* @{
* @}
* @}
+ */
+
+/**
+ * @ingroup libavc
+ * @defgroup lavc_encdec send/receive encoding and decoding API overview
+ * @{
*
+ * The avcodec_send_packet()/avcodec_receive_frame()/avcodec_send_frame()/
+ * avcodec_receive_packet() functions provide an encode/decode API, which
+ * decouples input and output.
+ *
+ * The API is very similar for encoding/decoding and audio/video, and works as
+ * follows:
+ * - Set up and open the AVCodecContext as usual.
+ * - Send valid input:
+ * - For decoding, call avcodec_send_packet() to give the decoder raw
+ * compressed data in an AVPacket.
+ * - For encoding, call avcodec_send_frame() to give the decoder an AVFrame
+ * containing uncompressed audio or video.
+ * In both cases, it is recommended that AVPackets and AVFrames are
+ * refcounted, or libavcodec might have to copy the input data. (libavformat
+ * always returns refcounted AVPackets, and av_frame_get_buffer() allocates
+ * refcounted AVFrames.)
+ * - Receive output in a loop. Periodically call one of the avcodec_receive_*()
+ * functions and process their output:
+ * - For decoding, call avcodec_receive_frame(). On success, it will return
+ * an AVFrame containing uncompressed audio or video data.
+ * - For encoding, call avcodec_receive_packet(). On success, it will return
+ * an AVPacket with a compressed frame.
+ * Repeat this call until it returns AVERROR(EAGAIN) or an error. The
+ * AVERROR(EAGAIN) return value means that new input data is required to
+ * return new output. In this case, continue with sending input. For each
+ * input frame/packet, the codec will typically return 1 output frame/packet,
+ * but it can also be 0 or more than 1.
+ *
+ * At the beginning of decoding or encoding, the codec might accept multiple
+ * input frames/packets without returning a frame, until its internal buffers
+ * are filled. This situation is handled transparently if you follow the steps
+ * outlined above.
+ *
+ * End of stream situations. These require "flushing" (aka draining) the codec,
+ * as the codec might buffer multiple frames or packets internally for
+ * performance or out of necessity (consider B-frames).
+ * This is handled as follows:
+ * - Instead of valid input, send NULL to the avcodec_send_packet() (decoding)
+ * or avcodec_send_frame() (encoding) functions. This will enter draining
+ * mode.
+ * - Call avcodec_receive_frame() (decoding) or avcodec_receive_packet()
+ * (encoding) in a loop until AVERROR_EOF is returned. The functions will
+ * not return AVERROR(EAGAIN), unless you forgot to enter draining mode.
+ * - Before decoding can be resumed again, the codec has to be reset with
+ * avcodec_flush_buffers().
+ *
+ * Using the API as outlined above is highly recommended. But it is also
+ * possible to call functions outside of this rigid schema. For example, you can
+ * call avcodec_send_packet() repeatedly without calling
+ * avcodec_receive_frame(). In this case, avcodec_send_packet() will succeed
+ * until the codec's internal buffer has been filled up (which is typically of
+ * size 1 per output frame, after initial input), and then reject input with
+ * AVERROR(EAGAIN). Once it starts rejecting input, you have no choice but to
+ * read at least some output.
+ *
+ * Not all codecs will follow a rigid and predictable dataflow; the only
+ * guarantee is that an AVERROR(EAGAIN) return value on a send/receive call on
+ * one end implies that a receive/send call on the other end will succeed. In
+ * general, no codec will permit unlimited buffering of input or output.
+ *
+ * This API replaces the following legacy functions:
+ * - avcodec_decode_video2() and avcodec_decode_audio4():
+ * Use avcodec_send_packet() to feed input to the decoder, then use
+ * avcodec_receive_frame() to receive decoded frames after each packet.
+ * Unlike with the old video decoding API, multiple frames might result from
+ * a packet. For audio, splitting the input packet into frames by partially
+ * decoding packets becomes transparent to the API user. You never need to
+ * feed an AVPacket to the API twice.
+ * Additionally, sending a flush/draining packet is required only once.
+ * - avcodec_encode_video2()/avcodec_encode_audio2():
+ * Use avcodec_send_frame() to feed input to the encoder, then use
+ * avcodec_receive_packet() to receive encoded packets.
+ * Providing user-allocated buffers for avcodec_receive_packet() is not
+ * possible.
+ * - The new API does not handle subtitles yet.
+ *
+ * Mixing new and old function calls on the same AVCodecContext is not allowed,
+ * and will result in arbitrary behavior.
+ *
+ * Some codecs might require using the new API; using the old API will return
+ * an error when calling it.
+ * @}
*/
/**
AV_CODEC_ID_DXV,
AV_CODEC_ID_SCREENPRESSO,
AV_CODEC_ID_RSCC,
+ AV_CODEC_ID_MAGICYUV,
+ AV_CODEC_ID_TRUEMOTION2RT,
+ AV_CODEC_ID_AV1,
/* various PCM "codecs" */
AV_CODEC_ID_FIRST_AUDIO = 0x10000, ///< A dummy id pointing at the start of audio codecs
* Codec properties, a combination of AV_CODEC_PROP_* flags.
*/
int props;
+ /**
+ * If non-NULL, an array of profiles recognized for this codec.
+ * Terminated with FF_PROFILE_UNKNOWN.
+ */
+ const struct AVProfile *profiles;
} AVCodecDescriptor;
/**
* Use only bitexact stuff (except (I)DCT).
*/
#define AV_CODEC_FLAG_BITEXACT (1 << 23)
-/* Fx : Flag for h263+ extra options */
+/* Fx : Flag for H.263+ extra options */
/**
* H.263 advanced intra coding / MPEG-4 AC prediction
*/
* are connected to a parser to split what they return into proper frames.
* This flag is reserved to the very rare category of codecs which have a
* bitstream that cannot be split into frames without timeconsuming
- * operations like full decoding. Demuxers carring such bitstreams thus
+ * operations like full decoding. Demuxers carrying such bitstreams thus
* may return multiple frames in a packet. This has many disadvantages like
* prohibiting stream copy in many cases thus it should only be considered
* as a last resort.
#define CODEC_FLAG_LOW_DELAY 0x00080000 ///< Force low delay.
#define CODEC_FLAG_GLOBAL_HEADER 0x00400000 ///< Place global headers in extradata instead of every keyframe.
#define CODEC_FLAG_BITEXACT 0x00800000 ///< Use only bitexact stuff (except (I)DCT).
-/* Fx : Flag for h263+ extra options */
+/* Fx : Flag for H.263+ extra options */
#define CODEC_FLAG_AC_PRED 0x01000000 ///< H.263 advanced intra coding / MPEG-4 AC prediction
#define CODEC_FLAG_LOOP_FILTER 0x00000800 ///< loop filter
#define CODEC_FLAG_INTERLACED_ME 0x20000000 ///< interlaced motion estimation
* are connected to a parser to split what they return into proper frames.
