@item -capture_mouse_clicks
Capture the screen mouse clicks. Default is 0.
+@item -capture_raw_data
+Capture the raw device data. Default is 0.
+Using this option may result in receiving the underlying data delivered to the AVFoundation framework. E.g. for muxed devices that sends raw DV data to the framework (like tape-based camcorders), setting this option to false results in extracted video frames captured in the designated pixel format only. Setting this option to true results in receiving the raw DV stream untouched.
@end table
@subsection Examples
$ ffmpeg -f avfoundation -pixel_format bgr0 -i "default:none" out.avi
@end example
+@item
+Record raw DV data from a suitable input device and write the output into out.dv:
+@example
+$ ffmpeg -f avfoundation -capture_raw_data true -i "zr100:none" out.dv
+@end example
+
+
@end itemize
@section bktr
@item list_devices
If set to @option{true}, print a list of devices and exit.
-Defaults to @option{false}.
+Defaults to @option{false}. Alternatively you can use the @code{-sources}
+option of ffmpeg to list the available input devices.
@item list_formats
If set to @option{true}, print a list of supported formats and exit.
the initial offset.
Defaults to @option{false}.
+@item timestamp_align
+Capture start time alignment in seconds. If set to nonzero, input frames are
+dropped till the system timestamp aligns with configured value.
+Alignment difference of up to one frame duration is tolerated.
+This is useful for maintaining input synchronization across N different
+hardware devices deployed for 'N-way' redundancy. The system time of different
+hardware devices should be synchronized with protocols such as NTP or PTP,
+before using this option.
+Note that this method is not foolproof. In some border cases input
+synchronization may not happen due to thread scheduling jitters in the OS.
+Either sync could go wrong by 1 frame or in a rarer case
+@option{timestamp_align} seconds.
+Defaults to @samp{0}.
+
+@item wait_for_tc (@emph{bool})
+Drop frames till a frame with timecode is received. Sometimes serial timecode
+isn't received with the first input frame. If that happens, the stored stream
+timecode will be inaccurate. If this option is set to @option{true}, input frames
+are dropped till a frame with timecode is received.
+Option @var{timecode_format} must be specified.
+Defaults to @option{false}.
+
@end table
@subsection Examples
Grab and record the input of a FireWire DV/HDV device,
using a packet buffer of 100000 packets if the source is HDV.
@example
-ffmpeg -f iec61883 -i auto -hdvbuffer 100000 out.mpg
+ffmpeg -f iec61883 -i auto -dvbuffer 100000 out.mpg
@end example
@end itemize
ffmpeg -crtc_id 42 -framerate 60 -f kmsgrab -i - -vf 'hwmap=derive_device=vaapi,scale_vaapi=w=1920:h=1080:format=nv12' -c:v h264_vaapi output.mp4
@end example
+@item
+To capture only part of a plane the output can be cropped - this can be used to capture
+a single window, as long as it has a known absolute position and size. For example, to
+capture and encode the middle quarter of a 1920x1080 plane:
+@example
+ffmpeg -f kmsgrab -i - -vf 'hwmap=derive_device=vaapi,crop=960:540:480:270,scale_vaapi=960:540:nv12' -c:v h264_vaapi output.mp4
+@end example
+
@end itemize
@section lavfi
Requires the configure option @code{--enable-libdc1394}.
-@section libndi_newtek
-
-The libndi_newtek input device provides capture capabilities for using NDI (Network
-Device Interface, standard created by NewTek).
-
-Input filename is a NDI source name that could be found by sending -find_sources 1
-to command line - it has no specific syntax but human-readable formatted.
-
-To enable this input device, you need the NDI SDK and you
-need to configure with the appropriate @code{--extra-cflags}
-and @code{--extra-ldflags}.
-
@subsection Options
-
@table @option
-@item find_sources
-If set to @option{true}, print a list of found/available NDI sources and exit.
-Defaults to @option{false}.
-
-@item wait_sources
-Override time to wait until the number of online sources have changed.
-Defaults to @option{0.5}.
+@item framerate
+Set the frame rate. Default is @code{ntsc}, corresponding to a frame
+rate of @code{30000/1001}.
-@item allow_video_fields
-When this flag is @option{false}, all video that you receive will be progressive.
-Defaults to @option{true}.
+@item pixel_format
+Select the pixel format. Default is @code{uyvy422}.
+@item video_size
+Set the video size given as a string such as @code{640x480} or @code{hd720}.
+Default is @code{qvga}.
@end table
-@subsection Examples
-
-@itemize
-
-@item
-List input devices:
-@example
-ffmpeg -f libndi_newtek -find_sources 1 -i dummy
-@end example
-
-@item
-Restream to NDI:
-@example
-ffmpeg -f libndi_newtek -i "DEV-5.INTERNAL.M1STEREO.TV (NDI_SOURCE_NAME_1)" -f libndi_newtek -y NDI_SOURCE_NAME_2
-@end example
-
-@end itemize
-
@section openal
The OpenAL input device provides audio capture on all systems with a
@end example
@item video_size
-Set the video frame size. Default value is @code{vga}.
+Set the video frame size. Default is the full desktop.
@item grab_x
@item grab_y
projects / ffmpeg / blobdiff