/***************************************************-*- coding: iso-8859-1 -*-
* ratecontrol.c: h264 encoder library (Rate Control)
*****************************************************************************
- * Copyright (C) 2005 x264 project
- * $Id: ratecontrol.c,v 1.1 2004/06/03 19:27:08 fenrir Exp $
+ * Copyright (C) 2005-2008 x264 project
*
* Authors: Loren Merritt <lorenm@u.washington.edu>
* Michael Niedermayer <michaelni@gmx.at>
+ * Gabriel Bouvigne <gabriel.bouvigne@joost.com>
+ * Fiona Glaser <fiona@x264.com>
* Måns Rullgård <mru@mru.ath.cx>
*
* This program is free software; you can redistribute it and/or modify
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111, USA.
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02111, USA.
*****************************************************************************/
#define _ISOC99_SOURCE
#undef NDEBUG // always check asserts, the speed effect is far too small to disable them
-#include <stdlib.h>
-#include <stdio.h>
-#include <string.h>
#include <math.h>
-#include <limits.h>
-#include <assert.h>
#include "common/common.h"
#include "common/cpu.h"
#include "ratecontrol.h"
-
-#if defined(SYS_FREEBSD) || defined(SYS_BEOS) || defined(SYS_NETBSD)
-#define exp2f(x) powf( 2, (x) )
-#endif
-#if defined(_MSC_VER) || defined(SYS_SunOS)
-#define exp2f(x) pow( 2, (x) )
-#define sqrtf sqrt
-#endif
-#ifdef WIN32 // POSIX says that rename() removes the destination, but win32 doesn't.
-#define rename(src,dst) (unlink(dst), rename(src,dst))
-#endif
+#include "me.h"
typedef struct
{
int kept_as_ref;
float qscale;
int mv_bits;
- int i_tex_bits;
- int p_tex_bits;
+ int tex_bits;
int misc_bits;
- uint64_t expected_bits;
+ uint64_t expected_bits; /*total expected bits up to the current frame (current one excluded)*/
+ double expected_vbv;
float new_qscale;
int new_qp;
int i_count;
int p_count;
int s_count;
float blurred_complexity;
+ char direct_mode;
+ int refcount[16];
+ int refs;
} ratecontrol_entry_t;
typedef struct
double coeff;
double count;
double decay;
+ double offset;
} predictor_t;
struct x264_ratecontrol_t
/* constants */
int b_abr;
int b_2pass;
+ int b_vbv;
+ int b_vbv_min_rate;
double fps;
double bitrate;
double rate_tolerance;
+ double qcompress;
int nmb; /* number of macroblocks in a frame */
int qp_constant[5];
/* current frame */
ratecontrol_entry_t *rce;
int qp; /* qp for current frame */
- float qpa; /* average of macroblocks' qp (same as qp if no adaptive quant) */
- int slice_type;
+ int qpm; /* qp for current macroblock */
+ float f_qpm; /* qp for current macroblock: precise float for AQ */
+ float qpa_rc; /* average of macroblocks' qp before aq */
+ float qpa_aq; /* average of macroblocks' qp after aq */
+ float qp_novbv; /* QP for the current frame if 1-pass VBV was disabled. */
int qp_force;
/* VBV stuff */
double buffer_size;
- double buffer_fill;
+ double buffer_fill_final; /* real buffer as of the last finished frame */
+ double buffer_fill; /* planned buffer, if all in-progress frames hit their bit budget */
double buffer_rate; /* # of bits added to buffer_fill after each frame */
- predictor_t pred[5]; /* predict frame size from satd */
+ predictor_t *pred; /* predict frame size from satd */
+ int single_frame_vbv;
/* ABR stuff */
int last_satd;
double last_rceq;
double cplxr_sum; /* sum of bits*qscale/rceq */
- double expected_bits_sum; /* sum of qscale2bits after rceq, ratefactor, and overflow */
+ double expected_bits_sum; /* sum of qscale2bits after rceq, ratefactor, and overflow, only includes finished frames */
double wanted_bits_window; /* target bitrate * window */
double cbr_decay;
double short_term_cplxsum;
double short_term_cplxcount;
double rate_factor_constant;
+ double ip_offset;
+ double pb_offset;
/* 2pass stuff */
FILE *p_stat_file_out;
char *psz_stat_file_tmpname;
+ FILE *p_mbtree_stat_file_out;
+ char *psz_mbtree_stat_file_tmpname;
+ char *psz_mbtree_stat_file_name;
+ FILE *p_mbtree_stat_file_in;
int num_entries; /* number of ratecontrol_entry_ts */
ratecontrol_entry_t *entry; /* FIXME: copy needed data and free this once init is done */
double lmin[5]; /* min qscale by frame type */
double lmax[5];
double lstep; /* max change (multiply) in qscale per frame */
- double i_cplx_sum[5]; /* estimated total texture bits in intra MBs at qscale=1 */
- double p_cplx_sum[5];
- double mv_bits_sum[5];
- int frame_count[5]; /* number of frames of each type */
+ uint16_t *qp_buffer; /* Global buffer for converting MB-tree quantizer data. */
+
+ /* MBRC stuff */
+ double frame_size_estimated;
+ double frame_size_planned;
+ predictor_t (*row_pred)[2];
+ predictor_t row_preds[5][2];
+ predictor_t *pred_b_from_p; /* predict B-frame size from P-frame satd */
+ int bframes; /* # consecutive B-frames before this P-frame */
+ int bframe_bits; /* total cost of those frames */
int i_zones;
x264_zone_t *zones;
+ x264_zone_t *prev_zone;
};
static int parse_zones( x264_t *h );
static int init_pass2(x264_t *);
-static float rate_estimate_qscale( x264_t *h, int pict_type );
+static float rate_estimate_qscale( x264_t *h );
static void update_vbv( x264_t *h, int bits );
-int x264_rc_analyse_slice( x264_t *h );
+static void update_vbv_plan( x264_t *h, int overhead );
+static double predict_size( predictor_t *p, double q, double var );
+static void update_predictor( predictor_t *p, double q, double var, double bits );
/* Terminology:
* qp = h.264's quantizer
{
if(qscale<0.1)
qscale = 0.1;
- return (rce->i_tex_bits + rce->p_tex_bits + .1) * pow( rce->qscale / qscale, 1.1 )
- + rce->mv_bits * pow( X264_MAX(rce->qscale, 12) / X264_MAX(qscale, 12), 0.5 );
+ return (rce->tex_bits + .1) * pow( rce->qscale / qscale, 1.1 )
+ + rce->mv_bits * pow( X264_MAX(rce->qscale, 1) / X264_MAX(qscale, 1), 0.5 )
+ + rce->misc_bits;
+}
+
+// Find the total AC energy of the block in all planes.
+static NOINLINE uint32_t ac_energy_mb( x264_t *h, int mb_x, int mb_y, x264_frame_t *frame )
+{
+ /* This function contains annoying hacks because GCC has a habit of reordering emms
+ * and putting it after floating point ops. As a result, we put the emms at the end of the
+ * function and make sure that its always called before the float math. Noinline makes
+ * sure no reordering goes on. */
+ uint32_t var = 0, i;
+ for( i = 0; i < 3; i++ )
+ {
+ int w = i ? 8 : 16;
+ int stride = frame->i_stride[i];
+ int offset = h->mb.b_interlaced
+ ? w * (mb_x + (mb_y&~1) * stride) + (mb_y&1) * stride
+ : w * (mb_x + mb_y * stride);
+ int pix = i ? PIXEL_8x8 : PIXEL_16x16;
+ stride <<= h->mb.b_interlaced;
+ var += h->pixf.var[pix]( frame->plane[i]+offset, stride );
+ }
+ x264_emms();
+ return var;
+}
+
+void x264_adaptive_quant_frame( x264_t *h, x264_frame_t *frame )
+{
+ /* constants chosen to result in approximately the same overall bitrate as without AQ.
+ * FIXME: while they're written in 5 significant digits, they're only tuned to 2. */
+ int mb_x, mb_y;
+ float strength;
+ float avg_adj = 0.f;
+ /* Need to init it anyways for MB tree. */
+ if( h->param.rc.f_aq_strength == 0 )
+ {
+ int mb_xy;
+ memset( frame->f_qp_offset, 0, h->mb.i_mb_count * sizeof(float) );
+ memset( frame->f_qp_offset_aq, 0, h->mb.i_mb_count * sizeof(float) );
+ if( h->frames.b_have_lowres )
+ for( mb_xy = 0; mb_xy < h->mb.i_mb_count; mb_xy++ )
+ frame->i_inv_qscale_factor[mb_xy] = 256;
+ return;
+ }
+
+ if( h->param.rc.i_aq_mode == X264_AQ_AUTOVARIANCE )
+ {
+ for( mb_y = 0; mb_y < h->sps->i_mb_height; mb_y++ )
+ for( mb_x = 0; mb_x < h->sps->i_mb_width; mb_x++ )
+ {
+ uint32_t energy = ac_energy_mb( h, mb_x, mb_y, frame );
+ float qp_adj = x264_log2( energy + 2 );
+ qp_adj *= qp_adj;
+ frame->f_qp_offset[mb_x + mb_y*h->mb.i_mb_stride] = qp_adj;
+ avg_adj += qp_adj;
+ }
+ avg_adj /= h->mb.i_mb_count;
+ strength = h->param.rc.f_aq_strength * avg_adj * (1.f / 6000.f);
+ }
+ else
+ strength = h->param.rc.f_aq_strength * 1.0397f;
+
+ for( mb_y = 0; mb_y < h->sps->i_mb_height; mb_y++ )
+ for( mb_x = 0; mb_x < h->sps->i_mb_width; mb_x++ )
+ {
+ float qp_adj;
+ if( h->param.rc.i_aq_mode == X264_AQ_AUTOVARIANCE )
+ {
+ qp_adj = frame->f_qp_offset[mb_x + mb_y*h->mb.i_mb_stride];
+ qp_adj = strength * (qp_adj - avg_adj);
+ }
+ else
+ {
+ uint32_t energy = ac_energy_mb( h, mb_x, mb_y, frame );
+ qp_adj = strength * (x264_log2( X264_MAX(energy, 1) ) - 14.427f);
+ }
+ frame->f_qp_offset[mb_x + mb_y*h->mb.i_mb_stride] =
+ frame->f_qp_offset_aq[mb_x + mb_y*h->mb.i_mb_stride] = qp_adj;
+ if( h->frames.b_have_lowres )
+ frame->i_inv_qscale_factor[mb_x + mb_y*h->mb.i_mb_stride] = x264_exp2fix8(qp_adj);
+ }
+}
+
+
+/*****************************************************************************
+* x264_adaptive_quant:
+ * adjust macroblock QP based on variance (AC energy) of the MB.
+ * high variance = higher QP
+ * low variance = lower QP
+ * This generally increases SSIM and lowers PSNR.
