/**
* Adjust the frame size to make the average bit rate match the target bit rate.
* This is only needed for 11025, 22050, and 44100 sample rates or any E-AC-3.
+ *
+ * @param s AC-3 encoder private context
*/
void ff_ac3_adjust_frame_size(AC3EncodeContext *s)
{
}
+/**
+ * Set the initial coupling strategy parameters prior to coupling analysis.
+ *
+ * @param s AC-3 encoder private context
+ */
void ff_ac3_compute_coupling_strategy(AC3EncodeContext *s)
{
int blk, ch;
/**
* Apply stereo rematrixing to coefficients based on rematrixing flags.
+ *
+ * @param s AC-3 encoder private context
*/
void ff_ac3_apply_rematrixing(AC3EncodeContext *s)
{
}
-/**
+/*
* Initialize exponent tables.
*/
static av_cold void exponent_init(AC3EncodeContext *s)
}
-/**
+/*
* Extract exponents from the MDCT coefficients.
*/
static void extract_exponents(AC3EncodeContext *s)
{ EXP_D45, EXP_D25, EXP_D25, EXP_D15, EXP_D15, EXP_D15 }
};
-/**
+/*
* Calculate exponent strategies for all channels.
* Array arrangement is reversed to simplify the per-channel calculation.
*/
/**
* Update the exponents so that they are the ones the decoder will decode.
+ *
+ * @param[in,out] exp array of exponents for 1 block in 1 channel
+ * @param nb_exps number of exponents in active bandwidth
+ * @param exp_strategy exponent strategy for the block
+ * @param cpl indicates if the block is in the coupling channel
*/
static void encode_exponents_blk_ch(uint8_t *exp, int nb_exps, int exp_strategy,
int cpl)
}
-/**
+/*
* Encode exponents from original extracted form to what the decoder will see.
* This copies and groups exponents based on exponent strategy and reduces
* deltas between adjacent exponent groups so that they can be differentially
}
+/*
+ * Count exponent bits based on bandwidth, coupling, and exponent strategies.
+ */
+static int count_exponent_bits(AC3EncodeContext *s)
+{
+ int blk, ch;
+ int nb_groups, bit_count;
+
+ bit_count = 0;
+ for (blk = 0; blk < s->num_blocks; blk++) {
+ AC3Block *block = &s->blocks[blk];
+ for (ch = !block->cpl_in_use; ch <= s->channels; ch++) {
+ int exp_strategy = s->exp_strategy[ch][blk];
+ int cpl = (ch == CPL_CH);
+ int nb_coefs = block->end_freq[ch] - s->start_freq[ch];
+
+ if (exp_strategy == EXP_REUSE)
+ continue;
+
+ nb_groups = exponent_group_tab[cpl][exp_strategy-1][nb_coefs];
+ bit_count += 4 + (nb_groups * 7);
+ }
+ }
+
+ return bit_count;
+}
+
+
/**
* Group exponents.
* 3 delta-encoded exponents are in each 7-bit group. The number of groups
* varies depending on exponent strategy and bandwidth.
+ *
+ * @param s AC-3 encoder private context
*/
-static void group_exponents(AC3EncodeContext *s)
+void ff_ac3_group_exponents(AC3EncodeContext *s)
{
int blk, ch, i, cpl;
- int group_size, nb_groups, bit_count;
+ int group_size, nb_groups;
uint8_t *p;
int delta0, delta1, delta2;
int exp0, exp1;
- bit_count = 0;
for (blk = 0; blk < s->num_blocks; blk++) {
AC3Block *block = &s->blocks[blk];
for (ch = !block->cpl_in_use; ch <= s->channels; ch++) {
cpl = (ch == CPL_CH);
group_size = exp_strategy + (exp_strategy == EXP_D45);
nb_groups = exponent_group_tab[cpl][exp_strategy-1][block->end_freq[ch]-s->start_freq[ch]];
- bit_count += 4 + (nb_groups * 7);
p = block->exp[ch] + s->start_freq[ch] - cpl;
/* DC exponent */
}
}
}
-
- s->exponent_bits = bit_count;
}
* Calculate final exponents from the supplied MDCT coefficients and exponent shift.
