#include "version.h"
-#if FF_API_FAST_MALLOC
-// to provide fast_*alloc
-#include "libavutil/mem.h"
-#endif
-
/**
* @defgroup libavc Encoding/Decoding Library
* @{
* are filled. This situation is handled transparently if you follow the steps
* outlined above.
*
+ * In theory, sending input can result in EAGAIN - this should happen only if
+ * not all output was received. You can use this to structure alternative decode
+ * or encode loops other than the one suggested above. For example, you could
+ * try sending new input on each iteration, and try to receive output if that
+ * returns EAGAIN.
+ *
* End of stream situations. These require "flushing" (aka draining) the codec,
* as the codec might buffer multiple frames or packets internally for
* performance or out of necessity (consider B-frames).
* Unlike with the old video decoding API, multiple frames might result from
* a packet. For audio, splitting the input packet into frames by partially
* decoding packets becomes transparent to the API user. You never need to
- * feed an AVPacket to the API twice.
+ * feed an AVPacket to the API twice (unless it is rejected with EAGAIN - then
+ * no data was read from the packet).
* Additionally, sending a flush/draining packet is required only once.
* - avcodec_encode_video2()/avcodec_encode_audio2():
* Use avcodec_send_frame() to feed input to the encoder, then use
* and will result in arbitrary behavior.
*
* Some codecs might require using the new API; using the old API will return
- * an error when calling it.
+ * an error when calling it. All codecs support the new API.
+ *
+ * A codec is not allowed to return EAGAIN for both sending and receiving. This
+ * would be an invalid state, which could put the codec user into an endless
+ * loop. The API has no concept of time either: it cannot happen that trying to
+ * do avcodec_send_packet() results in EAGAIN, but a repeated call 1 second
+ * later accepts the packet (with no other receive/flush API calls involved).
+ * The API is a strict state machine, and the passage of time is not supposed
+ * to influence it. Some timing-dependent behavior might still be deemed
+ * acceptable in certain cases. But it must never result in both send/receive
+ * returning EAGAIN at the same time at any point. It must also absolutely be
+ * avoided that the current state is "unstable" and can "flip-flop" between
+ * the send/receive APIs allowing progress. For example, it's not allowed that
+ * the codec randomly decides that it actually wants to consume a packet now
+ * instead of returning a frame, after it just returned EAGAIN on an
+ * avcodec_send_packet() call.
* @}
*/
/* video codecs */
AV_CODEC_ID_MPEG1VIDEO,
AV_CODEC_ID_MPEG2VIDEO, ///< preferred ID for MPEG-1/2 video decoding
-#if FF_API_XVMC
- AV_CODEC_ID_MPEG2VIDEO_XVMC,
-#endif /* FF_API_XVMC */
AV_CODEC_ID_H261,
AV_CODEC_ID_H263,
AV_CODEC_ID_RV10,
AV_CODEC_ID_MAGICYUV,
AV_CODEC_ID_TRUEMOTION2RT,
AV_CODEC_ID_AV1,
+ AV_CODEC_ID_PIXLET,
+ AV_CODEC_ID_CFHD,
+ AV_CODEC_ID_FMVC,
+ AV_CODEC_ID_CLEARVIDEO,
/* various PCM "codecs" */
AV_CODEC_ID_FIRST_AUDIO = 0x10000, ///< A dummy id pointing at the start of audio codecs
AV_CODEC_ID_MLP,
AV_CODEC_ID_GSM_MS, /* as found in WAV */
AV_CODEC_ID_ATRAC3,
-#if FF_API_VOXWARE
- AV_CODEC_ID_VOXWARE,
-#endif
AV_CODEC_ID_APE,
AV_CODEC_ID_NELLYMOSER,
AV_CODEC_ID_MUSEPACK8,
*/
#define AV_INPUT_BUFFER_MIN_SIZE 16384
-#if FF_API_WITHOUT_PREFIX
-/**
- * @deprecated use AV_INPUT_BUFFER_PADDING_SIZE instead
- */
-#define FF_INPUT_BUFFER_PADDING_SIZE 8
-
-/**
- * @deprecated use AV_INPUT_BUFFER_MIN_SIZE instead
- */
-#define FF_MIN_BUFFER_SIZE 16384
-#endif /* FF_API_WITHOUT_PREFIX */
-
-/**
- * @ingroup lavc_encoding
- * motion estimation type.
