#include <errno.h>
#include "libavutil/samplefmt.h"
#include "libavutil/avutil.h"
+#include "libavutil/buffer.h"
#include "libavutil/cpu.h"
#include "libavutil/dict.h"
+#include "libavutil/frame.h"
#include "libavutil/log.h"
#include "libavutil/pixfmt.h"
#include "libavutil/rational.h"
* If you add a codec ID to this list, add it so that
* 1. no value of a existing codec ID changes (that would break ABI),
* 2. it is as close as possible to similar codecs.
+ *
+ * After adding new codec IDs, do not forget to add an entry to the codec
+ * descriptor list and bump libavcodec minor version.
*/
enum AVCodecID {
AV_CODEC_ID_NONE,
AV_CODEC_ID_MSZH,
AV_CODEC_ID_ZLIB,
AV_CODEC_ID_QTRLE,
- AV_CODEC_ID_SNOW,
AV_CODEC_ID_TSCC,
AV_CODEC_ID_ULTI,
AV_CODEC_ID_QDRAW,
AV_CODEC_ID_TSCC2,
AV_CODEC_ID_MTS2,
AV_CODEC_ID_CLLC,
+ AV_CODEC_ID_MSS2,
+ AV_CODEC_ID_VP9,
/* various PCM "codecs" */
AV_CODEC_ID_FIRST_AUDIO = 0x10000, ///< A dummy id pointing at the start of audio codecs
AV_CODEC_ID_RALF,
AV_CODEC_ID_IAC,
AV_CODEC_ID_ILBC,
+ AV_CODEC_ID_OPUS,
+ AV_CODEC_ID_COMFORT_NOISE,
+ AV_CODEC_ID_TAK,
/* subtitle codecs */
AV_CODEC_ID_FIRST_SUBTITLE = 0x17000, ///< A dummy ID pointing at the start of subtitle codecs.
AV_CODEC_ID_MPEG4SYSTEMS = 0x20001, /**< _FAKE_ codec to indicate a MPEG-4 Systems
* stream (only used by libavformat) */
AV_CODEC_ID_FFMETADATA = 0x21000, ///< Dummy codec for streams containing only metadata information.
-
-#if FF_API_CODEC_ID
-#include "old_codec_ids.h"
-#endif
};
-#if FF_API_CODEC_ID
-#define CodecID AVCodecID
-#endif
-
/**
* This struct describes the properties of a single codec described by an
* AVCodecID.
* Video codecs only.
*/
#define AV_CODEC_PROP_INTRA_ONLY (1 << 0)
-
-#if FF_API_OLD_DECODE_AUDIO
-/* in bytes */
-#define AVCODEC_MAX_AUDIO_FRAME_SIZE 192000 // 1 second of 48khz 32bit audio
-#endif
+/**
+ * Codec supports lossy compression. Audio and video codecs only.
+ * @note a codec may support both lossy and lossless
+ * compression modes
+ */
+#define AV_CODEC_PROP_LOSSY (1 << 1)
+/**
+ * Codec supports lossless compression. Audio and video codecs only.
+ */
+#define AV_CODEC_PROP_LOSSLESS (1 << 2)
/**
* @ingroup lavc_decoding
ME_X1, ///< reserved for experiments
ME_HEX, ///< hexagon based search
ME_UMH, ///< uneven multi-hexagon search
- ME_ITER, ///< iterative search
ME_TESA, ///< transformed exhaustive search algorithm
};
Note: Not everything is supported yet.
*/
+/**
+ * Allow decoders to produce frames with data planes that are not aligned
+ * to CPU requirements (e.g. due to cropping).
+ */
+#define CODEC_FLAG_UNALIGNED 0x0001
#define CODEC_FLAG_QSCALE 0x0002 ///< Use fixed qscale.
#define CODEC_FLAG_4MV 0x0004 ///< 4 MV per MB allowed / advanced prediction for H.263.
#define CODEC_FLAG_QPEL 0x0010 ///< Use qpel MC.
#define CODEC_FLAG2_FAST 0x00000001 ///< Allow non spec compliant speedup tricks.
#define CODEC_FLAG2_NO_OUTPUT 0x00000004 ///< Skip bitstream encoding.
#define CODEC_FLAG2_LOCAL_HEADER 0x00000008 ///< Place global headers at every keyframe instead of in extradata.
-#if FF_API_MPV_GLOBAL_OPTS
-#define CODEC_FLAG_CBP_RD 0x04000000 ///< Use rate distortion optimization for cbp.
-#define CODEC_FLAG_QP_RD 0x08000000 ///< Use rate distortion optimization for qp selectioon.
-#define CODEC_FLAG2_STRICT_GOP 0x00000002 ///< Strictly enforce GOP size.
-#define CODEC_FLAG2_SKIP_RD 0x00004000 ///< RD optimal MB level residual skipping
-#endif
+#define CODEC_FLAG2_IGNORE_CROP 0x00010000 ///< Discard cropping information from SPS.
+
#define CODEC_FLAG2_CHUNKS 0x00008000 ///< Input bitstream might be truncated at a packet boundaries instead of only at frame boundaries.
/* Unsupported options :
#define FF_QSCALE_TYPE_H264 2
#define FF_QSCALE_TYPE_VP56 3
+#if FF_API_GET_BUFFER
#define FF_BUFFER_TYPE_INTERNAL 1
#define FF_BUFFER_TYPE_USER 2 ///< direct rendering buffers (image is (de)allocated by user)
#define FF_BUFFER_TYPE_SHARED 4 ///< Buffer from somewhere else; don't deallocate image (data/base), all other tables are not shared.
#define FF_BUFFER_HINTS_READABLE 0x02 // Codec will read from buffer.
#define FF_BUFFER_HINTS_PRESERVE 0x04 // User must not alter buffer content.
#define FF_BUFFER_HINTS_REUSABLE 0x08 // Codec will reuse the buffer (update).
+#endif
+
+/**
+ * The decoder will keep a reference to the frame and may reuse it later.
+ */
+#define AV_GET_BUFFER_FLAG_REF (1 << 0)
/**
* @defgroup lavc_packet AVPacket
AV_PKT_DATA_H263_MB_INFO,
};
+/**
+ * This structure stores compressed data. It is typically exported by demuxers
+ * and then passed as input to decoders, or received as output from encoders and
+ * then passed to muxers.
+ *
+ * For video, it should typically contain one compressed frame. For audio it may
+ * contain several compressed frames.
+ *
+ * AVPacket is one of the few structs in Libav, whose size is a part of public
+ * ABI. Thus it may be allocated on stack and no new fields can be added to it
+ * without libavcodec and libavformat major bump.
+ *
+ * The semantics of data ownership depends on the buf or destruct (deprecated)
+ * fields. If either is set, the packet data is dynamically allocated and is
+ * valid indefinitely until av_free_packet() is called (which in turn calls
+ * av_buffer_unref()/the destruct callback to free the data). If neither is set,
+ * the packet data is typically backed by some static buffer somewhere and is
+ * only valid for a limited time (e.g. until the next read call when demuxing).
+ *
+ * The side data is always allocated with av_malloc() and is freed in
+ * av_free_packet().
+ */
typedef struct AVPacket {
+ /**
+ * A reference to the reference-counted buffer where the packet data is
+ * stored.
+ * May be NULL, then the packet data is not reference-counted.
+ */
+ AVBufferRef *buf;
/**
* Presentation timestamp in AVStream->time_base units; the time at which
* the decompressed packet will be presented to the user.
