#include "libavutil/pixfmt.h"
#include "libavutil/rational.h"
+#include "bsf.h"
+#include "codec.h"
#include "codec_desc.h"
#include "codec_par.h"
#include "codec_id.h"
/* /Fx */
/* codec capabilities */
-/**
- * Decoder can use draw_horiz_band callback.
- */
-#define AV_CODEC_CAP_DRAW_HORIZ_BAND (1 << 0)
-/**
- * Codec uses get_buffer() for allocating buffers and supports custom allocators.
- * If not set, it might not use get_buffer() at all or use operations that
- * assume the buffer was allocated by avcodec_default_get_buffer.
- */
-#define AV_CODEC_CAP_DR1 (1 << 1)
-#define AV_CODEC_CAP_TRUNCATED (1 << 3)
-/**
- * Encoder or decoder requires flushing with NULL input at the end in order to
- * give the complete and correct output.
- *
- * NOTE: If this flag is not set, the codec is guaranteed to never be fed with
- * with NULL data. The user can still send NULL data to the public encode
- * or decode function, but libavcodec will not pass it along to the codec
- * unless this flag is set.
- *
- * Decoders:
- * The decoder has a non-zero delay and needs to be fed with avpkt->data=NULL,
- * avpkt->size=0 at the end to get the delayed data until the decoder no longer
- * returns frames.
- *
- * Encoders:
- * The encoder needs to be fed with NULL data at the end of encoding until the
- * encoder no longer returns data.
- *
- * NOTE: For encoders implementing the AVCodec.encode2() function, setting this
- * flag also means that the encoder must set the pts and duration for
- * each output packet. If this flag is not set, the pts and duration will
- * be determined by libavcodec from the input frame.
- */
-#define AV_CODEC_CAP_DELAY (1 << 5)
-/**
- * Codec can be fed a final frame with a smaller size.
- * This can be used to prevent truncation of the last audio samples.
- */
-#define AV_CODEC_CAP_SMALL_LAST_FRAME (1 << 6)
-
-/**
- * Codec can output multiple frames per AVPacket
- * Normally demuxers return one frame at a time, demuxers which do not do
- * are connected to a parser to split what they return into proper frames.
- * This flag is reserved to the very rare category of codecs which have a
- * bitstream that cannot be split into frames without timeconsuming
- * operations like full decoding. Demuxers carrying such bitstreams thus
- * may return multiple frames in a packet. This has many disadvantages like
- * prohibiting stream copy in many cases thus it should only be considered
- * as a last resort.
- */
-#define AV_CODEC_CAP_SUBFRAMES (1 << 8)
-/**
- * Codec is experimental and is thus avoided in favor of non experimental
- * encoders
- */
-#define AV_CODEC_CAP_EXPERIMENTAL (1 << 9)
-/**
- * Codec should fill in channel configuration and samplerate instead of container
- */
-#define AV_CODEC_CAP_CHANNEL_CONF (1 << 10)
-/**
- * Codec supports frame-level multithreading.
- */
-#define AV_CODEC_CAP_FRAME_THREADS (1 << 12)
-/**
- * Codec supports slice-based (or partition-based) multithreading.
- */
-#define AV_CODEC_CAP_SLICE_THREADS (1 << 13)
-/**
- * Codec supports changed parameters at any point.
- */
-#define AV_CODEC_CAP_PARAM_CHANGE (1 << 14)
-/**
- * Codec supports avctx->thread_count == 0 (auto).
- */
-#define AV_CODEC_CAP_AUTO_THREADS (1 << 15)
-/**
- * Audio encoder supports receiving a different number of samples in each call.
- */
-#define AV_CODEC_CAP_VARIABLE_FRAME_SIZE (1 << 16)
-/**
- * Decoder is not a preferred choice for probing.
- * This indicates that the decoder is not a good choice for probing.