* This flag is reserved to the very rare category of codecs which have a
* bitstream that cannot be split into frames without timeconsuming
- * operations like full decoding. Demuxers carring such bitstreams thus
+ * operations like full decoding. Demuxers carrying such bitstreams thus
* may return multiple frames in a packet. This has many disadvantages like
* prohibiting stream copy in many cases thus it should only be considered
* as a last resort.
#define MB_TYPE_L0L1 (MB_TYPE_L0 | MB_TYPE_L1)
#define MB_TYPE_QUANT 0x00010000
#define MB_TYPE_CBP 0x00020000
-//Note bits 24-31 are reserved for codec specific use (h264 ref0, mpeg1 0mv, ...)
+// Note bits 24-31 are reserved for codec specific use (H.264 ref0, MPEG-1 0mv, ...)
#endif
/**
* @{
*/
enum AVPacketSideDataType {
+ /**
+ * An AV_PKT_DATA_PALETTE side data packet contains exactly AVPALETTE_SIZE
+ * bytes worth of palette. This side data signals that a new palette is
+ * present.
+ */
AV_PKT_DATA_PALETTE,
+
+ /**
+ * The AV_PKT_DATA_NEW_EXTRADATA is used to notify the codec or the format
+ * that the extradata buffer was changed and the receiving side should
+ * act upon it appropriately. The new extradata is embedded in the side
+ * data buffer and should be immediately used for processing the current
+ * frame or packet.
+ */
AV_PKT_DATA_NEW_EXTRADATA,
/**
* This side data corresponds to the AVCPBProperties struct.
*/
AV_PKT_DATA_CPB_PROPERTIES,
+
+ /**
+ * This side data should be associated with a video stream and corresponds
+ * to the AVSphericalMapping structure.
+ */
+ AV_PKT_DATA_SPHERICAL,
};
typedef struct AVPacketSideData {
/**
* some codecs need / can use extradata like Huffman tables.
- * mjpeg: Huffman tables
+ * MJPEG: Huffman tables
* rv10: additional flags
- * mpeg4: global headers (they can be in the bitstream or here)
+ * MPEG-4: global headers (they can be in the bitstream or here)
* The allocated memory should be AV_INPUT_BUFFER_PADDING_SIZE bytes larger
- * than extradata_size to avoid prolems if it is read with the bitstream reader.
+ * than extradata_size to avoid problems if it is read with the bitstream reader.
* The bytewise contents of extradata must not depend on the architecture or CPU endianness.
* - encoding: Set/allocated/freed by libavcodec.
* - decoding: Set/allocated/freed by user.
* picture width / height.
*
* @note Those fields may not match the values of the last
- * AVFrame outputted by avcodec_decode_video2 due frame
+ * AVFrame output by avcodec_decode_video2 due frame
* reordering.
*
* - encoding: MUST be set by user.
* the decoded frame is cropped before being output.
*
* @note Those field may not match the value of the last
- * AVFrame outputted by avcodec_decode_video2 due frame
+ * AVFrame output by avcodec_receive_frame() due frame
* reordering.
*
* - encoding: unused
/**
* Pixel format, see AV_PIX_FMT_xxx.
* May be set by the demuxer if known from headers.
- * May be overriden by the decoder if it knows better.
+ * May be overridden by the decoder if it knows better.
*
* @note This field may not match the value of the last
- * AVFrame outputted by avcodec_decode_video2 due frame
+ * AVFrame output by avcodec_receive_frame() due frame
* reordering.
*
* - encoding: Set by user.
#define FF_RC_STRATEGY_XVID 1
#endif
+#if FF_API_PRIVATE_OPT
+ /** @deprecated use encoder private options instead */
+ attribute_deprecated
int b_frame_strategy;
+#endif
/**
* qscale offset between IP and B-frames
*/
int has_b_frames;
- /**
- * 0-> h263 quant 1-> mpeg quant
- * - encoding: Set by user.
- * - decoding: unused
- */
+#if FF_API_PRIVATE_OPT
+ /** @deprecated use encoder private options instead */
+ attribute_deprecated
int mpeg_quant;
+#endif
/**
- * qscale factor between P and I-frames
- * If > 0 then the last p frame quantizer will be used (q= lastp_q*factor+offset).
+ * qscale factor between P- and I-frames
+ * If > 0 then the last P-frame quantizer will be used (q = lastp_q * factor + offset).
* If < 0 then normal ratecontrol will be done (q= -normal_q*factor+offset).
* - encoding: Set by user.
* - decoding: unused
* - decoding: Set by user (or 0).
*/
int slice_count;
- /**
- * prediction method (needed for huffyuv)
- * - encoding: Set by user.
- * - decoding: unused
- */
+
+#if FF_API_PRIVATE_OPT
+ /** @deprecated use encoder private options instead */
+ attribute_deprecated
int prediction_method;
#define FF_PRED_LEFT 0
#define FF_PRED_PLANE 1
#define FF_PRED_MEDIAN 2
+#endif
/**
* slice offsets in the frame in bytes
*/
int last_predictor_count;
- /**
- * prepass for motion estimation
- * - encoding: Set by user.
- * - decoding: unused
- */
+#if FF_API_PRIVATE_OPT
+ /** @deprecated use encoder private options instead */
+ attribute_deprecated
int pre_me;
+#endif
/**
* motion estimation prepass comparison function
*/
int slice_flags;
#define SLICE_FLAG_CODED_ORDER 0x0001 ///< draw_horiz_band() is called in coded order instead of display
-#define SLICE_FLAG_ALLOW_FIELD 0x0002 ///< allow draw_horiz_band() with field slices (MPEG2 field pics)
+#define SLICE_FLAG_ALLOW_FIELD 0x0002 ///< allow draw_horiz_band() with field slices (MPEG-2 field pics)
#define SLICE_FLAG_ALLOW_PLANE 0x0004 ///< allow draw_horiz_band() with 1 component at a time (SVQ1)
#if FF_API_XVMC
*/
uint16_t *inter_matrix;
- /**
- * scene change detection threshold
- * 0 is default, larger means fewer detected scene changes.
- * - encoding: Set by user.
- * - decoding: unused
- */
+#if FF_API_PRIVATE_OPT
+ /** @deprecated use encoder private options instead */
+ attribute_deprecated
int scenechange_threshold;
- /**
- * noise reduction strength
- * - encoding: Set by user.
- * - decoding: unused
- */
+ /** @deprecated use encoder private options instead */
+ attribute_deprecated
int noise_reduction;
+#endif
#if FF_API_MPV_OPT
/**
#endif
/**
- * minimum MB lagrange multipler
+ * minimum MB Lagrange multiplier
* - encoding: Set by user.