* Equals next_pts - this_pts in presentation order.
*/
int duration;
+#if FF_API_DESTRUCT_PACKET
+ attribute_deprecated
void (*destruct)(struct AVPacket *);
+ attribute_deprecated
void *priv;
+#endif
int64_t pos; ///< byte position in stream, -1 if unknown
/**
* @}
*/
-/**
- * Audio Video Frame.
- * New fields can be added to the end of AVFRAME with minor version
- * bumps. Removal, reordering and changes to existing fields require
- * a major version bump.
- * sizeof(AVFrame) must not be used outside libav*.
- */
-typedef struct AVFrame {
-#define AV_NUM_DATA_POINTERS 8
- /**
- * pointer to the picture/channel planes.
- * This might be different from the first allocated byte
- * - encoding: Set by user
- * - decoding: set by AVCodecContext.get_buffer()
- */
- uint8_t *data[AV_NUM_DATA_POINTERS];
-
- /**
- * Size, in bytes, of the data for each picture/channel plane.
- *
- * For audio, only linesize[0] may be set. For planar audio, each channel
- * plane must be the same size.
- *
- * - encoding: Set by user
- * - decoding: set by AVCodecContext.get_buffer()
- */
- int linesize[AV_NUM_DATA_POINTERS];
-
- /**
- * pointers to the data planes/channels.
- *
- * For video, this should simply point to data[].
- *
- * For planar audio, each channel has a separate data pointer, and
- * linesize[0] contains the size of each channel buffer.
- * For packed audio, there is just one data pointer, and linesize[0]
- * contains the total size of the buffer for all channels.
- *
- * Note: Both data and extended_data will always be set by get_buffer(),
- * but for planar audio with more channels that can fit in data,
- * extended_data must be used by the decoder in order to access all
- * channels.
- *
- * encoding: unused
- * decoding: set by AVCodecContext.get_buffer()
- */
- uint8_t **extended_data;
-
- /**
- * width and height of the video frame
- * - encoding: unused
- * - decoding: Read by user.
- */
- int width, height;
-
- /**
- * number of audio samples (per channel) described by this frame
- * - encoding: Set by user
- * - decoding: Set by libavcodec
- */
- int nb_samples;
-
- /**
- * format of the frame, -1 if unknown or unset
- * Values correspond to enum PixelFormat for video frames,
- * enum AVSampleFormat for audio)
- * - encoding: unused
- * - decoding: Read by user.
- */
- int format;
-
- /**
- * 1 -> keyframe, 0-> not
- * - encoding: Set by libavcodec.
- * - decoding: Set by libavcodec.
- */
- int key_frame;
-
- /**
- * Picture type of the frame, see ?_TYPE below.
- * - encoding: Set by libavcodec. for coded_picture (and set by user for input).
- * - decoding: Set by libavcodec.
- */
- enum AVPictureType pict_type;
-
- /**
- * pointer to the first allocated byte of the picture. Can be used in get_buffer/release_buffer.
- * This isn't used by libavcodec unless the default get/release_buffer() is used.
- * - encoding:
- * - decoding:
- */
- uint8_t *base[AV_NUM_DATA_POINTERS];
-
- /**
- * sample aspect ratio for the video frame, 0/1 if unknown/unspecified
- * - encoding: unused
- * - decoding: Read by user.
- */
- AVRational sample_aspect_ratio;
-
- /**
- * presentation timestamp in time_base units (time when frame should be shown to user)
- * If AV_NOPTS_VALUE then frame_rate = 1/time_base will be assumed.
- * - encoding: MUST be set by user.
- * - decoding: Set by libavcodec.
- */
- int64_t pts;
-
- /**
- * reordered pts from the last AVPacket that has been input into the decoder
- * - encoding: unused
- * - decoding: Read by user.
- */
- int64_t pkt_pts;
-
- /**
- * dts from the last AVPacket that has been input into the decoder
- * - encoding: unused
- * - decoding: Read by user.
- */
- int64_t pkt_dts;
-
- /**
- * picture number in bitstream order
- * - encoding: set by
- * - decoding: Set by libavcodec.
- */
- int coded_picture_number;
- /**
- * picture number in display order
- * - encoding: set by
- * - decoding: Set by libavcodec.
- */
- int display_picture_number;
-
- /**
- * quality (between 1 (good) and FF_LAMBDA_MAX (bad))
- * - encoding: Set by libavcodec. for coded_picture (and set by user for input).
- * - decoding: Set by libavcodec.
- */
- int quality;
-
- /**
- * is this picture used as reference
- * The values for this are the same as the MpegEncContext.picture_structure
- * variable, that is 1->top field, 2->bottom field, 3->frame/both fields.
- * Set to 4 for delayed, non-reference frames.
- * - encoding: unused
- * - decoding: Set by libavcodec. (before get_buffer() call)).
- */
- int reference;
-
- /**
- * QP table
- * - encoding: unused
- * - decoding: Set by libavcodec.
- */
- int8_t *qscale_table;
- /**
- * QP store stride
- * - encoding: unused
- * - decoding: Set by libavcodec.
- */
- int qstride;
-
- /**
- *
- */
- int qscale_type;
-
- /**
- * mbskip_table[mb]>=1 if MB didn't change
- * stride= mb_width = (width+15)>>4
- * - encoding: unused
- * - decoding: Set by libavcodec.
- */
- uint8_t *mbskip_table;
-
- /**
- * motion vector table
- * @code
- * example:
- * int mv_sample_log2= 4 - motion_subsample_log2;
- * int mb_width= (width+15)>>4;
- * int mv_stride= (mb_width << mv_sample_log2) + 1;
- * motion_val[direction][x + y*mv_stride][0->mv_x, 1->mv_y];
- * @endcode
- * - encoding: Set by user.
- * - decoding: Set by libavcodec.
- */
- int16_t (*motion_val[2])[2];
-
- /**
- * macroblock type table
- * mb_type_base + mb_width + 2
- * - encoding: Set by user.
- * - decoding: Set by libavcodec.
- */
- uint32_t *mb_type;
-
- /**
- * DCT coefficients
- * - encoding: unused
- * - decoding: Set by libavcodec.
- */
- short *dct_coeff;
-
- /**
- * motion reference frame index
- * the order in which these are stored can depend on the codec.
- * - encoding: Set by user.
- * - decoding: Set by libavcodec.
- */
- int8_t *ref_index[2];
-
- /**
- * for some private data of the user
- * - encoding: unused
- * - decoding: Set by user.
- */
- void *opaque;
-
- /**
- * error
- * - encoding: Set by libavcodec. if flags&CODEC_FLAG_PSNR.
- * - decoding: unused
- */
- uint64_t error[AV_NUM_DATA_POINTERS];
-
- /**
- * type of the buffer (to keep track of who has to deallocate data[*])
- * - encoding: Set by the one who allocates it.
- * - decoding: Set by the one who allocates it.
- * Note: User allocated (direct rendering) & internal buffers cannot coexist currently.
- */
- int type;
-
- /**
- * When decoding, this signals how much the picture must be delayed.
- * extra_delay = repeat_pict / (2*fps)
- * - encoding: unused
- * - decoding: Set by libavcodec.
- */
- int repeat_pict;
-
- /**
- * The content of the picture is interlaced.
- * - encoding: Set by user.
- * - decoding: Set by libavcodec. (default 0)
- */
- int interlaced_frame;
-
- /**
- * If the content is interlaced, is top field displayed first.