- * @deprecated use codec private option instead
- */
-#if FF_API_MOTION_EST
-enum Motion_Est_ID {
- ME_ZERO = 1, ///< no search, that is use 0,0 vector whenever one is needed
- ME_FULL,
- ME_LOG,
- ME_PHODS,
- ME_EPZS, ///< enhanced predictive zonal search
- ME_X1, ///< reserved for experiments
- ME_HEX, ///< hexagon based search
- ME_UMH, ///< uneven multi-hexagon search
- ME_TESA, ///< transformed exhaustive search algorithm
-};
-#endif
-
/**
* @ingroup lavc_decoding
*/
float quality_factor;
} RcOverride;
-#if FF_API_MAX_BFRAMES
-/**
- * @deprecated there is no libavcodec-wide limit on the number of B-frames
- */
-#define FF_MAX_B_FRAMES 16
-#endif
-
/* encoding support
These flags can be passed in AVCodecContext.flags before initialization.
Note: Not everything is supported yet.
*/
#define AV_CODEC_CAP_VARIABLE_FRAME_SIZE (1 << 16)
-#if FF_API_WITHOUT_PREFIX
-/**
- * Allow decoders to produce frames with data planes that are not aligned
- * to CPU requirements (e.g. due to cropping).
- */
-#define CODEC_FLAG_UNALIGNED 0x0001
-#define CODEC_FLAG_QSCALE 0x0002 ///< Use fixed qscale.
-#define CODEC_FLAG_4MV 0x0004 ///< 4 MV per MB allowed / advanced prediction for H.263.
-#define CODEC_FLAG_OUTPUT_CORRUPT 0x0008 ///< Output even those frames that might be corrupted
-#define CODEC_FLAG_QPEL 0x0010 ///< Use qpel MC.
-#if FF_API_GMC
-/**
- * @deprecated use the "gmc" private option of the libxvid encoder
- */
-#define CODEC_FLAG_GMC 0x0020 ///< Use GMC.
-#endif
-#if FF_API_MV0
-/**
- * @deprecated use the flag "mv0" in the "mpv_flags" private option of the
- * mpegvideo encoders
- */
-#define CODEC_FLAG_MV0 0x0040
-#endif
-#if FF_API_INPUT_PRESERVED
-/**
- * @deprecated passing reference-counted frames to the encoders replaces this
- * flag
- */
-#define CODEC_FLAG_INPUT_PRESERVED 0x0100
-#endif
-#define CODEC_FLAG_PASS1 0x0200 ///< Use internal 2pass ratecontrol in first pass mode.
-#define CODEC_FLAG_PASS2 0x0400 ///< Use internal 2pass ratecontrol in second pass mode.
-#define CODEC_FLAG_GRAY 0x2000 ///< Only decode/encode grayscale.
-#if FF_API_EMU_EDGE
-/**
- * @deprecated edges are not used/required anymore. I.e. this flag is now always
- * set.
- */
-#define CODEC_FLAG_EMU_EDGE 0x4000
-#endif
-#define CODEC_FLAG_PSNR 0x8000 ///< error[?] variables will be set during encoding.
-#define CODEC_FLAG_TRUNCATED 0x00010000 /** Input bitstream might be truncated at a random
- location instead of only at frame boundaries. */
-#if FF_API_NORMALIZE_AQP
-/**
- * @deprecated use the flag "naq" in the "mpv_flags" private option of the
- * mpegvideo encoders
- */
-#define CODEC_FLAG_NORMALIZE_AQP 0x00020000
-#endif
-#define CODEC_FLAG_INTERLACED_DCT 0x00040000 ///< Use interlaced DCT.
-#define CODEC_FLAG_LOW_DELAY 0x00080000 ///< Force low delay.
-#define CODEC_FLAG_GLOBAL_HEADER 0x00400000 ///< Place global headers in extradata instead of every keyframe.
-#define CODEC_FLAG_BITEXACT 0x00800000 ///< Use only bitexact stuff (except (I)DCT).
-/* Fx : Flag for H.263+ extra options */
-#define CODEC_FLAG_AC_PRED 0x01000000 ///< H.263 advanced intra coding / MPEG-4 AC prediction
-#define CODEC_FLAG_LOOP_FILTER 0x00000800 ///< loop filter
-#define CODEC_FLAG_INTERLACED_ME 0x20000000 ///< interlaced motion estimation
-#define CODEC_FLAG_CLOSED_GOP 0x80000000
-#define CODEC_FLAG2_FAST 0x00000001 ///< Allow non spec compliant speedup tricks.
-#define CODEC_FLAG2_NO_OUTPUT 0x00000004 ///< Skip bitstream encoding.
-#define CODEC_FLAG2_LOCAL_HEADER 0x00000008 ///< Place global headers at every keyframe instead of in extradata.