* - decoding: unused
*/
int mb_lmin;
/**
- * maximum MB lagrange multipler
+ * maximum MB Lagrange multiplier
* - encoding: Set by user.
* - decoding: unused
*/
int mb_lmax;
+#if FF_API_PRIVATE_OPT
/**
- *
- * - encoding: Set by user.
- * - decoding: unused
+ * @deprecated use encoder private options instead
*/
+ attribute_deprecated
int me_penalty_compensation;
+#endif
/**
- *
* - encoding: Set by user.
* - decoding: unused
*/
int bidir_refine;
- /**
- *
- * - encoding: Set by user.
- * - decoding: unused
- */
+#if FF_API_PRIVATE_OPT
+ /** @deprecated use encoder private options instead */
+ attribute_deprecated
int brd_scale;
+#endif
/**
* minimum GOP size
*/
int refs;
- /**
- * chroma qp offset from luma
- * - encoding: Set by user.
- * - decoding: unused
- */
+#if FF_API_PRIVATE_OPT
+ /** @deprecated use encoder private options instead */
+ attribute_deprecated
int chromaoffset;
+#endif
#if FF_API_UNUSED_MEMBERS
/**
#endif
/**
- *
* Note: Value depends upon the compare function used for fullpel ME.
* - encoding: Set by user.
* - decoding: unused
*/
int mv0_threshold;
- /**
- * Adjust sensitivity of b_frame_strategy 1.
- * - encoding: Set by user.
- * - decoding: unused
- */
+#if FF_API_PRIVATE_OPT
+ /** @deprecated use encoder private options instead */
+ attribute_deprecated
int b_sensitivity;
+#endif
/**
* Chromaticity coordinates of the source primaries.
* to all data planes. data[] must hold as many pointers as it can.
* extended_data must be allocated with av_malloc() and will be freed in
* av_frame_unref().
- * * otherwise exended_data must point to data
+ * * otherwise extended_data must point to data
* - buf[] must contain one or more pointers to AVBufferRef structures. Each of
* the frame's data and extended_data pointers must be contained in these. That
* is, one AVBufferRef for each allocated chunk of memory, not necessarily one
* Otherwise, the decoded frames must not be freed by the caller and are
* only valid until the next decode call.
*
+ * This is always automatically enabled if avcodec_receive_frame() is used.
+ *
* - encoding: unused
* - decoding: set by the caller before avcodec_open2().
*/
int coder_type;
#endif /* FF_API_CODER_TYPE */
- /**
- * context model
- * - encoding: Set by user.
- * - decoding: unused
- */
+#if FF_API_PRIVATE_OPT
+ /** @deprecated use encoder private options instead */
+ attribute_deprecated
int context_model;
+#endif
#if FF_API_MPV_OPT
/**
int lmax;
#endif
- /**
- * frame skip threshold
- * - encoding: Set by user.
- * - decoding: unused
- */
+#if FF_API_PRIVATE_OPT
+ /** @deprecated use encoder private options instead */
+ attribute_deprecated
int frame_skip_threshold;
- /**
- * frame skip factor
- * - encoding: Set by user.
- * - decoding: unused
- */
+ /** @deprecated use encoder private options instead */
+ attribute_deprecated
int frame_skip_factor;
- /**
- * frame skip exponent
- * - encoding: Set by user.
- * - decoding: unused
- */
+ /** @deprecated use encoder private options instead */
+ attribute_deprecated
int frame_skip_exp;
- /**
- * frame skip comparison function
- * - encoding: Set by user.
- * - decoding: unused
- */
+ /** @deprecated use encoder private options instead */
+ attribute_deprecated
int frame_skip_cmp;
+#endif /* FF_API_PRIVATE_OPT */
/**
* trellis RD quantization
*/
int trellis;
- /**
- * - encoding: Set by user.
- * - decoding: unused
- */
+#if FF_API_PRIVATE_OPT
+ /** @deprecated use encoder private options instead */
+ attribute_deprecated
int min_prediction_order;
- /**
- * - encoding: Set by user.
- * - decoding: unused
- */
+ /** @deprecated use encoder private options instead */
+ attribute_deprecated
int max_prediction_order;
- /**
- * GOP timecode frame start number, in non drop frame format
- * - encoding: Set by user.
- * - decoding: unused
- */
+ /** @deprecated use encoder private options instead */
+ attribute_deprecated
int64_t timecode_frame_start;
+#endif
#if FF_API_RTP_CALLBACK
/**
void (*rtp_callback)(struct AVCodecContext *avctx, void *data, int size, int mb_nb);
#endif
+#if FF_API_PRIVATE_OPT
+ /** @deprecated use encoder private options instead */
+ attribute_deprecated
int rtp_payload_size; /* The size of the RTP payload: the coder will */
/* do its best to deliver a chunk with size */
/* below rtp_payload_size, the chunk will start */
/* with a start code on some codecs like H.263. */
/* This doesn't take account of any particular */
/* headers inside the transmitted RTP payload. */
+#endif
+#if FF_API_STAT_BITS
/* statistics, used for 2-pass encoding */
+ attribute_deprecated
int mv_bits;
+ attribute_deprecated
int header_bits;
+ attribute_deprecated
int i_tex_bits;
+ attribute_deprecated
int p_tex_bits;
+ attribute_deprecated
int i_count;
+ attribute_deprecated
int p_count;
+ attribute_deprecated
int skip_count;
+ attribute_deprecated
int misc_bits;
- /**
- * number of bits used for the previously encoded frame
- * - encoding: Set by libavcodec.
- * - decoding: unused
- */
+ /** @deprecated this field is unused */
+ attribute_deprecated
int frame_bits;
+#endif
/**
* pass1 encoding statistics output buffer
#define FF_BUG_TRUNCATED 16384
/**
- * strictly follow the standard (MPEG4, ...).
+ * strictly follow the standard (MPEG-4, ...).
* - encoding: Set by user.
* - decoding: Set by user.