* Extract exponents from MDCT coefficients, calculate exponent strategies,
* and encode final exponents.
+ *
+ * @param s AC-3 encoder private context
*/
void ff_ac3_process_exponents(AC3EncodeContext *s)
{
encode_exponents(s);
- group_exponents(s);
-
emms_c();
}
-/**
+/*
* Count frame bits that are based solely on fixed parameters.
* This only has to be run once when the encoder is initialized.
*/
}
-/**
+/*
* Initialize bit allocation.
* Set default parameter codes and calculate parameter values.
*/
}
-/**
+/*
* Count the bits used to encode the frame, minus exponents and mantissas.
* Bits based on fixed parameters have already been counted, so now we just
* have to add the bits based on parameters that change during encoding.
/* header */
if (s->eac3) {
+ if (opt->eac3_mixing_metadata) {
+ if (s->channel_mode > AC3_CHMODE_STEREO)
+ frame_bits += 2;
+ if (s->has_center)
+ frame_bits += 6;
+ if (s->has_surround)
+ frame_bits += 6;
+ frame_bits += s->lfe_on;
+ frame_bits += 1 + 1 + 2;
+ if (s->channel_mode < AC3_CHMODE_STEREO)
+ frame_bits++;
+ frame_bits++;
+ }
+ if (opt->eac3_info_metadata) {
+ frame_bits += 3 + 1 + 1;
+ if (s->channel_mode == AC3_CHMODE_STEREO)
+ frame_bits += 2 + 2;
+ if (s->channel_mode >= AC3_CHMODE_2F2R)
+ frame_bits += 2;
+ frame_bits++;
+ if (opt->audio_production_info)
+ frame_bits += 5 + 2 + 1;
+ frame_bits++;
+ }
/* coupling */
if (s->channel_mode > AC3_CHMODE_MONO) {
frame_bits++;
if (block->cpl_in_use) {
for (ch = 1; ch <= s->fbw_channels; ch++) {
if (block->channel_in_cpl[ch]) {
- if (!s->eac3 || block->new_cpl_coords != 2)
+ if (!s->eac3 || block->new_cpl_coords[ch] != 2)
frame_bits++;
- if (block->new_cpl_coords) {
+ if (block->new_cpl_coords[ch]) {
frame_bits += 2;
frame_bits += (4 + 4) * s->num_cpl_bands;
}
}
-/**
+/*
* Calculate masking curve based on the final exponents.
* Also calculate the power spectral densities to use in future calculations.
*/
}
-/**
+/*
* Ensure that bap for each block and channel point to the current bap_buffer.
* They may have been switched during the bit allocation search.
*/
* Initialize mantissa counts.
* These are set so that they are padded to the next whole group size when bits
* are counted in compute_mantissa_size.
+ *
+ * @param[in,out] mant_cnt running counts for each bap value for each block
*/
static void count_mantissa_bits_init(uint16_t mant_cnt[AC3_MAX_BLOCKS][16])
{
/**
* Update mantissa bit counts for all blocks in 1 channel in a given bandwidth
* range.
+ *
+ * @param s AC-3 encoder private context
+ * @param ch channel index
+ * @param[in,out] mant_cnt running counts for each bap value for each block
+ * @param start starting coefficient bin
+ * @param end ending coefficient bin
*/
static void count_mantissa_bits_update_ch(AC3EncodeContext *s, int ch,
uint16_t mant_cnt[AC3_MAX_BLOCKS][16],
}
-/**
+/*
* Count the number of mantissa bits in the frame based on the bap values.
*/
static int count_mantissa_bits(AC3EncodeContext *s)
* Run the bit allocation with a given SNR offset.
* This calculates the bit allocation pointers that will be used to determine
* the quantization of each mantissa.