-#define CODEC_FLAG2_IGNORE_CROP 0x00010000 ///< Discard cropping information from SPS.
-
-#define CODEC_FLAG2_CHUNKS 0x00008000 ///< Input bitstream might be truncated at a packet boundaries instead of only at frame boundaries.
-
-/* Unsupported options :
- * Syntax Arithmetic coding (SAC)
- * Reference Picture Selection
- * Independent Segment Decoding */
-/* /Fx */
-/* codec capabilities */
-
-#define CODEC_CAP_DRAW_HORIZ_BAND 0x0001 ///< Decoder can use draw_horiz_band callback.
-/**
- * Codec uses get_buffer() for allocating buffers and supports custom allocators.
- * If not set, it might not use get_buffer() at all or use operations that
- * assume the buffer was allocated by avcodec_default_get_buffer.
- */
-#define CODEC_CAP_DR1 0x0002
-#define CODEC_CAP_TRUNCATED 0x0008
-#if FF_API_XVMC
-/* Codec can export data for HW decoding (XvMC). */
-#define CODEC_CAP_HWACCEL 0x0010
-#endif /* FF_API_XVMC */
-/**
- * Encoder or decoder requires flushing with NULL input at the end in order to
- * give the complete and correct output.
- *
- * NOTE: If this flag is not set, the codec is guaranteed to never be fed with
- * with NULL data. The user can still send NULL data to the public encode
- * or decode function, but libavcodec will not pass it along to the codec
- * unless this flag is set.
- *
- * Decoders:
- * The decoder has a non-zero delay and needs to be fed with avpkt->data=NULL,
- * avpkt->size=0 at the end to get the delayed data until the decoder no longer
- * returns frames.
- *
- * Encoders:
- * The encoder needs to be fed with NULL data at the end of encoding until the
- * encoder no longer returns data.
- *
- * NOTE: For encoders implementing the AVCodec.encode2() function, setting this
- * flag also means that the encoder must set the pts and duration for
- * each output packet. If this flag is not set, the pts and duration will
- * be determined by libavcodec from the input frame.
- */
-#define CODEC_CAP_DELAY 0x0020
-/**
- * Codec can be fed a final frame with a smaller size.
- * This can be used to prevent truncation of the last audio samples.
- */
-#define CODEC_CAP_SMALL_LAST_FRAME 0x0040
-#if FF_API_CAP_VDPAU
-/**
- * Codec can export data for HW decoding (VDPAU).
- */
-#define CODEC_CAP_HWACCEL_VDPAU 0x0080
-#endif
-/**
- * Codec can output multiple frames per AVPacket
- * Normally demuxers return one frame at a time, demuxers which do not do
- * are connected to a parser to split what they return into proper frames.
- * This flag is reserved to the very rare category of codecs which have a
- * bitstream that cannot be split into frames without timeconsuming
- * operations like full decoding. Demuxers carrying such bitstreams thus
- * may return multiple frames in a packet. This has many disadvantages like
- * prohibiting stream copy in many cases thus it should only be considered
- * as a last resort.
- */
-#define CODEC_CAP_SUBFRAMES 0x0100
-/**
- * Codec is experimental and is thus avoided in favor of non experimental
- * encoders
- */
-#define CODEC_CAP_EXPERIMENTAL 0x0200
-/**
- * Codec should fill in channel configuration and samplerate instead of container
- */
-#define CODEC_CAP_CHANNEL_CONF 0x0400
-#if FF_API_NEG_LINESIZES
-/**
- * @deprecated no codecs use this capability
- */
-#define CODEC_CAP_NEG_LINESIZES 0x0800
-#endif
-/**
- * Codec supports frame-level multithreading.
- */
-#define CODEC_CAP_FRAME_THREADS 0x1000
-/**
- * Codec supports slice-based (or partition-based) multithreading.
- */
-#define CODEC_CAP_SLICE_THREADS 0x2000
-/**
- * Codec supports changed parameters at any point.
- */
-#define CODEC_CAP_PARAM_CHANGE 0x4000
-/**
- * Codec supports avctx->thread_count == 0 (auto).
- */
-#define CODEC_CAP_AUTO_THREADS 0x8000
-/**
- * Audio encoder supports receiving a different number of samples in each call.
- */
-#define CODEC_CAP_VARIABLE_FRAME_SIZE 0x10000
-#endif /* FF_API_WITHOUT_PREFIX */
-
-#if FF_API_MB_TYPE
-//The following defines may change, don't expect compatibility if you use them.