- * It could for example be an expensive to spin up hardware decoder,
- * or it could simply not provide a lot of useful information about
- * the stream.
- * A decoder marked with this flag should only be used as last resort
- * choice for probing.
- */
-#define AV_CODEC_CAP_AVOID_PROBING (1 << 17)
-
-#if FF_API_UNUSED_CODEC_CAPS
-/**
- * Deprecated and unused. Use AVCodecDescriptor.props instead
- */
-#define AV_CODEC_CAP_INTRA_ONLY 0x40000000
-/**
- * Deprecated and unused. Use AVCodecDescriptor.props instead
- */
-#define AV_CODEC_CAP_LOSSLESS 0x80000000
-#endif
-
-/**
- * Codec is backed by a hardware implementation. Typically used to
- * identify a non-hwaccel hardware decoder. For information about hwaccels, use
- * avcodec_get_hw_config() instead.
- */
-#define AV_CODEC_CAP_HARDWARE (1 << 18)
-
-/**
- * Codec is potentially backed by a hardware implementation, but not
- * necessarily. This is used instead of AV_CODEC_CAP_HARDWARE, if the
- * implementation provides some sort of internal fallback.
- */
-#define AV_CODEC_CAP_HYBRID (1 << 19)
-
-/**
- * This codec takes the reordered_opaque field from input AVFrames
- * and returns it in the corresponding field in AVCodecContext after
- * encoding.
- */
-#define AV_CODEC_CAP_ENCODER_REORDERED_OPAQUE (1 << 20)
-
-/**
- * This encoder can be flushed using avcodec_flush_buffers(). If this flag is
- * not set, the encoder must be closed and reopened to ensure that no frames
- * remain pending.
- */
-#define AV_CODEC_CAP_ENCODER_FLUSH (1 << 21)
-
/* Exported side data.
These flags can be passed in AVCodecContext.export_side_data before initialization.
*/
void av_codec_set_chroma_intra_matrix(AVCodecContext *avctx, uint16_t *val);
#endif
-/**
- * AVProfile.
- */
-typedef struct AVProfile {
- int profile;
- const char *name; ///< short name for the profile
-} AVProfile;
-
-enum {
- /**
- * The codec supports this format via the hw_device_ctx interface.
- *
- * When selecting this format, AVCodecContext.hw_device_ctx should
- * have been set to a device of the specified type before calling
- * avcodec_open2().
- */
- AV_CODEC_HW_CONFIG_METHOD_HW_DEVICE_CTX = 0x01,
- /**
- * The codec supports this format via the hw_frames_ctx interface.
- *
- * When selecting this format for a decoder,
- * AVCodecContext.hw_frames_ctx should be set to a suitable frames
- * context inside the get_format() callback. The frames context
- * must have been created on a device of the specified type.
- *
- * When selecting this format for an encoder,
- * AVCodecContext.hw_frames_ctx should be set to the context which
- * will be used for the input frames before calling avcodec_open2().
- */
- AV_CODEC_HW_CONFIG_METHOD_HW_FRAMES_CTX = 0x02,
- /**
- * The codec supports this format by some internal method.
- *
- * This format can be selected without any additional configuration -
- * no device or frames context is required.
- */
- AV_CODEC_HW_CONFIG_METHOD_INTERNAL = 0x04,
- /**
- * The codec supports this format by some ad-hoc method.
- *
- * Additional settings and/or function calls are required. See the
- * codec-specific documentation for details. (Methods requiring
- * this sort of configuration are deprecated and others should be
- * used in preference.)
- */
- AV_CODEC_HW_CONFIG_METHOD_AD_HOC = 0x08,
-};
-
-typedef struct AVCodecHWConfig {
- /**
- * For decoders, a hardware pixel format which that decoder may be
- * able to decode to if suitable hardware is available.
- *
- * For encoders, a pixel format which the encoder may be able to
- * accept. If set to AV_PIX_FMT_NONE, this applies to all pixel
- * formats supported by the codec.
