-/* zlib.h -- interface of the 'zlib' general purpose compression library
-
- Copyright (C) 1995-2005 Jean-loup Gailly and Mark Adler
-
- This software is provided 'as-is', without any express or implied
- warranty. In no event will the authors be held liable for any damages
- arising from the use of this software.
-
- Permission is granted to anyone to use this software for any purpose,
- including commercial applications, and to alter it and redistribute it
- freely, subject to the following restrictions:
-
- 1. The origin of this software must not be misrepresented; you must not
- claim that you wrote the original software. If you use this software
- in a product, an acknowledgment in the product documentation would be
- appreciated but is not required.
- 2. Altered source versions must be plainly marked as such, and must not be
- misrepresented as being the original software.
- 3. This notice may not be removed or altered from any source distribution.
-
- Jean-loup Gailly Mark Adler
- jloup@gzip.org madler@alumni.caltech.edu
-
-
- The data format used by the zlib library is described by RFCs (Request for
- Comments) 1950 to 1952 in the files http://www.ietf.org/rfc/rfc1950.txt
- (zlib format), rfc1951.txt (deflate format) and rfc1952.txt (gzip format).
-*/
-
#ifndef _ZLIB_H
#define _ZLIB_H
-#include <linux/zconf.h>
-
-/* zlib deflate based on ZLIB_VERSION "1.1.3" */
-/* zlib inflate based on ZLIB_VERSION "1.2.3" */
-
-/*
- This is a modified version of zlib for use inside the Linux kernel.
- The main changes are to perform all memory allocation in advance.
-
- Inflation Changes:
- * Z_PACKET_FLUSH is added and used by ppp_deflate. Before returning
- this checks there is no more input data available and the next data
- is a STORED block. It also resets the mode to be read for the next
- data, all as per PPP requirements.
- * Addition of zlib_inflateIncomp which copies incompressible data into
- the history window and adjusts the accoutning without calling
- zlib_inflate itself to inflate the data.
-*/
-
-/*
- The 'zlib' compression library provides in-memory compression and
- decompression functions, including integrity checks of the uncompressed
- data. This version of the library supports only one compression method
- (deflation) but other algorithms will be added later and will have the same
- stream interface.
-
- Compression can be done in a single step if the buffers are large
- enough (for example if an input file is mmap'ed), or can be done by
- repeated calls of the compression function. In the latter case, the
- application must provide more input and/or consume the output
- (providing more output space) before each call.
-
- The compressed data format used by default by the in-memory functions is
- the zlib format, which is a zlib wrapper documented in RFC 1950, wrapped
- around a deflate stream, which is itself documented in RFC 1951.
-
- The library also supports reading and writing files in gzip (.gz) format
- with an interface similar to that of stdio.
-
- The zlib format was designed to be compact and fast for use in memory
- and on communications channels. The gzip format was designed for single-
- file compression on file systems, has a larger header than zlib to maintain
- directory information, and uses a different, slower check method than zlib.
-
- The library does not install any signal handler. The decoder checks
- the consistency of the compressed data, so the library should never
- crash even in case of corrupted input.
-*/
-
-struct internal_state;
-
-typedef struct z_stream_s {
- const Byte *next_in; /* next input byte */
- uLong avail_in; /* number of bytes available at next_in */
- uLong total_in; /* total nb of input bytes read so far */
-
- Byte *next_out; /* next output byte should be put there */
- uLong avail_out; /* remaining free space at next_out */
- uLong total_out; /* total nb of bytes output so far */
-
- char *msg; /* last error message, NULL if no error */
- struct internal_state *state; /* not visible by applications */
-
- void *workspace; /* memory allocated for this stream */
-
- int data_type; /* best guess about the data type: ascii or binary */
- uLong adler; /* adler32 value of the uncompressed data */
- uLong reserved; /* reserved for future use */
-} z_stream;
-
-typedef z_stream *z_streamp;
-
-/*
- The application must update next_in and avail_in when avail_in has
- dropped to zero. It must update next_out and avail_out when avail_out
- has dropped to zero. The application must initialize zalloc, zfree and
- opaque before calling the init function. All other fields are set by the
- compression library and must not be updated by the application.
-
- The opaque value provided by the application will be passed as the first
- parameter for calls of zalloc and zfree. This can be useful for custom
- memory management. The compression library attaches no meaning to the
- opaque value.