-#define MB_TYPE_INTRA4x4 0x0001
-#define MB_TYPE_INTRA16x16 0x0002 //FIXME H.264-specific
-#define MB_TYPE_INTRA_PCM 0x0004 //FIXME H.264-specific
-#define MB_TYPE_16x16 0x0008
-#define MB_TYPE_16x8 0x0010
-#define MB_TYPE_8x16 0x0020
-#define MB_TYPE_8x8 0x0040
-#define MB_TYPE_INTERLACED 0x0080
-#define MB_TYPE_DIRECT2 0x0100 //FIXME
-#define MB_TYPE_ACPRED 0x0200
-#define MB_TYPE_GMC 0x0400
-#define MB_TYPE_SKIP 0x0800
-#define MB_TYPE_P0L0 0x1000
-#define MB_TYPE_P1L0 0x2000
-#define MB_TYPE_P0L1 0x4000
-#define MB_TYPE_P1L1 0x8000
-#define MB_TYPE_L0 (MB_TYPE_P0L0 | MB_TYPE_P1L0)
-#define MB_TYPE_L1 (MB_TYPE_P0L1 | MB_TYPE_P1L1)
-#define MB_TYPE_L0L1 (MB_TYPE_L0 | MB_TYPE_L1)
-#define MB_TYPE_QUANT 0x00010000
-#define MB_TYPE_CBP 0x00020000
-// Note bits 24-31 are reserved for codec specific use (H.264 ref0, MPEG-1 0mv, ...)
-#endif
-
/**
* Pan Scan area.
* This specifies the area which should be displayed.
uint64_t vbv_delay;
} AVCPBProperties;
-#if FF_API_QSCALE_TYPE
-#define FF_QSCALE_TYPE_MPEG1 0
-#define FF_QSCALE_TYPE_MPEG2 1
-#define FF_QSCALE_TYPE_H264 2
-#define FF_QSCALE_TYPE_VP56 3
-#endif
-
/**
* The decoder will keep a reference to the frame and may reuse it later.
*/
enum AVMediaType codec_type; /* see AVMEDIA_TYPE_xxx */
const struct AVCodec *codec;
-#if FF_API_CODEC_NAME
- /**
- * @deprecated this field is not used for anything in libavcodec
- */
- attribute_deprecated
- char codec_name[32];
-#endif
enum AVCodecID codec_id; /* see AV_CODEC_ID_xxx */
/**
*/
unsigned int codec_tag;
-#if FF_API_STREAM_CODEC_TAG
- /**
- * @deprecated this field is unused
- */
- attribute_deprecated
- unsigned int stream_codec_tag;
-#endif
-
void *priv_data;
/**
*/
int coded_width, coded_height;
-#if FF_API_ASPECT_EXTENDED
-#define FF_ASPECT_EXTENDED 15
-#endif
-
/**
* the number of pictures in a group of pictures, or 0 for intra_only
* - encoding: Set by user.
*/
enum AVPixelFormat pix_fmt;
-#if FF_API_MOTION_EST
- /**
- * This option does nothing
- * @deprecated use codec private options instead
- */
- attribute_deprecated int me_method;
-#endif
-
/**
* If non NULL, 'draw_horiz_band' is called by the libavcodec
* decoder to draw a horizontal band. It improves cache usage. Not
*/
float b_quant_factor;
-#if FF_API_RC_STRATEGY
- /** @deprecated use codec private option instead */
- attribute_deprecated int rc_strategy;
-#define FF_RC_STRATEGY_XVID 1
-#endif
-
#if FF_API_PRIVATE_OPT
/** @deprecated use encoder private options instead */
attribute_deprecated
*/
int me_subpel_quality;
-#if FF_API_AFD
- /**
- * DTG active format information (additional aspect ratio
- * information only used in DVB MPEG-2 transport streams)
- * 0 if not set.
- *
- * - encoding: unused
- * - decoding: Set by decoder.
- * @deprecated Deprecated in favor of AVSideData
- */
- attribute_deprecated int dtg_active_format;
-#define FF_DTG_AFD_SAME 8
-#define FF_DTG_AFD_4_3 9
-#define FF_DTG_AFD_16_9 10
-#define FF_DTG_AFD_14_9 11
-#define FF_DTG_AFD_4_3_SP_14_9 13
-#define FF_DTG_AFD_16_9_SP_14_9 14
-#define FF_DTG_AFD_SP_4_3 15
-#endif /* FF_API_AFD */
-
/**
* maximum motion estimation search range in subpel units
* If 0 then no limit.
