@section idet
-Interlaceing detect filter. This filter tries to detect if the input is
-interlaced or progressive. Top or bottom field first.
+Detect video interlacing type.
+
+This filter tries to detect if the input is interlaced or progressive,
+top or bottom field first.
+
+@section il
+
+Deinterleave or interleave fields.
+
+This filter allows to process interlaced images fields without
+deinterlacing them. Deinterleaving splits the input frame into 2
+fields (so called half pictures). Odd lines are moved to the top
+half of the output image, even lines to the bottom half.
+You can process (filter) them independently and then re-interleave them.
+
+It accepts a list of options in the form of @var{key}=@var{value} pairs
+separated by ":". A description of the accepted options follows.
+
+@table @option
+@item luma_mode, l
+@item chroma_mode, s
+@item alpha_mode, a
+Available values for @var{luma_mode}, @var{chroma_mode} and
+@var{alpha_mode} are:
+
+@table @samp
+@item none
+Do nothing.
+
+@item deinterleave, d
+Deinterleave fields, placing one above the other.
+
+@item interleave, i
+Interleave fields. Reverse the effect of deinterleaving.
+@end table
+Default value is @code{none}.
+
+@item luma_swap, ls
+@item chroma_swap, cs
+@item alpha_swap, as
+Swap luma/chroma/alpha fields. Exchange even & odd lines. Default value is @code{0}.
+@end table
@section kerndeint
@item dint
@item divtc
@item down3dright
-@item dsize
@item eq2
@item eq
@item fil
@item ivtc
@item kerndeint
@item mcdeint
-@item noise
@item ow
@item perspective
@item phase
@item qp
@item sab
@item softpulldown
-@item softskip
@item spp
@item telecine
@item tinterlace
@example
mp=eq2=1.0:2:0.5
@end example
-
-@item
-Add temporal noise to input video:
-@example
-mp=noise=20t
-@end example
@end itemize
See also mplayer(1), @url{http://www.mplayerhq.hu/}.
noformat=yuv420p:yuv444p:yuv410p
@end example
+@section noise
+
+Add noise on video input frame.
+
+This filter accepts a list of options in the form of @var{key}=@var{value}
+pairs separated by ":". A description of the accepted options follows.
+
+@table @option
+@item all_seed
+@item c0_seed
+@item c1_seed
+@item c2_seed
+@item c3_seed
+Set noise seed for specific pixel component or all pixel components in case
+of @var{all_seed}. Default value is @code{123457}.
+
+@item all_strength, as
+@item c0_strength, c0s
+@item c1_strength, c1s
+@item c2_strength, c2s
+@item c3_strength, c3s
+Set noise strength for specific pixel component or all pixel components in case
+@var{all_strength}. Default value is @code{0}. Allowed range is [0, 100].
+
+@item all_flags, af
+@item c0_flags, c0f
+@item c1_flags, c1f
+@item c2_flags, c2f
+@item c3_flags, c3f
+Set pixel component flags or set flags for all components if @var{all_flags}.
+Available values for component flags are:
+@table @samp
+@item a
+averaged temporal noise (smoother)
+@item p
+mix random noise with a (semi)regular pattern
+@item q
+higher quality (slightly better looking, slightly slower)
+@item t
+temporal noise (noise pattern changes between frames)
+@item u
+uniform noise (gaussian otherwise)
+@end table
+@end table
+
+Some examples follow:
+@example
+Add temporal and uniform noise to input video:
+noise=alls=20:allf=t+u
+@end example
+
@section null
Pass the video source unchanged to the output.
@section swapuv
Swap U & V plane.
-@section il
-Deinterleave or interleave fields.
-
-This filter allows to process interlaced images fields without
-deinterlacing them. Deinterleaving splits the input frame into 2
-fields (so called half pictures). Odd lines are moved to the top
-half of the output image, even lines to the bottom half.
-You can process (filter) them independently and then re-interleave them.
-
-It accepts a list of options in the form of @var{key}=@var{value} pairs
-separated by ":". A description of the accepted options follows.
-
-@table @option
-@item luma_mode, l
-@item chroma_mode, s
-@item alpha_mode, a
-Available values for @var{luma_mode}, @var{chroma_mode} and
-@var{alpha_mode} are:
-
-@table @samp
-@item none
-Do nothing.
-
-@item deinterleave, d
-Deinterleave fields, placing one above the other.
-
-@item interleave, i
-Interleave fields. Reversing effect of deinterleave.
-@end table
-Default value is @code{none}.
-
-@item luma_swap, ls
-@item chroma_swap, cs
-@item alpha_swap, as
-Swap luma/chroma/alpha fields. Exchange even & odd lines. Default value is @code{0}.
-@end table
-
@section thumbnail
Select the most representative frame in a given sequence of consecutive frames.
Sharpen or blur the input video.
-It accepts the following parameters:
+This filter accepts parameters as a list of @var{key}=@var{value} pairs,
+separated by ":".
+
+If the key of the first options is omitted, the arguments are
+interpreted according to the syntax:
@var{luma_msize_x}:@var{luma_msize_y}:@var{luma_amount}:@var{chroma_msize_x}:@var{chroma_msize_y}:@var{chroma_amount}
-Negative values for the amount will blur the input video, while positive
-values will sharpen. All parameters are optional and default to the
-equivalent of the string '5:5:1.0:5:5:0.0'.
+A description of the accepted options follows.
@table @option
+@item luma_msize_x, lx
+@item chroma_msize_x, cx
+Set the luma/chroma matrix horizontal size. It can be an integer
+between 3 and 63, default value is 5.
-@item luma_msize_x
-Set the luma matrix horizontal size. It can be an integer between 3
-and 13, default value is 5.
-
-@item luma_msize_y
-Set the luma matrix vertical size. It can be an integer between 3
-and 13, default value is 5.
-
-@item luma_amount
-Set the luma effect strength. It can be a float number between -2.0
-and 5.0, default value is 1.0.
+@item luma_msize_y, ly
+@item chroma_msize_y, cy
+Set the luma/chroma matrix vertical size. It can be an integer between
+3 and 63, default value is 5.
-@item chroma_msize_x
-Set the chroma matrix horizontal size. It can be an integer between 3
-and 13, default value is 5.
+@item luma_amount, la
+@item chroma_amount, ca
+Set the luma/chroma effect strength. It can be a float number,
+reasonable values lay between -1.5 and 1.5.
-@item chroma_msize_y
-Set the chroma matrix vertical size. It can be an integer between 3
-and 13, default value is 5.
-
-@item chroma_amount
-Set the chroma effect strength. It can be a float number between -2.0
-and 5.0, default value is 0.0.
+Negative values will blur the input video, while positive values will
+sharpen it, a value of zero will disable the effect.
+Default value is 1.0 for @option{luma_amount}, 0.0 for
+@option{chroma_amount}.
@end table
+Some examples follow:
+@itemize
+@item
+Apply strong luma sharpen effect:
@example
-# Strong luma sharpen effect parameters
unsharp=7:7:2.5
+@end example
-# Strong blur of both luma and chroma parameters
+@item
+Apply strong blur of both luma and chroma parameters:
+@example
unsharp=7:7:-2:7:7:-2
-
-# Use the default values with @command{ffmpeg}
-ffmpeg -i in.avi -vf "unsharp" out.mp4
@end example
+@end itemize
@section vflip
projects / ffmpeg / blobdiff