-
- zalloc must return NULL if there is not enough memory for the object.
- If zlib is used in a multi-threaded application, zalloc and zfree must be
- thread safe.
-
- On 16-bit systems, the functions zalloc and zfree must be able to allocate
- exactly 65536 bytes, but will not be required to allocate more than this
- if the symbol MAXSEG_64K is defined (see zconf.h). WARNING: On MSDOS,
- pointers returned by zalloc for objects of exactly 65536 bytes *must*
- have their offset normalized to zero. The default allocation function
- provided by this library ensures this (see zutil.c). To reduce memory
- requirements and avoid any allocation of 64K objects, at the expense of
- compression ratio, compile the library with -DMAX_WBITS=14 (see zconf.h).
-
- The fields total_in and total_out can be used for statistics or
- progress reports. After compression, total_in holds the total size of
- the uncompressed data and may be saved for use in the decompressor
- (particularly if the decompressor wants to decompress everything in
- a single step).
-*/
-
- /* constants */
-
-#define Z_NO_FLUSH 0
-#define Z_PARTIAL_FLUSH 1 /* will be removed, use Z_SYNC_FLUSH instead */
-#define Z_PACKET_FLUSH 2
-#define Z_SYNC_FLUSH 3
-#define Z_FULL_FLUSH 4
-#define Z_FINISH 5
-#define Z_BLOCK 6 /* Only for inflate at present */
-/* Allowed flush values; see deflate() and inflate() below for details */
-
-#define Z_OK 0
-#define Z_STREAM_END 1
-#define Z_NEED_DICT 2
-#define Z_ERRNO (-1)
-#define Z_STREAM_ERROR (-2)
-#define Z_DATA_ERROR (-3)
-#define Z_MEM_ERROR (-4)
-#define Z_BUF_ERROR (-5)
-#define Z_VERSION_ERROR (-6)
-/* Return codes for the compression/decompression functions. Negative
- * values are errors, positive values are used for special but normal events.
- */
-
-#define Z_NO_COMPRESSION 0
-#define Z_BEST_SPEED 1
-#define Z_BEST_COMPRESSION 9
-#define Z_DEFAULT_COMPRESSION (-1)
-/* compression levels */
-
-#define Z_FILTERED 1
-#define Z_HUFFMAN_ONLY 2
-#define Z_DEFAULT_STRATEGY 0
-/* compression strategy; see deflateInit2() below for details */
-
-#define Z_BINARY 0
-#define Z_ASCII 1
-#define Z_UNKNOWN 2
-/* Possible values of the data_type field */
-
-#define Z_DEFLATED 8
-/* The deflate compression method (the only one supported in this version) */
-
- /* basic functions */
-
-extern int zlib_deflate_workspacesize (int windowBits, int memLevel);
-/*
- Returns the number of bytes that needs to be allocated for a per-
- stream workspace with the specified parameters. A pointer to this
- number of bytes should be returned in stream->workspace before
- you call zlib_deflateInit() or zlib_deflateInit2(). If you call
- zlib_deflateInit(), specify windowBits = MAX_WBITS and memLevel =
- MAX_MEM_LEVEL here. If you call zlib_deflateInit2(), the windowBits
- and memLevel parameters passed to zlib_deflateInit2() must not
- exceed those passed here.
-*/
-
-/*
-extern int deflateInit (z_streamp strm, int level);
-
- Initializes the internal stream state for compression. The fields
- zalloc, zfree and opaque must be initialized before by the caller.
- If zalloc and zfree are set to NULL, deflateInit updates them to
- use default allocation functions.
-
- The compression level must be Z_DEFAULT_COMPRESSION, or between 0 and 9:
- 1 gives best speed, 9 gives best compression, 0 gives no compression at
- all (the input data is simply copied a block at a time).
- Z_DEFAULT_COMPRESSION requests a default compromise between speed and
- compression (currently equivalent to level 6).
-
- deflateInit returns Z_OK if success, Z_MEM_ERROR if there was not
- enough memory, Z_STREAM_ERROR if level is not a valid compression level,
- Z_VERSION_ERROR if the zlib library version (zlib_version) is incompatible
- with the version assumed by the caller (ZLIB_VERSION).
- msg is set to null if there is no error message. deflateInit does not
- perform any compression: this will be done by deflate().
