@section Filtergraph syntax
A filtergraph can be represented using a textual representation, which
-is recognized by the @code{-vf} and @code{-af} options of the ff*
-tools, and by the @code{av_parse_graph()} function defined in
+is recognized by the @code{-vf} and @code{-af} options in @command{avconv}
+and @command{avplay}, and by the @code{av_parse_graph()} function defined in
@file{libavfilter/avfiltergraph}.
A filterchain consists of a sequence of connected filters, each one
@var{threshold} is the threshold below which a pixel value is
considered black, and defaults to 32.
+@section boxblur
+
+Apply boxblur algorithm to the input video.
+
+This filter accepts the parameters:
+@var{luma_power}:@var{luma_radius}:@var{chroma_radius}:@var{chroma_power}:@var{alpha_radius}:@var{alpha_power}
+
+Chroma and alpha parameters are optional, if not specified they default
+to the corresponding values set for @var{luma_radius} and
+@var{luma_power}.
+
+@var{luma_radius}, @var{chroma_radius}, and @var{alpha_radius} represent
+the radius in pixels of the box used for blurring the corresponding
+input plane. They are expressions, and can contain the following
+constants:
+@table @option
+@item w, h
+the input width and height in pixels
+
+@item cw, ch
+the input chroma image width and height in pixels
+
+@item hsub, vsub
+horizontal and vertical chroma subsample values. For example for the
+pixel format "yuv422p" @var{hsub} is 2 and @var{vsub} is 1.
+@end table
+
+The radius must be a non-negative number, and must not be greater than
+the value of the expression @code{min(w,h)/2} for the luma and alpha planes,
+and of @code{min(cw,ch)/2} for the chroma planes.
+
+@var{luma_power}, @var{chroma_power}, and @var{alpha_power} represent
+how many times the boxblur filter is applied to the corresponding
+plane.
+
+Some examples follow:
+
+@itemize
+
+@item
+Apply a boxblur filter with luma, chroma, and alpha radius
+set to 2:
+@example
+boxblur=2:1
+@end example
+
+@item
+Set luma radius to 2, alpha and chroma radius to 0
+@example
+boxblur=2:1:0:0:0:0
+@end example
+
+@item
+Set luma and chroma radius to a fraction of the video dimension
+@example
+boxblur=min(h\,w)/10:1:min(cw\,ch)/10:1
+@end example
+
+@end itemize
+
@section copy
Copy the input source unchanged to the output. Mainly useful for
playback.
@end table
+@section delogo
+
+Suppress a TV station logo by a simple interpolation of the surrounding
+pixels. Just set a rectangle covering the logo and watch it disappear
+(and sometimes something even uglier appear - your mileage may vary).
+
+The filter accepts parameters as a string of the form
+"@var{x}:@var{y}:@var{w}:@var{h}:@var{band}", or as a list of
+@var{key}=@var{value} pairs, separated by ":".
+
+The description of the accepted parameters follows.
+
+@table @option
+
+@item x, y
+Specify the top left corner coordinates of the logo. They must be
+specified.
+
+@item w, h
+Specify the width and height of the logo to clear. They must be
+specified.
+
+@item band, t
+Specify the thickness of the fuzzy edge of the rectangle (added to
+@var{w} and @var{h}). The default value is 4.
+
+@item show
+When set to 1, a green rectangle is drawn on the screen to simplify
+finding the right @var{x}, @var{y}, @var{w}, @var{h} parameters, and
+@var{band} is set to 4. The default value is 0.
+
+@end table
+
+Some examples follow.
+
+@itemize
+
+@item
+Set a rectangle covering the area with top left corner coordinates 0,0
+and size 100x77, setting a band of size 10:
+@example
+delogo=0:0:100:77:10
+@end example
+
+@item
+As the previous example, but use named options:
+@example
+delogo=x=0:y=0:w=100:h=77:band=10
+@end example
+
+@end itemize
+
@section drawbox
Draw a colored box on the input image.
Draw text string or text from specified file on top of video using the
libfreetype library.
-To enable compilation of this filter you need to configure FFmpeg with
+To enable compilation of this filter you need to configure Libav with
@code{--enable-libfreetype}.
The filter also recognizes strftime() sequences in the provided text
@item x, y
The offsets where text will be drawn within the video frame.
Relative to the top/left border of the output image.
+They accept expressions similar to the @ref{overlay} filter:
+@table @option
+
+@item x, y
+the computed values for @var{x} and @var{y}. They are evaluated for
+each new frame.
+
+@item main_w, main_h
+main input width and height
+
+@item W, H
+same as @var{main_w} and @var{main_h}
+
+@item text_w, text_h
+rendered text width and height
+
+@item w, h
+same as @var{text_w} and @var{text_h}
+
+@item n
+the number of frames processed, starting from 0
+
+@item t
+timestamp expressed in seconds, NAN if the input timestamp is unknown
+
+@end table
The default value of @var{x} and @var{y} is 0.
For example:
@example
-./ffmpeg -i in.vob -vf "fieldorder=bff" out.dv
+./avconv -i in.vob -vf "fieldorder=bff" out.dv
@end example
@section fifo
Flip the input video horizontally.