* Setting this to STRICT or higher means the encoder and decoder will
*/
attribute_deprecated
int debug_mv;
-#define FF_DEBUG_VIS_MV_P_FOR 0x00000001 //visualize forward predicted MVs of P frames
-#define FF_DEBUG_VIS_MV_B_FOR 0x00000002 //visualize forward predicted MVs of B frames
-#define FF_DEBUG_VIS_MV_B_BACK 0x00000004 //visualize backward predicted MVs of B frames
+#define FF_DEBUG_VIS_MV_P_FOR 0x00000001 // visualize forward predicted MVs of P-frames
+#define FF_DEBUG_VIS_MV_B_FOR 0x00000002 // visualize forward predicted MVs of B-frames
+#define FF_DEBUG_VIS_MV_B_BACK 0x00000004 // visualize backward predicted MVs of B-frames
#endif
/**
#define AV_EF_EXPLODE (1<<3)
/**
- * opaque 64bit number (generally a PTS) that will be reordered and
+ * opaque 64-bit number (generally a PTS) that will be reordered and
* output in AVFrame.reordered_opaque
* - encoding: unused
* - decoding: Set by user.
int (*execute2)(struct AVCodecContext *c, int (*func)(struct AVCodecContext *c2, void *arg, int jobnr, int threadnr), void *arg2, int *ret, int count);
/**
- * noise vs. sse weight for the nsse comparsion function
+ * noise vs. sse weight for the nsse comparison function
* - encoding: Set by user.
* - decoding: unused
*/
#define FF_PROFILE_H264_HIGH 100
#define FF_PROFILE_H264_HIGH_10 110
#define FF_PROFILE_H264_HIGH_10_INTRA (110|FF_PROFILE_H264_INTRA)
+#define FF_PROFILE_H264_MULTIVIEW_HIGH 118
#define FF_PROFILE_H264_HIGH_422 122
#define FF_PROFILE_H264_HIGH_422_INTRA (122|FF_PROFILE_H264_INTRA)
+#define FF_PROFILE_H264_STEREO_HIGH 128
#define FF_PROFILE_H264_HIGH_444 144
#define FF_PROFILE_H264_HIGH_444_PREDICTIVE 244
#define FF_PROFILE_H264_HIGH_444_INTRA (244|FF_PROFILE_H264_INTRA)
#define FF_PROFILE_MPEG4_SIMPLE_STUDIO 14
#define FF_PROFILE_MPEG4_ADVANCED_SIMPLE 15
-#define FF_PROFILE_JPEG2000_CSTREAM_RESTRICTION_0 0
-#define FF_PROFILE_JPEG2000_CSTREAM_RESTRICTION_1 1
-#define FF_PROFILE_JPEG2000_CSTREAM_NO_RESTRICTION 2
+#define FF_PROFILE_JPEG2000_CSTREAM_RESTRICTION_0 1
+#define FF_PROFILE_JPEG2000_CSTREAM_RESTRICTION_1 2
+#define FF_PROFILE_JPEG2000_CSTREAM_NO_RESTRICTION 32768
#define FF_PROFILE_JPEG2000_DCINEMA_2K 3
#define FF_PROFILE_JPEG2000_DCINEMA_4K 4
#define FF_PROFILE_HEVC_MAIN 1
#define FF_PROFILE_HEVC_MAIN_10 2
#define FF_PROFILE_HEVC_MAIN_STILL_PICTURE 3
+#define FF_PROFILE_HEVC_REXT 4
/**
* level
#define FF_LEVEL_UNKNOWN -99
/**
- *
* - encoding: unused
* - decoding: Set by user.
*/
enum AVDiscard skip_loop_filter;
/**
- *
* - encoding: unused
* - decoding: Set by user.
*/
enum AVDiscard skip_idct;
/**
- *
* - encoding: unused
* - decoding: Set by user.
*/
* - decoding: For codecs that store a framerate value in the compressed
* bitstream, the decoder may export it here. { 0, 1} when
* unknown.
- * - encoding: unused
+ * - encoding: May be used to signal the framerate of CFR content to an
+ * encoder.
*/
AVRational framerate;
AVPacketSideData *coded_side_data;
int nb_coded_side_data;
+ /**
+ * A reference to the AVHWFramesContext describing the input (for encoding)
+ * or output (decoding) frames. The reference is set by the caller and
+ * afterwards owned (and freed) by libavcodec.
+ *
+ * - decoding: This field should be set by the caller from the get_format()
+ * callback. The previous reference (if any) will always be
+ * unreffed by libavcodec before the get_format() call.
+ *
+ * If the default get_buffer2() is used with a hwaccel pixel
+ * format, then this AVHWFramesContext will be used for
+ * allocating the frame buffers.
+ *
+ * - encoding: For hardware encoders configured to use a hwaccel pixel
+ * format, this field should be set by the caller to a reference
+ * to the AVHWFramesContext describing input frames.
+ * AVHWFramesContext.format must be equal to
+ * AVCodecContext.pix_fmt.
+ *
+ * This field should be set before avcodec_open2() is called.
+ */
+ AVBufferRef *hw_frames_ctx;
} AVCodecContext;
/**
int *got_packet_ptr);
int (*decode)(AVCodecContext *, void *outdata, int *outdata_size, AVPacket *avpkt);
int (*close)(AVCodecContext *);
+ /**
+ * Encode API with decoupled packet/frame dataflow. The API is the
+ * same as the avcodec_ prefixed APIs (avcodec_send_frame() etc.), except
+ * that:
+ * - never called if the codec is closed or the wrong type,
+ * - if AV_CODEC_CAP_DELAY is not set, drain frames are never sent,
+ * - only one drain frame is ever passed down,
+ */
+ int (*send_frame)(AVCodecContext *avctx, const AVFrame *frame);
+ int (*receive_packet)(AVCodecContext *avctx, AVPacket *avpkt);
+
+ /**
+ * Decode API with decoupled packet/frame dataflow. This function is called
+ * to get one output frame. It should call ff_decode_get_packet() to obtain
+ * input data.
+ */
+ int (*receive_frame)(AVCodecContext *avctx, AVFrame *frame);
/**
* Flush buffers.
* Will be called when seeking
* See FF_CODEC_CAP_* in internal.h
*/
int caps_internal;
+
+ /**
+ * Decoding only, a comma-separated list of bitstream filters to apply to
+ * packets before decoding.
+ */
+ const char *bsfs;
} AVCodec;
/**
* AVCodecInternal.hwaccel_priv_data.
*/
int priv_data_size;
+
+ /**
+ * Internal hwaccel capabilities.
+ */
+ int caps_internal;
} AVHWAccel;
/**
/**
* 0 terminated ASS/SSA compatible event line.
- * The pressentation of this is unaffected by the other values in this
+ * The presentation of this is unaffected by the other values in this
* struct.
*/
char *ass;
int64_t pts; ///< Same as packet pts, in AV_TIME_BASE
} AVSubtitle;
+/**
+ * This struct describes the properties of an encoded stream.
+ *
+ * sizeof(AVCodecParameters) is not a part of the public ABI, this struct must
+ * be allocated with avcodec_parameters_alloc() and freed with
+ * avcodec_parameters_free().
+ */
+typedef struct AVCodecParameters {
+ /**
+ * General type of the encoded data.
+ */
+ enum AVMediaType codec_type;
+ /**
+ * Specific type of the encoded data (the codec used).
