#include "version.h"
-#if FF_API_FAST_MALLOC
-// to provide fast_*alloc
-#include "libavutil/mem.h"
-#endif
-
/**
* @defgroup libavc Encoding/Decoding Library
* @{
* @{
* @}
* @}
+ */
+
+/**
+ * @ingroup libavc
+ * @defgroup lavc_encdec send/receive encoding and decoding API overview
+ * @{
*
+ * The avcodec_send_packet()/avcodec_receive_frame()/avcodec_send_frame()/
+ * avcodec_receive_packet() functions provide an encode/decode API, which
+ * decouples input and output.
+ *
+ * The API is very similar for encoding/decoding and audio/video, and works as
+ * follows:
+ * - Set up and open the AVCodecContext as usual.
+ * - Send valid input:
+ * - For decoding, call avcodec_send_packet() to give the decoder raw
+ * compressed data in an AVPacket.
+ * - For encoding, call avcodec_send_frame() to give the decoder an AVFrame
+ * containing uncompressed audio or video.
+ * In both cases, it is recommended that AVPackets and AVFrames are
+ * refcounted, or libavcodec might have to copy the input data. (libavformat
+ * always returns refcounted AVPackets, and av_frame_get_buffer() allocates
+ * refcounted AVFrames.)
+ * - Receive output in a loop. Periodically call one of the avcodec_receive_*()
+ * functions and process their output:
+ * - For decoding, call avcodec_receive_frame(). On success, it will return
+ * an AVFrame containing uncompressed audio or video data.
+ * - For encoding, call avcodec_receive_packet(). On success, it will return
+ * an AVPacket with a compressed frame.
+ * Repeat this call until it returns AVERROR(EAGAIN) or an error. The
+ * AVERROR(EAGAIN) return value means that new input data is required to
+ * return new output. In this case, continue with sending input. For each
+ * input frame/packet, the codec will typically return 1 output frame/packet,
+ * but it can also be 0 or more than 1.
+ *
+ * At the beginning of decoding or encoding, the codec might accept multiple
+ * input frames/packets without returning a frame, until its internal buffers
+ * are filled. This situation is handled transparently if you follow the steps
+ * outlined above.
+ *
+ * In theory, sending input can result in EAGAIN - this should happen only if
+ * not all output was received. You can use this to structure alternative decode
+ * or encode loops other than the one suggested above. For example, you could
+ * try sending new input on each iteration, and try to receive output if that
+ * returns EAGAIN.
+ *
+ * End of stream situations. These require "flushing" (aka draining) the codec,
+ * as the codec might buffer multiple frames or packets internally for
+ * performance or out of necessity (consider B-frames).
+ * This is handled as follows:
+ * - Instead of valid input, send NULL to the avcodec_send_packet() (decoding)
+ * or avcodec_send_frame() (encoding) functions. This will enter draining
+ * mode.
+ * - Call avcodec_receive_frame() (decoding) or avcodec_receive_packet()
+ * (encoding) in a loop until AVERROR_EOF is returned. The functions will
+ * not return AVERROR(EAGAIN), unless you forgot to enter draining mode.
+ * - Before decoding can be resumed again, the codec has to be reset with
+ * avcodec_flush_buffers().
+ *
+ * Using the API as outlined above is highly recommended. But it is also
+ * possible to call functions outside of this rigid schema. For example, you can
+ * call avcodec_send_packet() repeatedly without calling
+ * avcodec_receive_frame(). In this case, avcodec_send_packet() will succeed
+ * until the codec's internal buffer has been filled up (which is typically of
+ * size 1 per output frame, after initial input), and then reject input with
+ * AVERROR(EAGAIN). Once it starts rejecting input, you have no choice but to
+ * read at least some output.
+ *
+ * Not all codecs will follow a rigid and predictable dataflow; the only
+ * guarantee is that an AVERROR(EAGAIN) return value on a send/receive call on
+ * one end implies that a receive/send call on the other end will succeed. In
+ * general, no codec will permit unlimited buffering of input or output.
+ *
+ * This API replaces the following legacy functions:
+ * - avcodec_decode_video2() and avcodec_decode_audio4():
+ * Use avcodec_send_packet() to feed input to the decoder, then use
+ * avcodec_receive_frame() to receive decoded frames after each packet.
+ * Unlike with the old video decoding API, multiple frames might result from
+ * a packet. For audio, splitting the input packet into frames by partially
+ * decoding packets becomes transparent to the API user. You never need to
+ * feed an AVPacket to the API twice (unless it is rejected with EAGAIN - then
+ * no data was read from the packet).
+ * Additionally, sending a flush/draining packet is required only once.
+ * - avcodec_encode_video2()/avcodec_encode_audio2():
+ * Use avcodec_send_frame() to feed input to the encoder, then use
+ * avcodec_receive_packet() to receive encoded packets.
+ * Providing user-allocated buffers for avcodec_receive_packet() is not
+ * possible.
+ * - The new API does not handle subtitles yet.
+ *
+ * Mixing new and old function calls on the same AVCodecContext is not allowed,
+ * and will result in arbitrary behavior.
+ *
+ * Some codecs might require using the new API; using the old API will return
+ * an error when calling it. All codecs support the new API.
+ *
+ * A codec is not allowed to return EAGAIN for both sending and receiving. This
+ * would be an invalid state, which could put the codec user into an endless
+ * loop. The API has no concept of time either: it cannot happen that trying to
+ * do avcodec_send_packet() results in EAGAIN, but a repeated call 1 second
+ * later accepts the packet (with no other receive/flush API calls involved).
+ * The API is a strict state machine, and the passage of time is not supposed
+ * to influence it. Some timing-dependent behavior might still be deemed
+ * acceptable in certain cases. But it must never result in both send/receive
+ * returning EAGAIN at the same time at any point. It must also absolutely be
+ * avoided that the current state is "unstable" and can "flip-flop" between
+ * the send/receive APIs allowing progress. For example, it's not allowed that
+ * the codec randomly decides that it actually wants to consume a packet now
+ * instead of returning a frame, after it just returned EAGAIN on an
+ * avcodec_send_packet() call.
+ * @}
*/
/**
/* video codecs */
AV_CODEC_ID_MPEG1VIDEO,
AV_CODEC_ID_MPEG2VIDEO, ///< preferred ID for MPEG-1/2 video decoding
-#if FF_API_XVMC
- AV_CODEC_ID_MPEG2VIDEO_XVMC,
-#endif /* FF_API_XVMC */
AV_CODEC_ID_H261,
AV_CODEC_ID_H263,
AV_CODEC_ID_RV10,
AV_CODEC_ID_DXV,
AV_CODEC_ID_SCREENPRESSO,
AV_CODEC_ID_RSCC,
+ AV_CODEC_ID_MAGICYUV,
+ AV_CODEC_ID_TRUEMOTION2RT,
+ AV_CODEC_ID_AV1,
+ AV_CODEC_ID_PIXLET,
+ AV_CODEC_ID_CFHD,
/* various PCM "codecs" */
AV_CODEC_ID_FIRST_AUDIO = 0x10000, ///< A dummy id pointing at the start of audio codecs
AV_CODEC_ID_MLP,
AV_CODEC_ID_GSM_MS, /* as found in WAV */
AV_CODEC_ID_ATRAC3,
-#if FF_API_VOXWARE
- AV_CODEC_ID_VOXWARE,
-#endif
AV_CODEC_ID_APE,
AV_CODEC_ID_NELLYMOSER,
AV_CODEC_ID_MUSEPACK8,
* Codec properties, a combination of AV_CODEC_PROP_* flags.
*/
int props;
+ /**
+ * If non-NULL, an array of profiles recognized for this codec.
+ * Terminated with FF_PROFILE_UNKNOWN.
+ */
+ const struct AVProfile *profiles;
} AVCodecDescriptor;
/**
*/
#define AV_INPUT_BUFFER_MIN_SIZE 16384
-#if FF_API_WITHOUT_PREFIX
-/**
- * @deprecated use AV_INPUT_BUFFER_PADDING_SIZE instead
- */
-#define FF_INPUT_BUFFER_PADDING_SIZE 8
-
-/**
- * @deprecated use AV_INPUT_BUFFER_MIN_SIZE instead
- */
-#define FF_MIN_BUFFER_SIZE 16384
-#endif /* FF_API_WITHOUT_PREFIX */
-
-/**
- * @ingroup lavc_encoding
- * motion estimation type.
- * @deprecated use codec private option instead
- */
-#if FF_API_MOTION_EST
-enum Motion_Est_ID {
- ME_ZERO = 1, ///< no search, that is use 0,0 vector whenever one is needed
- ME_FULL,
- ME_LOG,
- ME_PHODS,
- ME_EPZS, ///< enhanced predictive zonal search
- ME_X1, ///< reserved for experiments
- ME_HEX, ///< hexagon based search
- ME_UMH, ///< uneven multi-hexagon search
- ME_TESA, ///< transformed exhaustive search algorithm
-};
-#endif
-
/**
* @ingroup lavc_decoding
*/
float quality_factor;
} RcOverride;
-#if FF_API_MAX_BFRAMES
-/**
- * @deprecated there is no libavcodec-wide limit on the number of B-frames
- */
-#define FF_MAX_B_FRAMES 16
-#endif
-
/* encoding support
These flags can be passed in AVCodecContext.flags before initialization.
Note: Not everything is supported yet.
* Use only bitexact stuff (except (I)DCT).
*/
#define AV_CODEC_FLAG_BITEXACT (1 << 23)
-/* Fx : Flag for h263+ extra options */
+/* Fx : Flag for H.263+ extra options */
/**
* H.263 advanced intra coding / MPEG-4 AC prediction
*/
* are connected to a parser to split what they return into proper frames.
* This flag is reserved to the very rare category of codecs which have a
* bitstream that cannot be split into frames without timeconsuming
- * operations like full decoding. Demuxers carring such bitstreams thus
+ * operations like full decoding. Demuxers carrying such bitstreams thus
* may return multiple frames in a packet. This has many disadvantages like
* prohibiting stream copy in many cases thus it should only be considered
* as a last resort.
