AV_CODEC_ID_SGIRLE,
AV_CODEC_ID_MVC1,
AV_CODEC_ID_MVC2,
+ AV_CODEC_ID_HQX,
+ AV_CODEC_ID_TDSC,
+ AV_CODEC_ID_HQ_HQA,
+ AV_CODEC_ID_HAP,
+ AV_CODEC_ID_DDS,
+ AV_CODEC_ID_DXV,
/* various PCM "codecs" */
AV_CODEC_ID_FIRST_AUDIO = 0x10000, ///< A dummy id pointing at the start of audio codecs
AV_CODEC_ID_PCM_S8_PLANAR,
AV_CODEC_ID_PCM_S24LE_PLANAR,
AV_CODEC_ID_PCM_S32LE_PLANAR,
+ AV_CODEC_ID_PCM_S16BE_PLANAR,
/* various ADPCM codecs */
AV_CODEC_ID_ADPCM_IMA_QT = 0x11000,
AV_CODEC_ID_METASOUND,
AV_CODEC_ID_PAF_AUDIO,
AV_CODEC_ID_ON2AVC,
+ AV_CODEC_ID_DSS_SP,
/* subtitle codecs */
AV_CODEC_ID_FIRST_SUBTITLE = 0x17000, ///< A dummy ID pointing at the start of subtitle codecs.
/**
* This struct describes the properties of a single codec described by an
* AVCodecID.
- * @see avcodec_get_descriptor()
+ * @see avcodec_descriptor_get()
*/
typedef struct AVCodecDescriptor {
enum AVCodecID id;
* Codec supports lossless compression. Audio and video codecs only.
*/
#define AV_CODEC_PROP_LOSSLESS (1 << 2)
+/**
+ * Codec supports frame reordering. That is, the coded order (the order in which
+ * the encoded packets are output by the encoders / stored / input to the
+ * decoders) may be different from the presentation order of the corresponding
+ * frames.
+ *
+ * For codecs that do not have this property set, PTS and DTS should always be
+ * equal.
+ */
+#define AV_CODEC_PROP_REORDER (1 << 3)
/**
* @ingroup lavc_decoding
* Note: If the first 23 bits of the additional bytes are not 0, then damaged
* MPEG bitstreams could cause overread and segfault.
*/
-#define FF_INPUT_BUFFER_PADDING_SIZE 8
+#define AV_INPUT_BUFFER_PADDING_SIZE 8
/**
* @ingroup lavc_encoding
* minimum encoding buffer size
* Used to avoid some checks during header writing.
*/
-#define FF_MIN_BUFFER_SIZE 16384
+#define AV_INPUT_BUFFER_MIN_SIZE 16384
+#if FF_API_WITHOUT_PREFIX
+/**
+ * @deprecated use AV_INPUT_BUFFER_PADDING_SIZE instead
+ */
+#define FF_INPUT_BUFFER_PADDING_SIZE 8
+
+/**
+ * @deprecated use AV_INPUT_BUFFER_MIN_SIZE instead
+ */
+#define FF_MIN_BUFFER_SIZE 16384
+#endif /* FF_API_WITHOUT_PREFIX */
/**
* @ingroup lavc_encoding
* motion estimation type.
+ * @deprecated use codec private option instead
*/
+#if FF_API_MOTION_EST
enum Motion_Est_ID {
ME_ZERO = 1, ///< no search, that is use 0,0 vector whenever one is needed
ME_FULL,
ME_UMH, ///< uneven multi-hexagon search
ME_TESA, ///< transformed exhaustive search algorithm
};
+#endif
/**
* @ingroup lavc_decoding
AVDISCARD_ALL = 48, ///< discard all
};
-enum AVColorPrimaries{
- AVCOL_PRI_BT709 = 1, ///< also ITU-R BT1361 / IEC 61966-2-4 / SMPTE RP177 Annex B
- AVCOL_PRI_UNSPECIFIED = 2,
- AVCOL_PRI_BT470M = 4,
- AVCOL_PRI_BT470BG = 5, ///< also ITU-R BT601-6 625 / ITU-R BT1358 625 / ITU-R BT1700 625 PAL & SECAM
- AVCOL_PRI_SMPTE170M = 6, ///< also ITU-R BT601-6 525 / ITU-R BT1358 525 / ITU-R BT1700 NTSC
- AVCOL_PRI_SMPTE240M = 7, ///< functionally identical to above
- AVCOL_PRI_FILM = 8,
- AVCOL_PRI_BT2020 = 9, ///< ITU-R BT2020
- AVCOL_PRI_NB , ///< Not part of ABI
-};
-
-enum AVColorTransferCharacteristic{
- AVCOL_TRC_BT709 = 1, ///< also ITU-R BT1361
- AVCOL_TRC_UNSPECIFIED = 2,
- AVCOL_TRC_GAMMA22 = 4, ///< also ITU-R BT470M / ITU-R BT1700 625 PAL & SECAM
- AVCOL_TRC_GAMMA28 = 5, ///< also ITU-R BT470BG
- AVCOL_TRC_SMPTE170M = 6, ///< also ITU-R BT601-6 525 or 625 / ITU-R BT1358 525 or 625 / ITU-R BT1700 NTSC
- AVCOL_TRC_SMPTE240M = 7,
- AVCOL_TRC_LINEAR = 8, ///< "Linear transfer characteristics"
- AVCOL_TRC_LOG = 9, ///< "Logarithmic transfer characteristic (100:1 range)"
- AVCOL_TRC_LOG_SQRT = 10, ///< "Logarithmic transfer characteristic (100 * Sqrt( 10 ) : 1 range)"
- AVCOL_TRC_IEC61966_2_4 = 11, ///< IEC 61966-2-4
- AVCOL_TRC_BT1361_ECG = 12, ///< ITU-R BT1361 Extended Colour Gamut
- AVCOL_TRC_IEC61966_2_1 = 13, ///< IEC 61966-2-1 (sRGB or sYCC)
- AVCOL_TRC_BT2020_10 = 14, ///< ITU-R BT2020 for 10 bit system
- AVCOL_TRC_BT2020_12 = 15, ///< ITU-R BT2020 for 12 bit system
- AVCOL_TRC_NB , ///< Not part of ABI
-};
-
-enum AVColorSpace{
- AVCOL_SPC_RGB = 0,
- AVCOL_SPC_BT709 = 1, ///< also ITU-R BT1361 / IEC 61966-2-4 xvYCC709 / SMPTE RP177 Annex B
- AVCOL_SPC_UNSPECIFIED = 2,
- AVCOL_SPC_FCC = 4,
- AVCOL_SPC_BT470BG = 5, ///< also ITU-R BT601-6 625 / ITU-R BT1358 625 / ITU-R BT1700 625 PAL & SECAM / IEC 61966-2-4 xvYCC601
- AVCOL_SPC_SMPTE170M = 6, ///< also ITU-R BT601-6 525 / ITU-R BT1358 525 / ITU-R BT1700 NTSC / functionally identical to above
- AVCOL_SPC_SMPTE240M = 7,
- AVCOL_SPC_YCOCG = 8, ///< Used by Dirac / VC-2 and H.264 FRext, see ITU-T SG16
- AVCOL_SPC_BT2020_NCL = 9, ///< ITU-R BT2020 non-constant luminance system
- AVCOL_SPC_BT2020_CL = 10, ///< ITU-R BT2020 constant luminance system
- AVCOL_SPC_NB , ///< Not part of ABI
-};
-
-enum AVColorRange{
- AVCOL_RANGE_UNSPECIFIED = 0,
- AVCOL_RANGE_MPEG = 1, ///< the normal 219*2^(n-8) "MPEG" YUV ranges
- AVCOL_RANGE_JPEG = 2, ///< the normal 2^n-1 "JPEG" YUV ranges
- AVCOL_RANGE_NB , ///< Not part of ABI
-};
-
-/**
- * X X 3 4 X X are luma samples,
- * 1 2 1-6 are possible chroma positions
- * X X 5 6 X 0 is undefined/unknown position
- */
-enum AVChromaLocation{
- AVCHROMA_LOC_UNSPECIFIED = 0,
- AVCHROMA_LOC_LEFT = 1, ///< mpeg2/4, h264 default
- AVCHROMA_LOC_CENTER = 2, ///< mpeg1, jpeg, h263
- AVCHROMA_LOC_TOPLEFT = 3, ///< DV
- AVCHROMA_LOC_TOP = 4,
- AVCHROMA_LOC_BOTTOMLEFT = 5,
- AVCHROMA_LOC_BOTTOM = 6,
- AVCHROMA_LOC_NB , ///< Not part of ABI
-};
-
enum AVAudioServiceType {
AV_AUDIO_SERVICE_TYPE_MAIN = 0,
AV_AUDIO_SERVICE_TYPE_EFFECTS = 1,
Note: Not everything is supported yet.