*/
int me_range;
-#if FF_API_QUANT_BIAS
- /**
- * @deprecated use encoder private option instead
- */
- attribute_deprecated int intra_quant_bias;
-#define FF_DEFAULT_QUANT_BIAS 999999
-
- /**
- * @deprecated use encoder private option instead
- */
- attribute_deprecated int inter_quant_bias;
-#endif
-
/**
* slice flags
* - encoding: unused
#define SLICE_FLAG_ALLOW_FIELD 0x0002 ///< allow draw_horiz_band() with field slices (MPEG-2 field pics)
#define SLICE_FLAG_ALLOW_PLANE 0x0004 ///< allow draw_horiz_band() with 1 component at a time (SVQ1)
-#if FF_API_XVMC
- /**
- * XVideo Motion Acceleration
- * - encoding: forbidden
- * - decoding: set by decoder
- * @deprecated XvMC support is slated for removal.
- */
- attribute_deprecated int xvmc_acceleration;
-#endif /* FF_API_XVMC */
-
/**
* macroblock decision mode
* - encoding: Set by user.
int noise_reduction;
#endif
-#if FF_API_MPV_OPT
- /**
- * @deprecated this field is unused
- */
- attribute_deprecated
- int me_threshold;
-
- /**
- * @deprecated this field is unused
- */
- attribute_deprecated
- int mb_threshold;
-#endif
-
/**
* precision of the intra DC coefficient - 8
* - encoding: Set by user.
*/
int skip_bottom;
-#if FF_API_MPV_OPT
- /**
- * @deprecated use encoder private options instead
- */
- attribute_deprecated
- float border_masking;
-#endif
-
/**
* minimum MB Lagrange multiplier
* - encoding: Set by user.
int chromaoffset;
#endif
-#if FF_API_UNUSED_MEMBERS
- /**
- * Multiplied by qscale for each frame and added to scene_change_score.
- * - encoding: Set by user.
- * - decoding: unused
- */
- attribute_deprecated int scenechange_factor;
-#endif
-
/**
* Note: Value depends upon the compare function used for fullpel ME.
* - encoding: Set by user.
* - encoding: unused
* - decoding: set by the caller before avcodec_open2().
*/
- int refcounted_frames;
+ attribute_deprecated int refcounted_frames;
/* - encoding parameters */
float qcompress; ///< amount of qscale change between easy & hard scenes (0.0-1.0)
*/
int max_qdiff;
-#if FF_API_MPV_OPT
- /**
- * @deprecated use encoder private options instead
- */
- attribute_deprecated
- float rc_qsquish;
-
- attribute_deprecated
- float rc_qmod_amp;
- attribute_deprecated
- int rc_qmod_freq;
-#endif
-
/**
* decoder bitstream buffer size
* - encoding: Set by user.
int rc_override_count;
RcOverride *rc_override;
-#if FF_API_MPV_OPT
- /**
- * @deprecated use encoder private options instead
- */
- attribute_deprecated
- const char *rc_eq;
-#endif
-
/**
* maximum bitrate
* - encoding: Set by user.
*/
int rc_min_rate;
-#if FF_API_MPV_OPT
- /**
- * @deprecated use encoder private options instead
- */
- attribute_deprecated
- float rc_buffer_aggressivity;
-
- attribute_deprecated
- float rc_initial_cplx;
-#endif
-
/**
* Ratecontrol attempt to use, at maximum, <value> of what can be used without an underflow.
* - encoding: Set by user.
#define FF_CODER_TYPE_AC 1
#define FF_CODER_TYPE_RAW 2
#define FF_CODER_TYPE_RLE 3
-#if FF_API_UNUSED_MEMBERS
-#define FF_CODER_TYPE_DEFLATE 4
-#endif /* FF_API_UNUSED_MEMBERS */
/**
* @deprecated use encoder private options instead
*/
int context_model;
#endif
-#if FF_API_MPV_OPT
- /**
- * @deprecated use encoder private options instead
- */
- attribute_deprecated
- int lmin;
-
- /**
- * @deprecated use encoder private options instead
- */
- attribute_deprecated
- int lmax;
-#endif
-
#if FF_API_PRIVATE_OPT
/** @deprecated use encoder private options instead */
attribute_deprecated
*/
int workaround_bugs;
#define FF_BUG_AUTODETECT 1 ///< autodetection
-#if FF_API_OLD_MSMPEG4
-#define FF_BUG_OLD_MSMPEG4 2
-#endif
#define FF_BUG_XVID_ILACE 4
#define FF_BUG_UMP4 8
#define FF_BUG_NO_PADDING 16
#define FF_BUG_AMV 32
-#if FF_API_AC_VLC
-#define FF_BUG_AC_VLC 0 ///< Will be removed, libavcodec can now handle these non-compliant files by default.