- * - encoding: Set by user.
- * - decoding: Set by libavcodec.
- */
- int top_field_first;
-
- /**
- * Tell user application that palette has changed from previous frame.
- * - encoding: ??? (no palette-enabled encoder yet)
- * - decoding: Set by libavcodec. (default 0).
- */
- int palette_has_changed;
-
- /**
- * codec suggestion on buffer type if != 0
- * - encoding: unused
- * - decoding: Set by libavcodec. (before get_buffer() call)).
- */
- int buffer_hints;
-
- /**
- * Pan scan.
- * - encoding: Set by user.
- * - decoding: Set by libavcodec.
- */
- AVPanScan *pan_scan;
-
- /**
- * reordered opaque 64bit (generally an integer or a double precision float
- * PTS but can be anything).
- * The user sets AVCodecContext.reordered_opaque to represent the input at
- * that time,
- * the decoder reorders values as needed and sets AVFrame.reordered_opaque
- * to exactly one of the values provided by the user through AVCodecContext.reordered_opaque
- * @deprecated in favor of pkt_pts
- * - encoding: unused
- * - decoding: Read by user.
- */
- int64_t reordered_opaque;
-
- /**
- * hardware accelerator private data (Libav-allocated)
- * - encoding: unused
- * - decoding: Set by libavcodec
- */
- void *hwaccel_picture_private;
-
- /**
- * the AVCodecContext which ff_thread_get_buffer() was last called on
- * - encoding: Set by libavcodec.
- * - decoding: Set by libavcodec.
- */
- struct AVCodecContext *owner;
-
- /**
- * used by multithreading to store frame-specific info
- * - encoding: Set by libavcodec.
- * - decoding: Set by libavcodec.
- */
- void *thread_opaque;
-
- /**
- * log2 of the size of the block which a single vector in motion_val represents:
- * (4->16x16, 3->8x8, 2-> 4x4, 1-> 2x2)
- * - encoding: unused
- * - decoding: Set by libavcodec.
- */
- uint8_t motion_subsample_log2;
-
- /**
- * Sample rate of the audio data.
- *
- * - encoding: unused
- * - decoding: set by get_buffer()
- */
- int sample_rate;
-
- /**
- * Channel layout of the audio data.
- *
- * - encoding: unused
- * - decoding: set by get_buffer()
- */
- uint64_t channel_layout;
-} AVFrame;
-
struct AVCodecInternal;
enum AVFieldOrder {
int log_level_offset;
enum AVMediaType codec_type; /* see AVMEDIA_TYPE_xxx */
- struct AVCodec *codec;
+ const struct AVCodec *codec;
char codec_name[32];
enum AVCodecID codec_id; /* see AV_CODEC_ID_xxx */
*/
unsigned int stream_codec_tag;
-#if FF_API_SUB_ID
- /**
- * @deprecated this field is unused
- */
- attribute_deprecated int sub_id;
-#endif
-
void *priv_data;
/**
int ticks_per_frame;
/**
- * Encoder delay.
+ * Codec delay.
*
* Video:
* Number of frames the decoded output will be delayed relative to the
* encoded input.
*
* Audio:
- * Number of "priming" samples added to the beginning of the stream
- * during encoding. The decoded output will be delayed by this many
- * samples relative to the input to the encoder. Note that this field is
- * purely informational and does not directly affect the pts output by
- * the encoder, which should always be based on the actual presentation
- * time, including any delay.
+ * For encoding, this is the number of "priming" samples added to the
+ * beginning of the stream. The decoded output will be delayed by this
+ * many samples relative to the input to the encoder. Note that this
+ * field is purely informational and does not directly affect the pts
+ * output by the encoder, which should always be based on the actual
+ * presentation time, including any delay.
+ * For decoding, this is the number of samples the decoder needs to
+ * output before the decoder's output is valid. When seeking, you should
+ * start decoding this many samples prior to your desired seek point.
*
* - encoding: Set by libavcodec.
- * - decoding: unused
+ * - decoding: Set by libavcodec.
*/
int delay;
/**
* picture width / height.
* - encoding: MUST be set by user.
- * - decoding: Set by libavcodec.
- * Note: For compatibility it is possible to set this instead of
- * coded_width/height before decoding.
+ * - decoding: May be set by the user before opening the decoder if known e.g.
+ * from the container. Some decoders will require the dimensions
+ * to be set by the caller. During decoding, the decoder may
+ * overwrite those values as required.
*/
int width, height;
/**
- * Bitstream width / height, may be different from width/height.
+ * Bitstream width / height, may be different from width/height e.g. when
+ * the decoded frame is cropped before being output.
* - encoding: unused
- * - decoding: Set by user before init if known. Codec should override / dynamically change if needed.
+ * - decoding: May be set by the user before opening the decoder if known
+ * e.g. from the container. During decoding, the decoder may
+ * overwrite those values as required.
*/
int coded_width, coded_height;
int gop_size;
/**
- * Pixel format, see PIX_FMT_xxx.
+ * Pixel format, see AV_PIX_FMT_xxx.
* May be set by the demuxer if known from headers.
* May be overriden by the decoder if it knows better.
* - encoding: Set by user.
* - decoding: Set by user if known, overridden by libavcodec if known
*/
- enum PixelFormat pix_fmt;
+ enum AVPixelFormat pix_fmt;
/**
* Motion estimation algorithm used for video coding.
* 1 (zero), 2 (full), 3 (log), 4 (phods), 5 (epzs), 6 (x1), 7 (hex),
- * 8 (umh), 9 (iter), 10 (tesa) [7, 8, 10 are x264 specific, 9 is snow specific]
+ * 8 (umh), 10 (tesa) [7, 8, 10 are x264 specific]
* - encoding: MUST be set by user.
* - decoding: unused
*/
* - encoding: unused
* - decoding: Set by user, if not set the native format will be chosen.
*/
- enum PixelFormat (*get_format)(struct AVCodecContext *s, const enum PixelFormat * fmt);
+ enum AVPixelFormat (*get_format)(struct AVCodecContext *s, const enum AVPixelFormat * fmt);
/**
* maximum number of B-frames between non-B-frames
int b_frame_strategy;
-#if FF_API_MPV_GLOBAL_OPTS
- /**
- * luma single coefficient elimination threshold
- * - encoding: Set by user.
- * - decoding: unused
- */
- attribute_deprecated int luma_elim_threshold;
-
- /**
- * chroma single coeff elimination threshold
- * - encoding: Set by user.
- * - decoding: unused
- */
- attribute_deprecated int chroma_elim_threshold;
-#endif
-
/**
* qscale offset between IP and B-frames
* - encoding: Set by user.
#define FF_CMP_VSAD 8
#define FF_CMP_VSSE 9
#define FF_CMP_NSSE 10
-#define FF_CMP_W53 11
-#define FF_CMP_W97 12
#define FF_CMP_DCTMAX 13
#define FF_CMP_DCT264 14
#define FF_CMP_CHROMA 256
*/
int inter_quant_bias;
-#if FF_API_COLOR_TABLE_ID
- /**
- * color table ID
- * - encoding: unused
- * - decoding: Which clrtable should be used for 8bit RGB images.
