reading files that still are being written. In order for this to terminate,
you either need to use the rw_timeout option, or use the interrupt callback
(for API users).
+
+@item seekable
+Controls if seekability is advertised on the file. 0 means non-seekable, -1
+means auto (seekable for normal files, non-seekable for named pipes).
+
+Many demuxers handle seekable and non-seekable resources differently,
+overriding this might speed up opening certain files at the cost of losing some
+features (e.g. accurate seeking).
@end table
@section ftp
operation. By default it is set to -1, which means that the timeout is
not specified.
+@item ftp-user
+Set a user to be used for authenticating to the FTP server. This is overridden by the
+user in the FTP URL.
+
+@item ftp-password
+Set a password to be used for authenticating to the FTP server. This is overridden by
+the password in the FTP URL, or by @option{ftp-anonymous-password} if no user is set.
+
@item ftp-anonymous-password
Password used when login as anonymous user. Typically an e-mail address
should be used.
wget --post-file=somefile.ogg http://@var{server}:@var{port}
@end example
+@item send_expect_100
+Send an Expect: 100-continue header for POST. If set to 1 it will send, if set
+to 0 it won't, if set to -1 it will try to send if it is applicable. Default
+value is -1.
+
@end table
@subsection HTTP Cookies
the receiver only if the received data is encrypted.
The configured passphrase cannot be recovered (write-only).
+@item enforced_encryption=@var{1|0}
+If true, both connection parties must have the same password
+set (including empty, that is, with no encryption). If the
+password doesn't match or only one side is unencrypted,
+the connection is rejected. Default is true.
+
+@item kmrefreshrate=@var{packets}
+The number of packets to be transmitted after which the
+encryption key is switched to a new key. Default is -1.
+-1 means auto (0x1000000 in srt library). The range for
+this option is integers in the 0 - @code{INT_MAX}.
+
+@item kmpreannounce=@var{packets}
+The interval between when a new encryption key is sent and
+when switchover occurs. This value also applies to the
+subsequent interval between when switchover occurs and
+when the old encryption key is decommissioned. Default is -1.
+-1 means auto (0x1000 in srt library). The range for
+this option is integers in the 0 - @code{INT_MAX}.
+
@item payload_size=@var{bytes}
Sets the maximum declared size of a packet transferred
during the single call to the sending function in Live
@item send_buffer_size=@var{bytes}
Set UDP send buffer size, expressed in bytes.
-@item rw_timeout
-Set raise error timeout for read/write optations.
-
-This option is only relevant in read mode:
-if no data arrived in more than this time
-interval, raise error.
+@item timeout
+Set raise error timeouts for read, write and connect operations. Note that the
+SRT library has internal timeouts which can be controlled separately, the
+value set here is only a cap on those.
@item tlpktdrop=@var{1|0}
Too-late Packet Drop. When enabled on receiver, it skips
file: Set options as for non-live transmission. See @option{messageapi}
for further explanations
+@item linger=@var{seconds}
+The number of seconds that the socket waits for unsent data when closing.
+Default is -1. -1 means auto (off with 0 seconds in live mode, on with 180
+seconds in file mode). The range for this option is integers in the
+0 - @code{INT_MAX}.
+
@end table
For more information see: @url{https://github.com/Haivision/srt}.
@item buffer_size=@var{size}
Set the UDP maximum socket buffer size in bytes. This is used to set either
the receive or send buffer size, depending on what the socket is used for.
-Default is 64KB. See also @var{fifo_size}.
+Default is 32 KB for output, 384 KB for input. See also @var{fifo_size}.
@item bitrate=@var{bitrate}
If set to nonzero, the output will have the specified constant bitrate if the
Create the Unix socket in listening mode.
@end table
+@section zmq
+
+ZeroMQ asynchronous messaging using the libzmq library.
+
+This library supports unicast streaming to multiple clients without relying on
+an external server.
+
+The required syntax for streaming or connecting to a stream is:
+@example
+zmq:tcp://ip-address:port
+@end example
+
+Example:
+Create a localhost stream on port 5555:
+@example
+ffmpeg -re -i input -f mpegts zmq:tcp://127.0.0.1:5555
+@end example
+
+Multiple clients may connect to the stream using:
+@example
+ffplay zmq:tcp://127.0.0.1:5555
+@end example
+
+Streaming to multiple clients is implemented using a ZeroMQ Pub-Sub pattern.
+The server side binds to a port and publishes data. Clients connect to the
+server (via IP address/port) and subscribe to the stream. The order in which
+the server and client start generally does not matter.
+
+ffmpeg must be compiled with the --enable-libzmq option to support
+this protocol.
+
+Options can be set on the @command{ffmpeg}/@command{ffplay} command
+line. The following options are supported:
+
+@table @option
+
+@item pkt_size
+Forces the maximum packet size for sending/receiving data. The default value is
+32,768 bytes. On the server side, this sets the maximum size of sent packets
+via ZeroMQ. On the clients, it sets an internal buffer size for receiving
+packets. Note that pkt_size on the clients should be equal to or greater than
+pkt_size on the server. Otherwise the received message may be truncated causing
+decoding errors.
+
+@end table
+
+
@c man end PROTOCOLS
projects / ffmpeg / blobdiff