-#endif
#define FF_BUG_QPEL_CHROMA 64
#define FF_BUG_STD_QPEL 128
#define FF_BUG_QPEL_CHROMA2 256
#define FF_DEBUG_BITSTREAM 4
#define FF_DEBUG_MB_TYPE 8
#define FF_DEBUG_QP 16
-#if FF_API_DEBUG_MV
-/**
- * @deprecated this option does nothing
- */
-#define FF_DEBUG_MV 32
-#endif
#define FF_DEBUG_DCT_COEFF 0x00000040
#define FF_DEBUG_SKIP 0x00000080
#define FF_DEBUG_STARTCODE 0x00000100
-#if FF_API_UNUSED_MEMBERS
-#define FF_DEBUG_PTS 0x00000200
-#endif /* FF_API_UNUSED_MEMBERS */
#define FF_DEBUG_ER 0x00000400
#define FF_DEBUG_MMCO 0x00000800
#define FF_DEBUG_BUGS 0x00001000
-#if FF_API_DEBUG_MV
-#define FF_DEBUG_VIS_QP 0x00002000
-#define FF_DEBUG_VIS_MB_TYPE 0x00004000
-#endif
#define FF_DEBUG_BUFFERS 0x00008000
#define FF_DEBUG_THREADS 0x00010000
-#if FF_API_DEBUG_MV
- /**
- * @deprecated this option does not have any effect
- */
- attribute_deprecated
- int debug_mv;
-#define FF_DEBUG_VIS_MV_P_FOR 0x00000001 // visualize forward predicted MVs of P-frames
-#define FF_DEBUG_VIS_MV_B_FOR 0x00000002 // visualize forward predicted MVs of B-frames
-#define FF_DEBUG_VIS_MV_B_BACK 0x00000004 // visualize backward predicted MVs of B-frames
-#endif
-
/**
* Error recognition; may misdetect some more or less valid parts as errors.
* - encoding: unused
#define FF_IDCT_SIMPLEMMX 3
#define FF_IDCT_ARM 7
#define FF_IDCT_ALTIVEC 8
-#if FF_API_ARCH_SH4
-#define FF_IDCT_SH4 9
-#endif
#define FF_IDCT_SIMPLEARM 10
-#if FF_API_UNUSED_MEMBERS
-#define FF_IDCT_IPP 13
-#endif /* FF_API_UNUSED_MEMBERS */
#define FF_IDCT_XVID 14
-#if FF_API_IDCT_XVIDMMX
-#define FF_IDCT_XVIDMMX 14
-#endif /* FF_API_IDCT_XVIDMMX */
#define FF_IDCT_SIMPLEARMV5TE 16
#define FF_IDCT_SIMPLEARMV6 17
-#if FF_API_ARCH_SPARC
-#define FF_IDCT_SIMPLEVIS 18
-#endif
#define FF_IDCT_FAAN 20
#define FF_IDCT_SIMPLENEON 22
-#if FF_API_ARCH_ALPHA
-#define FF_IDCT_SIMPLEALPHA 23
-#endif
/**
* bits per sample/pixel from the demuxer (needed for huffyuv).
*/
int bits_per_raw_sample;
-#if FF_API_LOWRES
- /**
- * low resolution decoding, 1-> 1/2 size, 2->1/4 size
- * - encoding: unused
- * - decoding: Set by user.
- *
- * @deprecated use decoder private options instead
- */
- attribute_deprecated int lowres;
-#endif
-
#if FF_API_CODED_FRAME
/**
* the picture in the bitstream
uint8_t *subtitle_header;
int subtitle_header_size;
-#if FF_API_ERROR_RATE
- /**
- * @deprecated use the 'error_rate' private AVOption of the mpegvideo
- * encoders
- */
- attribute_deprecated
- int error_rate;
-#endif
-
#if FF_API_VBV_DELAY
/**
* VBV delay coded in the last frame (in periods of a 27 MHz clock).
/**
* A reference to the AVHWFramesContext describing the input (for encoding)
* or output (decoding) frames. The reference is set by the caller and
- * afterwards owned (and freed) by libavcodec.
+ * afterwards owned (and freed) by libavcodec - it should never be read by
+ * the caller after being set.
*
* - decoding: This field should be set by the caller from the get_format()
* callback. The previous reference (if any) will always be
* This field should be set before avcodec_open2() is called.
*/
AVBufferRef *hw_frames_ctx;
+
+ /**
+ * Video decoding only. Certain video codecs support cropping, meaning that
+ * only a sub-rectangle of the decoded frame is intended for display. This
+ * option controls how cropping is handled by libavcodec.