*/
+/**
+ * Allow decoders to produce frames with data planes that are not aligned
+ * to CPU requirements (e.g. due to cropping).
+ */
+#define AV_CODEC_FLAG_UNALIGNED (1 << 0)
+/**
+ * Use fixed qscale.
+ */
+#define AV_CODEC_FLAG_QSCALE (1 << 1)
+/**
+ * 4 MV per MB allowed / advanced prediction for H.263.
+ */
+#define AV_CODEC_FLAG_4MV (1 << 2)
+/**
+ * Output even those frames that might be corrupted.
+ */
+#define AV_CODEC_FLAG_OUTPUT_CORRUPT (1 << 3)
+/**
+ * Use qpel MC.
+ */
+#define AV_CODEC_FLAG_QPEL (1 << 4)
+/**
+ * Use internal 2pass ratecontrol in first pass mode.
+ */
+#define AV_CODEC_FLAG_PASS1 (1 << 9)
+/**
+ * Use internal 2pass ratecontrol in second pass mode.
+ */
+#define AV_CODEC_FLAG_PASS2 (1 << 10)
+/**
+ * loop filter.
+ */
+#define AV_CODEC_FLAG_LOOP_FILTER (1 << 11)
+/**
+ * Only decode/encode grayscale.
+ */
+#define AV_CODEC_FLAG_GRAY (1 << 13)
+/**
+ * error[?] variables will be set during encoding.
+ */
+#define AV_CODEC_FLAG_PSNR (1 << 15)
+/**
+ * Input bitstream might be truncated at a random location
+ * instead of only at frame boundaries.
+ */
+#define AV_CODEC_FLAG_TRUNCATED (1 << 16)
+/**
+ * Use interlaced DCT.
+ */
+#define AV_CODEC_FLAG_INTERLACED_DCT (1 << 18)
+/**
+ * Force low delay.
+ */
+#define AV_CODEC_FLAG_LOW_DELAY (1 << 19)
+/**
+ * Place global headers in extradata instead of every keyframe.
+ */
+#define AV_CODEC_FLAG_GLOBAL_HEADER (1 << 22)
+/**
+ * Use only bitexact stuff (except (I)DCT).
+ */
+#define AV_CODEC_FLAG_BITEXACT (1 << 23)
+/* Fx : Flag for h263+ extra options */
+/**
+ * H.263 advanced intra coding / MPEG-4 AC prediction
+ */
+#define AV_CODEC_FLAG_AC_PRED (1 << 24)
+/**
+ * interlaced motion estimation
+ */
+#define AV_CODEC_FLAG_INTERLACED_ME (1 << 29)
+/**
+ * Allow non spec compliant speedup tricks.
+ */
+#define AV_CODEC_FLAG_CLOSED_GOP (1 << 31)
+
+#define AV_CODEC_FLAG2_FAST (1 << 0)
+/**
+ * Skip bitstream encoding.
+ */
+#define AV_CODEC_FLAG2_NO_OUTPUT (1 << 2)
+/**
+ * Place global headers at every keyframe instead of in extradata.
+ */
+#define AV_CODEC_FLAG2_LOCAL_HEADER (1 << 3)
+/**
+ * Input bitstream might be truncated at a packet boundaries
+ * instead of only at frame boundaries.
+ */
+#define AV_CODEC_FLAG2_CHUNKS (1 << 15)
+/**
+ * Discard cropping information from SPS.
+ */
+#define AV_CODEC_FLAG2_IGNORE_CROP (1 << 16)
+
+/* Unsupported options :
+ * Syntax Arithmetic coding (SAC)
+ * Reference Picture Selection
+ * Independent Segment Decoding */
+/* /Fx */
+/* codec capabilities */
+
+/**
+ * Decoder can use draw_horiz_band callback.
+ */
+#define AV_CODEC_CAP_DRAW_HORIZ_BAND (1 << 0)
+/**
+ * Codec uses get_buffer() for allocating buffers and supports custom allocators.
+ * If not set, it might not use get_buffer() at all or use operations that
+ * assume the buffer was allocated by avcodec_default_get_buffer.
+ */
+#define AV_CODEC_CAP_DR1 (1 << 1)
+#define AV_CODEC_CAP_TRUNCATED (1 << 3)
+/**
+ * Encoder or decoder requires flushing with NULL input at the end in order to
+ * give the complete and correct output.
+ *
+ * NOTE: If this flag is not set, the codec is guaranteed to never be fed with
+ * with NULL data. The user can still send NULL data to the public encode
+ * or decode function, but libavcodec will not pass it along to the codec
+ * unless this flag is set.
+ *
+ * Decoders:
+ * The decoder has a non-zero delay and needs to be fed with avpkt->data=NULL,
+ * avpkt->size=0 at the end to get the delayed data until the decoder no longer
+ * returns frames.
+ *
+ * Encoders:
+ * The encoder needs to be fed with NULL data at the end of encoding until the
+ * encoder no longer returns data.
+ *
+ * NOTE: For encoders implementing the AVCodec.encode2() function, setting this
+ * flag also means that the encoder must set the pts and duration for
+ * each output packet. If this flag is not set, the pts and duration will
+ * be determined by libavcodec from the input frame.
+ */
+#define AV_CODEC_CAP_DELAY (1 << 5)
+/**
+ * Codec can be fed a final frame with a smaller size.
+ * This can be used to prevent truncation of the last audio samples.
+ */
+#define AV_CODEC_CAP_SMALL_LAST_FRAME (1 << 6)
+/**
+ * Codec can output multiple frames per AVPacket
+ * Normally demuxers return one frame at a time, demuxers which do not do
+ * are connected to a parser to split what they return into proper frames.
+ * This flag is reserved to the very rare category of codecs which have a
+ * bitstream that cannot be split into frames without timeconsuming
+ * operations like full decoding. Demuxers carring such bitstreams thus
+ * may return multiple frames in a packet. This has many disadvantages like
+ * prohibiting stream copy in many cases thus it should only be considered
+ * as a last resort.
+ */
+#define AV_CODEC_CAP_SUBFRAMES (1 << 8)
+/**
+ * Codec is experimental and is thus avoided in favor of non experimental
+ * encoders
+ */
+#define AV_CODEC_CAP_EXPERIMENTAL (1 << 9)
+/**
+ * Codec should fill in channel configuration and samplerate instead of container
+ */
+#define AV_CODEC_CAP_CHANNEL_CONF (1 << 10)
+/**
+ * Codec supports frame-level multithreading.
