The color to be used for drawing box around text.
Either a string (e.g. "yellow") or in 0xRRGGBB[AA] format
(e.g. "0xff00ff"), possibly followed by an alpha specifier.
-
-The default value of @var{bgcolor} is "white".
+The default value of @var{boxcolor} is "white".
@item box
Used to draw a box around text using background color.
Value should be either 1 (enable) or 0 (disable).
The default value of @var{box} is 0.
+@item shadowx, shadowy
+The x and y offsets for the text shadow position with respect to the
+position of the text. They can be either positive or negative
+values. Default value for both is "0".
+
+@item shadowcolor
+The color to be used for drawing a shadow behind the drawn text. It
+can be a color name (e.g. "yellow") or a string in the 0xRRGGBB[AA]
+form (e.g. "0xff00ff"), possibly followed by an alpha specifier.
+The default value of @var{shadowcolor} is "black".
+
@item ft_load_flags
Flags to be used for loading the fonts.
For example the command:
@example
-drawtext="fontfile=FreeSerif.ttf: text='Test Text': x=100: y=50: fontsize=24: fontcolor=yellow@@0.2: boxcolor=red@@0.2: box=1"
+drawtext="fontfile=/usr/share/fonts/truetype/freefont/FreeSerif.ttf: text='Test Text'"
+@end example
+
+will draw "Test Text" with font FreeSerif, using the default values
+for the optional parameters.
+
+The command:
+@example
+drawtext="fontfile=/usr/share/fonts/truetype/freefont/FreeSerif.ttf: text='Test Text':\
+ x=100: y=50: fontsize=24: fontcolor=yellow@@0.2: box=1: boxcolor=red@@0.2"
@end example
-will draw 'Test Text' with font FreeSerif of size 24 at position
-(100,50), text color is yellow, and draw a red box around text. Both
-the text and the box have an opacity of 20%.
+will draw 'Test Text' with font FreeSerif of size 24 at position x=100
+and y=50 (counting from the top-left corner of the screen), text is
+yellow with a red box around it. Both the text and the box have an
+opacity of 20%.
Note that the double quotes are not necessary if spaces are not used
within the parameter list.
Interpolate the gradients that should go where the bands are, and
dither them.
+This filter is designed for playback only. Do not use it prior to
+lossy compression, because compression tends to lose the dither and
+bring back the bands.
+
The filter takes two optional parameters, separated by ':':
@var{strength}:@var{radius}
The default value of @var{width} and @var{height} is 0.
+@anchor{setdar}
+@section setdar
+
+Set the Display Aspect Ratio for the filter output video.
+
+This is done by changing the specified Sample (aka Pixel) Aspect
+Ratio, according to the following equation:
+@math{DAR = HORIZONTAL_RESOLUTION / VERTICAL_RESOLUTION * SAR}
+
+Keep in mind that this filter does not modify the pixel dimensions of
+the video frame. Also the display aspect ratio set by this filter may
+be changed by later filters in the filterchain, e.g. in case of
+scaling or if another "setdar" or a "setsar" filter is applied.
+
+The filter accepts a parameter string which represents the wanted
+display aspect ratio.
+The parameter can be a floating point number string, or an expression
+of the form @var{num}:@var{den}, where @var{num} and @var{den} are the
+numerator and denominator of the aspect ratio.
+If the parameter is not specified, it is assumed the value "0:1".
+
+For example to change the display aspect ratio to 16:9, specify:
+@example
+setdar=16:9
+# the above is equivalent to
+setdar=1.77777
+@end example
+
+See also the "setsar" filter documentation (@pxref{setsar}).
+
@section setpts
Change the PTS (presentation timestamp) of the input video frames.
setpts='1/(25*TB) * (N + 0.05 * sin(N*2*PI/25))'
@end example
+@anchor{setsar}
+@section setsar
+
+Set the Sample (aka Pixel) Aspect Ratio for the filter output video.
+
+Note that as a consequence of the application of this filter, the
+output display aspect ratio will change according to the following
+equation:
+@math{DAR = HORIZONTAL_RESOLUTION / VERTICAL_RESOLUTION * SAR}
+
+Keep in mind that the sample aspect ratio set by this filter may be
+changed by later filters in the filterchain, e.g. if another "setsar"
+or a "setdar" filter is applied.
+
+The filter accepts a parameter string which represents the wanted
+sample aspect ratio.
+The parameter can be a floating point number string, or an expression
+of the form @var{num}:@var{den}, where @var{num} and @var{den} are the
+numerator and denominator of the aspect ratio.
+If the parameter is not specified, it is assumed the value "0:1".
+
+For example to change the sample aspect ratio to 10:11, specify:
+@example
+setsar=10:11
+@end example
+
@section settb
Set the timebase to use for the output frames timestamps.
projects / ffmpeg / blobdiff