-*/
-
-
-extern int zlib_deflate (z_streamp strm, int flush);
-/*
- deflate compresses as much data as possible, and stops when the input
- buffer becomes empty or the output buffer becomes full. It may introduce some
- output latency (reading input without producing any output) except when
- forced to flush.
-
- The detailed semantics are as follows. deflate performs one or both of the
- following actions:
-
- - Compress more input starting at next_in and update next_in and avail_in
- accordingly. If not all input can be processed (because there is not
- enough room in the output buffer), next_in and avail_in are updated and
- processing will resume at this point for the next call of deflate().
-
- - Provide more output starting at next_out and update next_out and avail_out
- accordingly. This action is forced if the parameter flush is non zero.
- Forcing flush frequently degrades the compression ratio, so this parameter
- should be set only when necessary (in interactive applications).
- Some output may be provided even if flush is not set.
-
- Before the call of deflate(), the application should ensure that at least
- one of the actions is possible, by providing more input and/or consuming
- more output, and updating avail_in or avail_out accordingly; avail_out
- should never be zero before the call. The application can consume the
- compressed output when it wants, for example when the output buffer is full
- (avail_out == 0), or after each call of deflate(). If deflate returns Z_OK
- and with zero avail_out, it must be called again after making room in the
- output buffer because there might be more output pending.
-
- If the parameter flush is set to Z_SYNC_FLUSH, all pending output is
- flushed to the output buffer and the output is aligned on a byte boundary, so
- that the decompressor can get all input data available so far. (In particular
- avail_in is zero after the call if enough output space has been provided
- before the call.) Flushing may degrade compression for some compression
- algorithms and so it should be used only when necessary.
-
- If flush is set to Z_FULL_FLUSH, all output is flushed as with
- Z_SYNC_FLUSH, and the compression state is reset so that decompression can
- restart from this point if previous compressed data has been damaged or if
- random access is desired. Using Z_FULL_FLUSH too often can seriously degrade
- the compression.
-
- If deflate returns with avail_out == 0, this function must be called again
- with the same value of the flush parameter and more output space (updated
- avail_out), until the flush is complete (deflate returns with non-zero
- avail_out).
-
- If the parameter flush is set to Z_FINISH, pending input is processed,
- pending output is flushed and deflate returns with Z_STREAM_END if there
- was enough output space; if deflate returns with Z_OK, this function must be
- called again with Z_FINISH and more output space (updated avail_out) but no
- more input data, until it returns with Z_STREAM_END or an error. After
- deflate has returned Z_STREAM_END, the only possible operations on the
- stream are deflateReset or deflateEnd.
-
- Z_FINISH can be used immediately after deflateInit if all the compression
- is to be done in a single step. In this case, avail_out must be at least
- 0.1% larger than avail_in plus 12 bytes. If deflate does not return
- Z_STREAM_END, then it must be called again as described above.
-
- deflate() sets strm->adler to the adler32 checksum of all input read
- so far (that is, total_in bytes).
-
- deflate() may update data_type if it can make a good guess about
- the input data type (Z_ASCII or Z_BINARY). In doubt, the data is considered
- binary. This field is only for information purposes and does not affect
- the compression algorithm in any manner.
-
- deflate() returns Z_OK if some progress has been made (more input
- processed or more output produced), Z_STREAM_END if all input has been
- consumed and all output has been produced (only when flush is set to
- Z_FINISH), Z_STREAM_ERROR if the stream state was inconsistent (for example
- if next_in or next_out was NULL), Z_BUF_ERROR if no progress is possible
- (for example avail_in or avail_out was zero).
-*/
-
-
-extern int zlib_deflateEnd (z_streamp strm);
-/*
- All dynamically allocated data structures for this stream are freed.
- This function discards any unprocessed input and does not flush any
- pending output.
-
- deflateEnd returns Z_OK if success, Z_STREAM_ERROR if the
- stream state was inconsistent, Z_DATA_ERROR if the stream was freed
- prematurely (some input or output was discarded). In the error case,
- msg may be set but then points to a static string (which must not be
- deallocated).
-*/
-
-
-extern int zlib_inflate_workspacesize (void);
-/*
- Returns the number of bytes that needs to be allocated for a per-
- stream workspace. A pointer to this number of bytes should be
- returned in stream->workspace before calling zlib_inflateInit().