+ */
+#define AV_CODEC_CAP_FRAME_THREADS (1 << 12)
+/**
+ * Codec supports slice-based (or partition-based) multithreading.
+ */
+#define AV_CODEC_CAP_SLICE_THREADS (1 << 13)
+/**
+ * Codec supports changed parameters at any point.
+ */
+#define AV_CODEC_CAP_PARAM_CHANGE (1 << 14)
+/**
+ * Codec supports avctx->thread_count == 0 (auto).
+ */
+#define AV_CODEC_CAP_AUTO_THREADS (1 << 15)
+/**
+ * Audio encoder supports receiving a different number of samples in each call.
+ */
+#define AV_CODEC_CAP_VARIABLE_FRAME_SIZE (1 << 16)
+
+#if FF_API_WITHOUT_PREFIX
/**
* Allow decoders to produce frames with data planes that are not aligned
* to CPU requirements (e.g. due to cropping).
* Audio encoder supports receiving a different number of samples in each call.
*/
#define CODEC_CAP_VARIABLE_FRAME_SIZE 0x10000
+#endif /* FF_API_WITHOUT_PREFIX */
#if FF_API_MB_TYPE
//The following defines may change, don't expect compatibility if you use them.
#define FF_QSCALE_TYPE_VP56 3
#endif
-#if FF_API_GET_BUFFER
-#define FF_BUFFER_TYPE_INTERNAL 1
-#define FF_BUFFER_TYPE_USER 2 ///< direct rendering buffers (image is (de)allocated by user)
-#define FF_BUFFER_TYPE_SHARED 4 ///< Buffer from somewhere else; don't deallocate image (data/base), all other tables are not shared.
-#define FF_BUFFER_TYPE_COPY 8 ///< Just a (modified) copy of some other buffer, don't deallocate anything.
-
-#define FF_BUFFER_HINTS_VALID 0x01 // Buffer hints value is meaningful (if 0 ignore).
-#define FF_BUFFER_HINTS_READABLE 0x02 // Codec will read from buffer.
-#define FF_BUFFER_HINTS_PRESERVE 0x04 // User must not alter buffer content.
-#define FF_BUFFER_HINTS_REUSABLE 0x08 // Codec will reuse the buffer (update).
-#endif
-
/**
* The decoder will keep a reference to the frame and may reuse it later.
*/
* ReplayGain information in form of the AVReplayGain struct.
*/
AV_PKT_DATA_REPLAYGAIN,
+
+ /**
+ * This side data contains a 3x3 transformation matrix describing an affine
+ * transformation that needs to be applied to the decoded video frames for
+ * correct presentation.
+ *
+ * See libavutil/display.h for a detailed description of the data.
+ */
+ AV_PKT_DATA_DISPLAYMATRIX,
+
+ /**
+ * This side data should be associated with a video stream and contains
+ * Stereoscopic 3D information in form of the AVStereo3D struct.
+ */
+ AV_PKT_DATA_STEREO3D,
+
+ /**
+ * This side data should be associated with an audio stream and corresponds
+ * to enum AVAudioServiceType.
+ */
+ AV_PKT_DATA_AUDIO_SERVICE_TYPE,
+
+ /**
+ * This side data contains an integer value representing the quality
+ * factor of the compressed frame. Allowed range is between 1 (good)
+ * and FF_LAMBDA_MAX (bad).
+ */
+ AV_PKT_DATA_QUALITY_FACTOR,
};
typedef struct AVPacketSideData {
* then passed to muxers.
*
* For video, it should typically contain one compressed frame. For audio it may
- * contain several compressed frames.
+ * contain several compressed frames. Encoders are allowed to output empty
+ * packets, with no compressed data, containing only side data
+ * (e.g. to update some stream parameters at the end of encoding).
*
* AVPacket is one of the few structs in Libav, whose size is a part of public
* ABI. Thus it may be allocated on stack and no new fields can be added to it
* Duration of this packet in AVStream->time_base units, 0 if unknown.
* Equals next_pts - this_pts in presentation order.
*/
- int duration;
-#if FF_API_DESTRUCT_PACKET
- attribute_deprecated
- void (*destruct)(struct AVPacket *);
- attribute_deprecated
- void *priv;
-#endif
+ int64_t duration;
+
int64_t pos; ///< byte position in stream, -1 if unknown
+#if FF_API_CONVERGENCE_DURATION
/**
- * Time difference in AVStream->time_base units from the pts of this
- * packet to the point at which the output from the decoder has converged
- * independent from the availability of previous frames. That is, the
- * frames are virtually identical no matter if decoding started from
- * the very first frame or from this keyframe.
- * Is AV_NOPTS_VALUE if unknown.
- * This field is not the display duration of the current packet.
- * This field has no meaning if the packet does not have AV_PKT_FLAG_KEY
- * set.
- *
- * The purpose of this field is to allow seeking in streams that have no
- * keyframes in the conventional sense. It corresponds to the
- * recovery point SEI in H.264 and match_time_delta in NUT. It is also
- * essential for some types of subtitle streams to ensure that all
- * subtitles are correctly displayed after seeking.
+ * @deprecated Same as the duration field, but as int64_t. This was required
+ * for Matroska subtitles, whose duration values could overflow when the
+ * duration field was still an int.
*/
+ attribute_deprecated
int64_t convergence_duration;
+#endif
} AVPacket;
#define AV_PKT_FLAG_KEY 0x0001 ///< The packet contains a keyframe
#define AV_PKT_FLAG_CORRUPT 0x0002 ///< The packet content is corrupted
*/
unsigned int codec_tag;
+#if FF_API_STREAM_CODEC_TAG
/**
- * fourcc from the AVI stream header (LSB first, so "ABCD" -> ('D'<<24) + ('C'<<16) + ('B'<<8) + 'A').
- * This is used to work around some encoder bugs.
- * - encoding: unused
- * - decoding: Set by user, will be converted to uppercase by libavcodec during init.
+ * @deprecated this field is unused
*/
+ attribute_deprecated
unsigned int stream_codec_tag;
+#endif
void *priv_data;
#define FF_COMPRESSION_DEFAULT -1
/**
- * CODEC_FLAG_*.
+ * AV_CODEC_FLAG_*.
* - encoding: Set by user.
* - decoding: Set by user.
*/
int flags;
/**
- * CODEC_FLAG2_*
+ * AV_CODEC_FLAG2_*
* - encoding: Set by user.
* - decoding: Set by user.
*/
* mjpeg: Huffman tables
* rv10: additional flags
* mpeg4: global headers (they can be in the bitstream or here)
- * The allocated memory should be FF_INPUT_BUFFER_PADDING_SIZE bytes larger
+ * The allocated memory should be AV_INPUT_BUFFER_PADDING_SIZE bytes larger
* than extradata_size to avoid prolems if it is read with the bitstream reader.
* The bytewise contents of extradata must not depend on the architecture or CPU endianness.
* - encoding: Set/allocated/freed by libavcodec.
* timebase should be 1/framerate and timestamp increments should be
* identically 1.
* - encoding: MUST be set by user.
- * - decoding: Set by libavcodec.
+ * - decoding: the use of this field for decoding is deprecated.
+ * Use framerate instead.
*/
AVRational time_base;
* encoded input.