+ *
+ * @param s AC-3 encoder private context
+ * @param snr_offset SNR offset, 0 to 1023
* @return the number of bits needed for mantissas if the given SNR offset is
* is used.
*/
}
-/**
+/*
* Constant bitrate bit allocation search.
* Find the largest SNR offset that will allow data to fit in the frame.
*/
}
-/**
+/*
* Perform bit allocation search.
* Finds the SNR offset value that maximizes quality and fits in the specified
* frame size. Output is the SNR offset and a set of bit allocation pointers
{
count_frame_bits(s);
+ s->exponent_bits = count_exponent_bits(s);
+
bit_alloc_masking(s);
return cbr_bit_allocation(s);
/**
* Symmetric quantization on 'levels' levels.
+ *
+ * @param c unquantized coefficient
+ * @param e exponent
+ * @param levels number of quantization levels
+ * @return quantized coefficient
*/
static inline int sym_quant(int c, int e, int levels)
{
/**
* Asymmetric quantization on 2^qbits levels.
+ *
+ * @param c unquantized coefficient
+ * @param e exponent
+ * @param qbits number of quantization bits
+ * @return quantized coefficient
*/
static inline int asym_quant(int c, int e, int qbits)
{
/**
* Quantize a set of mantissas for a single channel in a single block.
+ *
+ * @param s Mantissa count context
+ * @param fixed_coef unquantized fixed-point coefficients
+ * @param exp exponents
+ * @param bap bit allocation pointer indices
+ * @param[out] qmant quantized coefficients
+ * @param start_freq starting coefficient bin
+ * @param end_freq ending coefficient bin
*/
static void quantize_mantissas_blk_ch(AC3Mant *s, int32_t *fixed_coef,
uint8_t *exp, uint8_t *bap,
int i;
for (i = start_freq; i < end_freq; i++) {
- int v;
int c = fixed_coef[i];
int e = exp[i];
- int b = bap[i];
- switch (b) {
- case 0:
- v = 0;
- break;
+ int v = bap[i];
+ if (v)
+ switch (v) {
case 1:
v = sym_quant(c, e, 3);
switch (s->mant1_cnt) {
v = asym_quant(c, e, 16);
break;
default:
- v = asym_quant(c, e, b - 1);
+ v = asym_quant(c, e, v - 1);
break;
}
qmant[i] = v;
/**
* Quantize mantissas using coefficients, exponents, and bit allocation pointers.
+ *
+ * @param s AC-3 encoder private context
*/
void ff_ac3_quantize_mantissas(AC3EncodeContext *s)
{
}
-/**
+/*
* Write the AC-3 frame header to the output bitstream.
*/
static void ac3_output_frame_header(AC3EncodeContext *s)
}
-/**
+/*
* Write one audio block to the output bitstream.
*/
static void output_audio_block(AC3EncodeContext *s, int blk)
if (block->cpl_in_use) {
for (ch = 1; ch <= s->fbw_channels; ch++) {
if (block->channel_in_cpl[ch]) {
- if (!s->eac3 || block->new_cpl_coords != 2)
- put_bits(&s->pb, 1, block->new_cpl_coords);
- if (block->new_cpl_coords) {
+ if (!s->eac3 || block->new_cpl_coords[ch] != 2)
+ put_bits(&s->pb, 1, block->new_cpl_coords[ch]);
+ if (block->new_cpl_coords[ch]) {
put_bits(&s->pb, 2, block->cpl_master_exp[ch]);
for (bnd = 0; bnd < s->num_cpl_bands; bnd++) {
put_bits(&s->pb, 4, block->cpl_coord_exp [ch][bnd]);
}
-/**
+/*
* Fill the end of the frame with 0's and compute the two CRCs.
*/
static void output_frame_end(AC3EncodeContext *s)
/**
* Write the frame to the output bitstream.
