@table @option
@item x
@item y
-Specify the top left corner coordinates of the box. Default to 0.
+The expressions which specify the top left corner coordinates of the box. Default to 0.
@item width, w
@item height, h
-Specify the width and height of the box, if 0 they are interpreted as
+The expressions which specify the width and height of the box, if 0 they are interpreted as
the input width and height. Default to 0.
@item color, c
video with inverted luma.
@item thickness, t
-Set the thickness of the box edge. Default value is @code{4}.
+The expression which sets the thickness of the box edge. Default value is @code{3}.
+
+See below for the list of accepted constants.
+@end table
+
+The parameters for @var{x}, @var{y}, @var{w} and @var{h} and @var{t} are expressions containing the
+following constants:
+
+@table @option
+@item dar
+The input display aspect ratio, it is the same as (@var{w} / @var{h}) * @var{sar}.
+
+@item hsub
+@item vsub
+horizontal and vertical chroma subsample values. For example for the
+pixel format "yuv422p" @var{hsub} is 2 and @var{vsub} is 1.
+
+@item in_h, ih
+@item in_w, iw
+The input width and height.
+
+@item sar
+The input sample aspect ratio.
+
+@item x
+@item y
+The x and y offset coordinates where the box is drawn.
+
+@item w
+@item h
+The width and height of the drawn box.
+
+@item t
+The thickness of the drawn box.
+
+These constants allow the @var{x}, @var{y}, @var{w}, @var{h} and @var{t} expressions to refer to
+each other, so you may for example specify @code{y=x/dar} or @code{h=w/dar}.
+
@end table
@subsection Examples
@example
drawbox=x=10:y=10:w=100:h=100:color=pink@@0.5:t=max
@end example
+
+@item
+Draw a 2-pixel red 2.40:1 mask:
+@example
+drawbox=x=-t:y=0.5*(ih-iw/2.4)-t:w=iw+t*2:h=iw/2.4+t*2:t=2:c=red
+@end example
@end itemize
@section drawgrid
@table @option
@item x
@item y
-Specify the coordinates of some point of grid intersection (meant to configure offset). Both default to 0.
+The expressions which specify the coordinates of some point of grid intersection (meant to configure offset). Both default to 0.
@item width, w
@item height, h
-Specify the width and height of the grid cell, if 0 they are interpreted as the
+The expressions which specify the width and height of the grid cell, if 0 they are interpreted as the
input width and height, respectively, minus @code{thickness}, so image gets
framed. Default to 0.
to color name after @@ sign.
@item thickness, t
-Set the thickness of the grid line. Default value is @code{1}.
+The expression which sets the thickness of the grid line. Default value is @code{1}.
+
+See below for the list of accepted constants.
+@end table
+
+The parameters for @var{x}, @var{y}, @var{w} and @var{h} and @var{t} are expressions containing the
+following constants:
+
+@table @option
+@item dar
+The input display aspect ratio, it is the same as (@var{w} / @var{h}) * @var{sar}.
+
+@item hsub
+@item vsub
+horizontal and vertical chroma subsample values. For example for the
+pixel format "yuv422p" @var{hsub} is 2 and @var{vsub} is 1.
+
+@item in_h, ih
+@item in_w, iw
+The input grid cell width and height.
+
+@item sar
+The input sample aspect ratio.
+
+@item x
+@item y
+The x and y coordinates of some point of grid intersection (meant to configure offset).
+
+@item w
+@item h
+The width and height of the drawn cell.
+
+@item t
+The thickness of the drawn cell.
+
+These constants allow the @var{x}, @var{y}, @var{w}, @var{h} and @var{t} expressions to refer to
+each other, so you may for example specify @code{y=x/dar} or @code{h=w/dar}.
+
@end table
@subsection Examples
@example
drawgrid=width=100:height=100:thickness=2:color=red@@0.5
@end example
+
+@item
+Draw a white 3x3 grid with an opacity of 50%:
+@example
+drawgrid=w=iw/3:h=ih/3:t=2:c=white@@0.5
+@end example
@end itemize
@anchor{drawtext}
position of the text. They can be either positive or negative
values. Default value for both is "0".
+@item start_number
+The starting frame number for the n/frame_num variable. The default value
+is "0".
+
@item tabsize
The size in number of spaces to use for rendering the tab.
Default value is 4.
@item mode
Set the matching mode or strategy to use. @option{pc} mode is the safest in the
-sense that it wont risk creating jerkiness due to duplicate frames when
+sense that it won't risk creating jerkiness due to duplicate frames when
possible, but if there are bad edits or blended fields it will end up
outputting combed frames when a good match might actually exist. On the other
hand, @option{pcn_ub} mode is the most risky in terms of creating jerkiness,
@table @option
@item luma_mode, l
-@item chroma_mode, s
+@item chroma_mode, c
@item alpha_mode, a
Available values for @var{luma_mode}, @var{chroma_mode} and
@var{alpha_mode} are:
@item pullup
@item qp
@item softpulldown
-@item spp
@item uspp
@end table
the image and will destroy more information than necessary, and extra
pixels will slow things down on a large logo.