+ */
+ enum AVCodecID codec_id;
+ /**
+ * Additional information about the codec (corresponds to the AVI FOURCC).
+ */
+ uint32_t codec_tag;
+
+ /**
+ * Extra binary data needed for initializing the decoder, codec-dependent.
+ *
+ * Must be allocated with av_malloc() and will be freed by
+ * avcodec_parameters_free(). The allocated size of extradata must be at
+ * least extradata_size + AV_INPUT_BUFFER_PADDING_SIZE, with the padding
+ * bytes zeroed.
+ */
+ uint8_t *extradata;
+ /**
+ * Size of the extradata content in bytes.
+ */
+ int extradata_size;
+
+ /**
+ * - video: the pixel format, the value corresponds to enum AVPixelFormat.
+ * - audio: the sample format, the value corresponds to enum AVSampleFormat.
+ */
+ int format;
+
+ /**
+ * The average bitrate of the encoded data (in bits per second).
+ */
+ int bit_rate;
+
+ int bits_per_coded_sample;
+
+ /**
+ * Codec-specific bitstream restrictions that the stream conforms to.
+ */
+ int profile;
+ int level;
+
+ /**
+ * Video only. The dimensions of the video frame in pixels.
+ */
+ int width;
+ int height;
+
+ /**
+ * Video only. The aspect ratio (width / height) which a single pixel
+ * should have when displayed.
+ *
+ * When the aspect ratio is unknown / undefined, the numerator should be
+ * set to 0 (the denominator may have any value).
+ */
+ AVRational sample_aspect_ratio;
+
+ /**
+ * Video only. The order of the fields in interlaced video.
+ */
+ enum AVFieldOrder field_order;
+
+ /**
+ * Video only. Additional colorspace characteristics.
+ */
+ enum AVColorRange color_range;
+ enum AVColorPrimaries color_primaries;
+ enum AVColorTransferCharacteristic color_trc;
+ enum AVColorSpace color_space;
+ enum AVChromaLocation chroma_location;
+
+ /**
+ * Audio only. The channel layout bitmask. May be 0 if the channel layout is
+ * unknown or unspecified, otherwise the number of bits set must be equal to
+ * the channels field.
+ */
+ uint64_t channel_layout;
+ /**
+ * Audio only. The number of audio channels.
+ */
+ int channels;
+ /**
+ * Audio only. The number of audio samples per second.
+ */
+ int sample_rate;
+ /**
+ * Audio only. The number of bytes per coded audio frame, required by some
+ * formats.
+ *
+ * Corresponds to nBlockAlign in WAVEFORMATEX.
+ */
+ int block_align;
+
+ /**
+ * Audio only. The amount of padding (in samples) inserted by the encoder at
+ * the beginning of the audio. I.e. this number of leading decoded samples
+ * must be discarded by the caller to get the original audio without leading
+ * padding.
+ */
+ int initial_padding;
+ /**
+ * Audio only. The amount of padding (in samples) appended by the encoder to
+ * the end of the audio. I.e. this number of decoded samples must be
+ * discarded by the caller from the end of the stream to get the original
+ * audio without any trailing padding.
+ */
+ int trailing_padding;
+} AVCodecParameters;
+
/**
* If c is NULL, returns the first registered codec,
* if c is non-NULL, returns the next registered codec after c,
* important mainly for encoders, e.g. libx264).
*
* @return An AVCodecContext filled with default values or NULL on failure.
- * @see avcodec_get_context_defaults
*/
AVCodecContext *avcodec_alloc_context3(const AVCodec *codec);
*/
void avcodec_free_context(AVCodecContext **avctx);
+#if FF_API_GET_CONTEXT_DEFAULTS
/**
- * Set the fields of the given AVCodecContext to default values corresponding
- * to the given codec (defaults may be codec-dependent).
- *
- * Do not call this function if a non-NULL codec has been passed
- * to avcodec_alloc_context3() that allocated this AVCodecContext.
- * If codec is non-NULL, it is illegal to call avcodec_open2() with a
- * different codec on this AVCodecContext.
+ * @deprecated This function should not be used, as closing and opening a codec
+ * context multiple time is not supported. A new codec context should be
+ * allocated for each new use.
*/
int avcodec_get_context_defaults3(AVCodecContext *s, const AVCodec *codec);
+#endif
/**
* Get the AVClass for AVCodecContext. It can be used in combination with
*/
const AVClass *avcodec_get_class(void);
+#if FF_API_COPY_CONTEXT
/**
* Copy the settings of the source AVCodecContext into the destination
* AVCodecContext. The resulting destination codec context will be
* avcodec_alloc_context3(), but otherwise uninitialized
* @param src source codec context
* @return AVERROR() on error (e.g. memory allocation error), 0 on success
+ *
+ * @deprecated The semantics of this function are ill-defined and it should not
+ * be used. If you need to transfer the stream parameters from one codec context
+ * to another, use an intermediate AVCodecParameters instance and the
+ * avcodec_parameters_from_context() / avcodec_parameters_to_context()
+ * functions.
*/
+attribute_deprecated
int avcodec_copy_context(AVCodecContext *dest, const AVCodecContext *src);
+#endif
+
+/**
+ * Allocate a new AVCodecParameters and set its fields to default values
+ * (unknown/invalid/0). The returned struct must be freed with
+ * avcodec_parameters_free().
+ */
+AVCodecParameters *avcodec_parameters_alloc(void);
+
+/**
+ * Free an AVCodecParameters instance and everything associated with it and
+ * write NULL to the supplied pointer.
+ */
+void avcodec_parameters_free(AVCodecParameters **par);
+
+/**
+ * Copy the contents of src to dst. Any allocated fields in dst are freed and
+ * replaced with newly allocated duplicates of the corresponding fields in src.
+ *
+ * @return >= 0 on success, a negative AVERROR code on failure.
+ */
+int avcodec_parameters_copy(AVCodecParameters *dst, const AVCodecParameters *src);
+
+/**
+ * Fill the parameters struct based on the values from the supplied codec
+ * context. Any allocated fields in par are freed and replaced with duplicates
+ * of the corresponding fields in codec.
+ *
+ * @return >= 0 on success, a negative AVERROR code on failure
+ */
+int avcodec_parameters_from_context(AVCodecParameters *par,
+ const AVCodecContext *codec);
+
+/**
+ * Fill the codec context based on the values from the supplied codec
+ * parameters. Any allocated fields in codec that have a corresponding field in
+ * par are freed and replaced with duplicates of the corresponding field in par.
+ * Fields in codec that do not have a counterpart in par are not touched.
+ *
+ * @return >= 0 on success, a negative AVERROR code on failure.
+ */
+int avcodec_parameters_to_context(AVCodecContext *codec,
+ const AVCodecParameters *par);
/**
* Initialize the AVCodecContext to use the given AVCodec. Prior to using this
* @warning This function is not thread safe!
