fade=in:5:20
@end example
+@section fieldorder
+
+Transform the field order of the input video.
+
+It accepts one parameter which specifies the required field order that
+the input interlaced video will be transformed to. The parameter can
+assume one of the following values:
+
+@table @option
+@item 0 or bff
+output bottom field first
+@item 1 or tff
+output top field first
+@end table
+
+Default value is "tff".
+
+Transformation is achieved by shifting the picture content up or down
+by one line, and filling the remaining line with appropriate picture content.
+This method is consistent with most broadcast field order converters.
+
+If the input video is not flagged as being interlaced, or it is already
+flagged as being of the required output field order then this filter does
+not alter the incoming video.
+
+This filter is very useful when converting to or from PAL DV material,
+which is bottom field first.
+
+For example:
+@example
+./ffmpeg -i in.vob -vf "fieldorder=bff" out.dv
+@end example
+
@section fifo
Buffer input images and send them when they are requested.
@item pullup
@item qp
@item rectangle
-@item remove_logo
+@item remove-logo
@item rgbtest
@item rotate
@item sab
It accepts the following parameters:
@var{width}:@var{height}:@var{x}:@var{y}:@var{color}.
+The parameters @var{width}, @var{height}, @var{x}, and @var{y} are
+expressions containing the following constants:
+
+@table @option
+@item E, PI, PHI
+the corresponding mathematical approximated values for e
+(euler number), pi (greek PI), phi (golden ratio)
+
+@item in_w, in_h
+the input video width and heigth
+
+@item iw, ih
+same as @var{in_w} and @var{in_h}
+
+@item out_w, out_h
+the output width and heigth, that is the size of the padded area as
+specified by the @var{width} and @var{height} expressions
+
+@item ow, oh
+same as @var{out_w} and @var{out_h}
+
+@item x, y
+x and y offsets as specified by the @var{x} and @var{y}
+expressions, or NAN if not yet specified
+
+@item a
+input display aspect ratio, same as @var{iw} / @var{ih}
+
+@item hsub, vsub
+horizontal and vertical chroma subsample values. For example for the
+pixel format "yuv422p" @var{hsub} is 2 and @var{vsub} is 1.
+@end table
+
Follows the description of the accepted parameters.
@table @option
value for @var{width} or @var{height} is 0, the corresponding input size
is used for the output.
+The @var{width} expression can reference the value set by the
+@var{height} expression, and viceversa.
+
The default value of @var{width} and @var{height} is 0.
@item x, y
Specify the offsets where to place the input image in the padded area
with respect to the top/left border of the output image.
+The @var{x} expression can reference the value set by the @var{y}
+expression, and viceversa.
+
The default value of @var{x} and @var{y} is 0.
@item color
@end table
-For example:
+Some examples follow:
@example
# Add paddings with color "violet" to the input video. Output video
# size is 640x480, the top-left corner of the input video is placed at
-# row 0, column 40.
+# column 0, row 40.
pad=640:480:0:40:violet
+
+# pad the input to get an output with dimensions increased bt 3/2,
+# and put the input video at the center of the padded area
+pad="3/2*iw:3/2*ih:(ow-iw)/2:(oh-ih)/2"
+
+# pad the input to get a squared output with size equal to the maximum
+# value between the input width and height, and put the input video at
+# the center of the padded area
+pad="max(iw\,ih):ow:(ow-iw)/2:(oh-ih)/2"
+
+# pad the input to get a final w/h ratio of 16:9
+pad="ih*16/9:ih:(ow-iw)/2:(oh-ih)/2"
+
+# double output size and put the input video in the bottom-right
+# corner of the output padded area
+pad="2*iw:2*ih:ow-iw:oh-ih"
@end example
@section pixdesctest
Scale the input video to @var{width}:@var{height} and/or convert the image format.
-For example the command:
+The parameters @var{width} and @var{height} are expressions containing
+the following constants:
-@example
-./ffmpeg -i in.avi -vf "scale=200:100" out.avi
-@end example
+@table @option
+@item E, PI, PHI
+the corresponding mathematical approximated values for e
+(euler number), pi (greek PI), phi (golden ratio)
+
+@item in_w, in_h
+the input width and heigth
+
+@item iw, ih
+same as @var{in_w} and @var{in_h}
+
+@item out_w, out_h
+the output (cropped) width and heigth
-will scale the input video to a size of 200x100.
