@anchor{chromaprint}
@section chromaprint
-Chromaprint fingerprinter
+Chromaprint fingerprinter.
-This muxer feeds audio data to the Chromaprint library, which generates
-a fingerprint for the provided audio data. It takes a single signed
-native-endian 16-bit raw audio stream.
+This muxer feeds audio data to the Chromaprint library,
+which generates a fingerprint for the provided audio data. See @url{https://acoustid.org/chromaprint}
+
+It takes a single signed native-endian 16-bit raw audio stream of at most 2 channels.
@subsection Options
@table @option
@item silence_threshold
-Threshold for detecting silence, ranges from 0 to 32767. -1 for default
-(required for use with the AcoustID service).
+Threshold for detecting silence, ranges from -1 to 32767. -1 disables silence detection and
+is required for use with the AcoustID service. Default is -1.
@item algorithm
-Algorithm index to fingerprint with.
+Version of algorithm to fingerprint with. Range is 0 to 4. Version 2 requires that silence
+detection be enabled. Default is 1.
@item fp_format
Format to output the fingerprint as. Accepts the following options:
Binary compressed fingerprint
@item base64
-Base64 compressed fingerprint
+Base64 compressed fingerprint @emph{(default)}
@end table
The segment filename might contain pre-defined identifiers used with SegmentTemplate
as defined in section 5.3.9.4.4 of the standard. Available identifiers are "$RepresentationID$",
"$Number$", "$Bandwidth$" and "$Time$".
+In addition to the standard identifiers, an ffmpeg-specific "$ext$" identifier is also supported.
+When specified ffmpeg will replace $ext$ in the file name with muxing format's extensions such as mp4, webm etc.,
@example
ffmpeg -re -i <input> -map 0 -map 0 -c:a libfdk_aac -c:v libx264
key=value parameters. Values containing @code{:} special characters must be
escaped.
+@item -global_sidx @var{global_sidx}
+Write global SIDX atom. Applicable only for single file, mp4 output, non-streaming mode.
+
@item -dash_segment_type @var{dash_segment_type}
Possible values:
@item auto
@item webm
If this flag is set, the dash segment files will be in in WebM format.
+@item -ignore_io_errors @var{ignore_io_errors}
+Ignore IO errors during open and write. Useful for long-duration runs with network output.
+
+@item -lhls @var{lhls}
+Enable Low-latency HLS(LHLS). Adds #EXT-X-PREFETCH tag with current segment's URI.
+Apple doesn't have an official spec for LHLS. Meanwhile hls.js player folks are
+trying to standardize a open LHLS spec. The draft spec is available in https://github.com/video-dev/hlsjs-rfcs/blob/lhls-spec/proposals/0001-lhls.md
+This option will also try to comply with the above open spec, till Apple's spec officially supports it.
+Applicable only when @var{streaming} and @var{hls_playlist} options are enabled.
+This is an experimental feature.
+
+@item -master_m3u8_publish_rate @var{master_m3u8_publish_rate}
+Publish master playlist repeatedly every after specified number of segment intervals.
+
@end table
@anchor{framecrc}
By default, a single hls variant containing all the encoded streams is created.
+@example
+ffmpeg -re -i in.ts -b:a:0 32k -b:a:1 64k -b:v:0 1000k \
+ -map 0:a -map 0:a -map 0:v -f hls \
+ -var_stream_map "a:0,agroup:aud_low,default:yes a:1,agroup:aud_low v:0,agroup:aud_low" \
+ -master_pl_name master.m3u8 \
+ http://example.com/live/out_%v.m3u8
+@end example
+This example creates two audio only and one video only variant streams. In
+addition to the #EXT-X-STREAM-INF tag for each variant stream in the master
+playlist, #EXT-X-MEDIA tag is also added for the two audio only variant streams
+and they are mapped to the one video only variant streams with audio group name
+'aud_low', and the audio group have default stat is NO or YES.
+
+By default, a single hls variant containing all the encoded streams is created.
+
+@example
+ffmpeg -re -i in.ts -b:a:0 32k -b:a:1 64k -b:v:0 1000k \
+ -map 0:a -map 0:a -map 0:v -f hls \
+ -var_stream_map "a:0,agroup:aud_low,default:yes,language=ENG a:1,agroup:aud_low,language:CHN v:0,agroup:aud_low" \
+ -master_pl_name master.m3u8 \
+ http://example.com/live/out_%v.m3u8
+@end example
+This example creates two audio only and one video only variant streams. In
+addition to the #EXT-X-STREAM-INF tag for each variant stream in the master
+playlist, #EXT-X-MEDIA tag is also added for the two audio only variant streams
+and they are mapped to the one video only variant streams with audio group name
+'aud_low', and the audio group have default stat is NO or YES, and one audio
+have and language is named ENG, the other audio language is named CHN.
+
+By default, a single hls variant containing all the encoded streams is created.
+
@item cc_stream_map
Map string which specifies different closed captions groups and their
attributes. The closed captions stream groups are separated by space.
http://example.com/live/out.m3u8
@end example
This example adds @code{#EXT-X-MEDIA} tag with @code{TYPE=CLOSED-CAPTIONS} in
-the master playlist with group name 'cc', langauge 'en' (english) and
+the master playlist with group name 'cc', language 'en' (english) and
INSTREAM-ID 'CC1'. Also, it adds @code{CLOSED-CAPTIONS} attribute with group
name 'cc' for the output variant stream.
@example
@item timeout
Set timeout for socket I/O operations. Applicable only for HTTP output.
+@item -ignore_io_errors
+Ignore IO errors during open, write and delete. Useful for long-duration runs with network output.
+
@end table
@anchor{ico}
pair for each track, making it easier to separate tracks.
This option is implicitly set when writing ismv (Smooth Streaming) files.
+@item -movflags skip_sidx
+Skip writing of sidx atom. When bitrate overhead due to sidx atom is high,
+this option could be used for cases where sidx atom is not mandatory.
+When global_sidx flag is enabled, this option will be ignored.
@item -movflags faststart
Run a second pass moving the index (moov atom) to the beginning of the file.
This operation can take a while, and will not work in various situations such
Accepts the following options:
@table @samp
@item hex_value
-Any hexdecimal value between @code{0x01} to @code{0xff} as defined in
+Any hexadecimal value between @code{0x01} and @code{0xff} as defined in
ETSI 300 468.
@item digital_tv
Digital TV service.
out.ts
@end example
-@section mxf, mxf_d10
+@section mxf, mxf_d10, mxf_opatom
MXF muxer.
@item store_user_comments @var{bool}
Set if user comments should be stored if available or never.
IRT D-10 does not allow user comments. The default is thus to write them for
-mxf but not for mxf_d10
+mxf and mxf_opatom but not for mxf_d10
@end table
@section null
projects / ffmpeg / blobdiff