*/
#define AV_CODEC_CAP_VARIABLE_FRAME_SIZE (1 << 16)
-#if FF_API_WITHOUT_PREFIX
-/**
- * Allow decoders to produce frames with data planes that are not aligned
- * to CPU requirements (e.g. due to cropping).
- */
-#define CODEC_FLAG_UNALIGNED 0x0001
-#define CODEC_FLAG_QSCALE 0x0002 ///< Use fixed qscale.
-#define CODEC_FLAG_4MV 0x0004 ///< 4 MV per MB allowed / advanced prediction for H.263.
-#define CODEC_FLAG_OUTPUT_CORRUPT 0x0008 ///< Output even those frames that might be corrupted
-#define CODEC_FLAG_QPEL 0x0010 ///< Use qpel MC.
-#if FF_API_GMC
-/**
- * @deprecated use the "gmc" private option of the libxvid encoder
- */
-#define CODEC_FLAG_GMC 0x0020 ///< Use GMC.
-#endif
-#if FF_API_MV0
-/**
- * @deprecated use the flag "mv0" in the "mpv_flags" private option of the
- * mpegvideo encoders
- */
-#define CODEC_FLAG_MV0 0x0040
-#endif
-#if FF_API_INPUT_PRESERVED
-/**
- * @deprecated passing reference-counted frames to the encoders replaces this
- * flag
- */
-#define CODEC_FLAG_INPUT_PRESERVED 0x0100
-#endif
-#define CODEC_FLAG_PASS1 0x0200 ///< Use internal 2pass ratecontrol in first pass mode.
-#define CODEC_FLAG_PASS2 0x0400 ///< Use internal 2pass ratecontrol in second pass mode.
-#define CODEC_FLAG_GRAY 0x2000 ///< Only decode/encode grayscale.
-#if FF_API_EMU_EDGE
-/**
- * @deprecated edges are not used/required anymore. I.e. this flag is now always
- * set.
- */
-#define CODEC_FLAG_EMU_EDGE 0x4000
-#endif
-#define CODEC_FLAG_PSNR 0x8000 ///< error[?] variables will be set during encoding.
-#define CODEC_FLAG_TRUNCATED 0x00010000 /** Input bitstream might be truncated at a random
- location instead of only at frame boundaries. */
-#if FF_API_NORMALIZE_AQP
-/**
- * @deprecated use the flag "naq" in the "mpv_flags" private option of the
- * mpegvideo encoders
- */
-#define CODEC_FLAG_NORMALIZE_AQP 0x00020000
-#endif
-#define CODEC_FLAG_INTERLACED_DCT 0x00040000 ///< Use interlaced DCT.
-#define CODEC_FLAG_LOW_DELAY 0x00080000 ///< Force low delay.
-#define CODEC_FLAG_GLOBAL_HEADER 0x00400000 ///< Place global headers in extradata instead of every keyframe.
-#define CODEC_FLAG_BITEXACT 0x00800000 ///< Use only bitexact stuff (except (I)DCT).
-/* Fx : Flag for h263+ extra options */
-#define CODEC_FLAG_AC_PRED 0x01000000 ///< H.263 advanced intra coding / MPEG-4 AC prediction
-#define CODEC_FLAG_LOOP_FILTER 0x00000800 ///< loop filter
-#define CODEC_FLAG_INTERLACED_ME 0x20000000 ///< interlaced motion estimation
-#define CODEC_FLAG_CLOSED_GOP 0x80000000
-#define CODEC_FLAG2_FAST 0x00000001 ///< Allow non spec compliant speedup tricks.
-#define CODEC_FLAG2_NO_OUTPUT 0x00000004 ///< Skip bitstream encoding.
-#define CODEC_FLAG2_LOCAL_HEADER 0x00000008 ///< Place global headers at every keyframe instead of in extradata.
-#define CODEC_FLAG2_IGNORE_CROP 0x00010000 ///< Discard cropping information from SPS.
-
-#define CODEC_FLAG2_CHUNKS 0x00008000 ///< Input bitstream might be truncated at a packet boundaries instead of only at frame boundaries.
-
-/* Unsupported options :
- * Syntax Arithmetic coding (SAC)
- * Reference Picture Selection
- * Independent Segment Decoding */
-/* /Fx */
-/* codec capabilities */
-
-#define CODEC_CAP_DRAW_HORIZ_BAND 0x0001 ///< Decoder can use draw_horiz_band callback.
-/**
- * Codec uses get_buffer() for allocating buffers and supports custom allocators.
- * If not set, it might not use get_buffer() at all or use operations that
- * assume the buffer was allocated by avcodec_default_get_buffer.
- */
-#define CODEC_CAP_DR1 0x0002
-#define CODEC_CAP_TRUNCATED 0x0008
-#if FF_API_XVMC
-/* Codec can export data for HW decoding (XvMC). */
-#define CODEC_CAP_HWACCEL 0x0010
-#endif /* FF_API_XVMC */
-/**
- * Encoder or decoder requires flushing with NULL input at the end in order to
- * give the complete and correct output.
- *
- * NOTE: If this flag is not set, the codec is guaranteed to never be fed with
- * with NULL data. The user can still send NULL data to the public encode
- * or decode function, but libavcodec will not pass it along to the codec
- * unless this flag is set.
- *
- * Decoders:
- * The decoder has a non-zero delay and needs to be fed with avpkt->data=NULL,
- * avpkt->size=0 at the end to get the delayed data until the decoder no longer
- * returns frames.
- *
- * Encoders:
- * The encoder needs to be fed with NULL data at the end of encoding until the
- * encoder no longer returns data.
- *
- * NOTE: For encoders implementing the AVCodec.encode2() function, setting this
- * flag also means that the encoder must set the pts and duration for
- * each output packet. If this flag is not set, the pts and duration will
- * be determined by libavcodec from the input frame.
- */
-#define CODEC_CAP_DELAY 0x0020
-/**
- * Codec can be fed a final frame with a smaller size.
- * This can be used to prevent truncation of the last audio samples.
- */
-#define CODEC_CAP_SMALL_LAST_FRAME 0x0040
-#if FF_API_CAP_VDPAU
-/**
- * Codec can export data for HW decoding (VDPAU).
- */
-#define CODEC_CAP_HWACCEL_VDPAU 0x0080
-#endif
-/**
- * Codec can output multiple frames per AVPacket
- * Normally demuxers return one frame at a time, demuxers which do not do
- * are connected to a parser to split what they return into proper frames.
- * This flag is reserved to the very rare category of codecs which have a
- * bitstream that cannot be split into frames without timeconsuming
- * operations like full decoding. Demuxers carring such bitstreams thus
- * may return multiple frames in a packet. This has many disadvantages like
- * prohibiting stream copy in many cases thus it should only be considered
- * as a last resort.
- */
-#define CODEC_CAP_SUBFRAMES 0x0100
-/**
- * Codec is experimental and is thus avoided in favor of non experimental
- * encoders
- */
-#define CODEC_CAP_EXPERIMENTAL 0x0200
-/**
- * Codec should fill in channel configuration and samplerate instead of container
- */
-#define CODEC_CAP_CHANNEL_CONF 0x0400
-#if FF_API_NEG_LINESIZES
-/**
- * @deprecated no codecs use this capability
- */
-#define CODEC_CAP_NEG_LINESIZES 0x0800
-#endif
-/**
- * Codec supports frame-level multithreading.
- */
-#define CODEC_CAP_FRAME_THREADS 0x1000
-/**
- * Codec supports slice-based (or partition-based) multithreading.
- */
-#define CODEC_CAP_SLICE_THREADS 0x2000
-/**
- * Codec supports changed parameters at any point.
- */
-#define CODEC_CAP_PARAM_CHANGE 0x4000
-/**
- * Codec supports avctx->thread_count == 0 (auto).
- */
-#define CODEC_CAP_AUTO_THREADS 0x8000
-/**
- * Audio encoder supports receiving a different number of samples in each call.
- */
-#define CODEC_CAP_VARIABLE_FRAME_SIZE 0x10000
-#endif /* FF_API_WITHOUT_PREFIX */
-
-#if FF_API_MB_TYPE
-//The following defines may change, don't expect compatibility if you use them.
-#define MB_TYPE_INTRA4x4 0x0001
-#define MB_TYPE_INTRA16x16 0x0002 //FIXME H.264-specific
-#define MB_TYPE_INTRA_PCM 0x0004 //FIXME H.264-specific
-#define MB_TYPE_16x16 0x0008
-#define MB_TYPE_16x8 0x0010
-#define MB_TYPE_8x16 0x0020
-#define MB_TYPE_8x8 0x0040
-#define MB_TYPE_INTERLACED 0x0080
-#define MB_TYPE_DIRECT2 0x0100 //FIXME
-#define MB_TYPE_ACPRED 0x0200
-#define MB_TYPE_GMC 0x0400
-#define MB_TYPE_SKIP 0x0800
-#define MB_TYPE_P0L0 0x1000
-#define MB_TYPE_P1L0 0x2000
-#define MB_TYPE_P0L1 0x4000
-#define MB_TYPE_P1L1 0x8000
-#define MB_TYPE_L0 (MB_TYPE_P0L0 | MB_TYPE_P1L0)
-#define MB_TYPE_L1 (MB_TYPE_P0L1 | MB_TYPE_P1L1)
-#define MB_TYPE_L0L1 (MB_TYPE_L0 | MB_TYPE_L1)
-#define MB_TYPE_QUANT 0x00010000
-#define MB_TYPE_CBP 0x00020000
-//Note bits 24-31 are reserved for codec specific use (h264 ref0, mpeg1 0mv, ...)
-#endif
-
/**
* Pan Scan area.
* This specifies the area which should be displayed.
uint64_t vbv_delay;
} AVCPBProperties;
-#if FF_API_QSCALE_TYPE
-#define FF_QSCALE_TYPE_MPEG1 0
-#define FF_QSCALE_TYPE_MPEG2 1
-#define FF_QSCALE_TYPE_H264 2
-#define FF_QSCALE_TYPE_VP56 3
-#endif
-
/**
* The decoder will keep a reference to the frame and may reuse it later.