+*****************************************************************************/
+void x264_adaptive_quant( x264_t *h )
+{
+ x264_emms();
+ h->mb.i_qp = x264_clip3( h->rc->f_qpm + h->fenc->f_qp_offset[h->mb.i_mb_xy] + .5, h->param.rc.i_qp_min, h->param.rc.i_qp_max );
+}
+
+int x264_macroblock_tree_read( x264_t *h, x264_frame_t *frame )
+{
+ x264_ratecontrol_t *rc = h->rc;
+ uint8_t i_type_actual = rc->entry[frame->i_frame].pict_type;
+ int i;
+
+ if( i_type_actual != SLICE_TYPE_B )
+ {
+ uint8_t i_type;
+
+ if( !fread( &i_type, 1, 1, rc->p_mbtree_stat_file_in ) )
+ goto fail;
+
+ if( i_type != i_type_actual )
+ {
+ x264_log(h, X264_LOG_ERROR, "MB-tree frametype %d doesn't match actual frametype %d.\n", i_type,i_type_actual);
+ return -1;
+ }
+
+ if( fread( rc->qp_buffer, sizeof(uint16_t), h->mb.i_mb_count, rc->p_mbtree_stat_file_in ) != h->mb.i_mb_count )
+ goto fail;
+
+ for( i = 0; i < h->mb.i_mb_count; i++ )
+ {
+ frame->f_qp_offset[i] = ((float)(int16_t)endian_fix16( rc->qp_buffer[i] )) * (1/256.0);
+ if( h->frames.b_have_lowres )
+ frame->i_inv_qscale_factor[i] = x264_exp2fix8(frame->f_qp_offset[i]);
+ }
+ }
+ else
+ x264_adaptive_quant_frame( h, frame );
+ return 0;
+fail:
+ x264_log(h, X264_LOG_ERROR, "Incomplete MB-tree stats file.\n");
+ return -1;
+}
+
+int x264_reference_build_list_optimal( x264_t *h )
+{
+ ratecontrol_entry_t *rce = h->rc->rce;
+ x264_frame_t *frames[16];
+ int ref, i;
+
+ if( rce->refs != h->i_ref0 )
+ return -1;
+
+ memcpy( frames, h->fref0, sizeof(frames) );
+
+ /* For now don't reorder ref 0; it seems to lower quality
+ in most cases due to skips. */
+ for( ref = 1; ref < h->i_ref0; ref++ )
+ {
+ int max = -1;
+ int bestref = 1;
+ for( i = 1; i < h->i_ref0; i++ )
+ /* Favor lower POC as a tiebreaker. */
+ COPY2_IF_GT( max, rce->refcount[i], bestref, i );
+ rce->refcount[bestref] = -1;
+ h->fref0[ref] = frames[bestref];
+ }
+
+ return 0;
}
+static char *x264_strcat_filename( char *input, char *suffix )
+{
+ char *output = x264_malloc( strlen( input ) + strlen( suffix ) + 1 );
+ if( !output )
+ return NULL;
+ strcpy( output, input );
+ strcat( output, suffix );
+ return output;
+}
int x264_ratecontrol_new( x264_t *h )
{
x264_ratecontrol_t *rc;
- int i;
+ int i, j;
- x264_cpu_restore( h->param.cpu );
+ x264_emms();
- h->rc = rc = x264_malloc( sizeof( x264_ratecontrol_t ) );
- memset(rc, 0, sizeof(*rc));
+ CHECKED_MALLOCZERO( h->rc, h->param.i_threads * sizeof(x264_ratecontrol_t) );
+ rc = h->rc;
+
+ rc->b_abr = h->param.rc.i_rc_method != X264_RC_CQP && !h->param.rc.b_stat_read;
+ rc->b_2pass = h->param.rc.i_rc_method == X264_RC_ABR && h->param.rc.b_stat_read;
- rc->b_abr = ( h->param.rc.b_cbr || h->param.rc.i_rf_constant ) && !h->param.rc.b_stat_read;
- rc->b_2pass = h->param.rc.b_cbr && h->param.rc.b_stat_read;
- h->mb.b_variable_qp = 0;
-
/* FIXME: use integers */
if(h->param.i_fps_num > 0 && h->param.i_fps_den > 0)
rc->fps = (float) h->param.i_fps_num / h->param.i_fps_den;
else
rc->fps = 25.0;
- rc->bitrate = h->param.rc.i_bitrate * 1000;
+ if( h->param.rc.b_mb_tree )
+ {
+ h->param.rc.f_pb_factor = 1;
+ rc->qcompress = 1;
+ }
+ else
+ rc->qcompress = h->param.rc.f_qcompress;
+
+ rc->bitrate = h->param.rc.i_bitrate * 1000.;
rc->rate_tolerance = h->param.rc.f_rate_tolerance;
rc->nmb = h->mb.i_mb_count;
rc->last_non_b_pict_type = -1;
rc->cbr_decay = 1.0;
- if( rc->b_2pass && h->param.rc.i_rf_constant )
+ if( h->param.rc.i_rc_method == X264_RC_CRF && h->param.rc.b_stat_read )
+ {
x264_log(h, X264_LOG_ERROR, "constant rate-factor is incompatible with 2pass.\n");
+ return -1;
+ }
+ if( h->param.rc.i_vbv_buffer_size )
+ {
+ if( h->param.rc.i_rc_method == X264_RC_CQP )
+ {
+ x264_log(h, X264_LOG_WARNING, "VBV is incompatible with constant QP, ignored.\n");
+ h->param.rc.i_vbv_max_bitrate = 0;
+ h->param.rc.i_vbv_buffer_size = 0;
+ }
+ else if( h->param.rc.i_vbv_max_bitrate == 0 )
+ {
+ x264_log( h, X264_LOG_DEBUG, "VBV maxrate unspecified, assuming CBR\n" );
+ h->param.rc.i_vbv_max_bitrate = h->param.rc.i_bitrate;
+ }
+ }
if( h->param.rc.i_vbv_max_bitrate < h->param.rc.i_bitrate &&
h->param.rc.i_vbv_max_bitrate > 0)
- x264_log(h, X264_LOG_ERROR, "max bitrate less than average bitrate, ignored.\n");
+ x264_log(h, X264_LOG_WARNING, "max bitrate less than average bitrate, ignored.\n");
else if( h->param.rc.i_vbv_max_bitrate > 0 &&
h->param.rc.i_vbv_buffer_size > 0 )
{
- if( h->param.rc.i_vbv_buffer_size < 10 * h->param.rc.i_vbv_max_bitrate / rc->fps ) {
- h->param.rc.i_vbv_buffer_size = 10 * h->param.rc.i_vbv_max_bitrate / rc->fps;
- x264_log( h, X264_LOG_ERROR, "VBV buffer size too small, using %d kbit\n",
+ if( h->param.rc.i_vbv_buffer_size < (int)(h->param.rc.i_vbv_max_bitrate / rc->fps) )
+ {
+ h->param.rc.i_vbv_buffer_size = h->param.rc.i_vbv_max_bitrate / rc->fps;
+ x264_log( h, X264_LOG_WARNING, "VBV buffer size cannot be smaller than one frame, using %d kbit\n",
h->param.rc.i_vbv_buffer_size );
}
- rc->buffer_rate = h->param.rc.i_vbv_max_bitrate * 1000 / rc->fps;
- rc->buffer_size = h->param.rc.i_vbv_buffer_size * 1000;
- rc->buffer_fill = rc->buffer_size * h->param.rc.f_vbv_buffer_init;
+ if( h->param.rc.f_vbv_buffer_init > 1. )
+ h->param.rc.f_vbv_buffer_init = x264_clip3f( h->param.rc.f_vbv_buffer_init / h->param.rc.i_vbv_buffer_size, 0, 1 );
+ rc->buffer_rate = h->param.rc.i_vbv_max_bitrate * 1000. / rc->fps;
+ rc->buffer_size = h->param.rc.i_vbv_buffer_size * 1000.;
+ rc->single_frame_vbv = rc->buffer_rate * 1.1 > rc->buffer_size;
+ h->param.rc.f_vbv_buffer_init = X264_MAX( h->param.rc.f_vbv_buffer_init, rc->buffer_rate / rc->buffer_size );
+ rc->buffer_fill_final = rc->buffer_size * h->param.rc.f_vbv_buffer_init;
rc->cbr_decay = 1.0 - rc->buffer_rate / rc->buffer_size
* 0.5 * X264_MAX(0, 1.5 - rc->buffer_rate * rc->fps / rc->bitrate);
+ rc->b_vbv = 1;
+ rc->b_vbv_min_rate = !rc->b_2pass
+ && h->param.rc.i_rc_method == X264_RC_ABR
+ && h->param.rc.i_vbv_max_bitrate <= h->param.rc.i_bitrate;
}
- else if( h->param.rc.i_vbv_max_bitrate || h->param.rc.i_vbv_buffer_size )
- x264_log(h, X264_LOG_ERROR, "VBV maxrate or buffer size specified, but not both.\n");
- if(rc->rate_tolerance < 0.01) {
- x264_log(h, X264_LOG_ERROR, "bitrate tolerance too small, using .01\n");
+ else if( h->param.rc.i_vbv_max_bitrate )
+ {
+ x264_log(h, X264_LOG_WARNING, "VBV maxrate specified, but no bufsize.\n");
+ h->param.rc.i_vbv_max_bitrate = 0;
+ }
+ if(rc->rate_tolerance < 0.01)
+ {
+ x264_log(h, X264_LOG_WARNING, "bitrate tolerance too small, using .01\n");
rc->rate_tolerance = 0.01;
}
+ h->mb.b_variable_qp = rc->b_vbv || h->param.rc.i_aq_mode;
+
if( rc->b_abr )
{
- /* FIXME shouldn't need to arbitrarily specify a QP,
- * but this is more robust than BPP measures */
-#define ABR_INIT_QP ( h->param.rc.i_rf_constant > 0 ? h->param.rc.i_rf_constant : 24 )
+ /* FIXME ABR_INIT_QP is actually used only in CRF */
+#define ABR_INIT_QP ( h->param.rc.i_rc_method == X264_RC_CRF ? h->param.rc.f_rf_constant : 24 )
rc->accum_p_norm = .01;
rc->accum_p_qp = ABR_INIT_QP * rc->accum_p_norm;
- rc->cplxr_sum = .01;
- rc->wanted_bits_window = .01;
+ /* estimated ratio that produces a reasonable QP for the first I-frame */
+ rc->cplxr_sum = .01 * pow( 7.0e5, rc->qcompress ) * pow( h->mb.i_mb_count, 0.5 );
+ rc->wanted_bits_window = 1.0 * rc->bitrate / rc->fps;
+ rc->last_non_b_pict_type = SLICE_TYPE_I;
}
- if( h->param.rc.i_rf_constant )
+ if( h->param.rc.i_rc_method == X264_RC_CRF )
{
- /* arbitrary rescaling to make CRF somewhat similar to QP */
+ /* Arbitrary rescaling to make CRF somewhat similar to QP.
+ * Try to compensate for MB-tree's effects as well. */
double base_cplx = h->mb.i_mb_count * (h->param.i_bframe ? 120 : 80);
- rc->rate_factor_constant = pow( base_cplx, 1 - h->param.rc.f_qcompress )
- / qp2qscale( h->param.rc.i_rf_constant );
+ double mbtree_offset = h->param.rc.b_mb_tree ? (1.0-h->param.rc.f_qcompress)*13.5 : 0;
+ rc->rate_factor_constant = pow( base_cplx, 1 - rc->qcompress )
+ / qp2qscale( h->param.rc.f_rf_constant + mbtree_offset );
}
+ rc->ip_offset = 6.0 * log(h->param.rc.f_ip_factor) / log(2.0);
+ rc->pb_offset = 6.0 * log(h->param.rc.f_pb_factor) / log(2.0);
rc->qp_constant[SLICE_TYPE_P] = h->param.rc.i_qp_constant;
- rc->qp_constant[SLICE_TYPE_I] = x264_clip3( (int)( qscale2qp( qp2qscale( h->param.rc.i_qp_constant ) / fabs( h->param.rc.f_ip_factor )) + 0.5 ), 0, 51 );
- rc->qp_constant[SLICE_TYPE_B] = x264_clip3( (int)( qscale2qp( qp2qscale( h->param.rc.i_qp_constant ) * fabs( h->param.rc.f_pb_factor )) + 0.5 ), 0, 51 );
+ rc->qp_constant[SLICE_TYPE_I] = x264_clip3( h->param.rc.i_qp_constant - rc->ip_offset + 0.5, 0, 51 );
+ rc->qp_constant[SLICE_TYPE_B] = x264_clip3( h->param.rc.i_qp_constant + rc->pb_offset + 0.5, 0, 51 );
- rc->lstep = exp2f(h->param.rc.i_qp_step / 6.0);
+ rc->lstep = pow( 2, h->param.rc.i_qp_step / 6.0 );
rc->last_qscale = qp2qscale(26);
+ CHECKED_MALLOC( rc->pred, 5*sizeof(predictor_t) );
+ CHECKED_MALLOC( rc->pred_b_from_p, sizeof(predictor_t) );
for( i = 0; i < 5; i++ )
{
- rc->last_qscale_for[i] = qp2qscale(26);
+ rc->last_qscale_for[i] = qp2qscale( ABR_INIT_QP );
rc->lmin[i] = qp2qscale( h->param.rc.i_qp_min );
rc->lmax[i] = qp2qscale( h->param.rc.i_qp_max );
rc->pred[i].coeff= 2.0;
rc->pred[i].count= 1.0;
rc->pred[i].decay= 0.5;
+ rc->pred[i].offset= 0.0;
+ for( j = 0; j < 2; j++ )
+ {
+ rc->row_preds[i][j].coeff= .25;
+ rc->row_preds[i][j].count= 1.0;
+ rc->row_preds[i][j].decay= 0.5;
+ rc->row_preds[i][j].offset= 0.0;
+ }
}
+ *rc->pred_b_from_p = rc->pred[0];
if( parse_zones( h ) < 0 )
+ {
+ x264_log( h, X264_LOG_ERROR, "failed to parse zones\n" );
return -1;
+ }
/* Load stat file and init 2pass algo */
if( h->param.rc.b_stat_read )
{
- char *p, *stats_in;
+ char *p, *stats_in, *stats_buf;
/* read 1st pass stats */
assert( h->param.rc.psz_stat_in );
- stats_in = x264_slurp_file( h->param.rc.psz_stat_in );
- if( !stats_in )
+ stats_buf = stats_in = x264_slurp_file( h->param.rc.psz_stat_in );
+ if( !stats_buf )
{
x264_log(h, X264_LOG_ERROR, "ratecontrol_init: can't open stats file\n");
return -1;
}
+ if( h->param.rc.b_mb_tree )
+ {
+ char *mbtree_stats_in = x264_strcat_filename( h->param.rc.psz_stat_in, ".mbtree" );
+ if( !mbtree_stats_in )
+ return -1;
