aformat=sample_fmts\=u8\,s16:channel_layouts\=stereo
@end example
+@section amix
+
+Mixes multiple audio inputs into a single output.
+
+For example
+@example
+avconv -i INPUT1 -i INPUT2 -i INPUT3 -filter_complex amix=inputs=3:duration=first:dropout_transition=3 OUTPUT
+@end example
+will mix 3 input audio streams to a single output with the same duration as the
+first input and a dropout transition time of 3 seconds.
+
+The filter accepts the following named parameters:
+@table @option
+
+@item inputs
+Number of inputs. If unspecified, it defaults to 2.
+
+@item duration
+How to determine the end-of-stream.
+@table @option
+
+@item longest
+Duration of longest input. (default)
+
+@item shortest
+Duration of shortest input.
+
+@item first
+Duration of first input.
+
+@end table
+
+@item dropout_transition
+Transition time, in seconds, for volume renormalization when an input
+stream ends. The default value is 2 seconds.
+
+@end table
+
@section anull
Pass the audio source unchanged to the output.
+@section asplit
+
+Split input audio into several identical outputs.
+
+The filter accepts a single parameter which specifies the number of outputs. If
+unspecified, it defaults to 2.
+
+For example
+@example
+avconv -i INPUT -filter_complex asplit=5 OUTPUT
+@end example
+will create 5 copies of the input audio.
+
+@section asyncts
+Synchronize audio data with timestamps by squeezing/stretching it and/or
+dropping samples/adding silence when needed.
+
+The filter accepts the following named parameters:
+@table @option
+
+@item compensate
+Enable stretching/squeezing the data to make it match the timestamps.
+
+@item min_delta
+Minimum difference between timestamps and audio data (in seconds) to trigger
+adding/dropping samples.
+
+@item max_comp
+Maximum compensation in samples per second.
+
+@item first_pts
+Assume the first pts should be this value.
+This allows for padding/trimming at the start of stream. By default, no
+assumption is made about the first frame's expected pts, so no padding or
+trimming is done. For example, this could be set to 0 to pad the beginning with
+silence if an audio stream starts after the video stream.
+
+@end table
+
+@section channelsplit
+Split each channel in input audio stream into a separate output stream.
+
+This filter accepts the following named parameters:
+@table @option
+@item channel_layout
+Channel layout of the input stream. Default is "stereo".
+@end table
+
+For example, assuming a stereo input MP3 file
+@example
+avconv -i in.mp3 -filter_complex channelsplit out.mkv
+@end example
+will create an output Matroska file with two audio streams, one containing only
+the left channel and the other the right channel.
+
+To split a 5.1 WAV file into per-channel files
+@example
+avconv -i in.wav -filter_complex
+'channelsplit=channel_layout=5.1[FL][FR][FC][LFE][SL][SR]'
+-map '[FL]' front_left.wav -map '[FR]' front_right.wav -map '[FC]'
+front_center.wav -map '[LFE]' lfe.wav -map '[SL]' side_left.wav -map '[SR]'
+side_right.wav
+@end example
+
+@section channelmap
+Remap input channels to new locations.
+
+This filter accepts the following named parameters:
+@table @option
+@item channel_layout
+Channel layout of the output stream.
+
+@item map
+Map channels from input to output. The argument is a comma-separated list of
+mappings, each in the @code{@var{in_channel}-@var{out_channel}} or
+@var{in_channel} form. @var{in_channel} can be either the name of the input
+channel (e.g. FL for front left) or its index in the input channel layout.
+@var{out_channel} is the name of the output channel or its index in the output
+channel layout. If @var{out_channel} is not given then it is implicitly an
+index, starting with zero and increasing by one for each mapping.
+@end table
+
+If no mapping is present, the filter will implicitly map input channels to
+output channels preserving index.
+
+For example, assuming a 5.1+downmix input MOV file
+@example
+avconv -i in.mov -filter 'channelmap=map=DL-FL\,DR-FR' out.wav
+@end example
+will create an output WAV file tagged as stereo from the downmix channels of
+the input.
+
+To fix a 5.1 WAV improperly encoded in AAC's native channel order
+@example
+avconv -i in.wav -filter 'channelmap=1\,2\,0\,5\,3\,4:channel_layout=5.1' out.wav
+@end example
+
+@section join
+Join multiple input streams into one multi-channel stream.
+
+The filter accepts the following named parameters:
+@table @option
+
+@item inputs
+Number of input streams. Defaults to 2.
+
+@item channel_layout
+Desired output channel layout. Defaults to stereo.
+
+@item map
+Map channels from inputs to output. The argument is a comma-separated list of
+mappings, each in the @code{@var{input_idx}.@var{in_channel}-@var{out_channel}}
+form. @var{input_idx} is the 0-based index of the input stream. @var{in_channel}
+can be either the name of the input channel (e.g. FL for front left) or its
+index in the specified input stream. @var{out_channel} is the name of the output
+channel.
+@end table
+
+The filter will attempt to guess the mappings when those are not specified
+explicitly. It does so by first trying to find an unused matching input channel
+and if that fails it picks the first unused input channel.
+
+E.g. to join 3 inputs (with properly set channel layouts)
+@example
+avconv -i INPUT1 -i INPUT2 -i INPUT3 -filter_complex join=inputs=3 OUTPUT
+@end example
+
+To build a 5.1 output from 6 single-channel streams:
+@example
+avconv -i fl -i fr -i fc -i sl -i sr -i lfe -filter_complex
+'join=inputs=6:channel_layout=5.1:map=0.0-FL\,1.0-FR\,2.0-FC\,3.0-SL\,4.0-SR\,5.0-LFE'
+out
+@end example
+
@section resample
Convert the audio sample format, sample rate and channel layout. This filter is
not meant to be used directly, it is inserted automatically by libavfilter
format=yuv420p:yuv444p:yuv410p
@end example
+@section fps
+
+Convert the video to specified constant framerate by duplicating or dropping
+frames as necessary.
+
+This filter accepts the following named parameters:
+@table @option
+
+@item fps
+Desired output framerate.
+
+@end table
+
@anchor{frei0r}
@section frei0r
Read a video stream from a movie container.
+Note that this source is a hack that bypasses the standard input path. It can be
+useful in applications that do not support arbitrary filter graphs, but its use
+is discouraged in those that do. Specifically in @command{avconv} this filter
+should never be used, the @option{-filter_complex} option fully replaces it.
+
It accepts the syntax: @var{movie_name}[:@var{options}] where
@var{movie_name} is the name of the resource to read (not necessarily
a file but also a device or a stream accessed through some protocol),
projects / ffmpeg / blobdiff