*
* @note Always call this function before using decoding routines (such as
- * @ref avcodec_decode_video2()).
+ * @ref avcodec_receive_frame()).
*
* @code
* avcodec_register_all();
* @param avctx The context to initialize.
* @param codec The codec to open this context for. If a non-NULL codec has been
* previously passed to avcodec_alloc_context3() or
- * avcodec_get_context_defaults3() for this context, then this
- * parameter MUST be either NULL or equal to the previously passed
- * codec.
+ * for this context, then this parameter MUST be either NULL or
+ * equal to the previously passed codec.
* @param options A dictionary filled with AVCodecContext and codec-private options.
* On return this object will be filled with options that were not found.
*
* (but not the AVCodecContext itself).
*
* Calling this function on an AVCodecContext that hasn't been opened will free
- * the codec-specific data allocated in avcodec_alloc_context3() /
- * avcodec_get_context_defaults3() with a non-NULL codec. Subsequent calls will
- * do nothing.
+ * the codec-specific data allocated in avcodec_alloc_context3() with a non-NULL
+ * codec. Subsequent calls will do nothing.
+ *
+ * @note Do not use this function. Use avcodec_free_context() to destroy a
+ * codec context (either open or closed). Opening and closing a codec context
+ * multiple times is not supported anymore -- use multiple codec contexts
+ * instead.
*/
int avcodec_close(AVCodecContext *avctx);
* @see av_packet_alloc
* @see av_packet_ref
*/
-AVPacket *av_packet_clone(AVPacket *src);
+AVPacket *av_packet_clone(const AVPacket *src);
/**
* Free the packet, if the packet is reference counted, it will be
* unreferenced first.
*
- * @param packet packet to be freed. The pointer will be set to NULL.
+ * @param pkt packet to be freed. The pointer will be set to NULL.
* @note passing NULL is a no-op.
*/
void av_packet_free(AVPacket **pkt);
*
* @return 0 on success, a negative AVERROR on error.
*/
-int av_packet_ref(AVPacket *dst, AVPacket *src);
+int av_packet_ref(AVPacket *dst, const AVPacket *src);
/**
* Wipe the packet.
* @param src Source packet
*
* @return 0 on success AVERROR on failure.
- *
*/
int av_packet_copy_props(AVPacket *dst, const AVPacket *src);
* @return A negative error code is returned if an error occurred during
* decoding, otherwise the number of bytes consumed from the input
* AVPacket is returned.
+ *
+* @deprecated Use avcodec_send_packet() and avcodec_receive_frame().
*/
+attribute_deprecated
int avcodec_decode_audio4(AVCodecContext *avctx, AVFrame *frame,
int *got_frame_ptr, AVPacket *avpkt);
* next call to this function or until closing or flushing the
* decoder. The caller may not write to it.
*
- * @param[in] avpkt The input AVpacket containing the input buffer.
+ * @param[in] avpkt The input AVPacket containing the input buffer.
* You can create such packet with av_init_packet() and by then setting
* data and size, some decoders might in addition need other fields like
* flags&AV_PKT_FLAG_KEY. All decoders are designed to use the least
* @param[in,out] got_picture_ptr Zero if no frame could be decompressed, otherwise, it is nonzero.
* @return On error a negative value is returned, otherwise the number of bytes
* used or zero if no frame could be decompressed.
+ *
+ * @deprecated Use avcodec_send_packet() and avcodec_receive_frame().
*/
+attribute_deprecated
int avcodec_decode_video2(AVCodecContext *avctx, AVFrame *picture,
int *got_picture_ptr,
AVPacket *avpkt);
int *got_sub_ptr,
AVPacket *avpkt);
+/**
+ * Supply raw packet data as input to a decoder.
+ *
+ * Internally, this call will copy relevant AVCodecContext fields, which can
+ * influence decoding per-packet, and apply them when the packet is actually
+ * decoded. (For example AVCodecContext.skip_frame, which might direct the
+ * decoder to drop the frame contained by the packet sent with this function.)
+ *
+ * @warning The input buffer, avpkt->data must be AV_INPUT_BUFFER_PADDING_SIZE
+ * larger than the actual read bytes because some optimized bitstream
+ * readers read 32 or 64 bits at once and could read over the end.
+ *
+ * @warning Do not mix this API with the legacy API (like avcodec_decode_video2())
+ * on the same AVCodecContext. It will return unexpected results now
+ * or in future libavcodec versions.
+ *
+ * @note The AVCodecContext MUST have been opened with @ref avcodec_open2()
+ * before packets may be fed to the decoder.
+ *
+ * @param avctx codec context
+ * @param[in] avpkt The input AVPacket. Usually, this will be a single video
+ * frame, or several complete audio frames.
+ * Ownership of the packet remains with the caller, and the
+ * decoder will not write to the packet. The decoder may create
+ * a reference to the packet data (or copy it if the packet is
+ * not reference-counted).
+ * Unlike with older APIs, the packet is always fully consumed,
+ * and if it contains multiple frames (e.g. some audio codecs),
+ * will require you to call avcodec_receive_frame() multiple
+ * times afterwards before you can send a new packet.
+ * It can be NULL (or an AVPacket with data set to NULL and
+ * size set to 0); in this case, it is considered a flush
+ * packet, which signals the end of the stream. Sending the
+ * first flush packet will return success. Subsequent ones are
+ * unnecessary and will return AVERROR_EOF. If the decoder
+ * still has frames buffered, it will return them after sending
+ * a flush packet.
+ *
+ * @return 0 on success, otherwise negative error code:
+ * AVERROR(EAGAIN): input is not accepted right now - the packet must be
+ * resent after trying to read output
+ * AVERROR_EOF: the decoder has been flushed, and no new packets can
+ * be sent to it (also returned if more than 1 flush
+ * packet is sent)
+ * AVERROR(EINVAL): codec not opened, it is an encoder, or requires flush
+ * AVERROR(ENOMEM): failed to add packet to internal queue, or similar
+ * other errors: legitimate decoding errors
+ */
+int avcodec_send_packet(AVCodecContext *avctx, const AVPacket *avpkt);
+
+/**
+ * Return decoded output data from a decoder.
+ *
+ * @param avctx codec context
+ * @param frame This will be set to a reference-counted video or audio
+ * frame (depending on the decoder type) allocated by the
+ * decoder. Note that the function will always call
+ * av_frame_unref(frame) before doing anything else.