+ *
+ * When set to 1 (the default), libavcodec will apply cropping internally.
+ * I.e. it will modify the output frame width/height fields and offset the
+ * data pointers (only by as much as possible while preserving alignment, or
+ * by the full amount if the AV_CODEC_FLAG_UNALIGNED flag is set) so that
+ * the frames output by the decoder refer only to the cropped area. The
+ * crop_* fields of the output frames will be zero.
+ *
+ * When set to 0, the width/height fields of the output frames will be set
+ * to the coded dimensions and the crop_* fields will describe the cropping
+ * rectangle. Applying the cropping is left to the caller.
+ *
+ * @warning When hardware acceleration with opaque output frames is used,
+ * libavcodec is unable to apply cropping from the top/left border.
+ *
+ * @note when this option is set to zero, the width/height fields of the
+ * AVCodecContext and output AVFrames have different meanings. The codec
+ * context fields store display dimensions (with the coded dimensions in
+ * coded_width/height), while the frame fields store the coded dimensions
+ * (with the display dimensions being determined by the crop_* fields).
+ */
+ int apply_cropping;
+
+ /**
+ * A reference to the AVHWDeviceContext describing the device which will
+ * be used by a hardware encoder/decoder. The reference is set by the
+ * caller and afterwards owned (and freed) by libavcodec.
+ *
+ * This should be used if either the codec device does not require
+ * hardware frames or any that are used are to be allocated internally by
+ * libavcodec. If the user wishes to supply any of the frames used as
+ * encoder input or decoder output then hw_frames_ctx should be used
+ * instead. When hw_frames_ctx is set in get_format() for a decoder, this
+ * field will be ignored while decoding the associated stream segment, but
+ * may again be used on a following one after another get_format() call.
+ *
+ * For both encoders and decoders this field should be set before
+ * avcodec_open2() is called and must not be written to thereafter.
+ *
+ * Note that some decoders may require this field to be set initially in
+ * order to support hw_frames_ctx at all - in that case, all frames
+ * contexts used must be created on the same device.
+ */
+ AVBufferRef *hw_device_ctx;
+
+ /**
+ * Bit set of AV_HWACCEL_FLAG_* flags, which affect hardware accelerated
+ * decoding (if active).
+ * - encoding: unused
+ * - decoding: Set by user (either before avcodec_open2(), or in the
+ * AVCodecContext.get_format callback)
+ */
+ int hwaccel_flags;
} AVCodecContext;
/**
const int *supported_samplerates; ///< array of supported audio samplerates, or NULL if unknown, array is terminated by 0
const enum AVSampleFormat *sample_fmts; ///< array of supported sample formats, or NULL if unknown, array is terminated by -1
const uint64_t *channel_layouts; ///< array of support channel layouts, or NULL if unknown. array is terminated by 0
-#if FF_API_LOWRES
- attribute_deprecated uint8_t max_lowres; ///< maximum value for lowres supported by the decoder
-#endif
const AVClass *priv_class; ///< AVClass for the private context
const AVProfile *profiles; ///< array of recognized profiles, or NULL if unknown, array is terminated by {FF_PROFILE_UNKNOWN}
* See FF_CODEC_CAP_* in internal.h
*/
int caps_internal;
+
+ /**
+ * Decoding only, a comma-separated list of bitstream filters to apply to
+ * packets before decoding.
+ */
+ const char *bsfs;
} AVCodec;
/**
* AVCodecInternal.hwaccel_priv_data.
*/
int priv_data_size;
+
+ /**
+ * Internal hwaccel capabilities.
+ */
+ int caps_internal;
} AVHWAccel;
/**
*/
#define AV_HWACCEL_FLAG_ALLOW_HIGH_DEPTH (1 << 1)
+/**
+ * Hardware acceleration should still be attempted for decoding when the
+ * codec profile does not match the reported capabilities of the hardware.
+ *
+ * For example, this can be used to try to decode baseline profile H.264
+ * streams in hardware - it will often succeed, because many streams marked
+ * as baseline profile actually conform to constrained baseline profile.
+ *
+ * @warning If the stream is actually not supported then the behaviour is
+ * undefined, and may include returning entirely incorrect output
+ * while indicating success.
+ */
+#define AV_HWACCEL_FLAG_ALLOW_PROFILE_MISMATCH (1 << 2)
+
/**
* @}
*/
*/
int avcodec_default_get_buffer2(AVCodecContext *s, AVFrame *frame, int flags);
-#if FF_API_EMU_EDGE
-/**
- * Return the amount of padding in pixels which the get_buffer callback must
- * provide around the edge of the image for codecs which do not have the
- * CODEC_FLAG_EMU_EDGE flag.