- * Tables have to be stored somewhere. FIXME
- */
- attribute_deprecated int color_table_id;
-#endif
-
/**
* slice flags
* - encoding: unused
*/
int noise_reduction;
-#if FF_API_INTER_THRESHOLD
- /**
- * @deprecated this field is unused
- */
- attribute_deprecated int inter_threshold;
-#endif
-
-#if FF_API_MPV_GLOBAL_OPTS
- /**
- * @deprecated use mpegvideo private options instead
- */
- attribute_deprecated int quantizer_noise_shaping;
-#endif
-
/**
* Motion estimation threshold below which no motion estimation is
* performed, but instead the user specified motion vectors are used.
/* The following data should not be initialized. */
/**
- * Samples per packet, initialized when calling 'init'.
+ * Number of samples per channel in an audio frame.
+ *
+ * - encoding: set by libavcodec in avcodec_open2(). Each submitted frame
+ * except the last must contain exactly frame_size samples per channel.
+ * May be 0 when the codec has CODEC_CAP_VARIABLE_FRAME_SIZE set, then the
+ * frame size is not restricted.
+ * - decoding: may be set by some decoders to indicate constant frame size
*/
int frame_size;
*/
enum AVSampleFormat request_sample_fmt;
+#if FF_API_GET_BUFFER
/**
* Called at the beginning of each frame to get a buffer for it.
*
*
* Decoders cannot use the buffer after returning from
* avcodec_decode_audio4(), so they will not call release_buffer(), as it
- * is assumed to be released immediately upon return.
+ * is assumed to be released immediately upon return. In some rare cases,
+ * a decoder may need to call get_buffer() more than once in a single
+ * call to avcodec_decode_audio4(). In that case, when get_buffer() is
+ * called again after it has already been called once, the previously
+ * acquired buffer is assumed to be released at that time and may not be
+ * reused by the decoder.
*
* As a convenience, av_samples_get_buffer_size() and
* av_samples_fill_arrays() in libavutil may be used by custom get_buffer()
*
* - encoding: unused
* - decoding: Set by libavcodec, user can override.
+ *
+ * @deprecated use get_buffer2()
*/
+ attribute_deprecated
int (*get_buffer)(struct AVCodecContext *c, AVFrame *pic);
/**
* but not by more than one thread at once, so does not need to be reentrant.
* - encoding: unused
* - decoding: Set by libavcodec, user can override.
+ *
+ * @deprecated custom freeing callbacks should be set from get_buffer2()
*/
+ attribute_deprecated
void (*release_buffer)(struct AVCodecContext *c, AVFrame *pic);
/**
* - encoding: unused
* - decoding: Set by libavcodec, user can override.
*/
+ attribute_deprecated
int (*reget_buffer)(struct AVCodecContext *c, AVFrame *pic);
+#endif
+
+ /**
+ * This callback is called at the beginning of each frame to get data
+ * buffer(s) for it. There may be one contiguous buffer for all the data or
+ * there may be a buffer per each data plane or anything in between. What
+ * this means is, you may set however many entries in buf[] you feel necessary.
+ * Each buffer must be reference-counted using the AVBuffer API (see description
+ * of buf[] below).
+ *
+ * The following fields will be set in the frame before this callback is
+ * called:
+ * - format
+ * - width, height (video only)
+ * - sample_rate, channel_layout, nb_samples (audio only)
+ * Their values may differ from the corresponding values in
+ * AVCodecContext. This callback must use the frame values, not the codec
+ * context values, to calculate the required buffer size.
+ *
+ * This callback must fill the following fields in the frame:
+ * - data[]
+ * - linesize[]
+ * - extended_data:
+ * * if the data is planar audio with more than 8 channels, then this
+ * callback must allocate and fill extended_data to contain all pointers
+ * to all data planes. data[] must hold as many pointers as it can.
+ * extended_data must be allocated with av_malloc() and will be freed in
+ * av_frame_unref().
+ * * otherwise exended_data must point to data
+ * - buf[] must contain one or more pointers to AVBufferRef structures. Each of
+ * the frame's data and extended_data pointers must be contained in these. That
+ * is, one AVBufferRef for each allocated chunk of memory, not necessarily one
+ * AVBufferRef per data[] entry. See: av_buffer_create(), av_buffer_alloc(),
+ * and av_buffer_ref().
+ * - extended_buf and nb_extended_buf must be allocated with av_malloc() by
+ * this callback and filled with the extra buffers if there are more
+ * buffers than buf[] can hold. extended_buf will be freed in
+ * av_frame_unref().
+ *
+ * If CODEC_CAP_DR1 is not set then get_buffer2() must call
+ * avcodec_default_get_buffer2() instead of providing buffers allocated by
+ * some other means.
+ *
+ * Each data plane must be aligned to the maximum required by the target
+ * CPU.
+ *
+ * @see avcodec_default_get_buffer2()
+ *
+ * Video:
+ *
+ * If AV_GET_BUFFER_FLAG_REF is set in flags then the frame may be reused
+ * (read and/or written to if it is writable) later by libavcodec.
+ *
+ * If CODEC_FLAG_EMU_EDGE is not set in s->flags, the buffer must contain an
+ * edge of the size returned by avcodec_get_edge_width() on all sides.
+ *
+ * avcodec_align_dimensions2() should be used to find the required width and
+ * height, as they normally need to be rounded up to the next multiple of 16.
+ *
+ * If frame multithreading is used and thread_safe_callbacks is set,
+ * this callback may be called from a different thread, but not from more
+ * than one at once. Does not need to be reentrant.
+ *
+ * @see avcodec_align_dimensions2()
+ *
+ * Audio:
+ *
+ * Decoders request a buffer of a particular size by setting
+ * AVFrame.nb_samples prior to calling get_buffer2(). The decoder may,
+ * however, utilize only part of the buffer by setting AVFrame.nb_samples
+ * to a smaller value in the output frame.
+ *
+ * As a convenience, av_samples_get_buffer_size() and
+ * av_samples_fill_arrays() in libavutil may be used by custom get_buffer2()
+ * functions to find the required data size and to fill data pointers and
+ * linesize. In AVFrame.linesize, only linesize[0] may be set for audio
+ * since all planes must be the same size.
+ *
+ * @see av_samples_get_buffer_size(), av_samples_fill_arrays()
+ *
+ * - encoding: unused
+ * - decoding: Set by libavcodec, user can override.
+ */
+ int (*get_buffer2)(struct AVCodecContext *s, AVFrame *frame, int flags);
+ /**
+ * If non-zero, the decoded audio and video frames returned from
+ * avcodec_decode_video2() and avcodec_decode_audio4() are reference-counted
+ * and are valid indefinitely. The caller must free them with
+ * av_frame_unref() when they are not needed anymore.
+ * Otherwise, the decoded frames must not be freed by the caller and are
+ * only valid until the next decode call.
+ *
+ * - encoding: unused
+ * - decoding: set by the caller before avcodec_open2().
+ */
+ int refcounted_frames;
/* - encoding parameters */
float qcompress; ///< amount of qscale change between easy & hard scenes (0.0-1.0)
/**
* ratecontrol qmin qmax limiting method
- * 0-> clipping, 1-> use a nice continous function to limit qscale wthin qmin/qmax.
+ * 0-> clipping, 1-> use a nice continuous function to limit qscale wthin qmin/qmax.
* - encoding: Set by user.