+ *
+ * @param s AC-3 encoder private context
+ * @param frame output data buffer
*/
void ff_ac3_output_frame(AC3EncodeContext *s, unsigned char *frame)
{
if (opt->audio_production_info) {
av_dlog(avctx, "mixing_level: %ddB\n", opt->mixing_level);
switch (opt->room_type) {
- case 0: av_strlcpy(strbuf, "notindicated", 32); break;
- case 1: av_strlcpy(strbuf, "large", 32); break;
- case 2: av_strlcpy(strbuf, "small", 32); break;
+ case AC3ENC_OPT_NOT_INDICATED: av_strlcpy(strbuf, "notindicated", 32); break;
+ case AC3ENC_OPT_LARGE_ROOM: av_strlcpy(strbuf, "large", 32); break;
+ case AC3ENC_OPT_SMALL_ROOM: av_strlcpy(strbuf, "small", 32); break;
default: snprintf(strbuf, 32, "ERROR (%d)", opt->room_type);
}
av_dlog(avctx, "room_type: %s\n", strbuf);
av_dlog(avctx, "dialnorm: %ddB\n", opt->dialogue_level);
if (s->channel_mode == AC3_CHMODE_STEREO) {
switch (opt->dolby_surround_mode) {
- case 0: av_strlcpy(strbuf, "notindicated", 32); break;
- case 1: av_strlcpy(strbuf, "on", 32); break;
- case 2: av_strlcpy(strbuf, "off", 32); break;
+ case AC3ENC_OPT_NOT_INDICATED: av_strlcpy(strbuf, "notindicated", 32); break;
+ case AC3ENC_OPT_MODE_ON: av_strlcpy(strbuf, "on", 32); break;
+ case AC3ENC_OPT_MODE_OFF: av_strlcpy(strbuf, "off", 32); break;
default: snprintf(strbuf, 32, "ERROR (%d)", opt->dolby_surround_mode);
}
av_dlog(avctx, "dsur_mode: %s\n", strbuf);
if (s->bitstream_id == 6) {
if (opt->extended_bsi_1) {
switch (opt->preferred_stereo_downmix) {
- case 0: av_strlcpy(strbuf, "notindicated", 32); break;
- case 1: av_strlcpy(strbuf, "ltrt", 32); break;
- case 2: av_strlcpy(strbuf, "loro", 32); break;
+ case AC3ENC_OPT_NOT_INDICATED: av_strlcpy(strbuf, "notindicated", 32); break;
+ case AC3ENC_OPT_DOWNMIX_LTRT: av_strlcpy(strbuf, "ltrt", 32); break;
+ case AC3ENC_OPT_DOWNMIX_LORO: av_strlcpy(strbuf, "loro", 32); break;
default: snprintf(strbuf, 32, "ERROR (%d)", opt->preferred_stereo_downmix);
}
av_dlog(avctx, "dmix_mode: %s\n", strbuf);
}
if (opt->extended_bsi_2) {
switch (opt->dolby_surround_ex_mode) {
- case 0: av_strlcpy(strbuf, "notindicated", 32); break;
- case 1: av_strlcpy(strbuf, "on", 32); break;
- case 2: av_strlcpy(strbuf, "off", 32); break;
+ case AC3ENC_OPT_NOT_INDICATED: av_strlcpy(strbuf, "notindicated", 32); break;
+ case AC3ENC_OPT_MODE_ON: av_strlcpy(strbuf, "on", 32); break;
+ case AC3ENC_OPT_MODE_OFF: av_strlcpy(strbuf, "off", 32); break;
default: snprintf(strbuf, 32, "ERROR (%d)", opt->dolby_surround_ex_mode);
}
av_dlog(avctx, "dsurex_mode: %s\n", strbuf);
switch (opt->dolby_headphone_mode) {
- case 0: av_strlcpy(strbuf, "notindicated", 32); break;
- case 1: av_strlcpy(strbuf, "on", 32); break;
- case 2: av_strlcpy(strbuf, "off", 32); break;
+ case AC3ENC_OPT_NOT_INDICATED: av_strlcpy(strbuf, "notindicated", 32); break;
+ case AC3ENC_OPT_MODE_ON: av_strlcpy(strbuf, "on", 32); break;
+ case AC3ENC_OPT_MODE_OFF: av_strlcpy(strbuf, "off", 32); break;
default: snprintf(strbuf, 32, "ERROR (%d)", opt->dolby_headphone_mode);
}
av_dlog(avctx, "dheadphone_mode: %s\n", strbuf);
switch (opt->ad_converter_type) {
- case 0: av_strlcpy(strbuf, "standard", 32); break;
- case 1: av_strlcpy(strbuf, "hdcd", 32); break;
+ case AC3ENC_OPT_ADCONV_STANDARD: av_strlcpy(strbuf, "standard", 32); break;
+ case AC3ENC_OPT_ADCONV_HDCD: av_strlcpy(strbuf, "hdcd", 32); break;
default: snprintf(strbuf, 32, "ERROR (%d)", opt->ad_converter_type);
}
av_dlog(avctx, "ad_conv_type: %s\n", strbuf);
/**
* Validate metadata options as set by AVOption system.
