]> git.sesse.net Git - vlc/blobdiff - include/vlc_block.h
Added BLOCK_TS_INVALID define to check against unset/invalid timestamp.
[vlc] / include / vlc_block.h
index 673414c43841d0b3471b4a01f32e34634acf3eba..37d21badf027d34ab1a83db9f847a6dbe674e774 100644 (file)
  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston MA 02110-1301, USA.
  *****************************************************************************/
 
-#ifndef _VLC_BLOCK_H
-#define _VLC_BLOCK_H 1
+#ifndef VLC_BLOCK_H
+#define VLC_BLOCK_H 1
+
+/**
+ * \file
+ * This file implements functions and structures to handle blocks of data in vlc
+ *
+ */
 
 /****************************************************************************
  * block:
@@ -31,7 +37,7 @@
  * - i_flags may not always be set (ie could be 0, even for a key frame
  *      it depends where you receive the buffer (before/after a packetizer
  *      and the demux/packetizer implementations.
- * - i_dts/i_pts could be 0, it means no pts
+ * - i_dts/i_pts could be BLOCK_TS_INVALID, it means no pts/dts
  * - i_length: length in microseond of the packet, can be null except in the
  *      sout where it is mandatory.
  * - i_rate 0 or a valid input rate, look at vlc_input.h
@@ -62,6 +68,8 @@ typedef struct block_sys_t block_sys_t;
 #define BLOCK_FLAG_END_OF_FRAME  0x0040
 /** This is not a key frame for bitrate shaping */
 #define BLOCK_FLAG_NO_KEYFRAME   0x0080
+/** This block contains the last part of a sequence  */
+#define BLOCK_FLAG_END_OF_SEQUENCE 0x0100
 /** This block contains a clock reference */
 #define BLOCK_FLAG_CLOCK         0x0200
 /** This block is scrambled */
@@ -71,15 +79,26 @@ typedef struct block_sys_t block_sys_t;
 /** This block is corrupted and/or there is data loss  */
 #define BLOCK_FLAG_CORRUPTED     0x1000
 
-#define BLOCK_FLAG_PRIVATE_MASK  0xffff0000
-#define BLOCK_FLAG_PRIVATE_SHIFT 16
+#define BLOCK_FLAG_TYPE_MASK \
+    (BLOCK_FLAG_TYPE_I|BLOCK_FLAG_TYPE_P|BLOCK_FLAG_TYPE_B|BLOCK_FLAG_TYPE_PB)
+
+/* These are for input core private usage only */
+#define BLOCK_FLAG_CORE_PRIVATE_MASK  0x00ff0000
+#define BLOCK_FLAG_CORE_PRIVATE_SHIFT 16
+
+/* These are for module private usage only */
+#define BLOCK_FLAG_PRIVATE_MASK  0xff000000
+#define BLOCK_FLAG_PRIVATE_SHIFT 24
+
+/* All timestamp below or equal to this define are invalid/unset
+ * XXX the numerical value is 0 because of historical reason and will change.*/
+#define BLOCK_TS_INVALID (0)
 
 typedef void (*block_free_t) (block_t *);
 
 struct block_t
 {
     block_t     *p_next;
-    block_t     *p_prev;
 
     uint32_t    i_flags;
 
@@ -114,11 +133,12 @@ struct block_t
  * - block_Duplicate : create a copy of a block.
  ****************************************************************************/
 VLC_EXPORT( void,      block_Init,    ( block_t *, void *, size_t ) );
-VLC_EXPORT( block_t *, block_Alloc,   ( size_t ) );
-VLC_EXPORT( block_t *, block_Realloc, ( block_t *, ssize_t i_pre, size_t i_body ) );
+VLC_EXPORT( block_t *, block_Alloc,   ( size_t ) LIBVLC_USED );
+VLC_EXPORT( block_t *, block_Realloc, ( block_t *, ssize_t i_pre, size_t i_body ) LIBVLC_USED );
 
 #define block_New( dummy, size ) block_Alloc(size)
 
+LIBVLC_USED
 static inline block_t *block_Duplicate( block_t *p_block )
 {
     block_t *p_dup = block_Alloc( p_block->i_buffer );
@@ -135,25 +155,32 @@ static inline block_t *block_Duplicate( block_t *p_block )
 
     return p_dup;
 }
+
 static inline void block_Release( block_t *p_block )
 {
     p_block->pf_release( p_block );
 }
 
-VLC_EXPORT( block_t *, block_mmap_Alloc, (void *addr, size_t length) );
-VLC_EXPORT( block_t *, block_File, (int fd) );
+VLC_EXPORT( block_t *, block_mmap_Alloc, (void *addr, size_t length) LIBVLC_USED );
+VLC_EXPORT( block_t *, block_File, (int fd) LIBVLC_USED );
+
+static inline void block_Cleanup (void *block)
+{
+    block_Release ((block_t *)block);
+}
+#define block_cleanup_push( block ) vlc_cleanup_push (block_Cleanup, block)
 