+ rc->p_mbtree_stat_file_in = fopen( mbtree_stats_in, "rb" );
+ x264_free( mbtree_stats_in );
+ if( !rc->p_mbtree_stat_file_in )
+ {
+ x264_log(h, X264_LOG_ERROR, "ratecontrol_init: can't open mbtree stats file\n");
+ return -1;
+ }
+ }
+
+ /* check whether 1st pass options were compatible with current options */
+ if( !strncmp( stats_buf, "#options:", 9 ) )
+ {
+ int i;
+ char *opts = stats_buf;
+ stats_in = strchr( stats_buf, '\n' );
+ if( !stats_in )
+ return -1;
+ *stats_in = '\0';
+ stats_in++;
+
+ if( ( p = strstr( opts, "bframes=" ) ) && sscanf( p, "bframes=%d", &i )
+ && h->param.i_bframe != i )
+ {
+ x264_log( h, X264_LOG_ERROR, "different number of B-frames than 1st pass (%d vs %d)\n",
+ h->param.i_bframe, i );
+ return -1;
+ }
+
+ /* since B-adapt doesn't (yet) take into account B-pyramid,
+ * the converse is not a problem */
+ if( strstr( opts, "b_pyramid=1" ) && !h->param.b_bframe_pyramid )
+ x264_log( h, X264_LOG_WARNING, "1st pass used B-pyramid, 2nd doesn't\n" );
+
+ if( ( p = strstr( opts, "keyint=" ) ) && sscanf( p, "keyint=%d", &i )
+ && h->param.i_keyint_max != i )
+ x264_log( h, X264_LOG_WARNING, "different keyint than 1st pass (%d vs %d)\n",
+ h->param.i_keyint_max, i );
+
+ if( strstr( opts, "qp=0" ) && h->param.rc.i_rc_method == X264_RC_ABR )
+ x264_log( h, X264_LOG_WARNING, "1st pass was lossless, bitrate prediction will be inaccurate\n" );
+
+ if( !strstr( opts, "direct=3" ) && h->param.analyse.i_direct_mv_pred == X264_DIRECT_PRED_AUTO )
+ {
+ x264_log( h, X264_LOG_WARNING, "direct=auto not used on the first pass\n" );
+ h->mb.b_direct_auto_write = 1;
+ }
+
+ if( ( p = strstr( opts, "b_adapt=" ) ) && sscanf( p, "b_adapt=%d", &i ) && i >= X264_B_ADAPT_NONE && i <= X264_B_ADAPT_TRELLIS )
+ h->param.i_bframe_adaptive = i;
+ else if( h->param.i_bframe )
+ {
+ x264_log( h, X264_LOG_ERROR, "b_adapt method specified in stats file not valid\n" );
+ return -1;
+ }
+
+ if( h->param.rc.b_mb_tree && ( p = strstr( opts, "rc_lookahead=" ) ) && sscanf( p, "rc_lookahead=%d", &i ) )
+ h->param.rc.i_lookahead = i;
+ }
/* find number of pics */
p = stats_in;
x264_log( h, X264_LOG_WARNING, "2nd pass has fewer frames than 1st pass (%d vs %d)\n",
h->param.i_frame_total, rc->num_entries );
}
- if( h->param.i_frame_total > rc->num_entries + h->param.i_bframe )
+ if( h->param.i_frame_total > rc->num_entries )
{
x264_log( h, X264_LOG_ERROR, "2nd pass has more frames than 1st pass (%d vs %d)\n",
h->param.i_frame_total, rc->num_entries );
return -1;
}
- /* FIXME: ugly padding because VfW drops delayed B-frames */
- rc->num_entries += h->param.i_bframe;
-
- rc->entry = (ratecontrol_entry_t*) x264_malloc(rc->num_entries * sizeof(ratecontrol_entry_t));
- memset(rc->entry, 0, rc->num_entries * sizeof(ratecontrol_entry_t));
+ CHECKED_MALLOCZERO( rc->entry, rc->num_entries * sizeof(ratecontrol_entry_t) );
/* init all to skipped p frames */
- for(i=0; i<rc->num_entries; i++){
+ for(i=0; i<rc->num_entries; i++)
+ {
ratecontrol_entry_t *rce = &rc->entry[i];
rce->pict_type = SLICE_TYPE_P;
rce->qscale = rce->new_qscale = qp2qscale(20);
/* read stats */
p = stats_in;
- for(i=0; i < rc->num_entries - h->param.i_bframe; i++){
+ for(i=0; i < rc->num_entries; i++)
+ {
ratecontrol_entry_t *rce;
int frame_number;
char pict_type;
int e;
char *next;
float qp;
+ int ref;
next= strchr(p, ';');
- if(next){
- (*next)=0; //sscanf is unbelievably slow on looong strings
+ if(next)
+ {
+ (*next)=0; //sscanf is unbelievably slow on long strings
next++;
}
e = sscanf(p, " in:%d ", &frame_number);
return -1;
}
rce = &rc->entry[frame_number];
+ rce->direct_mode = 0;
+
+ e += sscanf(p, " in:%*d out:%*d type:%c q:%f tex:%d mv:%d misc:%d imb:%d pmb:%d smb:%d d:%c",
+ &pict_type, &qp, &rce->tex_bits,
+ &rce->mv_bits, &rce->misc_bits, &rce->i_count, &rce->p_count,
+ &rce->s_count, &rce->direct_mode);
+
+ p = strstr( p, "ref:" );
+ if( !p )
+ goto parse_error;
+ p += 4;
+ for( ref = 0; ref < 16; ref++ )
+ {
+ if( sscanf( p, " %d", &rce->refcount[ref] ) != 1 )
+ break;
+ p = strchr( p+1, ' ' );
+ if( !p )
+ goto parse_error;
+ }
+ rce->refs = ref;
- e += sscanf(p, " in:%*d out:%*d type:%c q:%f itex:%d ptex:%d mv:%d misc:%d imb:%d pmb:%d smb:%d",
- &pict_type, &qp, &rce->i_tex_bits, &rce->p_tex_bits,
- &rce->mv_bits, &rce->misc_bits, &rce->i_count, &rce->p_count, &rce->s_count);
-
- switch(pict_type){
+ switch(pict_type)
+ {
case 'I': rce->kept_as_ref = 1;
case 'i': rce->pict_type = SLICE_TYPE_I; break;
case 'P': rce->pict_type = SLICE_TYPE_P; break;
case 'b': rce->pict_type = SLICE_TYPE_B; break;
default: e = -1; break;
}
- if(e != 10){
+ if(e < 10)
+ {
+parse_error:
x264_log(h, X264_LOG_ERROR, "statistics are damaged at line %d, parser out=%d\n", i, e);
return -1;
}
p = next;
}
- x264_free(stats_in);
+ x264_free(stats_buf);
- if(h->param.rc.b_cbr)
+ if(h->param.rc.i_rc_method == X264_RC_ABR)
{
if(init_pass2(h) < 0) return -1;
} /* else we're using constant quant, so no need to run the bitrate allocation */
* and move it to the real name only when it's complete */
if( h->param.rc.b_stat_write )
{
- rc->psz_stat_file_tmpname = x264_malloc( strlen(h->param.rc.psz_stat_out) + 6 );
- strcpy( rc->psz_stat_file_tmpname, h->param.rc.psz_stat_out );
- strcat( rc->psz_stat_file_tmpname, ".temp" );
+ char *p;
+ rc->psz_stat_file_tmpname = x264_strcat_filename( h->param.rc.psz_stat_out, ".temp" );
+ if( !rc->psz_stat_file_tmpname )
+ return -1;
rc->p_stat_file_out = fopen( rc->psz_stat_file_tmpname, "wb" );
if( rc->p_stat_file_out == NULL )
x264_log(h, X264_LOG_ERROR, "ratecontrol_init: can't open stats file\n");
return -1;
}
+
+ p = x264_param2string( &h->param, 1 );
+ if( p )
+ fprintf( rc->p_stat_file_out, "#options: %s\n", p );
+ x264_free( p );
+ if( h->param.rc.b_mb_tree && !h->param.rc.b_stat_read )
+ {
+ rc->psz_mbtree_stat_file_tmpname = x264_strcat_filename( h->param.rc.psz_stat_out, ".mbtree.temp" );
+ rc->psz_mbtree_stat_file_name = x264_strcat_filename( h->param.rc.psz_stat_out, ".mbtree" );
+ if( !rc->psz_mbtree_stat_file_tmpname || !rc->psz_mbtree_stat_file_name )
+ return -1;
+
+ rc->p_mbtree_stat_file_out = fopen( rc->psz_mbtree_stat_file_tmpname, "wb" );
+ if( rc->p_mbtree_stat_file_out == NULL )
+ {
+ x264_log(h, X264_LOG_ERROR, "ratecontrol_init: can't open mbtree stats file\n");
+ return -1;
+ }
+ }
+ }
+
+ if( h->param.rc.b_mb_tree && (h->param.rc.b_stat_read || h->param.rc.b_stat_write) )
+ CHECKED_MALLOC( rc->qp_buffer, h->mb.i_mb_count * sizeof(uint16_t) );
+
+ for( i=0; i<h->param.i_threads; i++ )
+ {
+ h->thread[i]->rc = rc+i;
+ if( i )
+ {
+ rc[i] = rc[0];
+ memcpy( &h->thread[i]->param, &h->param, sizeof(x264_param_t) );
+ h->thread[i]->mb.b_variable_qp = h->mb.b_variable_qp;
+ }
}
return 0;
+fail:
+ return -1;
+}
+
+static int parse_zone( x264_t *h, x264_zone_t *z, char *p )
+{
+ int len = 0;
+ char *tok, UNUSED *saveptr;
+ z->param = NULL;
+ z->f_bitrate_factor = 1;
+ if( 3 <= sscanf(p, "%u,%u,q=%u%n", &z->i_start, &z->i_end, &z->i_qp, &len) )
+ z->b_force_qp = 1;
+ else if( 3 <= sscanf(p, "%u,%u,b=%f%n", &z->i_start, &z->i_end, &z->f_bitrate_factor, &len) )
+ z->b_force_qp = 0;
+ else if( 2 <= sscanf(p, "%u,%u%n", &z->i_start, &z->i_end, &len) )
+ z->b_force_qp = 0;
+ else
+ {
+ x264_log( h, X264_LOG_ERROR, "invalid zone: \"%s\"\n", p );
+ return -1;
+ }
+ p += len;
+ if( !*p )
+ return 0;
+ CHECKED_MALLOC( z->param, sizeof(x264_param_t) );
+ memcpy( z->param, &h->param, sizeof(x264_param_t) );
+ z->param->param_free = x264_free;
+ while( (tok = strtok_r( p, ",", &saveptr )) )
+ {
+ char *val = strchr( tok, '=' );
+ if( val )
+ {
+ *val = '\0';
+ val++;
+ }
+ if( x264_param_parse( z->param, tok, val ) )
+ {
+ x264_log( h, X264_LOG_ERROR, "invalid zone param: %s = %s\n", tok, val );
+ return -1;
+ }
+ p = NULL;
+ }
+ return 0;
+fail:
+ return -1;
}
static int parse_zones( x264_t *h )
int i;
if( h->param.rc.psz_zones && !h->param.rc.i_zones )
{
- char *p;
+ char *psz_zones, *p, *tok, UNUSED *saveptr;
+ CHECKED_MALLOC( psz_zones, strlen( h->param.rc.psz_zones )+1 );
+ strcpy( psz_zones, h->param.rc.psz_zones );
h->param.rc.i_zones = 1;
- for( p = h->param.rc.psz_zones; *p; p++ )
+ for( p = psz_zones; *p; p++ )
h->param.rc.i_zones += (*p == '/');
- h->param.rc.zones = x264_malloc( h->param.rc.i_zones * sizeof(x264_zone_t) );
- p = h->param.rc.psz_zones;
- for( i = 0; i < h->param.rc.i_zones; i++)
+ CHECKED_MALLOC( h->param.rc.zones, h->param.rc.i_zones * sizeof(x264_zone_t) );
+ p = psz_zones;
+ for( i = 0; i < h->param.rc.i_zones; i++ )
{
- x264_zone_t *z = &h->param.rc.zones[i];
- if( 3 == sscanf(p, "%u,%u,q=%u", &z->i_start, &z->i_end, &z->i_qp) )
- z->b_force_qp = 1;
- else if( 3 == sscanf(p, "%u,%u,b=%f", &z->i_start, &z->i_end, &z->f_bitrate_factor) )
- z->b_force_qp = 0;
- else
- {
- char *slash = strchr(p, '/');
- if(slash) *slash = '\0';
- x264_log( h, X264_LOG_ERROR, "invalid zone: \"%s\"\n", p );
+ tok = strtok_r( p, "/", &saveptr );
+ if( !tok || parse_zone( h, &h->param.rc.zones[i], tok ) )
return -1;
- }
- p = strchr(p, '/') + 1;
+ p = NULL;
}
+ x264_free( psz_zones );
}
if( h->param.rc.i_zones > 0 )
}
}
- rc->i_zones = h->param.rc.i_zones;
- rc->zones = x264_malloc( rc->i_zones * sizeof(x264_zone_t) );
- memcpy( rc->zones, h->param.rc.zones, rc->i_zones * sizeof(x264_zone_t) );
+ rc->i_zones = h->param.rc.i_zones + 1;
+ CHECKED_MALLOC( rc->zones, rc->i_zones * sizeof(x264_zone_t) );
+ memcpy( rc->zones+1, h->param.rc.zones, (rc->i_zones-1) * sizeof(x264_zone_t) );
+
+ // default zone to fall back to if none of the others match
+ rc->zones[0].i_start = 0;
+ rc->zones[0].i_end = INT_MAX;
+ rc->zones[0].b_force_qp = 0;
+ rc->zones[0].f_bitrate_factor = 1;
+ CHECKED_MALLOC( rc->zones[0].param, sizeof(x264_param_t) );
+ memcpy( rc->zones[0].param, &h->param, sizeof(x264_param_t) );
+ for( i = 1; i < rc->i_zones; i++ )
+ {
+ if( !rc->zones[i].param )
+ rc->zones[i].param = rc->zones[0].param;
+ }
}
return 0;
+fail:
+ return -1;
+}
+
+static x264_zone_t *get_zone( x264_t *h, int frame_num )
+{
+ int i;
+ for( i = h->rc->i_zones-1; i >= 0; i-- )
+ {
+ x264_zone_t *z = &h->rc->zones[i];
+ if( frame_num >= z->i_start && frame_num <= z->i_end )
+ return z;
+ }
+ return NULL;
+}
+
+void x264_ratecontrol_summary( x264_t *h )
+{
