* @{
* @}
* @}
+ */
+
+/**
+ * @ingroup libavc
+ * @defgroup lavc_encdec send/receive encoding and decoding API overview
+ * @{
+ *
+ * The avcodec_send_packet()/avcodec_receive_frame()/avcodec_send_frame()/
+ * avcodec_receive_packet() functions provide an encode/decode API, which
+ * decouples input and output.
+ *
+ * The API is very similar for encoding/decoding and audio/video, and works as
+ * follows:
+ * - Set up and open the AVCodecContext as usual.
+ * - Send valid input:
+ * - For decoding, call avcodec_send_packet() to give the decoder raw
+ * compressed data in an AVPacket.
+ * - For encoding, call avcodec_send_frame() to give the decoder an AVFrame
+ * containing uncompressed audio or video.
+ * In both cases, it is recommended that AVPackets and AVFrames are
+ * refcounted, or libavcodec might have to copy the input data. (libavformat
+ * always returns refcounted AVPackets, and av_frame_get_buffer() allocates
+ * refcounted AVFrames.)
+ * - Receive output in a loop. Periodically call one of the avcodec_receive_*()
+ * functions and process their output:
+ * - For decoding, call avcodec_receive_frame(). On success, it will return
+ * an AVFrame containing uncompressed audio or video data.
+ * - For encoding, call avcodec_receive_packet(). On success, it will return
+ * an AVPacket with a compressed frame.
+ * Repeat this call until it returns AVERROR(EAGAIN) or an error. The
+ * AVERROR(EAGAIN) return value means that new input data is required to
+ * return new output. In this case, continue with sending input. For each
+ * input frame/packet, the codec will typically return 1 output frame/packet,
+ * but it can also be 0 or more than 1.
+ *
+ * At the beginning of decoding or encoding, the codec might accept multiple
+ * input frames/packets without returning a frame, until its internal buffers
+ * are filled. This situation is handled transparently if you follow the steps
+ * outlined above.
*
+ * End of stream situations. These require "flushing" (aka draining) the codec,
+ * as the codec might buffer multiple frames or packets internally for
+ * performance or out of necessity (consider B-frames).
+ * This is handled as follows:
+ * - Instead of valid input, send NULL to the avcodec_send_packet() (decoding)
+ * or avcodec_send_frame() (encoding) functions. This will enter draining
+ * mode.
+ * - Call avcodec_receive_frame() (decoding) or avcodec_receive_packet()
+ * (encoding) in a loop until AVERROR_EOF is returned. The functions will
+ * not return AVERROR(EAGAIN), unless you forgot to enter draining mode.
+ * - Before decoding can be resumed again, the codec has to be reset with
+ * avcodec_flush_buffers().
+ *
+ * Using the API as outlined above is highly recommended. But it is also
+ * possible to call functions outside of this rigid schema. For example, you can
+ * call avcodec_send_packet() repeatedly without calling
+ * avcodec_receive_frame(). In this case, avcodec_send_packet() will succeed
+ * until the codec's internal buffer has been filled up (which is typically of
+ * size 1 per output frame, after initial input), and then reject input with
+ * AVERROR(EAGAIN). Once it starts rejecting input, you have no choice but to
+ * read at least some output.
+ *
+ * Not all codecs will follow a rigid and predictable dataflow; the only
+ * guarantee is that an AVERROR(EAGAIN) return value on a send/receive call on
+ * one end implies that a receive/send call on the other end will succeed. In
+ * general, no codec will permit unlimited buffering of input or output.
+ *
+ * This API replaces the following legacy functions:
+ * - avcodec_decode_video2() and avcodec_decode_audio4():
+ * Use avcodec_send_packet() to feed input to the decoder, then use
+ * avcodec_receive_frame() to receive decoded frames after each packet.
+ * Unlike with the old video decoding API, multiple frames might result from
+ * a packet. For audio, splitting the input packet into frames by partially
+ * decoding packets becomes transparent to the API user. You never need to
+ * feed an AVPacket to the API twice.
+ * Additionally, sending a flush/draining packet is required only once.
+ * - avcodec_encode_video2()/avcodec_encode_audio2():
+ * Use avcodec_send_frame() to feed input to the encoder, then use
+ * avcodec_receive_packet() to receive encoded packets.
+ * Providing user-allocated buffers for avcodec_receive_packet() is not
+ * possible.
