/**
* @file
- * external API header
+ * @ingroup libavc
+ * Libavcodec external API header
*/
#include <errno.h>
#include "libavutil/samplefmt.h"
+#include "libavutil/attributes.h"
#include "libavutil/avutil.h"
+#include "libavutil/buffer.h"
#include "libavutil/cpu.h"
#include "libavutil/dict.h"
+#include "libavutil/frame.h"
#include "libavutil/log.h"
#include "libavutil/pixfmt.h"
#include "libavutil/rational.h"
-#include "libavcodec/version.h"
+#include "version.h"
+
+#if FF_API_FAST_MALLOC
+// to provide fast_*alloc
+#include "libavutil/mem.h"
+#endif
+
/**
* @defgroup libavc Encoding/Decoding Library
* @{
/* video codecs */
AV_CODEC_ID_MPEG1VIDEO,
AV_CODEC_ID_MPEG2VIDEO, ///< preferred ID for MPEG-1/2 video decoding
+#if FF_API_XVMC
AV_CODEC_ID_MPEG2VIDEO_XVMC,
+#endif /* FF_API_XVMC */
AV_CODEC_ID_H261,
AV_CODEC_ID_H263,
AV_CODEC_ID_RV10,
AV_CODEC_ID_MSZH,
AV_CODEC_ID_ZLIB,
AV_CODEC_ID_QTRLE,
-#if FF_API_SNOW
- AV_CODEC_ID_SNOW,
-#endif
AV_CODEC_ID_TSCC,
AV_CODEC_ID_ULTI,
AV_CODEC_ID_QDRAW,
AV_CODEC_ID_CLLC,
AV_CODEC_ID_MSS2,
AV_CODEC_ID_VP9,
+ AV_CODEC_ID_AIC,
+ AV_CODEC_ID_ESCAPE130,
+ AV_CODEC_ID_G2M,
+ AV_CODEC_ID_WEBP,
+ AV_CODEC_ID_HNM4_VIDEO,
+ AV_CODEC_ID_HEVC,
/* various PCM "codecs" */
AV_CODEC_ID_FIRST_AUDIO = 0x10000, ///< A dummy id pointing at the start of audio codecs
AV_CODEC_ID_PCM_LXF,
AV_CODEC_ID_S302M,
AV_CODEC_ID_PCM_S8_PLANAR,
+ AV_CODEC_ID_PCM_S24LE_PLANAR,
+ AV_CODEC_ID_PCM_S32LE_PLANAR,
/* various ADPCM codecs */
AV_CODEC_ID_ADPCM_IMA_QT = 0x11000,
AV_CODEC_ID_MLP,
AV_CODEC_ID_GSM_MS, /* as found in WAV */
AV_CODEC_ID_ATRAC3,
+#if FF_API_VOXWARE
AV_CODEC_ID_VOXWARE,
+#endif
AV_CODEC_ID_APE,
AV_CODEC_ID_NELLYMOSER,
AV_CODEC_ID_MUSEPACK8,
AV_CODEC_ID_OPUS,
AV_CODEC_ID_COMFORT_NOISE,
AV_CODEC_ID_TAK,
+ AV_CODEC_ID_METASOUND,
/* subtitle codecs */
AV_CODEC_ID_FIRST_SUBTITLE = 0x17000, ///< A dummy ID pointing at the start of subtitle codecs.
AV_CODEC_ID_MPEG4SYSTEMS = 0x20001, /**< _FAKE_ codec to indicate a MPEG-4 Systems
* stream (only used by libavformat) */
AV_CODEC_ID_FFMETADATA = 0x21000, ///< Dummy codec for streams containing only metadata information.
-
-#if FF_API_CODEC_ID
-#include "old_codec_ids.h"
-#endif
};
-#if FF_API_CODEC_ID
-#define CodecID AVCodecID
-#endif
-
/**
* This struct describes the properties of a single codec described by an
* AVCodecID.
*/
#define AV_CODEC_PROP_LOSSLESS (1 << 2)
-#if FF_API_OLD_DECODE_AUDIO
-/* in bytes */
-#define AVCODEC_MAX_AUDIO_FRAME_SIZE 192000 // 1 second of 48khz 32bit audio
-#endif
-
/**
* @ingroup lavc_decoding
* Required number of additionally allocated bytes at the end of the input bitstream for decoding.
ME_X1, ///< reserved for experiments
ME_HEX, ///< hexagon based search
ME_UMH, ///< uneven multi-hexagon search
-#if FF_API_SNOW
- ME_ITER, ///< iterative search
-#endif
ME_TESA, ///< transformed exhaustive search algorithm
};
AVCOL_PRI_SMPTE170M = 6, ///< also ITU-R BT601-6 525 / ITU-R BT1358 525 / ITU-R BT1700 NTSC
AVCOL_PRI_SMPTE240M = 7, ///< functionally identical to above
AVCOL_PRI_FILM = 8,
+ AVCOL_PRI_BT2020 = 9, ///< ITU-R BT2020
AVCOL_PRI_NB , ///< Not part of ABI
};
enum AVColorTransferCharacteristic{
- AVCOL_TRC_BT709 = 1, ///< also ITU-R BT1361
- AVCOL_TRC_UNSPECIFIED = 2,
- AVCOL_TRC_GAMMA22 = 4, ///< also ITU-R BT470M / ITU-R BT1700 625 PAL & SECAM
- AVCOL_TRC_GAMMA28 = 5, ///< also ITU-R BT470BG
- AVCOL_TRC_SMPTE240M = 7,
- AVCOL_TRC_NB , ///< Not part of ABI
+ AVCOL_TRC_BT709 = 1, ///< also ITU-R BT1361
+ AVCOL_TRC_UNSPECIFIED = 2,
+ AVCOL_TRC_GAMMA22 = 4, ///< also ITU-R BT470M / ITU-R BT1700 625 PAL & SECAM
+ AVCOL_TRC_GAMMA28 = 5, ///< also ITU-R BT470BG
+ AVCOL_TRC_SMPTE170M = 6, ///< also ITU-R BT601-6 525 or 625 / ITU-R BT1358 525 or 625 / ITU-R BT1700 NTSC
+ AVCOL_TRC_SMPTE240M = 7,
+ AVCOL_TRC_LINEAR = 8, ///< "Linear transfer characteristics"
+ AVCOL_TRC_LOG = 9, ///< "Logarithmic transfer characteristic (100:1 range)"
+ AVCOL_TRC_LOG_SQRT = 10, ///< "Logarithmic transfer characteristic (100 * Sqrt( 10 ) : 1 range)"
+ AVCOL_TRC_IEC61966_2_4 = 11, ///< IEC 61966-2-4
+ AVCOL_TRC_BT1361_ECG = 12, ///< ITU-R BT1361 Extended Colour Gamut
+ AVCOL_TRC_IEC61966_2_1 = 13, ///< IEC 61966-2-1 (sRGB or sYCC)
+ AVCOL_TRC_BT2020_10 = 14, ///< ITU-R BT2020 for 10 bit system
+ AVCOL_TRC_BT2020_12 = 15, ///< ITU-R BT2020 for 12 bit system
+ AVCOL_TRC_NB , ///< Not part of ABI
};
enum AVColorSpace{
- AVCOL_SPC_RGB = 0,
- AVCOL_SPC_BT709 = 1, ///< also ITU-R BT1361 / IEC 61966-2-4 xvYCC709 / SMPTE RP177 Annex B
- AVCOL_SPC_UNSPECIFIED = 2,
- AVCOL_SPC_FCC = 4,
- AVCOL_SPC_BT470BG = 5, ///< also ITU-R BT601-6 625 / ITU-R BT1358 625 / ITU-R BT1700 625 PAL & SECAM / IEC 61966-2-4 xvYCC601
- AVCOL_SPC_SMPTE170M = 6, ///< also ITU-R BT601-6 525 / ITU-R BT1358 525 / ITU-R BT1700 NTSC / functionally identical to above
- AVCOL_SPC_SMPTE240M = 7,
- AVCOL_SPC_YCOCG = 8, ///< Used by Dirac / VC-2 and H.264 FRext, see ITU-T SG16
- AVCOL_SPC_NB , ///< Not part of ABI
+ AVCOL_SPC_RGB = 0,
+ AVCOL_SPC_BT709 = 1, ///< also ITU-R BT1361 / IEC 61966-2-4 xvYCC709 / SMPTE RP177 Annex B
+ AVCOL_SPC_UNSPECIFIED = 2,
+ AVCOL_SPC_FCC = 4,
+ AVCOL_SPC_BT470BG = 5, ///< also ITU-R BT601-6 625 / ITU-R BT1358 625 / ITU-R BT1700 625 PAL & SECAM / IEC 61966-2-4 xvYCC601
+ AVCOL_SPC_SMPTE170M = 6, ///< also ITU-R BT601-6 525 / ITU-R BT1358 525 / ITU-R BT1700 NTSC / functionally identical to above
+ AVCOL_SPC_SMPTE240M = 7,
+ AVCOL_SPC_YCOCG = 8, ///< Used by Dirac / VC-2 and H.264 FRext, see ITU-T SG16
+ AVCOL_SPC_BT2020_NCL = 9, ///< ITU-R BT2020 non-constant luminance system
+ AVCOL_SPC_BT2020_CL = 10, ///< ITU-R BT2020 constant luminance system
+ AVCOL_SPC_NB , ///< Not part of ABI
};
enum AVColorRange{
float quality_factor;
} RcOverride;
+#if FF_API_MAX_BFRAMES
+/**
+ * @deprecated there is no libavcodec-wide limit on the number of B-frames
+ */
#define FF_MAX_B_FRAMES 16
+#endif
/* encoding support
These flags can be passed in AVCodecContext.flags before initialization.