+ x264_ratecontrol_t *rc = h->rc;
+ if( rc->b_abr && h->param.rc.i_rc_method == X264_RC_ABR && rc->cbr_decay > .9999 )
+ {
+ double base_cplx = h->mb.i_mb_count * (h->param.i_bframe ? 120 : 80);
+ double mbtree_offset = h->param.rc.b_mb_tree ? (1.0-h->param.rc.f_qcompress)*13.5 : 0;
+ x264_log( h, X264_LOG_INFO, "final ratefactor: %.2f\n",
+ qscale2qp( pow( base_cplx, 1 - rc->qcompress )
+ * rc->cplxr_sum / rc->wanted_bits_window ) - mbtree_offset );
+ }
}
void x264_ratecontrol_delete( x264_t *h )
{
x264_ratecontrol_t *rc = h->rc;
+ int i;
if( rc->p_stat_file_out )
{
fclose( rc->p_stat_file_out );
- if( h->i_frame >= rc->num_entries - h->param.i_bframe )
+ if( h->i_frame >= rc->num_entries )
if( rename( rc->psz_stat_file_tmpname, h->param.rc.psz_stat_out ) != 0 )
{
x264_log( h, X264_LOG_ERROR, "failed to rename \"%s\" to \"%s\"\n",
}
x264_free( rc->psz_stat_file_tmpname );
}
+ if( rc->p_mbtree_stat_file_out )
+ {
+ fclose( rc->p_mbtree_stat_file_out );
+ if( h->i_frame >= rc->num_entries )
+ if( rename( rc->psz_mbtree_stat_file_tmpname, rc->psz_mbtree_stat_file_name ) != 0 )
+ {
+ x264_log( h, X264_LOG_ERROR, "failed to rename \"%s\" to \"%s\"\n",
+ rc->psz_mbtree_stat_file_tmpname, rc->psz_mbtree_stat_file_name );
+ }
+ x264_free( rc->psz_mbtree_stat_file_tmpname );
+ x264_free( rc->psz_mbtree_stat_file_name );
+ }
+ if( rc->p_mbtree_stat_file_in )
+ fclose( rc->p_mbtree_stat_file_in );
+ x264_free( rc->pred );
+ x264_free( rc->pred_b_from_p );
x264_free( rc->entry );
- x264_free( rc->zones );
+ x264_free( rc->qp_buffer );
+ if( rc->zones )
+ {
+ x264_free( rc->zones[0].param );
+ for( i=1; i<rc->i_zones; i++ )
+ if( rc->zones[i].param != rc->zones[0].param && rc->zones[i].param->param_free )
+ rc->zones[i].param->param_free( rc->zones[i].param );
+ x264_free( rc->zones );
+ }
x264_free( rc );
}
+void x264_ratecontrol_set_estimated_size( x264_t *h, int bits )
+{
+ x264_pthread_mutex_lock( &h->fenc->mutex );
+ h->rc->frame_size_estimated = bits;
+ x264_pthread_mutex_unlock( &h->fenc->mutex );
+}
+
+int x264_ratecontrol_get_estimated_size( x264_t const *h)
+{
+ int size;
+ x264_pthread_mutex_lock( &h->fenc->mutex );
+ size = h->rc->frame_size_estimated;
+ x264_pthread_mutex_unlock( &h->fenc->mutex );
+ return size;
+}
+
+static void accum_p_qp_update( x264_t *h, float qp )
+{
+ x264_ratecontrol_t *rc = h->rc;
+ rc->accum_p_qp *= .95;
+ rc->accum_p_norm *= .95;
+ rc->accum_p_norm += 1;
+ if( h->sh.i_type == SLICE_TYPE_I )
+ rc->accum_p_qp += qp + rc->ip_offset;
+ else
+ rc->accum_p_qp += qp;
+}
+
/* Before encoding a frame, choose a QP for it */
-void x264_ratecontrol_start( x264_t *h, int i_slice_type, int i_force_qp )
+void x264_ratecontrol_start( x264_t *h, int i_force_qp, int overhead )
{
x264_ratecontrol_t *rc = h->rc;
+ ratecontrol_entry_t *rce = NULL;
+ x264_zone_t *zone = get_zone( h, h->fenc->i_frame );
+ float q;
- x264_cpu_restore( h->param.cpu );
+ x264_emms();
+
+ if( zone && (!rc->prev_zone || zone->param != rc->prev_zone->param) )
+ x264_encoder_reconfig( h, zone->param );
+ rc->prev_zone = zone;
rc->qp_force = i_force_qp;
- rc->slice_type = i_slice_type;
+
+ if( h->param.rc.b_stat_read )
+ {
+ int frame = h->fenc->i_frame;
+ assert( frame >= 0 && frame < rc->num_entries );
+ rce = h->rc->rce = &h->rc->entry[frame];
+
+ if( h->sh.i_type == SLICE_TYPE_B
+ && h->param.analyse.i_direct_mv_pred == X264_DIRECT_PRED_AUTO )
+ {
+ h->sh.b_direct_spatial_mv_pred = ( rce->direct_mode == 's' );
+ h->mb.b_direct_auto_read = ( rce->direct_mode == 's' || rce->direct_mode == 't' );
+ }
+ }
+
+ if( rc->b_vbv )
+ {
+ memset( h->fdec->i_row_bits, 0, h->sps->i_mb_height * sizeof(int) );
+ rc->row_pred = &rc->row_preds[h->sh.i_type];
+ update_vbv_plan( h, overhead );
+ }
+
+ if( h->sh.i_type != SLICE_TYPE_B )
+ rc->bframes = h->fenc->i_bframes;
if( i_force_qp )
{
- rc->qpa = rc->qp = i_force_qp - 1;
+ q = i_force_qp - 1;
}
else if( rc->b_abr )
{
- rc->qpa = rc->qp =
- x264_clip3( (int)(qscale2qp( rate_estimate_qscale( h, i_slice_type ) ) + .5), 0, 51 );
+ q = qscale2qp( rate_estimate_qscale( h ) );
}
else if( rc->b_2pass )
{
- int frame = h->fenc->i_frame;
- ratecontrol_entry_t *rce;
- assert( frame >= 0 && frame < rc->num_entries );
- rce = h->rc->rce = &h->rc->entry[frame];
-
- rce->new_qscale = rate_estimate_qscale( h, i_slice_type );
- rc->qpa = rc->qp = rce->new_qp =
- x264_clip3( (int)(qscale2qp(rce->new_qscale) + 0.5), 0, 51 );
+ rce->new_qscale = rate_estimate_qscale( h );
+ q = qscale2qp( rce->new_qscale );
}
else /* CQP */
{
- int q;
- if( i_slice_type == SLICE_TYPE_B && h->fdec->b_kept_as_ref )
+ if( h->sh.i_type == SLICE_TYPE_B && h->fdec->b_kept_as_ref )
q = ( rc->qp_constant[ SLICE_TYPE_B ] + rc->qp_constant[ SLICE_TYPE_P ] ) / 2;
else
- q = rc->qp_constant[ i_slice_type ];
- rc->qpa = rc->qp = q;
+ q = rc->qp_constant[ h->sh.i_type ];
+
+ if( zone )
+ {
+ if( zone->b_force_qp )
+ q += zone->i_qp - rc->qp_constant[SLICE_TYPE_P];
+ else
+ q -= 6*log(zone->f_bitrate_factor)/log(2);
+ }
+ }
+
+ q = x264_clip3f( q, h->param.rc.i_qp_min, h->param.rc.i_qp_max );
+
+ rc->qpa_rc =
+ rc->qpa_aq = 0;
+ h->fdec->f_qp_avg_rc =
+ h->fdec->f_qp_avg_aq =
+ rc->qpm =
+ rc->qp = x264_clip3( (int)(q + 0.5), 0, 51 );
+ rc->f_qpm = q;
+ if( rce )
+ rce->new_qp = rc->qp;
+
+ accum_p_qp_update( h, rc->qp );
+
+ if( h->sh.i_type != SLICE_TYPE_B )
+ rc->last_non_b_pict_type = h->sh.i_type;
+}
+
+static double predict_row_size( x264_t *h, int y, int qp )
+{
+ /* average between two predictors:
+ * absolute SATD, and scaled bit cost of the colocated row in the previous frame */
+ x264_ratecontrol_t *rc = h->rc;
+ double pred_s = predict_size( rc->row_pred[0], qp2qscale(qp), h->fdec->i_row_satd[y] );
+ double pred_t = 0;
+ if( h->sh.i_type == SLICE_TYPE_I || qp >= h->fref0[0]->i_row_qp[y] )
+ {
+ if( h->sh.i_type == SLICE_TYPE_P
+ && h->fref0[0]->i_type == h->fdec->i_type
+ && h->fref0[0]->i_row_satd[y] > 0
+ && (abs(h->fref0[0]->i_row_satd[y] - h->fdec->i_row_satd[y]) < h->fdec->i_row_satd[y]/2))
+ {
+ pred_t = h->fref0[0]->i_row_bits[y] * h->fdec->i_row_satd[y] / h->fref0[0]->i_row_satd[y]
+ * qp2qscale(h->fref0[0]->i_row_qp[y]) / qp2qscale(qp);
+ }
+ if( pred_t == 0 )
+ pred_t = pred_s;
+ return (pred_s + pred_t) / 2;
+ }
+ /* Our QP is lower than the reference! */
+ else
+ {
+ double newq = qp2qscale(qp);
+ double oldq = qp2qscale(h->fref0[0]->i_row_qp[y]);
+ double pred_intra = predict_size( rc->row_pred[1], (1 - newq / oldq) * newq, h->fdec->i_row_satds[0][0][y] );
+ /* Sum: better to overestimate than underestimate by using only one of the two predictors. */
+ return pred_intra + pred_s;
}
}
+static double row_bits_so_far( x264_t *h, int y )
+{
+ int i;
+ double bits = 0;
+ for( i = 0; i <= y; i++ )
+ bits += h->fdec->i_row_bits[i];
+ return bits;
+}
+
+static double predict_row_size_sum( x264_t *h, int y, int qp )
+{
+ int i;
+ double bits = row_bits_so_far(h, y);
+ for( i = y+1; i < h->sps->i_mb_height; i++ )
+ bits += predict_row_size( h, i, qp );
+ return bits;
+}
+
+
void x264_ratecontrol_mb( x264_t *h, int bits )
{
- /* currently no adaptive quant */
+ x264_ratecontrol_t *rc = h->rc;
+ const int y = h->mb.i_mb_y;
+
+ x264_emms();
+
+ h->fdec->i_row_bits[y] += bits;
+ rc->qpa_rc += rc->f_qpm;
+ rc->qpa_aq += h->mb.i_qp;
+
+ if( h->mb.i_mb_x != h->sps->i_mb_width - 1 || !rc->b_vbv )
+ return;
+
+ h->fdec->i_row_qp[y] = rc->qpm;
+
+ update_predictor( rc->row_pred[0], qp2qscale(rc->qpm), h->fdec->i_row_satd[y], h->fdec->i_row_bits[y] );
+ if( h->sh.i_type == SLICE_TYPE_P && rc->qpm < h->fref0[0]->i_row_qp[y] )
+ {
+ double newq = qp2qscale(rc->qpm);
+ double oldq = qp2qscale(h->fref0[0]->i_row_qp[y]);
+ update_predictor( rc->row_pred[1], (1 - newq / oldq) * newq, h->fdec->i_row_satds[0][0][y], h->fdec->i_row_bits[y] );
+ }
+
+ /* tweak quality based on difference from predicted size */
+ if( y < h->sps->i_mb_height-1 )
+ {
+ int prev_row_qp = h->fdec->i_row_qp[y];
+ int i_qp_max = X264_MIN( prev_row_qp + h->param.rc.i_qp_step, h->param.rc.i_qp_max );
+ int i_qp_min = X264_MAX( prev_row_qp - h->param.rc.i_qp_step, h->param.rc.i_qp_min );
+
+ /* B-frames shouldn't use lower QP than their reference frames. */
+ if( h->sh.i_type == SLICE_TYPE_B )
+ {
+ i_qp_min = X264_MAX( i_qp_min, X264_MAX( h->fref0[0]->i_row_qp[y+1], h->fref1[0]->i_row_qp[y+1] ) );
+ rc->qpm = X264_MAX( rc->qpm, i_qp_min );
+ }
+
+ int b0 = predict_row_size_sum( h, y, rc->qpm );
+ int b1 = b0;
+ float buffer_left_planned = rc->buffer_fill - rc->frame_size_planned;
+
+ /* More threads means we have to be more cautious in letting ratecontrol use up extra bits. */
+ float rc_tol = buffer_left_planned / h->param.i_threads * rc->rate_tolerance;
+
+ /* Don't modify the row QPs until a sufficent amount of the bits of the frame have been processed, in case a flat */
+ /* area at the top of the frame was measured inaccurately. */
+ if( row_bits_so_far(h,y) < 0.05 * rc->frame_size_planned )
+ return;
+
+ if( h->sh.i_type != SLICE_TYPE_I )
+ rc_tol /= 2;
+
+ if( !rc->b_vbv_min_rate )
+ i_qp_min = X264_MAX( i_qp_min, h->sh.i_qp );
+
+ while( rc->qpm < i_qp_max
+ && ((b1 > rc->frame_size_planned + rc_tol) ||
+ (rc->buffer_fill - b1 < buffer_left_planned * 0.5) ||
+ (b1 > rc->frame_size_planned && rc->qpm < rc->qp_novbv)) )
+ {
+ rc->qpm ++;
+ b1 = predict_row_size_sum( h, y, rc->qpm );
+ }
+
+ while( rc->qpm > i_qp_min
+ && (rc->qpm > h->fdec->i_row_qp[0] || rc->single_frame_vbv)
+ && ((b1 < rc->frame_size_planned * 0.8 && rc->qpm <= prev_row_qp)
+ || b1 < (rc->buffer_fill - rc->buffer_size + rc->buffer_rate) * 1.1) )
+ {
+ rc->qpm --;
+ b1 = predict_row_size_sum( h, y, rc->qpm );
+ }
+
+ /* avoid VBV underflow */
+ while( (rc->qpm < h->param.rc.i_qp_max)
+ && (rc->buffer_fill - b1 < rc->buffer_rate * 0.05 ) )
+ {
+ rc->qpm ++;
+ b1 = predict_row_size_sum( h, y, rc->qpm );
+ }
+
+ x264_ratecontrol_set_estimated_size(h, b1);
+ }
+
+ /* loses the fractional part of the frame-wise qp */
+ rc->f_qpm = rc->qpm;
}
int x264_ratecontrol_qp( x264_t *h )
{
- return h->rc->qp;
+ return h->rc->qpm;
}
/* In 2pass, force the same frame types as in the 1st pass */
/* We could try to initialize everything required for ABR and
* adaptive B-frames, but that would be complicated.