+ * - The new API does not handle subtitles yet.
+ *
+ * Mixing new and old function calls on the same AVCodecContext is not allowed,
+ * and will result in arbitrary behavior.
+ *
+ * Some codecs might require using the new API; using the old API will return
+ * an error when calling it.
+ * @}
*/
/**
AV_CODEC_ID_HQX,
AV_CODEC_ID_TDSC,
AV_CODEC_ID_HQ_HQA,
+ AV_CODEC_ID_HAP,
+ AV_CODEC_ID_DDS,
+ AV_CODEC_ID_DXV,
+ AV_CODEC_ID_SCREENPRESSO,
+ AV_CODEC_ID_RSCC,
/* various PCM "codecs" */
AV_CODEC_ID_FIRST_AUDIO = 0x10000, ///< A dummy id pointing at the start of audio codecs
AV_CODEC_ID_PCM_S8_PLANAR,
AV_CODEC_ID_PCM_S24LE_PLANAR,
AV_CODEC_ID_PCM_S32LE_PLANAR,
+ AV_CODEC_ID_PCM_S16BE_PLANAR,
/* various ADPCM codecs */
AV_CODEC_ID_ADPCM_IMA_QT = 0x11000,
AV_CODEC_ID_MPEG4SYSTEMS = 0x20001, /**< _FAKE_ codec to indicate a MPEG-4 Systems
* stream (only used by libavformat) */
AV_CODEC_ID_FFMETADATA = 0x21000, ///< Dummy codec for streams containing only metadata information.
+ AV_CODEC_ID_WRAPPED_AVFRAME = 0x21001, ///< Passthrough codec, AVFrames wrapped in AVPacket
};
/**
* Codec properties, a combination of AV_CODEC_PROP_* flags.
*/
int props;
+ /**
+ * If non-NULL, an array of profiles recognized for this codec.
+ * Terminated with FF_PROFILE_UNKNOWN.
+ */
+ const struct AVProfile *profiles;
} AVCodecDescriptor;
/**
* Note: If the first 23 bits of the additional bytes are not 0, then damaged
* MPEG bitstreams could cause overread and segfault.
*/
-#define FF_INPUT_BUFFER_PADDING_SIZE 8
+#define AV_INPUT_BUFFER_PADDING_SIZE 8
/**
* @ingroup lavc_encoding
* minimum encoding buffer size
* Used to avoid some checks during header writing.
*/
-#define FF_MIN_BUFFER_SIZE 16384
+#define AV_INPUT_BUFFER_MIN_SIZE 16384
+
+#if FF_API_WITHOUT_PREFIX
+/**
+ * @deprecated use AV_INPUT_BUFFER_PADDING_SIZE instead
+ */
+#define FF_INPUT_BUFFER_PADDING_SIZE 8
+/**
+ * @deprecated use AV_INPUT_BUFFER_MIN_SIZE instead
+ */
+#define FF_MIN_BUFFER_SIZE 16384
+#endif /* FF_API_WITHOUT_PREFIX */
/**
* @ingroup lavc_encoding
* motion estimation type.
+ * @deprecated use codec private option instead
*/
+#if FF_API_MOTION_EST
enum Motion_Est_ID {
ME_ZERO = 1, ///< no search, that is use 0,0 vector whenever one is needed
ME_FULL,
ME_UMH, ///< uneven multi-hexagon search
ME_TESA, ///< transformed exhaustive search algorithm
};
+#endif
/**
* @ingroup lavc_decoding
Note: Not everything is supported yet.
*/
+/**
+ * Allow decoders to produce frames with data planes that are not aligned
+ * to CPU requirements (e.g. due to cropping).
+ */
+#define AV_CODEC_FLAG_UNALIGNED (1 << 0)
+/**
+ * Use fixed qscale.
+ */
+#define AV_CODEC_FLAG_QSCALE (1 << 1)
+/**
+ * 4 MV per MB allowed / advanced prediction for H.263.
+ */
+#define AV_CODEC_FLAG_4MV (1 << 2)
+/**
+ * Output even those frames that might be corrupted.
+ */
+#define AV_CODEC_FLAG_OUTPUT_CORRUPT (1 << 3)
+/**
+ * Use qpel MC.
+ */
+#define AV_CODEC_FLAG_QPEL (1 << 4)
+/**
+ * Use internal 2pass ratecontrol in first pass mode.