+@section rotate
+
+Rotate video by an arbitrary angle expressed in radians.
+
+The filter accepts the following options:
+
+A description of the optional parameters follows.
+@table @option
+@item angle, a
+Set an expression for the angle by which to rotate the input video
+clockwise, expressed as a number of radians. A negative value will
+result in a counter-clockwise rotation. By default it is set to "0".
+
+This expression is evaluated for each frame.
+
+@item out_w, ow
+Set the output width expression, default value is "iw".
+This expression is evaluated just once during configuration.
+
+@item out_h, oh
+Set the output height expression, default value is "ih".
+This expression is evaluated just once during configuration.
+
+@item bilinear
+Enable bilinear interpolation if set to 1, a value of 0 disables
+it. Default value is 1.
+
+@item fillcolor, c
+Set the color used to fill the output area not covered by the rotated
+image. If the special value "none" is selected then no background is
+printed (useful for example if the background is never shown). Default
+value is "black".
+@end table
+
+The expressions for the angle and the output size can contain the
+following constants and functions:
+
+@table @option
+@item n
+sequential number of the input frame, starting from 0. It is always NAN
+before the first frame is filtered.
+
+@item t
+time in seconds of the input frame, it is set to 0 when the filter is
+configured. It is always NAN before the first frame is filtered.
+
+@item hsub
+@item vsub
+horizontal and vertical chroma subsample values. For example for the
+pixel format "yuv422p" @var{hsub} is 2 and @var{vsub} is 1.
+
+@item in_w, iw
+@item in_h, ih
+the input video width and heigth
+
+@item out_w, ow
+@item out_h, oh
+the output width and heigth, that is the size of the padded area as
+specified by the @var{width} and @var{height} expressions
+
+@item rotw(a)
+@item roth(a)
+the minimal width/height required for completely containing the input
+video rotated by @var{a} radians.
+
+These are only available when computing the @option{out_w} and
+@option{out_h} expressions.
+@end table
+
+@subsection Examples
+
+@itemize
+@item
+Rotate the input by PI/6 radians clockwise:
+@example
+rotate=PI/6
+@end example
+
+@item
+Rotate the input by PI/6 radians counter-clockwise:
+@example
+rotate=-PI/6
+@end example
+
+@item
+Apply a constant rotation with period T, starting from an angle of PI/3:
+@example
+rotate=PI/3+2*PI*t/T
+@end example
+
+@item
+Make the input video rotation oscillating with a period of T
+seconds and an amplitude of A radians:
+@example
+rotate=A*sin(2*PI/T*t)
+@end example
+
+@item
+Rotate the video, output size is choosen so that the whole rotating
+input video is always completely contained in the output:
+@example
+rotate='2*PI*t:ow=hypot(iw,ih):oh=ow'
+@end example
+
+@item
+Rotate the video, reduce the output size so that no background is ever
+shown:
+@example
+rotate=2*PI*t:ow='min(iw,ih)/sqrt(2)':oh=ow:c=none
+@end example
+@end itemize
+
+@subsection Commands
+
+The filter supports the following commands:
+
+@table @option
+@item a, angle
+Set the angle expression.
+The command accepts the same syntax of the corresponding option.
+
+If the specified expression is not valid, it is kept at its current
+value.
+@end table
+
@section sab
Apply Shape Adaptive Blur.
@end example
@end itemize
+@section spp
+
+Apply a simple postprocessing filter that compresses and decompresses the image
+at several (or - in the case of @option{quality} level @code{6} - all) shifts
+and average the results.
+
+The filter accepts the following options:
+
+@table @option
+@item quality
+Set quality. This option defines the number of levels for averaging. It accepts
+an integer in the range 0-6. If set to @code{0}, the filter will have no
+effect. A value of @code{6} means the higher quality. For each increment of
+that value the speed drops by a factor of approximately 2. Default value is
+@code{3}.
+
+@item qp
+Force a constant quantization parameter. If not set, the filter will use the QP
+from the video stream (if available).
+
+@item mode
+Set thresholding mode. Available modes are:
+
+@table @samp
+@item hard
+Set hard thresholding (default).
+@item soft
+Set soft thresholding (better de-ringing effect, but likely blurrier).
+@end table
+
+@item use_bframe_qp
+Enable the use of the QP from the B-Frames if set to @code{1}. Using this
+option may cause flicker since the B-Frames have often larger QP. Default is
+@code{0} (not enabled).
+@end table
+
@anchor{subtitles}
@section subtitles