*/
* @{
*/
enum AVPacketSideDataType {
+ /**
+ * An AV_PKT_DATA_PALETTE side data packet contains exactly AVPALETTE_SIZE
+ * bytes worth of palette. This side data signals that a new palette is
+ * present.
+ */
AV_PKT_DATA_PALETTE,
+
+ /**
+ * The AV_PKT_DATA_NEW_EXTRADATA is used to notify the codec or the format
+ * that the extradata buffer was changed and the receiving side should
+ * act upon it appropriately. The new extradata is embedded in the side
+ * data buffer and should be immediately used for processing the current
+ * frame or packet.
+ */
AV_PKT_DATA_NEW_EXTRADATA,
/**
* This side data corresponds to the AVCPBProperties struct.
*/
AV_PKT_DATA_CPB_PROPERTIES,
+
+ /**
+ * This side data should be associated with a video stream and corresponds
+ * to the AVSphericalMapping structure.
+ */
+ AV_PKT_DATA_SPHERICAL,
};
typedef struct AVPacketSideData {
enum AVMediaType codec_type; /* see AVMEDIA_TYPE_xxx */
const struct AVCodec *codec;
-#if FF_API_CODEC_NAME
- /**
- * @deprecated this field is not used for anything in libavcodec
- */
- attribute_deprecated
- char codec_name[32];
-#endif
enum AVCodecID codec_id; /* see AV_CODEC_ID_xxx */
/**
*/
unsigned int codec_tag;
-#if FF_API_STREAM_CODEC_TAG
- /**
- * @deprecated this field is unused
- */
- attribute_deprecated
- unsigned int stream_codec_tag;
-#endif
-
void *priv_data;
/**
/**
* some codecs need / can use extradata like Huffman tables.
- * mjpeg: Huffman tables
+ * MJPEG: Huffman tables
* rv10: additional flags
- * mpeg4: global headers (they can be in the bitstream or here)
+ * MPEG-4: global headers (they can be in the bitstream or here)
* The allocated memory should be AV_INPUT_BUFFER_PADDING_SIZE bytes larger
- * than extradata_size to avoid prolems if it is read with the bitstream reader.
+ * than extradata_size to avoid problems if it is read with the bitstream reader.
* The bytewise contents of extradata must not depend on the architecture or CPU endianness.
* - encoding: Set/allocated/freed by libavcodec.
* - decoding: Set/allocated/freed by user.
* picture width / height.
*
* @note Those fields may not match the values of the last
- * AVFrame outputted by avcodec_decode_video2 due frame
+ * AVFrame output by avcodec_decode_video2 due frame
* reordering.
*
* - encoding: MUST be set by user.
* the decoded frame is cropped before being output.
*
* @note Those field may not match the value of the last
- * AVFrame outputted by avcodec_decode_video2 due frame
+ * AVFrame output by avcodec_receive_frame() due frame
* reordering.
*
* - encoding: unused
*/
int coded_width, coded_height;
-#if FF_API_ASPECT_EXTENDED
-#define FF_ASPECT_EXTENDED 15
-#endif
-
/**
* the number of pictures in a group of pictures, or 0 for intra_only
* - encoding: Set by user.
/**
* Pixel format, see AV_PIX_FMT_xxx.
* May be set by the demuxer if known from headers.
- * May be overriden by the decoder if it knows better.
+ * May be overridden by the decoder if it knows better.
*
* @note This field may not match the value of the last
- * AVFrame outputted by avcodec_decode_video2 due frame
+ * AVFrame output by avcodec_receive_frame() due frame
* reordering.
*
* - encoding: Set by user.
*/
enum AVPixelFormat pix_fmt;
-#if FF_API_MOTION_EST
- /**
- * This option does nothing
- * @deprecated use codec private options instead
- */
- attribute_deprecated int me_method;
-#endif
-
/**
* If non NULL, 'draw_horiz_band' is called by the libavcodec
* decoder to draw a horizontal band. It improves cache usage. Not
*/
float b_quant_factor;
-#if FF_API_RC_STRATEGY
- /** @deprecated use codec private option instead */
- attribute_deprecated int rc_strategy;
-#define FF_RC_STRATEGY_XVID 1
-#endif
-
+#if FF_API_PRIVATE_OPT
+ /** @deprecated use encoder private options instead */
+ attribute_deprecated
int b_frame_strategy;
+#endif
/**
* qscale offset between IP and B-frames
*/
int has_b_frames;
- /**
- * 0-> h263 quant 1-> mpeg quant
- * - encoding: Set by user.
- * - decoding: unused
- */
+#if FF_API_PRIVATE_OPT
+ /** @deprecated use encoder private options instead */
+ attribute_deprecated
int mpeg_quant;
+#endif
/**
- * qscale factor between P and I-frames
- * If > 0 then the last p frame quantizer will be used (q= lastp_q*factor+offset).
+ * qscale factor between P- and I-frames
+ * If > 0 then the last P-frame quantizer will be used (q = lastp_q * factor + offset).
* If < 0 then normal ratecontrol will be done (q= -normal_q*factor+offset).
* - encoding: Set by user.
* - decoding: unused
* - decoding: Set by user (or 0).
*/
int slice_count;
- /**
- * prediction method (needed for huffyuv)
- * - encoding: Set by user.
- * - decoding: unused
- */
+
+#if FF_API_PRIVATE_OPT
+ /** @deprecated use encoder private options instead */
+ attribute_deprecated
int prediction_method;
#define FF_PRED_LEFT 0
#define FF_PRED_PLANE 1
#define FF_PRED_MEDIAN 2
+#endif
/**
* slice offsets in the frame in bytes
*/
int last_predictor_count;
- /**
- * prepass for motion estimation
- * - encoding: Set by user.
- * - decoding: unused
- */
+#if FF_API_PRIVATE_OPT
+ /** @deprecated use encoder private options instead */
+ attribute_deprecated
int pre_me;
+#endif
/**
* motion estimation prepass comparison function
*/
int me_subpel_quality;
-#if FF_API_AFD
- /**
- * DTG active format information (additional aspect ratio
- * information only used in DVB MPEG-2 transport streams)
- * 0 if not set.
- *
- * - encoding: unused
- * - decoding: Set by decoder.
- * @deprecated Deprecated in favor of AVSideData
- */
- attribute_deprecated int dtg_active_format;
-#define FF_DTG_AFD_SAME 8
-#define FF_DTG_AFD_4_3 9
-#define FF_DTG_AFD_16_9 10
-#define FF_DTG_AFD_14_9 11
-#define FF_DTG_AFD_4_3_SP_14_9 13
-#define FF_DTG_AFD_16_9_SP_14_9 14
-#define FF_DTG_AFD_SP_4_3 15
-#endif /* FF_API_AFD */
-
/**
* maximum motion estimation search range in subpel units
* If 0 then no limit.
*/
int me_range;
-#if FF_API_QUANT_BIAS
- /**
- * @deprecated use encoder private option instead
- */
- attribute_deprecated int intra_quant_bias;
-#define FF_DEFAULT_QUANT_BIAS 999999
-
- /**
- * @deprecated use encoder private option instead
- */
- attribute_deprecated int inter_quant_bias;
-#endif
-
/**
* slice flags
* - encoding: unused
*/
int slice_flags;
#define SLICE_FLAG_CODED_ORDER 0x0001 ///< draw_horiz_band() is called in coded order instead of display
-#define SLICE_FLAG_ALLOW_FIELD 0x0002 ///< allow draw_horiz_band() with field slices (MPEG2 field pics)
+#define SLICE_FLAG_ALLOW_FIELD 0x0002 ///< allow draw_horiz_band() with field slices (MPEG-2 field pics)
#define SLICE_FLAG_ALLOW_PLANE 0x0004 ///< allow draw_horiz_band() with 1 component at a time (SVQ1)
-#if FF_API_XVMC
- /**
- * XVideo Motion Acceleration
- * - encoding: forbidden
- * - decoding: set by decoder
- * @deprecated XvMC support is slated for removal.
- */
- attribute_deprecated int xvmc_acceleration;
-#endif /* FF_API_XVMC */
-
/**
* macroblock decision mode
* - encoding: Set by user.
*/
uint16_t *inter_matrix;
- /**
- * scene change detection threshold
- * 0 is default, larger means fewer detected scene changes.
- * - encoding: Set by user.
- * - decoding: unused
- */
- int scenechange_threshold;
-
- /**
- * noise reduction strength
- * - encoding: Set by user.
- * - decoding: unused
- */
- int noise_reduction;
-
-#if FF_API_MPV_OPT
- /**
- * @deprecated this field is unused
- */
+#if FF_API_PRIVATE_OPT
+ /** @deprecated use encoder private options instead */
attribute_deprecated
- int me_threshold;
+ int scenechange_threshold;
- /**
- * @deprecated this field is unused
- */
+ /** @deprecated use encoder private options instead */
attribute_deprecated
- int mb_threshold;
+ int noise_reduction;
#endif
/**
*/
int skip_bottom;
-#if FF_API_MPV_OPT
- /**
- * @deprecated use encoder private options instead
- */
- attribute_deprecated
- float border_masking;
-#endif
-
/**
- * minimum MB lagrange multipler
+ * minimum MB Lagrange multiplier
* - encoding: Set by user.
* - decoding: unused
*/
int mb_lmin;
/**
- * maximum MB lagrange multipler
+ * maximum MB Lagrange multiplier
* - encoding: Set by user.
* - decoding: unused
*/
int mb_lmax;
+#if FF_API_PRIVATE_OPT
/**
- *
- * - encoding: Set by user.
- * - decoding: unused
+ * @deprecated use encoder private options instead
*/
+ attribute_deprecated
int me_penalty_compensation;
+#endif
/**
- *
* - encoding: Set by user.
* - decoding: unused
*/
int bidir_refine;
- /**
- *
- * - encoding: Set by user.
- * - decoding: unused
- */
+#if FF_API_PRIVATE_OPT
+ /** @deprecated use encoder private options instead */
+ attribute_deprecated
int brd_scale;
+#endif
/**
* minimum GOP size
*/
int refs;
- /**
- * chroma qp offset from luma
- * - encoding: Set by user.