* - decoding: unused
*/
#define FF_IDCT_INT 1
#define FF_IDCT_SIMPLE 2
#define FF_IDCT_SIMPLEMMX 3
-#define FF_IDCT_LIBMPEG2MMX 4
-#define FF_IDCT_MMI 5
#define FF_IDCT_ARM 7
#define FF_IDCT_ALTIVEC 8
#define FF_IDCT_SH4 9
#define FF_IDCT_SIMPLEARM 10
-#define FF_IDCT_H264 11
-#define FF_IDCT_VP3 12
#define FF_IDCT_IPP 13
#define FF_IDCT_XVIDMMX 14
-#define FF_IDCT_CAVS 15
#define FF_IDCT_SIMPLEARMV5TE 16
#define FF_IDCT_SIMPLEARMV6 17
#define FF_IDCT_SIMPLEVIS 18
-#define FF_IDCT_WMV2 19
#define FF_IDCT_FAAN 20
-#define FF_IDCT_EA 21
#define FF_IDCT_SIMPLENEON 22
#define FF_IDCT_SIMPLEALPHA 23
-#define FF_IDCT_BINK 24
-
-#if FF_API_DSP_MASK
- /**
- * Unused.
- * @deprecated use av_set_cpu_flags_mask() instead.
- */
- attribute_deprecated unsigned dsp_mask;
-#endif
/**
* bits per sample/pixel from the demuxer (needed for huffyuv).
*/
int bits_per_raw_sample;
+#if FF_API_LOWRES
/**
* low resolution decoding, 1-> 1/2 size, 2->1/4 size
* - encoding: unused
* - decoding: Set by user.
+ *
+ * @deprecated use decoder private options instead
*/
attribute_deprecated int lowres;
+#endif
/**
* the picture in the bitstream
#define FF_PROFILE_MPEG4_SIMPLE_STUDIO 14
#define FF_PROFILE_MPEG4_ADVANCED_SIMPLE 15
+#define FF_PROFILE_JPEG2000_CSTREAM_RESTRICTION_0 0
+#define FF_PROFILE_JPEG2000_CSTREAM_RESTRICTION_1 1
+#define FF_PROFILE_JPEG2000_CSTREAM_NO_RESTRICTION 2
+#define FF_PROFILE_JPEG2000_DCINEMA_2K 3
+#define FF_PROFILE_JPEG2000_DCINEMA_4K 4
+
/**
* level
* - encoding: Set by user.
typedef struct AVCodecDefault AVCodecDefault;
+struct AVSubtitle;
+
/**
* AVCodec.
*/
*/
int capabilities;
const AVRational *supported_framerates; ///< array of supported framerates, or NULL if any, array is terminated by {0,0}
- const enum PixelFormat *pix_fmts; ///< array of supported pixel formats, or NULL if unknown, array is terminated by -1
+ const enum AVPixelFormat *pix_fmts; ///< array of supported pixel formats, or NULL if unknown, array is terminated by -1
const int *supported_samplerates; ///< array of supported audio samplerates, or NULL if unknown, array is terminated by 0
const enum AVSampleFormat *sample_fmts; ///< array of supported sample formats, or NULL if unknown, array is terminated by -1
const uint64_t *channel_layouts; ///< array of support channel layouts, or NULL if unknown. array is terminated by 0
void (*init_static_data)(struct AVCodec *codec);
int (*init)(AVCodecContext *);
- int (*encode)(AVCodecContext *, uint8_t *buf, int buf_size, void *data);
+ int (*encode_sub)(AVCodecContext *, uint8_t *buf, int buf_size,
+ const struct AVSubtitle *sub);
/**
* Encode data to an AVPacket.
*
*
* Only hardware accelerated formats are supported here.
*/
- enum PixelFormat pix_fmt;
+ enum AVPixelFormat pix_fmt;
/**
* Hardware accelerated codec capabilities.
SUBTITLE_ASS,
};
+#define AV_SUBTITLE_FLAG_FORCED 0x00000001
+
typedef struct AVSubtitleRect {
int x; ///< top left corner of pict, undefined when pict is not set
int y; ///< top left corner of pict, undefined when pict is not set
* struct.
*/
char *ass;
+ int flags;
} AVSubtitleRect;
typedef struct AVSubtitle {
* if c is non-NULL, returns the next registered codec after c,
* or NULL if c is the last one.
*/
-AVCodec *av_codec_next(AVCodec *c);
+AVCodec *av_codec_next(const AVCodec *c);
/**
* Return the LIBAVCODEC_VERSION_INT constant.
* @return An AVCodecContext filled with default values or NULL on failure.
* @see avcodec_get_context_defaults
*/
-AVCodecContext *avcodec_alloc_context3(AVCodec *codec);
+AVCodecContext *avcodec_alloc_context3(const AVCodec *codec);
/**
* Set the fields of the given AVCodecContext to default values corresponding
* If codec is non-NULL, it is illegal to call avcodec_open2() with a
* different codec on this AVCodecContext.
*/
-int avcodec_get_context_defaults3(AVCodecContext *s, AVCodec *codec);
+int avcodec_get_context_defaults3(AVCodecContext *s, const AVCodec *codec);
/**
* Get the AVClass for AVCodecContext. It can be used in combination with
/**
* Allocate an AVFrame and set its fields to default values. The resulting
- * struct can be deallocated by simply calling av_free().
+ * struct must be freed using avcodec_free_frame().
*
* @return An AVFrame filled with default values or NULL on failure.
* @see avcodec_get_frame_defaults
/**
* Set the fields of the given AVFrame to default values.
*
- * @param pic The AVFrame of which the fields should be set to default values.
+ * @param frame The AVFrame of which the fields should be set to default values.
+ */
+void avcodec_get_frame_defaults(AVFrame *frame);
+
+/**
+ * Free the frame and any dynamically allocated objects in it,
+ * e.g. extended_data.
+ *
+ * @param frame frame to be freed. The pointer will be set to NULL.
+ *
+ * @warning this function does NOT free the data buffers themselves
+ * (it does not know how, since they might have been allocated with
+ * a custom get_buffer()).
*/
-void avcodec_get_frame_defaults(AVFrame *pic);
+void avcodec_free_frame(AVFrame **frame);
/**
* Initialize the AVCodecContext to use the given AVCodec. Prior to using this
* @see avcodec_alloc_context3(), avcodec_find_decoder(), avcodec_find_encoder(),
* av_dict_set(), av_opt_find().
*/
-int avcodec_open2(AVCodecContext *avctx, AVCodec *codec, AVDictionary **options);
+int avcodec_open2(AVCodecContext *avctx, const AVCodec *codec, AVDictionary **options);
/**
* Close a given AVCodecContext and free all the data associated with it
* @{
*/
-/**
- * @deprecated use NULL instead
- */
-attribute_deprecated void av_destruct_packet_nofree(AVPacket *pkt);
-
+#if FF_API_DESTRUCT_PACKET
/**
* Default packet destructor.
+ * @deprecated use the AVBuffer API instead
*/
+attribute_deprecated
void av_destruct_packet(AVPacket *pkt);
+#endif
/**
* Initialize optional fields of a packet with default values.
*/
int av_grow_packet(AVPacket *pkt, int grow_by);
+/**
+ * Initialize a reference-counted packet from av_malloc()ed data.
+ *
+ * @param pkt packet to be initialized. This function will set the data, size,
+ * buf and destruct fields, all others are left untouched.
+ * @param data Data allocated by av_malloc() to be used as packet data. If this
+ * function returns successfully, the data is owned by the underlying AVBuffer.
+ * The caller may not access the data through other means.
+ * @param size size of data in bytes, without the padding. I.e. the full buffer
+ * size is assumed to be size + FF_INPUT_BUFFER_PADDING_SIZE.