* So just calculate the average QP used so far. */
+ int i;
- h->param.rc.i_qp_constant = (h->stat.i_slice_count[SLICE_TYPE_P] == 0) ? 24
- : 1 + h->stat.i_slice_qp[SLICE_TYPE_P] / h->stat.i_slice_count[SLICE_TYPE_P];
+ h->param.rc.i_qp_constant = (h->stat.i_frame_count[SLICE_TYPE_P] == 0) ? 24
+ : 1 + h->stat.f_frame_qp[SLICE_TYPE_P] / h->stat.i_frame_count[SLICE_TYPE_P];
rc->qp_constant[SLICE_TYPE_P] = x264_clip3( h->param.rc.i_qp_constant, 0, 51 );
rc->qp_constant[SLICE_TYPE_I] = x264_clip3( (int)( qscale2qp( qp2qscale( h->param.rc.i_qp_constant ) / fabs( h->param.rc.f_ip_factor )) + 0.5 ), 0, 51 );
rc->qp_constant[SLICE_TYPE_B] = x264_clip3( (int)( qscale2qp( qp2qscale( h->param.rc.i_qp_constant ) * fabs( h->param.rc.f_pb_factor )) + 0.5 ), 0, 51 );
x264_log(h, X264_LOG_ERROR, "2nd pass has more frames than 1st pass (%d)\n", rc->num_entries);
x264_log(h, X264_LOG_ERROR, "continuing anyway, at constant QP=%d\n", h->param.rc.i_qp_constant);
- if( h->param.b_bframe_adaptive )
+ if( h->param.i_bframe_adaptive )
x264_log(h, X264_LOG_ERROR, "disabling adaptive B-frames\n");
- rc->b_abr = 0;
- rc->b_2pass = 0;
- h->param.rc.b_cbr = 0;
- h->param.rc.b_stat_read = 0;
- h->param.b_bframe_adaptive = 0;
- if( h->param.i_bframe > 1 )
- h->param.i_bframe = 1;
- return X264_TYPE_P;
+ for( i = 0; i < h->param.i_threads; i++ )
+ {
+ h->thread[i]->rc->b_abr = 0;
+ h->thread[i]->rc->b_2pass = 0;
+ h->thread[i]->param.rc.i_rc_method = X264_RC_CQP;
+ h->thread[i]->param.rc.b_stat_read = 0;
+ h->thread[i]->param.i_bframe_adaptive = 0;
+ h->thread[i]->param.i_scenecut_threshold = 0;
+ if( h->thread[i]->param.i_bframe > 1 )
+ h->thread[i]->param.i_bframe = 1;
+ }
+ return X264_TYPE_AUTO;
}
switch( rc->entry[frame_num].pict_type )
{
}
/* After encoding one frame, save stats and update ratecontrol state */
-void x264_ratecontrol_end( x264_t *h, int bits )
+int x264_ratecontrol_end( x264_t *h, int bits )
{
x264_ratecontrol_t *rc = h->rc;
const int *mbs = h->stat.frame.i_mb_count;
int i;
- x264_cpu_restore( h->param.cpu );
+ x264_emms();
h->stat.frame.i_mb_count_skip = mbs[P_SKIP] + mbs[B_SKIP];
h->stat.frame.i_mb_count_i = mbs[I_16x16] + mbs[I_8x8] + mbs[I_4x4];
for( i = B_DIRECT; i < B_8x8; i++ )
h->stat.frame.i_mb_count_p += mbs[i];
+ h->fdec->f_qp_avg_rc = rc->qpa_rc /= h->mb.i_mb_count;
+ h->fdec->f_qp_avg_aq = rc->qpa_aq /= h->mb.i_mb_count;
+
if( h->param.rc.b_stat_write )
{
- char c_type = rc->slice_type==SLICE_TYPE_I ? (h->fenc->i_poc==0 ? 'I' : 'i')
- : rc->slice_type==SLICE_TYPE_P ? 'P'
+ char c_type = h->sh.i_type==SLICE_TYPE_I ? (h->fenc->i_poc==0 ? 'I' : 'i')
+ : h->sh.i_type==SLICE_TYPE_P ? 'P'
: h->fenc->b_kept_as_ref ? 'B' : 'b';
- fprintf( rc->p_stat_file_out,
- "in:%d out:%d type:%c q:%.2f itex:%d ptex:%d mv:%d misc:%d imb:%d pmb:%d smb:%d;\n",
- h->fenc->i_frame, h->i_frame-1,
- c_type, rc->qpa,
- h->stat.frame.i_itex_bits, h->stat.frame.i_ptex_bits,
- h->stat.frame.i_hdr_bits, h->stat.frame.i_misc_bits,
+ int dir_frame = h->stat.frame.i_direct_score[1] - h->stat.frame.i_direct_score[0];
+ int dir_avg = h->stat.i_direct_score[1] - h->stat.i_direct_score[0];
+ char c_direct = h->mb.b_direct_auto_write ?
+ ( dir_frame>0 ? 's' : dir_frame<0 ? 't' :
+ dir_avg>0 ? 's' : dir_avg<0 ? 't' : '-' )
+ : '-';
+ if( fprintf( rc->p_stat_file_out,
+ "in:%d out:%d type:%c q:%.2f tex:%d mv:%d misc:%d imb:%d pmb:%d smb:%d d:%c ref:",
+ h->fenc->i_frame, h->i_frame,
+ c_type, rc->qpa_rc,
+ h->stat.frame.i_tex_bits,
+ h->stat.frame.i_mv_bits,
+ h->stat.frame.i_misc_bits,
h->stat.frame.i_mb_count_i,
h->stat.frame.i_mb_count_p,
- h->stat.frame.i_mb_count_skip);
+ h->stat.frame.i_mb_count_skip,
+ c_direct) < 0 )
+ goto fail;
+
+ for( i = 0; i < h->i_ref0; i++ )
+ {
+ int refcount = h->param.b_interlaced ? h->stat.frame.i_mb_count_ref[0][i*2]
+ + h->stat.frame.i_mb_count_ref[0][i*2+1] :
+ h->stat.frame.i_mb_count_ref[0][i];
+ if( fprintf( rc->p_stat_file_out, "%d ", refcount ) < 0 )
+ goto fail;
+ }
+
+ if( fprintf( rc->p_stat_file_out, ";\n" ) < 0 )
+ goto fail;
+
+ /* Don't re-write the data in multi-pass mode. */
+ if( h->param.rc.b_mb_tree && h->fenc->b_kept_as_ref && !h->param.rc.b_stat_read )
+ {
+ uint8_t i_type = h->sh.i_type;
+ int i;
+ /* Values are stored as big-endian FIX8.8 */
+ for( i = 0; i < h->mb.i_mb_count; i++ )
+ rc->qp_buffer[i] = endian_fix16( h->fenc->f_qp_offset[i]*256.0 );
+ if( fwrite( &i_type, 1, 1, rc->p_mbtree_stat_file_out ) < 1 )
+ goto fail;
+ if( fwrite( rc->qp_buffer, sizeof(uint16_t), h->mb.i_mb_count, rc->p_mbtree_stat_file_out ) < h->mb.i_mb_count )
+ goto fail;
+ }
}
if( rc->b_abr )
{
- if( rc->slice_type != SLICE_TYPE_B )
- rc->cplxr_sum += bits * qp2qscale(rc->qpa) / rc->last_rceq;
+ if( h->sh.i_type != SLICE_TYPE_B )
+ rc->cplxr_sum += bits * qp2qscale(rc->qpa_rc) / rc->last_rceq;
else
{
/* Depends on the fact that B-frame's QP is an offset from the following P-frame's.