Note: Not everything is supported yet.
*/
+/**
+ * Allow decoders to produce frames with data planes that are not aligned
+ * to CPU requirements (e.g. due to cropping).
+ */
+#define CODEC_FLAG_UNALIGNED 0x0001
#define CODEC_FLAG_QSCALE 0x0002 ///< Use fixed qscale.
#define CODEC_FLAG_4MV 0x0004 ///< 4 MV per MB allowed / advanced prediction for H.263.
+#define CODEC_FLAG_OUTPUT_CORRUPT 0x0008 ///< Output even those frames that might be corrupted
#define CODEC_FLAG_QPEL 0x0010 ///< Use qpel MC.
#define CODEC_FLAG_GMC 0x0020 ///< Use GMC.
#define CODEC_FLAG_MV0 0x0040 ///< Always try a MB with MV=<0,0>.
#define CODEC_FLAG2_FAST 0x00000001 ///< Allow non spec compliant speedup tricks.
#define CODEC_FLAG2_NO_OUTPUT 0x00000004 ///< Skip bitstream encoding.
#define CODEC_FLAG2_LOCAL_HEADER 0x00000008 ///< Place global headers at every keyframe instead of in extradata.
-#if FF_API_MPV_GLOBAL_OPTS
-#define CODEC_FLAG_CBP_RD 0x04000000 ///< Use rate distortion optimization for cbp.
-#define CODEC_FLAG_QP_RD 0x08000000 ///< Use rate distortion optimization for qp selectioon.
-#define CODEC_FLAG2_STRICT_GOP 0x00000002 ///< Strictly enforce GOP size.
-#define CODEC_FLAG2_SKIP_RD 0x00004000 ///< RD optimal MB level residual skipping
-#endif
+#define CODEC_FLAG2_IGNORE_CROP 0x00010000 ///< Discard cropping information from SPS.
+
#define CODEC_FLAG2_CHUNKS 0x00008000 ///< Input bitstream might be truncated at a packet boundaries instead of only at frame boundaries.
/* Unsupported options :
*/
#define CODEC_CAP_DR1 0x0002
#define CODEC_CAP_TRUNCATED 0x0008
+#if FF_API_XVMC
/* Codec can export data for HW decoding (XvMC). */
#define CODEC_CAP_HWACCEL 0x0010
+#endif /* FF_API_XVMC */
/**
* Encoder or decoder requires flushing with NULL input at the end in order to
* give the complete and correct output.
* This can be used to prevent truncation of the last audio samples.
*/
#define CODEC_CAP_SMALL_LAST_FRAME 0x0040
+#if FF_API_CAP_VDPAU
/**
* Codec can export data for HW decoding (VDPAU).
*/
#define CODEC_CAP_HWACCEL_VDPAU 0x0080
+#endif
/**
* Codec can output multiple frames per AVPacket
* Normally demuxers return one frame at a time, demuxers which do not do
* Codec should fill in channel configuration and samplerate instead of container
*/
#define CODEC_CAP_CHANNEL_CONF 0x0400
+#if FF_API_NEG_LINESIZES
/**
- * Codec is able to deal with negative linesizes
+ * @deprecated no codecs use this capability
*/
#define CODEC_CAP_NEG_LINESIZES 0x0800
+#endif
/**
* Codec supports frame-level multithreading.
*/
*/
#define CODEC_CAP_VARIABLE_FRAME_SIZE 0x10000
+#if FF_API_MB_TYPE
//The following defines may change, don't expect compatibility if you use them.
#define MB_TYPE_INTRA4x4 0x0001
#define MB_TYPE_INTRA16x16 0x0002 //FIXME H.264-specific
#define MB_TYPE_QUANT 0x00010000
#define MB_TYPE_CBP 0x00020000
//Note bits 24-31 are reserved for codec specific use (h264 ref0, mpeg1 0mv, ...)
+#endif
/**
* Pan Scan area.
int16_t position[3][2];
}AVPanScan;
+#if FF_API_QSCALE_TYPE
#define FF_QSCALE_TYPE_MPEG1 0
#define FF_QSCALE_TYPE_MPEG2 1
#define FF_QSCALE_TYPE_H264 2
#define FF_QSCALE_TYPE_VP56 3
+#endif
+#if FF_API_GET_BUFFER
#define FF_BUFFER_TYPE_INTERNAL 1
#define FF_BUFFER_TYPE_USER 2 ///< direct rendering buffers (image is (de)allocated by user)
#define FF_BUFFER_TYPE_SHARED 4 ///< Buffer from somewhere else; don't deallocate image (data/base), all other tables are not shared.
#define FF_BUFFER_HINTS_READABLE 0x02 // Codec will read from buffer.
#define FF_BUFFER_HINTS_PRESERVE 0x04 // User must not alter buffer content.
#define FF_BUFFER_HINTS_REUSABLE 0x08 // Codec will reuse the buffer (update).
+#endif
+
+/**
+ * The decoder will keep a reference to the frame and may reuse it later.
+ */
+#define AV_GET_BUFFER_FLAG_REF (1 << 0)
/**
* @defgroup lavc_packet AVPacket
* ABI. Thus it may be allocated on stack and no new fields can be added to it
* without libavcodec and libavformat major bump.
*
- * The semantics of data ownership depends on the destruct field.
- * If it is set, the packet data is dynamically allocated and is valid
- * indefinitely until av_free_packet() is called (which in turn calls the
- * destruct callback to free the data). If destruct is not set, the packet data
- * is typically backed by some static buffer somewhere and is only valid for a
- * limited time (e.g. until the next read call when demuxing).
+ * The semantics of data ownership depends on the buf or destruct (deprecated)
+ * fields. If either is set, the packet data is dynamically allocated and is
+ * valid indefinitely until av_free_packet() is called (which in turn calls
+ * av_buffer_unref()/the destruct callback to free the data). If neither is set,
+ * the packet data is typically backed by some static buffer somewhere and is
+ * only valid for a limited time (e.g. until the next read call when demuxing).
*
* The side data is always allocated with av_malloc() and is freed in
* av_free_packet().
*/
typedef struct AVPacket {
+ /**
+ * A reference to the reference-counted buffer where the packet data is
+ * stored.
+ * May be NULL, then the packet data is not reference-counted.
+ */
+ AVBufferRef *buf;
/**
* Presentation timestamp in AVStream->time_base units; the time at which
* the decompressed packet will be presented to the user.
* Equals next_pts - this_pts in presentation order.
*/
int duration;
+#if FF_API_DESTRUCT_PACKET
+ attribute_deprecated
void (*destruct)(struct AVPacket *);
+ attribute_deprecated
void *priv;
+#endif
int64_t pos; ///< byte position in stream, -1 if unknown
/**
* @}
*/
-/**
- * This structure describes decoded (raw) audio or video data.
- *
- * AVFrame must be allocated using avcodec_alloc_frame() and freed with
- * avcodec_free_frame(). Note that this allocates only the AVFrame itself. The
- * buffers for the data must be managed through other means.
- *
- * AVFrame is typically allocated once and then reused multiple times to hold
- * different data (e.g. a single AVFrame to hold frames received from a
- * decoder). In such a case, avcodec_get_frame_defaults() should be used to
- * reset the frame to its original clean state before it is reused again.
- *
- * sizeof(AVFrame) is not a part of the public ABI, so new fields may be added
- * to the end with a minor bump.
- */
-typedef struct AVFrame {
-#define AV_NUM_DATA_POINTERS 8
- /**
- * pointer to the picture/channel planes.