+ *
+ * @return 0 on success, a negative AVERROR on error
+ */
+int av_packet_from_data(AVPacket *pkt, uint8_t *data, int size);
+
/**
* @warning This is a hack - the packet memory allocation stuff is broken. The
* packet is allocated if it was not really allocated.
*/
AVCodec *avcodec_find_decoder_by_name(const char *name);
-int avcodec_default_get_buffer(AVCodecContext *s, AVFrame *pic);
-void avcodec_default_release_buffer(AVCodecContext *s, AVFrame *pic);
-int avcodec_default_reget_buffer(AVCodecContext *s, AVFrame *pic);
+#if FF_API_GET_BUFFER
+attribute_deprecated int avcodec_default_get_buffer(AVCodecContext *s, AVFrame *pic);
+attribute_deprecated void avcodec_default_release_buffer(AVCodecContext *s, AVFrame *pic);
+attribute_deprecated int avcodec_default_reget_buffer(AVCodecContext *s, AVFrame *pic);
+#endif
+
+/**
+ * The default callback for AVCodecContext.get_buffer2(). It is made public so
+ * it can be called by custom get_buffer2() implementations for decoders without
+ * CODEC_CAP_DR1 set.
+ */
+int avcodec_default_get_buffer2(AVCodecContext *s, AVFrame *frame, int flags);
/**
* Return the amount of padding in pixels which the get_buffer callback must
void avcodec_align_dimensions2(AVCodecContext *s, int *width, int *height,
int linesize_align[AV_NUM_DATA_POINTERS]);
-#if FF_API_OLD_DECODE_AUDIO
-/**
- * Wrapper function which calls avcodec_decode_audio4.
- *
- * @deprecated Use avcodec_decode_audio4 instead.
- *
- * Decode the audio frame of size avpkt->size from avpkt->data into samples.
- * Some decoders may support multiple frames in a single AVPacket, such
- * decoders would then just decode the first frame. In this case,
- * avcodec_decode_audio3 has to be called again with an AVPacket that contains
- * the remaining data in order to decode the second frame etc.
- * If no frame
- * could be outputted, frame_size_ptr is zero. Otherwise, it is the
- * decompressed frame size in bytes.
- *
- * @warning You must set frame_size_ptr to the allocated size of the
- * output buffer before calling avcodec_decode_audio3().
- *
- * @warning The input buffer must be FF_INPUT_BUFFER_PADDING_SIZE larger than
- * the actual read bytes because some optimized bitstream readers read 32 or 64
- * bits at once and could read over the end.
- *
- * @warning The end of the input buffer avpkt->data should be set to 0 to ensure that
- * no overreading happens for damaged MPEG streams.
- *
- * @warning You must not provide a custom get_buffer() when using
- * avcodec_decode_audio3(). Doing so will override it with
- * avcodec_default_get_buffer. Use avcodec_decode_audio4() instead,
- * which does allow the application to provide a custom get_buffer().
- *
- * @note You might have to align the input buffer avpkt->data and output buffer
- * samples. The alignment requirements depend on the CPU: On some CPUs it isn't
- * necessary at all, on others it won't work at all if not aligned and on others
- * it will work but it will have an impact on performance.
- *
- * In practice, avpkt->data should have 4 byte alignment at minimum and
- * samples should be 16 byte aligned unless the CPU doesn't need it
- * (AltiVec and SSE do).
- *
- * @note Codecs which have the CODEC_CAP_DELAY capability set have a delay
- * between input and output, these need to be fed with avpkt->data=NULL,
- * avpkt->size=0 at the end to return the remaining frames.
- *
- * @param avctx the codec context
- * @param[out] samples the output buffer, sample type in avctx->sample_fmt
- * If the sample format is planar, each channel plane will
- * be the same size, with no padding between channels.
- * @param[in,out] frame_size_ptr the output buffer size in bytes
- * @param[in] avpkt The input AVPacket containing the input buffer.
- * You can create such packet with av_init_packet() and by then setting
- * data and size, some decoders might in addition need other fields.
- * All decoders are designed to use the least fields possible though.
- * @return On error a negative value is returned, otherwise the number of bytes
- * used or zero if no frame data was decompressed (used) from the input AVPacket.
- */
-attribute_deprecated int avcodec_decode_audio3(AVCodecContext *avctx, int16_t *samples,
- int *frame_size_ptr,
- AVPacket *avpkt);
-#endif
-
/**
* Decode the audio frame of size avpkt->size from avpkt->data into frame.
*
*
* @param avctx the codec context
* @param[out] frame The AVFrame in which to store decoded audio samples.
- * Decoders request a buffer of a particular size by setting
- * AVFrame.nb_samples prior to calling get_buffer(). The
- * decoder may, however, only utilize part of the buffer by
- * setting AVFrame.nb_samples to a smaller value in the
- * output frame.
+ * The decoder will allocate a buffer for the decoded frame by
+ * calling the AVCodecContext.get_buffer2() callback.
+ * When AVCodecContext.refcounted_frames is set to 1, the frame is
+ * reference counted and the returned reference belongs to the
+ * caller. The caller must release the frame using av_frame_unref()
+ * when the frame is no longer needed. The caller may safely write
+ * to the frame if av_frame_is_writable() returns 1.
+ * When AVCodecContext.refcounted_frames is set to 0, the returned
+ * reference belongs to the decoder and is valid only until the
+ * next call to this function or until closing the decoder.
+ * The caller may not write to it.
* @param[out] got_frame_ptr Zero if no frame could be decoded, otherwise it is
* non-zero.
* @param[in] avpkt The input AVPacket containing the input buffer.
*
* @param avctx the codec context
* @param[out] picture The AVFrame in which the decoded video frame will be stored.
- * Use avcodec_alloc_frame to get an AVFrame, the codec will
- * allocate memory for the actual bitmap.
- * with default get/release_buffer(), the decoder frees/reuses the bitmap as it sees fit.
- * with overridden get/release_buffer() (needs CODEC_CAP_DR1) the user decides into what buffer the decoder
- * decodes and the decoder tells the user once it does not need the data anymore,
- * the user app can at this point free/reuse/keep the memory as it sees fit.
+ * Use av_frame_alloc() to get an AVFrame. The codec will
+ * allocate memory for the actual bitmap by calling the
+ * AVCodecContext.get_buffer2() callback.
+ * When AVCodecContext.refcounted_frames is set to 1, the frame is
+ * reference counted and the returned reference belongs to the
+ * caller. The caller must release the frame using av_frame_unref()
+ * when the frame is no longer needed. The caller may safely write
+ * to the frame if av_frame_is_writable() returns 1.
+ * When AVCodecContext.refcounted_frames is set to 0, the returned
+ * reference belongs to the decoder and is valid only until the
+ * next call to this function or until closing the decoder. The
+ * caller may not write to it.
*
* @param[in] avpkt The input AVpacket containing the input buffer.
* You can create such packet with av_init_packet() and by then setting
* For all other types, this is in units of AVCodecContext.time_base.
*/
int duration;
+
+ enum AVFieldOrder field_order;
} AVCodecParserContext;
typedef struct AVCodecParser {
int64_t pts, int64_t dts,
int64_t pos);
+/**
+ * @return 0 if the output buffer is a subset of the input, 1 if it is allocated and must be freed
+ * @deprecated use AVBitstreamFilter
+ */
int av_parser_change(AVCodecParserContext *s,
AVCodecContext *avctx,
uint8_t **poutbuf, int *poutbuf_size,
*/
AVCodec *avcodec_find_encoder_by_name(const char *name);
-#if FF_API_OLD_ENCODE_AUDIO
-/**
- * Encode an audio frame from samples into buf.