- */
- enum AVPixelFormat pix_fmt;
- /**
- * Bit set of AV_CODEC_HW_CONFIG_METHOD_* flags, describing the possible
- * setup methods which can be used with this configuration.
- */
- int methods;
- /**
- * The device type associated with the configuration.
- *
- * Must be set for AV_CODEC_HW_CONFIG_METHOD_HW_DEVICE_CTX and
- * AV_CODEC_HW_CONFIG_METHOD_HW_FRAMES_CTX, otherwise unused.
- */
- enum AVHWDeviceType device_type;
-} AVCodecHWConfig;
-
-typedef struct AVCodecDefault AVCodecDefault;
-
struct AVSubtitle;
-/**
- * AVCodec.
- */
-typedef struct AVCodec {
- /**
- * Name of the codec implementation.
- * The name is globally unique among encoders and among decoders (but an
- * encoder and a decoder can share the same name).
- * This is the primary way to find a codec from the user perspective.
- */
- const char *name;
- /**
- * Descriptive name for the codec, meant to be more human readable than name.
- * You should use the NULL_IF_CONFIG_SMALL() macro to define it.
- */
- const char *long_name;
- enum AVMediaType type;
- enum AVCodecID id;
- /**
- * Codec capabilities.
- * see AV_CODEC_CAP_*
- */
- int capabilities;
- const AVRational *supported_framerates; ///< array of supported framerates, or NULL if any, array is terminated by {0,0}
- const enum AVPixelFormat *pix_fmts; ///< array of supported pixel formats, or NULL if unknown, array is terminated by -1
- const int *supported_samplerates; ///< array of supported audio samplerates, or NULL if unknown, array is terminated by 0
- const enum AVSampleFormat *sample_fmts; ///< array of supported sample formats, or NULL if unknown, array is terminated by -1
- const uint64_t *channel_layouts; ///< array of support channel layouts, or NULL if unknown. array is terminated by 0
- uint8_t max_lowres; ///< maximum value for lowres supported by the decoder
- const AVClass *priv_class; ///< AVClass for the private context
- const AVProfile *profiles; ///< array of recognized profiles, or NULL if unknown, array is terminated by {FF_PROFILE_UNKNOWN}
-
- /**
- * Group name of the codec implementation.
- * This is a short symbolic name of the wrapper backing this codec. A
- * wrapper uses some kind of external implementation for the codec, such
- * as an external library, or a codec implementation provided by the OS or
- * the hardware.
- * If this field is NULL, this is a builtin, libavcodec native codec.
- * If non-NULL, this will be the suffix in AVCodec.name in most cases
- * (usually AVCodec.name will be of the form "<codec_name>_<wrapper_name>").
- */
- const char *wrapper_name;
-
- /*****************************************************************
- * No fields below this line are part of the public API. They
- * may not be used outside of libavcodec and can be changed and
- * removed at will.
- * New public fields should be added right above.
- *****************************************************************
- */
- int priv_data_size;
- struct AVCodec *next;
- /**
- * @name Frame-level threading support functions
- * @{
- */
- /**
- * Copy necessary context variables from a previous thread context to the current one.
- * If not defined, the next thread will start automatically; otherwise, the codec
- * must call ff_thread_finish_setup().
- *
- * dst and src will (rarely) point to the same context, in which case memcpy should be skipped.
- */
- int (*update_thread_context)(AVCodecContext *dst, const AVCodecContext *src);
- /** @} */
-
- /**
- * Private codec-specific defaults.
- */
- const AVCodecDefault *defaults;
-
- /**
- * Initialize codec static data, called from avcodec_register().
- *
- * This is not intended for time consuming operations as it is
- * run for every codec regardless of that codec being used.
- */
- void (*init_static_data)(struct AVCodec *codec);
-
- int (*init)(AVCodecContext *);
- int (*encode_sub)(AVCodecContext *, uint8_t *buf, int buf_size,
- const struct AVSubtitle *sub);
- /**
- * Encode data to an AVPacket.