* These values can optionally be changed per-frame.
+ *
+ * @param s AC-3 encoder private context
*/
int ff_ac3_validate_metadata(AC3EncodeContext *s)
{
AVCodecContext *avctx = s->avctx;
AC3EncOptions *opt = &s->options;
- /* validate mixing levels */
- if (s->has_center) {
- validate_mix_level(avctx, "center_mix_level", &opt->center_mix_level,
- cmixlev_options, CMIXLEV_NUM_OPTIONS, 1, 0,
- &s->center_mix_level);
+ opt->audio_production_info = 0;
+ opt->extended_bsi_1 = 0;
+ opt->extended_bsi_2 = 0;
+ opt->eac3_mixing_metadata = 0;
+ opt->eac3_info_metadata = 0;
+
+ /* determine mixing metadata / xbsi1 use */
+ if (s->channel_mode > AC3_CHMODE_STEREO && opt->preferred_stereo_downmix != AC3ENC_OPT_NONE) {
+ opt->extended_bsi_1 = 1;
+ opt->eac3_mixing_metadata = 1;
+ }
+ if (s->has_center &&
+ (opt->ltrt_center_mix_level >= 0 || opt->loro_center_mix_level >= 0)) {
+ opt->extended_bsi_1 = 1;
+ opt->eac3_mixing_metadata = 1;
+ }
+ if (s->has_surround &&
+ (opt->ltrt_surround_mix_level >= 0 || opt->loro_surround_mix_level >= 0)) {
+ opt->extended_bsi_1 = 1;
+ opt->eac3_mixing_metadata = 1;
+ }
+
+ if (s->eac3) {
+ /* determine info metadata use */
+ if (avctx->audio_service_type != AV_AUDIO_SERVICE_TYPE_MAIN)
+ opt->eac3_info_metadata = 1;
+ if (opt->copyright != AC3ENC_OPT_NONE || opt->original != AC3ENC_OPT_NONE)
+ opt->eac3_info_metadata = 1;
+ if (s->channel_mode == AC3_CHMODE_STEREO &&
+ (opt->dolby_headphone_mode != AC3ENC_OPT_NONE || opt->dolby_surround_mode != AC3ENC_OPT_NONE))
+ opt->eac3_info_metadata = 1;
+ if (s->channel_mode >= AC3_CHMODE_2F2R && opt->dolby_surround_ex_mode != AC3ENC_OPT_NONE)
+ opt->eac3_info_metadata = 1;
+ if (opt->mixing_level != AC3ENC_OPT_NONE || opt->room_type != AC3ENC_OPT_NONE ||
+ opt->ad_converter_type != AC3ENC_OPT_NONE) {
+ opt->audio_production_info = 1;
+ opt->eac3_info_metadata = 1;
+ }
+ } else {
+ /* determine audio production info use */
+ if (opt->mixing_level != AC3ENC_OPT_NONE || opt->room_type != AC3ENC_OPT_NONE)
+ opt->audio_production_info = 1;
+
+ /* determine xbsi2 use */
+ if (s->channel_mode >= AC3_CHMODE_2F2R && opt->dolby_surround_ex_mode != AC3ENC_OPT_NONE)
+ opt->extended_bsi_2 = 1;
+ if (s->channel_mode == AC3_CHMODE_STEREO && opt->dolby_headphone_mode != AC3ENC_OPT_NONE)
+ opt->extended_bsi_2 = 1;
+ if (opt->ad_converter_type != AC3ENC_OPT_NONE)
+ opt->extended_bsi_2 = 1;
+ }
+
+ /* validate AC-3 mixing levels */
+ if (!s->eac3) {
+ if (s->has_center) {
+ validate_mix_level(avctx, "center_mix_level", &opt->center_mix_level,
+ cmixlev_options, CMIXLEV_NUM_OPTIONS, 1, 0,
+ &s->center_mix_level);
+ }