* Not perfectly accurate with B-refs, but good enough. */
- rc->cplxr_sum += bits * qp2qscale(rc->qpa) / (rc->last_rceq * fabs(h->param.rc.f_pb_factor));
+ rc->cplxr_sum += bits * qp2qscale(rc->qpa_rc) / (rc->last_rceq * fabs(h->param.rc.f_pb_factor));
}
rc->cplxr_sum *= rc->cbr_decay;
rc->wanted_bits_window += rc->bitrate / rc->fps;
rc->wanted_bits_window *= rc->cbr_decay;
-
- rc->accum_p_qp *= .95;
- rc->accum_p_norm *= .95;
- rc->accum_p_norm += 1;
- if( rc->slice_type == SLICE_TYPE_I )
- rc->accum_p_qp += rc->qpa * fabs(h->param.rc.f_ip_factor);
- else
- rc->accum_p_qp += rc->qpa;
}
if( rc->b_2pass )
rc->expected_bits_sum += qscale2bits( rc->rce, qp2qscale(rc->rce->new_qp) );
}
- update_vbv( h, bits );
+ if( h->mb.b_variable_qp )
+ {
+ if( h->sh.i_type == SLICE_TYPE_B )
+ {
+ rc->bframe_bits += bits;
+ if( h->fenc->b_last_minigop_bframe )
+ {
+ update_predictor( rc->pred_b_from_p, qp2qscale(rc->qpa_rc),
+ h->fref1[h->i_ref1-1]->i_satd, rc->bframe_bits / rc->bframes );
+ rc->bframe_bits = 0;
+ }
+ }
+ }
- if( rc->slice_type != SLICE_TYPE_B )
- rc->last_non_b_pict_type = rc->slice_type;
+ update_vbv( h, bits );
+ return 0;
+fail:
+ x264_log(h, X264_LOG_ERROR, "ratecontrol_end: stats file could not be written to\n");
+ return -1;
}
/****************************************************************************
* 2 pass functions
***************************************************************************/
-double x264_eval( char *s, double *const_value, const char **const_name,
- double (**func1)(void *, double), const char **func1_name,
- double (**func2)(void *, double, double), char **func2_name,
- void *opaque );
-
/**
* modify the bitrate curve from pass1 for one frame
*/
static double get_qscale(x264_t *h, ratecontrol_entry_t *rce, double rate_factor, int frame_num)
{
x264_ratecontrol_t *rcc= h->rc;
- const int pict_type = rce->pict_type;
double q;
- int i;
+ x264_zone_t *zone = get_zone( h, frame_num );
- double const_values[]={
- rce->i_tex_bits * rce->qscale,
- rce->p_tex_bits * rce->qscale,
- (rce->i_tex_bits + rce->p_tex_bits) * rce->qscale,
- rce->mv_bits * rce->qscale,
- (double)rce->i_count / rcc->nmb,
- (double)rce->p_count / rcc->nmb,
- (double)rce->s_count / rcc->nmb,
- rce->pict_type == SLICE_TYPE_I,
- rce->pict_type == SLICE_TYPE_P,
- rce->pict_type == SLICE_TYPE_B,
- h->param.rc.f_qcompress,
- rcc->i_cplx_sum[SLICE_TYPE_I] / rcc->frame_count[SLICE_TYPE_I],
- rcc->i_cplx_sum[SLICE_TYPE_P] / rcc->frame_count[SLICE_TYPE_P],
- rcc->p_cplx_sum[SLICE_TYPE_P] / rcc->frame_count[SLICE_TYPE_P],
- rcc->p_cplx_sum[SLICE_TYPE_B] / rcc->frame_count[SLICE_TYPE_B],
- (rcc->i_cplx_sum[pict_type] + rcc->p_cplx_sum[pict_type]) / rcc->frame_count[pict_type],
- rce->blurred_complexity,
- 0
- };
- static const char *const_names[]={
- "iTex",
- "pTex",
- "tex",
- "mv",
- "iCount",
- "pCount",
- "sCount",
- "isI",
- "isP",
- "isB",
- "qComp",
- "avgIITex",
- "avgPITex",
- "avgPPTex",
- "avgBPTex",
- "avgTex",
- "blurCplx",
- NULL
- };
- static double (*func1[])(void *, double)={
-// (void *)bits2qscale,
- (void *)qscale2bits,
- NULL
- };
- static const char *func1_names[]={
-// "bits2qp",
- "qp2bits",
- NULL
- };
-
- q = x264_eval((char*)h->param.rc.psz_rc_eq, const_values, const_names, func1, func1_names, NULL, NULL, rce);
+ q = pow( rce->blurred_complexity, 1 - rcc->qcompress );
// avoid NaN's in the rc_eq
- if(q != q || rce->i_tex_bits + rce->p_tex_bits + rce->mv_bits == 0)
+ if(!isfinite(q) || rce->tex_bits + rce->mv_bits == 0)
q = rcc->last_qscale;
- else {
+ else
+ {
rcc->last_rceq = q;
q /= rate_factor;
rcc->last_qscale = q;
}
- for( i = rcc->i_zones-1; i >= 0; i-- )
+ if( zone )
{
- x264_zone_t *z = &rcc->zones[i];
- if( frame_num >= z->i_start && frame_num <= z->i_end )
- {
- if( z->b_force_qp )
- q = qp2qscale(z->i_qp);
- else
- q /= z->f_bitrate_factor;
- break;
- }
+ if( zone->b_force_qp )
+ q = qp2qscale(zone->i_qp);
+ else
+ q /= zone->f_bitrate_factor;
}
return q;
}
else if( pict_type == SLICE_TYPE_P
&& rcc->last_non_b_pict_type == SLICE_TYPE_P
- && rce->i_tex_bits + rce->p_tex_bits == 0 )
+ && rce->tex_bits == 0 )
{
q = last_p_q;
}
static double predict_size( predictor_t *p, double q, double var )
{
- return p->coeff*var / (q*p->count);
+ return (p->coeff*var + p->offset) / (q*p->count);
}
static void update_predictor( predictor_t *p, double q, double var, double bits )
{
- p->count *= p->decay;
- p->coeff *= p->decay;
- p->count ++;
- p->coeff += bits*q / var;
+ const double range = 1.5;
+ if( var < 10 )
+ return;
+ double old_coeff = p->coeff / p->count;
+ double new_coeff = bits*q / var;
+ double new_coeff_clipped = x264_clip3f( new_coeff, old_coeff/range, old_coeff*range );
+ double new_offset = bits*q - new_coeff_clipped * var;
+ if( new_offset >= 0 )
+ new_coeff = new_coeff_clipped;
+ else
+ new_offset = 0;
+ p->count *= p->decay;
+ p->coeff *= p->decay;
+ p->offset *= p->decay;
+ p->count ++;
+ p->coeff += new_coeff;
+ p->offset += new_offset;
}
+// update VBV after encoding a frame
static void update_vbv( x264_t *h, int bits )
{
x264_ratecontrol_t *rcc = h->rc;
- if( !rcc->buffer_size )
+ x264_ratecontrol_t *rct = h->thread[0]->rc;
+
+ if( rcc->last_satd >= h->mb.i_mb_count )
+ update_predictor( &rct->pred[h->sh.i_type], qp2qscale(rcc->qpa_rc), rcc->last_satd, bits );
+
+ if( !rcc->b_vbv )
return;
- rcc->buffer_fill += rcc->buffer_rate - bits;
- if( rcc->buffer_fill < 0 && !rcc->b_2pass )
- x264_log( h, X264_LOG_WARNING, "VBV underflow (%.0f bits)\n", rcc->buffer_fill );
- rcc->buffer_fill = x264_clip3( rcc->buffer_fill, 0, rcc->buffer_size );
+ rct->buffer_fill_final -= bits;
+ if( rct->buffer_fill_final < 0 )
+ x264_log( h, X264_LOG_WARNING, "VBV underflow (frame %d, %.0f bits)\n", h->i_frame, rct->buffer_fill_final );
+ rct->buffer_fill_final = X264_MAX( rct->buffer_fill_final, 0 );
+ rct->buffer_fill_final += rct->buffer_rate;
+ rct->buffer_fill_final = X264_MIN( rct->buffer_fill_final, rct->buffer_size );
+}
- if(rcc->last_satd > 100)
- update_predictor( &rcc->pred[rcc->slice_type], qp2qscale(rcc->qpa), rcc->last_satd, bits );
+// provisionally update VBV according to the planned size of all frames currently in progress
+static void update_vbv_plan( x264_t *h, int overhead )
+{
+ x264_ratecontrol_t *rcc = h->rc;
+ rcc->buffer_fill = h->thread[0]->rc->buffer_fill_final - overhead;
+ if( h->param.i_threads > 1 )
+ {
+ int j = h->rc - h->thread[0]->rc;
+ int i;
+ for( i=1; i<h->param.i_threads; i++ )
+ {
+ x264_t *t = h->thread[ (j+i)%h->param.i_threads ];
+ double bits = t->rc->frame_size_planned;
+ if( !t->b_thread_active )
+ continue;
+ bits = X264_MAX(bits, x264_ratecontrol_get_estimated_size(t));
+ rcc->buffer_fill -= bits;
+ rcc->buffer_fill = X264_MAX( rcc->buffer_fill, 0 );
+ rcc->buffer_fill += rcc->buffer_rate;
+ rcc->buffer_fill = X264_MIN( rcc->buffer_fill, rcc->buffer_size );
+ }
+ }
}
// apply VBV constraints and clip qscale to between lmin and lmax
double q0 = q;
/* B-frames are not directly subject to VBV,
- * since they are controlled by the P-frames' QPs.
- * FIXME: in 2pass we could modify previous frames' QP too,
- * instead of waiting for the buffer to fill */
- if( rcc->buffer_size &&
- ( pict_type == SLICE_TYPE_P ||
- ( pict_type == SLICE_TYPE_I && rcc->last_non_b_pict_type == SLICE_TYPE_I ) ) )
- {
- if( rcc->buffer_fill/rcc->buffer_size < 0.5 )
- q /= x264_clip3f( 2.0*rcc->buffer_fill/rcc->buffer_size, 0.5, 1.0 );
- }
- /* Now a hard threshold to make sure the frame fits in VBV.
- * This one is mostly for I-frames. */
- if( rcc->buffer_size && rcc->last_satd > 0 )
- {
- double bits = predict_size( &rcc->pred[rcc->slice_type], q, rcc->last_satd );
- double qf = 1.0;
- if( bits > rcc->buffer_fill/2 )
- qf = x264_clip3f( rcc->buffer_fill/(2*bits), 0.2, 1.0 );
- q /= qf;
- bits *= qf;
- if( bits < rcc->buffer_rate/2 )
- q *= bits*2/rcc->buffer_rate;
- q = X264_MAX( q0, q );
+ * since they are controlled by the P-frames' QPs. */
+
+ if( rcc->b_vbv && rcc->last_satd > 0 )
+ {
+ /* Lookahead VBV: raise the quantizer as necessary such that no frames in
+ * the lookahead overflow and such that the buffer is in a reasonable state
+ * by the end of the lookahead. */
+ if( h->param.rc.i_lookahead )
+ {
+ int j, iterations, terminate = 0;
+
+ /* Avoid an infinite loop. */
+ for( iterations = 0; iterations < 1000 && terminate != 3; iterations++ )
+ {
+ double frame_q[3];
+ double cur_bits = predict_size( &rcc->pred[h->sh.i_type], q, rcc->last_satd );
+ double buffer_fill_cur = rcc->buffer_fill - cur_bits + rcc->buffer_rate;
+ double target_fill;
+ frame_q[0] = h->sh.i_type == SLICE_TYPE_I ? q * h->param.rc.f_ip_factor : q;
+ frame_q[1] = frame_q[0] * h->param.rc.f_pb_factor;
+ frame_q[2] = frame_q[0] / h->param.rc.f_ip_factor;
+
+ /* Loop over the planned future frames. */
+ for( j = 0; buffer_fill_cur >= 0 && buffer_fill_cur <= rcc->buffer_size; j++ )
+ {
+ int i_type = h->fenc->i_planned_type[j];
+ int i_satd = h->fenc->i_planned_satd[j];
+ if( i_type == X264_TYPE_AUTO )
+ break;
+ i_type = IS_X264_TYPE_I( i_type ) ? SLICE_TYPE_I : IS_X264_TYPE_B( i_type ) ? SLICE_TYPE_B : SLICE_TYPE_P;
+ cur_bits = predict_size( &rcc->pred[i_type], frame_q[i_type], i_satd );
+ buffer_fill_cur = buffer_fill_cur - cur_bits + rcc->buffer_rate;
+ }
+ /* Try to get to get the buffer at least 50% filled, but don't set an impossible goal. */
+ target_fill = X264_MIN( rcc->buffer_fill + j * rcc->buffer_rate * 0.5, rcc->buffer_size * 0.5 );
+ if( buffer_fill_cur < target_fill )
+ {
+ q *= 1.01;
+ terminate |= 1;
+ continue;
+ }
+ /* Try to get the buffer no more than 80% filled, but don't set an impossible goal. */
+ target_fill = x264_clip3f( rcc->buffer_fill - j * rcc->buffer_rate * 0.5, rcc->buffer_size * 0.8, rcc->buffer_size );
+ if( rcc->b_vbv_min_rate && buffer_fill_cur > target_fill )
+ {
+ q /= 1.01;
+ terminate |= 2;
+ continue;
+ }
+ break;
+ }
+ }
+ /* Fallback to old purely-reactive algorithm: no lookahead. */
+ else
+ {
+ if( ( pict_type == SLICE_TYPE_P ||
+ ( pict_type == SLICE_TYPE_I && rcc->last_non_b_pict_type == SLICE_TYPE_I ) ) &&
+ rcc->buffer_fill/rcc->buffer_size < 0.5 )
+ {
+ q /= x264_clip3f( 2.0*rcc->buffer_fill/rcc->buffer_size, 0.5, 1.0 );
+ }
+
+ /* Now a hard threshold to make sure the frame fits in VBV.