*
* Audio:
- * For encoding, this is the number of "priming" samples added by the
- * encoder to the beginning of the stream. The decoded output will be
- * delayed by this many samples relative to the input to the encoder (or
- * more, if the decoder adds its own padding).
- * The timestamps on the output packets are adjusted by the encoder so
- * that they always refer to the first sample of the data actually
- * contained in the packet, including any added padding.
- * E.g. if the timebase is 1/samplerate and the timestamp of the first
- * input sample is 0, the timestamp of the first output packet will be
- * -delay.
+ * For encoding, this field is unused (see initial_padding).
*
* For decoding, this is the number of samples the decoder needs to
* output before the decoder's output is valid. When seeking, you should
/* video only */
/**
* picture width / height.
+ *
+ * @note Those fields may not match the values of the last
+ * AVFrame outputted by avcodec_decode_video2 due frame
+ * reordering.
+ *
* - encoding: MUST be set by user.
* - decoding: May be set by the user before opening the decoder if known e.g.
* from the container. Some decoders will require the dimensions
* to be set by the caller. During decoding, the decoder may
- * overwrite those values as required.
+ * overwrite those values as required while parsing the data.
*/
int width, height;
/**
* Bitstream width / height, may be different from width/height e.g. when
* the decoded frame is cropped before being output.
+ *
+ * @note Those field may not match the value of the last
+ * AVFrame outputted by avcodec_decode_video2 due frame
+ * reordering.
+ *
* - encoding: unused
* - decoding: May be set by the user before opening the decoder if known
* e.g. from the container. During decoding, the decoder may
- * overwrite those values as required.
+ * overwrite those values as required while parsing the data.
*/
int coded_width, coded_height;
* Pixel format, see AV_PIX_FMT_xxx.
* May be set by the demuxer if known from headers.
* May be overriden by the decoder if it knows better.
+ *
+ * @note This field may not match the value of the last
+ * AVFrame outputted by avcodec_decode_video2 due frame
+ * reordering.
+ *
* - encoding: Set by user.
- * - decoding: Set by user if known, overridden by libavcodec if known
+ * - decoding: Set by user if known, overridden by libavcodec while
+ * parsing the data.
*/
enum AVPixelFormat pix_fmt;
+#if FF_API_MOTION_EST
/**
- * Motion estimation algorithm used for video coding.
- * 1 (zero), 2 (full), 3 (log), 4 (phods), 5 (epzs), 6 (x1), 7 (hex),
- * 8 (umh), 10 (tesa) [7, 8, 10 are x264 specific]
- * - encoding: MUST be set by user.
- * - decoding: unused
+ * This option does nothing
+ * @deprecated use codec private options instead
*/
- int me_method;
+ attribute_deprecated int me_method;
+#endif
/**
* If non NULL, 'draw_horiz_band' is called by the libavcodec
* @param fmt is the list of formats which are supported by the codec,
* it is terminated by -1 as 0 is a valid format, the formats are ordered by quality.
* The first is always the native one.
+ * @note The callback may be called again immediately if initialization for
+ * the selected (hardware-accelerated) pixel format failed.
+ * @warning Behavior is undefined if the callback returns a value not
+ * in the fmt list of formats.
* @return the chosen format
* - encoding: unused
* - decoding: Set by user, if not set the native format will be chosen.
*/
float b_quant_factor;
- /** obsolete FIXME remove */
- int rc_strategy;
+#if FF_API_RC_STRATEGY
+ /** @deprecated use codec private option instead */
+ attribute_deprecated int rc_strategy;
#define FF_RC_STRATEGY_XVID 1
+#endif
int b_frame_strategy;
*/
int me_subpel_quality;
+#if FF_API_AFD
/**
* DTG active format information (additional aspect ratio
* information only used in DVB MPEG-2 transport streams)
*
* - encoding: unused
* - decoding: Set by decoder.
+ * @deprecated Deprecated in favor of AVSideData
*/
- int dtg_active_format;
+ attribute_deprecated int dtg_active_format;
#define FF_DTG_AFD_SAME 8
#define FF_DTG_AFD_4_3 9
#define FF_DTG_AFD_16_9 10
#define FF_DTG_AFD_4_3_SP_14_9 13
#define FF_DTG_AFD_16_9_SP_14_9 14
#define FF_DTG_AFD_SP_4_3 15
+#endif /* FF_API_AFD */
/**
* maximum motion estimation search range in subpel units
*/
int me_range;
+#if FF_API_QUANT_BIAS
/**
- * intra quantizer bias
- * - encoding: Set by user.
- * - decoding: unused
+ * @deprecated use encoder private option instead
*/
- int intra_quant_bias;
+ attribute_deprecated int intra_quant_bias;
#define FF_DEFAULT_QUANT_BIAS 999999
/**
- * inter quantizer bias
- * - encoding: Set by user.
- * - decoding: unused
+ * @deprecated use encoder private option instead
*/
- int inter_quant_bias;
+ attribute_deprecated int inter_quant_bias;
+#endif
/**
* slice flags
*/
int noise_reduction;
+#if FF_API_MPV_OPT
/**
- * Motion estimation threshold below which no motion estimation is
- * performed, but instead the user specified motion vectors are used.
- *
- * - encoding: Set by user.
- * - decoding: unused
+ * @deprecated this field is unused
*/
+ attribute_deprecated
int me_threshold;
/**
- * Macroblock threshold below which the user specified macroblock types will be used.
- * - encoding: Set by user.
- * - decoding: unused
+ * @deprecated this field is unused
*/
+ attribute_deprecated
int mb_threshold;
+#endif
/**
* precision of the intra DC coefficient - 8
*/
int skip_bottom;
+#if FF_API_MPV_OPT
/**
- * Border processing masking, raises the quantizer for mbs on the borders
- * of the picture.
- * - encoding: Set by user.
- * - decoding: unused
+ * @deprecated use encoder private options instead
*/
+ attribute_deprecated
float border_masking;
+#endif
/**
* minimum MB lagrange multipler
*/
int chromaoffset;
+#if FF_API_UNUSED_MEMBERS
/**
* Multiplied by qscale for each frame and added to scene_change_score.
* - encoding: Set by user.
* - decoding: unused
*/
- int scenechange_factor;
+ attribute_deprecated int scenechange_factor;
+#endif
/**
*
*
* - encoding: set by libavcodec in avcodec_open2(). Each submitted frame
* except the last must contain exactly frame_size samples per channel.
- * May be 0 when the codec has CODEC_CAP_VARIABLE_FRAME_SIZE set, then the
+ * May be 0 when the codec has AV_CODEC_CAP_VARIABLE_FRAME_SIZE set, then the
* frame size is not restricted.
* - decoding: may be set by some decoders to indicate constant frame size
*/
*/
int cutoff;
-#if FF_API_REQUEST_CHANNELS
- /**
- * Decoder should decode to this many channels if it can (0 for default)
- * - encoding: unused
- * - decoding: Set by user.
- * @deprecated Deprecated in favor of request_channel_layout.
- */
- attribute_deprecated int request_channels;
-#endif
-
/**
* Audio channel layout.
* - encoding: set by user.
*/
enum AVSampleFormat request_sample_fmt;
-#if FF_API_GET_BUFFER
- /**
- * Called at the beginning of each frame to get a buffer for it.
- *
- * The function will set AVFrame.data[], AVFrame.linesize[].
- * AVFrame.extended_data[] must also be set, but it should be the same as
- * AVFrame.data[] except for planar audio with more channels than can fit
- * in AVFrame.data[]. In that case, AVFrame.data[] shall still contain as
- * many data pointers as it can hold.
