* Note: If the first 23 bits of the additional bytes are not 0, then damaged
* MPEG bitstreams could cause overread and segfault.
*/
-#define FF_INPUT_BUFFER_PADDING_SIZE 32
+#define AV_INPUT_BUFFER_PADDING_SIZE 32
/**
* @ingroup lavc_encoding
* minimum encoding buffer size
* Used to avoid some checks during header writing.
*/
-#define FF_MIN_BUFFER_SIZE 16384
+#define AV_INPUT_BUFFER_MIN_SIZE 16384
+#if FF_API_WITHOUT_PREFIX
+/**
+ * @deprecated use AV_INPUT_BUFFER_PADDING_SIZE instead
+ */
+#define FF_INPUT_BUFFER_PADDING_SIZE 32
+
+/**
+ * @deprecated use AV_INPUT_BUFFER_MIN_SIZE instead
+ */
+#define FF_MIN_BUFFER_SIZE 16384
+#endif /* FF_API_WITHOUT_PREFIX */
/**
* @ingroup lavc_encoding
* motion estimation type.
+ * @deprecated use codec private option instead
*/
+#if FF_API_MOTION_EST
enum Motion_Est_ID {
ME_ZERO = 1, ///< no search, that is use 0,0 vector whenever one is needed
ME_FULL,
ME_TESA, ///< transformed exhaustive search algorithm
ME_ITER=50, ///< iterative search
};
+#endif
/**
* @ingroup lavc_decoding
* Allow decoders to produce frames with data planes that are not aligned
* to CPU requirements (e.g. due to cropping).
*/
-#define CODEC_FLAG_UNALIGNED 0x0001
-#define CODEC_FLAG_QSCALE 0x0002 ///< Use fixed qscale.
-#define CODEC_FLAG_4MV 0x0004 ///< 4 MV per MB allowed / advanced prediction for H.263.
-#define CODEC_FLAG_OUTPUT_CORRUPT 0x0008 ///< Output even those frames that might be corrupted
-#define CODEC_FLAG_QPEL 0x0010 ///< Use qpel MC.
+#define AV_CODEC_FLAG_UNALIGNED (1 << 0)
+/**
+ * Use fixed qscale.
+ */
+#define AV_CODEC_FLAG_QSCALE (1 << 1)
+/**
+ * 4 MV per MB allowed / advanced prediction for H.263.
+ */
+#define AV_CODEC_FLAG_4MV (1 << 2)
+/**
+ * Output even those frames that might be corrupted.
+ */
+#define AV_CODEC_FLAG_OUTPUT_CORRUPT (1 << 3)
+/**
+ * Use qpel MC.
+ */
+#define AV_CODEC_FLAG_QPEL (1 << 4)
+/**
+ * Use internal 2pass ratecontrol in first pass mode.
+ */
+#define AV_CODEC_FLAG_PASS1 (1 << 9)
+/**
+ * Use internal 2pass ratecontrol in second pass mode.
+ */
+#define AV_CODEC_FLAG_PASS2 (1 << 10)
+/**
+ * loop filter.
+ */
+#define AV_CODEC_FLAG_LOOP_FILTER (1 << 11)
+/**
+ * Only decode/encode grayscale.
+ */
+#define AV_CODEC_FLAG_GRAY (1 << 13)
+/**
+ * error[?] variables will be set during encoding.
+ */
+#define AV_CODEC_FLAG_PSNR (1 << 15)
+/**
+ * Input bitstream might be truncated at a random location
+ * instead of only at frame boundaries.
+ */
+#define AV_CODEC_FLAG_TRUNCATED (1 << 16)
+/**
+ * Use interlaced DCT.
+ */
+#define AV_CODEC_FLAG_INTERLACED_DCT (1 << 18)
+/**
+ * Force low delay.
+ */
+#define AV_CODEC_FLAG_LOW_DELAY (1 << 19)
+/**
+ * Place global headers in extradata instead of every keyframe.
+ */
+#define AV_CODEC_FLAG_GLOBAL_HEADER (1 << 22)
+/**
+ * Use only bitexact stuff (except (I)DCT).
