commands
+This filter supports same commands as options.
+The command accepts the same syntax of the corresponding option.
+
+If the specified expression is not valid, it is kept at its current
+value.
+
@section bbox
Compute the bounding box for the non-black pixels in the input frame
@end example
@end itemize
+@subsection Commands
+This filter supports same commands as options.
+The command accepts the same syntax of the corresponding option.
+
+If the specified expression is not valid, it is kept at its current
+value.
+
@section drawgrid
Draw a grid on the input image.
@end example
@end itemize
+@subsection Commands
+This filter supports same commands as options.
+The command accepts the same syntax of the corresponding option.
+
+If the specified expression is not valid, it is kept at its current
+value.
+
@anchor{drawtext}
@section drawtext
Default is @code{-1}.
@end table
+@subsection Commands
+This filter supports same commands as options.
+The command accepts the same syntax of the corresponding option.
+
+If the specified expression is not valid, it is kept at its current
+value.
+
@section geq
Apply generic equation to each pixel.
@end table
@end table
+@section photosensitivity
+Reduce various flashes in video, so to help users with epilepsy.
+
+It accepts the following options:
+@table @option
+@item frames, f
+Set how many frames to use when filtering. Default is 30.
+
+@item threshold, t
+Set detection threshold factor. Default is 1.
+Lower is stricter.
+
+@item skip
+Set how many pixels to skip when sampling frames. Defalt is 1.
+Allowed range is from 1 to 1024.
+
+@item bypass
+Leave frames unchanged. Default is disabled.
+@end table
+
@section pixdesctest
Pixel format descriptor test filter, mainly useful for internal
@end example
@end itemize
+@section scroll
+Scroll input video horizontally and/or vertically by constant speed.
+
+The filter accepts the following options:
+@table @option
+@item horizontal, h
+Set the horizontal scrolling speed. Default is 0. Allowed range is from -1 to 1.
+Negative values changes scrolling direction.
+
+@item vertical, v
+Set the vertical scrolling speed. Default is 0. Allowed range is from -1 to 1.
+Negative values changes scrolling direction.
+
+@item hpos
+Set the initial horizontal scrolling position. Default is 0. Allowed range is from 0 to 1.
+
+@item vpos
+Set the initial vertical scrolling position. Default is 0. Allowed range is from 0 to 1.
+@end table
+
@anchor{selectivecolor}
@section selectivecolor
@item xflat
Similar as above, but use different colors.
+@item yflat
+Similar as above, but again with different colors.
+
@item chroma
Displays only chroma.
@item orange
Display orange graticule showing legal broadcast ranges.
+
+@item invert
+Display invert graticule showing legal broadcast ranges.
@end table
@item opacity, o
@section sierpinski
-Generate a Sierpinksi carpet fractal, and randomly pan around.
+Generate a Sierpinski carpet/triangle fractal, and randomly pan around.
This source accepts the following options:
@item jump
Set max jump for single pan destination. Allowed range is from 1 to 10000.
+
+@item type
+Set fractal type, can be default @code{carpet} or @code{triangle}.
@end table
@c man end VIDEO SOURCES
scope.
The filter is used to measure the difference between channels of stereo
-audio stream. A monoaural signal, consisting of identical left and right
+audio stream. A monaural signal, consisting of identical left and right
signal, results in straight vertical line. Any stereo separation is visible
as a deviation from this line, creating a Lissajous figure.
If the straight (or deviation from it) but horizontal line appears this
@item expr
Values are interpreted as floats, returns true if expression from option @code{expr}
evaluates to true.
+
+@item ends_with
+Values are interpreted as strings, returns true if metadata value ends with
+the @code{value} option string.
@end table
@item expr
@section spectrumsynth
-Sythesize audio from 2 input video spectrums, first input stream represents
+Synthesize audio from 2 input video spectrums, first input stream represents
magnitude across time and second represents phase across time.
The filter will transform from frequency domain as displayed in videos back
to time domain as presented in audio output.
projects / ffmpeg / blobdiff