Overall bit depth of audio. Number of bits used for each sample.
@end table
-@section astreamsync
-
-Forward two audio streams and control the order the buffers are forwarded.
-
-The filter accepts the following options:
-
-@table @option
-@item expr, e
-Set the expression deciding which stream should be
-forwarded next: if the result is negative, the first stream is forwarded; if
-the result is positive or zero, the second stream is forwarded. It can use
-the following variables:
-
-@table @var
-@item b1 b2
-number of buffers forwarded so far on each stream
-@item s1 s2
-number of samples forwarded so far on each stream
-@item t1 t2
-current timestamp of each stream
-@end table
-
-The default value is @code{t1-t2}, which means to always forward the stream
-that has a smaller timestamp.
-@end table
-
-@subsection Examples
-
-Stress-test @code{amerge} by randomly sending buffers on the wrong
-input, while avoiding too much of a desynchronization:
-@example
-amovie=file.ogg [a] ; amovie=file.mp3 [b] ;
-[a] [b] astreamsync=(2*random(1))-1+tanh(5*(t1-t2)) [a2] [b2] ;
-[a2] [b2] amerge
-@end example
-
@section asyncts
Synchronize audio data with timestamps by squeezing/stretching it and/or
For more information about libflite, check:
@url{http://www.speech.cs.cmu.edu/flite/}
+@section anoisesrc
+
+Generate a noise audio signal.
+
+The filter accepts the following options:
+
+@table @option
+@item sample_rate, r
+Specify the sample rate. Default value is 48000 Hz.
+
+@item amplitude, a
+Specify the amplitude (0.0 - 1.0) of the generated audio stream. Default value
+is 1.0.
+
+@item duration, d
+Specify the duration of the generated audio stream. Not specifying this option
+results in noise with an infinite length.
+
+@item color, colour, c
+Specify the color of noise. Available noise colors are white, pink, and brown.
+Default color is white.
+
+@item seed, s
+Specify a value used to seed the PRNG.
+
+@item nb_samples, n
+Set the number of samples per each output frame, default is 1024.
+@end table
+
+@subsection Examples
+
+@itemize
+
+@item
+Generate 60 seconds of pink noise, with a 44.1 kHz sampling rate and an amplitude of 0.5:
+@example
+anoisesrc=d=60:c=pink:r=44100:a=0.5
+@end example
+@end itemize
+
@section sine
Generate an audio signal made of a sine wave with amplitude 1/8.
following filter. Inserting a @ref{format} or @ref{aformat} filter before the
perms/aperms filter can avoid this problem.
+@section realtime, arealtime
+
+Slow down filtering to match real time approximatively.
+
+These filters will pause the filtering for a variable amount of time to
+match the output rate with the input timestamps.
+They are similar to the @option{re} option to @code{ffmpeg}.
+
+They accept the following options:
+
+@table @option
+@item limit
+Time limit for the pauses. Any pause longer than that will be considered
+a timestamp discontinuity and reset the timer. Default is 2 seconds.
+@end table
+
@section select, aselect
Select frames to pass in output.
@end itemize
@section showcqt
-Convert input audio to a video output representing
-frequency spectrum logarithmically (using constant Q transform with
-Brown-Puckette algorithm), with musical tone scale, from E0 to D#10 (10 octaves).
+Convert input audio to a video output representing frequency spectrum
+logarithmically using Brown-Puckette constant Q transform algorithm with
+direct frequency domain coefficient calculation (but the transform itself
+is not really constant Q, instead the Q factor is actually variable/clamped),
+with musical tone scale, from E0 to D#10.
The filter accepts the following options:
@table @option
-@item volume
-Specify transform volume (multiplier) expression. The expression can contain
-variables:
+@item size, s
+Specify the video size for the output. It must be even. For the syntax of this option,
+check the @ref{video size syntax,,"Video size" section in the ffmpeg-utils manual,ffmpeg-utils}.
+Default value is @code{1920x1080}.
+
+@item fps, rate, r
+Set the output frame rate. Default value is @code{25}.
+
+@item bar_h
+Set the bargraph height. It must be even. Default value is @code{-1} which
+computes the bargraph height automatically.
+
+@item axis_h
+Set the axis height. It must be even. Default value is @code{-1} which computes
+the axis height automatically.