- * - decoding: unused
- */
+#if FF_API_PRIVATE_OPT
+ /** @deprecated use encoder private options instead */
+ attribute_deprecated
int chromaoffset;
-
-#if FF_API_UNUSED_MEMBERS
- /**
- * Multiplied by qscale for each frame and added to scene_change_score.
- * - encoding: Set by user.
- * - decoding: unused
- */
- attribute_deprecated int scenechange_factor;
#endif
/**
- *
* Note: Value depends upon the compare function used for fullpel ME.
* - encoding: Set by user.
* - decoding: unused
*/
int mv0_threshold;
- /**
- * Adjust sensitivity of b_frame_strategy 1.
- * - encoding: Set by user.
- * - decoding: unused
- */
+#if FF_API_PRIVATE_OPT
+ /** @deprecated use encoder private options instead */
+ attribute_deprecated
int b_sensitivity;
+#endif
/**
* Chromaticity coordinates of the source primaries.
* to all data planes. data[] must hold as many pointers as it can.
* extended_data must be allocated with av_malloc() and will be freed in
* av_frame_unref().
- * * otherwise exended_data must point to data
+ * * otherwise extended_data must point to data
* - buf[] must contain one or more pointers to AVBufferRef structures. Each of
* the frame's data and extended_data pointers must be contained in these. That
* is, one AVBufferRef for each allocated chunk of memory, not necessarily one
* Otherwise, the decoded frames must not be freed by the caller and are
* only valid until the next decode call.
*
+ * This is always automatically enabled if avcodec_receive_frame() is used.
+ *
* - encoding: unused
* - decoding: set by the caller before avcodec_open2().
*/
- int refcounted_frames;
+ attribute_deprecated int refcounted_frames;
/* - encoding parameters */
float qcompress; ///< amount of qscale change between easy & hard scenes (0.0-1.0)
*/
int max_qdiff;
-#if FF_API_MPV_OPT
- /**
- * @deprecated use encoder private options instead
- */
- attribute_deprecated
- float rc_qsquish;
-
- attribute_deprecated
- float rc_qmod_amp;
- attribute_deprecated
- int rc_qmod_freq;
-#endif
-
/**
* decoder bitstream buffer size
* - encoding: Set by user.
int rc_override_count;
RcOverride *rc_override;
-#if FF_API_MPV_OPT
- /**
- * @deprecated use encoder private options instead
- */
- attribute_deprecated
- const char *rc_eq;
-#endif
-
/**
* maximum bitrate
* - encoding: Set by user.
*/
int rc_min_rate;
-#if FF_API_MPV_OPT
- /**
- * @deprecated use encoder private options instead
- */
- attribute_deprecated
- float rc_buffer_aggressivity;
-
- attribute_deprecated
- float rc_initial_cplx;
-#endif
-
/**
* Ratecontrol attempt to use, at maximum, <value> of what can be used without an underflow.
* - encoding: Set by user.
#define FF_CODER_TYPE_AC 1
#define FF_CODER_TYPE_RAW 2
#define FF_CODER_TYPE_RLE 3
-#if FF_API_UNUSED_MEMBERS
-#define FF_CODER_TYPE_DEFLATE 4
-#endif /* FF_API_UNUSED_MEMBERS */
/**
* @deprecated use encoder private options instead
*/
int coder_type;
#endif /* FF_API_CODER_TYPE */
- /**
- * context model
- * - encoding: Set by user.
- * - decoding: unused
- */
- int context_model;
-
-#if FF_API_MPV_OPT
- /**
- * @deprecated use encoder private options instead
- */
- attribute_deprecated
- int lmin;
-
- /**
- * @deprecated use encoder private options instead
- */
+#if FF_API_PRIVATE_OPT
+ /** @deprecated use encoder private options instead */
attribute_deprecated
- int lmax;
+ int context_model;
#endif
- /**
- * frame skip threshold
- * - encoding: Set by user.
- * - decoding: unused
- */
+#if FF_API_PRIVATE_OPT
+ /** @deprecated use encoder private options instead */
+ attribute_deprecated
int frame_skip_threshold;
- /**
- * frame skip factor
- * - encoding: Set by user.
- * - decoding: unused
- */
+ /** @deprecated use encoder private options instead */
+ attribute_deprecated
int frame_skip_factor;
- /**
- * frame skip exponent
- * - encoding: Set by user.
- * - decoding: unused
- */
+ /** @deprecated use encoder private options instead */
+ attribute_deprecated
int frame_skip_exp;
- /**
- * frame skip comparison function
- * - encoding: Set by user.
- * - decoding: unused
- */
+ /** @deprecated use encoder private options instead */
+ attribute_deprecated
int frame_skip_cmp;
+#endif /* FF_API_PRIVATE_OPT */
/**
* trellis RD quantization
*/
int trellis;
- /**
- * - encoding: Set by user.
- * - decoding: unused
- */
+#if FF_API_PRIVATE_OPT
+ /** @deprecated use encoder private options instead */
+ attribute_deprecated
int min_prediction_order;
- /**
- * - encoding: Set by user.
- * - decoding: unused
- */
+ /** @deprecated use encoder private options instead */
+ attribute_deprecated
int max_prediction_order;
- /**
- * GOP timecode frame start number, in non drop frame format
- * - encoding: Set by user.
- * - decoding: unused
- */
+ /** @deprecated use encoder private options instead */
+ attribute_deprecated
int64_t timecode_frame_start;
+#endif
#if FF_API_RTP_CALLBACK
/**
void (*rtp_callback)(struct AVCodecContext *avctx, void *data, int size, int mb_nb);
#endif
+#if FF_API_PRIVATE_OPT
+ /** @deprecated use encoder private options instead */
+ attribute_deprecated
int rtp_payload_size; /* The size of the RTP payload: the coder will */
/* do its best to deliver a chunk with size */
/* below rtp_payload_size, the chunk will start */
/* with a start code on some codecs like H.263. */
/* This doesn't take account of any particular */
/* headers inside the transmitted RTP payload. */
+#endif
+#if FF_API_STAT_BITS
/* statistics, used for 2-pass encoding */
+ attribute_deprecated
int mv_bits;
+ attribute_deprecated
int header_bits;
+ attribute_deprecated
int i_tex_bits;
+ attribute_deprecated
int p_tex_bits;
+ attribute_deprecated
int i_count;
+ attribute_deprecated
int p_count;
+ attribute_deprecated
int skip_count;
+ attribute_deprecated
int misc_bits;
- /**
- * number of bits used for the previously encoded frame
- * - encoding: Set by libavcodec.
- * - decoding: unused
- */
+ /** @deprecated this field is unused */
+ attribute_deprecated
int frame_bits;
+#endif
/**
* pass1 encoding statistics output buffer
*/
int workaround_bugs;
#define FF_BUG_AUTODETECT 1 ///< autodetection
-#if FF_API_OLD_MSMPEG4
-#define FF_BUG_OLD_MSMPEG4 2
-#endif
#define FF_BUG_XVID_ILACE 4
#define FF_BUG_UMP4 8
#define FF_BUG_NO_PADDING 16
#define FF_BUG_AMV 32
-#if FF_API_AC_VLC
-#define FF_BUG_AC_VLC 0 ///< Will be removed, libavcodec can now handle these non-compliant files by default.
-#endif
#define FF_BUG_QPEL_CHROMA 64
#define FF_BUG_STD_QPEL 128
#define FF_BUG_QPEL_CHROMA2 256
#define FF_BUG_TRUNCATED 16384
/**
- * strictly follow the standard (MPEG4, ...).
+ * strictly follow the standard (MPEG-4, ...).
* - encoding: Set by user.
* - decoding: Set by user.
* Setting this to STRICT or higher means the encoder and decoder will
#define FF_DEBUG_BITSTREAM 4
#define FF_DEBUG_MB_TYPE 8
#define FF_DEBUG_QP 16
-#if FF_API_DEBUG_MV
-/**
- * @deprecated this option does nothing
- */
-#define FF_DEBUG_MV 32
-#endif
#define FF_DEBUG_DCT_COEFF 0x00000040
#define FF_DEBUG_SKIP 0x00000080
#define FF_DEBUG_STARTCODE 0x00000100
-#if FF_API_UNUSED_MEMBERS
-#define FF_DEBUG_PTS 0x00000200
-#endif /* FF_API_UNUSED_MEMBERS */
#define FF_DEBUG_ER 0x00000400
#define FF_DEBUG_MMCO 0x00000800
#define FF_DEBUG_BUGS 0x00001000
-#if FF_API_DEBUG_MV
-#define FF_DEBUG_VIS_QP 0x00002000
-#define FF_DEBUG_VIS_MB_TYPE 0x00004000
-#endif
#define FF_DEBUG_BUFFERS 0x00008000
#define FF_DEBUG_THREADS 0x00010000
-#if FF_API_DEBUG_MV
- /**
- * @deprecated this option does not have any effect
- */
- attribute_deprecated
- int debug_mv;
-#define FF_DEBUG_VIS_MV_P_FOR 0x00000001 //visualize forward predicted MVs of P frames
-#define FF_DEBUG_VIS_MV_B_FOR 0x00000002 //visualize forward predicted MVs of B frames
-#define FF_DEBUG_VIS_MV_B_BACK 0x00000004 //visualize backward predicted MVs of B frames
-#endif
-
/**
* Error recognition; may misdetect some more or less valid parts as errors.
* - encoding: unused
#define AV_EF_EXPLODE (1<<3)
/**
- * opaque 64bit number (generally a PTS) that will be reordered and
+ * opaque 64-bit number (generally a PTS) that will be reordered and
* output in AVFrame.reordered_opaque
* - encoding: unused
* - decoding: Set by user.