+ */
+#define AV_CODEC_FLAG_BITEXACT (1 << 23)
+/* Fx : Flag for h263+ extra options */
+/**
+ * H.263 advanced intra coding / MPEG-4 AC prediction
+ */
+#define AV_CODEC_FLAG_AC_PRED (1 << 24)
+/**
+ * interlaced motion estimation
+ */
+#define AV_CODEC_FLAG_INTERLACED_ME (1 << 29)
+/**
+ * Allow non spec compliant speedup tricks.
+ */
+#define AV_CODEC_FLAG_CLOSED_GOP (1U << 31)
+
+#define AV_CODEC_FLAG2_FAST (1 << 0)
+/**
+ * Skip bitstream encoding.
+ */
+#define AV_CODEC_FLAG2_NO_OUTPUT (1 << 2)
+/**
+ * Place global headers at every keyframe instead of in extradata.
+ */
+#define AV_CODEC_FLAG2_LOCAL_HEADER (1 << 3)
+
+/**
+ * timecode is in drop frame format. DEPRECATED!!!!
+ */
+#define AV_CODEC_FLAG2_DROP_FRAME_TIMECODE 0x00002000
+
+/**
+ * Input bitstream might be truncated at a packet boundaries
+ * instead of only at frame boundaries.
+ */
+#define AV_CODEC_FLAG2_CHUNKS (1 << 15)
+/**
+ * Discard cropping information from SPS.
+ */
+#define AV_CODEC_FLAG2_IGNORE_CROP (1 << 16)
+
+/**
+ * Show all frames before the first keyframe
+ */
+#define AV_CODEC_FLAG2_SHOW_ALL 0x00400000
+/**
+ * Export motion vectors through frame side data
+ */
+#define AV_CODEC_FLAG2_EXPORT_MVS 0x10000000
+/**
+ * Do not skip samples and export skip information as frame side data
+ */
+#define AV_CODEC_FLAG2_SKIP_MANUAL 0x20000000
+
+/* Unsupported options :
+ * Syntax Arithmetic coding (SAC)
+ * Reference Picture Selection
+ * Independent Segment Decoding */
+/* /Fx */
+/* codec capabilities */
+
+/**
+ * Decoder can use draw_horiz_band callback.
+ */
+#define AV_CODEC_CAP_DRAW_HORIZ_BAND (1 << 0)
+/**
+ * Codec uses get_buffer() for allocating buffers and supports custom allocators.
+ * If not set, it might not use get_buffer() at all or use operations that
+ * assume the buffer was allocated by avcodec_default_get_buffer.
+ */
+#define AV_CODEC_CAP_DR1 (1 << 1)
+#define AV_CODEC_CAP_TRUNCATED (1 << 3)
+/**
+ * Encoder or decoder requires flushing with NULL input at the end in order to
+ * give the complete and correct output.
+ *
+ * NOTE: If this flag is not set, the codec is guaranteed to never be fed with
+ * with NULL data. The user can still send NULL data to the public encode
+ * or decode function, but libavcodec will not pass it along to the codec
+ * unless this flag is set.
+ *
+ * Decoders:
+ * The decoder has a non-zero delay and needs to be fed with avpkt->data=NULL,
+ * avpkt->size=0 at the end to get the delayed data until the decoder no longer
+ * returns frames.
+ *
+ * Encoders:
+ * The encoder needs to be fed with NULL data at the end of encoding until the
+ * encoder no longer returns data.
+ *
+ * NOTE: For encoders implementing the AVCodec.encode2() function, setting this
+ * flag also means that the encoder must set the pts and duration for
+ * each output packet. If this flag is not set, the pts and duration will
+ * be determined by libavcodec from the input frame.
+ */
+#define AV_CODEC_CAP_DELAY (1 << 5)
+/**
+ * Codec can be fed a final frame with a smaller size.
+ * This can be used to prevent truncation of the last audio samples.
+ */
+#define AV_CODEC_CAP_SMALL_LAST_FRAME (1 << 6)
+
+#if FF_API_CAP_VDPAU
+/**
+ * Codec can export data for HW decoding (VDPAU).
+ */
+#define AV_CODEC_CAP_HWACCEL_VDPAU (1 << 7)
+#endif
+
+/**
+ * Codec can output multiple frames per AVPacket
+ * Normally demuxers return one frame at a time, demuxers which do not do
+ * are connected to a parser to split what they return into proper frames.