+ if (s->has_surround) {
+ validate_mix_level(avctx, "surround_mix_level", &opt->surround_mix_level,
+ surmixlev_options, SURMIXLEV_NUM_OPTIONS, 1, 0,
+ &s->surround_mix_level);
+ }
+ }
+
+ /* validate extended bsi 1 / mixing metadata */
+ if (opt->extended_bsi_1 || opt->eac3_mixing_metadata) {
+ /* default preferred stereo downmix */
+ if (opt->preferred_stereo_downmix == AC3ENC_OPT_NONE)
+ opt->preferred_stereo_downmix = AC3ENC_OPT_NOT_INDICATED;
+ if (!s->eac3 || s->has_center) {
+ /* validate Lt/Rt center mix level */
+ validate_mix_level(avctx, "ltrt_center_mix_level",
+ &opt->ltrt_center_mix_level, extmixlev_options,
+ EXTMIXLEV_NUM_OPTIONS, 5, 0,
+ &s->ltrt_center_mix_level);
+ /* validate Lo/Ro center mix level */
+ validate_mix_level(avctx, "loro_center_mix_level",
+ &opt->loro_center_mix_level, extmixlev_options,
+ EXTMIXLEV_NUM_OPTIONS, 5, 0,
+ &s->loro_center_mix_level);
+ }
+ if (!s->eac3 || s->has_surround) {
+ /* validate Lt/Rt surround mix level */
+ validate_mix_level(avctx, "ltrt_surround_mix_level",
+ &opt->ltrt_surround_mix_level, extmixlev_options,
+ EXTMIXLEV_NUM_OPTIONS, 6, 3,
+ &s->ltrt_surround_mix_level);
+ /* validate Lo/Ro surround mix level */
+ validate_mix_level(avctx, "loro_surround_mix_level",
+ &opt->loro_surround_mix_level, extmixlev_options,
+ EXTMIXLEV_NUM_OPTIONS, 6, 3,
+ &s->loro_surround_mix_level);
+ }
+ }
+
+ /* validate audio service type / channels combination */
+ if ((avctx->audio_service_type == AV_AUDIO_SERVICE_TYPE_KARAOKE &&
+ avctx->channels == 1) ||
+ ((avctx->audio_service_type == AV_AUDIO_SERVICE_TYPE_COMMENTARY ||
+ avctx->audio_service_type == AV_AUDIO_SERVICE_TYPE_EMERGENCY ||
+ avctx->audio_service_type == AV_AUDIO_SERVICE_TYPE_VOICE_OVER)
+ && avctx->channels > 1)) {
+ av_log(avctx, AV_LOG_ERROR, "invalid audio service type for the "
+ "specified number of channels\n");
+ return AVERROR(EINVAL);
+ }
+
+ /* validate extended bsi 2 / info metadata */
+ if (opt->extended_bsi_2 || opt->eac3_info_metadata) {
+ /* default dolby headphone mode */
+ if (opt->dolby_headphone_mode == AC3ENC_OPT_NONE)
+ opt->dolby_headphone_mode = AC3ENC_OPT_NOT_INDICATED;
+ /* default dolby surround ex mode */
+ if (opt->dolby_surround_ex_mode == AC3ENC_OPT_NONE)
+ opt->dolby_surround_ex_mode = AC3ENC_OPT_NOT_INDICATED;
+ /* default A/D converter type */
+ if (opt->ad_converter_type == AC3ENC_OPT_NONE)
+ opt->ad_converter_type = AC3ENC_OPT_ADCONV_STANDARD;
}
- if (s->has_surround) {
- validate_mix_level(avctx, "surround_mix_level", &opt->surround_mix_level,
- surmixlev_options, SURMIXLEV_NUM_OPTIONS, 1, 0,
- &s->surround_mix_level);
+