+ * This one is mostly for I-frames. */
+ double bits = predict_size( &rcc->pred[h->sh.i_type], q, rcc->last_satd );
+ double qf = 1.0;
+ /* For small VBVs, allow the frame to use up the entire VBV. */
+ double max_fill_factor = h->param.rc.i_vbv_buffer_size >= 5*h->param.rc.i_vbv_max_bitrate / rcc->fps ? 2 : 1;
+ /* For single-frame VBVs, request that the frame use up the entire VBV. */
+ double min_fill_factor = rcc->single_frame_vbv ? 1 : 2;
+
+ if( bits > rcc->buffer_fill/max_fill_factor )
+ qf = x264_clip3f( rcc->buffer_fill/(max_fill_factor*bits), 0.2, 1.0 );
+ q /= qf;
+ bits *= qf;
+ if( bits < rcc->buffer_rate/min_fill_factor )
+ q *= bits*min_fill_factor/rcc->buffer_rate;
+ q = X264_MAX( q0, q );
+ }
+
+ /* Check B-frame complexity, and use up any bits that would
+ * overflow before the next P-frame. */
+ if( h->sh.i_type == SLICE_TYPE_P && !rcc->single_frame_vbv )
+ {
+ int nb = rcc->bframes;
+ double bits = predict_size( &rcc->pred[h->sh.i_type], q, rcc->last_satd );
+ double pbbits = bits;
+ double bbits = predict_size( rcc->pred_b_from_p, q * h->param.rc.f_pb_factor, rcc->last_satd );
+ double space;
+ if( bbits > rcc->buffer_rate )
+ nb = 0;
+ pbbits += nb * bbits;
+
+ space = rcc->buffer_fill + (1+nb)*rcc->buffer_rate - rcc->buffer_size;
+ if( pbbits < space )
+ {
+ q *= X264_MAX( pbbits / space, bits / (0.5 * rcc->buffer_size) );
+ }
+ q = X264_MAX( q0-5, q );
+ }
+
+ if( !rcc->b_vbv_min_rate )
+ q = X264_MAX( q0, q );
}
if(lmin==lmax)
}
// update qscale for 1 frame based on actual bits used so far
-static float rate_estimate_qscale(x264_t *h, int pict_type)
+static float rate_estimate_qscale( x264_t *h )
{
float q;
x264_ratecontrol_t *rcc = h->rc;
ratecontrol_entry_t rce;
+ int pict_type = h->sh.i_type;
double lmin = rcc->lmin[pict_type];
double lmax = rcc->lmax[pict_type];
- int64_t total_bits = 8*(h->stat.i_slice_size[SLICE_TYPE_I]
- + h->stat.i_slice_size[SLICE_TYPE_P]
- + h->stat.i_slice_size[SLICE_TYPE_B]);
+ int64_t total_bits = 8*(h->stat.i_frame_size[SLICE_TYPE_I]
+ + h->stat.i_frame_size[SLICE_TYPE_P]
+ + h->stat.i_frame_size[SLICE_TYPE_B]);
if( rcc->b_2pass )
{
if( pict_type == SLICE_TYPE_B )
{
- rcc->last_satd = 0;
+ /* B-frames don't have independent ratecontrol, but rather get the
+ * average QP of the two adjacent P-frames + an offset */
+
+ int i0 = IS_X264_TYPE_I(h->fref0[0]->i_type);
+ int i1 = IS_X264_TYPE_I(h->fref1[0]->i_type);
+ int dt0 = abs(h->fenc->i_poc - h->fref0[0]->i_poc);
+ int dt1 = abs(h->fenc->i_poc - h->fref1[0]->i_poc);
+ float q0 = h->fref0[0]->f_qp_avg_rc;
+ float q1 = h->fref1[0]->f_qp_avg_rc;
+
+ if( h->fref0[0]->i_type == X264_TYPE_BREF )
+ q0 -= rcc->pb_offset/2;
+ if( h->fref1[0]->i_type == X264_TYPE_BREF )
+ q1 -= rcc->pb_offset/2;
+
+ if(i0 && i1)
+ q = (q0 + q1) / 2 + rcc->ip_offset;
+ else if(i0)
+ q = q1;
+ else if(i1)
+ q = q0;
+ else
+ q = (q0*dt1 + q1*dt0) / (dt0 + dt1);
+
if(h->fenc->b_kept_as_ref)
- q = rcc->last_qscale * sqrtf(h->param.rc.f_pb_factor);
+ q += rcc->pb_offset/2;
else
- q = rcc->last_qscale * h->param.rc.f_pb_factor;
- return x264_clip3f(q, lmin, lmax);
+ q += rcc->pb_offset;
+
+ if( rcc->b_2pass && rcc->b_vbv )
+ rcc->frame_size_planned = qscale2bits( &rce, q );
+ else
+ rcc->frame_size_planned = predict_size( rcc->pred_b_from_p, q, h->fref1[h->i_ref1-1]->i_satd );
+ x264_ratecontrol_set_estimated_size(h, rcc->frame_size_planned);
+
+ /* For row SATDs */
+ if( rcc->b_vbv )
+ rcc->last_satd = x264_rc_analyse_slice( h );
+ return qp2qscale(q);
}
else
{
double abr_buffer = 2 * rcc->rate_tolerance * rcc->bitrate;
+
if( rcc->b_2pass )
{
//FIXME adjust abr_buffer based on distance to the end of the video
- int64_t diff = total_bits - (int64_t)rce.expected_bits;
+ int64_t diff;
+ int64_t predicted_bits = total_bits;
+
+ if( rcc->b_vbv )
+ {
+ if( h->param.i_threads > 1 )
+ {
+ int j = h->rc - h->thread[0]->rc;
+ int i;
+ for( i=1; i<h->param.i_threads; i++ )
+ {
+ x264_t *t = h->thread[ (j+i)%h->param.i_threads ];
+ double bits = t->rc->frame_size_planned;
+ if( !t->b_thread_active )
+ continue;
+ bits = X264_MAX(bits, x264_ratecontrol_get_estimated_size(t));
+ predicted_bits += (int64_t)bits;
+ }
+ }
+ }
+ else
+ {
+ if( h->fenc->i_frame < h->param.i_threads )
+ predicted_bits += (int64_t)h->fenc->i_frame * rcc->bitrate / rcc->fps;
+ else
+ predicted_bits += (int64_t)(h->param.i_threads - 1) * rcc->bitrate / rcc->fps;
+ }
+
+ diff = predicted_bits - (int64_t)rce.expected_bits;
q = rce.new_qscale;
q /= x264_clip3f((double)(abr_buffer - diff) / abr_buffer, .5, 2);
- if( h->fenc->i_frame > 30 )
+ if( ((h->fenc->i_frame + 1 - h->param.i_threads) >= rcc->fps) &&
+ (rcc->expected_bits_sum > 0))
{
/* Adjust quant based on the difference between
* achieved and expected bitrate so far */
double w = x264_clip3f( time*100, 0.0, 1.0 );
q *= pow( (double)total_bits / rcc->expected_bits_sum, w );
}
+ if( rcc->b_vbv )
+ {
+ /* Do not overflow vbv */
+ double expected_size = qscale2bits(&rce, q);
+ double expected_vbv = rcc->buffer_fill + rcc->buffer_rate - expected_size;
+ double expected_fullness = rce.expected_vbv / rcc->buffer_size;
+ double qmax = q*(2 - expected_fullness);
+ double size_constraint = 1 + expected_fullness;
+ qmax = X264_MAX(qmax, rce.new_qscale);
+ if (expected_fullness < .05)
+ qmax = lmax;
+ qmax = X264_MIN(qmax, lmax);
+ while( ((expected_vbv < rce.expected_vbv/size_constraint) && (q < qmax)) ||
+ ((expected_vbv < 0) && (q < lmax)))
+ {
+ q *= 1.05;
+ expected_size = qscale2bits(&rce, q);
+ expected_vbv = rcc->buffer_fill + rcc->buffer_rate - expected_size;
+ }
+ rcc->last_satd = x264_rc_analyse_slice( h );
+ }
q = x264_clip3f( q, lmin, lmax );
}
else /* 1pass ABR */
* tradeoff between quality and bitrate precision. But at large
* tolerances, the bit distribution approaches that of 2pass. */
- double wanted_bits, overflow, lmin, lmax;
+ double wanted_bits, overflow=1, lmin, lmax;
rcc->last_satd = x264_rc_analyse_slice( h );
rcc->short_term_cplxsum *= 0.5;
rcc->short_term_cplxsum += rcc->last_satd;
rcc->short_term_cplxcount ++;
- rce.p_tex_bits = rcc->last_satd;
+ rce.tex_bits = rcc->last_satd;
rce.blurred_complexity = rcc->short_term_cplxsum / rcc->short_term_cplxcount;
- rce.i_tex_bits = 0;
rce.mv_bits = 0;
rce.p_count = rcc->nmb;
rce.i_count = 0;
rce.qscale = 1;
rce.pict_type = pict_type;
- if( h->param.rc.i_rf_constant )
+ if( h->param.rc.i_rc_method == X264_RC_CRF )
{
q = get_qscale( h, &rce, rcc->rate_factor_constant, h->fenc->i_frame );
- overflow = 1;
}
else
{
+ int i_frame_done = h->fenc->i_frame + 1 - h->param.i_threads;
+
q = get_qscale( h, &rce, rcc->wanted_bits_window / rcc->cplxr_sum, h->fenc->i_frame );
- wanted_bits = h->fenc->i_frame * rcc->bitrate / rcc->fps;
- abr_buffer *= X264_MAX( 1, sqrt(h->fenc->i_frame/25) );
- overflow = x264_clip3f( 1.0 + (total_bits - wanted_bits) / abr_buffer, .5, 2 );
- q *= overflow;
+ // FIXME is it simpler to keep track of wanted_bits in ratecontrol_end?
+ wanted_bits = i_frame_done * rcc->bitrate / rcc->fps;
+ if( wanted_bits > 0 )
+ {
+ abr_buffer *= X264_MAX( 1, sqrt(i_frame_done/25) );
+ overflow = x264_clip3f( 1.0 + (total_bits - wanted_bits) / abr_buffer, .5, 2 );
+ q *= overflow;
+ }
}
- if( pict_type == SLICE_TYPE_I
+ if( pict_type == SLICE_TYPE_I && h->param.i_keyint_max > 1
/* should test _next_ pict type, but that isn't decided yet */
&& rcc->last_non_b_pict_type != SLICE_TYPE_I )
{
q = qp2qscale( rcc->accum_p_qp / rcc->accum_p_norm );
q /= fabs( h->param.rc.f_ip_factor );
- q = clip_qscale( h, pict_type, q );
}
- else
+ else if( h->i_frame > 0 )
{
- if( h->stat.i_slice_count[SLICE_TYPE_P] < 5 )
- {
- float w = h->stat.i_slice_count[SLICE_TYPE_P] / 5.;
- float q2 = qp2qscale(ABR_INIT_QP);
- q = q*w + q2*(1-w);
- }
-
/* Asymmetric clipping, because symmetric would prevent
* overflow control in areas of rapidly oscillating complexity */
lmin = rcc->last_qscale_for[pict_type] / rcc->lstep;
lmax = rcc->last_qscale_for[pict_type] * rcc->lstep;
- if( overflow > 1.1 )
+ if( overflow > 1.1 && h->i_frame > 3 )
lmax *= rcc->lstep;
else if( overflow < 0.9 )
lmin /= rcc->lstep;
q = x264_clip3f(q, lmin, lmax);
- q = clip_qscale(h, pict_type, q);
- //FIXME use get_diff_limited_q() ?
}
+ else if( h->param.rc.i_rc_method == X264_RC_CRF )
+ {
+ q = qp2qscale( ABR_INIT_QP ) / fabs( h->param.rc.f_ip_factor );
+ }
+ rcc->qp_novbv = qscale2qp(q);
+
+ //FIXME use get_diff_limited_q() ?
+ q = clip_qscale( h, pict_type, q );
}
rcc->last_qscale_for[pict_type] =
rcc->last_qscale = q;
+ if( !(rcc->b_2pass && !rcc->b_vbv) && h->fenc->i_frame == 0 )
+ rcc->last_qscale_for[SLICE_TYPE_P] = q;
+
+ if( rcc->b_2pass && rcc->b_vbv )
+ rcc->frame_size_planned = qscale2bits(&rce, q);
+ else
+ rcc->frame_size_planned = predict_size( &rcc->pred[h->sh.i_type], q, rcc->last_satd );
+ x264_ratecontrol_set_estimated_size(h, rcc->frame_size_planned);
return q;
}
}
+void x264_thread_sync_ratecontrol( x264_t *cur, x264_t *prev, x264_t *next )
+{
+ if( cur != prev )
+ {
+#define COPY(var) memcpy(&cur->rc->var, &prev->rc->var, sizeof(cur->rc->var))
+ /* these vars are updated in x264_ratecontrol_start()
+ * so copy them from the context that most recently started (prev)
+ * to the context that's about to start (cur).
+ */
+ COPY(accum_p_qp);
+ COPY(accum_p_norm);
+ COPY(last_satd);
+ COPY(last_rceq);
+ COPY(last_qscale_for);
+ COPY(last_non_b_pict_type);
+ COPY(short_term_cplxsum);
+ COPY(short_term_cplxcount);
+ COPY(bframes);
+ COPY(prev_zone);
+#undef COPY
+ }
+ if( cur != next )
+ {
+#define COPY(var) next->rc->var = cur->rc->var
+ /* these vars are updated in x264_ratecontrol_end()
+ * so copy them from the context that most recently ended (cur)
+ * to the context that's about to end (next)
+ */
+ COPY(cplxr_sum);
+ COPY(expected_bits_sum);
+ COPY(wanted_bits_window);
+ COPY(bframe_bits);
+#undef COPY
+ }
+ //FIXME row_preds[] (not strictly necessary, but would improve prediction)
+ /* the rest of the variables are either constant or thread-local */
+}
+
+static int find_underflow( x264_t *h, double *fills, int *t0, int *t1, int over )
+{
+ /* find an interval ending on an overflow or underflow (depending on whether
+ * we're adding or removing bits), and starting on the earliest frame that
+ * can influence the buffer fill of that end frame. */
+ x264_ratecontrol_t *rcc = h->rc;
+ const double buffer_min = (over ? .1 : .1) * rcc->buffer_size;
+ const double buffer_max = .9 * rcc->buffer_size;
+ double fill = fills[*t0-1];
+ double parity = over ? 1. : -1.;
+ int i, start=-1, end=-1;
+ for(i = *t0; i < rcc->num_entries; i++)
+ {
+ fill += (rcc->buffer_rate - qscale2bits(&rcc->entry[i], rcc->entry[i].new_qscale)) * parity;
+ fill = x264_clip3f(fill, 0, rcc->buffer_size);
+ fills[i] = fill;
+ if(fill <= buffer_min || i == 0)
+ {
+ if(end >= 0)
+ break;
+ start = i;
+ }
+ else if(fill >= buffer_max && start >= 0)
+ end = i;
+ }
+ *t0 = start;
+ *t1 = end;
+ return start>=0 && end>=0;
+}
+
+static int fix_underflow( x264_t *h, int t0, int t1, double adjustment, double qscale_min, double qscale_max)
+{
+ x264_ratecontrol_t *rcc = h->rc;
+ double qscale_orig, qscale_new;
+ int i;
+ int adjusted = 0;
+ if(t0 > 0)
+ t0++;
+ for(i = t0; i <= t1; i++)
+ {
+ qscale_orig = rcc->entry[i].new_qscale;
+ qscale_orig = x264_clip3f(qscale_orig, qscale_min, qscale_max);
+ qscale_new = qscale_orig * adjustment;
+ qscale_new = x264_clip3f(qscale_new, qscale_min, qscale_max);
+ rcc->entry[i].new_qscale = qscale_new;
+ adjusted = adjusted || (qscale_new != qscale_orig);
+ }
+ return adjusted;
+}
+
+static double count_expected_bits( x264_t *h )
+{
+ x264_ratecontrol_t *rcc = h->rc;
+ double expected_bits = 0;
+ int i;
+ for(i = 0; i < rcc->num_entries; i++)
+ {
+ ratecontrol_entry_t *rce = &rcc->entry[i];
+ rce->expected_bits = expected_bits;
+ expected_bits += qscale2bits(rce, rce->new_qscale);
+ }
+ return expected_bits;
+}
+
+static int vbv_pass2( x264_t *h )
+{
+ /* for each interval of buffer_full .. underflow, uniformly increase the qp of all
+ * frames in the interval until either buffer is full at some intermediate frame or the
+ * last frame in the interval no longer underflows. Recompute intervals and repeat.