 /****************************************************************************
  * Chains of blocks functions helper
  ****************************************************************************
- * - block_ChainAppend : append a block the the last block of a chain. Try to
+ * - block_ChainAppend : append a block to the last block of a chain. Try to
  *      avoid using with a lot of data as it's really slow, prefer
  *      block_ChainLastAppend
  * - block_ChainLastAppend : use a pointer over a pointer to the next blocks,
  *      and update it.
  * - block_ChainRelease : release a chain of block
  * - block_ChainExtract : extract data from a chain, return real bytes counts
- * - block_ChainGather : gather a chain, free it and return a block.
+ * - block_ChainGather : gather a chain, free it and return one block.
  ****************************************************************************/
 static inline void block_ChainAppend( block_t **pp_list, block_t *p_block )
 {
@@ -170,7 +197,7 @@ static inline void block_ChainAppend( block_t **pp_list, block_t *p_block )
     }
 }
 
-static inline void block_ChainLastAppend( block_t ***ppp_last, block_t *p_block  )
+static inline void block_ChainLastAppend( block_t ***ppp_last, block_t *p_block )
 {
     block_t *p_last = p_block;
 
@@ -208,20 +235,39 @@ static size_t block_ChainExtract( block_t *p_list, void *p_data, size_t i_max )
     return i_total;
 }
 
+static inline void block_ChainProperties( block_t *p_list, int *pi_count, size_t *pi_size, mtime_t *pi_length )
+{
+    size_t i_size = 0;
+    mtime_t i_length = 0;
+    int i_count = 0;
+
+    while( p_list )
+    {
+        i_size += p_list->i_buffer;
+        i_length += p_list->i_length;
+        i_count++;
+
+        p_list = p_list->p_next;
+    }
+
+    if( pi_size )
+        *pi_size = i_size;
+    if( pi_length )
+        *pi_length = i_length;
+    if( pi_count )
+        *pi_count = i_count;
+}
+
 static inline block_t *block_ChainGather( block_t *p_list )
 {
     size_t  i_total = 0;
     mtime_t i_length = 0;
-    block_t *b, *g;
+    block_t *g;
 
     if( p_list->p_next == NULL )
         return p_list;  /* Already gathered */
 
-    for( b = p_list; b != NULL; b = b->p_next )
-    {
-        i_total += b->i_buffer;
-        i_length += b->i_length;
-    }
+    block_ChainProperties( p_list, NULL, &i_total, &i_length );
 
     g = block_Alloc( i_total );
     block_ChainExtract( p_list, g->p_buffer, g->i_buffer );
@@ -236,7 +282,6 @@ static inline block_t *block_ChainGather( block_t *p_list )
     return g;
 }
 
-
 /****************************************************************************
  * Fifos of blocks.
  ****************************************************************************
@@ -249,19 +294,22 @@ static inline block_t *block_ChainGather( block_t *p_list )
  *      needed), be carefull, you can use it ONLY if you are sure to be the
  *      only one getting data from the fifo.
  * - block_FifoCount : how many packets are waiting in the fifo
- * - block_FifoSize : how many cumulated bytes are waiting in the fifo
  * - block_FifoWake : wake ups a thread with block_FifoGet() = NULL
  *   (this is used to wakeup a thread when there is no data to queue)
+ *
+ * block_FifoGet and block_FifoShow are cancellation points.
  ****************************************************************************/
 
-VLC_EXPORT( block_fifo_t *, block_FifoNew,      ( void ) );
+VLC_EXPORT( block_fifo_t *, block_FifoNew,      ( void ) LIBVLC_USED );
 VLC_EXPORT( void,           block_FifoRelease,  ( block_fifo_t * ) );
+/* TODO: do we need to export this? */
+void block_FifoPace (block_fifo_t *fifo, size_t max_depth, size_t max_size);
 VLC_EXPORT( void,           block_FifoEmpty,    ( block_fifo_t * ) );
 VLC_EXPORT( size_t,         block_FifoPut,      ( block_fifo_t *, block_t * ) );
 VLC_EXPORT( void,           block_FifoWake,     ( block_fifo_t * ) );
-VLC_EXPORT( block_t *,      block_FifoGet,      ( block_fifo_t * ) );
+VLC_EXPORT( block_t *,      block_FifoGet,      ( block_fifo_t * ) LIBVLC_USED );
 VLC_EXPORT( block_t *,      block_FifoShow,     ( block_fifo_t * ) );
-VLC_EXPORT( size_t,         block_FifoSize,     ( const block_fifo_t *p_fifo ) );
-VLC_EXPORT( size_t,         block_FifoCount,    ( const block_fifo_t *p_fifo ) );
+size_t block_FifoSize( const block_fifo_t *p_fifo ) LIBVLC_USED;
+VLC_EXPORT( size_t,         block_FifoCount,    ( const block_fifo_t *p_fifo ) LIBVLC_USED );
 
 #endif /* VLC_BLOCK_H */