- * This might be different from the first allocated byte
- * - encoding: Set by user
- * - decoding: set by AVCodecContext.get_buffer()
- */
- uint8_t *data[AV_NUM_DATA_POINTERS];
-
- /**
- * Size, in bytes, of the data for each picture/channel plane.
- *
- * For audio, only linesize[0] may be set. For planar audio, each channel
- * plane must be the same size.
- *
- * - encoding: Set by user
- * - decoding: set by AVCodecContext.get_buffer()
- */
- int linesize[AV_NUM_DATA_POINTERS];
-
- /**
- * pointers to the data planes/channels.
- *
- * For video, this should simply point to data[].
- *
- * For planar audio, each channel has a separate data pointer, and
- * linesize[0] contains the size of each channel buffer.
- * For packed audio, there is just one data pointer, and linesize[0]
- * contains the total size of the buffer for all channels.
- *
- * Note: Both data and extended_data will always be set by get_buffer(),
- * but for planar audio with more channels that can fit in data,
- * extended_data must be used by the decoder in order to access all
- * channels.
- *
- * encoding: set by user
- * decoding: set by AVCodecContext.get_buffer()
- */
- uint8_t **extended_data;
-
- /**
- * width and height of the video frame
- * - encoding: unused
- * - decoding: Read by user.
- */
- int width, height;
-
- /**
- * number of audio samples (per channel) described by this frame
- * - encoding: Set by user
- * - decoding: Set by libavcodec
- */
- int nb_samples;
-
- /**
- * format of the frame, -1 if unknown or unset
- * Values correspond to enum AVPixelFormat for video frames,
- * enum AVSampleFormat for audio)
- * - encoding: unused
- * - decoding: Read by user.
- */
- int format;
-
- /**
- * 1 -> keyframe, 0-> not
- * - encoding: Set by libavcodec.
- * - decoding: Set by libavcodec.
- */
- int key_frame;
-
- /**
- * Picture type of the frame, see ?_TYPE below.
- * - encoding: Set by libavcodec. for coded_picture (and set by user for input).
- * - decoding: Set by libavcodec.
- */
- enum AVPictureType pict_type;
-
- /**
- * pointer to the first allocated byte of the picture. Can be used in get_buffer/release_buffer.
- * This isn't used by libavcodec unless the default get/release_buffer() is used.
- * - encoding:
- * - decoding:
- */
- uint8_t *base[AV_NUM_DATA_POINTERS];
-
- /**
- * sample aspect ratio for the video frame, 0/1 if unknown/unspecified
- * - encoding: unused
- * - decoding: Read by user.
- */
- AVRational sample_aspect_ratio;
-
- /**
- * presentation timestamp in time_base units (time when frame should be shown to user)
- * If AV_NOPTS_VALUE then frame_rate = 1/time_base will be assumed.
- * - encoding: MUST be set by user.
- * - decoding: Set by libavcodec.
- */
- int64_t pts;
-
- /**
- * pts copied from the AVPacket that was decoded to produce this frame
- * - encoding: unused
- * - decoding: Read by user.
- */
- int64_t pkt_pts;
-
- /**
- * dts copied from the AVPacket that triggered returning this frame
- * - encoding: unused
- * - decoding: Read by user.
- */
- int64_t pkt_dts;
-
- /**
- * picture number in bitstream order
- * - encoding: set by
- * - decoding: Set by libavcodec.
- */
- int coded_picture_number;
- /**
- * picture number in display order
- * - encoding: set by
- * - decoding: Set by libavcodec.
- */
- int display_picture_number;
-
- /**
- * quality (between 1 (good) and FF_LAMBDA_MAX (bad))
- * - encoding: Set by libavcodec. for coded_picture (and set by user for input).
- * - decoding: Set by libavcodec.
- */
- int quality;
-
- /**
- * is this picture used as reference
- * The values for this are the same as the MpegEncContext.picture_structure
- * variable, that is 1->top field, 2->bottom field, 3->frame/both fields.
- * Set to 4 for delayed, non-reference frames.
- * - encoding: unused
- * - decoding: Set by libavcodec. (before get_buffer() call)).
- */
- int reference;
-
- /**
- * QP table
- * - encoding: unused
- * - decoding: Set by libavcodec.
- */
- int8_t *qscale_table;
- /**
- * QP store stride
- * - encoding: unused
- * - decoding: Set by libavcodec.
- */
- int qstride;
-
- /**
- *
- */
- int qscale_type;
-
- /**
- * mbskip_table[mb]>=1 if MB didn't change
- * stride= mb_width = (width+15)>>4
- * - encoding: unused
- * - decoding: Set by libavcodec.
- */
- uint8_t *mbskip_table;
-
- /**
- * motion vector table
- * @code
- * example:
- * int mv_sample_log2= 4 - motion_subsample_log2;
- * int mb_width= (width+15)>>4;
- * int mv_stride= (mb_width << mv_sample_log2) + 1;
- * motion_val[direction][x + y*mv_stride][0->mv_x, 1->mv_y];
- * @endcode
- * - encoding: Set by user.
- * - decoding: Set by libavcodec.
- */
- int16_t (*motion_val[2])[2];
-
- /**
- * macroblock type table
- * mb_type_base + mb_width + 2
- * - encoding: Set by user.
- * - decoding: Set by libavcodec.
- */
- uint32_t *mb_type;
-
- /**
- * DCT coefficients
- * - encoding: unused
- * - decoding: Set by libavcodec.
- */
- short *dct_coeff;
-
- /**
- * motion reference frame index
- * the order in which these are stored can depend on the codec.
- * - encoding: Set by user.
- * - decoding: Set by libavcodec.
- */
- int8_t *ref_index[2];
-
- /**
- * for some private data of the user
- * - encoding: unused
- * - decoding: Set by user.
- */
- void *opaque;
-
- /**
- * error
- * - encoding: Set by libavcodec. if flags&CODEC_FLAG_PSNR.
- * - decoding: unused
- */
- uint64_t error[AV_NUM_DATA_POINTERS];
-
- /**
- * type of the buffer (to keep track of who has to deallocate data[*])
- * - encoding: Set by the one who allocates it.
- * - decoding: Set by the one who allocates it.
- * Note: User allocated (direct rendering) & internal buffers cannot coexist currently.
- */
- int type;
-
- /**
- * When decoding, this signals how much the picture must be delayed.
- * extra_delay = repeat_pict / (2*fps)
- * - encoding: unused
- * - decoding: Set by libavcodec.
- */
- int repeat_pict;
-
- /**
- * The content of the picture is interlaced.
- * - encoding: Set by user.
- * - decoding: Set by libavcodec. (default 0)
- */
- int interlaced_frame;
-
- /**
- * If the content is interlaced, is top field displayed first.
- * - encoding: Set by user.
- * - decoding: Set by libavcodec.
- */
- int top_field_first;
-
- /**
- * Tell user application that palette has changed from previous frame.
- * - encoding: ??? (no palette-enabled encoder yet)
- * - decoding: Set by libavcodec. (default 0).
- */
- int palette_has_changed;
-
- /**
- * codec suggestion on buffer type if != 0
- * - encoding: unused
- * - decoding: Set by libavcodec. (before get_buffer() call)).
- */
- int buffer_hints;
-
- /**
- * Pan scan.
- * - encoding: Set by user.
- * - decoding: Set by libavcodec.
- */
- AVPanScan *pan_scan;
-
- /**
- * reordered opaque 64bit (generally an integer or a double precision float
- * PTS but can be anything).
- * The user sets AVCodecContext.reordered_opaque to represent the input at
- * that time,
- * the decoder reorders values as needed and sets AVFrame.reordered_opaque
- * to exactly one of the values provided by the user through AVCodecContext.reordered_opaque
- * @deprecated in favor of pkt_pts
- * - encoding: unused
- * - decoding: Read by user.
- */
- int64_t reordered_opaque;
-
- /**
- * hardware accelerator private data (Libav-allocated)
- * - encoding: unused
- * - decoding: Set by libavcodec
- */
- void *hwaccel_picture_private;
-
- /**
- * the AVCodecContext which ff_thread_get_buffer() was last called on
- * - encoding: Set by libavcodec.
- * - decoding: Set by libavcodec.
- */
- struct AVCodecContext *owner;
-
- /**
- * used by multithreading to store frame-specific info
- * - encoding: Set by libavcodec.
- * - decoding: Set by libavcodec.
- */
- void *thread_opaque;
-
- /**
- * log2 of the size of the block which a single vector in motion_val represents:
- * (4->16x16, 3->8x8, 2-> 4x4, 1-> 2x2)
- * - encoding: unused
- * - decoding: Set by libavcodec.