+@item ow, oh
+same as @var{out_w} and @var{out_h}
+
+@item a
+input display aspect ratio, same as @var{iw} / @var{ih}
+
+@item hsub, vsub
+horizontal and vertical chroma subsample values. For example for the
+pixel format "yuv422p" @var{hsub} is 2 and @var{vsub} is 1.
+@end table
If the input image format is different from the format requested by
the next filter, the scale filter will convert the input to the
The default value of @var{width} and @var{height} is 0.
+Some examples follow:
+@example
+# scale the input video to a size of 200x100.
+scale=200:100
+
+# scale the input to 2x
+scale=2*iw:2*ih
+# the above is the same as
+scale=2*in_w:2*in_h
+
+# scale the input to half size
+scale=iw/2:ih/2
+
+# increase the width, and set the height to the same size
+scale=3/2*iw:ow
+
+# seek for Greek harmony
+scale=iw:1/PHI*iw
+scale=ih*PHI:ih
+
+# increase the height, and set the width to 3/2 of the height
+scale=3/2*oh:3/5*ih
+
+# increase the size, but make the size a multiple of the chroma
+scale="trunc(3/2*iw/hsub)*hsub:trunc(3/2*ih/vsub)*vsub"
+
+# increase the width to a maximum of 500 pixels, keep the same input aspect ratio
+scale='min(500\, iw*3/2):-1'
+@end example
+
+@section select
+Select frames to pass in output.
+
+It accepts in input an expression, which is evaluated for each input
+frame. If the expression is evaluated to a non-zero value, the frame
+is selected and passed to the output, otherwise it is discarded.
+
+The expression can contain the following constants:
+
+@table @option
+@item PI
+Greek PI
+
+@item PHI
+golden ratio
+
+@item E
+Euler number
+
+@item n
+the sequential number of the filtered frame, starting from 0
+
+@item selected_n
+the sequential number of the selected frame, starting from 0
+
+@item prev_selected_n
+the sequential number of the last selected frame, NAN if undefined
+
+@item TB
+timebase of the input timestamps
+
+@item pts
+the PTS (Presentation TimeStamp) of the filtered video frame,
+expressed in @var{TB} units, NAN if undefined
+
+@item t
+the PTS (Presentation TimeStamp) of the filtered video frame,
+expressed in seconds, NAN if undefined
+
+@item prev_pts
+the PTS of the previously filtered video frame, NAN if undefined
+
+@item prev_selected_pts
+the PTS of the last previously filtered video frame, NAN if undefined
+
+@item prev_selected_t
+the PTS of the last previously selected video frame, NAN if undefined
+
+@item start_pts
+the PTS of the first video frame in the video, NAN if undefined
+
+@item start_t
+the time of the first video frame in the video, NAN if undefined
+
+@item pict_type
+the picture type of the filtered frame, can assume one of the following
+values:
+@table @option
+@item PICT_TYPE_I
+@item PICT_TYPE_P
+@item PICT_TYPE_B
+@item PICT_TYPE_S
+@item PICT_TYPE_SI
+@item PICT_TYPE_SP
+@item PICT_TYPE_BI
+@end table
+
+@item interlace_type
+the frame interlace type, can assume one of the following values:
+@table @option
+@item INTERLACE_TYPE_P
+the frame is progressive (not interlaced)
+@item INTERLACE_TYPE_T
+the frame is top-field-first
+@item INTERLACE_TYPE_B
+the frame is bottom-field-first
+@end table
+
+@item key
+1 if the filtered frame is a key-frame, 0 otherwise
+
+@item pos
+the position in the file of the filtered frame, -1 if the information
+is not available (e.g. for synthetic video)
+@end table
+
+The default value of the select expression is "1".