+ /* copyright & original defaults */
+ if (!s->eac3 || opt->eac3_info_metadata) {
+ /* default copyright */
+ if (opt->copyright == AC3ENC_OPT_NONE)
+ opt->copyright = AC3ENC_OPT_OFF;
+ /* default original */
+ if (opt->original == AC3ENC_OPT_NONE)
+ opt->original = AC3ENC_OPT_ON;
}
- /* set audio production info flag */
- if (opt->mixing_level >= 0 || opt->room_type >= 0) {
- if (opt->mixing_level < 0) {
+ /* dolby surround mode default */
+ if (!s->eac3 || opt->eac3_info_metadata) {
+ if (opt->dolby_surround_mode == AC3ENC_OPT_NONE)
+ opt->dolby_surround_mode = AC3ENC_OPT_NOT_INDICATED;
+ }
+
+ /* validate audio production info */
+ if (opt->audio_production_info) {
+ if (opt->mixing_level == AC3ENC_OPT_NONE) {
av_log(avctx, AV_LOG_ERROR, "mixing_level must be set if "
"room_type is set\n");
return AVERROR(EINVAL);
return AVERROR(EINVAL);
}
/* default room type */
- if (opt->room_type < 0)
- opt->room_type = 0;
- opt->audio_production_info = 1;
- } else {
- opt->audio_production_info = 0;
- }
-
- /* set extended bsi 1 flag */
- if ((s->has_center || s->has_surround) &&
- (opt->preferred_stereo_downmix >= 0 ||
- opt->ltrt_center_mix_level >= 0 ||
- opt->ltrt_surround_mix_level >= 0 ||
- opt->loro_center_mix_level >= 0 ||
- opt->loro_surround_mix_level >= 0)) {
- /* default preferred stereo downmix */
- if (opt->preferred_stereo_downmix < 0)
- opt->preferred_stereo_downmix = 0;
- /* validate Lt/Rt center mix level */
- validate_mix_level(avctx, "ltrt_center_mix_level",
- &opt->ltrt_center_mix_level, extmixlev_options,
- EXTMIXLEV_NUM_OPTIONS, 5, 0,
- &s->ltrt_center_mix_level);
- /* validate Lt/Rt surround mix level */
- validate_mix_level(avctx, "ltrt_surround_mix_level",
- &opt->ltrt_surround_mix_level, extmixlev_options,
- EXTMIXLEV_NUM_OPTIONS, 6, 3,
- &s->ltrt_surround_mix_level);
- /* validate Lo/Ro center mix level */
- validate_mix_level(avctx, "loro_center_mix_level",
- &opt->loro_center_mix_level, extmixlev_options,
- EXTMIXLEV_NUM_OPTIONS, 5, 0,
- &s->loro_center_mix_level);
- /* validate Lo/Ro surround mix level */
- validate_mix_level(avctx, "loro_surround_mix_level",
- &opt->loro_surround_mix_level, extmixlev_options,
- EXTMIXLEV_NUM_OPTIONS, 6, 3,
- &s->loro_surround_mix_level);
- opt->extended_bsi_1 = 1;
- } else {
- opt->extended_bsi_1 = 0;
- }
-
- /* set extended bsi 2 flag */
- if (opt->dolby_surround_ex_mode >= 0 ||
- opt->dolby_headphone_mode >= 0 ||
- opt->ad_converter_type >= 0) {
- /* default dolby surround ex mode */
- if (opt->dolby_surround_ex_mode < 0)
- opt->dolby_surround_ex_mode = 0;
- /* default dolby headphone mode */
- if (opt->dolby_headphone_mode < 0)