+
+@item sono_h
+Set the sonogram height. It must be even. Default value is @code{-1} which
+computes the sonogram height automatically.
+
+@item fullhd
+Set the fullhd resolution. This option is deprecated, use @var{size}, @var{s}
+instead. Default value is @code{1}.
+
+@item sono_v, volume
+Specify the sonogram volume expression. It can contain variables:
@table @option
+@item bar_v
+the @var{bar_v} evaluated expression
@item frequency, freq, f
-the frequency where transform is evaluated
+the frequency where it is evaluated
@item timeclamp, tc
-value of timeclamp option
+the value of @var{timeclamp} option
@end table
and functions:
@table @option
@item b_weighting(f)
B-weighting of equal loudness
@item c_weighting(f)
-C-weighting of equal loudness
+C-weighting of equal loudness.
@end table
Default value is @code{16}.
-@item tlength
-Specify transform length expression. The expression can contain variables:
+@item bar_v, volume2
+Specify the bargraph volume expression. It can contain variables:
@table @option
+@item sono_v
+the @var{sono_v} evaluated expression
@item frequency, freq, f
-the frequency where transform is evaluated
+the frequency where it is evaluated
@item timeclamp, tc
-value of timeclamp option
+the value of @var{timeclamp} option
@end table
-Default value is @code{384/f*tc/(384/f+tc)}.
+and functions:
+@table @option
+@item a_weighting(f)
+A-weighting of equal loudness
+@item b_weighting(f)
+B-weighting of equal loudness
+@item c_weighting(f)
+C-weighting of equal loudness.
+@end table
+Default value is @code{sono_v}.
+
+@item sono_g, gamma
+Specify the sonogram gamma. Lower gamma makes the spectrum more contrast,
+higher gamma makes the spectrum having more range. Default value is @code{3}.
+Acceptable range is @code{[1, 7]}.
-@item timeclamp
+@item bar_g, gamma2
+Specify the bargraph gamma. Default value is @code{1}. Acceptable range is
+@code{[1, 7]}.
+
+@item timeclamp, tc
Specify the transform timeclamp. At low frequency, there is trade-off between
accuracy in time domain and frequency domain. If timeclamp is lower,
event in time domain is represented more accurately (such as fast bass drum),
otherwise event in frequency domain is represented more accurately
-(such as bass guitar). Acceptable value is [0.1, 1.0]. Default value is @code{0.17}.
+(such as bass guitar). Acceptable range is @code{[0.1, 1]}. Default value is @code{0.17}.
+
+@item basefreq
+Specify the transform base frequency. Default value is @code{20.01523126408007475},
+which is frequency 50 cents below E0. Acceptable range is @code{[10, 100000]}.
+
+@item endfreq
+Specify the transform end frequency. Default value is @code{20495.59681441799654},
+which is frequency 50 cents above D#10. Acceptable range is @code{[10, 100000]}.
@item coeffclamp
-Specify the transform coeffclamp. If coeffclamp is lower, transform is
-more accurate, otherwise transform is faster. Acceptable value is [0.1, 10.0].
-Default value is @code{1.0}.
+This option is deprecated and ignored.
-@item gamma
-Specify gamma. Lower gamma makes the spectrum more contrast, higher gamma
-makes the spectrum having more range. Acceptable value is [1.0, 7.0].
-Default value is @code{3.0}.
+@item tlength
+Specify the transform length in time domain. Use this option to control accuracy
+trade-off between time domain and frequency domain at every frequency sample.
+It can contain variables:
+@table @option
+@item frequency, freq, f
+the frequency where it is evaluated
+@item timeclamp, tc
+the value of @var{timeclamp} option.
+@end table
+Default value is @code{384*tc/(384+tc*f)}.
+
+@item count
+Specify the transform count for every video frame. Default value is @code{6}.
+Acceptable range is @code{[1, 30]}.
-@item gamma2
-Specify gamma of bargraph. Acceptable value is [1.0, 7.0].
-Default value is @code{1.0}.
+@item fcount
+Specify the transform count for every single pixel. Default value is @code{0},
+which makes it computed automatically. Acceptable range is @code{[0, 10]}.
@item fontfile
-Specify font file for use with freetype. If not specified, use embedded font.