+ */
+#define AV_CODEC_FLAG_PASS1 (1 << 9)
+/**
+ * Use internal 2pass ratecontrol in second pass mode.
+ */
+#define AV_CODEC_FLAG_PASS2 (1 << 10)
+/**
+ * loop filter.
+ */
+#define AV_CODEC_FLAG_LOOP_FILTER (1 << 11)
+/**
+ * Only decode/encode grayscale.
+ */
+#define AV_CODEC_FLAG_GRAY (1 << 13)
+/**
+ * error[?] variables will be set during encoding.
+ */
+#define AV_CODEC_FLAG_PSNR (1 << 15)
+/**
+ * Input bitstream might be truncated at a random location
+ * instead of only at frame boundaries.
+ */
+#define AV_CODEC_FLAG_TRUNCATED (1 << 16)
+/**
+ * Use interlaced DCT.
+ */
+#define AV_CODEC_FLAG_INTERLACED_DCT (1 << 18)
+/**
+ * Force low delay.
+ */
+#define AV_CODEC_FLAG_LOW_DELAY (1 << 19)
+/**
+ * Place global headers in extradata instead of every keyframe.
+ */
+#define AV_CODEC_FLAG_GLOBAL_HEADER (1 << 22)
+/**
+ * Use only bitexact stuff (except (I)DCT).
+ */
+#define AV_CODEC_FLAG_BITEXACT (1 << 23)
+/* Fx : Flag for H.263+ extra options */
+/**
+ * H.263 advanced intra coding / MPEG-4 AC prediction
+ */
+#define AV_CODEC_FLAG_AC_PRED (1 << 24)
+/**
+ * interlaced motion estimation
+ */
+#define AV_CODEC_FLAG_INTERLACED_ME (1 << 29)
+#define AV_CODEC_FLAG_CLOSED_GOP (1 << 31)
+
+/**
+ * Allow non spec compliant speedup tricks.
+ */
+#define AV_CODEC_FLAG2_FAST (1 << 0)
+/**
+ * Skip bitstream encoding.
+ */
+#define AV_CODEC_FLAG2_NO_OUTPUT (1 << 2)
+/**
+ * Place global headers at every keyframe instead of in extradata.
+ */
+#define AV_CODEC_FLAG2_LOCAL_HEADER (1 << 3)
+/**
+ * Input bitstream might be truncated at a packet boundaries
+ * instead of only at frame boundaries.
+ */
+#define AV_CODEC_FLAG2_CHUNKS (1 << 15)
+/**
+ * Discard cropping information from SPS.
+ */
+#define AV_CODEC_FLAG2_IGNORE_CROP (1 << 16)
+
+/* Unsupported options :
+ * Syntax Arithmetic coding (SAC)
+ * Reference Picture Selection
+ * Independent Segment Decoding */
+/* /Fx */
+/* codec capabilities */
+
+/**
+ * Decoder can use draw_horiz_band callback.
+ */
+#define AV_CODEC_CAP_DRAW_HORIZ_BAND (1 << 0)
+/**
+ * Codec uses get_buffer() for allocating buffers and supports custom allocators.
+ * If not set, it might not use get_buffer() at all or use operations that
+ * assume the buffer was allocated by avcodec_default_get_buffer.
+ */
+#define AV_CODEC_CAP_DR1 (1 << 1)
+#define AV_CODEC_CAP_TRUNCATED (1 << 3)
+/**
+ * Encoder or decoder requires flushing with NULL input at the end in order to
+ * give the complete and correct output.
+ *
+ * NOTE: If this flag is not set, the codec is guaranteed to never be fed with
+ * with NULL data. The user can still send NULL data to the public encode
+ * or decode function, but libavcodec will not pass it along to the codec
+ * unless this flag is set.
+ *
+ * Decoders:
+ * The decoder has a non-zero delay and needs to be fed with avpkt->data=NULL,
+ * avpkt->size=0 at the end to get the delayed data until the decoder no longer
+ * returns frames.
+ *
+ * Encoders:
+ * The encoder needs to be fed with NULL data at the end of encoding until the
+ * encoder no longer returns data.
+ *
+ * NOTE: For encoders implementing the AVCodec.encode2() function, setting this
+ * flag also means that the encoder must set the pts and duration for
+ * each output packet. If this flag is not set, the pts and duration will
+ * be determined by libavcodec from the input frame.