- *
- * if CODEC_CAP_DR1 is not set then get_buffer() must call
- * avcodec_default_get_buffer() instead of providing buffers allocated by
- * some other means.
- *
- * AVFrame.data[] should be 32- or 16-byte-aligned unless the CPU doesn't
- * need it. avcodec_default_get_buffer() aligns the output buffer properly,
- * but if get_buffer() is overridden then alignment considerations should
- * be taken into account.
- *
- * @see avcodec_default_get_buffer()
- *
- * Video:
- *
- * If pic.reference is set then the frame will be read later by libavcodec.
- * avcodec_align_dimensions2() should be used to find the required width and
- * height, as they normally need to be rounded up to the next multiple of 16.
- *
- * If frame multithreading is used and thread_safe_callbacks is set,
- * it may be called from a different thread, but not from more than one at
- * once. Does not need to be reentrant.
- *
- * @see release_buffer(), reget_buffer()
- * @see avcodec_align_dimensions2()
- *
- * Audio:
- *
- * Decoders request a buffer of a particular size by setting
- * AVFrame.nb_samples prior to calling get_buffer(). The decoder may,
- * however, utilize only part of the buffer by setting AVFrame.nb_samples
- * to a smaller value in the output frame.
- *
- * Decoders cannot use the buffer after returning from
- * avcodec_decode_audio4(), so they will not call release_buffer(), as it
- * is assumed to be released immediately upon return. In some rare cases,
- * a decoder may need to call get_buffer() more than once in a single
- * call to avcodec_decode_audio4(). In that case, when get_buffer() is
- * called again after it has already been called once, the previously
- * acquired buffer is assumed to be released at that time and may not be
- * reused by the decoder.
- *
- * As a convenience, av_samples_get_buffer_size() and
- * av_samples_fill_arrays() in libavutil may be used by custom get_buffer()
- * functions to find the required data size and to fill data pointers and
- * linesize. In AVFrame.linesize, only linesize[0] may be set for audio
- * since all planes must be the same size.
- *
- * @see av_samples_get_buffer_size(), av_samples_fill_arrays()
- *
- * - encoding: unused
- * - decoding: Set by libavcodec, user can override.
- *
- * @deprecated use get_buffer2()
- */
- attribute_deprecated
- int (*get_buffer)(struct AVCodecContext *c, AVFrame *pic);
-
- /**
- * Called to release buffers which were allocated with get_buffer.
- * A released buffer can be reused in get_buffer().
- * pic.data[*] must be set to NULL.
- * May be called from a different thread if frame multithreading is used,
- * but not by more than one thread at once, so does not need to be reentrant.
- * - encoding: unused
- * - decoding: Set by libavcodec, user can override.
- *
- * @deprecated custom freeing callbacks should be set from get_buffer2()
- */
- attribute_deprecated
- void (*release_buffer)(struct AVCodecContext *c, AVFrame *pic);
-
- /**
- * Called at the beginning of a frame to get cr buffer for it.
- * Buffer type (size, hints) must be the same. libavcodec won't check it.
- * libavcodec will pass previous buffer in pic, function should return
- * same buffer or new buffer with old frame "painted" into it.
- * If pic.data[0] == NULL must behave like get_buffer().
- * if CODEC_CAP_DR1 is not set then reget_buffer() must call
- * avcodec_default_reget_buffer() instead of providing buffers allocated by
- * some other means.
- * - encoding: unused
- * - decoding: Set by libavcodec, user can override.
- */
- attribute_deprecated
- int (*reget_buffer)(struct AVCodecContext *c, AVFrame *pic);
-#endif
-
/**
* This callback is called at the beginning of each frame to get data
* buffer(s) for it. There may be one contiguous buffer for all the data or
* buffers than buf[] can hold. extended_buf will be freed in
* av_frame_unref().
*
- * If CODEC_CAP_DR1 is not set then get_buffer2() must call
+ * If AV_CODEC_CAP_DR1 is not set then get_buffer2() must call
* avcodec_default_get_buffer2() instead of providing buffers allocated by
* some other means.
*
*/
int max_qdiff;
+#if FF_API_MPV_OPT
/**
- * ratecontrol qmin qmax limiting method
- * 0-> clipping, 1-> use a nice continuous function to limit qscale wthin qmin/qmax.
- * - encoding: Set by user.
- * - decoding: unused
+ * @deprecated use encoder private options instead
*/
+ attribute_deprecated
float rc_qsquish;
+ attribute_deprecated
float rc_qmod_amp;
+ attribute_deprecated
int rc_qmod_freq;
+#endif
/**
* decoder bitstream buffer size
int rc_override_count;
RcOverride *rc_override;
+#if FF_API_MPV_OPT
/**
- * rate control equation
- * - encoding: Set by user
- * - decoding: unused
+ * @deprecated use encoder private options instead
*/
+ attribute_deprecated
const char *rc_eq;
+#endif
/**
* maximum bitrate
*/
int rc_min_rate;
- float rc_buffer_aggressivity;
-
+#if FF_API_MPV_OPT
/**
- * initial complexity for pass1 ratecontrol
- * - encoding: Set by user.
- * - decoding: unused
+ * @deprecated use encoder private options instead
*/
+ attribute_deprecated
+ float rc_buffer_aggressivity;
+
+ attribute_deprecated
float rc_initial_cplx;
+#endif
/**
* Ratecontrol attempt to use, at maximum, <value> of what can be used without an underflow.
#define FF_CODER_TYPE_AC 1
#define FF_CODER_TYPE_RAW 2
#define FF_CODER_TYPE_RLE 3
+#if FF_API_UNUSED_MEMBERS
#define FF_CODER_TYPE_DEFLATE 4
+#endif /* FF_API_UNUSED_MEMBERS */
/**
* coder type
* - encoding: Set by user.
*/
int context_model;
+#if FF_API_MPV_OPT
/**
- * minimum Lagrange multipler
- * - encoding: Set by user.
- * - decoding: unused
+ * @deprecated use encoder private options instead
*/
+ attribute_deprecated
int lmin;
/**
- * maximum Lagrange multipler
- * - encoding: Set by user.
- * - decoding: unused
+ * @deprecated use encoder private options instead
*/
+ attribute_deprecated
int lmax;
+#endif
/**
* frame skip threshold
#define FF_DEBUG_DCT_COEFF 0x00000040
#define FF_DEBUG_SKIP 0x00000080
#define FF_DEBUG_STARTCODE 0x00000100
+#if FF_API_UNUSED_MEMBERS
#define FF_DEBUG_PTS 0x00000200
+#endif /* FF_API_UNUSED_MEMBERS */
#define FF_DEBUG_ER 0x00000400
#define FF_DEBUG_MMCO 0x00000800
#define FF_DEBUG_BUGS 0x00001000
/**
* opaque 64bit number (generally a PTS) that will be reordered and
* output in AVFrame.reordered_opaque
- * @deprecated in favor of pkt_pts
* - encoding: unused
* - decoding: Set by user.
*/
/**
* error
- * - encoding: Set by libavcodec if flags&CODEC_FLAG_PSNR.
+ * - encoding: Set by libavcodec if flags & AV_CODEC_FLAG_PSNR.