+
+Some examples follow:
+
+@example
+# select all frames in input
+select
+
+# the above is the same as:
+select=1
+
+# skip all frames:
+select=0
+
+# select only I-frames
+select='eq(pict_type\,PICT_TYPE_I)'
+
+# select one frame every 100
+select='not(mod(n\,100))'
+
+# select only frames contained in the 10-20 time interval
+select='gte(t\,10)*lte(t\,20)'
+
+# select only I frames contained in the 10-20 time interval
+select='gte(t\,10)*lte(t\,20)*eq(pict_type\,PICT_TYPE_I)'
+
+# select frames with a minimum distance of 10 seconds
+select='isnan(prev_selected_t)+gte(t-prev_selected_t\,10)'
+@end example
+
@anchor{setdar}
@section setdar
settb=AVTB
@end example
+@section showinfo
+
+Show a line containing various information for each input video frame.
+The input video is not modified.
+
+The shown line contains a sequence of key/value pairs of the form
+@var{key}:@var{value}.
+
+A description of each shown parameter follows:
+
+@table @option
+@item n
+sequential number of the input frame, starting from 0
+
+@item pts
+Presentation TimeStamp of the input frame, expressed as a number of
+time base units. The time base unit depends on the filter input pad.
+
+@item pts_time
+Presentation TimeStamp of the input frame, expressed as a number of
+seconds
+
+@item pos
+position of the frame in the input stream, -1 if this information in
+unavailable and/or meanigless (for example in case of synthetic video)
+
+@item fmt
+pixel format name
+
+@item sar
+sample aspect ratio of the input frame, expressed in the form
+@var{num}/@var{den}
+
+@item s
+size of the input frame, expressed in the form
+@var{width}x@var{height}
+
+@item i
+interlaced mode ("P" for "progressive", "T" for top field first, "B"
+for bottom field first)
+
+@item iskey
+1 if the frame is a key frame, 0 otherwise
+
+@item type
+picture type of the input frame ("I" for an I-frame, "P" for a
+P-frame, "B" for a B-frame, "?" for unknown type).
+Check also the documentation of the @code{AVPictureType} enum and of
+the @code{av_get_picture_type_char} function defined in
+@file{libavutil/avutil.h}.
+
+@item checksum
+Adler-32 checksum of all the planes of the input frame
+
+@item plane_checksum
+Adler-32 checksum of each plane of the input frame, expressed in the form
+"[@var{c0} @var{c1} @var{c2} @var{c3}]"
+@end table
+
@section slicify
Pass the images of input video on to next video filter as multiple
Adding this in the beginning of filter chains should make filtering
faster due to better use of the memory cache.
+@section split
+
+Pass on the input video to two outputs. Both outputs are identical to
+the input video.
+
+For example:
+@example
+[in] split [splitout1][splitout2];
+[splitout1] crop=100:100:0:0 [cropout];
+[splitout2] pad=200:200:100:100 [padout];
+@end example
+
+will create two separate outputs from the same input, one cropped and
+one padded.
+
@section transpose
Transpose rows with columns in the input video and optionally flip it.
through the interface defined in @file{libavfilter/vsrc_buffer.h}.
It accepts the following parameters:
-@var{width}:@var{height}:@var{pix_fmt_string}:@var{timebase_num}:@var{timebase_den}:@var{sample_aspect_ratio_num}:@var{sample_aspect_ratio.den}
+@var{width}:@var{height}:@var{pix_fmt_string}:@var{timebase_num}:@var{timebase_den}:@var{sample_aspect_ratio_num}:@var{sample_aspect_ratio.den}:@var{scale_params}
-All the parameters need to be explicitely defined.
+All the parameters but @var{scale_params} need to be explicitely
+defined.
Follows the list of the accepted parameters.
@item sample_aspect_ratio.num, sample_aspect_ratio.den
Specify numerator and denominator of the sample aspect ratio assumed
by the video frames.
+
+@item scale_params
+Specify the optional parameters to be used for the scale filter which
+is automatically inserted when an input change is detected in the
+input size or format.
@end table
For example:
(check the enum PixelFormat definition in @file{libavutil/pixfmt.h}),
this example corresponds to:
@example
-buffer=320:240:6:1:24
+buffer=320:240:6:1:24:1:1
@end example
@section color
projects / ffmpeg / blobdiff