+ * This flag is reserved to the very rare category of codecs which have a
+ * bitstream that cannot be split into frames without timeconsuming
+ * operations like full decoding. Demuxers carring such bitstreams thus
+ * may return multiple frames in a packet. This has many disadvantages like
+ * prohibiting stream copy in many cases thus it should only be considered
+ * as a last resort.
+ */
+#define AV_CODEC_CAP_SUBFRAMES (1 << 8)
+/**
+ * Codec is experimental and is thus avoided in favor of non experimental
+ * encoders
+ */
+#define AV_CODEC_CAP_EXPERIMENTAL (1 << 9)
+/**
+ * Codec should fill in channel configuration and samplerate instead of container
+ */
+#define AV_CODEC_CAP_CHANNEL_CONF (1 << 10)
+/**
+ * Codec supports frame-level multithreading.
+ */
+#define AV_CODEC_CAP_FRAME_THREADS (1 << 12)
+/**
+ * Codec supports slice-based (or partition-based) multithreading.
+ */
+#define AV_CODEC_CAP_SLICE_THREADS (1 << 13)
+/**
+ * Codec supports changed parameters at any point.
+ */
+#define AV_CODEC_CAP_PARAM_CHANGE (1 << 14)
+/**
+ * Codec supports avctx->thread_count == 0 (auto).
+ */
+#define AV_CODEC_CAP_AUTO_THREADS (1 << 15)
+/**
+ * Audio encoder supports receiving a different number of samples in each call.
+ */
+#define AV_CODEC_CAP_VARIABLE_FRAME_SIZE (1 << 16)
+/**
+ * Codec is intra only.
+ */
+#define AV_CODEC_CAP_INTRA_ONLY 0x40000000
+/**
+ * Codec is lossless.
+ */
+#define AV_CODEC_CAP_LOSSLESS 0x80000000
+
+
+#if FF_API_WITHOUT_PREFIX
+/**
+ * Allow decoders to produce frames with data planes that are not aligned
+ * to CPU requirements (e.g. due to cropping).
+ */
+#define CODEC_FLAG_UNALIGNED AV_CODEC_FLAG_UNALIGNED
+#define CODEC_FLAG_QSCALE AV_CODEC_FLAG_QSCALE
+#define CODEC_FLAG_4MV AV_CODEC_FLAG_4MV
+#define CODEC_FLAG_OUTPUT_CORRUPT AV_CODEC_FLAG_OUTPUT_CORRUPT
+#define CODEC_FLAG_QPEL AV_CODEC_FLAG_QPEL
#if FF_API_GMC
/**
* @deprecated use the "gmc" private option of the libxvid encoder
*/
#define CODEC_FLAG_INPUT_PRESERVED 0x0100
#endif
-#define CODEC_FLAG_PASS1 0x0200 ///< Use internal 2pass ratecontrol in first pass mode.
-#define CODEC_FLAG_PASS2 0x0400 ///< Use internal 2pass ratecontrol in second pass mode.
-#define CODEC_FLAG_GRAY 0x2000 ///< Only decode/encode grayscale.
+#define CODEC_FLAG_PASS1 AV_CODEC_FLAG_PASS1
+#define CODEC_FLAG_PASS2 AV_CODEC_FLAG_PASS2
+#define CODEC_FLAG_GRAY AV_CODEC_FLAG_GRAY
#if FF_API_EMU_EDGE
/**
* @deprecated edges are not used/required anymore. I.e. this flag is now always
*/
#define CODEC_FLAG_EMU_EDGE 0x4000
#endif
-#define CODEC_FLAG_PSNR 0x8000 ///< error[?] variables will be set during encoding.
-#define CODEC_FLAG_TRUNCATED 0x00010000 /** Input bitstream might be truncated at a random
- location instead of only at frame boundaries. */
+#define CODEC_FLAG_PSNR AV_CODEC_FLAG_PSNR
+#define CODEC_FLAG_TRUNCATED AV_CODEC_FLAG_TRUNCATED
+
#if FF_API_NORMALIZE_AQP
/**
* @deprecated use the flag "naq" in the "mpv_flags" private option of the
*/
#define CODEC_FLAG_NORMALIZE_AQP 0x00020000
#endif
-#define CODEC_FLAG_INTERLACED_DCT 0x00040000 ///< Use interlaced DCT.
-#define CODEC_FLAG_LOW_DELAY 0x00080000 ///< Force low delay.