#define FF_IDCT_SIMPLEMMX 3
#define FF_IDCT_ARM 7
#define FF_IDCT_ALTIVEC 8
-#if FF_API_ARCH_SH4
-#define FF_IDCT_SH4 9
-#endif
#define FF_IDCT_SIMPLEARM 10
-#if FF_API_UNUSED_MEMBERS
-#define FF_IDCT_IPP 13
-#endif /* FF_API_UNUSED_MEMBERS */
#define FF_IDCT_XVID 14
-#if FF_API_IDCT_XVIDMMX
-#define FF_IDCT_XVIDMMX 14
-#endif /* FF_API_IDCT_XVIDMMX */
#define FF_IDCT_SIMPLEARMV5TE 16
#define FF_IDCT_SIMPLEARMV6 17
-#if FF_API_ARCH_SPARC
-#define FF_IDCT_SIMPLEVIS 18
-#endif
#define FF_IDCT_FAAN 20
#define FF_IDCT_SIMPLENEON 22
-#if FF_API_ARCH_ALPHA
-#define FF_IDCT_SIMPLEALPHA 23
-#endif
/**
* bits per sample/pixel from the demuxer (needed for huffyuv).
*/
int bits_per_raw_sample;
-#if FF_API_LOWRES
- /**
- * low resolution decoding, 1-> 1/2 size, 2->1/4 size
- * - encoding: unused
- * - decoding: Set by user.
- *
- * @deprecated use decoder private options instead
- */
- attribute_deprecated int lowres;
-#endif
-
#if FF_API_CODED_FRAME
/**
* the picture in the bitstream
int (*execute2)(struct AVCodecContext *c, int (*func)(struct AVCodecContext *c2, void *arg, int jobnr, int threadnr), void *arg2, int *ret, int count);
/**
- * noise vs. sse weight for the nsse comparsion function
+ * noise vs. sse weight for the nsse comparison function
* - encoding: Set by user.
* - decoding: unused
*/
#define FF_PROFILE_H264_HIGH 100
#define FF_PROFILE_H264_HIGH_10 110
#define FF_PROFILE_H264_HIGH_10_INTRA (110|FF_PROFILE_H264_INTRA)
+#define FF_PROFILE_H264_MULTIVIEW_HIGH 118
#define FF_PROFILE_H264_HIGH_422 122
#define FF_PROFILE_H264_HIGH_422_INTRA (122|FF_PROFILE_H264_INTRA)
+#define FF_PROFILE_H264_STEREO_HIGH 128
#define FF_PROFILE_H264_HIGH_444 144
#define FF_PROFILE_H264_HIGH_444_PREDICTIVE 244
#define FF_PROFILE_H264_HIGH_444_INTRA (244|FF_PROFILE_H264_INTRA)
#define FF_PROFILE_MPEG4_SIMPLE_STUDIO 14
#define FF_PROFILE_MPEG4_ADVANCED_SIMPLE 15
-#define FF_PROFILE_JPEG2000_CSTREAM_RESTRICTION_0 0
-#define FF_PROFILE_JPEG2000_CSTREAM_RESTRICTION_1 1
-#define FF_PROFILE_JPEG2000_CSTREAM_NO_RESTRICTION 2
+#define FF_PROFILE_JPEG2000_CSTREAM_RESTRICTION_0 1
+#define FF_PROFILE_JPEG2000_CSTREAM_RESTRICTION_1 2
+#define FF_PROFILE_JPEG2000_CSTREAM_NO_RESTRICTION 32768
#define FF_PROFILE_JPEG2000_DCINEMA_2K 3
#define FF_PROFILE_JPEG2000_DCINEMA_4K 4
#define FF_PROFILE_HEVC_MAIN 1
#define FF_PROFILE_HEVC_MAIN_10 2
#define FF_PROFILE_HEVC_MAIN_STILL_PICTURE 3
+#define FF_PROFILE_HEVC_REXT 4
/**
* level
#define FF_LEVEL_UNKNOWN -99
/**
- *
* - encoding: unused
* - decoding: Set by user.
*/
enum AVDiscard skip_loop_filter;
/**
- *
* - encoding: unused
* - decoding: Set by user.
*/
enum AVDiscard skip_idct;
/**
- *
* - encoding: unused
* - decoding: Set by user.
*/
uint8_t *subtitle_header;
int subtitle_header_size;
-#if FF_API_ERROR_RATE
- /**
- * @deprecated use the 'error_rate' private AVOption of the mpegvideo
- * encoders
- */
- attribute_deprecated
- int error_rate;
-#endif
-
#if FF_API_VBV_DELAY
/**
* VBV delay coded in the last frame (in periods of a 27 MHz clock).
* - decoding: For codecs that store a framerate value in the compressed
* bitstream, the decoder may export it here. { 0, 1} when
* unknown.
- * - encoding: unused
+ * - encoding: May be used to signal the framerate of CFR content to an
+ * encoder.
*/
AVRational framerate;
AVPacketSideData *coded_side_data;
int nb_coded_side_data;
+ /**
+ * A reference to the AVHWFramesContext describing the input (for encoding)
+ * or output (decoding) frames. The reference is set by the caller and
+ * afterwards owned (and freed) by libavcodec - it should never be read by
+ * the caller after being set.
+ *
+ * - decoding: This field should be set by the caller from the get_format()
+ * callback. The previous reference (if any) will always be
+ * unreffed by libavcodec before the get_format() call.
+ *
+ * If the default get_buffer2() is used with a hwaccel pixel
+ * format, then this AVHWFramesContext will be used for
+ * allocating the frame buffers.
+ *
+ * - encoding: For hardware encoders configured to use a hwaccel pixel
+ * format, this field should be set by the caller to a reference
+ * to the AVHWFramesContext describing input frames.
+ * AVHWFramesContext.format must be equal to
+ * AVCodecContext.pix_fmt.
+ *
+ * This field should be set before avcodec_open2() is called.
+ */
+ AVBufferRef *hw_frames_ctx;
+
+ /**
+ * Video decoding only. Certain video codecs support cropping, meaning that
+ * only a sub-rectangle of the decoded frame is intended for display. This
+ * option controls how cropping is handled by libavcodec.
+ *
+ * When set to 1 (the default), libavcodec will apply cropping internally.
+ * I.e. it will modify the output frame width/height fields and offset the
+ * data pointers (only by as much as possible while preserving alignment, or
+ * by the full amount if the AV_CODEC_FLAG_UNALIGNED flag is set) so that
+ * the frames output by the decoder refer only to the cropped area. The
+ * crop_* fields of the output frames will be zero.
+ *
+ * When set to 0, the width/height fields of the output frames will be set
+ * to the coded dimensions and the crop_* fields will describe the cropping
+ * rectangle. Applying the cropping is left to the caller.
+ *
+ * @warning When hardware acceleration with opaque output frames is used,
+ * libavcodec is unable to apply cropping from the top/left border.
+ *
+ * @note when this option is set to zero, the width/height fields of the
+ * AVCodecContext and output AVFrames have different meanings. The codec
+ * context fields store display dimensions (with the coded dimensions in
+ * coded_width/height), while the frame fields store the coded dimensions
+ * (with the display dimensions being determined by the crop_* fields).
+ */
+ int apply_cropping;
+
+ /**
+ * A reference to the AVHWDeviceContext describing the device which will
+ * be used by a hardware encoder/decoder. The reference is set by the
+ * caller and afterwards owned (and freed) by libavcodec.
+ *
+ * This should be used if either the codec device does not require
+ * hardware frames or any that are used are to be allocated internally by
+ * libavcodec. If the user wishes to supply any of the frames used as
+ * encoder input or decoder output then hw_frames_ctx should be used
+ * instead. When hw_frames_ctx is set in get_format() for a decoder, this
+ * field will be ignored while decoding the associated stream segment, but
+ * may again be used on a following one after another get_format() call.
+ *
+ * For both encoders and decoders this field should be set before
+ * avcodec_open2() is called and must not be written to thereafter.
+ *
+ * Note that some decoders may require this field to be set initially in
+ * order to support hw_frames_ctx at all - in that case, all frames
+ * contexts used must be created on the same device.
+ */
+ AVBufferRef *hw_device_ctx;
+
+ /**
+ * Bit set of AV_HWACCEL_FLAG_* flags, which affect hardware accelerated
+ * decoding (if active).
+ * - encoding: unused
+ * - decoding: Set by user (either before avcodec_open2(), or in the
+ * AVCodecContext.get_format callback)
+ */
+ int hwaccel_flags;
} AVCodecContext;
/**
const int *supported_samplerates; ///< array of supported audio samplerates, or NULL if unknown, array is terminated by 0
const enum AVSampleFormat *sample_fmts; ///< array of supported sample formats, or NULL if unknown, array is terminated by -1
const uint64_t *channel_layouts; ///< array of support channel layouts, or NULL if unknown. array is terminated by 0
-#if FF_API_LOWRES
- attribute_deprecated uint8_t max_lowres; ///< maximum value for lowres supported by the decoder
-#endif
const AVClass *priv_class; ///< AVClass for the private context
const AVProfile *profiles; ///< array of recognized profiles, or NULL if unknown, array is terminated by {FF_PROFILE_UNKNOWN}
int *got_packet_ptr);
int (*decode)(AVCodecContext *, void *outdata, int *outdata_size, AVPacket *avpkt);
int (*close)(AVCodecContext *);
+ /**
+ * Encode API with decoupled packet/frame dataflow. The API is the
+ * same as the avcodec_ prefixed APIs (avcodec_send_frame() etc.), except
+ * that:
+ * - never called if the codec is closed or the wrong type,
+ * - if AV_CODEC_CAP_DELAY is not set, drain frames are never sent,
+ * - only one drain frame is ever passed down,
+ */
+ int (*send_frame)(AVCodecContext *avctx, const AVFrame *frame);
+ int (*receive_packet)(AVCodecContext *avctx, AVPacket *avpkt);
+
+ /**
+ * Decode API with decoupled packet/frame dataflow. This function is called
+ * to get one output frame. It should call ff_decode_get_packet() to obtain
+ * input data.
+ */
+ int (*receive_frame)(AVCodecContext *avctx, AVFrame *frame);
/**
* Flush buffers.
* Will be called when seeking
* See FF_CODEC_CAP_* in internal.h
*/
int caps_internal;
+
+ /**
+ * Decoding only, a comma-separated list of bitstream filters to apply to
+ * packets before decoding.
+ */
+ const char *bsfs;
} AVCodec;
/**
* AVCodecInternal.hwaccel_priv_data.
*/
int priv_data_size;
+
+ /**
+ * Internal hwaccel capabilities.