-*/
-
-/*
-extern int zlib_inflateInit (z_streamp strm);
-
- Initializes the internal stream state for decompression. The fields
- next_in, avail_in, and workspace must be initialized before by
- the caller. If next_in is not NULL and avail_in is large enough (the exact
- value depends on the compression method), inflateInit determines the
- compression method from the zlib header and allocates all data structures
- accordingly; otherwise the allocation will be deferred to the first call of
- inflate. If zalloc and zfree are set to NULL, inflateInit updates them to
- use default allocation functions.
-
- inflateInit returns Z_OK if success, Z_MEM_ERROR if there was not enough
- memory, Z_VERSION_ERROR if the zlib library version is incompatible with the
- version assumed by the caller. msg is set to null if there is no error
- message. inflateInit does not perform any decompression apart from reading
- the zlib header if present: this will be done by inflate(). (So next_in and
- avail_in may be modified, but next_out and avail_out are unchanged.)
-*/
-
-
-extern int zlib_inflate (z_streamp strm, int flush);
-/*
- inflate decompresses as much data as possible, and stops when the input
- buffer becomes empty or the output buffer becomes full. It may introduce
- some output latency (reading input without producing any output) except when
- forced to flush.
-
- The detailed semantics are as follows. inflate performs one or both of the
- following actions:
-
- - Decompress more input starting at next_in and update next_in and avail_in
- accordingly. If not all input can be processed (because there is not
- enough room in the output buffer), next_in is updated and processing
- will resume at this point for the next call of inflate().
-
- - Provide more output starting at next_out and update next_out and avail_out
- accordingly. inflate() provides as much output as possible, until there
- is no more input data or no more space in the output buffer (see below
- about the flush parameter).
-
- Before the call of inflate(), the application should ensure that at least
- one of the actions is possible, by providing more input and/or consuming
- more output, and updating the next_* and avail_* values accordingly.
- The application can consume the uncompressed output when it wants, for
- example when the output buffer is full (avail_out == 0), or after each
- call of inflate(). If inflate returns Z_OK and with zero avail_out, it
- must be called again after making room in the output buffer because there
- might be more output pending.
-
- The flush parameter of inflate() can be Z_NO_FLUSH, Z_SYNC_FLUSH,
- Z_FINISH, or Z_BLOCK. Z_SYNC_FLUSH requests that inflate() flush as much
- output as possible to the output buffer. Z_BLOCK requests that inflate() stop
- if and when it gets to the next deflate block boundary. When decoding the
- zlib or gzip format, this will cause inflate() to return immediately after
- the header and before the first block. When doing a raw inflate, inflate()
- will go ahead and process the first block, and will return when it gets to
- the end of that block, or when it runs out of data.
-
- The Z_BLOCK option assists in appending to or combining deflate streams.
- Also to assist in this, on return inflate() will set strm->data_type to the
- number of unused bits in the last byte taken from strm->next_in, plus 64
- if inflate() is currently decoding the last block in the deflate stream,
- plus 128 if inflate() returned immediately after decoding an end-of-block
- code or decoding the complete header up to just before the first byte of the
- deflate stream. The end-of-block will not be indicated until all of the
- uncompressed data from that block has been written to strm->next_out. The
- number of unused bits may in general be greater than seven, except when
- bit 7 of data_type is set, in which case the number of unused bits will be
- less than eight.
-
- inflate() should normally be called until it returns Z_STREAM_END or an
- error. However if all decompression is to be performed in a single step
- (a single call of inflate), the parameter flush should be set to
- Z_FINISH. In this case all pending input is processed and all pending
- output is flushed; avail_out must be large enough to hold all the
- uncompressed data. (The size of the uncompressed data may have been saved
- by the compressor for this purpose.) The next operation on this stream must
- be inflateEnd to deallocate the decompression state. The use of Z_FINISH
- is never required, but can be used to inform inflate that a faster approach
- may be used for the single inflate() call.
-
- In this implementation, inflate() always flushes as much output as
- possible to the output buffer, and always uses the faster approach on the
- first call. So the only effect of the flush parameter in this implementation
- is on the return value of inflate(), as noted below, or when it returns early
- because Z_BLOCK is used.