* - decoding: unused
*/
uint64_t error[AV_NUM_DATA_POINTERS];
#define FF_IDCT_SH4 9
#endif
#define FF_IDCT_SIMPLEARM 10
+#if FF_API_UNUSED_MEMBERS
#define FF_IDCT_IPP 13
+#endif /* FF_API_UNUSED_MEMBERS */
+#define FF_IDCT_XVID 14
+#if FF_API_IDCT_XVIDMMX
#define FF_IDCT_XVIDMMX 14
+#endif /* FF_API_IDCT_XVIDMMX */
#define FF_IDCT_SIMPLEARMV5TE 16
#define FF_IDCT_SIMPLEARMV6 17
#if FF_API_ARCH_SPARC
attribute_deprecated int lowres;
#endif
+#if FF_API_CODED_FRAME
/**
* the picture in the bitstream
* - encoding: Set by libavcodec.
* - decoding: unused
+ *
+ * @deprecated use the quality factor packet side data instead
*/
- AVFrame *coded_frame;
+ attribute_deprecated AVFrame *coded_frame;
+#endif
/**
* thread count
*/
int (*execute2)(struct AVCodecContext *c, int (*func)(struct AVCodecContext *c2, void *arg, int jobnr, int threadnr), void *arg2, int *ret, int count);
-#if FF_API_THREAD_OPAQUE
- /**
- * @deprecated this field should not be used from outside of lavc
- */
- attribute_deprecated
- void *thread_opaque;
-#endif
-
/**
* noise vs. sse weight for the nsse comparsion function
* - encoding: Set by user.
#define FF_PROFILE_DTS_96_24 40
#define FF_PROFILE_DTS_HD_HRA 50
#define FF_PROFILE_DTS_HD_MA 60
+#define FF_PROFILE_DTS_EXPRESS 70
#define FF_PROFILE_MPEG2_422 0
#define FF_PROFILE_MPEG2_HIGH 1
#define FF_PROFILE_JPEG2000_DCINEMA_2K 3
#define FF_PROFILE_JPEG2000_DCINEMA_4K 4
+#define FF_PROFILE_VP9_0 0
+#define FF_PROFILE_VP9_1 1
+#define FF_PROFILE_VP9_2 2
+#define FF_PROFILE_VP9_3 3
#define FF_PROFILE_HEVC_MAIN 1
#define FF_PROFILE_HEVC_MAIN_10 2
int error_rate;
#endif
-#if FF_API_CODEC_PKT
- /**
- * @deprecated this field is not supposed to be accessed from outside lavc
- */
- attribute_deprecated
- AVPacket *pkt;
-#endif
-
/**
* VBV delay coded in the last frame (in periods of a 27 MHz clock).
* Used for compliant TS muxing.
* - decoding: unused.
*/
uint64_t vbv_delay;
+
+#if FF_API_SIDEDATA_ONLY_PKT
+ /**
+ * Encoding only and set by default. Allow encoders to output packets
+ * that do not contain any encoded data, only side data.
+ *
+ * Some encoders need to output such packets, e.g. to update some stream
+ * parameters at the end of encoding.
+ *
+ * @deprecated this field disables the default behaviour and
+ * it is kept only for compatibility.
+ */
+ attribute_deprecated
+ int side_data_only_packets;
+#endif
+
+ /**
+ * Audio only. The number of "priming" samples (padding) inserted by the
+ * encoder at the beginning of the audio. I.e. this number of leading
+ * decoded samples must be discarded by the caller to get the original audio
+ * without leading padding.
+ *
+ * - decoding: unused
+ * - encoding: Set by libavcodec. The timestamps on the output packets are
+ * adjusted by the encoder so that they always refer to the
+ * first sample of the data actually contained in the packet,
+ * including any added padding. E.g. if the timebase is
+ * 1/samplerate and the timestamp of the first input sample is
+ * 0, the timestamp of the first output packet will be
+ * -initial_padding.
+ */
+ int initial_padding;
+
+ /*
+ * - decoding: For codecs that store a framerate value in the compressed
+ * bitstream, the decoder may export it here. { 0, 1} when
+ * unknown.
+ * - encoding: unused
+ */
+ AVRational framerate;
+
+ /**
+ * Nominal unaccelerated pixel format, see AV_PIX_FMT_xxx.
+ * - encoding: unused.
+ * - decoding: Set by libavcodec before calling get_format()
+ */
+ enum AVPixelFormat sw_pix_fmt;
} AVCodecContext;
/**
enum AVCodecID id;
/**
* Codec capabilities.
- * see CODEC_CAP_*
+ * see AV_CODEC_CAP_*
*/
int capabilities;
const AVRational *supported_framerates; ///< array of supported framerates, or NULL if any, array is terminated by {0,0}
* Will be called when seeking
*/
void (*flush)(AVCodecContext *);
+ /**
+ * Internal codec capabilities.
+ * See FF_CODEC_CAP_* in internal.h
+ */
+ int caps_internal;
} AVCodec;
/**
- * AVHWAccel.
+ * @defgroup lavc_hwaccel AVHWAccel
+ * @{
*/
typedef struct AVHWAccel {
/**
int priv_data_size;
} AVHWAccel;
+/**
+ * Hardware acceleration should be used for decoding even if the codec level
+ * used is unknown or higher than the maximum supported level reported by the
+ * hardware driver.
+ */
+#define AV_HWACCEL_FLAG_IGNORE_LEVEL (1 << 0)
+
+/**
+ * Hardware acceleration can output YUV pixel formats with a different chroma
+ * sampling than 4:2:0 and/or other than 8 bits per component.
+ */
+#define AV_HWACCEL_FLAG_ALLOW_HIGH_DEPTH (1 << 1)
+
+/**
+ * @}
+ */
+
/**
* @defgroup lavc_picture AVPicture
*
*/
int avcodec_copy_context(AVCodecContext *dest, const AVCodecContext *src);
-#if FF_API_AVFRAME_LAVC
-/**
- * @deprecated use av_frame_alloc()
- */
-attribute_deprecated
-AVFrame *avcodec_alloc_frame(void);
-
-/**
- * Set the fields of the given AVFrame to default values.
- *
- * @param frame The AVFrame of which the fields should be set to default values.
- *
- * @deprecated use av_frame_unref()
- */
-attribute_deprecated
-void avcodec_get_frame_defaults(AVFrame *frame);
-
-/**
- * Free the frame and any dynamically allocated objects in it,
- * e.g. extended_data.
- *
- * @param frame frame to be freed. The pointer will be set to NULL.
- *
- * @warning this function does NOT free the data buffers themselves
- * (it does not know how, since they might have been allocated with
- * a custom get_buffer()).
- *
- * @deprecated use av_frame_free()
- */
-attribute_deprecated
-void avcodec_free_frame(AVFrame **frame);
-#endif
-
/**
* Initialize the AVCodecContext to use the given AVCodec. Prior to using this
* function the context has to be allocated with avcodec_alloc_context3().
*
* @warning This function is not thread safe!
*
+ * @note Always call this function before using decoding routines (such as
+ * @ref avcodec_decode_video2()).
+ *
* @code
* avcodec_register_all();
* av_dict_set(&opts, "b", "2.5M", 0);
* @{
*/
-#if FF_API_DESTRUCT_PACKET
-/**
- * Default packet destructor.
- * @deprecated use the AVBuffer API instead
- */
-attribute_deprecated
-void av_destruct_packet(AVPacket *pkt);
-#endif
-
/**
* Initialize optional fields of a packet with default values.
*
* function returns successfully, the data is owned by the underlying AVBuffer.
* The caller may not access the data through other means.
* @param size size of data in bytes, without the padding. I.e. the full buffer
- * size is assumed to be size + FF_INPUT_BUFFER_PADDING_SIZE.
+ * size is assumed to be size + AV_INPUT_BUFFER_PADDING_SIZE.