+ */
+ int caps_internal;
} AVHWAccel;
/**
/**
* 0 terminated ASS/SSA compatible event line.
- * The pressentation of this is unaffected by the other values in this
+ * The presentation of this is unaffected by the other values in this
* struct.
*/
char *ass;
int64_t pts; ///< Same as packet pts, in AV_TIME_BASE
} AVSubtitle;
+/**
+ * This struct describes the properties of an encoded stream.
+ *
+ * sizeof(AVCodecParameters) is not a part of the public ABI, this struct must
+ * be allocated with avcodec_parameters_alloc() and freed with
+ * avcodec_parameters_free().
+ */
+typedef struct AVCodecParameters {
+ /**
+ * General type of the encoded data.
+ */
+ enum AVMediaType codec_type;
+ /**
+ * Specific type of the encoded data (the codec used).
+ */
+ enum AVCodecID codec_id;
+ /**
+ * Additional information about the codec (corresponds to the AVI FOURCC).
+ */
+ uint32_t codec_tag;
+
+ /**
+ * Extra binary data needed for initializing the decoder, codec-dependent.
+ *
+ * Must be allocated with av_malloc() and will be freed by
+ * avcodec_parameters_free(). The allocated size of extradata must be at
+ * least extradata_size + AV_INPUT_BUFFER_PADDING_SIZE, with the padding
+ * bytes zeroed.
+ */
+ uint8_t *extradata;
+ /**
+ * Size of the extradata content in bytes.
+ */
+ int extradata_size;
+
+ /**
+ * - video: the pixel format, the value corresponds to enum AVPixelFormat.
+ * - audio: the sample format, the value corresponds to enum AVSampleFormat.
+ */
+ int format;
+
+ /**
+ * The average bitrate of the encoded data (in bits per second).
+ */
+ int bit_rate;
+
+ int bits_per_coded_sample;
+
+ /**
+ * Codec-specific bitstream restrictions that the stream conforms to.
+ */
+ int profile;
+ int level;
+
+ /**
+ * Video only. The dimensions of the video frame in pixels.
+ */
+ int width;
+ int height;
+
+ /**
+ * Video only. The aspect ratio (width / height) which a single pixel
+ * should have when displayed.
+ *
+ * When the aspect ratio is unknown / undefined, the numerator should be
+ * set to 0 (the denominator may have any value).
+ */
+ AVRational sample_aspect_ratio;
+
+ /**
+ * Video only. The order of the fields in interlaced video.
+ */
+ enum AVFieldOrder field_order;
+
+ /**
+ * Video only. Additional colorspace characteristics.
+ */
+ enum AVColorRange color_range;
+ enum AVColorPrimaries color_primaries;
+ enum AVColorTransferCharacteristic color_trc;
+ enum AVColorSpace color_space;
+ enum AVChromaLocation chroma_location;
+
+ /**
+ * Audio only. The channel layout bitmask. May be 0 if the channel layout is
+ * unknown or unspecified, otherwise the number of bits set must be equal to
+ * the channels field.
+ */
+ uint64_t channel_layout;
+ /**
+ * Audio only. The number of audio channels.
+ */
+ int channels;
+ /**
+ * Audio only. The number of audio samples per second.
+ */
+ int sample_rate;
+ /**
+ * Audio only. The number of bytes per coded audio frame, required by some
+ * formats.
+ *
+ * Corresponds to nBlockAlign in WAVEFORMATEX.
+ */
+ int block_align;
+
+ /**
+ * Audio only. The amount of padding (in samples) inserted by the encoder at
+ * the beginning of the audio. I.e. this number of leading decoded samples
+ * must be discarded by the caller to get the original audio without leading
+ * padding.
+ */
+ int initial_padding;
+ /**
+ * Audio only. The amount of padding (in samples) appended by the encoder to
+ * the end of the audio. I.e. this number of decoded samples must be
+ * discarded by the caller from the end of the stream to get the original
+ * audio without any trailing padding.
+ */
+ int trailing_padding;
+} AVCodecParameters;
+
/**
* If c is NULL, returns the first registered codec,
* if c is non-NULL, returns the next registered codec after c,
* important mainly for encoders, e.g. libx264).
*
* @return An AVCodecContext filled with default values or NULL on failure.
- * @see avcodec_get_context_defaults
*/
AVCodecContext *avcodec_alloc_context3(const AVCodec *codec);
*/
void avcodec_free_context(AVCodecContext **avctx);
+#if FF_API_GET_CONTEXT_DEFAULTS
/**
- * Set the fields of the given AVCodecContext to default values corresponding
- * to the given codec (defaults may be codec-dependent).
- *
- * Do not call this function if a non-NULL codec has been passed
- * to avcodec_alloc_context3() that allocated this AVCodecContext.
- * If codec is non-NULL, it is illegal to call avcodec_open2() with a
- * different codec on this AVCodecContext.
+ * @deprecated This function should not be used, as closing and opening a codec
+ * context multiple time is not supported. A new codec context should be
+ * allocated for each new use.
*/
int avcodec_get_context_defaults3(AVCodecContext *s, const AVCodec *codec);
+#endif
/**
* Get the AVClass for AVCodecContext. It can be used in combination with
*/
const AVClass *avcodec_get_class(void);
+#if FF_API_COPY_CONTEXT
/**
* Copy the settings of the source AVCodecContext into the destination
* AVCodecContext. The resulting destination codec context will be
* avcodec_alloc_context3(), but otherwise uninitialized
* @param src source codec context
* @return AVERROR() on error (e.g. memory allocation error), 0 on success
+ *
+ * @deprecated The semantics of this function are ill-defined and it should not
+ * be used. If you need to transfer the stream parameters from one codec context
+ * to another, use an intermediate AVCodecParameters instance and the
+ * avcodec_parameters_from_context() / avcodec_parameters_to_context()
+ * functions.
*/
+attribute_deprecated
int avcodec_copy_context(AVCodecContext *dest, const AVCodecContext *src);
+#endif
+
+/**
+ * Allocate a new AVCodecParameters and set its fields to default values
+ * (unknown/invalid/0). The returned struct must be freed with
+ * avcodec_parameters_free().
+ */
+AVCodecParameters *avcodec_parameters_alloc(void);
+
+/**
+ * Free an AVCodecParameters instance and everything associated with it and
+ * write NULL to the supplied pointer.
+ */
+void avcodec_parameters_free(AVCodecParameters **par);
+
+/**
+ * Copy the contents of src to dst. Any allocated fields in dst are freed and
+ * replaced with newly allocated duplicates of the corresponding fields in src.
+ *
+ * @return >= 0 on success, a negative AVERROR code on failure.
+ */
+int avcodec_parameters_copy(AVCodecParameters *dst, const AVCodecParameters *src);
+
+/**
+ * Fill the parameters struct based on the values from the supplied codec
+ * context. Any allocated fields in par are freed and replaced with duplicates
+ * of the corresponding fields in codec.
+ *
+ * @return >= 0 on success, a negative AVERROR code on failure
+ */
+int avcodec_parameters_from_context(AVCodecParameters *par,
+ const AVCodecContext *codec);
+
+/**
+ * Fill the codec context based on the values from the supplied codec
+ * parameters. Any allocated fields in codec that have a corresponding field in
+ * par are freed and replaced with duplicates of the corresponding field in par.
+ * Fields in codec that do not have a counterpart in par are not touched.
+ *
+ * @return >= 0 on success, a negative AVERROR code on failure.
+ */
+int avcodec_parameters_to_context(AVCodecContext *codec,
+ const AVCodecParameters *par);
/**
* Initialize the AVCodecContext to use the given AVCodec. Prior to using this
* @warning This function is not thread safe!
*
* @note Always call this function before using decoding routines (such as
- * @ref avcodec_decode_video2()).
+ * @ref avcodec_receive_frame()).
*
* @code
* avcodec_register_all();
* @param avctx The context to initialize.
* @param codec The codec to open this context for. If a non-NULL codec has been
* previously passed to avcodec_alloc_context3() or
- * avcodec_get_context_defaults3() for this context, then this
- * parameter MUST be either NULL or equal to the previously passed
- * codec.
+ * for this context, then this parameter MUST be either NULL or
+ * equal to the previously passed codec.
* @param options A dictionary filled with AVCodecContext and codec-private options.
* On return this object will be filled with options that were not found.
*
* (but not the AVCodecContext itself).
*
* Calling this function on an AVCodecContext that hasn't been opened will free
- * the codec-specific data allocated in avcodec_alloc_context3() /
- * avcodec_get_context_defaults3() with a non-NULL codec. Subsequent calls will
- * do nothing.
+ * the codec-specific data allocated in avcodec_alloc_context3() with a non-NULL
+ * codec. Subsequent calls will do nothing.
+ *
+ * @note Do not use this function. Use avcodec_free_context() to destroy a
+ * codec context (either open or closed). Opening and closing a codec context
+ * multiple times is not supported anymore -- use multiple codec contexts
+ * instead.
*/
int avcodec_close(AVCodecContext *avctx);
* @see av_packet_alloc
* @see av_packet_ref
*/
-AVPacket *av_packet_clone(AVPacket *src);
+AVPacket *av_packet_clone(const AVPacket *src);
/**
* Free the packet, if the packet is reference counted, it will be
* unreferenced first.
*
- * @param packet packet to be freed. The pointer will be set to NULL.
+ * @param pkt packet to be freed. The pointer will be set to NULL.
* @note passing NULL is a no-op.
*/
void av_packet_free(AVPacket **pkt);
*
* @return 0 on success, a negative AVERROR on error.
*/
-int av_packet_ref(AVPacket *dst, AVPacket *src);
+int av_packet_ref(AVPacket *dst, const AVPacket *src);
/**
* Wipe the packet.
* @param src Source packet
*
* @return 0 on success AVERROR on failure.
- *
*/
int av_packet_copy_props(AVPacket *dst, const AVPacket *src);
*/
int avcodec_default_get_buffer2(AVCodecContext *s, AVFrame *frame, int flags);
-#if FF_API_EMU_EDGE
-/**
- * Return the amount of padding in pixels which the get_buffer callback must
- * provide around the edge of the image for codecs which do not have the
- * CODEC_FLAG_EMU_EDGE flag.