+ *
+ * @return
+ * 0: success, a frame was returned
+ * AVERROR(EAGAIN): output is not available right now - user must try
+ * to send new input
+ * AVERROR_EOF: the decoder has been fully flushed, and there will be
+ * no more output frames
+ * AVERROR(EINVAL): codec not opened, or it is an encoder
+ * other negative values: legitimate decoding errors
+ */
+int avcodec_receive_frame(AVCodecContext *avctx, AVFrame *frame);
+
+/**
+ * Supply a raw video or audio frame to the encoder. Use avcodec_receive_packet()
+ * to retrieve buffered output packets.
+ *
+ * @param avctx codec context
+ * @param[in] frame AVFrame containing the raw audio or video frame to be encoded.
+ * Ownership of the frame remains with the caller, and the
+ * encoder will not write to the frame. The encoder may create
+ * a reference to the frame data (or copy it if the frame is
+ * not reference-counted).
+ * It can be NULL, in which case it is considered a flush
+ * packet. This signals the end of the stream. If the encoder
+ * still has packets buffered, it will return them after this
+ * call. Once flushing mode has been entered, additional flush
+ * packets are ignored, and sending frames will return
+ * AVERROR_EOF.
+ *
+ * For audio:
+ * If AV_CODEC_CAP_VARIABLE_FRAME_SIZE is set, then each frame
+ * can have any number of samples.
+ * If it is not set, frame->nb_samples must be equal to
+ * avctx->frame_size for all frames except the last.
+ * The final frame may be smaller than avctx->frame_size.
+ * @return 0 on success, otherwise negative error code:
+ * AVERROR(EAGAIN): input is not accepted right now - the frame must be
+ * resent after trying to read output packets
+ * AVERROR_EOF: the encoder has been flushed, and no new frames can
+ * be sent to it
+ * AVERROR(EINVAL): codec not opened, refcounted_frames not set, it is a
+ * decoder, or requires flush
+ * AVERROR(ENOMEM): failed to add packet to internal queue, or similar
+ * other errors: legitimate decoding errors
+ */
+int avcodec_send_frame(AVCodecContext *avctx, const AVFrame *frame);
+
+/**
+ * Read encoded data from the encoder.
+ *
+ * @param avctx codec context
+ * @param avpkt This will be set to a reference-counted packet allocated by the
+ * encoder. Note that the function will always call
+ * av_frame_unref(frame) before doing anything else.
+ * @return 0 on success, otherwise negative error code:
+ * AVERROR(EAGAIN): output is not available right now - user must try
+ * to send input
+ * AVERROR_EOF: the encoder has been fully flushed, and there will be
+ * no more output packets
+ * AVERROR(EINVAL): codec not opened, or it is an encoder
+ * other errors: legitimate decoding errors
+ */
+int avcodec_receive_packet(AVCodecContext *avctx, AVPacket *avpkt);
+
+
/**
* @defgroup lavc_parsing Frame parsing
* @{
* value of got_packet_ptr is undefined and should
* not be used.
* @return 0 on success, negative error code on failure
+ *
+ * @deprecated use avcodec_send_frame()/avcodec_receive_packet() instead
*/
+attribute_deprecated
int avcodec_encode_audio2(AVCodecContext *avctx, AVPacket *avpkt,
const AVFrame *frame, int *got_packet_ptr);
* value of got_packet_ptr is undefined and should
* not be used.
* @return 0 on success, negative error code on failure
+ *
+ * @deprecated use avcodec_send_frame()/avcodec_receive_packet() instead
*/
+attribute_deprecated
int avcodec_encode_video2(AVCodecContext *avctx, AVPacket *avpkt,
const AVFrame *frame, int *got_packet_ptr);
*/
const char *av_get_profile_name(const AVCodec *codec, int profile);
+/**
+ * Return a name for the specified profile, if available.
+ *
+ * @param codec_id the ID of the codec to which the requested profile belongs
+ * @param profile the profile value for which a name is requested
+ * @return A name for the profile if found, NULL otherwise.
+ *
+ * @note unlike av_get_profile_name(), which searches a list of profiles
+ * supported by a specific decoder or encoder implementation, this
+ * function searches the list of profiles from the AVCodecDescriptor
+ */
+const char *avcodec_profile_name(enum AVCodecID codec_id, int profile);
+
int avcodec_default_execute(AVCodecContext *c, int (*func)(AVCodecContext *c2, void *arg2),void *arg, int *ret, int count, int size);
int avcodec_default_execute2(AVCodecContext *c, int (*func)(AVCodecContext *c2, void *arg2, int, int),void *arg, int *ret, int count);
//FIXME func typedef
*/
int av_get_audio_frame_duration(AVCodecContext *avctx, int frame_bytes);
+/**
+ * This function is the same as av_get_audio_frame_duration(), except it works
+ * with AVCodecParameters instead of an AVCodecContext.
+ */
+int av_get_audio_frame_duration2(AVCodecParameters *par, int frame_bytes);
+#if FF_API_OLD_BSF
typedef struct AVBitStreamFilterContext {
void *priv_data;
struct AVBitStreamFilter *filter;
AVCodecParserContext *parser;
struct AVBitStreamFilterContext *next;
} AVBitStreamFilterContext;
+#endif
+
+typedef struct AVBSFInternal AVBSFInternal;
+
+/**
+ * The bitstream filter state.
+ *
+ * This struct must be allocated with av_bsf_alloc() and freed with
+ * av_bsf_free().
+ *
+ * The fields in the struct will only be changed (by the caller or by the
+ * filter) as described in their documentation, and are to be considered
+ * immutable otherwise.
+ */
+typedef struct AVBSFContext {
+ /**
+ * A class for logging and AVOptions
+ */
+ const AVClass *av_class;
+
+ /**
+ * The bitstream filter this context is an instance of.
+ */
+ const struct AVBitStreamFilter *filter;
+
+ /**
+ * Opaque libavcodec internal data. Must not be touched by the caller in any
+ * way.
+ */
+ AVBSFInternal *internal;
+
+ /**
+ * Opaque filter-specific private data. If filter->priv_class is non-NULL,
+ * this is an AVOptions-enabled struct.
+ */
+ void *priv_data;
+
+ /**
+ * Parameters of the input stream. This field is allocated in
+ * av_bsf_alloc(), it needs to be filled by the caller before
+ * av_bsf_init().
+ */
+ AVCodecParameters *par_in;
+
+ /**
+ * Parameters of the output stream. This field is allocated in
+ * av_bsf_alloc(), it is set by the filter in av_bsf_init().
+ */
+ AVCodecParameters *par_out;
+
+ /**
+ * The timebase used for the timestamps of the input packets. Set by the
+ * caller before av_bsf_init().
+ */
+ AVRational time_base_in;
+ /**
+ * The timebase used for the timestamps of the output packets. Set by the
+ * filter in av_bsf_init().
+ */
+ AVRational time_base_out;
+} AVBSFContext;
typedef struct AVBitStreamFilter {
const char *name;
+
+ /**
+ * A list of codec ids supported by the filter, terminated by
+ * AV_CODEC_ID_NONE.