+ * Then do the converse to put bits back into overflow areas until target size is met */
+
+ x264_ratecontrol_t *rcc = h->rc;
+ double *fills;
+ double all_available_bits = h->param.rc.i_bitrate * 1000. * rcc->num_entries / rcc->fps;
+ double expected_bits = 0;
+ double adjustment;
+ double prev_bits = 0;
+ int i, t0, t1;
+ double qscale_min = qp2qscale(h->param.rc.i_qp_min);
+ double qscale_max = qp2qscale(h->param.rc.i_qp_max);
+ int iterations = 0;
+ int adj_min, adj_max;
+ CHECKED_MALLOC( fills, (rcc->num_entries+1)*sizeof(double) );
+
+ fills++;
+
+ /* adjust overall stream size */
+ do
+ {
+ iterations++;
+ prev_bits = expected_bits;
+
+ if(expected_bits != 0)
+ { /* not first iteration */
+ adjustment = X264_MAX(X264_MIN(expected_bits / all_available_bits, 0.999), 0.9);
+ fills[-1] = rcc->buffer_size * h->param.rc.f_vbv_buffer_init;
+ t0 = 0;
+ /* fix overflows */
+ adj_min = 1;
+ while(adj_min && find_underflow(h, fills, &t0, &t1, 1))
+ {
+ adj_min = fix_underflow(h, t0, t1, adjustment, qscale_min, qscale_max);
+ t0 = t1;
+ }
+ }
+
+ fills[-1] = rcc->buffer_size * (1. - h->param.rc.f_vbv_buffer_init);
+ t0 = 0;
+ /* fix underflows -- should be done after overflow, as we'd better undersize target than underflowing VBV */
+ adj_max = 1;
+ while(adj_max && find_underflow(h, fills, &t0, &t1, 0))
+ adj_max = fix_underflow(h, t0, t1, 1.001, qscale_min, qscale_max);
+
+ expected_bits = count_expected_bits(h);
+ } while((expected_bits < .995*all_available_bits) && ((int64_t)(expected_bits+.5) > (int64_t)(prev_bits+.5)) );
+
+ if (!adj_max)
+ x264_log( h, X264_LOG_WARNING, "vbv-maxrate issue, qpmax or vbv-maxrate too low\n");
+
+ /* store expected vbv filling values for tracking when encoding */
+ for(i = 0; i < rcc->num_entries; i++)
+ rcc->entry[i].expected_vbv = rcc->buffer_size - fills[i];
+
+ x264_free(fills-1);
+ return 0;
+fail:
+ return -1;
+}
+
static int init_pass2( x264_t *h )
{
x264_ratecontrol_t *rcc = h->rc;
uint64_t all_const_bits = 0;
- uint64_t all_available_bits = (uint64_t)(h->param.rc.i_bitrate * 1000 * (double)rcc->num_entries / rcc->fps);
+ uint64_t all_available_bits = (uint64_t)(h->param.rc.i_bitrate * 1000. * rcc->num_entries / rcc->fps);
double rate_factor, step, step_mult;
double qblur = h->param.rc.f_qblur;
double cplxblur = h->param.rc.f_complexity_blur;
int i;
/* find total/average complexity & const_bits */
- for(i=0; i<rcc->num_entries; i++){
+ for(i=0; i<rcc->num_entries; i++)
+ {
ratecontrol_entry_t *rce = &rcc->entry[i];
all_const_bits += rce->misc_bits;
- rcc->i_cplx_sum[rce->pict_type] += rce->i_tex_bits * rce->qscale;
- rcc->p_cplx_sum[rce->pict_type] += rce->p_tex_bits * rce->qscale;
- rcc->mv_bits_sum[rce->pict_type] += rce->mv_bits * rce->qscale;
- rcc->frame_count[rce->pict_type] ++;
}
if( all_available_bits < all_const_bits)
{
x264_log(h, X264_LOG_ERROR, "requested bitrate is too low. estimated minimum is %d kbps\n",
- (int)(all_const_bits * rcc->fps / (rcc->num_entries * 1000)));
+ (int)(all_const_bits * rcc->fps / (rcc->num_entries * 1000.)));
return -1;
}
* We don't blur the QPs directly, because then one very simple frame
* could drag down the QP of a nearby complex frame and give it more
* bits than intended. */
- for(i=0; i<rcc->num_entries; i++){
+ for(i=0; i<rcc->num_entries; i++)
+ {
ratecontrol_entry_t *rce = &rcc->entry[i];
double weight_sum = 0;
double cplx_sum = 0;
double weight = 1.0;
+ double gaussian_weight;
int j;
/* weighted average of cplx of future frames */
- for(j=1; j<cplxblur*2 && j<rcc->num_entries-i; j++){
+ for(j=1; j<cplxblur*2 && j<rcc->num_entries-i; j++)
+ {
ratecontrol_entry_t *rcj = &rcc->entry[i+j];
weight *= 1 - pow( (float)rcj->i_count / rcc->nmb, 2 );
if(weight < .0001)
break;
- weight_sum += weight;
- cplx_sum += weight * qscale2bits(rcj, 1);
+ gaussian_weight = weight * exp(-j*j/200.0);
+ weight_sum += gaussian_weight;
+ cplx_sum += gaussian_weight * (qscale2bits(rcj, 1) - rcj->misc_bits);
}
/* weighted average of cplx of past frames */
weight = 1.0;
- for(j=0; j<=cplxblur*2 && j<=i; j++){
+ for(j=0; j<=cplxblur*2 && j<=i; j++)
+ {
ratecontrol_entry_t *rcj = &rcc->entry[i-j];
- weight_sum += weight;
- cplx_sum += weight * qscale2bits(rcj, 1);
+ gaussian_weight = weight * exp(-j*j/200.0);
+ weight_sum += gaussian_weight;
+ cplx_sum += gaussian_weight * (qscale2bits(rcj, 1) - rcj->misc_bits);
weight *= 1 - pow( (float)rcj->i_count / rcc->nmb, 2 );
if(weight < .0001)
break;
rce->blurred_complexity = cplx_sum / weight_sum;
}
- qscale = x264_malloc(sizeof(double)*rcc->num_entries);
- if(filter_size > 1)
- blurred_qscale = x264_malloc(sizeof(double)*rcc->num_entries);
+ CHECKED_MALLOC( qscale, sizeof(double)*rcc->num_entries );
+ if( filter_size > 1 )
+ CHECKED_MALLOC( blurred_qscale, sizeof(double)*rcc->num_entries );
else
blurred_qscale = qscale;
step_mult = all_available_bits / expected_bits;
rate_factor = 0;
- for(step = 1E4 * step_mult; step > 1E-7 * step_mult; step *= 0.5){
+ for(step = 1E4 * step_mult; step > 1E-7 * step_mult; step *= 0.5)
+ {
expected_bits = 0;
rate_factor += step;
rcc->last_non_b_pict_type = -1;
rcc->last_accum_p_norm = 1;
rcc->accum_p_norm = 0;
- rcc->buffer_fill = rcc->buffer_size * h->param.rc.f_vbv_buffer_init;
/* find qscale */
- for(i=0; i<rcc->num_entries; i++){
+ for(i=0; i<rcc->num_entries; i++)
+ {
qscale[i] = get_qscale(h, &rcc->entry[i], rate_factor, i);
}
/* fixed I/B qscale relative to P */
- for(i=rcc->num_entries-1; i>=0; i--){
+ for(i=rcc->num_entries-1; i>=0; i--)
+ {
qscale[i] = get_diff_limited_q(h, &rcc->entry[i], qscale[i]);
assert(qscale[i] >= 0);
}
/* smooth curve */
- if(filter_size > 1){
+ if(filter_size > 1)
+ {
assert(filter_size%2==1);
- for(i=0; i<rcc->num_entries; i++){
+ for(i=0; i<rcc->num_entries; i++)
+ {
ratecontrol_entry_t *rce = &rcc->entry[i];
int j;
double q=0.0, sum=0.0;
- for(j=0; j<filter_size; j++){
+ for(j=0; j<filter_size; j++)
+ {
int index = i+j-filter_size/2;
double d = index-i;
double coeff = qblur==0 ? 1.0 : exp(-d*d/(qblur*qblur));
- if(index < 0 || index >= rcc->num_entries) continue;
- if(rce->pict_type != rcc->entry[index].pict_type) continue;
+ if(index < 0 || index >= rcc->num_entries)
+ continue;
+ if(rce->pict_type != rcc->entry[index].pict_type)
+ continue;
q += qscale[index] * coeff;
sum += coeff;
}
}
/* find expected bits */
- for(i=0; i<rcc->num_entries; i++){
+ for(i=0; i<rcc->num_entries; i++)
+ {
ratecontrol_entry_t *rce = &rcc->entry[i];
- double bits;
rce->new_qscale = clip_qscale(h, rce->pict_type, blurred_qscale[i]);
assert(rce->new_qscale >= 0);
- bits = qscale2bits(rce, rce->new_qscale) + rce->misc_bits;
-
- rce->expected_bits = expected_bits;
- expected_bits += bits;
- update_vbv(h, bits);
+ expected_bits += qscale2bits(rce, rce->new_qscale);
}
-//printf("expected:%llu available:%llu factor:%lf avgQ:%lf\n", (uint64_t)expected_bits, all_available_bits, rate_factor);
if(expected_bits > all_available_bits) rate_factor -= step;
}
if(filter_size > 1)
x264_free(blurred_qscale);
+ if(rcc->b_vbv)
+ if( vbv_pass2( h ) )
+ return -1;
+ expected_bits = count_expected_bits(h);
+
if(fabs(expected_bits/all_available_bits - 1.0) > 0.01)
{
double avgq = 0;
avgq += rcc->entry[i].new_qscale;
avgq = qscale2qp(avgq / rcc->num_entries);
- x264_log(h, X264_LOG_ERROR, "Error: 2pass curve failed to converge\n");
- x264_log(h, X264_LOG_ERROR, "target: %.2f kbit/s, expected: %.2f kbit/s, avg QP: %.4f\n",
+ if ((expected_bits > all_available_bits) || (!rcc->b_vbv))
+ x264_log(h, X264_LOG_WARNING, "Error: 2pass curve failed to converge\n");
+ x264_log(h, X264_LOG_WARNING, "target: %.2f kbit/s, expected: %.2f kbit/s, avg QP: %.4f\n",
(float)h->param.rc.i_bitrate,
expected_bits * rcc->fps / (rcc->num_entries * 1000.),
avgq);
if(expected_bits < all_available_bits && avgq < h->param.rc.i_qp_min + 2)
{
if(h->param.rc.i_qp_min > 0)
- x264_log(h, X264_LOG_ERROR, "try reducing target bitrate or reducing qp_min (currently %d)\n", h->param.rc.i_qp_min);
+ x264_log(h, X264_LOG_WARNING, "try reducing target bitrate or reducing qp_min (currently %d)\n", h->param.rc.i_qp_min);
else
- x264_log(h, X264_LOG_ERROR, "try reducing target bitrate\n");
+ x264_log(h, X264_LOG_WARNING, "try reducing target bitrate\n");
}
else if(expected_bits > all_available_bits && avgq > h->param.rc.i_qp_max - 2)
{
if(h->param.rc.i_qp_max < 51)
- x264_log(h, X264_LOG_ERROR, "try increasing target bitrate or increasing qp_max (currently %d)\n", h->param.rc.i_qp_max);
+ x264_log(h, X264_LOG_WARNING, "try increasing target bitrate or increasing qp_max (currently %d)\n", h->param.rc.i_qp_max);
else
- x264_log(h, X264_LOG_ERROR, "try increasing target bitrate\n");
+ x264_log(h, X264_LOG_WARNING, "try increasing target bitrate\n");
}
- else
- x264_log(h, X264_LOG_ERROR, "internal error\n");
+ else if(!(rcc->b_2pass && rcc->b_vbv))
+ x264_log(h, X264_LOG_WARNING, "internal error\n");
}
return 0;
+fail:
+ return -1;
}
-
-