- *
- * @param avctx codec context
- * @param avpkt output AVPacket (may contain a user-provided buffer)
- * @param[in] frame AVFrame containing the raw data to be encoded
- * @param[out] got_packet_ptr encoder sets to 0 or 1 to indicate that a
- * non-empty packet was returned in avpkt.
- * @return 0 on success, negative error code on failure
- */
- int (*encode2)(AVCodecContext *avctx, AVPacket *avpkt, const AVFrame *frame,
- int *got_packet_ptr);
- int (*decode)(AVCodecContext *, void *outdata, int *outdata_size, AVPacket *avpkt);
- int (*close)(AVCodecContext *);
- /**
- * Encode API with decoupled packet/frame dataflow. The API is the
- * same as the avcodec_ prefixed APIs (avcodec_send_frame() etc.), except
- * that:
- * - never called if the codec is closed or the wrong type,
- * - if AV_CODEC_CAP_DELAY is not set, drain frames are never sent,
- * - only one drain frame is ever passed down,
- */
- int (*send_frame)(AVCodecContext *avctx, const AVFrame *frame);
- int (*receive_packet)(AVCodecContext *avctx, AVPacket *avpkt);
-
- /**
- * Decode API with decoupled packet/frame dataflow. This function is called
- * to get one output frame. It should call ff_decode_get_packet() to obtain
- * input data.
- */
- int (*receive_frame)(AVCodecContext *avctx, AVFrame *frame);
- /**
- * Flush buffers.
- * Will be called when seeking
- */
- void (*flush)(AVCodecContext *);
- /**
- * Internal codec capabilities.
- * See FF_CODEC_CAP_* in internal.h
- */
- int caps_internal;
-
- /**
- * Decoding only, a comma-separated list of bitstream filters to apply to
- * packets before decoding.
- */
- const char *bsfs;
-
- /**
- * Array of pointers to hardware configurations supported by the codec,
- * or NULL if no hardware supported. The array is terminated by a NULL
- * pointer.
- *
- * The user can only access this field via avcodec_get_hw_config().
- */
- const struct AVCodecHWConfigInternal **hw_configs;
-
- /**
- * List of supported codec_tags, terminated by FF_CODEC_TAGS_END.
- */
- const uint32_t *codec_tags;
-} AVCodec;
-
#if FF_API_CODEC_GET_SET
attribute_deprecated
int av_codec_get_max_lowres(const AVCodec *codec);
struct MpegEncContext;
-/**
- * Retrieve supported hardware configurations for a codec.
- *
- * Values of index from zero to some maximum return the indexed configuration
- * descriptor; all other values return NULL. If the codec does not support
- * any hardware configurations then it will always return NULL.
- */
-const AVCodecHWConfig *avcodec_get_hw_config(const AVCodec *codec, int index);
-
/**
* @defgroup lavc_hwaccel AVHWAccel
*
int64_t pts; ///< Same as packet pts, in AV_TIME_BASE
} AVSubtitle;
-/**
- * Iterate over all registered codecs.
- *
- * @param opaque a pointer where libavcodec will store the iteration state. Must
- * point to NULL to start the iteration.
- *
- * @return the next registered codec or NULL when the iteration is
- * finished
- */
-const AVCodec *av_codec_iterate(void **opaque);
-
#if FF_API_NEXT
/**
* If c is NULL, returns the first registered codec,
* @{
*/
-/**
- * Find a registered decoder with a matching codec ID.
- *
- * @param id AVCodecID of the requested decoder
- * @return A decoder if one was found, NULL otherwise.
- */
-AVCodec *avcodec_find_decoder(enum AVCodecID id);
-
-/**
- * Find a registered decoder with the specified name.
- *
- * @param name name of the requested decoder
- * @return A decoder if one was found, NULL otherwise.
- */
-AVCodec *avcodec_find_decoder_by_name(const char *name);
-
/**
* The default callback for AVCodecContext.get_buffer2(). It is made public so
* it can be called by custom get_buffer2() implementations for decoders without
* @{
*/
-/**
- * Find a registered encoder with a matching codec ID.
- *
- * @param id AVCodecID of the requested encoder
- * @return An encoder if one was found, NULL otherwise.
- */
-AVCodec *avcodec_find_encoder(enum AVCodecID id);
-
-/**
- * Find a registered encoder with the specified name.
- *
- * @param name name of the requested encoder
- * @return An encoder if one was found, NULL otherwise.
- */
-AVCodec *avcodec_find_encoder_by_name(const char *name);
-
/**
* Encode a frame of audio.
*
*/
char *args;
} AVBitStreamFilterContext;
-#endif
-
-typedef struct AVBSFInternal AVBSFInternal;
-
-/**
- * The bitstream filter state.
- *
- * This struct must be allocated with av_bsf_alloc() and freed with
- * av_bsf_free().
- *
- * The fields in the struct will only be changed (by the caller or by the
- * filter) as described in their documentation, and are to be considered
- * immutable otherwise.
- */
-typedef struct AVBSFContext {
- /**
- * A class for logging and AVOptions
- */
- const AVClass *av_class;
-
- /**
- * The bitstream filter this context is an instance of.
- */
- const struct AVBitStreamFilter *filter;
-
- /**
- * Opaque libavcodec internal data. Must not be touched by the caller in any
- * way.
- */
- AVBSFInternal *internal;
-
- /**
- * Opaque filter-specific private data. If filter->priv_class is non-NULL,
- * this is an AVOptions-enabled struct.
- */
- void *priv_data;
-
- /**
- * Parameters of the input stream. This field is allocated in
- * av_bsf_alloc(), it needs to be filled by the caller before
- * av_bsf_init().
- */
- AVCodecParameters *par_in;
- /**
- * Parameters of the output stream. This field is allocated in
- * av_bsf_alloc(), it is set by the filter in av_bsf_init().
- */
- AVCodecParameters *par_out;
-
- /**
- * The timebase used for the timestamps of the input packets. Set by the
- * caller before av_bsf_init().
- */
- AVRational time_base_in;
-
- /**
- * The timebase used for the timestamps of the output packets. Set by the
- * filter in av_bsf_init().
- */
- AVRational time_base_out;
-} AVBSFContext;
-
-typedef struct AVBitStreamFilter {
- const char *name;
-
- /**
- * A list of codec ids supported by the filter, terminated by
- * AV_CODEC_ID_NONE.
- * May be NULL, in that case the bitstream filter works with any codec id.
- */
- const enum AVCodecID *codec_ids;
-
- /**
- * A class for the private data, used to declare bitstream filter private
- * AVOptions. This field is NULL for bitstream filters that do not declare
- * any options.
- *
- * If this field is non-NULL, the first member of the filter private data
- * must be a pointer to AVClass, which will be set by libavcodec generic
- * code to this class.
- */
- const AVClass *priv_class;
-
- /*****************************************************************
- * No fields below this line are part of the public API. They
- * may not be used outside of libavcodec and can be changed and
- * removed at will.
- * New public fields should be added right above.
- *****************************************************************
- */
-
- int priv_data_size;
- int (*init)(AVBSFContext *ctx);
- int (*filter)(AVBSFContext *ctx, AVPacket *pkt);
- void (*close)(AVBSFContext *ctx);
- void (*flush)(AVBSFContext *ctx);
-} AVBitStreamFilter;
-
-#if FF_API_OLD_BSF
/**
* @deprecated the old bitstream filtering API (using AVBitStreamFilterContext)
* is deprecated. Use the new bitstream filtering API (using AVBSFContext).
const AVBitStreamFilter *av_bitstream_filter_next(const AVBitStreamFilter *f);
#endif
-/**
- * @return a bitstream filter with the specified name or NULL if no such
- * bitstream filter exists.
- */
-const AVBitStreamFilter *av_bsf_get_by_name(const char *name);
-
-/**
- * Iterate over all registered bitstream filters.
- *
- * @param opaque a pointer where libavcodec will store the iteration state. Must
- * point to NULL to start the iteration.
- *
- * @return the next registered bitstream filter or NULL when the iteration is
- * finished
- */
-const AVBitStreamFilter *av_bsf_iterate(void **opaque);
#if FF_API_NEXT
attribute_deprecated
const AVBitStreamFilter *av_bsf_next(void **opaque);
#endif
-/**
- * Allocate a context for a given bitstream filter. The caller must fill in the
- * context parameters as described in the documentation and then call
- * av_bsf_init() before sending any data to the filter.
- *
- * @param filter the filter for which to allocate an instance.
- * @param ctx a pointer into which the pointer to the newly-allocated context
- * will be written. It must be freed with av_bsf_free() after the
- * filtering is done.
- *
- * @return 0 on success, a negative AVERROR code on failure
- */
-int av_bsf_alloc(const AVBitStreamFilter *filter, AVBSFContext **ctx);
-
-/**
- * Prepare the filter for use, after all the parameters and options have been
- * set.
- */
-int av_bsf_init(AVBSFContext *ctx);
-
-/**
- * Submit a packet for filtering.
- *
- * After sending each packet, the filter must be completely drained by calling
- * av_bsf_receive_packet() repeatedly until it returns AVERROR(EAGAIN) or
- * AVERROR_EOF.
- *
- * @param pkt the packet to filter. The bitstream filter will take ownership of
- * the packet and reset the contents of pkt. pkt is not touched if an error occurs.
- * If pkt is empty (i.e. NULL, or pkt->data is NULL and pkt->side_data_elems zero),
- * it signals the end of the stream (i.e. no more non-empty packets will be sent;
- * sending more empty packets does nothing) and will cause the filter to output
- * any packets it may have buffered internally.
- *
- * @return 0 on success, a negative AVERROR on error. This function never fails if
- * pkt is empty.
- */
-int av_bsf_send_packet(AVBSFContext *ctx, AVPacket *pkt);
-
-/**
- * Retrieve a filtered packet.
- *
- * @param[out] pkt this struct will be filled with the contents of the filtered
- * packet. It is owned by the caller and must be freed using
- * av_packet_unref() when it is no longer needed.
- * This parameter should be "clean" (i.e. freshly allocated
- * with av_packet_alloc() or unreffed with av_packet_unref())
- * when this function is called. If this function returns
- * successfully, the contents of pkt will be completely
- * overwritten by the returned data. On failure, pkt is not
- * touched.
- *
- * @return 0 on success. AVERROR(EAGAIN) if more packets need to be sent to the
- * filter (using av_bsf_send_packet()) to get more output. AVERROR_EOF if there
- * will be no further output from the filter. Another negative AVERROR value if
- * an error occurs.
- *
- * @note one input packet may result in several output packets, so after sending
- * a packet with av_bsf_send_packet(), this function needs to be called
- * repeatedly until it stops returning 0. It is also possible for a filter to
- * output fewer packets than were sent to it, so this function may return
- * AVERROR(EAGAIN) immediately after a successful av_bsf_send_packet() call.
- */
-int av_bsf_receive_packet(AVBSFContext *ctx, AVPacket *pkt);
-
-/**
- * Reset the internal bitstream filter state / flush internal buffers.
- */
-void av_bsf_flush(AVBSFContext *ctx);
-
-/**
- * Free a bitstream filter context and everything associated with it; write NULL
- * into the supplied pointer.