- *
- * @return Required padding in pixels.
- *
- * @deprecated CODEC_FLAG_EMU_EDGE is deprecated, so this function is no longer
- * needed
- */
-attribute_deprecated
-unsigned avcodec_get_edge_width(void);
-#endif
-
/**
* Modify width and height values so that they will result in a memory
* buffer that is acceptable for the codec if you do not use any horizontal
* @return A negative error code is returned if an error occurred during
* decoding, otherwise the number of bytes consumed from the input
* AVPacket is returned.
+ *
+* @deprecated Use avcodec_send_packet() and avcodec_receive_frame().
*/
+attribute_deprecated
int avcodec_decode_audio4(AVCodecContext *avctx, AVFrame *frame,
int *got_frame_ptr, AVPacket *avpkt);
* next call to this function or until closing or flushing the
* decoder. The caller may not write to it.
*
- * @param[in] avpkt The input AVpacket containing the input buffer.
+ * @param[in] avpkt The input AVPacket containing the input buffer.
* You can create such packet with av_init_packet() and by then setting
* data and size, some decoders might in addition need other fields like
* flags&AV_PKT_FLAG_KEY. All decoders are designed to use the least
* @param[in,out] got_picture_ptr Zero if no frame could be decompressed, otherwise, it is nonzero.
* @return On error a negative value is returned, otherwise the number of bytes
* used or zero if no frame could be decompressed.
+ *
+ * @deprecated Use avcodec_send_packet() and avcodec_receive_frame().
*/
+attribute_deprecated
int avcodec_decode_video2(AVCodecContext *avctx, AVFrame *picture,
int *got_picture_ptr,
AVPacket *avpkt);
int *got_sub_ptr,
AVPacket *avpkt);
+/**
+ * Supply raw packet data as input to a decoder.
+ *
+ * Internally, this call will copy relevant AVCodecContext fields, which can
+ * influence decoding per-packet, and apply them when the packet is actually
+ * decoded. (For example AVCodecContext.skip_frame, which might direct the
+ * decoder to drop the frame contained by the packet sent with this function.)
+ *
+ * @warning The input buffer, avpkt->data must be AV_INPUT_BUFFER_PADDING_SIZE
+ * larger than the actual read bytes because some optimized bitstream
+ * readers read 32 or 64 bits at once and could read over the end.
+ *
+ * @warning Do not mix this API with the legacy API (like avcodec_decode_video2())
+ * on the same AVCodecContext. It will return unexpected results now
+ * or in future libavcodec versions.
+ *
+ * @note The AVCodecContext MUST have been opened with @ref avcodec_open2()
+ * before packets may be fed to the decoder.
+ *
+ * @param avctx codec context
+ * @param[in] avpkt The input AVPacket. Usually, this will be a single video
+ * frame, or several complete audio frames.
+ * Ownership of the packet remains with the caller, and the
+ * decoder will not write to the packet. The decoder may create
+ * a reference to the packet data (or copy it if the packet is
+ * not reference-counted).
+ * Unlike with older APIs, the packet is always fully consumed,
+ * and if it contains multiple frames (e.g. some audio codecs),
+ * will require you to call avcodec_receive_frame() multiple
+ * times afterwards before you can send a new packet.
+ * It can be NULL (or an AVPacket with data set to NULL and
+ * size set to 0); in this case, it is considered a flush
+ * packet, which signals the end of the stream. Sending the
+ * first flush packet will return success. Subsequent ones are
+ * unnecessary and will return AVERROR_EOF. If the decoder
+ * still has frames buffered, it will return them after sending
+ * a flush packet.
+ *
+ * @return 0 on success, otherwise negative error code:
+ * AVERROR(EAGAIN): input is not accepted in the current state - user
+ * must read output with avcodec_receive_frame() (once
+ * all output is read, the packet should be resent, and
+ * the call will not fail with EAGAIN).
+ * AVERROR_EOF: the decoder has been flushed, and no new packets can
+ * be sent to it (also returned if more than 1 flush
+ * packet is sent)
+ * AVERROR(EINVAL): codec not opened, it is an encoder, or requires flush
+ * AVERROR(ENOMEM): failed to add packet to internal queue, or similar
+ * other errors: legitimate decoding errors
+ */
+int avcodec_send_packet(AVCodecContext *avctx, const AVPacket *avpkt);
+
+/**
+ * Return decoded output data from a decoder.
+ *
+ * @param avctx codec context
+ * @param frame This will be set to a reference-counted video or audio
+ * frame (depending on the decoder type) allocated by the
+ * decoder. Note that the function will always call
+ * av_frame_unref(frame) before doing anything else.
+ *
+ * @return
+ * 0: success, a frame was returned
+ * AVERROR(EAGAIN): output is not available in this state - user must try
+ * to send new input
+ * AVERROR_EOF: the decoder has been fully flushed, and there will be
+ * no more output frames
+ * AVERROR(EINVAL): codec not opened, or it is an encoder
+ * other negative values: legitimate decoding errors
+ */
+int avcodec_receive_frame(AVCodecContext *avctx, AVFrame *frame);
+
+/**
+ * Supply a raw video or audio frame to the encoder. Use avcodec_receive_packet()
+ * to retrieve buffered output packets.
+ *
+ * @param avctx codec context
+ * @param[in] frame AVFrame containing the raw audio or video frame to be encoded.
+ * Ownership of the frame remains with the caller, and the
+ * encoder will not write to the frame. The encoder may create
+ * a reference to the frame data (or copy it if the frame is
+ * not reference-counted).
+ * It can be NULL, in which case it is considered a flush
+ * packet. This signals the end of the stream. If the encoder
+ * still has packets buffered, it will return them after this
+ * call. Once flushing mode has been entered, additional flush
+ * packets are ignored, and sending frames will return
+ * AVERROR_EOF.
+ *
+ * For audio:
+ * If AV_CODEC_CAP_VARIABLE_FRAME_SIZE is set, then each frame
+ * can have any number of samples.
+ * If it is not set, frame->nb_samples must be equal to
+ * avctx->frame_size for all frames except the last.
+ * The final frame may be smaller than avctx->frame_size.
+ * @return 0 on success, otherwise negative error code:
+ * AVERROR(EAGAIN): input is not accepted in the current state - user
+ * must read output with avcodec_receive_packet() (once
+ * all output is read, the packet should be resent, and
+ * the call will not fail with EAGAIN).
+ * AVERROR_EOF: the encoder has been flushed, and no new frames can
+ * be sent to it
+ * AVERROR(EINVAL): codec not opened, refcounted_frames not set, it is a
+ * decoder, or requires flush
+ * AVERROR(ENOMEM): failed to add packet to internal queue, or similar
+ * other errors: legitimate decoding errors
+ */
+int avcodec_send_frame(AVCodecContext *avctx, const AVFrame *frame);
+
+/**
+ * Read encoded data from the encoder.
+ *
+ * @param avctx codec context
+ * @param avpkt This will be set to a reference-counted packet allocated by the
+ * encoder. Note that the function will always call
+ * av_frame_unref(frame) before doing anything else.
+ * @return 0 on success, otherwise negative error code:
+ * AVERROR(EAGAIN): output is not available in the current state - user
+ * must try to send input
+ * AVERROR_EOF: the encoder has been fully flushed, and there will be
+ * no more output packets
+ * AVERROR(EINVAL): codec not opened, or it is an encoder
+ * other errors: legitimate decoding errors
+ */
+int avcodec_receive_packet(AVCodecContext *avctx, AVPacket *avpkt);
+
+
/**
* @defgroup lavc_parsing Frame parsing
* @{
* value of got_packet_ptr is undefined and should
* not be used.
* @return 0 on success, negative error code on failure
+ *
+ * @deprecated use avcodec_send_frame()/avcodec_receive_packet() instead
*/
+attribute_deprecated
int avcodec_encode_audio2(AVCodecContext *avctx, AVPacket *avpkt,
const AVFrame *frame, int *got_packet_ptr);
* value of got_packet_ptr is undefined and should
* not be used.
* @return 0 on success, negative error code on failure
+ *
+ * @deprecated use avcodec_send_frame()/avcodec_receive_packet() instead
*/
+attribute_deprecated
int avcodec_encode_video2(AVCodecContext *avctx, AVPacket *avpkt,
const AVFrame *frame, int *got_packet_ptr);
* @{
*/
-/**
- * @deprecated Use av_pix_fmt_get_chroma_sub_sample
- */
-
-void attribute_deprecated avcodec_get_chroma_sub_sample(enum AVPixelFormat pix_fmt, int *h_shift, int *v_shift);
-
/**
* Return a value representing the fourCC code associated to the
* pixel format pix_fmt, or 0 if no associated fourCC code can be
* @}
*/
-#if FF_API_SET_DIMENSIONS
-/**
- * @deprecated this function is not supposed to be used from outside of lavc
- */
-attribute_deprecated
-void avcodec_set_dimensions(AVCodecContext *s, int width, int height);
-#endif
-
/**
* Put a string representing the codec tag codec_tag in buf.
*
*/
const char *av_get_profile_name(const AVCodec *codec, int profile);
+/**
+ * Return a name for the specified profile, if available.
+ *
+ * @param codec_id the ID of the codec to which the requested profile belongs
+ * @param profile the profile value for which a name is requested
+ * @return A name for the profile if found, NULL otherwise.
+ *
+ * @note unlike av_get_profile_name(), which searches a list of profiles
+ * supported by a specific decoder or encoder implementation, this
+ * function searches the list of profiles from the AVCodecDescriptor
+ */
+const char *avcodec_profile_name(enum AVCodecID codec_id, int profile);
+
int avcodec_default_execute(AVCodecContext *c, int (*func)(AVCodecContext *c2, void *arg2),void *arg, int *ret, int count, int size);
int avcodec_default_execute2(AVCodecContext *c, int (*func)(AVCodecContext *c2, void *arg2, int, int),void *arg, int *ret, int count);
//FIXME func typedef
*/
int av_get_audio_frame_duration(AVCodecContext *avctx, int frame_bytes);
+/**
+ * This function is the same as av_get_audio_frame_duration(), except it works
+ * with AVCodecParameters instead of an AVCodecContext.