-
- If a preset dictionary is needed after this call (see inflateSetDictionary
- below), inflate sets strm->adler to the adler32 checksum of the dictionary
- chosen by the compressor and returns Z_NEED_DICT; otherwise it sets
- strm->adler to the adler32 checksum of all output produced so far (that is,
- total_out bytes) and returns Z_OK, Z_STREAM_END or an error code as described
- below. At the end of the stream, inflate() checks that its computed adler32
- checksum is equal to that saved by the compressor and returns Z_STREAM_END
- only if the checksum is correct.
-
- inflate() will decompress and check either zlib-wrapped or gzip-wrapped
- deflate data. The header type is detected automatically. Any information
- contained in the gzip header is not retained, so applications that need that
- information should instead use raw inflate, see inflateInit2() below, or
- inflateBack() and perform their own processing of the gzip header and
- trailer.
-
- inflate() returns Z_OK if some progress has been made (more input processed
- or more output produced), Z_STREAM_END if the end of the compressed data has
- been reached and all uncompressed output has been produced, Z_NEED_DICT if a
- preset dictionary is needed at this point, Z_DATA_ERROR if the input data was
- corrupted (input stream not conforming to the zlib format or incorrect check
- value), Z_STREAM_ERROR if the stream structure was inconsistent (for example
- if next_in or next_out was NULL), Z_MEM_ERROR if there was not enough memory,
- Z_BUF_ERROR if no progress is possible or if there was not enough room in the
- output buffer when Z_FINISH is used. Note that Z_BUF_ERROR is not fatal, and
- inflate() can be called again with more input and more output space to
- continue decompressing. If Z_DATA_ERROR is returned, the application may then
- call inflateSync() to look for a good compression block if a partial recovery
- of the data is desired.
-*/
-
-
-extern int zlib_inflateEnd (z_streamp strm);
-/*
- All dynamically allocated data structures for this stream are freed.
- This function discards any unprocessed input and does not flush any
- pending output.
-
- inflateEnd returns Z_OK if success, Z_STREAM_ERROR if the stream state
- was inconsistent. In the error case, msg may be set but then points to a
- static string (which must not be deallocated).
-*/
-
- /* Advanced functions */
-
-/*
- The following functions are needed only in some special applications.
-*/
-
-/*
-extern int deflateInit2 (z_streamp strm,
- int level,
- int method,
- int windowBits,
- int memLevel,
- int strategy);
-
- This is another version of deflateInit with more compression options. The
- fields next_in, zalloc, zfree and opaque must be initialized before by
- the caller.
-
- The method parameter is the compression method. It must be Z_DEFLATED in
- this version of the library.
-
- The windowBits parameter is the base two logarithm of the window size
- (the size of the history buffer). It should be in the range 8..15 for this
- version of the library. Larger values of this parameter result in better
- compression at the expense of memory usage. The default value is 15 if
- deflateInit is used instead.
-
- The memLevel parameter specifies how much memory should be allocated
- for the internal compression state. memLevel=1 uses minimum memory but
- is slow and reduces compression ratio; memLevel=9 uses maximum memory
- for optimal speed. The default value is 8. See zconf.h for total memory
- usage as a function of windowBits and memLevel.
-
- The strategy parameter is used to tune the compression algorithm. Use the
- value Z_DEFAULT_STRATEGY for normal data, Z_FILTERED for data produced by a
- filter (or predictor), or Z_HUFFMAN_ONLY to force Huffman encoding only (no
- string match). Filtered data consists mostly of small values with a
- somewhat random distribution. In this case, the compression algorithm is
- tuned to compress them better. The effect of Z_FILTERED is to force more
- Huffman coding and less string matching; it is somewhat intermediate
- between Z_DEFAULT and Z_HUFFMAN_ONLY. The strategy parameter only affects
- the compression ratio but not the correctness of the compressed output even
- if it is not set appropriately.
-
- deflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
- memory, Z_STREAM_ERROR if a parameter is invalid (such as an invalid
- method). msg is set to null if there is no error message. deflateInit2 does
- not perform any compression: this will be done by deflate().
-*/
-
-extern int zlib_deflateReset (z_streamp strm);
-/*
- This function is equivalent to deflateEnd followed by deflateInit,
- but does not free and reallocate all the internal compression state.
- The stream will keep the same compression level and any other attributes
- that may have been set by deflateInit2.
-
- deflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source
- stream state was inconsistent (such as zalloc or state being NULL).