-#define CODEC_FLAG_GLOBAL_HEADER 0x00400000 ///< Place global headers in extradata instead of every keyframe.
-#define CODEC_FLAG_BITEXACT 0x00800000 ///< Use only bitexact stuff (except (I)DCT).
-/* Fx : Flag for h263+ extra options */
-#define CODEC_FLAG_AC_PRED 0x01000000 ///< H.263 advanced intra coding / MPEG-4 AC prediction
-#define CODEC_FLAG_LOOP_FILTER 0x00000800 ///< loop filter
-#define CODEC_FLAG_INTERLACED_ME 0x20000000 ///< interlaced motion estimation
-#define CODEC_FLAG_CLOSED_GOP 0x80000000
-#define CODEC_FLAG2_FAST 0x00000001 ///< Allow non spec compliant speedup tricks.
-#define CODEC_FLAG2_NO_OUTPUT 0x00000004 ///< Skip bitstream encoding.
-#define CODEC_FLAG2_LOCAL_HEADER 0x00000008 ///< Place global headers at every keyframe instead of in extradata.
-#define CODEC_FLAG2_DROP_FRAME_TIMECODE 0x00002000 ///< timecode is in drop frame format. DEPRECATED!!!!
-#define CODEC_FLAG2_IGNORE_CROP 0x00010000 ///< Discard cropping information from SPS.
-
-#define CODEC_FLAG2_CHUNKS 0x00008000 ///< Input bitstream might be truncated at a packet boundaries instead of only at frame boundaries.
-#define CODEC_FLAG2_SHOW_ALL 0x00400000 ///< Show all frames before the first keyframe
-#define CODEC_FLAG2_EXPORT_MVS 0x10000000 ///< Export motion vectors through frame side data
-#define CODEC_FLAG2_SKIP_MANUAL 0x20000000 ///< Do not skip samples and export skip information as frame side data
+#define CODEC_FLAG_INTERLACED_DCT AV_CODEC_FLAG_INTERLACED_DCT
+#define CODEC_FLAG_LOW_DELAY AV_CODEC_FLAG_LOW_DELAY
+#define CODEC_FLAG_GLOBAL_HEADER AV_CODEC_FLAG_GLOBAL_HEADER
+#define CODEC_FLAG_BITEXACT AV_CODEC_FLAG_BITEXACT
+#define CODEC_FLAG_AC_PRED AV_CODEC_FLAG_AC_PRED
+#define CODEC_FLAG_LOOP_FILTER AV_CODEC_FLAG_LOOP_FILTER
+#define CODEC_FLAG_INTERLACED_ME AV_CODEC_FLAG_INTERLACED_ME
+#define CODEC_FLAG_CLOSED_GOP AV_CODEC_FLAG_CLOSED_GOP
+#define CODEC_FLAG2_FAST AV_CODEC_FLAG2_FAST
+#define CODEC_FLAG2_NO_OUTPUT AV_CODEC_FLAG2_NO_OUTPUT
+#define CODEC_FLAG2_LOCAL_HEADER AV_CODEC_FLAG2_LOCAL_HEADER
+#define CODEC_FLAG2_DROP_FRAME_TIMECODE AV_CODEC_FLAG2_DROP_FRAME_TIMECODE
+#define CODEC_FLAG2_IGNORE_CROP AV_CODEC_FLAG2_IGNORE_CROP
+
+#define CODEC_FLAG2_CHUNKS AV_CODEC_FLAG2_CHUNKS
+#define CODEC_FLAG2_SHOW_ALL AV_CODEC_FLAG2_SHOW_ALL
+#define CODEC_FLAG2_EXPORT_MVS AV_CODEC_FLAG2_EXPORT_MVS
+#define CODEC_FLAG2_SKIP_MANUAL AV_CODEC_FLAG2_SKIP_MANUAL
/* Unsupported options :
* Syntax Arithmetic coding (SAC)
* codecs
*/
#define HWACCEL_CODEC_CAP_EXPERIMENTAL 0x0200
+#endif /* FF_API_WITHOUT_PREFIX */
#if FF_API_MB_TYPE
//The following defines may change, don't expect compatibility if you use them.
#define FF_COMPRESSION_DEFAULT -1
/**
- * CODEC_FLAG_*.
+ * AV_CODEC_FLAG_*.