- *
- * @deprecated Use avcodec_encode_audio2 instead.
- *
- * @note The output buffer should be at least FF_MIN_BUFFER_SIZE bytes large.
- * However, for codecs with avctx->frame_size equal to 0 (e.g. PCM) the user
- * will know how much space is needed because it depends on the value passed
- * in buf_size as described below. In that case a lower value can be used.
- *
- * @param avctx the codec context
- * @param[out] buf the output buffer
- * @param[in] buf_size the output buffer size
- * @param[in] samples the input buffer containing the samples
- * The number of samples read from this buffer is frame_size*channels,
- * both of which are defined in avctx.
- * For codecs which have avctx->frame_size equal to 0 (e.g. PCM) the number of
- * samples read from samples is equal to:
- * buf_size * 8 / (avctx->channels * av_get_bits_per_sample(avctx->codec_id))
- * This also implies that av_get_bits_per_sample() must not return 0 for these
- * codecs.
- * @return On error a negative value is returned, on success zero or the number
- * of bytes used to encode the data read from the input buffer.
- */
-int attribute_deprecated avcodec_encode_audio(AVCodecContext *avctx,
- uint8_t *buf, int buf_size,
- const short *samples);
-#endif
-
/**
* Encode a frame of audio.
*
int avcodec_encode_audio2(AVCodecContext *avctx, AVPacket *avpkt,
const AVFrame *frame, int *got_packet_ptr);
-#if FF_API_OLD_ENCODE_VIDEO
-/**
- * @deprecated use avcodec_encode_video2() instead.
- *
- * Encode a video frame from pict into buf.
- * The input picture should be
- * stored using a specific format, namely avctx.pix_fmt.
- *
- * @param avctx the codec context
- * @param[out] buf the output buffer for the bitstream of encoded frame
- * @param[in] buf_size the size of the output buffer in bytes
- * @param[in] pict the input picture to encode
- * @return On error a negative value is returned, on success zero or the number
- * of bytes used from the output buffer.
- */
-attribute_deprecated
-int avcodec_encode_video(AVCodecContext *avctx, uint8_t *buf, int buf_size,
- const AVFrame *pict);
-#endif
-
/**
* Encode a frame of video.
*
const AVSubtitle *sub);
-/**
- * @}
- */
-
-/**
- * @defgroup lavc_resample Audio resampling
- * @ingroup libavc
- *
- * @{
- */
-struct ReSampleContext;
-struct AVResampleContext;
-
-typedef struct ReSampleContext ReSampleContext;
-
-/**
- * Initialize audio resampling context.
- *
- * @param output_channels number of output channels
- * @param input_channels number of input channels
- * @param output_rate output sample rate
- * @param input_rate input sample rate
- * @param sample_fmt_out requested output sample format
- * @param sample_fmt_in input sample format
- * @param filter_length length of each FIR filter in the filterbank relative to the cutoff frequency
- * @param log2_phase_count log2 of the number of entries in the polyphase filterbank
- * @param linear if 1 then the used FIR filter will be linearly interpolated
- between the 2 closest, if 0 the closest will be used
- * @param cutoff cutoff frequency, 1.0 corresponds to half the output sampling rate
- * @return allocated ReSampleContext, NULL if error occurred
- */
-ReSampleContext *av_audio_resample_init(int output_channels, int input_channels,
- int output_rate, int input_rate,
- enum AVSampleFormat sample_fmt_out,
- enum AVSampleFormat sample_fmt_in,
- int filter_length, int log2_phase_count,
- int linear, double cutoff);
-
-int audio_resample(ReSampleContext *s, short *output, short *input, int nb_samples);
-
-/**
- * Free resample context.
- *
- * @param s a non-NULL pointer to a resample context previously
- * created with av_audio_resample_init()
- */
-void audio_resample_close(ReSampleContext *s);
-
-
-/**
- * Initialize an audio resampler.
- * Note, if either rate is not an integer then simply scale both rates up so they are.
- * @param filter_length length of each FIR filter in the filterbank relative to the cutoff freq
- * @param log2_phase_count log2 of the number of entries in the polyphase filterbank
- * @param linear If 1 then the used FIR filter will be linearly interpolated
- between the 2 closest, if 0 the closest will be used
- * @param cutoff cutoff frequency, 1.0 corresponds to half the output sampling rate
- */
-struct AVResampleContext *av_resample_init(int out_rate, int in_rate, int filter_length, int log2_phase_count, int linear, double cutoff);
-
-/**
- * Resample an array of samples using a previously configured context.
- * @param src an array of unconsumed samples
- * @param consumed the number of samples of src which have been consumed are returned here
- * @param src_size the number of unconsumed samples available
- * @param dst_size the amount of space in samples available in dst
- * @param update_ctx If this is 0 then the context will not be modified, that way several channels can be resampled with the same context.
- * @return the number of samples written in dst or -1 if an error occurred
- */
-int av_resample(struct AVResampleContext *c, short *dst, short *src, int *consumed, int src_size, int dst_size, int update_ctx);
-
-
-/**
- * Compensate samplerate/timestamp drift. The compensation is done by changing
- * the resampler parameters, so no audible clicks or similar distortions occur
- * @param compensation_distance distance in output samples over which the compensation should be performed
- * @param sample_delta number of output samples which should be output less
- *
- * example: av_resample_compensate(c, 10, 500)
- * here instead of 510 samples only 500 samples would be output
- *
- * note, due to rounding the actual compensation might be slightly different,
- * especially if the compensation_distance is large and the in_rate used during init is small
- */
-void av_resample_compensate(struct AVResampleContext *c, int sample_delta, int compensation_distance);
-void av_resample_close(struct AVResampleContext *c);
-
/**
* @}
*/
* @param height the height of the picture
* @return zero if successful, a negative value if not
*/
-int avpicture_alloc(AVPicture *picture, enum PixelFormat pix_fmt, int width, int height);
+int avpicture_alloc(AVPicture *picture, enum AVPixelFormat pix_fmt, int width, int height);
/**
* Free a picture previously allocated by avpicture_alloc().
* @return size of the image data in bytes
*/
int avpicture_fill(AVPicture *picture, uint8_t *ptr,
- enum PixelFormat pix_fmt, int width, int height);
+ enum AVPixelFormat pix_fmt, int width, int height);
/**
* Copy pixel data from an AVPicture into a buffer.
* @param[in] dest_size The size of 'dest'.
* @return The number of bytes written to dest, or a negative value (error code) on error.
*/
-int avpicture_layout(const AVPicture* src, enum PixelFormat pix_fmt, int width, int height,
+int avpicture_layout(const AVPicture* src, enum AVPixelFormat pix_fmt,
+ int width, int height,
unsigned char *dest, int dest_size);
/**
* @param height the height of the image
* @return Image data size in bytes or -1 on error (e.g. too large dimensions).
*/
-int avpicture_get_size(enum PixelFormat pix_fmt, int width, int height);
+int avpicture_get_size(enum AVPixelFormat pix_fmt, int width, int height);
+#if FF_API_DEINTERLACE
/**
* deinterlace - if not supported return -1
+ *
+ * @deprecated - use yadif (in libavfilter) instead
*/
+attribute_deprecated
int avpicture_deinterlace(AVPicture *dst, const AVPicture *src,
- enum PixelFormat pix_fmt, int width, int height);
+ enum AVPixelFormat pix_fmt, int width, int height);
+#endif
/**
* Copy image src to dst. Wraps av_picture_data_copy() above.