*
* @return 0 on success, a negative AVERROR on error
*/
*/
int av_packet_copy_props(AVPacket *dst, const AVPacket *src);
+/**
+ * Convert valid timing fields (timestamps / durations) in a packet from one
+ * timebase to another. Timestamps with unknown values (AV_NOPTS_VALUE) will be
+ * ignored.
+ *
+ * @param pkt packet on which the conversion will be performed
+ * @param tb_src source timebase, in which the timing fields in pkt are
+ * expressed
+ * @param tb_dst destination timebase, to which the timing fields will be
+ * converted
+ */
+void av_packet_rescale_ts(AVPacket *pkt, AVRational tb_src, AVRational tb_dst);
+
/**
* @}
*/
*/
AVCodec *avcodec_find_decoder_by_name(const char *name);
-#if FF_API_GET_BUFFER
-attribute_deprecated int avcodec_default_get_buffer(AVCodecContext *s, AVFrame *pic);
-attribute_deprecated void avcodec_default_release_buffer(AVCodecContext *s, AVFrame *pic);
-attribute_deprecated int avcodec_default_reget_buffer(AVCodecContext *s, AVFrame *pic);
-#endif
-
/**
* The default callback for AVCodecContext.get_buffer2(). It is made public so
* it can be called by custom get_buffer2() implementations for decoders without
- * CODEC_CAP_DR1 set.
+ * AV_CODEC_CAP_DR1 set.
*/
int avcodec_default_get_buffer2(AVCodecContext *s, AVFrame *frame, int flags);
* buffer that is acceptable for the codec if you do not use any horizontal
* padding.
*
- * May only be used if a codec with CODEC_CAP_DR1 has been opened.
+ * May only be used if a codec with AV_CODEC_CAP_DR1 has been opened.
*/
void avcodec_align_dimensions(AVCodecContext *s, int *width, int *height);
* buffer that is acceptable for the codec if you also ensure that all
* line sizes are a multiple of the respective linesize_align[i].
*
- * May only be used if a codec with CODEC_CAP_DR1 has been opened.
+ * May only be used if a codec with AV_CODEC_CAP_DR1 has been opened.
*/
void avcodec_align_dimensions2(AVCodecContext *s, int *width, int *height,
int linesize_align[AV_NUM_DATA_POINTERS]);
* needs to be fed to the decoder with remaining data until it is completely
* consumed or an error occurs.
*
- * Some decoders (those marked with CODEC_CAP_DELAY) have a delay between input
+ * Some decoders (those marked with AV_CODEC_CAP_DELAY) have a delay between input
* and output. This means that for some packets they will not immediately
* produce decoded output and need to be flushed at the end of decoding to get
* all the decoded data. Flushing is done by calling this function with packets
* with avpkt->data set to NULL and avpkt->size set to 0 until it stops
* returning samples. It is safe to flush even those decoders that are not
- * marked with CODEC_CAP_DELAY, then no samples will be returned.
+ * marked with AV_CODEC_CAP_DELAY, then no samples will be returned.
*
- * @warning The input buffer, avpkt->data must be FF_INPUT_BUFFER_PADDING_SIZE
+ * @warning The input buffer, avpkt->data must be AV_INPUT_BUFFER_PADDING_SIZE
* larger than the actual read bytes because some optimized bitstream
* readers read 32 or 64 bits at once and could read over the end.
*
+ * @note The AVCodecContext MUST have been opened with @ref avcodec_open2()
+ * before packets may be fed to the decoder.
+ *
* @param avctx the codec context
* @param[out] frame The AVFrame in which to store decoded audio samples.
* The decoder will allocate a buffer for the decoded frame by
* @param[out] got_frame_ptr Zero if no frame could be decoded, otherwise it is
* non-zero. Note that this field being set to zero
* does not mean that an error has occurred. For
- * decoders with CODEC_CAP_DELAY set, no given decode
+ * decoders with AV_CODEC_CAP_DELAY set, no given decode
* call is guaranteed to produce a frame.
* @param[in] avpkt The input AVPacket containing the input buffer.
* At least avpkt->data and avpkt->size should be set. Some
* Some decoders may support multiple frames in a single AVPacket, such
* decoders would then just decode the first frame.
*
- * @warning The input buffer must be FF_INPUT_BUFFER_PADDING_SIZE larger than
+ * @warning The input buffer must be AV_INPUT_BUFFER_PADDING_SIZE larger than
* the actual read bytes because some optimized bitstream readers read 32 or 64
* bits at once and could read over the end.
*
* @warning The end of the input buffer buf should be set to 0 to ensure that
* no overreading happens for damaged MPEG streams.
*
- * @note Codecs which have the CODEC_CAP_DELAY capability set have a delay
+ * @note Codecs which have the AV_CODEC_CAP_DELAY capability set have a delay
* between input and output, these need to be fed with avpkt->data=NULL,
* avpkt->size=0 at the end to return the remaining frames.
*
+ * @note The AVCodecContext MUST have been opened with @ref avcodec_open2()
+ * before packets may be fed to the decoder.
+ *
* @param avctx the codec context
* @param[out] picture The AVFrame in which the decoded video frame will be stored.
* Use av_frame_alloc() to get an AVFrame. The codec will
* Return a negative value on error, otherwise return the number of bytes used.
* If no subtitle could be decompressed, got_sub_ptr is zero.
* Otherwise, the subtitle is stored in *sub.
- * Note that CODEC_CAP_DR1 is not available for subtitle codecs. This is for
+ * Note that AV_CODEC_CAP_DR1 is not available for subtitle codecs. This is for
* simplicity, because the performance difference is expect to be negligible
* and reusing a get_buffer written for video codecs would probably perform badly
* due to a potentially very different allocation pattern.
*
+ * @note The AVCodecContext MUST have been opened with @ref avcodec_open2()
+ * before packets may be fed to the decoder.
+ *
* @param avctx the codec context
* @param[out] sub The AVSubtitle in which the decoded subtitle will be stored, must be
freed with avsubtitle_free if *got_sub_ptr is set.
*/
int key_frame;
+#if FF_API_CONVERGENCE_DURATION
/**
- * Time difference in stream time base units from the pts of this
- * packet to the point at which the output from the decoder has converged
- * independent from the availability of previous frames. That is, the
- * frames are virtually identical no matter if decoding started from
- * the very first frame or from this keyframe.
- * Is AV_NOPTS_VALUE if unknown.
- * This field is not the display duration of the current frame.
- * This field has no meaning if the packet does not have AV_PKT_FLAG_KEY
- * set.
- *
- * The purpose of this field is to allow seeking in streams that have no
- * keyframes in the conventional sense. It corresponds to the
- * recovery point SEI in H.264 and match_time_delta in NUT. It is also
- * essential for some types of subtitle streams to ensure that all
- * subtitles are correctly displayed after seeking.
+ * @deprecated unused
*/
+ attribute_deprecated
int64_t convergence_duration;
+#endif
// Timestamp generation support:
/**
* For example, this corresponds to H.264 PicOrderCnt.
*/
int output_picture_number;
+
+ /**
+ * Dimensions of the decoded video intended for presentation.
+ */
+ int width;
+ int height;
+
+ /**
+ * Dimensions of the coded video.
+ */
+ int coded_width;
+ int coded_height;
+
+ /**
+ * The format of the coded data, corresponds to enum AVPixelFormat for video
+ * and for enum AVSampleFormat for audio.
+ *
+ * Note that a decoder can have considerable freedom in how exactly it
+ * decodes the data, so the format reported here might be different from the
+ * one returned by a decoder.