* - encoding: Set by user.
* - decoding: Set by user.
*/
int flags;
/**
- * CODEC_FLAG2_*
+ * AV_CODEC_FLAG2_*
* - encoding: Set by user.
* - decoding: Set by user.
*/
* mjpeg: Huffman tables
* rv10: additional flags
* mpeg4: global headers (they can be in the bitstream or here)
- * The allocated memory should be FF_INPUT_BUFFER_PADDING_SIZE bytes larger
+ * The allocated memory should be AV_INPUT_BUFFER_PADDING_SIZE bytes larger
* than extradata_size to avoid problems if it is read with the bitstream reader.
* The bytewise contents of extradata must not depend on the architecture or CPU endianness.
* - encoding: Set/allocated/freed by libavcodec.
*/
enum AVPixelFormat pix_fmt;
+#if FF_API_MOTION_EST
/**
- * Motion estimation algorithm used for video coding.
- * 1 (zero), 2 (full), 3 (log), 4 (phods), 5 (epzs), 6 (x1), 7 (hex),
- * 8 (umh), 9 (iter), 10 (tesa) [7, 8, 10 are x264 specific, 9 is snow specific]
- * - encoding: MUST be set by user.
- * - decoding: unused
+ * This option does nothing
+ * @deprecated use codec private options instead
*/
- int me_method;
+ attribute_deprecated int me_method;
+#endif
/**
* If non NULL, 'draw_horiz_band' is called by the libavcodec
*
* - encoding: set by libavcodec in avcodec_open2(). Each submitted frame
* except the last must contain exactly frame_size samples per channel.
- * May be 0 when the codec has CODEC_CAP_VARIABLE_FRAME_SIZE set, then the
+ * May be 0 when the codec has AV_CODEC_CAP_VARIABLE_FRAME_SIZE set, then the
* frame size is not restricted.
* - decoding: may be set by some decoders to indicate constant frame size
*/
* buffers than buf[] can hold. extended_buf will be freed in
* av_frame_unref().
*
- * If CODEC_CAP_DR1 is not set then get_buffer2() must call
+ * If AV_CODEC_CAP_DR1 is not set then get_buffer2() must call
* avcodec_default_get_buffer2() instead of providing buffers allocated by
* some other means.
*
/**
* error
- * - encoding: Set by libavcodec if flags&CODEC_FLAG_PSNR.
+ * - encoding: Set by libavcodec if flags & AV_CODEC_FLAG_PSNR.
* - decoding: unused
*/
uint64_t error[AV_NUM_DATA_POINTERS];
enum AVCodecID id;
/**
* Codec capabilities.
- * see CODEC_CAP_*
+ * see AV_CODEC_CAP_*
*/
int capabilities;
const AVRational *supported_framerates; ///< array of supported framerates, or NULL if any, array is terminated by {0,0}
* function returns successfully, the data is owned by the underlying AVBuffer.
* The caller may not access the data through other means.
* @param size size of data in bytes, without the padding. I.e. the full buffer
- * size is assumed to be size + FF_INPUT_BUFFER_PADDING_SIZE.
+ * size is assumed to be size + AV_INPUT_BUFFER_PADDING_SIZE.
*
* @return 0 on success, a negative AVERROR on error
*/
/**
* The default callback for AVCodecContext.get_buffer2(). It is made public so
* it can be called by custom get_buffer2() implementations for decoders without
- * CODEC_CAP_DR1 set.
+ * AV_CODEC_CAP_DR1 set.
*/
int avcodec_default_get_buffer2(AVCodecContext *s, AVFrame *frame, int flags);
* buffer that is acceptable for the codec if you do not use any horizontal
* padding.
*
- * May only be used if a codec with CODEC_CAP_DR1 has been opened.
+ * May only be used if a codec with AV_CODEC_CAP_DR1 has been opened.
*/
void avcodec_align_dimensions(AVCodecContext *s, int *width, int *height);
* buffer that is acceptable for the codec if you also ensure that all
* line sizes are a multiple of the respective linesize_align[i].
*
- * May only be used if a codec with CODEC_CAP_DR1 has been opened.
+ * May only be used if a codec with AV_CODEC_CAP_DR1 has been opened.