- */
- uint8_t motion_subsample_log2;
-
- /**
- * Sample rate of the audio data.
- *
- * - encoding: unused
- * - decoding: set by get_buffer()
- */
- int sample_rate;
-
- /**
- * Channel layout of the audio data.
- *
- * - encoding: unused
- * - decoding: set by get_buffer()
- */
- uint64_t channel_layout;
-} AVFrame;
-
struct AVCodecInternal;
enum AVFieldOrder {
*/
unsigned int stream_codec_tag;
-#if FF_API_SUB_ID
- /**
- * @deprecated this field is unused
- */
- attribute_deprecated int sub_id;
-#endif
-
void *priv_data;
/**
/**
* picture width / height.
* - encoding: MUST be set by user.
- * - decoding: Set by libavcodec.
- * Note: For compatibility it is possible to set this instead of
- * coded_width/height before decoding.
+ * - decoding: May be set by the user before opening the decoder if known e.g.
+ * from the container. Some decoders will require the dimensions
+ * to be set by the caller. During decoding, the decoder may
+ * overwrite those values as required.
*/
int width, height;
/**
- * Bitstream width / height, may be different from width/height.
+ * Bitstream width / height, may be different from width/height e.g. when
+ * the decoded frame is cropped before being output.
* - encoding: unused
- * - decoding: Set by user before init if known. Codec should override / dynamically change if needed.
+ * - decoding: May be set by the user before opening the decoder if known
+ * e.g. from the container. During decoding, the decoder may
+ * overwrite those values as required.
*/
int coded_width, coded_height;
+#if FF_API_ASPECT_EXTENDED
#define FF_ASPECT_EXTENDED 15
+#endif
/**
* the number of pictures in a group of pictures, or 0 for intra_only
int b_frame_strategy;
-#if FF_API_MPV_GLOBAL_OPTS
- /**
- * luma single coefficient elimination threshold
- * - encoding: Set by user.
- * - decoding: unused
- */
- attribute_deprecated int luma_elim_threshold;
-
- /**
- * chroma single coeff elimination threshold
- * - encoding: Set by user.
- * - decoding: unused
- */
- attribute_deprecated int chroma_elim_threshold;
-#endif
-
/**
* qscale offset between IP and B-frames
* - encoding: Set by user.
#define FF_CMP_VSAD 8
#define FF_CMP_VSSE 9
#define FF_CMP_NSSE 10
-#if FF_API_SNOW
-#define FF_CMP_W53 11
-#define FF_CMP_W97 12
-#endif
#define FF_CMP_DCTMAX 13
#define FF_CMP_DCT264 14
#define FF_CMP_CHROMA 256
*/
int inter_quant_bias;
-#if FF_API_COLOR_TABLE_ID
- /**
- * color table ID
- * - encoding: unused
- * - decoding: Which clrtable should be used for 8bit RGB images.
- * Tables have to be stored somewhere. FIXME
- */
- attribute_deprecated int color_table_id;
-#endif
-
/**
* slice flags
* - encoding: unused
#define SLICE_FLAG_ALLOW_FIELD 0x0002 ///< allow draw_horiz_band() with field slices (MPEG2 field pics)
#define SLICE_FLAG_ALLOW_PLANE 0x0004 ///< allow draw_horiz_band() with 1 component at a time (SVQ1)
+#if FF_API_XVMC
/**
* XVideo Motion Acceleration
* - encoding: forbidden
* - decoding: set by decoder
+ * @deprecated XvMC support is slated for removal.
*/
- int xvmc_acceleration;
+ attribute_deprecated int xvmc_acceleration;
+#endif /* FF_API_XVMC */
/**
* macroblock decision mode
* - encoding: Set by user.
* - decoding: unused
*/
- int noise_reduction;
-
-#if FF_API_INTER_THRESHOLD
- /**
- * @deprecated this field is unused
- */
- attribute_deprecated int inter_threshold;
-#endif
-
-#if FF_API_MPV_GLOBAL_OPTS
- /**
- * @deprecated use mpegvideo private options instead
- */
- attribute_deprecated int quantizer_noise_shaping;
-#endif
+ int noise_reduction;
/**
* Motion estimation threshold below which no motion estimation is
* - decoding: Set by user.
* @deprecated Deprecated in favor of request_channel_layout.
*/
- int request_channels;
+ attribute_deprecated int request_channels;
#endif
/**
*/
enum AVSampleFormat request_sample_fmt;
+#if FF_API_GET_BUFFER
/**
* Called at the beginning of each frame to get a buffer for it.
*
*
* - encoding: unused
* - decoding: Set by libavcodec, user can override.
+ *
+ * @deprecated use get_buffer2()
*/
+ attribute_deprecated
int (*get_buffer)(struct AVCodecContext *c, AVFrame *pic);
/**
* but not by more than one thread at once, so does not need to be reentrant.
* - encoding: unused
* - decoding: Set by libavcodec, user can override.
+ *
+ * @deprecated custom freeing callbacks should be set from get_buffer2()
*/
+ attribute_deprecated
void (*release_buffer)(struct AVCodecContext *c, AVFrame *pic);
/**
* - encoding: unused
* - decoding: Set by libavcodec, user can override.
*/
+ attribute_deprecated
int (*reget_buffer)(struct AVCodecContext *c, AVFrame *pic);
+#endif
+
+ /**
+ * This callback is called at the beginning of each frame to get data
+ * buffer(s) for it. There may be one contiguous buffer for all the data or
+ * there may be a buffer per each data plane or anything in between. What
+ * this means is, you may set however many entries in buf[] you feel necessary.
+ * Each buffer must be reference-counted using the AVBuffer API (see description
+ * of buf[] below).
+ *
+ * The following fields will be set in the frame before this callback is
+ * called:
+ * - format
+ * - width, height (video only)
+ * - sample_rate, channel_layout, nb_samples (audio only)
+ * Their values may differ from the corresponding values in
+ * AVCodecContext. This callback must use the frame values, not the codec
+ * context values, to calculate the required buffer size.
+ *
+ * This callback must fill the following fields in the frame:
+ * - data[]
+ * - linesize[]
+ * - extended_data:
+ * * if the data is planar audio with more than 8 channels, then this
+ * callback must allocate and fill extended_data to contain all pointers
+ * to all data planes. data[] must hold as many pointers as it can.
+ * extended_data must be allocated with av_malloc() and will be freed in
+ * av_frame_unref().
+ * * otherwise exended_data must point to data
+ * - buf[] must contain one or more pointers to AVBufferRef structures. Each of
+ * the frame's data and extended_data pointers must be contained in these. That
+ * is, one AVBufferRef for each allocated chunk of memory, not necessarily one
+ * AVBufferRef per data[] entry. See: av_buffer_create(), av_buffer_alloc(),
+ * and av_buffer_ref().
+ * - extended_buf and nb_extended_buf must be allocated with av_malloc() by
+ * this callback and filled with the extra buffers if there are more
+ * buffers than buf[] can hold. extended_buf will be freed in
+ * av_frame_unref().
+ *
+ * If CODEC_CAP_DR1 is not set then get_buffer2() must call
+ * avcodec_default_get_buffer2() instead of providing buffers allocated by
+ * some other means.
+ *
+ * Each data plane must be aligned to the maximum required by the target
+ * CPU.
+ *
+ * @see avcodec_default_get_buffer2()
+ *
+ * Video:
+ *
+ * If AV_GET_BUFFER_FLAG_REF is set in flags then the frame may be reused
+ * (read and/or written to if it is writable) later by libavcodec.
+ *
+ * If CODEC_FLAG_EMU_EDGE is not set in s->flags, the buffer must contain an
+ * edge of the size returned by avcodec_get_edge_width() on all sides.
+ *
+ * avcodec_align_dimensions2() should be used to find the required width and
+ * height, as they normally need to be rounded up to the next multiple of 16.
+ *
+ * If frame multithreading is used and thread_safe_callbacks is set,
+ * this callback may be called from a different thread, but not from more
+ * than one at once. Does not need to be reentrant.
+ *
+ * @see avcodec_align_dimensions2()
+ *
+ * Audio:
+ *
+ * Decoders request a buffer of a particular size by setting
+ * AVFrame.nb_samples prior to calling get_buffer2(). The decoder may,
+ * however, utilize only part of the buffer by setting AVFrame.nb_samples
+ * to a smaller value in the output frame.
+ *
+ * As a convenience, av_samples_get_buffer_size() and
+ * av_samples_fill_arrays() in libavutil may be used by custom get_buffer2()
+ * functions to find the required data size and to fill data pointers and
+ * linesize. In AVFrame.linesize, only linesize[0] may be set for audio
+ * since all planes must be the same size.