*/
void av_picture_copy(AVPicture *dst, const AVPicture *src,
- enum PixelFormat pix_fmt, int width, int height);
+ enum AVPixelFormat pix_fmt, int width, int height);
/**
* Crop image top and left side.
*/
int av_picture_crop(AVPicture *dst, const AVPicture *src,
- enum PixelFormat pix_fmt, int top_band, int left_band);
+ enum AVPixelFormat pix_fmt, int top_band, int left_band);
/**
* Pad image.
*/
-int av_picture_pad(AVPicture *dst, const AVPicture *src, int height, int width, enum PixelFormat pix_fmt,
+int av_picture_pad(AVPicture *dst, const AVPicture *src, int height, int width, enum AVPixelFormat pix_fmt,
int padtop, int padbottom, int padleft, int padright, int *color);
/**
* @{
*/
-void avcodec_get_chroma_sub_sample(enum PixelFormat pix_fmt, int *h_shift, int *v_shift);
+/**
+ * @deprecated Use av_pix_fmt_get_chroma_sub_sample
+ */
+
+void attribute_deprecated avcodec_get_chroma_sub_sample(enum AVPixelFormat pix_fmt, int *h_shift, int *v_shift);
/**
* Return a value representing the fourCC code associated to the
* pixel format pix_fmt, or 0 if no associated fourCC code can be
* found.
*/
-unsigned int avcodec_pix_fmt_to_codec_tag(enum PixelFormat pix_fmt);
+unsigned int avcodec_pix_fmt_to_codec_tag(enum AVPixelFormat pix_fmt);
#define FF_LOSS_RESOLUTION 0x0001 /**< loss due to resolution change */
#define FF_LOSS_DEPTH 0x0002 /**< loss due to color depth change */
* @param[in] has_alpha Whether the source pixel format alpha channel is used.
* @return Combination of flags informing you what kind of losses will occur.
*/
-int avcodec_get_pix_fmt_loss(enum PixelFormat dst_pix_fmt, enum PixelFormat src_pix_fmt,
+int avcodec_get_pix_fmt_loss(enum AVPixelFormat dst_pix_fmt, enum AVPixelFormat src_pix_fmt,
int has_alpha);
-#if FF_API_FIND_BEST_PIX_FMT
-/**
- * @deprecated use avcodec_find_best_pix_fmt2() instead.
- *
- * Find the best pixel format to convert to given a certain source pixel
- * format. When converting from one pixel format to another, information loss
- * may occur. For example, when converting from RGB24 to GRAY, the color
- * information will be lost. Similarly, other losses occur when converting from
- * some formats to other formats. avcodec_find_best_pix_fmt() searches which of
- * the given pixel formats should be used to suffer the least amount of loss.
- * The pixel formats from which it chooses one, are determined by the
- * pix_fmt_mask parameter.
- *
- * @code
- * src_pix_fmt = PIX_FMT_YUV420P;
- * pix_fmt_mask = (1 << PIX_FMT_YUV422P) || (1 << PIX_FMT_RGB24);
- * dst_pix_fmt = avcodec_find_best_pix_fmt(pix_fmt_mask, src_pix_fmt, alpha, &loss);
- * @endcode
- *
- * @param[in] pix_fmt_mask bitmask determining which pixel format to choose from
- * @param[in] src_pix_fmt source pixel format
- * @param[in] has_alpha Whether the source pixel format alpha channel is used.
- * @param[out] loss_ptr Combination of flags informing you what kind of losses will occur.
- * @return The best pixel format to convert to or -1 if none was found.
- */
-attribute_deprecated
-enum PixelFormat avcodec_find_best_pix_fmt(int64_t pix_fmt_mask, enum PixelFormat src_pix_fmt,
- int has_alpha, int *loss_ptr);
-#endif /* FF_API_FIND_BEST_PIX_FMT */
-
/**
* Find the best pixel format to convert to given a certain source pixel
* format. When converting from one pixel format to another, information loss
* pix_fmt_list parameter.
*
*
- * @param[in] pix_fmt_list PIX_FMT_NONE terminated array of pixel formats to choose from
+ * @param[in] pix_fmt_list AV_PIX_FMT_NONE terminated array of pixel formats to choose from
* @param[in] src_pix_fmt source pixel format
* @param[in] has_alpha Whether the source pixel format alpha channel is used.
* @param[out] loss_ptr Combination of flags informing you what kind of losses will occur.
* @return The best pixel format to convert to or -1 if none was found.
*/
-enum PixelFormat avcodec_find_best_pix_fmt2(enum PixelFormat *pix_fmt_list,
- enum PixelFormat src_pix_fmt,
- int has_alpha, int *loss_ptr);
+enum AVPixelFormat avcodec_find_best_pix_fmt2(enum AVPixelFormat *pix_fmt_list,
+ enum AVPixelFormat src_pix_fmt,
+ int has_alpha, int *loss_ptr);
-enum PixelFormat avcodec_default_get_format(struct AVCodecContext *s, const enum PixelFormat * fmt);
+enum AVPixelFormat avcodec_default_get_format(struct AVCodecContext *s, const enum AVPixelFormat * fmt);
/**
* @}
*/
void avcodec_flush_buffers(AVCodecContext *avctx);
-void avcodec_default_free_buffers(AVCodecContext *s);
-
/**
* Return codec bits per sample.
*
*/
unsigned int av_xiphlacing(unsigned char *s, unsigned int v);
+#if FF_API_MISSING_SAMPLE
/**
* Log a generic warning message about a missing feature. This function is
* intended to be used internally by Libav (libavcodec, libavformat, etc.)
* If want_sample is non-zero, additional verbage will be added to the log
* message which tells the user how to report samples to the development
* mailing list.
+ * @deprecated Use avpriv_report_missing_feature() instead.
*/
+attribute_deprecated
void av_log_missing_feature(void *avc, const char *feature, int want_sample);
/**
* @param[in] avc a pointer to an arbitrary struct of which the first field is
* a pointer to an AVClass struct
* @param[in] msg string containing an optional message, or NULL if no message
+ * @deprecated Use avpriv_request_sample() instead.
*/
+attribute_deprecated
void av_log_ask_for_sample(void *avc, const char *msg, ...) av_printf_format(2, 3);
+#endif /* FF_API_MISSING_SAMPLE */
/**
* Register the hardware accelerator hwaccel.
/**
* @return a non-zero number if codec is an encoder, zero otherwise
*/
-int av_codec_is_encoder(AVCodec *codec);
+int av_codec_is_encoder(const AVCodec *codec);
/**
* @return a non-zero number if codec is a decoder, zero otherwise
*/
-int av_codec_is_decoder(AVCodec *codec);
+int av_codec_is_decoder(const AVCodec *codec);
/**
* @return descriptor for given codec ID or NULL if no descriptor exists.
*/
const AVCodecDescriptor *avcodec_descriptor_next(const AVCodecDescriptor *prev);
+/**
+ * @return codec descriptor with the given name or NULL if no such descriptor
+ * exists.
+ */
+const AVCodecDescriptor *avcodec_descriptor_get_by_name(const char *name);
+
/**
* @}
*/