*/
void avcodec_align_dimensions2(AVCodecContext *s, int *width, int *height,
int linesize_align[AV_NUM_DATA_POINTERS]);
* needs to be fed to the decoder with remaining data until it is completely
* consumed or an error occurs.
*
- * Some decoders (those marked with CODEC_CAP_DELAY) have a delay between input
+ * Some decoders (those marked with AV_CODEC_CAP_DELAY) have a delay between input
* and output. This means that for some packets they will not immediately
* produce decoded output and need to be flushed at the end of decoding to get
* all the decoded data. Flushing is done by calling this function with packets
* with avpkt->data set to NULL and avpkt->size set to 0 until it stops
* returning samples. It is safe to flush even those decoders that are not
- * marked with CODEC_CAP_DELAY, then no samples will be returned.
+ * marked with AV_CODEC_CAP_DELAY, then no samples will be returned.
*
- * @warning The input buffer, avpkt->data must be FF_INPUT_BUFFER_PADDING_SIZE
+ * @warning The input buffer, avpkt->data must be AV_INPUT_BUFFER_PADDING_SIZE
* larger than the actual read bytes because some optimized bitstream
* readers read 32 or 64 bits at once and could read over the end.
*
* @param[out] got_frame_ptr Zero if no frame could be decoded, otherwise it is
* non-zero. Note that this field being set to zero
* does not mean that an error has occurred. For
- * decoders with CODEC_CAP_DELAY set, no given decode
+ * decoders with AV_CODEC_CAP_DELAY set, no given decode
* call is guaranteed to produce a frame.
* @param[in] avpkt The input AVPacket containing the input buffer.
* At least avpkt->data and avpkt->size should be set. Some
* Some decoders may support multiple frames in a single AVPacket, such
* decoders would then just decode the first frame.
*
- * @warning The input buffer must be FF_INPUT_BUFFER_PADDING_SIZE larger than
+ * @warning The input buffer must be AV_INPUT_BUFFER_PADDING_SIZE larger than
* the actual read bytes because some optimized bitstream readers read 32 or 64
* bits at once and could read over the end.
*
* @warning The end of the input buffer buf should be set to 0 to ensure that
* no overreading happens for damaged MPEG streams.
*
- * @note Codecs which have the CODEC_CAP_DELAY capability set have a delay
+ * @note Codecs which have the AV_CODEC_CAP_DELAY capability set have a delay
* between input and output, these need to be fed with avpkt->data=NULL,
* avpkt->size=0 at the end to return the remaining frames.
*
* Return a negative value on error, otherwise return the number of bytes used.
* If no subtitle could be decompressed, got_sub_ptr is zero.
* Otherwise, the subtitle is stored in *sub.
- * Note that CODEC_CAP_DR1 is not available for subtitle codecs. This is for
+ * Note that AV_CODEC_CAP_DR1 is not available for subtitle codecs. This is for
* simplicity, because the performance difference is expect to be negligible
* and reusing a get_buffer written for video codecs would probably perform badly
* due to a potentially very different allocation pattern.
* called to free the user supplied buffer).
* @param[in] frame AVFrame containing the raw audio data to be encoded.
* May be NULL when flushing an encoder that has the
- * CODEC_CAP_DELAY capability set.
- * If CODEC_CAP_VARIABLE_FRAME_SIZE is set, then each frame
+ * AV_CODEC_CAP_DELAY capability set.
+ * If AV_CODEC_CAP_VARIABLE_FRAME_SIZE is set, then each frame
* can have any number of samples.
* If it is not set, frame->nb_samples must be equal to
* avctx->frame_size for all frames except the last.
* called to free the user supplied buffer).
* @param[in] frame AVFrame containing the raw video data to be encoded.
* May be NULL when flushing an encoder that has the
- * CODEC_CAP_DELAY capability set.
+ * AV_CODEC_CAP_DELAY capability set.
* @param[out] got_packet_ptr This field is set to 1 by libavcodec if the
* output packet is non-empty, and to 0 if it is
* empty. If the function returns an error, the
/**
* Same behaviour av_fast_malloc but the buffer has additional
- * FF_INPUT_BUFFER_PADDING_SIZE at the end which will always be 0.
+ * AV_INPUT_BUFFER_PADDING_SIZE at the end which will always be 0.
*
* In addition the whole buffer will initially and after resizes
* be 0-initialized so that no uninitialized data will ever appear.