+Specify font file for use with freetype to draw the axis. If not specified,
+use embedded font. Note that drawing with font file or embedded font is not
+implemented with custom @var{basefreq} and @var{endfreq}, use @var{axisfile}
+option instead.
@item fontcolor
Specify font color expression. This is arithmetic expression that should return
-integer value 0xRRGGBB. The expression can contain variables:
+integer value 0xRRGGBB. It can contain variables:
@table @option
@item frequency, freq, f
-the frequency where transform is evaluated
+the frequency where it is evaluated
@item timeclamp, tc
-value of timeclamp option
+the value of @var{timeclamp} option
@end table
and functions:
@table @option
@item midi(f)
midi number of frequency f, some midi numbers: E0(16), C1(24), C2(36), A4(69)
@item r(x), g(x), b(x)
-red, green, and blue value of intensity x
+red, green, and blue value of intensity x.
@end table
Default value is @code{st(0, (midi(f)-59.5)/12);
st(1, if(between(ld(0),0,1), 0.5-0.5*cos(2*PI*ld(0)), 0));
-r(1-ld(1)) + b(ld(1))}
+r(1-ld(1)) + b(ld(1))}.
-@item fullhd
-If set to 1 (the default), the video size is 1920x1080 (full HD),
-if set to 0, the video size is 960x540. Use this option to make CPU usage lower.
-
-@item fps
-Specify video fps. Default value is @code{25}.
+@item axisfile
+Specify image file to draw the axis. This option override @var{fontfile} and
+@var{fontcolor} option.
-@item count
-Specify number of transform per frame, so there are fps*count transforms
-per second. Note that audio data rate must be divisible by fps*count.
-Default value is @code{6}.
+@item axis, text
+Enable/disable drawing text to the axis. If it is set to @code{0}, drawing to
+the axis is disabled, ignoring @var{fontfile} and @var{axisfile} option.
+Default value is @code{1}.
@end table
@end example
@item
-Playing at 960x540 and lower CPU usage:
+Playing at 1280x720:
+@example
+ffplay -f lavfi 'amovie=a.mp3, asplit [a][out1]; [a] showcqt=s=1280x720:count=4 [out0]'
+@end example
+
+@item
+Disable sonogram display:
@example
-ffplay -f lavfi 'amovie=a.mp3, asplit [a][out1]; [a] showcqt=fullhd=0:count=3 [out0]'
+sono_h=0
@end example
@item
@end example
@item
-Same as above, but with more accuracy in frequency domain (and slower):
+Same as above, but with more accuracy in frequency domain:
@example
ffplay -f lavfi 'aevalsrc=0.1*sin(2*PI*55*t)+0.1*sin(4*PI*55*t)+0.1*sin(6*PI*55*t)+0.1*sin(8*PI*55*t),
asplit[a][out1]; [a] showcqt=timeclamp=0.5 [out0]'
@end example
@item
-B-weighting of equal loudness
+Custom volume:
@example
-volume=16*b_weighting(f)
+bar_v=10:sono_v=bar_v*a_weighting(f)
@end example
@item
-Lower Q factor
+Custom gamma, now spectrum is linear to the amplitude.
@example
-tlength=100/f*tc/(100/f+tc)
+bar_g=2:sono_g=2
@end example
@item
-Custom fontcolor, C-note is colored green, others are colored blue
+Custom tlength equation:
@example
-fontcolor='if(mod(floor(midi(f)+0.5),12), 0x0000FF, g(1))'
+tc=0.33:tlength='st(0,0.17); 384*tc / (384 / ld(0) + tc*f /(1-ld(0))) + 384*tc / (tc*f / ld(0) + 384 /(1-ld(0)))'
@end example
@item
-Custom gamma, now spectrum is linear to the amplitude.
+Custom fontcolor and fontfile, C-note is colored green, others are colored blue:
@example
-gamma=2:gamma2=2
+fontcolor='if(mod(floor(midi(f)+0.5),12), 0x0000FF, g(1))':fontfile=myfont.ttf
@end example
+@item
+Custom frequency range with custom axis using image file:
+@example
+axisfile=myaxis.png:basefreq=40:endfreq=10000
+@end example
@end itemize
@section showfreqs
projects / ffmpeg / blobdiff