-*/
-
-static inline unsigned long deflateBound(unsigned long s)
-{
- return s + ((s + 7) >> 3) + ((s + 63) >> 6) + 11;
-}
-
-/*
-extern int inflateInit2 (z_streamp strm, int windowBits);
-
- This is another version of inflateInit with an extra parameter. The
- fields next_in, avail_in, zalloc, zfree and opaque must be initialized
- before by the caller.
-
- The windowBits parameter is the base two logarithm of the maximum window
- size (the size of the history buffer). It should be in the range 8..15 for
- this version of the library. The default value is 15 if inflateInit is used
- instead. windowBits must be greater than or equal to the windowBits value
- provided to deflateInit2() while compressing, or it must be equal to 15 if
- deflateInit2() was not used. If a compressed stream with a larger window
- size is given as input, inflate() will return with the error code
- Z_DATA_ERROR instead of trying to allocate a larger window.
-
- windowBits can also be -8..-15 for raw inflate. In this case, -windowBits
- determines the window size. inflate() will then process raw deflate data,
- not looking for a zlib or gzip header, not generating a check value, and not
- looking for any check values for comparison at the end of the stream. This
- is for use with other formats that use the deflate compressed data format
- such as zip. Those formats provide their own check values. If a custom
- format is developed using the raw deflate format for compressed data, it is
- recommended that a check value such as an adler32 or a crc32 be applied to
- the uncompressed data as is done in the zlib, gzip, and zip formats. For
- most applications, the zlib format should be used as is. Note that comments
- above on the use in deflateInit2() applies to the magnitude of windowBits.
-
- windowBits can also be greater than 15 for optional gzip decoding. Add
- 32 to windowBits to enable zlib and gzip decoding with automatic header
- detection, or add 16 to decode only the gzip format (the zlib format will
- return a Z_DATA_ERROR). If a gzip stream is being decoded, strm->adler is
- a crc32 instead of an adler32.
-
- inflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
- memory, Z_STREAM_ERROR if a parameter is invalid (such as a null strm). msg
- is set to null if there is no error message. inflateInit2 does not perform
- any decompression apart from reading the zlib header if present: this will
- be done by inflate(). (So next_in and avail_in may be modified, but next_out
- and avail_out are unchanged.)
-*/
-
-extern int zlib_inflateReset (z_streamp strm);
-/*
- This function is equivalent to inflateEnd followed by inflateInit,
- but does not free and reallocate all the internal decompression state.
- The stream will keep attributes that may have been set by inflateInit2.
-
- inflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source
- stream state was inconsistent (such as zalloc or state being NULL).
-*/
-
-extern int zlib_inflateIncomp (z_stream *strm);
-/*
- This function adds the data at next_in (avail_in bytes) to the output
- history without performing any output. There must be no pending output,
- and the decompressor must be expecting to see the start of a block.
- Calling this function is equivalent to decompressing a stored block
- containing the data at next_in (except that the data is not output).
-*/
+#include <zlib.h>
-#define zlib_deflateInit(strm, level) \
- zlib_deflateInit2((strm), (level), Z_DEFLATED, MAX_WBITS, \
- DEF_MEM_LEVEL, Z_DEFAULT_STRATEGY)
-#define zlib_inflateInit(strm) \
- zlib_inflateInit2((strm), DEF_WBITS)
+#define zlib_inflate_workspacesize() 0
+#define zlib_deflate_workspacesize(windowBits, memLevel) 0
-extern int zlib_deflateInit2(z_streamp strm, int level, int method,
- int windowBits, int memLevel,
- int strategy);
-extern int zlib_inflateInit2(z_streamp strm, int windowBits);
+#define zlib_inflateInit2 inflateInit2
+#define zlib_inflate inflate
-#if !defined(_Z_UTIL_H) && !defined(NO_DUMMY_DECL)
- struct internal_state {int dummy;}; /* hack for buggy compilers */
-#endif
+#define zlib_deflateInit2 deflateInit2
+#define zlib_deflate deflate
+#define zlib_deflateEnd deflateEnd
-/* Utility function: initialize zlib, unpack binary blob, clean up zlib,
- * return len or negative error code. */
-extern int zlib_inflate_blob(void *dst, unsigned dst_sz, const void *src, unsigned src_sz);
+#define DEF_MEM_LEVEL 8
#endif /* _ZLIB_H */
projects / bcachefs-tools-debian / blobdiff