+ *
+ * @see av_samples_get_buffer_size(), av_samples_fill_arrays()
+ *
+ * - encoding: unused
+ * - decoding: Set by libavcodec, user can override.
+ */
+ int (*get_buffer2)(struct AVCodecContext *s, AVFrame *frame, int flags);
+ /**
+ * If non-zero, the decoded audio and video frames returned from
+ * avcodec_decode_video2() and avcodec_decode_audio4() are reference-counted
+ * and are valid indefinitely. The caller must free them with
+ * av_frame_unref() when they are not needed anymore.
+ * Otherwise, the decoded frames must not be freed by the caller and are
+ * only valid until the next decode call.
+ *
+ * - encoding: unused
+ * - decoding: set by the caller before avcodec_open2().
+ */
+ int refcounted_frames;
/* - encoding parameters */
float qcompress; ///< amount of qscale change between easy & hard scenes (0.0-1.0)
*/
int workaround_bugs;
#define FF_BUG_AUTODETECT 1 ///< autodetection
+#if FF_API_OLD_MSMPEG4
#define FF_BUG_OLD_MSMPEG4 2
+#endif
#define FF_BUG_XVID_ILACE 4
#define FF_BUG_UMP4 8
#define FF_BUG_NO_PADDING 16
#define FF_BUG_AMV 32
+#if FF_API_AC_VLC
#define FF_BUG_AC_VLC 0 ///< Will be removed, libavcodec can now handle these non-compliant files by default.
+#endif
#define FF_BUG_QPEL_CHROMA 64
#define FF_BUG_STD_QPEL 128
#define FF_BUG_QPEL_CHROMA2 256
#define FF_DEBUG_BITSTREAM 4
#define FF_DEBUG_MB_TYPE 8
#define FF_DEBUG_QP 16
+#if FF_API_DEBUG_MV
+/**
+ * @deprecated this option does nothing
+ */
#define FF_DEBUG_MV 32
+#endif
#define FF_DEBUG_DCT_COEFF 0x00000040
#define FF_DEBUG_SKIP 0x00000080
#define FF_DEBUG_STARTCODE 0x00000100
#define FF_DEBUG_ER 0x00000400
#define FF_DEBUG_MMCO 0x00000800
#define FF_DEBUG_BUGS 0x00001000
+#if FF_API_DEBUG_MV
#define FF_DEBUG_VIS_QP 0x00002000
#define FF_DEBUG_VIS_MB_TYPE 0x00004000
+#endif
#define FF_DEBUG_BUFFERS 0x00008000
#define FF_DEBUG_THREADS 0x00010000
+#if FF_API_DEBUG_MV
/**
- * debug
- * - encoding: Set by user.
- * - decoding: Set by user.
+ * @deprecated this option does not have any effect
*/
+ attribute_deprecated
int debug_mv;
#define FF_DEBUG_VIS_MV_P_FOR 0x00000001 //visualize forward predicted MVs of P frames
#define FF_DEBUG_VIS_MV_B_FOR 0x00000002 //visualize forward predicted MVs of B frames
#define FF_DEBUG_VIS_MV_B_BACK 0x00000004 //visualize backward predicted MVs of B frames
+#endif
/**
* Error recognition; may misdetect some more or less valid parts as errors.
* - decoding: Set by user.
*/
int err_recognition;
+
+/**
+ * Verify checksums embedded in the bitstream (could be of either encoded or
+ * decoded data, depending on the codec) and print an error message on mismatch.
+ * If AV_EF_EXPLODE is also set, a mismatching checksum will result in the
+ * decoder returning an error.
+ */
#define AV_EF_CRCCHECK (1<<0)
#define AV_EF_BITSTREAM (1<<1)
#define AV_EF_BUFFER (1<<2)
#define FF_IDCT_INT 1
#define FF_IDCT_SIMPLE 2
#define FF_IDCT_SIMPLEMMX 3
-#if FF_API_LIBMPEG2
-#define FF_IDCT_LIBMPEG2MMX 4
-#endif
-#if FF_API_MMI
-#define FF_IDCT_MMI 5
-#endif
#define FF_IDCT_ARM 7
#define FF_IDCT_ALTIVEC 8
#define FF_IDCT_SH4 9
#define FF_IDCT_SIMPLEARM 10
-#define FF_IDCT_H264 11
-#define FF_IDCT_VP3 12
#define FF_IDCT_IPP 13
#define FF_IDCT_XVIDMMX 14
-#define FF_IDCT_CAVS 15
#define FF_IDCT_SIMPLEARMV5TE 16
#define FF_IDCT_SIMPLEARMV6 17
#define FF_IDCT_SIMPLEVIS 18
-#define FF_IDCT_WMV2 19
#define FF_IDCT_FAAN 20
-#define FF_IDCT_EA 21
#define FF_IDCT_SIMPLENEON 22
+#if FF_API_ARCH_ALPHA
#define FF_IDCT_SIMPLEALPHA 23
-#define FF_IDCT_BINK 24
-
-#if FF_API_DSP_MASK
- /**
- * Unused.
- * @deprecated use av_set_cpu_flags_mask() instead.
- */
- attribute_deprecated unsigned dsp_mask;
#endif
/**
*/
int bits_per_raw_sample;
+#if FF_API_LOWRES
/**
* low resolution decoding, 1-> 1/2 size, 2->1/4 size
* - encoding: unused
* - decoding: Set by user.
+ *
+ * @deprecated use decoder private options instead
*/
attribute_deprecated int lowres;
+#endif
/**
* the picture in the bitstream
* - encoding: Set by libavcodec.
- * - decoding: Set by libavcodec.
+ * - decoding: unused
*/
AVFrame *coded_frame;
*/
int (*execute2)(struct AVCodecContext *c, int (*func)(struct AVCodecContext *c2, void *arg, int jobnr, int threadnr), void *arg2, int *ret, int count);
+#if FF_API_THREAD_OPAQUE
/**
- * thread opaque
- * Can be used by execute() to store some per AVCodecContext stuff.
- * - encoding: set by execute()
- * - decoding: set by execute()
+ * @deprecated this field should not be used from outside of lavc
*/
+ attribute_deprecated
void *thread_opaque;
+#endif
/**
* noise vs. sse weight for the nsse comparsion function
#define FF_PROFILE_AAC_HE_V2 28
#define FF_PROFILE_AAC_LD 22
#define FF_PROFILE_AAC_ELD 38
+#define FF_PROFILE_MPEG2_AAC_LOW 128
+#define FF_PROFILE_MPEG2_AAC_HE 131
#define FF_PROFILE_DTS 20
#define FF_PROFILE_DTS_ES 30
#define FF_PROFILE_MPEG4_SIMPLE_STUDIO 14
#define FF_PROFILE_MPEG4_ADVANCED_SIMPLE 15
+#define FF_PROFILE_JPEG2000_CSTREAM_RESTRICTION_0 0
+#define FF_PROFILE_JPEG2000_CSTREAM_RESTRICTION_1 1
+#define FF_PROFILE_JPEG2000_CSTREAM_NO_RESTRICTION 2
+#define FF_PROFILE_JPEG2000_DCINEMA_2K 3
+#define FF_PROFILE_JPEG2000_DCINEMA_4K 4
+
/**
* level
* - encoding: Set by user.
uint8_t *subtitle_header;
int subtitle_header_size;
+#if FF_API_ERROR_RATE
/**
- * Simulates errors in the bitstream to test error concealment.
- * - encoding: Set by user.
- * - decoding: unused
+ * @deprecated use the 'error_rate' private AVOption of the mpegvideo
+ * encoders
*/
+ attribute_deprecated
int error_rate;
+#endif
+#if FF_API_CODEC_PKT
/**
- * Current packet as passed into the decoder, to avoid having
- * to pass the packet into every function. Currently only valid
- * inside lavc and get/release_buffer callbacks.
- * - decoding: set by avcodec_decode_*, read by get_buffer() for setting pkt_pts
- * - encoding: unused
+ * @deprecated this field is not supposed to be accessed from outside lavc
*/
+ attribute_deprecated
AVPacket *pkt;
+#endif
/**
* VBV delay coded in the last frame (in periods of a 27 MHz clock).
const int *supported_samplerates; ///< array of supported audio samplerates, or NULL if unknown, array is terminated by 0
const enum AVSampleFormat *sample_fmts; ///< array of supported sample formats, or NULL if unknown, array is terminated by -1
const uint64_t *channel_layouts; ///< array of support channel layouts, or NULL if unknown. array is terminated by 0
+#if FF_API_LOWRES
attribute_deprecated uint8_t max_lowres; ///< maximum value for lowres supported by the decoder
+#endif
const AVClass *priv_class; ///< AVClass for the private context
const AVProfile *profiles; ///< array of recognized profiles, or NULL if unknown, array is terminated by {FF_PROFILE_UNKNOWN}
*/
int avcodec_copy_context(AVCodecContext *dest, const AVCodecContext *src);
+#if FF_API_AVFRAME_LAVC
/**
- * Allocate an AVFrame and set its fields to default values. The resulting
- * struct must be freed using avcodec_free_frame().