- opt->dolby_headphone_mode = 0;
- /* default A/D converter type */
- if (opt->ad_converter_type < 0)
- opt->ad_converter_type = 0;
- opt->extended_bsi_2 = 1;
- } else {
- opt->extended_bsi_2 = 0;
+ if (opt->room_type == AC3ENC_OPT_NONE)
+ opt->room_type = AC3ENC_OPT_NOT_INDICATED;
}
/* set bitstream id for alternate bitstream syntax */
- if (opt->extended_bsi_1 || opt->extended_bsi_2) {
+ if (!s->eac3 && (opt->extended_bsi_1 || opt->extended_bsi_2)) {
if (s->bitstream_id > 8 && s->bitstream_id < 11) {
static int warn_once = 1;
if (warn_once) {
/**
* Finalize encoding and free any memory allocated by the encoder.
+ *
+ * @param avctx Codec context
*/
av_cold int ff_ac3_encode_close(AVCodecContext *avctx)
{
}
-/**
+/*
* Set channel information during initialization.
*/
static av_cold int set_channel_info(AC3EncodeContext *s, int channels,
if (s->cutoff > (s->sample_rate >> 1))
s->cutoff = s->sample_rate >> 1;
- /* validate audio service type / channels combination */
- if ((avctx->audio_service_type == AV_AUDIO_SERVICE_TYPE_KARAOKE &&
- avctx->channels == 1) ||
- ((avctx->audio_service_type == AV_AUDIO_SERVICE_TYPE_COMMENTARY ||
- avctx->audio_service_type == AV_AUDIO_SERVICE_TYPE_EMERGENCY ||
- avctx->audio_service_type == AV_AUDIO_SERVICE_TYPE_VOICE_OVER)
- && avctx->channels > 1)) {
- av_log(avctx, AV_LOG_ERROR, "invalid audio service type for the "
- "specified number of channels\n");
- return AVERROR(EINVAL);
- }
-
- if (!s->eac3) {
- ret = ff_ac3_validate_metadata(s);
- if (ret)
- return ret;
- }
+ ret = ff_ac3_validate_metadata(s);
+ if (ret)
+ return ret;
s->rematrixing_enabled = s->options.stereo_rematrixing &&
(s->channel_mode == AC3_CHMODE_STEREO);
s->cpl_enabled = s->options.channel_coupling &&
- s->channel_mode >= AC3_CHMODE_STEREO && !s->fixed_point;
+ s->channel_mode >= AC3_CHMODE_STEREO;
return 0;
}
-/**
+/*
* Set bandwidth for all channels.
* The user can optionally supply a cutoff frequency. Otherwise an appropriate
* default value will be used.
/* initialize coupling strategy */
if (s->cpl_enabled) {
- if (s->options.cpl_start >= 0) {
+ if (s->options.cpl_start != AC3ENC_OPT_AUTO) {
cpl_start = s->options.cpl_start;
} else {
cpl_start = ac3_coupling_start_tab[s->channel_mode-2][s->bit_alloc.sr_code][s->frame_size_code/2];
- if (cpl_start < 0)
- s->cpl_enabled = 0;
+ if (cpl_start < 0) {
+ if (s->options.channel_coupling == AC3ENC_OPT_AUTO)
+ s->cpl_enabled = 0;
+ else
+ cpl_start = 15;
+ }
}
}
if (s->cpl_enabled) {
}
-/**
- * Initialize the encoder.
- */
av_cold int ff_ac3_encode_init(AVCodecContext *avctx)
{
AC3EncodeContext *s = avctx->priv_data;