- *
- * @return Required padding in pixels.
- *
- * @deprecated CODEC_FLAG_EMU_EDGE is deprecated, so this function is no longer
- * needed
- */
-attribute_deprecated
-unsigned avcodec_get_edge_width(void);
-#endif
-
/**
* Modify width and height values so that they will result in a memory
* buffer that is acceptable for the codec if you do not use any horizontal
* a flush packet.
*
* @return 0 on success, otherwise negative error code:
- * AVERROR(EAGAIN): input is not accepted right now - the packet must be
- * resent after trying to read output
+ * AVERROR(EAGAIN): input is not accepted in the current state - user
+ * must read output with avcodec_receive_frame() (once
+ * all output is read, the packet should be resent, and
+ * the call will not fail with EAGAIN).
* AVERROR_EOF: the decoder has been flushed, and no new packets can
* be sent to it (also returned if more than 1 flush
* packet is sent)
*
* @return
* 0: success, a frame was returned
- * AVERROR(EAGAIN): output is not available right now - user must try
+ * AVERROR(EAGAIN): output is not available in this state - user must try
* to send new input
* AVERROR_EOF: the decoder has been fully flushed, and there will be
* no more output frames
* avctx->frame_size for all frames except the last.
* The final frame may be smaller than avctx->frame_size.
* @return 0 on success, otherwise negative error code:
- * AVERROR(EAGAIN): input is not accepted right now - the frame must be
- * resent after trying to read output packets
+ * AVERROR(EAGAIN): input is not accepted in the current state - user
+ * must read output with avcodec_receive_packet() (once
+ * all output is read, the packet should be resent, and
+ * the call will not fail with EAGAIN).
* AVERROR_EOF: the encoder has been flushed, and no new frames can
* be sent to it
* AVERROR(EINVAL): codec not opened, refcounted_frames not set, it is a
* encoder. Note that the function will always call
* av_frame_unref(frame) before doing anything else.
* @return 0 on success, otherwise negative error code:
- * AVERROR(EAGAIN): output is not available right now - user must try
- * to send input
+ * AVERROR(EAGAIN): output is not available in the current state - user
+ * must try to send input
* AVERROR_EOF: the encoder has been fully flushed, and there will be
* no more output packets
* AVERROR(EINVAL): codec not opened, or it is an encoder
* @{
*/
-/**
- * @deprecated Use av_pix_fmt_get_chroma_sub_sample
- */
-
-void attribute_deprecated avcodec_get_chroma_sub_sample(enum AVPixelFormat pix_fmt, int *h_shift, int *v_shift);
-
/**
* Return a value representing the fourCC code associated to the
* pixel format pix_fmt, or 0 if no associated fourCC code can be
* @}
*/
-#if FF_API_SET_DIMENSIONS
-/**
- * @deprecated this function is not supposed to be used from outside of lavc
- */
-attribute_deprecated
-void avcodec_set_dimensions(AVCodecContext *s, int width, int height);
-#endif
-
/**
* Put a string representing the codec tag codec_tag in buf.
*
*/
unsigned int av_xiphlacing(unsigned char *s, unsigned int v);
-#if FF_API_MISSING_SAMPLE
-/**
- * Log a generic warning message about a missing feature. This function is
- * intended to be used internally by Libav (libavcodec, libavformat, etc.)
- * only, and would normally not be used by applications.
- * @param[in] avc a pointer to an arbitrary struct of which the first field is
- * a pointer to an AVClass struct
- * @param[in] feature string containing the name of the missing feature
- * @param[in] want_sample indicates if samples are wanted which exhibit this feature.
- * If want_sample is non-zero, additional verbiage will be added to the log
- * message which tells the user how to report samples to the development
- * mailing list.
- * @deprecated Use avpriv_report_missing_feature() instead.
- */
-attribute_deprecated
-void av_log_missing_feature(void *avc, const char *feature, int want_sample);
-
-/**
- * Log a generic warning message asking for a sample. This function is
- * intended to be used internally by Libav (libavcodec, libavformat, etc.)
- * only, and would normally not be used by applications.
- * @param[in] avc a pointer to an arbitrary struct of which the first field is
- * a pointer to an AVClass struct
- * @param[in] msg string containing an optional message, or NULL if no message
- * @deprecated Use avpriv_request_sample() instead.
- */
-attribute_deprecated
-void av_log_ask_for_sample(void *avc, const char *msg, ...) av_printf_format(2, 3);
-#endif /* FF_API_MISSING_SAMPLE */
-
/**
* Register the hardware accelerator hwaccel.
*/