Gopher protocol.
+@section gophers
+
+Gophers protocol.
+
+The Gopher protocol with TLS encapsulation.
+
@section hls
Read Apple HTTP Live Streaming compliant segmented stream as
-f rtp_mpegts -fec prompeg=l=8:d=4 rtp://@var{hostname}:@var{port}
@end example
+@section rist
+
+Reliable Internet Streaming Transport protocol
+
+The accepted options are:
+@table @option
+@item rist_profile
+Supported values:
+@table @samp
+@item simple
+@item main
+This one is default.
+@item advanced
+@end table
+
+@item buffer_size
+Set internal RIST buffer size in milliseconds for retransmission of data.
+Default value is 0 which means the librist default (1 sec). Maximum value is 30
+seconds.
+
+@item pkt_size
+Set maximum packet size for sending data. 1316 by default.
+
+@item log_level
+Set loglevel for RIST logging messages. You only need to set this if you
+explicitly want to enable debug level messages or packet loss simulation,
+otherwise the regular loglevel is respected.
+
+@item secret
+Set override of encryption secret, by default is unset.
+
+@item encryption
+Set encryption type, by default is disabled.
+Acceptable values are 128 and 256.
+@end table
+
@section rtmp
Real-Time Messaging Protocol.
@item pkt_size=@var{n}
Set max packet size (in bytes) to @var{n}.
+@item buffer_size=@var{size}
+Set the maximum UDP socket buffer size in bytes.
+
@item connect=0|1
Do a @code{connect()} on the UDP socket (if set to 1) or not (if set
to 0).
The list of supported options follows.
@table @option
-@item listen=@var{1|0}
-Listen for an incoming connection. Default value is 0.
+@item listen=@var{2|1|0}
+Listen for an incoming connection. 0 disables listen, 1 enables listen in
+single client mode, 2 enables listen in multi-client mode. Default value is 0.
@item timeout=@var{microseconds}
Set raise error timeout, expressed in microseconds.
If enabled, listen for connections on the provided port, and assume
the server role in the handshake instead of the client role.
+@item http_proxy
+The HTTP proxy to tunnel through, e.g. @code{http://example.com:1234}.
+The proxy must support the CONNECT method.
+
@end table
Example command lines: