AV_CODEC_ID_SGIRLE,
AV_CODEC_ID_MVC1,
AV_CODEC_ID_MVC2,
+ AV_CODEC_ID_HQX,
+ AV_CODEC_ID_TDSC,
+ AV_CODEC_ID_HQ_HQA,
+ AV_CODEC_ID_HAP,
+ AV_CODEC_ID_DDS,
+ AV_CODEC_ID_DXV,
+ AV_CODEC_ID_SCREENPRESSO,
+ AV_CODEC_ID_RSCC,
/* various PCM "codecs" */
AV_CODEC_ID_FIRST_AUDIO = 0x10000, ///< A dummy id pointing at the start of audio codecs
AV_CODEC_ID_PCM_S8_PLANAR,
AV_CODEC_ID_PCM_S24LE_PLANAR,
AV_CODEC_ID_PCM_S32LE_PLANAR,
+ AV_CODEC_ID_PCM_S16BE_PLANAR,
/* various ADPCM codecs */
AV_CODEC_ID_ADPCM_IMA_QT = 0x11000,
AV_CODEC_ID_METASOUND,
AV_CODEC_ID_PAF_AUDIO,
AV_CODEC_ID_ON2AVC,
+ AV_CODEC_ID_DSS_SP,
/* subtitle codecs */
AV_CODEC_ID_FIRST_SUBTITLE = 0x17000, ///< A dummy ID pointing at the start of subtitle codecs.
AV_CODEC_ID_MPEG4SYSTEMS = 0x20001, /**< _FAKE_ codec to indicate a MPEG-4 Systems
* stream (only used by libavformat) */
AV_CODEC_ID_FFMETADATA = 0x21000, ///< Dummy codec for streams containing only metadata information.
+ AV_CODEC_ID_WRAPPED_AVFRAME = 0x21001, ///< Passthrough codec, AVFrames wrapped in AVPacket
};
/**
* Note: If the first 23 bits of the additional bytes are not 0, then damaged
* MPEG bitstreams could cause overread and segfault.
*/
-#define FF_INPUT_BUFFER_PADDING_SIZE 8
+#define AV_INPUT_BUFFER_PADDING_SIZE 8
/**
* @ingroup lavc_encoding
* minimum encoding buffer size
* Used to avoid some checks during header writing.
*/
-#define FF_MIN_BUFFER_SIZE 16384
+#define AV_INPUT_BUFFER_MIN_SIZE 16384
+#if FF_API_WITHOUT_PREFIX
+/**
+ * @deprecated use AV_INPUT_BUFFER_PADDING_SIZE instead
+ */
+#define FF_INPUT_BUFFER_PADDING_SIZE 8
+
+/**
+ * @deprecated use AV_INPUT_BUFFER_MIN_SIZE instead
+ */
+#define FF_MIN_BUFFER_SIZE 16384
+#endif /* FF_API_WITHOUT_PREFIX */
/**
* @ingroup lavc_encoding
* motion estimation type.
+ * @deprecated use codec private option instead
*/
+#if FF_API_MOTION_EST
enum Motion_Est_ID {
ME_ZERO = 1, ///< no search, that is use 0,0 vector whenever one is needed
ME_FULL,
ME_UMH, ///< uneven multi-hexagon search
ME_TESA, ///< transformed exhaustive search algorithm
};
+#endif
/**
* @ingroup lavc_decoding
Note: Not everything is supported yet.
*/
+/**
+ * Allow decoders to produce frames with data planes that are not aligned
+ * to CPU requirements (e.g. due to cropping).
+ */
+#define AV_CODEC_FLAG_UNALIGNED (1 << 0)
+/**
+ * Use fixed qscale.
+ */
+#define AV_CODEC_FLAG_QSCALE (1 << 1)
+/**
+ * 4 MV per MB allowed / advanced prediction for H.263.
+ */
+#define AV_CODEC_FLAG_4MV (1 << 2)
+/**
+ * Output even those frames that might be corrupted.
+ */
+#define AV_CODEC_FLAG_OUTPUT_CORRUPT (1 << 3)
+/**
+ * Use qpel MC.
+ */
+#define AV_CODEC_FLAG_QPEL (1 << 4)
+/**
+ * Use internal 2pass ratecontrol in first pass mode.
+ */
+#define AV_CODEC_FLAG_PASS1 (1 << 9)
+/**
+ * Use internal 2pass ratecontrol in second pass mode.
+ */
+#define AV_CODEC_FLAG_PASS2 (1 << 10)
+/**
+ * loop filter.
+ */
+#define AV_CODEC_FLAG_LOOP_FILTER (1 << 11)
+/**
+ * Only decode/encode grayscale.
+ */
+#define AV_CODEC_FLAG_GRAY (1 << 13)
+/**
+ * error[?] variables will be set during encoding.
+ */
+#define AV_CODEC_FLAG_PSNR (1 << 15)
+/**
+ * Input bitstream might be truncated at a random location
+ * instead of only at frame boundaries.
+ */
+#define AV_CODEC_FLAG_TRUNCATED (1 << 16)
+/**
+ * Use interlaced DCT.
+ */
+#define AV_CODEC_FLAG_INTERLACED_DCT (1 << 18)
+/**
+ * Force low delay.
+ */
+#define AV_CODEC_FLAG_LOW_DELAY (1 << 19)
+/**
+ * Place global headers in extradata instead of every keyframe.
+ */
+#define AV_CODEC_FLAG_GLOBAL_HEADER (1 << 22)
+/**
+ * Use only bitexact stuff (except (I)DCT).
+ */
+#define AV_CODEC_FLAG_BITEXACT (1 << 23)
+/* Fx : Flag for h263+ extra options */
+/**
+ * H.263 advanced intra coding / MPEG-4 AC prediction
+ */
+#define AV_CODEC_FLAG_AC_PRED (1 << 24)
+/**
+ * interlaced motion estimation
+ */
+#define AV_CODEC_FLAG_INTERLACED_ME (1 << 29)
+#define AV_CODEC_FLAG_CLOSED_GOP (1 << 31)
+
+/**
+ * Allow non spec compliant speedup tricks.
+ */
+#define AV_CODEC_FLAG2_FAST (1 << 0)
+/**
+ * Skip bitstream encoding.
+ */
+#define AV_CODEC_FLAG2_NO_OUTPUT (1 << 2)
+/**
+ * Place global headers at every keyframe instead of in extradata.
+ */
+#define AV_CODEC_FLAG2_LOCAL_HEADER (1 << 3)
+/**
+ * Input bitstream might be truncated at a packet boundaries
+ * instead of only at frame boundaries.
+ */
+#define AV_CODEC_FLAG2_CHUNKS (1 << 15)
+/**
+ * Discard cropping information from SPS.
+ */
+#define AV_CODEC_FLAG2_IGNORE_CROP (1 << 16)
+
+/* Unsupported options :
+ * Syntax Arithmetic coding (SAC)
+ * Reference Picture Selection
+ * Independent Segment Decoding */
+/* /Fx */
+/* codec capabilities */
+
+/**
+ * Decoder can use draw_horiz_band callback.
+ */
+#define AV_CODEC_CAP_DRAW_HORIZ_BAND (1 << 0)
+/**
+ * Codec uses get_buffer() for allocating buffers and supports custom allocators.
+ * If not set, it might not use get_buffer() at all or use operations that
+ * assume the buffer was allocated by avcodec_default_get_buffer.
+ */
+#define AV_CODEC_CAP_DR1 (1 << 1)
+#define AV_CODEC_CAP_TRUNCATED (1 << 3)
+/**
+ * Encoder or decoder requires flushing with NULL input at the end in order to
+ * give the complete and correct output.
+ *
+ * NOTE: If this flag is not set, the codec is guaranteed to never be fed with
+ * with NULL data. The user can still send NULL data to the public encode
+ * or decode function, but libavcodec will not pass it along to the codec
+ * unless this flag is set.
+ *
+ * Decoders:
+ * The decoder has a non-zero delay and needs to be fed with avpkt->data=NULL,
+ * avpkt->size=0 at the end to get the delayed data until the decoder no longer
+ * returns frames.
+ *
+ * Encoders:
+ * The encoder needs to be fed with NULL data at the end of encoding until the
+ * encoder no longer returns data.
+ *
+ * NOTE: For encoders implementing the AVCodec.encode2() function, setting this
+ * flag also means that the encoder must set the pts and duration for
+ * each output packet. If this flag is not set, the pts and duration will
+ * be determined by libavcodec from the input frame.
+ */
+#define AV_CODEC_CAP_DELAY (1 << 5)
+/**
+ * Codec can be fed a final frame with a smaller size.
+ * This can be used to prevent truncation of the last audio samples.
+ */
+#define AV_CODEC_CAP_SMALL_LAST_FRAME (1 << 6)
+/**
+ * Codec can output multiple frames per AVPacket
+ * Normally demuxers return one frame at a time, demuxers which do not do
+ * are connected to a parser to split what they return into proper frames.
+ * This flag is reserved to the very rare category of codecs which have a
+ * bitstream that cannot be split into frames without timeconsuming
+ * operations like full decoding. Demuxers carring such bitstreams thus
+ * may return multiple frames in a packet. This has many disadvantages like
+ * prohibiting stream copy in many cases thus it should only be considered
+ * as a last resort.
+ */
+#define AV_CODEC_CAP_SUBFRAMES (1 << 8)
+/**
+ * Codec is experimental and is thus avoided in favor of non experimental
+ * encoders
+ */
+#define AV_CODEC_CAP_EXPERIMENTAL (1 << 9)
+/**
+ * Codec should fill in channel configuration and samplerate instead of container
+ */
+#define AV_CODEC_CAP_CHANNEL_CONF (1 << 10)
+/**
+ * Codec supports frame-level multithreading.
+ */
+#define AV_CODEC_CAP_FRAME_THREADS (1 << 12)
+/**
+ * Codec supports slice-based (or partition-based) multithreading.
+ */
+#define AV_CODEC_CAP_SLICE_THREADS (1 << 13)
+/**
+ * Codec supports changed parameters at any point.
+ */
+#define AV_CODEC_CAP_PARAM_CHANGE (1 << 14)
+/**
+ * Codec supports avctx->thread_count == 0 (auto).
+ */
+#define AV_CODEC_CAP_AUTO_THREADS (1 << 15)
+/**
+ * Audio encoder supports receiving a different number of samples in each call.
+ */
+#define AV_CODEC_CAP_VARIABLE_FRAME_SIZE (1 << 16)
+
+#if FF_API_WITHOUT_PREFIX
/**
* Allow decoders to produce frames with data planes that are not aligned
* to CPU requirements (e.g. due to cropping).
* Audio encoder supports receiving a different number of samples in each call.
*/
#define CODEC_CAP_VARIABLE_FRAME_SIZE 0x10000
+#endif /* FF_API_WITHOUT_PREFIX */
#if FF_API_MB_TYPE
//The following defines may change, don't expect compatibility if you use them.
int16_t position[3][2];
}AVPanScan;
+/**
+ * This structure describes the bitrate properties of an encoded bitstream. It
+ * roughly corresponds to a subset the VBV parameters for MPEG-2 or HRD
+ * parameters for H.264/HEVC.
+ */
+typedef struct AVCPBProperties {
+ /**
+ * Maximum bitrate of the stream, in bits per second.
+ * Zero if unknown or unspecified.
+ */
+ int max_bitrate;
+ /**
+ * Minimum bitrate of the stream, in bits per second.
+ * Zero if unknown or unspecified.
+ */
+ int min_bitrate;
+ /**
+ * Average bitrate of the stream, in bits per second.
+ * Zero if unknown or unspecified.
+ */
+ int avg_bitrate;
+
+ /**
+ * The size of the buffer to which the ratecontrol is applied, in bits.
+ * Zero if unknown or unspecified.
+ */
+ int buffer_size;
+
+ /**
+ * The delay between the time the packet this structure is associated with
+ * is received and the time when it should be decoded, in periods of a 27MHz
+ * clock.
+ *
+ * UINT64_MAX when unknown or unspecified.
+ */
+ uint64_t vbv_delay;
+} AVCPBProperties;
+
#if FF_API_QSCALE_TYPE
#define FF_QSCALE_TYPE_MPEG1 0
#define FF_QSCALE_TYPE_MPEG2 1
#define FF_QSCALE_TYPE_VP56 3
#endif
-#if FF_API_GET_BUFFER
-#define FF_BUFFER_TYPE_INTERNAL 1
-#define FF_BUFFER_TYPE_USER 2 ///< direct rendering buffers (image is (de)allocated by user)
-#define FF_BUFFER_TYPE_SHARED 4 ///< Buffer from somewhere else; don't deallocate image (data/base), all other tables are not shared.
-#define FF_BUFFER_TYPE_COPY 8 ///< Just a (modified) copy of some other buffer, don't deallocate anything.
-
-#define FF_BUFFER_HINTS_VALID 0x01 // Buffer hints value is meaningful (if 0 ignore).
-#define FF_BUFFER_HINTS_READABLE 0x02 // Codec will read from buffer.
-#define FF_BUFFER_HINTS_PRESERVE 0x04 // User must not alter buffer content.
-#define FF_BUFFER_HINTS_REUSABLE 0x08 // Codec will reuse the buffer (update).
-#endif
-
/**
* The decoder will keep a reference to the frame and may reuse it later.
*/
* Stereoscopic 3D information in form of the AVStereo3D struct.
*/
AV_PKT_DATA_STEREO3D,
+
+ /**
+ * This side data should be associated with an audio stream and corresponds
+ * to enum AVAudioServiceType.
+ */
+ AV_PKT_DATA_AUDIO_SERVICE_TYPE,
+
+ /**
+ * This side data contains an integer value representing the quality
+ * factor of the compressed frame. Allowed range is between 1 (good)
+ * and FF_LAMBDA_MAX (bad).
+ */
+ AV_PKT_DATA_QUALITY_FACTOR,
+
+ /**
+ * This side data contains an integer value representing the stream index
+ * of a "fallback" track. A fallback track indicates an alternate
+ * track to use when the current track can not be decoded for some reason.
+ * e.g. no decoder available for codec.
+ */
+ AV_PKT_DATA_FALLBACK_TRACK,
+
+ /**
+ * This side data corresponds to the AVCPBProperties struct.
+ */
+ AV_PKT_DATA_CPB_PROPERTIES,
};
typedef struct AVPacketSideData {
* then passed to muxers.
*
* For video, it should typically contain one compressed frame. For audio it may
- * contain several compressed frames.
+ * contain several compressed frames. Encoders are allowed to output empty
+ * packets, with no compressed data, containing only side data
+ * (e.g. to update some stream parameters at the end of encoding).
*
* AVPacket is one of the few structs in Libav, whose size is a part of public
* ABI. Thus it may be allocated on stack and no new fields can be added to it
* without libavcodec and libavformat major bump.
*
- * The semantics of data ownership depends on the buf or destruct (deprecated)
- * fields. If either is set, the packet data is dynamically allocated and is
- * valid indefinitely until av_free_packet() is called (which in turn calls
- * av_buffer_unref()/the destruct callback to free the data). If neither is set,
- * the packet data is typically backed by some static buffer somewhere and is
- * only valid for a limited time (e.g. until the next read call when demuxing).
+ * The semantics of data ownership depends on the buf field.
+ * If it is set, the packet data is dynamically allocated and is
+ * valid indefinitely until a call to av_packet_unref() reduces the
+ * reference count to 0.
+ *
+ * If the buf field is not set av_packet_ref() would make a copy instead
+ * of increasing the reference count.
+ *
+ * The side data is always allocated with av_malloc(), copied by
+ * av_packet_ref() and freed by av_packet_unref().
*
- * The side data is always allocated with av_malloc() and is freed in
- * av_free_packet().
+ * @see av_packet_ref
+ * @see av_packet_unref
*/
typedef struct AVPacket {
/**
* Duration of this packet in AVStream->time_base units, 0 if unknown.
* Equals next_pts - this_pts in presentation order.
*/
- int duration;
-#if FF_API_DESTRUCT_PACKET
- attribute_deprecated
- void (*destruct)(struct AVPacket *);
- attribute_deprecated
- void *priv;
-#endif
+ int64_t duration;
+
int64_t pos; ///< byte position in stream, -1 if unknown
+#if FF_API_CONVERGENCE_DURATION
/**
- * Time difference in AVStream->time_base units from the pts of this
- * packet to the point at which the output from the decoder has converged
- * independent from the availability of previous frames. That is, the
- * frames are virtually identical no matter if decoding started from
- * the very first frame or from this keyframe.
- * Is AV_NOPTS_VALUE if unknown.
- * This field is not the display duration of the current packet.
- * This field has no meaning if the packet does not have AV_PKT_FLAG_KEY
- * set.
- *
- * The purpose of this field is to allow seeking in streams that have no
- * keyframes in the conventional sense. It corresponds to the
- * recovery point SEI in H.264 and match_time_delta in NUT. It is also
- * essential for some types of subtitle streams to ensure that all
- * subtitles are correctly displayed after seeking.
+ * @deprecated Same as the duration field, but as int64_t. This was required
+ * for Matroska subtitles, whose duration values could overflow when the
+ * duration field was still an int.
*/
+ attribute_deprecated
int64_t convergence_duration;
+#endif
} AVPacket;
#define AV_PKT_FLAG_KEY 0x0001 ///< The packet contains a keyframe
#define AV_PKT_FLAG_CORRUPT 0x0002 ///< The packet content is corrupted
*/
unsigned int codec_tag;
+#if FF_API_STREAM_CODEC_TAG
/**
- * fourcc from the AVI stream header (LSB first, so "ABCD" -> ('D'<<24) + ('C'<<16) + ('B'<<8) + 'A').
- * This is used to work around some encoder bugs.
- * - encoding: unused
- * - decoding: Set by user, will be converted to uppercase by libavcodec during init.
+ * @deprecated this field is unused
*/
+ attribute_deprecated
unsigned int stream_codec_tag;
+#endif
void *priv_data;
#define FF_COMPRESSION_DEFAULT -1
/**
- * CODEC_FLAG_*.
+ * AV_CODEC_FLAG_*.
* - encoding: Set by user.
* - decoding: Set by user.
*/
int flags;
/**
- * CODEC_FLAG2_*
+ * AV_CODEC_FLAG2_*
* - encoding: Set by user.
* - decoding: Set by user.
*/
* mjpeg: Huffman tables
* rv10: additional flags
* mpeg4: global headers (they can be in the bitstream or here)
- * The allocated memory should be FF_INPUT_BUFFER_PADDING_SIZE bytes larger
+ * The allocated memory should be AV_INPUT_BUFFER_PADDING_SIZE bytes larger
* than extradata_size to avoid prolems if it is read with the bitstream reader.
* The bytewise contents of extradata must not depend on the architecture or CPU endianness.
* - encoding: Set/allocated/freed by libavcodec.
* timebase should be 1/framerate and timestamp increments should be
* identically 1.
* - encoding: MUST be set by user.
- * - decoding: Set by libavcodec.
+ * - decoding: the use of this field for decoding is deprecated.
+ * Use framerate instead.
*/
AVRational time_base;
/* video only */
/**
* picture width / height.
+ *
+ * @note Those fields may not match the values of the last
+ * AVFrame outputted by avcodec_decode_video2 due frame
+ * reordering.
+ *
* - encoding: MUST be set by user.
* - decoding: May be set by the user before opening the decoder if known e.g.
* from the container. Some decoders will require the dimensions
* to be set by the caller. During decoding, the decoder may
- * overwrite those values as required.
+ * overwrite those values as required while parsing the data.
*/
int width, height;
/**
* Bitstream width / height, may be different from width/height e.g. when
* the decoded frame is cropped before being output.
+ *
+ * @note Those field may not match the value of the last
+ * AVFrame outputted by avcodec_decode_video2 due frame
+ * reordering.
+ *
* - encoding: unused
* - decoding: May be set by the user before opening the decoder if known
* e.g. from the container. During decoding, the decoder may
- * overwrite those values as required.
+ * overwrite those values as required while parsing the data.
*/
int coded_width, coded_height;
* Pixel format, see AV_PIX_FMT_xxx.
* May be set by the demuxer if known from headers.
* May be overriden by the decoder if it knows better.
+ *
+ * @note This field may not match the value of the last
+ * AVFrame outputted by avcodec_decode_video2 due frame
+ * reordering.
+ *
* - encoding: Set by user.
- * - decoding: Set by user if known, overridden by libavcodec if known
+ * - decoding: Set by user if known, overridden by libavcodec while
+ * parsing the data.
*/
enum AVPixelFormat pix_fmt;
+#if FF_API_MOTION_EST
/**
- * Motion estimation algorithm used for video coding.
- * 1 (zero), 2 (full), 3 (log), 4 (phods), 5 (epzs), 6 (x1), 7 (hex),
- * 8 (umh), 10 (tesa) [7, 8, 10 are x264 specific]
- * - encoding: MUST be set by user.
- * - decoding: unused
+ * This option does nothing
+ * @deprecated use codec private options instead
*/
- int me_method;
+ attribute_deprecated int me_method;
+#endif
/**
* If non NULL, 'draw_horiz_band' is called by the libavcodec
*/
float b_quant_factor;
- /** obsolete FIXME remove */
- int rc_strategy;
+#if FF_API_RC_STRATEGY
+ /** @deprecated use codec private option instead */
+ attribute_deprecated int rc_strategy;
#define FF_RC_STRATEGY_XVID 1
+#endif
int b_frame_strategy;
*/
int me_range;
+#if FF_API_QUANT_BIAS
/**
- * intra quantizer bias
- * - encoding: Set by user.
- * - decoding: unused
+ * @deprecated use encoder private option instead
*/
- int intra_quant_bias;
+ attribute_deprecated int intra_quant_bias;
#define FF_DEFAULT_QUANT_BIAS 999999
/**
- * inter quantizer bias
- * - encoding: Set by user.
- * - decoding: unused
+ * @deprecated use encoder private option instead
*/
- int inter_quant_bias;
+ attribute_deprecated int inter_quant_bias;
+#endif
/**
* slice flags
*/
int noise_reduction;
+#if FF_API_MPV_OPT
/**
- * Motion estimation threshold below which no motion estimation is
- * performed, but instead the user specified motion vectors are used.
- *
- * - encoding: Set by user.
- * - decoding: unused
+ * @deprecated this field is unused
*/
+ attribute_deprecated
int me_threshold;
/**
- * Macroblock threshold below which the user specified macroblock types will be used.
- * - encoding: Set by user.
- * - decoding: unused
+ * @deprecated this field is unused
*/
+ attribute_deprecated
int mb_threshold;
+#endif
/**
* precision of the intra DC coefficient - 8
*/
int skip_bottom;
+#if FF_API_MPV_OPT
/**
- * Border processing masking, raises the quantizer for mbs on the borders
- * of the picture.
- * - encoding: Set by user.
- * - decoding: unused
+ * @deprecated use encoder private options instead
*/
+ attribute_deprecated
float border_masking;
+#endif
/**
* minimum MB lagrange multipler
*
* - encoding: set by libavcodec in avcodec_open2(). Each submitted frame
* except the last must contain exactly frame_size samples per channel.
- * May be 0 when the codec has CODEC_CAP_VARIABLE_FRAME_SIZE set, then the
+ * May be 0 when the codec has AV_CODEC_CAP_VARIABLE_FRAME_SIZE set, then the
* frame size is not restricted.
* - decoding: may be set by some decoders to indicate constant frame size
*/
*/
int cutoff;
-#if FF_API_REQUEST_CHANNELS
- /**
- * Decoder should decode to this many channels if it can (0 for default)
- * - encoding: unused
- * - decoding: Set by user.
- * @deprecated Deprecated in favor of request_channel_layout.
- */
- attribute_deprecated int request_channels;
-#endif
-
/**
* Audio channel layout.
* - encoding: set by user.
*/
enum AVSampleFormat request_sample_fmt;
-#if FF_API_GET_BUFFER
- /**
- * Called at the beginning of each frame to get a buffer for it.
- *
- * The function will set AVFrame.data[], AVFrame.linesize[].
- * AVFrame.extended_data[] must also be set, but it should be the same as
- * AVFrame.data[] except for planar audio with more channels than can fit
- * in AVFrame.data[]. In that case, AVFrame.data[] shall still contain as
- * many data pointers as it can hold.
- *
- * if CODEC_CAP_DR1 is not set then get_buffer() must call
- * avcodec_default_get_buffer() instead of providing buffers allocated by
- * some other means.
- *
- * AVFrame.data[] should be 32- or 16-byte-aligned unless the CPU doesn't
- * need it. avcodec_default_get_buffer() aligns the output buffer properly,
- * but if get_buffer() is overridden then alignment considerations should
- * be taken into account.
- *
- * @see avcodec_default_get_buffer()
- *
- * Video:
- *
- * If pic.reference is set then the frame will be read later by libavcodec.
- * avcodec_align_dimensions2() should be used to find the required width and
- * height, as they normally need to be rounded up to the next multiple of 16.
- *
- * If frame multithreading is used and thread_safe_callbacks is set,
- * it may be called from a different thread, but not from more than one at
- * once. Does not need to be reentrant.
- *
- * @see release_buffer(), reget_buffer()
- * @see avcodec_align_dimensions2()
- *
- * Audio:
- *
- * Decoders request a buffer of a particular size by setting
- * AVFrame.nb_samples prior to calling get_buffer(). The decoder may,
- * however, utilize only part of the buffer by setting AVFrame.nb_samples
- * to a smaller value in the output frame.
- *
- * Decoders cannot use the buffer after returning from
- * avcodec_decode_audio4(), so they will not call release_buffer(), as it
- * is assumed to be released immediately upon return. In some rare cases,
- * a decoder may need to call get_buffer() more than once in a single
- * call to avcodec_decode_audio4(). In that case, when get_buffer() is
- * called again after it has already been called once, the previously
- * acquired buffer is assumed to be released at that time and may not be
- * reused by the decoder.
- *
- * As a convenience, av_samples_get_buffer_size() and
- * av_samples_fill_arrays() in libavutil may be used by custom get_buffer()
- * functions to find the required data size and to fill data pointers and
- * linesize. In AVFrame.linesize, only linesize[0] may be set for audio
- * since all planes must be the same size.
- *
- * @see av_samples_get_buffer_size(), av_samples_fill_arrays()
- *
- * - encoding: unused
- * - decoding: Set by libavcodec, user can override.
- *
- * @deprecated use get_buffer2()
- */
- attribute_deprecated
- int (*get_buffer)(struct AVCodecContext *c, AVFrame *pic);
-
- /**
- * Called to release buffers which were allocated with get_buffer.
- * A released buffer can be reused in get_buffer().
- * pic.data[*] must be set to NULL.
- * May be called from a different thread if frame multithreading is used,
- * but not by more than one thread at once, so does not need to be reentrant.
- * - encoding: unused
- * - decoding: Set by libavcodec, user can override.
- *
- * @deprecated custom freeing callbacks should be set from get_buffer2()
- */
- attribute_deprecated
- void (*release_buffer)(struct AVCodecContext *c, AVFrame *pic);
-
- /**
- * Called at the beginning of a frame to get cr buffer for it.
- * Buffer type (size, hints) must be the same. libavcodec won't check it.
- * libavcodec will pass previous buffer in pic, function should return
- * same buffer or new buffer with old frame "painted" into it.
- * If pic.data[0] == NULL must behave like get_buffer().
- * if CODEC_CAP_DR1 is not set then reget_buffer() must call
- * avcodec_default_reget_buffer() instead of providing buffers allocated by
- * some other means.
- * - encoding: unused
- * - decoding: Set by libavcodec, user can override.
- */
- attribute_deprecated
- int (*reget_buffer)(struct AVCodecContext *c, AVFrame *pic);
-#endif
-
/**
* This callback is called at the beginning of each frame to get data
* buffer(s) for it. There may be one contiguous buffer for all the data or
* buffers than buf[] can hold. extended_buf will be freed in
* av_frame_unref().
*
- * If CODEC_CAP_DR1 is not set then get_buffer2() must call
+ * If AV_CODEC_CAP_DR1 is not set then get_buffer2() must call
* avcodec_default_get_buffer2() instead of providing buffers allocated by
* some other means.
*
*/
int max_qdiff;
+#if FF_API_MPV_OPT
/**
- * ratecontrol qmin qmax limiting method
- * 0-> clipping, 1-> use a nice continuous function to limit qscale wthin qmin/qmax.
- * - encoding: Set by user.
- * - decoding: unused
+ * @deprecated use encoder private options instead
*/
+ attribute_deprecated
float rc_qsquish;
+ attribute_deprecated
float rc_qmod_amp;
+ attribute_deprecated
int rc_qmod_freq;
+#endif
/**
* decoder bitstream buffer size
int rc_override_count;
RcOverride *rc_override;
+#if FF_API_MPV_OPT
/**
- * rate control equation
- * - encoding: Set by user
- * - decoding: unused
+ * @deprecated use encoder private options instead
*/
+ attribute_deprecated
const char *rc_eq;
+#endif
/**
* maximum bitrate
*/
int rc_min_rate;
- float rc_buffer_aggressivity;
-
+#if FF_API_MPV_OPT
/**
- * initial complexity for pass1 ratecontrol
- * - encoding: Set by user.
- * - decoding: unused
+ * @deprecated use encoder private options instead
*/
+ attribute_deprecated
+ float rc_buffer_aggressivity;
+
+ attribute_deprecated
float rc_initial_cplx;
+#endif
/**
* Ratecontrol attempt to use, at maximum, <value> of what can be used without an underflow.
*/
int context_model;
+#if FF_API_MPV_OPT
/**
- * minimum Lagrange multipler
- * - encoding: Set by user.
- * - decoding: unused
+ * @deprecated use encoder private options instead
*/
+ attribute_deprecated
int lmin;
/**
- * maximum Lagrange multipler
- * - encoding: Set by user.
- * - decoding: unused
+ * @deprecated use encoder private options instead
*/
+ attribute_deprecated
int lmax;
+#endif
/**
* frame skip threshold
*/
int64_t timecode_frame_start;
+#if FF_API_RTP_CALLBACK
+ /**
+ * @deprecated unused
+ */
/* The RTP callback: This function is called */
/* every time the encoder has a packet to send. */
/* It depends on the encoder if the data starts */
/* with a Start Code (it should). H.263 does. */
/* mb_nb contains the number of macroblocks */
/* encoded in the RTP payload. */
+ attribute_deprecated
void (*rtp_callback)(struct AVCodecContext *avctx, void *data, int size, int mb_nb);
+#endif
int rtp_payload_size; /* The size of the RTP payload: the coder will */
/* do its best to deliver a chunk with size */
/**
* error
- * - encoding: Set by libavcodec if flags&CODEC_FLAG_PSNR.
+ * - encoding: Set by libavcodec if flags & AV_CODEC_FLAG_PSNR.
* - decoding: unused
*/
uint64_t error[AV_NUM_DATA_POINTERS];
int dct_algo;
#define FF_DCT_AUTO 0
#define FF_DCT_FASTINT 1
-#if FF_API_UNUSED_MEMBERS
#define FF_DCT_INT 2
-#endif /* FF_API_UNUSED_MEMBERS */
#define FF_DCT_MMX 3
#define FF_DCT_ALTIVEC 5
#define FF_DCT_FAAN 6
attribute_deprecated int lowres;
#endif
+#if FF_API_CODED_FRAME
/**
* the picture in the bitstream
* - encoding: Set by libavcodec.
* - decoding: unused
+ *
+ * @deprecated use the quality factor packet side data instead
*/
- AVFrame *coded_frame;
+ attribute_deprecated AVFrame *coded_frame;
+#endif
/**
* thread count
*/
int (*execute2)(struct AVCodecContext *c, int (*func)(struct AVCodecContext *c2, void *arg, int jobnr, int threadnr), void *arg2, int *ret, int count);
-#if FF_API_THREAD_OPAQUE
- /**
- * @deprecated this field should not be used from outside of lavc
- */
- attribute_deprecated
- void *thread_opaque;
-#endif
-
/**
* noise vs. sse weight for the nsse comparsion function
* - encoding: Set by user.
#define FF_PROFILE_DTS_96_24 40
#define FF_PROFILE_DTS_HD_HRA 50
#define FF_PROFILE_DTS_HD_MA 60
+#define FF_PROFILE_DTS_EXPRESS 70
#define FF_PROFILE_MPEG2_422 0
#define FF_PROFILE_MPEG2_HIGH 1
#define FF_PROFILE_JPEG2000_DCINEMA_2K 3
#define FF_PROFILE_JPEG2000_DCINEMA_4K 4
+#define FF_PROFILE_VP9_0 0
+#define FF_PROFILE_VP9_1 1
+#define FF_PROFILE_VP9_2 2
+#define FF_PROFILE_VP9_3 3
#define FF_PROFILE_HEVC_MAIN 1
#define FF_PROFILE_HEVC_MAIN_10 2
int error_rate;
#endif
-#if FF_API_CODEC_PKT
- /**
- * @deprecated this field is not supposed to be accessed from outside lavc
- */
- attribute_deprecated
- AVPacket *pkt;
-#endif
-
+#if FF_API_VBV_DELAY
/**
* VBV delay coded in the last frame (in periods of a 27 MHz clock).
* Used for compliant TS muxing.
* - encoding: Set by libavcodec.
* - decoding: unused.
+ * @deprecated this value is now exported as a part of
+ * AV_PKT_DATA_CPB_PROPERTIES packet side data
*/
+ attribute_deprecated
uint64_t vbv_delay;
+#endif
+#if FF_API_SIDEDATA_ONLY_PKT
/**
- * Encoding only. Allow encoders to output packets that do not contain any
- * encoded data, only side data.
+ * Encoding only and set by default. Allow encoders to output packets
+ * that do not contain any encoded data, only side data.
*
* Some encoders need to output such packets, e.g. to update some stream
* parameters at the end of encoding.
*
- * All callers are strongly recommended to set this option to 1 and update
- * their code to deal with such packets, since this behaviour may become
- * always enabled in the future (then this option will be deprecated and
- * later removed). To avoid ABI issues when this happens, the callers should
- * use AVOptions to set this field.
+ * @deprecated this field disables the default behaviour and
+ * it is kept only for compatibility.
*/
+ attribute_deprecated
int side_data_only_packets;
+#endif
/**
* Audio only. The number of "priming" samples (padding) inserted by the
* -initial_padding.
*/
int initial_padding;
+
+ /*
+ * - decoding: For codecs that store a framerate value in the compressed
+ * bitstream, the decoder may export it here. { 0, 1} when
+ * unknown.
+ * - encoding: unused
+ */
+ AVRational framerate;
+
+ /**
+ * Nominal unaccelerated pixel format, see AV_PIX_FMT_xxx.
+ * - encoding: unused.
+ * - decoding: Set by libavcodec before calling get_format()
+ */
+ enum AVPixelFormat sw_pix_fmt;
+
+ /**
+ * Additional data associated with the entire coded stream.
+ *
+ * - decoding: unused
+ * - encoding: may be set by libavcodec after avcodec_open2().
+ */
+ AVPacketSideData *coded_side_data;
+ int nb_coded_side_data;
+
} AVCodecContext;
/**
enum AVCodecID id;
/**
* Codec capabilities.
- * see CODEC_CAP_*
+ * see AV_CODEC_CAP_*
*/
int capabilities;
const AVRational *supported_framerates; ///< array of supported framerates, or NULL if any, array is terminated by {0,0}
* Will be called when seeking
*/
void (*flush)(AVCodecContext *);
+ /**
+ * Internal codec capabilities.
+ * See FF_CODEC_CAP_* in internal.h
+ */
+ int caps_internal;
} AVCodec;
/**
*/
#define AV_HWACCEL_FLAG_IGNORE_LEVEL (1 << 0)
+/**
+ * Hardware acceleration can output YUV pixel formats with a different chroma
+ * sampling than 4:2:0 and/or other than 8 bits per component.
+ */
+#define AV_HWACCEL_FLAG_ALLOW_HIGH_DEPTH (1 << 1)
+
/**
* @}
*/
+#if FF_API_AVPICTURE
/**
* @defgroup lavc_picture AVPicture
*
/**
* four components are given, that's all.
* the last component is alpha
+ * @deprecated Use the imgutils functions
*/
typedef struct AVPicture {
+ attribute_deprecated
uint8_t *data[AV_NUM_DATA_POINTERS];
+ attribute_deprecated
int linesize[AV_NUM_DATA_POINTERS]; ///< number of bytes per line
} AVPicture;
/**
* @}
*/
+#endif
#define AVPALETTE_SIZE 1024
#define AVPALETTE_COUNT 256
int h; ///< height of pict, undefined when pict is not set
int nb_colors; ///< number of colors in pict, undefined when pict is not set
+#if FF_API_AVPICTURE
/**
- * data+linesize for the bitmap of this subtitle.
- * can be set for text/ass as well once they where rendered
+ * @deprecated unused
*/
+ attribute_deprecated
AVPicture pict;
+#endif
+ /**
+ * data+linesize for the bitmap of this subtitle.
+ * Can be set for text/ass as well once they are rendered.
+ */
+ uint8_t *data[4];
+ int linesize[4];
+
enum AVSubtitleType type;
char *text; ///< 0 terminated plain UTF-8 text
*/
int avcodec_copy_context(AVCodecContext *dest, const AVCodecContext *src);
-#if FF_API_AVFRAME_LAVC
-/**
- * @deprecated use av_frame_alloc()
- */
-attribute_deprecated
-AVFrame *avcodec_alloc_frame(void);
-
-/**
- * Set the fields of the given AVFrame to default values.
- *
- * @param frame The AVFrame of which the fields should be set to default values.
- *
- * @deprecated use av_frame_unref()
- */
-attribute_deprecated
-void avcodec_get_frame_defaults(AVFrame *frame);
-
-/**
- * Free the frame and any dynamically allocated objects in it,
- * e.g. extended_data.
- *
- * @param frame frame to be freed. The pointer will be set to NULL.
- *
- * @warning this function does NOT free the data buffers themselves
- * (it does not know how, since they might have been allocated with
- * a custom get_buffer()).
- *
- * @deprecated use av_frame_free()
- */
-attribute_deprecated
-void avcodec_free_frame(AVFrame **frame);
-#endif
-
/**
* Initialize the AVCodecContext to use the given AVCodec. Prior to using this
* function the context has to be allocated with avcodec_alloc_context3().
*
* @warning This function is not thread safe!
*
+ * @note Always call this function before using decoding routines (such as
+ * @ref avcodec_decode_video2()).
+ *
* @code
* avcodec_register_all();
* av_dict_set(&opts, "b", "2.5M", 0);
* @{
*/
-#if FF_API_DESTRUCT_PACKET
/**
- * Default packet destructor.
- * @deprecated use the AVBuffer API instead
+ * Allocate an AVPacket and set its fields to default values. The resulting
+ * struct must be freed using av_packet_free().
+ *
+ * @return An AVPacket filled with default values or NULL on failure.
+ *
+ * @note this only allocates the AVPacket itself, not the data buffers. Those
+ * must be allocated through other means such as av_new_packet.
+ *
+ * @see av_new_packet
*/
-attribute_deprecated
-void av_destruct_packet(AVPacket *pkt);
-#endif
+AVPacket *av_packet_alloc(void);
+
+/**
+ * Create a new packet that references the same data as src.
+ *
+ * This is a shortcut for av_packet_alloc()+av_packet_ref().
+ *
+ * @return newly created AVPacket on success, NULL on error.
+ *
+ * @see av_packet_alloc
+ * @see av_packet_ref
+ */
+AVPacket *av_packet_clone(AVPacket *src);
+
+/**
+ * Free the packet, if the packet is reference counted, it will be
+ * unreferenced first.
+ *
+ * @param packet packet to be freed. The pointer will be set to NULL.
+ * @note passing NULL is a no-op.
+ */
+void av_packet_free(AVPacket **pkt);
/**
* Initialize optional fields of a packet with default values.
* function returns successfully, the data is owned by the underlying AVBuffer.
* The caller may not access the data through other means.
* @param size size of data in bytes, without the padding. I.e. the full buffer
- * size is assumed to be size + FF_INPUT_BUFFER_PADDING_SIZE.
+ * size is assumed to be size + AV_INPUT_BUFFER_PADDING_SIZE.
*
* @return 0 on success, a negative AVERROR on error
*/
int av_packet_from_data(AVPacket *pkt, uint8_t *data, int size);
+#if FF_API_AVPACKET_OLD_API
/**
* @warning This is a hack - the packet memory allocation stuff is broken. The
* packet is allocated if it was not really allocated.
+ *
+ * @deprecated Use av_packet_ref
*/
+attribute_deprecated
int av_dup_packet(AVPacket *pkt);
-
/**
* Free a packet.
*
+ * @deprecated Use av_packet_unref
+ *
* @param pkt packet to free
*/
+attribute_deprecated
void av_free_packet(AVPacket *pkt);
-
+#endif
/**
* Allocate new information of a packet.
*
uint8_t* av_packet_new_side_data(AVPacket *pkt, enum AVPacketSideDataType type,
int size);
+/**
+ * Wrap an existing array as a packet side data.
+ *
+ * @param pkt packet
+ * @param type side information type
+ * @param data the side data array. It must be allocated with the av_malloc()
+ * family of functions. The ownership of the data is transferred to
+ * pkt.
+ * @param size side information size
+ * @return a non-negative number on success, a negative AVERROR code on
+ * failure. On failure, the packet is unchanged and the data remains
+ * owned by the caller.
+ */
+int av_packet_add_side_data(AVPacket *pkt, enum AVPacketSideDataType type,
+ uint8_t *data, size_t size);
+
/**
* Shrink the already allocated side data buffer
*
*/
AVCodec *avcodec_find_decoder_by_name(const char *name);
-#if FF_API_GET_BUFFER
-attribute_deprecated int avcodec_default_get_buffer(AVCodecContext *s, AVFrame *pic);
-attribute_deprecated void avcodec_default_release_buffer(AVCodecContext *s, AVFrame *pic);
-attribute_deprecated int avcodec_default_reget_buffer(AVCodecContext *s, AVFrame *pic);
-#endif
-
/**
* The default callback for AVCodecContext.get_buffer2(). It is made public so
* it can be called by custom get_buffer2() implementations for decoders without
- * CODEC_CAP_DR1 set.
+ * AV_CODEC_CAP_DR1 set.
*/
int avcodec_default_get_buffer2(AVCodecContext *s, AVFrame *frame, int flags);
* buffer that is acceptable for the codec if you do not use any horizontal
* padding.
*
- * May only be used if a codec with CODEC_CAP_DR1 has been opened.
+ * May only be used if a codec with AV_CODEC_CAP_DR1 has been opened.
*/
void avcodec_align_dimensions(AVCodecContext *s, int *width, int *height);
* buffer that is acceptable for the codec if you also ensure that all
* line sizes are a multiple of the respective linesize_align[i].
*
- * May only be used if a codec with CODEC_CAP_DR1 has been opened.
+ * May only be used if a codec with AV_CODEC_CAP_DR1 has been opened.
*/
void avcodec_align_dimensions2(AVCodecContext *s, int *width, int *height,
int linesize_align[AV_NUM_DATA_POINTERS]);
* needs to be fed to the decoder with remaining data until it is completely
* consumed or an error occurs.
*
- * Some decoders (those marked with CODEC_CAP_DELAY) have a delay between input
+ * Some decoders (those marked with AV_CODEC_CAP_DELAY) have a delay between input
* and output. This means that for some packets they will not immediately
* produce decoded output and need to be flushed at the end of decoding to get
* all the decoded data. Flushing is done by calling this function with packets
* with avpkt->data set to NULL and avpkt->size set to 0 until it stops
* returning samples. It is safe to flush even those decoders that are not
- * marked with CODEC_CAP_DELAY, then no samples will be returned.
+ * marked with AV_CODEC_CAP_DELAY, then no samples will be returned.
*
- * @warning The input buffer, avpkt->data must be FF_INPUT_BUFFER_PADDING_SIZE
+ * @warning The input buffer, avpkt->data must be AV_INPUT_BUFFER_PADDING_SIZE
* larger than the actual read bytes because some optimized bitstream
* readers read 32 or 64 bits at once and could read over the end.
*
+ * @note The AVCodecContext MUST have been opened with @ref avcodec_open2()
+ * before packets may be fed to the decoder.
+ *
* @param avctx the codec context
* @param[out] frame The AVFrame in which to store decoded audio samples.
* The decoder will allocate a buffer for the decoded frame by
* @param[out] got_frame_ptr Zero if no frame could be decoded, otherwise it is
* non-zero. Note that this field being set to zero
* does not mean that an error has occurred. For
- * decoders with CODEC_CAP_DELAY set, no given decode
+ * decoders with AV_CODEC_CAP_DELAY set, no given decode
* call is guaranteed to produce a frame.
* @param[in] avpkt The input AVPacket containing the input buffer.
* At least avpkt->data and avpkt->size should be set. Some
* Some decoders may support multiple frames in a single AVPacket, such
* decoders would then just decode the first frame.
*
- * @warning The input buffer must be FF_INPUT_BUFFER_PADDING_SIZE larger than
+ * @warning The input buffer must be AV_INPUT_BUFFER_PADDING_SIZE larger than
* the actual read bytes because some optimized bitstream readers read 32 or 64
* bits at once and could read over the end.
*
* @warning The end of the input buffer buf should be set to 0 to ensure that
* no overreading happens for damaged MPEG streams.
*
- * @note Codecs which have the CODEC_CAP_DELAY capability set have a delay
+ * @note Codecs which have the AV_CODEC_CAP_DELAY capability set have a delay
* between input and output, these need to be fed with avpkt->data=NULL,
* avpkt->size=0 at the end to return the remaining frames.
*
+ * @note The AVCodecContext MUST have been opened with @ref avcodec_open2()
+ * before packets may be fed to the decoder.
+ *
* @param avctx the codec context
* @param[out] picture The AVFrame in which the decoded video frame will be stored.
* Use av_frame_alloc() to get an AVFrame. The codec will
* Return a negative value on error, otherwise return the number of bytes used.
* If no subtitle could be decompressed, got_sub_ptr is zero.
* Otherwise, the subtitle is stored in *sub.
- * Note that CODEC_CAP_DR1 is not available for subtitle codecs. This is for
+ * Note that AV_CODEC_CAP_DR1 is not available for subtitle codecs. This is for
* simplicity, because the performance difference is expect to be negligible
* and reusing a get_buffer written for video codecs would probably perform badly
* due to a potentially very different allocation pattern.
*
+ * @note The AVCodecContext MUST have been opened with @ref avcodec_open2()
+ * before packets may be fed to the decoder.
+ *
* @param avctx the codec context
* @param[out] sub The AVSubtitle in which the decoded subtitle will be stored, must be
freed with avsubtitle_free if *got_sub_ptr is set.
*/
int key_frame;
+#if FF_API_CONVERGENCE_DURATION
/**
- * Time difference in stream time base units from the pts of this
- * packet to the point at which the output from the decoder has converged
- * independent from the availability of previous frames. That is, the
- * frames are virtually identical no matter if decoding started from
- * the very first frame or from this keyframe.
- * Is AV_NOPTS_VALUE if unknown.
- * This field is not the display duration of the current frame.
- * This field has no meaning if the packet does not have AV_PKT_FLAG_KEY
- * set.
- *
- * The purpose of this field is to allow seeking in streams that have no
- * keyframes in the conventional sense. It corresponds to the
- * recovery point SEI in H.264 and match_time_delta in NUT. It is also
- * essential for some types of subtitle streams to ensure that all
- * subtitles are correctly displayed after seeking.
+ * @deprecated unused
*/
+ attribute_deprecated
int64_t convergence_duration;
+#endif
// Timestamp generation support:
/**
* For example, this corresponds to H.264 PicOrderCnt.
*/
int output_picture_number;
+
+ /**
+ * Dimensions of the decoded video intended for presentation.
+ */
+ int width;
+ int height;
+
+ /**
+ * Dimensions of the coded video.
+ */
+ int coded_width;
+ int coded_height;
+
+ /**
+ * The format of the coded data, corresponds to enum AVPixelFormat for video
+ * and for enum AVSampleFormat for audio.
+ *
+ * Note that a decoder can have considerable freedom in how exactly it
+ * decodes the data, so the format reported here might be different from the
+ * one returned by a decoder.
+ */
+ int format;
} AVCodecParserContext;
typedef struct AVCodecParser {
int codec_ids[5]; /* several codec IDs are permitted */
int priv_data_size;
int (*parser_init)(AVCodecParserContext *s);
+ /* This callback never returns an error, a negative value means that
+ * the frame start was in a previous packet. */
int (*parser_parse)(AVCodecParserContext *s,
AVCodecContext *avctx,
const uint8_t **poutbuf, int *poutbuf_size,
* output packet.
*
* If this function fails or produces no output, avpkt will be
- * freed using av_free_packet() (i.e. avpkt->destruct will be
- * called to free the user supplied buffer).
+ * freed using av_packet_unref().
* @param[in] frame AVFrame containing the raw audio data to be encoded.
* May be NULL when flushing an encoder that has the
- * CODEC_CAP_DELAY capability set.
- * If CODEC_CAP_VARIABLE_FRAME_SIZE is set, then each frame
+ * AV_CODEC_CAP_DELAY capability set.
+ * If AV_CODEC_CAP_VARIABLE_FRAME_SIZE is set, then each frame
* can have any number of samples.
* If it is not set, frame->nb_samples must be equal to
* avctx->frame_size for all frames except the last.
* caller, he is responsible for freeing it.
*
* If this function fails or produces no output, avpkt will be
- * freed using av_free_packet() (i.e. avpkt->destruct will be
- * called to free the user supplied buffer).
+ * freed using av_packet_unref().
* @param[in] frame AVFrame containing the raw video data to be encoded.
* May be NULL when flushing an encoder that has the
- * CODEC_CAP_DELAY capability set.
+ * AV_CODEC_CAP_DELAY capability set.
* @param[out] got_packet_ptr This field is set to 1 by libavcodec if the
* output packet is non-empty, and to 0 if it is
* empty. If the function returns an error, the
* @}
*/
+#if FF_API_AVPICTURE
/**
* @addtogroup lavc_picture
* @{
*/
/**
- * Allocate memory for a picture. Call avpicture_free() to free it.
- *
- * @see avpicture_fill()
- *
- * @param picture the picture to be filled in
- * @param pix_fmt the format of the picture
- * @param width the width of the picture
- * @param height the height of the picture
- * @return zero if successful, a negative value if not
+ * @deprecated unused
*/
+attribute_deprecated
int avpicture_alloc(AVPicture *picture, enum AVPixelFormat pix_fmt, int width, int height);
/**
- * Free a picture previously allocated by avpicture_alloc().
- * The data buffer used by the AVPicture is freed, but the AVPicture structure
- * itself is not.
- *
- * @param picture the AVPicture to be freed
+ * @deprecated unused
*/
+attribute_deprecated
void avpicture_free(AVPicture *picture);
/**
- * Fill in the AVPicture fields.
- * The fields of the given AVPicture are filled in by using the 'ptr' address
- * which points to the image data buffer. Depending on the specified picture
- * format, one or multiple image data pointers and line sizes will be set.
- * If a planar format is specified, several pointers will be set pointing to
- * the different picture planes and the line sizes of the different planes
- * will be stored in the lines_sizes array.
- * Call with ptr == NULL to get the required size for the ptr buffer.
- *
- * To allocate the buffer and fill in the AVPicture fields in one call,
- * use avpicture_alloc().
- *
- * @param picture AVPicture whose fields are to be filled in
- * @param ptr Buffer which will contain or contains the actual image data
- * @param pix_fmt The format in which the picture data is stored.
- * @param width the width of the image in pixels
- * @param height the height of the image in pixels
- * @return size of the image data in bytes
+ * @deprecated use av_image_fill_arrays() instead.
*/
+attribute_deprecated
int avpicture_fill(AVPicture *picture, uint8_t *ptr,
enum AVPixelFormat pix_fmt, int width, int height);
/**
- * Copy pixel data from an AVPicture into a buffer.
- * The data is stored compactly, without any gaps for alignment or padding
- * which may be applied by avpicture_fill().
- *
- * @see avpicture_get_size()
- *
- * @param[in] src AVPicture containing image data
- * @param[in] pix_fmt The format in which the picture data is stored.
- * @param[in] width the width of the image in pixels.
- * @param[in] height the height of the image in pixels.
- * @param[out] dest A buffer into which picture data will be copied.
- * @param[in] dest_size The size of 'dest'.
- * @return The number of bytes written to dest, or a negative value (error code) on error.
+ * @deprecated use av_image_copy_to_buffer() instead.
*/
+attribute_deprecated
int avpicture_layout(const AVPicture* src, enum AVPixelFormat pix_fmt,
int width, int height,
unsigned char *dest, int dest_size);
/**
- * Calculate the size in bytes that a picture of the given width and height
- * would occupy if stored in the given picture format.
- * Note that this returns the size of a compact representation as generated
- * by avpicture_layout(), which can be smaller than the size required for e.g.
- * avpicture_fill().
- *
- * @param pix_fmt the given picture format
- * @param width the width of the image
- * @param height the height of the image
- * @return Image data size in bytes or -1 on error (e.g. too large dimensions).
+ * @deprecated use av_image_get_buffer_size() instead.
*/
+attribute_deprecated
int avpicture_get_size(enum AVPixelFormat pix_fmt, int width, int height);
-#if FF_API_DEINTERLACE
/**
- * deinterlace - if not supported return -1
- *
- * @deprecated - use yadif (in libavfilter) instead
+ * @deprecated av_image_copy() instead.
*/
attribute_deprecated
-int avpicture_deinterlace(AVPicture *dst, const AVPicture *src,
- enum AVPixelFormat pix_fmt, int width, int height);
-#endif
-/**
- * Copy image src to dst. Wraps av_picture_data_copy() above.
- */
void av_picture_copy(AVPicture *dst, const AVPicture *src,
enum AVPixelFormat pix_fmt, int width, int height);
/**
- * Crop image top and left side.
+ * @deprecated unused
*/
+attribute_deprecated
int av_picture_crop(AVPicture *dst, const AVPicture *src,
enum AVPixelFormat pix_fmt, int top_band, int left_band);
/**
- * Pad image.
+ * @deprecated unused
*/
+attribute_deprecated
int av_picture_pad(AVPicture *dst, const AVPicture *src, int height, int width, enum AVPixelFormat pix_fmt,
int padtop, int padbottom, int padleft, int padright, int *color);
/**
* @}
*/
+#endif
/**
* @defgroup lavc_misc Utility functions
* Allocate a buffer with padding, reusing the given one if large enough.
*
* Same behaviour av_fast_malloc but the buffer has additional
- * FF_INPUT_PADDING_SIZE at the end which will always memset to 0.
+ * AV_INPUT_PADDING_SIZE at the end which will always memset to 0.
*
*/
void av_fast_padded_malloc(void *ptr, unsigned int *size, size_t min_size);
*/
const AVCodecDescriptor *avcodec_descriptor_get_by_name(const char *name);
+/**
+ * Allocate a CPB properties structure and initialize its fields to default
+ * values.
+ *
+ * @param size if non-NULL, the size of the allocated struct will be written
+ * here. This is useful for embedding it in side data.
+ *
+ * @return the newly allocated struct or NULL on failure
+ */
+AVCPBProperties *av_cpb_properties_alloc(size_t *size);
+
/**
* @}
*/
projects / ffmpeg / blobdiff