- *
- * @return An AVFrame filled with default values or NULL on failure.
- * @see avcodec_get_frame_defaults
+ * @deprecated use av_frame_alloc()
*/
+attribute_deprecated
AVFrame *avcodec_alloc_frame(void);
+#endif
/**
* Set the fields of the given AVFrame to default values.
* @{
*/
+#if FF_API_DESTRUCT_PACKET
/**
* Default packet destructor.
+ * @deprecated use the AVBuffer API instead
*/
+attribute_deprecated
void av_destruct_packet(AVPacket *pkt);
+#endif
/**
* Initialize optional fields of a packet with default values.
*/
int av_grow_packet(AVPacket *pkt, int grow_by);
+/**
+ * Initialize a reference-counted packet from av_malloc()ed data.
+ *
+ * @param pkt packet to be initialized. This function will set the data, size,
+ * buf and destruct fields, all others are left untouched.
+ * @param data Data allocated by av_malloc() to be used as packet data. If this
+ * function returns successfully, the data is owned by the underlying AVBuffer.
+ * The caller may not access the data through other means.
+ * @param size size of data in bytes, without the padding. I.e. the full buffer
+ * size is assumed to be size + FF_INPUT_BUFFER_PADDING_SIZE.
+ *
+ * @return 0 on success, a negative AVERROR on error
+ */
+int av_packet_from_data(AVPacket *pkt, uint8_t *data, int size);
+
/**
* @warning This is a hack - the packet memory allocation stuff is broken. The
* packet is allocated if it was not really allocated.
uint8_t* av_packet_get_side_data(AVPacket *pkt, enum AVPacketSideDataType type,
int *size);
+/**
+ * Convenience function to free all the side data stored.
+ * All the other fields stay untouched.
+ *
+ * @param pkt packet
+ */
+void av_packet_free_side_data(AVPacket *pkt);
+
+/**
+ * Setup a new reference to the data described by a given packet
+ *
+ * If src is reference-counted, setup dst as a new reference to the
+ * buffer in src. Otherwise allocate a new buffer in dst and copy the
+ * data from src into it.
+ *
+ * All the other fields are copied from src.
+ *
+ * @see av_packet_unref
+ *
+ * @param dst Destination packet
+ * @param src Source packet
+ *
+ * @return 0 on success, a negative AVERROR on error.
+ */
+int av_packet_ref(AVPacket *dst, AVPacket *src);
+
+/**
+ * Wipe the packet.
+ *
+ * Unreference the buffer referenced by the packet and reset the
+ * remaining packet fields to their default values.
+ *
+ * @param pkt The packet to be unreferenced.
+ */
+void av_packet_unref(AVPacket *pkt);
+
+/**
+ * Move every field in src to dst and reset src.
+ *
+ * @see av_packet_unref
+ *
+ * @param src Source packet, will be reset
+ * @param dst Destination packet
+ */
+void av_packet_move_ref(AVPacket *dst, AVPacket *src);
+
+/**
+ * Copy only "properties" fields from src to dst.
+ *
+ * Properties for the purpose of this function are all the fields
+ * beside those related to the packet data (buf, data, size)
+ *
+ * @param dst Destination packet
+ * @param src Source packet
+ *
+ * @return 0 on success AVERROR on failure.
+ *
+ */
+int av_packet_copy_props(AVPacket *dst, const AVPacket *src);
+
/**
* @}
*/
*/
AVCodec *avcodec_find_decoder_by_name(const char *name);
-int avcodec_default_get_buffer(AVCodecContext *s, AVFrame *pic);
-void avcodec_default_release_buffer(AVCodecContext *s, AVFrame *pic);
-int avcodec_default_reget_buffer(AVCodecContext *s, AVFrame *pic);
+#if FF_API_GET_BUFFER
+attribute_deprecated int avcodec_default_get_buffer(AVCodecContext *s, AVFrame *pic);
+attribute_deprecated void avcodec_default_release_buffer(AVCodecContext *s, AVFrame *pic);
+attribute_deprecated int avcodec_default_reget_buffer(AVCodecContext *s, AVFrame *pic);
+#endif
+
+/**
+ * The default callback for AVCodecContext.get_buffer2(). It is made public so
+ * it can be called by custom get_buffer2() implementations for decoders without
+ * CODEC_CAP_DR1 set.
+ */
+int avcodec_default_get_buffer2(AVCodecContext *s, AVFrame *frame, int flags);
/**
* Return the amount of padding in pixels which the get_buffer callback must
void avcodec_align_dimensions2(AVCodecContext *s, int *width, int *height,
int linesize_align[AV_NUM_DATA_POINTERS]);
-#if FF_API_OLD_DECODE_AUDIO
-/**
- * Wrapper function which calls avcodec_decode_audio4.
- *
- * @deprecated Use avcodec_decode_audio4 instead.
- *
- * Decode the audio frame of size avpkt->size from avpkt->data into samples.
- * Some decoders may support multiple frames in a single AVPacket, such
- * decoders would then just decode the first frame. In this case,
- * avcodec_decode_audio3 has to be called again with an AVPacket that contains
- * the remaining data in order to decode the second frame etc.
- * If no frame
- * could be outputted, frame_size_ptr is zero. Otherwise, it is the
- * decompressed frame size in bytes.
- *
- * @warning You must set frame_size_ptr to the allocated size of the
- * output buffer before calling avcodec_decode_audio3().
- *
- * @warning The input buffer must be FF_INPUT_BUFFER_PADDING_SIZE larger than
- * the actual read bytes because some optimized bitstream readers read 32 or 64
- * bits at once and could read over the end.
- *
- * @warning The end of the input buffer avpkt->data should be set to 0 to ensure that
- * no overreading happens for damaged MPEG streams.
- *
- * @warning You must not provide a custom get_buffer() when using
- * avcodec_decode_audio3(). Doing so will override it with
- * avcodec_default_get_buffer. Use avcodec_decode_audio4() instead,
- * which does allow the application to provide a custom get_buffer().
- *
- * @note You might have to align the input buffer avpkt->data and output buffer
- * samples. The alignment requirements depend on the CPU: On some CPUs it isn't
- * necessary at all, on others it won't work at all if not aligned and on others
- * it will work but it will have an impact on performance.
- *
- * In practice, avpkt->data should have 4 byte alignment at minimum and
- * samples should be 16 byte aligned unless the CPU doesn't need it
- * (AltiVec and SSE do).
- *
- * @note Codecs which have the CODEC_CAP_DELAY capability set have a delay
- * between input and output, these need to be fed with avpkt->data=NULL,
- * avpkt->size=0 at the end to return the remaining frames.
- *
- * @param avctx the codec context
- * @param[out] samples the output buffer, sample type in avctx->sample_fmt
- * If the sample format is planar, each channel plane will
- * be the same size, with no padding between channels.
- * @param[in,out] frame_size_ptr the output buffer size in bytes
- * @param[in] avpkt The input AVPacket containing the input buffer.
- * You can create such packet with av_init_packet() and by then setting
- * data and size, some decoders might in addition need other fields.
- * All decoders are designed to use the least fields possible though.
- * @return On error a negative value is returned, otherwise the number of bytes
- * used or zero if no frame data was decompressed (used) from the input AVPacket.
- */
-attribute_deprecated int avcodec_decode_audio3(AVCodecContext *avctx, int16_t *samples,
- int *frame_size_ptr,
- AVPacket *avpkt);
-#endif
-
/**
* Decode the audio frame of size avpkt->size from avpkt->data into frame.
*
* Some decoders may support multiple frames in a single AVPacket. Such
- * decoders would then just decode the first frame. In this case,
- * avcodec_decode_audio4 has to be called again with an AVPacket containing
- * the remaining data in order to decode the second frame, etc...
- * Even if no frames are returned, the packet needs to be fed to the decoder
- * with remaining data until it is completely consumed or an error occurs.
+ * decoders would then just decode the first frame and the return value would be
+ * less than the packet size. In this case, avcodec_decode_audio4 has to be
+ * called again with an AVPacket containing the remaining data in order to
+ * decode the second frame, etc... Even if no frames are returned, the packet
+ * needs to be fed to the decoder with remaining data until it is completely
+ * consumed or an error occurs.