+ * May be NULL, in that case the bitstream filter works with any codec id.
+ */
+ const enum AVCodecID *codec_ids;
+
+ /**
+ * A class for the private data, used to declare bitstream filter private
+ * AVOptions. This field is NULL for bitstream filters that do not declare
+ * any options.
+ *
+ * If this field is non-NULL, the first member of the filter private data
+ * must be a pointer to AVClass, which will be set by libavcodec generic
+ * code to this class.
+ */
+ const AVClass *priv_class;
+
+ /*****************************************************************
+ * No fields below this line are part of the public API. They
+ * may not be used outside of libavcodec and can be changed and
+ * removed at will.
+ * New public fields should be added right above.
+ *****************************************************************
+ */
+
int priv_data_size;
- int (*filter)(AVBitStreamFilterContext *bsfc,
- AVCodecContext *avctx, const char *args,
- uint8_t **poutbuf, int *poutbuf_size,
- const uint8_t *buf, int buf_size, int keyframe);
- void (*close)(AVBitStreamFilterContext *bsfc);
- struct AVBitStreamFilter *next;
+ int (*init)(AVBSFContext *ctx);
+ int (*filter)(AVBSFContext *ctx, AVPacket *pkt);
+ void (*close)(AVBSFContext *ctx);
} AVBitStreamFilter;
+#if FF_API_OLD_BSF
+/**
+ * @deprecated the old bitstream filtering API (using AVBitStreamFilterContext)
+ * is deprecated. Use the new bitstream filtering API (using AVBSFContext).
+ */
+attribute_deprecated
void av_register_bitstream_filter(AVBitStreamFilter *bsf);
+attribute_deprecated
AVBitStreamFilterContext *av_bitstream_filter_init(const char *name);
+attribute_deprecated
int av_bitstream_filter_filter(AVBitStreamFilterContext *bsfc,
AVCodecContext *avctx, const char *args,
uint8_t **poutbuf, int *poutbuf_size,
const uint8_t *buf, int buf_size, int keyframe);
+attribute_deprecated
void av_bitstream_filter_close(AVBitStreamFilterContext *bsf);
-
+attribute_deprecated
AVBitStreamFilter *av_bitstream_filter_next(const AVBitStreamFilter *f);
+#endif
+
+/**
+ * @return a bitstream filter with the specified name or NULL if no such
+ * bitstream filter exists.
+ */
+const AVBitStreamFilter *av_bsf_get_by_name(const char *name);
+
+/**
+ * Iterate over all registered bitstream filters.
+ *
+ * @param opaque a pointer where libavcodec will store the iteration state. Must
+ * point to NULL to start the iteration.
+ *
+ * @return the next registered bitstream filter or NULL when the iteration is
+ * finished
+ */
+const AVBitStreamFilter *av_bsf_next(void **opaque);
+
+/**
+ * Allocate a context for a given bitstream filter. The caller must fill in the
+ * context parameters as described in the documentation and then call
+ * av_bsf_init() before sending any data to the filter.
+ *
+ * @param filter the filter for which to allocate an instance.
+ * @param ctx a pointer into which the pointer to the newly-allocated context
+ * will be written. It must be freed with av_bsf_free() after the
+ * filtering is done.
+ *
+ * @return 0 on success, a negative AVERROR code on failure
+ */
+int av_bsf_alloc(const AVBitStreamFilter *filter, AVBSFContext **ctx);
+
+/**
+ * Prepare the filter for use, after all the parameters and options have been
+ * set.
+ */
+int av_bsf_init(AVBSFContext *ctx);
+
+/**
+ * Submit a packet for filtering.
+ *
+ * After sending each packet, the filter must be completely drained by calling
+ * av_bsf_receive_packet() repeatedly until it returns AVERROR(EAGAIN) or
+ * AVERROR_EOF.
+ *
+ * @param pkt the packet to filter. The bitstream filter will take ownership of
+ * the packet and reset the contents of pkt. pkt is not touched if an error occurs.
+ * This parameter may be NULL, which signals the end of the stream (i.e. no more
+ * packets will be sent). That will cause the filter to output any packets it
+ * may have buffered internally.
+ *
+ * @return 0 on success, a negative AVERROR on error.
+ */
+int av_bsf_send_packet(AVBSFContext *ctx, AVPacket *pkt);
+
+/**
+ * Retrieve a filtered packet.
+ *
+ * @param[out] pkt this struct will be filled with the contents of the filtered
+ * packet. It is owned by the caller and must be freed using
+ * av_packet_unref() when it is no longer needed.
+ * This parameter should be "clean" (i.e. freshly allocated
+ * with av_packet_alloc() or unreffed with av_packet_unref())
+ * when this function is called. If this function returns
+ * successfully, the contents of pkt will be completely
+ * overwritten by the returned data. On failure, pkt is not
+ * touched.
+ *
+ * @return 0 on success. AVERROR(EAGAIN) if more packets need to be sent to the
+ * filter (using av_bsf_send_packet()) to get more output. AVERROR_EOF if there
+ * will be no further output from the filter. Another negative AVERROR value if
+ * an error occurs.
+ *
+ * @note one input packet may result in several output packets, so after sending
+ * a packet with av_bsf_send_packet(), this function needs to be called
+ * repeatedly until it stops returning 0. It is also possible for a filter to
+ * output fewer packets than were sent to it, so this function may return
+ * AVERROR(EAGAIN) immediately after a successful av_bsf_send_packet() call.
+ */
+int av_bsf_receive_packet(AVBSFContext *ctx, AVPacket *pkt);
+
+/**
+ * Free a bitstream filter context and everything associated with it; write NULL
+ * into the supplied pointer.
+ */
+void av_bsf_free(AVBSFContext **ctx);
+
+/**
+ * Get the AVClass for AVBSFContext. It can be used in combination with
+ * AV_OPT_SEARCH_FAKE_OBJ for examining options.
+ *
+ * @see av_opt_find().
+ */
+const AVClass *av_bsf_get_class(void);
/* memory */
*
* Same behaviour av_fast_malloc but the buffer has additional
* AV_INPUT_PADDING_SIZE at the end which will always memset to 0.
- *
*/
void av_fast_padded_malloc(void *ptr, unsigned int *size, size_t min_size);
* a pointer to an AVClass struct
* @param[in] feature string containing the name of the missing feature
* @param[in] want_sample indicates if samples are wanted which exhibit this feature.
- * If want_sample is non-zero, additional verbage will be added to the log
+ * If want_sample is non-zero, additional verbiage will be added to the log
* message which tells the user how to report samples to the development
* mailing list.
* @deprecated Use avpriv_report_missing_feature() instead.
projects / ffmpeg / blobdiff