+ */
+int av_get_audio_frame_duration2(AVCodecParameters *par, int frame_bytes);
+#if FF_API_OLD_BSF
typedef struct AVBitStreamFilterContext {
void *priv_data;
struct AVBitStreamFilter *filter;
AVCodecParserContext *parser;
struct AVBitStreamFilterContext *next;
} AVBitStreamFilterContext;
+#endif
+
+typedef struct AVBSFInternal AVBSFInternal;
+
+/**
+ * The bitstream filter state.
+ *
+ * This struct must be allocated with av_bsf_alloc() and freed with
+ * av_bsf_free().
+ *
+ * The fields in the struct will only be changed (by the caller or by the
+ * filter) as described in their documentation, and are to be considered
+ * immutable otherwise.
+ */
+typedef struct AVBSFContext {
+ /**
+ * A class for logging and AVOptions
+ */
+ const AVClass *av_class;
+ /**
+ * The bitstream filter this context is an instance of.
+ */
+ const struct AVBitStreamFilter *filter;
+
+ /**
+ * Opaque libavcodec internal data. Must not be touched by the caller in any
+ * way.
+ */
+ AVBSFInternal *internal;
+
+ /**
+ * Opaque filter-specific private data. If filter->priv_class is non-NULL,
+ * this is an AVOptions-enabled struct.
+ */
+ void *priv_data;
+
+ /**
+ * Parameters of the input stream. This field is allocated in
+ * av_bsf_alloc(), it needs to be filled by the caller before
+ * av_bsf_init().
+ */
+ AVCodecParameters *par_in;
+
+ /**
+ * Parameters of the output stream. This field is allocated in
+ * av_bsf_alloc(), it is set by the filter in av_bsf_init().
+ */
+ AVCodecParameters *par_out;
+
+ /**
+ * The timebase used for the timestamps of the input packets. Set by the
+ * caller before av_bsf_init().
+ */
+ AVRational time_base_in;
+
+ /**
+ * The timebase used for the timestamps of the output packets. Set by the
+ * filter in av_bsf_init().
+ */
+ AVRational time_base_out;
+} AVBSFContext;
typedef struct AVBitStreamFilter {
const char *name;
+
+ /**
+ * A list of codec ids supported by the filter, terminated by
+ * AV_CODEC_ID_NONE.
+ * May be NULL, in that case the bitstream filter works with any codec id.
+ */
+ const enum AVCodecID *codec_ids;
+
+ /**
+ * A class for the private data, used to declare bitstream filter private
+ * AVOptions. This field is NULL for bitstream filters that do not declare
+ * any options.
+ *
+ * If this field is non-NULL, the first member of the filter private data
+ * must be a pointer to AVClass, which will be set by libavcodec generic
+ * code to this class.
+ */
+ const AVClass *priv_class;
+
+ /*****************************************************************
+ * No fields below this line are part of the public API. They
+ * may not be used outside of libavcodec and can be changed and
+ * removed at will.
+ * New public fields should be added right above.
+ *****************************************************************
+ */
+
int priv_data_size;
- int (*filter)(AVBitStreamFilterContext *bsfc,
- AVCodecContext *avctx, const char *args,
- uint8_t **poutbuf, int *poutbuf_size,
- const uint8_t *buf, int buf_size, int keyframe);
- void (*close)(AVBitStreamFilterContext *bsfc);
- struct AVBitStreamFilter *next;
+ int (*init)(AVBSFContext *ctx);
+ int (*filter)(AVBSFContext *ctx, AVPacket *pkt);
+ void (*close)(AVBSFContext *ctx);
} AVBitStreamFilter;
+#if FF_API_OLD_BSF
+/**
+ * @deprecated the old bitstream filtering API (using AVBitStreamFilterContext)
+ * is deprecated. Use the new bitstream filtering API (using AVBSFContext).
+ */
+attribute_deprecated
void av_register_bitstream_filter(AVBitStreamFilter *bsf);
+attribute_deprecated
AVBitStreamFilterContext *av_bitstream_filter_init(const char *name);
+attribute_deprecated
int av_bitstream_filter_filter(AVBitStreamFilterContext *bsfc,
AVCodecContext *avctx, const char *args,
uint8_t **poutbuf, int *poutbuf_size,
const uint8_t *buf, int buf_size, int keyframe);
+attribute_deprecated
void av_bitstream_filter_close(AVBitStreamFilterContext *bsf);
-
+attribute_deprecated
AVBitStreamFilter *av_bitstream_filter_next(const AVBitStreamFilter *f);
+#endif
+
+/**
+ * @return a bitstream filter with the specified name or NULL if no such
+ * bitstream filter exists.
+ */
+const AVBitStreamFilter *av_bsf_get_by_name(const char *name);
+
+/**
+ * Iterate over all registered bitstream filters.
+ *
+ * @param opaque a pointer where libavcodec will store the iteration state. Must
+ * point to NULL to start the iteration.
+ *
+ * @return the next registered bitstream filter or NULL when the iteration is
+ * finished
+ */
+const AVBitStreamFilter *av_bsf_next(void **opaque);
+
+/**
+ * Allocate a context for a given bitstream filter. The caller must fill in the
+ * context parameters as described in the documentation and then call
+ * av_bsf_init() before sending any data to the filter.
+ *
+ * @param filter the filter for which to allocate an instance.
+ * @param ctx a pointer into which the pointer to the newly-allocated context
+ * will be written. It must be freed with av_bsf_free() after the
+ * filtering is done.
+ *
+ * @return 0 on success, a negative AVERROR code on failure
+ */
+int av_bsf_alloc(const AVBitStreamFilter *filter, AVBSFContext **ctx);
+
+/**
+ * Prepare the filter for use, after all the parameters and options have been
+ * set.
+ */
+int av_bsf_init(AVBSFContext *ctx);
+
+/**
+ * Submit a packet for filtering.
+ *
+ * After sending each packet, the filter must be completely drained by calling
+ * av_bsf_receive_packet() repeatedly until it returns AVERROR(EAGAIN) or
+ * AVERROR_EOF.
+ *
+ * @param pkt the packet to filter. The bitstream filter will take ownership of
+ * the packet and reset the contents of pkt. pkt is not touched if an error occurs.
+ * This parameter may be NULL, which signals the end of the stream (i.e. no more
+ * packets will be sent). That will cause the filter to output any packets it
+ * may have buffered internally.
+ *
+ * @return 0 on success, a negative AVERROR on error.
+ */
+int av_bsf_send_packet(AVBSFContext *ctx, AVPacket *pkt);
+
+/**
+ * Retrieve a filtered packet.
+ *
+ * @param[out] pkt this struct will be filled with the contents of the filtered
+ * packet. It is owned by the caller and must be freed using
+ * av_packet_unref() when it is no longer needed.
+ * This parameter should be "clean" (i.e. freshly allocated
+ * with av_packet_alloc() or unreffed with av_packet_unref())
+ * when this function is called. If this function returns
+ * successfully, the contents of pkt will be completely
+ * overwritten by the returned data. On failure, pkt is not
+ * touched.
+ *
+ * @return 0 on success. AVERROR(EAGAIN) if more packets need to be sent to the
+ * filter (using av_bsf_send_packet()) to get more output. AVERROR_EOF if there
+ * will be no further output from the filter. Another negative AVERROR value if
+ * an error occurs.
+ *
+ * @note one input packet may result in several output packets, so after sending
+ * a packet with av_bsf_send_packet(), this function needs to be called
+ * repeatedly until it stops returning 0. It is also possible for a filter to
+ * output fewer packets than were sent to it, so this function may return
+ * AVERROR(EAGAIN) immediately after a successful av_bsf_send_packet() call.
+ */
+int av_bsf_receive_packet(AVBSFContext *ctx, AVPacket *pkt);
+
+/**
+ * Free a bitstream filter context and everything associated with it; write NULL
+ * into the supplied pointer.
+ */
+void av_bsf_free(AVBSFContext **ctx);
+
+/**
+ * Get the AVClass for AVBSFContext. It can be used in combination with
+ * AV_OPT_SEARCH_FAKE_OBJ for examining options.
+ *
+ * @see av_opt_find().
+ */
+const AVClass *av_bsf_get_class(void);
/* memory */
*
* Same behaviour av_fast_malloc but the buffer has additional
* AV_INPUT_PADDING_SIZE at the end which will always memset to 0.
- *
*/
void av_fast_padded_malloc(void *ptr, unsigned int *size, size_t min_size);
*/
unsigned int av_xiphlacing(unsigned char *s, unsigned int v);
-#if FF_API_MISSING_SAMPLE
-/**
- * Log a generic warning message about a missing feature. This function is
- * intended to be used internally by Libav (libavcodec, libavformat, etc.)
- * only, and would normally not be used by applications.
- * @param[in] avc a pointer to an arbitrary struct of which the first field is
- * a pointer to an AVClass struct
- * @param[in] feature string containing the name of the missing feature
- * @param[in] want_sample indicates if samples are wanted which exhibit this feature.
- * If want_sample is non-zero, additional verbage will be added to the log
- * message which tells the user how to report samples to the development
- * mailing list.
- * @deprecated Use avpriv_report_missing_feature() instead.
- */
-attribute_deprecated
-void av_log_missing_feature(void *avc, const char *feature, int want_sample);
-
-/**
- * Log a generic warning message asking for a sample. This function is
- * intended to be used internally by Libav (libavcodec, libavformat, etc.)
- * only, and would normally not be used by applications.
- * @param[in] avc a pointer to an arbitrary struct of which the first field is
- * a pointer to an AVClass struct
- * @param[in] msg string containing an optional message, or NULL if no message
- * @deprecated Use avpriv_request_sample() instead.
- */
-attribute_deprecated
-void av_log_ask_for_sample(void *avc, const char *msg, ...) av_printf_format(2, 3);
-#endif /* FF_API_MISSING_SAMPLE */
-
/**
* Register the hardware accelerator hwaccel.
*/
projects / ffmpeg / blobdiff