+ *
+ * Some decoders (those marked with CODEC_CAP_DELAY) have a delay between input
+ * and output. This means that for some packets they will not immediately
+ * produce decoded output and need to be flushed at the end of decoding to get
+ * all the decoded data. Flushing is done by calling this function with packets
+ * with avpkt->data set to NULL and avpkt->size set to 0 until it stops
+ * returning samples. It is safe to flush even those decoders that are not
+ * marked with CODEC_CAP_DELAY, then no samples will be returned.
*
* @warning The input buffer, avpkt->data must be FF_INPUT_BUFFER_PADDING_SIZE
* larger than the actual read bytes because some optimized bitstream
* readers read 32 or 64 bits at once and could read over the end.
*
- * @note You might have to align the input buffer. The alignment requirements
- * depend on the CPU and the decoder.
- *
* @param avctx the codec context
* @param[out] frame The AVFrame in which to store decoded audio samples.
- * Decoders request a buffer of a particular size by setting
- * AVFrame.nb_samples prior to calling get_buffer(). The
- * decoder may, however, only utilize part of the buffer by
- * setting AVFrame.nb_samples to a smaller value in the
- * output frame.
+ * The decoder will allocate a buffer for the decoded frame by
+ * calling the AVCodecContext.get_buffer2() callback.
+ * When AVCodecContext.refcounted_frames is set to 1, the frame is
+ * reference counted and the returned reference belongs to the
+ * caller. The caller must release the frame using av_frame_unref()
+ * when the frame is no longer needed. The caller may safely write
+ * to the frame if av_frame_is_writable() returns 1.
+ * When AVCodecContext.refcounted_frames is set to 0, the returned
+ * reference belongs to the decoder and is valid only until the
+ * next call to this function or until closing or flushing the
+ * decoder. The caller may not write to it.
* @param[out] got_frame_ptr Zero if no frame could be decoded, otherwise it is
- * non-zero.
+ * non-zero. Note that this field being set to zero
+ * does not mean that an error has occurred. For
+ * decoders with CODEC_CAP_DELAY set, no given decode
+ * call is guaranteed to produce a frame.
* @param[in] avpkt The input AVPacket containing the input buffer.
* At least avpkt->data and avpkt->size should be set. Some
* decoders might also require additional fields to be set.
* @warning The end of the input buffer buf should be set to 0 to ensure that
* no overreading happens for damaged MPEG streams.
*
- * @note You might have to align the input buffer avpkt->data.
- * The alignment requirements depend on the CPU: on some CPUs it isn't
- * necessary at all, on others it won't work at all if not aligned and on others
- * it will work but it will have an impact on performance.
- *
- * In practice, avpkt->data should have 4 byte alignment at minimum.
- *
* @note Codecs which have the CODEC_CAP_DELAY capability set have a delay
* between input and output, these need to be fed with avpkt->data=NULL,
* avpkt->size=0 at the end to return the remaining frames.
*
* @param avctx the codec context
* @param[out] picture The AVFrame in which the decoded video frame will be stored.
- * Use avcodec_alloc_frame to get an AVFrame, the codec will
- * allocate memory for the actual bitmap.
- * with default get/release_buffer(), the decoder frees/reuses the bitmap as it sees fit.
- * with overridden get/release_buffer() (needs CODEC_CAP_DR1) the user decides into what buffer the decoder
- * decodes and the decoder tells the user once it does not need the data anymore,
- * the user app can at this point free/reuse/keep the memory as it sees fit.
+ * Use av_frame_alloc() to get an AVFrame. The codec will
+ * allocate memory for the actual bitmap by calling the
+ * AVCodecContext.get_buffer2() callback.
+ * When AVCodecContext.refcounted_frames is set to 1, the frame is
+ * reference counted and the returned reference belongs to the
+ * caller. The caller must release the frame using av_frame_unref()
+ * when the frame is no longer needed. The caller may safely write
+ * to the frame if av_frame_is_writable() returns 1.
+ * When AVCodecContext.refcounted_frames is set to 0, the returned
+ * reference belongs to the decoder and is valid only until the
+ * next call to this function or until closing or flushing the
+ * decoder. The caller may not write to it.
*
* @param[in] avpkt The input AVpacket containing the input buffer.
* You can create such packet with av_init_packet() and by then setting
* @{
*/
+enum AVPictureStructure {
+ AV_PICTURE_STRUCTURE_UNKNOWN, //< unknown
+ AV_PICTURE_STRUCTURE_TOP_FIELD, //< coded as top field
+ AV_PICTURE_STRUCTURE_BOTTOM_FIELD, //< coded as bottom field
+ AV_PICTURE_STRUCTURE_FRAME, //< coded as frame
+};
+
typedef struct AVCodecParserContext {
void *priv_data;
struct AVCodecParser *parser;
* For all other types, this is in units of AVCodecContext.time_base.
*/
int duration;
+
+ enum AVFieldOrder field_order;
+
+ /**
+ * Indicate whether a picture is coded as a frame, top field or bottom field.
+ *
+ * For example, H.264 field_pic_flag equal to 0 corresponds to
+ * AV_PICTURE_STRUCTURE_FRAME. An H.264 picture with field_pic_flag
+ * equal to 1 and bottom_field_flag equal to 0 corresponds to
+ * AV_PICTURE_STRUCTURE_TOP_FIELD.
+ */
+ enum AVPictureStructure picture_structure;
+
+ /**
+ * Picture number incremented in presentation or output order.
+ * This field may be reinitialized at the first picture of a new sequence.
+ *
+ * For example, this corresponds to H.264 PicOrderCnt.
+ */
+ int output_picture_number;
} AVCodecParserContext;
typedef struct AVCodecParser {
*/
AVCodec *avcodec_find_encoder_by_name(const char *name);
-#if FF_API_OLD_ENCODE_AUDIO
-/**
- * Encode an audio frame from samples into buf.
- *
- * @deprecated Use avcodec_encode_audio2 instead.
- *
- * @note The output buffer should be at least FF_MIN_BUFFER_SIZE bytes large.
- * However, for codecs with avctx->frame_size equal to 0 (e.g. PCM) the user
- * will know how much space is needed because it depends on the value passed
- * in buf_size as described below. In that case a lower value can be used.
- *
- * @param avctx the codec context
- * @param[out] buf the output buffer
- * @param[in] buf_size the output buffer size
- * @param[in] samples the input buffer containing the samples
- * The number of samples read from this buffer is frame_size*channels,
- * both of which are defined in avctx.
- * For codecs which have avctx->frame_size equal to 0 (e.g. PCM) the number of
- * samples read from samples is equal to:
- * buf_size * 8 / (avctx->channels * av_get_bits_per_sample(avctx->codec_id))
- * This also implies that av_get_bits_per_sample() must not return 0 for these
- * codecs.
- * @return On error a negative value is returned, on success zero or the number
- * of bytes used to encode the data read from the input buffer.
- */
-int attribute_deprecated avcodec_encode_audio(AVCodecContext *avctx,
- uint8_t *buf, int buf_size,
- const short *samples);
-#endif
-
/**
* Encode a frame of audio.
*
int avcodec_encode_audio2(AVCodecContext *avctx, AVPacket *avpkt,
const AVFrame *frame, int *got_packet_ptr);
-#if FF_API_OLD_ENCODE_VIDEO
-/**
- * @deprecated use avcodec_encode_video2() instead.
- *
- * Encode a video frame from pict into buf.
- * The input picture should be
- * stored using a specific format, namely avctx.pix_fmt.
- *
- * @param avctx the codec context
- * @param[out] buf the output buffer for the bitstream of encoded frame
- * @param[in] buf_size the size of the output buffer in bytes
- * @param[in] pict the input picture to encode
- * @return On error a negative value is returned, on success zero or the number
- * of bytes used from the output buffer.
- */
-attribute_deprecated
-int avcodec_encode_video(AVCodecContext *avctx, uint8_t *buf, int buf_size,
- const AVFrame *pict);
-#endif
-
/**
* Encode a frame of video.
*
* @}
*/
-#if FF_API_AVCODEC_RESAMPLE
-/**
- * @defgroup lavc_resample Audio resampling
- * @ingroup libavc
- * @deprecated use libavresample instead
- *
- * @{
- */
-struct ReSampleContext;
-struct AVResampleContext;
-
-typedef struct ReSampleContext ReSampleContext;
-
-/**
- * Initialize audio resampling context.