+ */
+ int format;
} AVCodecParserContext;
typedef struct AVCodecParser {
int codec_ids[5]; /* several codec IDs are permitted */
int priv_data_size;
int (*parser_init)(AVCodecParserContext *s);
+ /* This callback never returns an error, a negative value means that
+ * the frame start was in a previous packet. */
int (*parser_parse)(AVCodecParserContext *s,
AVCodecContext *avctx,
const uint8_t **poutbuf, int *poutbuf_size,
struct AVCodecParser *next;
} AVCodecParser;
-AVCodecParser *av_parser_next(AVCodecParser *c);
+AVCodecParser *av_parser_next(const AVCodecParser *c);
void av_register_codec_parser(AVCodecParser *parser);
AVCodecParserContext *av_parser_init(int codec_id);
* called to free the user supplied buffer).
* @param[in] frame AVFrame containing the raw audio data to be encoded.
* May be NULL when flushing an encoder that has the
- * CODEC_CAP_DELAY capability set.
- * If CODEC_CAP_VARIABLE_FRAME_SIZE is set, then each frame
+ * AV_CODEC_CAP_DELAY capability set.
+ * If AV_CODEC_CAP_VARIABLE_FRAME_SIZE is set, then each frame
* can have any number of samples.
* If it is not set, frame->nb_samples must be equal to
* avctx->frame_size for all frames except the last.
* called to free the user supplied buffer).
* @param[in] frame AVFrame containing the raw video data to be encoded.
* May be NULL when flushing an encoder that has the
- * CODEC_CAP_DELAY capability set.
+ * AV_CODEC_CAP_DELAY capability set.
* @param[out] got_packet_ptr This field is set to 1 by libavcodec if the
* output packet is non-empty, and to 0 if it is
* empty. If the function returns an error, the
void avpicture_free(AVPicture *picture);
/**
- * Fill in the AVPicture fields.
- * The fields of the given AVPicture are filled in by using the 'ptr' address
- * which points to the image data buffer. Depending on the specified picture
- * format, one or multiple image data pointers and line sizes will be set.
- * If a planar format is specified, several pointers will be set pointing to
- * the different picture planes and the line sizes of the different planes
- * will be stored in the lines_sizes array.
- * Call with ptr == NULL to get the required size for the ptr buffer.
- *
- * To allocate the buffer and fill in the AVPicture fields in one call,
- * use avpicture_alloc().
+ * Fill in the AVPicture fields, always assume a linesize alignment of 1.
*
- * @param picture AVPicture whose fields are to be filled in
- * @param ptr Buffer which will contain or contains the actual image data
- * @param pix_fmt The format in which the picture data is stored.
- * @param width the width of the image in pixels
- * @param height the height of the image in pixels
- * @return size of the image data in bytes
+ * @see av_image_fill_arrays().
*/
int avpicture_fill(AVPicture *picture, uint8_t *ptr,
enum AVPixelFormat pix_fmt, int width, int height);
/**
- * Copy pixel data from an AVPicture into a buffer.
- * The data is stored compactly, without any gaps for alignment or padding
- * which may be applied by avpicture_fill().
+ * Copy pixel data from an AVPicture into a buffer, always assume a
+ * linesize alignment of 1.
*
- * @see avpicture_get_size()
- *
- * @param[in] src AVPicture containing image data
- * @param[in] pix_fmt The format in which the picture data is stored.
- * @param[in] width the width of the image in pixels.
- * @param[in] height the height of the image in pixels.
- * @param[out] dest A buffer into which picture data will be copied.
- * @param[in] dest_size The size of 'dest'.
- * @return The number of bytes written to dest, or a negative value (error code) on error.
+ * @see av_image_copy_to_buffer().
*/
int avpicture_layout(const AVPicture* src, enum AVPixelFormat pix_fmt,
int width, int height,
/**
* Calculate the size in bytes that a picture of the given width and height
* would occupy if stored in the given picture format.
- * Note that this returns the size of a compact representation as generated
- * by avpicture_layout(), which can be smaller than the size required for e.g.
- * avpicture_fill().
+ * Always assume a linesize alignment of 1.
*
- * @param pix_fmt the given picture format
- * @param width the width of the image
- * @param height the height of the image
- * @return Image data size in bytes or -1 on error (e.g. too large dimensions).
+ * @see av_image_get_buffer_size().
*/
int avpicture_get_size(enum AVPixelFormat pix_fmt, int width, int height);
-#if FF_API_DEINTERLACE
-/**
- * deinterlace - if not supported return -1
- *
- * @deprecated - use yadif (in libavfilter) instead
- */
-attribute_deprecated
-int avpicture_deinterlace(AVPicture *dst, const AVPicture *src,
- enum AVPixelFormat pix_fmt, int width, int height);
-#endif
/**
* Copy image src to dst. Wraps av_picture_data_copy() above.
*/
const uint8_t *buf, int buf_size, int keyframe);
void av_bitstream_filter_close(AVBitStreamFilterContext *bsf);
-AVBitStreamFilter *av_bitstream_filter_next(AVBitStreamFilter *f);
+AVBitStreamFilter *av_bitstream_filter_next(const AVBitStreamFilter *f);
/* memory */
* Allocate a buffer with padding, reusing the given one if large enough.
*
* Same behaviour av_fast_malloc but the buffer has additional
- * FF_INPUT_PADDING_SIZE at the end which will always memset to 0.
+ * AV_INPUT_PADDING_SIZE at the end which will always memset to 0.
*
*/
void av_fast_padded_malloc(void *ptr, unsigned int *size, size_t min_size);
* if hwaccel is non-NULL, returns the next registered hardware accelerator
* after hwaccel, or NULL if hwaccel is the last one.
*/
-AVHWAccel *av_hwaccel_next(AVHWAccel *hwaccel);
+AVHWAccel *av_hwaccel_next(const AVHWAccel *hwaccel);
/**
/**
* Register a user provided lock manager supporting the operations
- * specified by AVLockOp. mutex points to a (void *) where the
- * lockmgr should store/get a pointer to a user allocated mutex. It's
- * NULL upon AV_LOCK_CREATE and != NULL for all other ops.
+ * specified by AVLockOp. The "mutex" argument to the function points
+ * to a (void *) where the lockmgr should store/get a pointer to a user
+ * allocated mutex. It is NULL upon AV_LOCK_CREATE and equal to the
+ * value left by the last call for all other ops. If the lock manager is
+ * unable to perform the op then it should leave the mutex in the same
+ * state as when it was called and return a non-zero value. However,
+ * when called with AV_LOCK_DESTROY the mutex will always be assumed to
+ * have been successfully destroyed. If av_lockmgr_register succeeds
+ * it will return a non-negative value, if it fails it will return a
+ * negative value and destroy all mutex and unregister all callbacks.
+ * av_lockmgr_register is not thread-safe, it must be called from a
+ * single thread before any calls which make use of locking are used.
*
- * @param cb User defined callback. Note: Libav may invoke calls to this
- * callback during the call to av_lockmgr_register().
- * Thus, the application must be prepared to handle that.
- * If cb is set to NULL the lockmgr will be unregistered.
- * Also note that during unregistration the previously registered
- * lockmgr callback may also be invoked.
+ * @param cb User defined callback. av_lockmgr_register invokes calls
+ * to this callback and the previously registered callback.
+ * The callback will be used to create more than one mutex
+ * each of which must be backed by its own underlying locking
+ * mechanism (i.e. do not use a single static object to
+ * implement your lock manager). If cb is set to NULL the
+ * lockmgr will be unregistered.
*/
int av_lockmgr_register(int (*cb)(void **mutex, enum AVLockOp op));
projects / ffmpeg / blobdiff