-For example to horizontally flip the video in input with
-@file{ffmpeg}:
+For example to horizontally flip the input video with @command{avconv}:
@example
-ffmpeg -i in.avi -vf "hflip" out.avi
+avconv -i in.avi -vf "hflip" out.avi
@end example
@section hqdn3d
(euler number), pi (greek PI), PHI (golden ratio)
@item w, h
-the input width and heigth
+the input width and height
@item val
input value for the pixel component
lutyuv=y=gammaval(0.5)
@end example
-@section noformat
+@section negate
+
+Negate input video.
+
+This filter accepts an integer in input, if non-zero it negates the
+alpha component (if available). The default value in input is 0.
Force libavfilter not to use any of the specified pixel formats for the
input to the next filter.
filter. If not specified the default values are assumed.
Refer to the official libopencv documentation for more precise
-informations:
+information:
@url{http://opencv.willowgarage.com/documentation/c/image_filtering.html}
Follows the list of supported libopencv filters.
@var{struct_el} represents a structuring element, and has the syntax:
@var{cols}x@var{rows}+@var{anchor_x}x@var{anchor_y}/@var{shape}
-@var{cols} and @var{rows} represent the number of colums and rows of
+@var{cols} and @var{rows} represent the number of columns and rows of
the structuring element, @var{anchor_x} and @var{anchor_y} the anchor
point, and @var{shape} the shape for the structuring element, and
can be one of the values "rect", "cross", "ellipse", "custom".
These parameters correspond to the parameters assigned to the
libopencv function @code{cvSmooth}.
+@anchor{overlay}
@section overlay
Overlay one video on top of another.
color=red@.3:WxH [over]; [in][over] overlay [out]
@end example
-You can chain togheter more overlays but the efficiency of such
+You can chain together more overlays but the efficiency of such
approach is yet to be tested.
@section pad
is used for the output.
The @var{width} expression can reference the value set by the
-@var{height} expression, and viceversa.
+@var{height} expression, and vice versa.
The default value of @var{width} and @var{height} is 0.
with respect to the top/left border of the output image.
The @var{x} expression can reference the value set by the @var{y}
-expression, and viceversa.
+expression, and vice versa.
The default value of @var{x} and @var{y} is 0.
@item pos
position of the frame in the input stream, -1 if this information in
-unavailable and/or meanigless (for example in case of synthetic video)
+unavailable and/or meaningless (for example in case of synthetic video)
@item fmt
pixel format name
slices.
@example
-./ffmpeg -i in.avi -vf "slicify=32" out.avi
+./avconv -i in.avi -vf "slicify=32" out.avi
@end example
The filter accepts the slice height as parameter. If the parameter is
# Strong blur of both luma and chroma parameters
unsharp=7:7:-2:7:7:-2
-# Use the default values with @command{ffmpeg}
-./ffmpeg -i in.avi -vf "unsharp" out.mp4
+# Use the default values with @command{avconv}
+./avconv -i in.avi -vf "unsharp" out.mp4
@end example
@section vflip
Flip the input video vertically.
@example
-./ffmpeg -i in.avi -vf "vflip" out.avi
+./avconv -i in.avi -vf "vflip" out.avi
@end example
@section yadif
If interlacing is unknown or decoder does not export this information,
top field first will be assumed.
-@var{auto] specifies if deinterlacer should trust the interlaced flag
+@var{auto} specifies if deinterlacer should trust the interlaced flag
and only deinterlace frames marked as interlaced
@table @option
It accepts the following parameters:
@var{width}:@var{height}:@var{pix_fmt_string}:@var{timebase_num}:@var{timebase_den}:@var{sample_aspect_ratio_num}:@var{sample_aspect_ratio.den}
-All the parameters need to be explicitely defined.
+All the parameters need to be explicitly defined.
Follows the list of the accepted parameters.
frei0r_src=200x200:10:partik0l=1234 [overlay]; [in][overlay] overlay
@end example
+@section rgbtestsrc, testsrc
+
+The @code{rgbtestsrc} source generates an RGB test pattern useful for
+detecting RGB vs BGR issues. You should see a red, green and blue
+stripe from top to bottom.
+
+The @code{testsrc} source generates a test video pattern, showing a
+color pattern, a scrolling gradient and a timestamp. This is mainly
+intended for testing purposes.
+
+Both sources accept an optional sequence of @var{key}=@var{value} pairs,
+separated by ":". The description of the accepted options follows.
+
+@table @option
+
+@item size, s
+Specify the size of the sourced video, it may be a string of the form
+@var{width}x@var{height}, or the name of a size abbreviation. The
+default value is "320x240".
+
+@item rate, r
+Specify the frame rate of the sourced video, as the number of frames
+generated per second. It has to be a string in the format
+@var{frame_rate_num}/@var{frame_rate_den}, an integer number, a float
+number or a valid video frame rate abbreviation. The default value is
+"25".
+
+@item sar
+Set the sample aspect ratio of the sourced video.
+
+@item duration
+Set the video duration of the sourced video. The accepted syntax is:
+@example
+[-]HH[:MM[:SS[.m...]]]
+[-]S+[.m...]
+@end example
+See also the function @code{av_parse_time()}.
+
+If not specified, or the expressed duration is negative, the video is
+supposed to be generated forever.
+@end table
+
+For example the following:
+@example
+testsrc=duration=5.3:size=qcif:rate=10
+@end example
+
+will generate a video with a duration of 5.3 seconds, with size
+176x144 and a framerate of 10 frames per second.
+
@c man end VIDEO SOURCES
@chapter Video Sinks
projects / ffmpeg / blobdiff