- *
- * @param output_channels number of output channels
- * @param input_channels number of input channels
- * @param output_rate output sample rate
- * @param input_rate input sample rate
- * @param sample_fmt_out requested output sample format
- * @param sample_fmt_in input sample format
- * @param filter_length length of each FIR filter in the filterbank relative to the cutoff frequency
- * @param log2_phase_count log2 of the number of entries in the polyphase filterbank
- * @param linear if 1 then the used FIR filter will be linearly interpolated
- between the 2 closest, if 0 the closest will be used
- * @param cutoff cutoff frequency, 1.0 corresponds to half the output sampling rate
- * @return allocated ReSampleContext, NULL if error occurred
- */
-attribute_deprecated
-ReSampleContext *av_audio_resample_init(int output_channels, int input_channels,
- int output_rate, int input_rate,
- enum AVSampleFormat sample_fmt_out,
- enum AVSampleFormat sample_fmt_in,
- int filter_length, int log2_phase_count,
- int linear, double cutoff);
-
-attribute_deprecated
-int audio_resample(ReSampleContext *s, short *output, short *input, int nb_samples);
-
-/**
- * Free resample context.
- *
- * @param s a non-NULL pointer to a resample context previously
- * created with av_audio_resample_init()
- */
-attribute_deprecated
-void audio_resample_close(ReSampleContext *s);
-
-
-/**
- * Initialize an audio resampler.
- * Note, if either rate is not an integer then simply scale both rates up so they are.
- * @param filter_length length of each FIR filter in the filterbank relative to the cutoff freq
- * @param log2_phase_count log2 of the number of entries in the polyphase filterbank
- * @param linear If 1 then the used FIR filter will be linearly interpolated
- between the 2 closest, if 0 the closest will be used
- * @param cutoff cutoff frequency, 1.0 corresponds to half the output sampling rate
- */
-attribute_deprecated
-struct AVResampleContext *av_resample_init(int out_rate, int in_rate, int filter_length, int log2_phase_count, int linear, double cutoff);
-
-/**
- * Resample an array of samples using a previously configured context.
- * @param src an array of unconsumed samples
- * @param consumed the number of samples of src which have been consumed are returned here
- * @param src_size the number of unconsumed samples available
- * @param dst_size the amount of space in samples available in dst
- * @param update_ctx If this is 0 then the context will not be modified, that way several channels can be resampled with the same context.
- * @return the number of samples written in dst or -1 if an error occurred
- */
-attribute_deprecated
-int av_resample(struct AVResampleContext *c, short *dst, short *src, int *consumed, int src_size, int dst_size, int update_ctx);
-
-
-/**
- * Compensate samplerate/timestamp drift. The compensation is done by changing
- * the resampler parameters, so no audible clicks or similar distortions occur
- * @param compensation_distance distance in output samples over which the compensation should be performed
- * @param sample_delta number of output samples which should be output less
- *
- * example: av_resample_compensate(c, 10, 500)
- * here instead of 510 samples only 500 samples would be output
- *
- * note, due to rounding the actual compensation might be slightly different,
- * especially if the compensation_distance is large and the in_rate used during init is small
- */
-attribute_deprecated
-void av_resample_compensate(struct AVResampleContext *c, int sample_delta, int compensation_distance);
-attribute_deprecated
-void av_resample_close(struct AVResampleContext *c);
-
-/**
- * @}
- */
-#endif
-
/**
* @addtogroup lavc_picture
* @{
*/
int avpicture_get_size(enum AVPixelFormat pix_fmt, int width, int height);
+#if FF_API_DEINTERLACE
/**
* deinterlace - if not supported return -1
+ *
+ * @deprecated - use yadif (in libavfilter) instead
*/
+attribute_deprecated
int avpicture_deinterlace(AVPicture *dst, const AVPicture *src,
enum AVPixelFormat pix_fmt, int width, int height);
+#endif
/**
* Copy image src to dst. Wraps av_picture_data_copy() above.
*/
int avcodec_get_pix_fmt_loss(enum AVPixelFormat dst_pix_fmt, enum AVPixelFormat src_pix_fmt,
int has_alpha);
-#if FF_API_FIND_BEST_PIX_FMT
-/**
- * @deprecated use avcodec_find_best_pix_fmt2() instead.
- *
- * Find the best pixel format to convert to given a certain source pixel
- * format. When converting from one pixel format to another, information loss
- * may occur. For example, when converting from RGB24 to GRAY, the color
- * information will be lost. Similarly, other losses occur when converting from
- * some formats to other formats. avcodec_find_best_pix_fmt() searches which of
- * the given pixel formats should be used to suffer the least amount of loss.
- * The pixel formats from which it chooses one, are determined by the
- * pix_fmt_mask parameter.
- *
- * @code
- * src_pix_fmt = AV_PIX_FMT_YUV420P;
- * pix_fmt_mask = (1 << AV_PIX_FMT_YUV422P) || (1 << AV_PIX_FMT_RGB24);
- * dst_pix_fmt = avcodec_find_best_pix_fmt(pix_fmt_mask, src_pix_fmt, alpha, &loss);
- * @endcode
- *
- * @param[in] pix_fmt_mask bitmask determining which pixel format to choose from
- * @param[in] src_pix_fmt source pixel format
- * @param[in] has_alpha Whether the source pixel format alpha channel is used.
- * @param[out] loss_ptr Combination of flags informing you what kind of losses will occur.
- * @return The best pixel format to convert to or -1 if none was found.
- */
-attribute_deprecated
-enum AVPixelFormat avcodec_find_best_pix_fmt(int64_t pix_fmt_mask, enum AVPixelFormat src_pix_fmt,
- int has_alpha, int *loss_ptr);
-#endif /* FF_API_FIND_BEST_PIX_FMT */
-
/**
* Find the best pixel format to convert to given a certain source pixel
* format. When converting from one pixel format to another, information loss
* @}
*/
+#if FF_API_SET_DIMENSIONS
+/**
+ * @deprecated this function is not supposed to be used from outside of lavc
+ */
+attribute_deprecated
void avcodec_set_dimensions(AVCodecContext *s, int width, int height);
+#endif
/**
* Put a string representing the codec tag codec_tag in buf.
int buf_size, int align);
/**
- * Flush buffers, should be called when seeking or when switching to a different stream.
+ * Reset the internal decoder state / flush internal buffers. Should be called
+ * e.g. when seeking or when switching to a different stream.
+ *
+ * @note when refcounted frames are not used (i.e. avctx->refcounted_frames is 0),
+ * this invalidates the frames previously returned from the decoder. When
+ * refcounted frames are used, the decoder just releases any references it might
+ * keep internally, but the caller's reference remains valid.
*/
void avcodec_flush_buffers(AVCodecContext *avctx);
-void avcodec_default_free_buffers(AVCodecContext *s);
-
/**
* Return codec bits per sample.
*
/* memory */
-/**
- * Reallocate the given block if it is not large enough, otherwise do nothing.
- *
- * @see av_realloc
- */
-void *av_fast_realloc(void *ptr, unsigned int *size, size_t min_size);
-
-/**
- * Allocate a buffer, reusing the given one if large enough.
- *
- * Contrary to av_fast_realloc the current buffer contents might not be
- * preserved and on error the old buffer is freed, thus no special
- * handling to avoid memleaks is necessary.
- *
- * @param ptr pointer to pointer to already allocated buffer, overwritten with pointer to new buffer
- * @param size size of the buffer *ptr points to
- * @param min_size minimum size of *ptr buffer after returning, *ptr will be NULL and
- * *size 0 if an error occurred.
- */
-void av_fast_malloc(void *ptr, unsigned int *size, size_t min_size);
-
/**
* Allocate a buffer with padding, reusing the given one if large enough.
*
*/
unsigned int av_xiphlacing(unsigned char *s, unsigned int v);
+#if FF_API_MISSING_SAMPLE
/**
* Log a generic warning message about a missing feature. This function is
* intended to be used internally by Libav (libavcodec, libavformat, etc.)
* If want_sample is non-zero, additional verbage will be added to the log
* message which tells the user how to report samples to the development
* mailing list.
+ * @deprecated Use avpriv_report_missing_feature() instead.
*/
+attribute_deprecated
void av_log_missing_feature(void *avc, const char *feature, int want_sample);
/**
* @param[in] avc a pointer to an arbitrary struct of which the first field is
* a pointer to an AVClass struct
* @param[in] msg string containing an optional message, or NULL if no message
+ * @deprecated Use avpriv_request_sample() instead.
*/
+attribute_deprecated
void av_log_ask_for_sample(void *avc, const char *msg, ...) av_printf_format(2, 3);
+#endif /* FF_API_MISSING_SAMPLE */
/**
* Register the hardware accelerator hwaccel.