- */
-void av_bsf_free(AVBSFContext **ctx);
-
-/**
- * Get the AVClass for AVBSFContext. It can be used in combination with
- * AV_OPT_SEARCH_FAKE_OBJ for examining options.
- *
- * @see av_opt_find().
- */
-const AVClass *av_bsf_get_class(void);
-
-/**
- * Structure for chain/list of bitstream filters.
- * Empty list can be allocated by av_bsf_list_alloc().
- */
-typedef struct AVBSFList AVBSFList;
-
-/**
- * Allocate empty list of bitstream filters.
- * The list must be later freed by av_bsf_list_free()
- * or finalized by av_bsf_list_finalize().
- *
- * @return Pointer to @ref AVBSFList on success, NULL in case of failure
- */
-AVBSFList *av_bsf_list_alloc(void);
-
-/**
- * Free list of bitstream filters.
- *
- * @param lst Pointer to pointer returned by av_bsf_list_alloc()
- */
-void av_bsf_list_free(AVBSFList **lst);
-
-/**
- * Append bitstream filter to the list of bitstream filters.
- *
- * @param lst List to append to
- * @param bsf Filter context to be appended
- *
- * @return >=0 on success, negative AVERROR in case of failure
- */
-int av_bsf_list_append(AVBSFList *lst, AVBSFContext *bsf);
-
-/**
- * Construct new bitstream filter context given it's name and options
- * and append it to the list of bitstream filters.
- *
- * @param lst List to append to
- * @param bsf_name Name of the bitstream filter
- * @param options Options for the bitstream filter, can be set to NULL
- *
- * @return >=0 on success, negative AVERROR in case of failure
- */
-int av_bsf_list_append2(AVBSFList *lst, const char * bsf_name, AVDictionary **options);
-/**
- * Finalize list of bitstream filters.
- *
- * This function will transform @ref AVBSFList to single @ref AVBSFContext,
- * so the whole chain of bitstream filters can be treated as single filter
- * freshly allocated by av_bsf_alloc().
- * If the call is successful, @ref AVBSFList structure is freed and lst
- * will be set to NULL. In case of failure, caller is responsible for
- * freeing the structure by av_bsf_list_free()
- *
- * @param lst Filter list structure to be transformed
- * @param[out] bsf Pointer to be set to newly created @ref AVBSFContext structure
- * representing the chain of bitstream filters
- *
- * @return >=0 on success, negative AVERROR in case of failure
- */
-int av_bsf_list_finalize(AVBSFList **lst, AVBSFContext **bsf);
-
-/**
- * Parse string describing list of bitstream filters and create single
- * @ref AVBSFContext describing the whole chain of bitstream filters.
- * Resulting @ref AVBSFContext can be treated as any other @ref AVBSFContext freshly
- * allocated by av_bsf_alloc().
- *
- * @param str String describing chain of bitstream filters in format
- * `bsf1[=opt1=val1:opt2=val2][,bsf2]`
- * @param[out] bsf Pointer to be set to newly created @ref AVBSFContext structure
- * representing the chain of bitstream filters
- *
- * @return >=0 on success, negative AVERROR in case of failure
- */
-int av_bsf_list_parse_str(const char *str, AVBSFContext **bsf);
-
-/**
- * Get null/pass-through bitstream filter.
- *
- * @param[out] bsf Pointer to be set to new instance of pass-through bitstream filter
- *
- * @return
- */
-int av_bsf_get_null_filter(AVBSFContext **bsf);
-
/* memory */
/**
*/
int avcodec_is_open(AVCodecContext *s);
-/**
- * @return a non-zero number if codec is an encoder, zero otherwise
- */
-int av_codec_is_encoder(const AVCodec *codec);
-
-/**
- * @return a non-zero number if codec is a decoder, zero otherwise
- */
-int av_codec_is_decoder(const AVCodec *codec);
-
/**
* Allocate a CPB properties structure and initialize its fields to default
* values.
projects / ffmpeg / blobdiff