+ */
+#define AV_CODEC_CAP_DELAY (1 << 5)
+/**
+ * Codec can be fed a final frame with a smaller size.
+ * This can be used to prevent truncation of the last audio samples.
+ */
+#define AV_CODEC_CAP_SMALL_LAST_FRAME (1 << 6)
+/**
+ * Codec can output multiple frames per AVPacket
+ * Normally demuxers return one frame at a time, demuxers which do not do
+ * are connected to a parser to split what they return into proper frames.
+ * This flag is reserved to the very rare category of codecs which have a
+ * bitstream that cannot be split into frames without timeconsuming
+ * operations like full decoding. Demuxers carrying such bitstreams thus
+ * may return multiple frames in a packet. This has many disadvantages like
+ * prohibiting stream copy in many cases thus it should only be considered
+ * as a last resort.
+ */
+#define AV_CODEC_CAP_SUBFRAMES (1 << 8)
+/**
+ * Codec is experimental and is thus avoided in favor of non experimental
+ * encoders
+ */
+#define AV_CODEC_CAP_EXPERIMENTAL (1 << 9)
+/**
+ * Codec should fill in channel configuration and samplerate instead of container
+ */
+#define AV_CODEC_CAP_CHANNEL_CONF (1 << 10)
+/**
+ * Codec supports frame-level multithreading.
+ */
+#define AV_CODEC_CAP_FRAME_THREADS (1 << 12)
+/**
+ * Codec supports slice-based (or partition-based) multithreading.
+ */
+#define AV_CODEC_CAP_SLICE_THREADS (1 << 13)
+/**
+ * Codec supports changed parameters at any point.
+ */
+#define AV_CODEC_CAP_PARAM_CHANGE (1 << 14)
+/**
+ * Codec supports avctx->thread_count == 0 (auto).
+ */
+#define AV_CODEC_CAP_AUTO_THREADS (1 << 15)
+/**
+ * Audio encoder supports receiving a different number of samples in each call.
+ */
+#define AV_CODEC_CAP_VARIABLE_FRAME_SIZE (1 << 16)
+
+#if FF_API_WITHOUT_PREFIX
/**
* Allow decoders to produce frames with data planes that are not aligned
* to CPU requirements (e.g. due to cropping).
#define CODEC_FLAG_LOW_DELAY 0x00080000 ///< Force low delay.
#define CODEC_FLAG_GLOBAL_HEADER 0x00400000 ///< Place global headers in extradata instead of every keyframe.
#define CODEC_FLAG_BITEXACT 0x00800000 ///< Use only bitexact stuff (except (I)DCT).
-/* Fx : Flag for h263+ extra options */
+/* Fx : Flag for H.263+ extra options */
#define CODEC_FLAG_AC_PRED 0x01000000 ///< H.263 advanced intra coding / MPEG-4 AC prediction
#define CODEC_FLAG_LOOP_FILTER 0x00000800 ///< loop filter
#define CODEC_FLAG_INTERLACED_ME 0x20000000 ///< interlaced motion estimation
* are connected to a parser to split what they return into proper frames.
* This flag is reserved to the very rare category of codecs which have a
* bitstream that cannot be split into frames without timeconsuming
- * operations like full decoding. Demuxers carring such bitstreams thus
+ * operations like full decoding. Demuxers carrying such bitstreams thus
* may return multiple frames in a packet. This has many disadvantages like
* prohibiting stream copy in many cases thus it should only be considered
* as a last resort.
* Audio encoder supports receiving a different number of samples in each call.
*/
#define CODEC_CAP_VARIABLE_FRAME_SIZE 0x10000
+#endif /* FF_API_WITHOUT_PREFIX */
#if FF_API_MB_TYPE
//The following defines may change, don't expect compatibility if you use them.
#define MB_TYPE_L0L1 (MB_TYPE_L0 | MB_TYPE_L1)
#define MB_TYPE_QUANT 0x00010000
#define MB_TYPE_CBP 0x00020000
-//Note bits 24-31 are reserved for codec specific use (h264 ref0, mpeg1 0mv, ...)
+// Note bits 24-31 are reserved for codec specific use (H.264 ref0, MPEG-1 0mv, ...)
#endif
/**
int16_t position[3][2];
}AVPanScan;
+/**
+ * This structure describes the bitrate properties of an encoded bitstream. It
+ * roughly corresponds to a subset the VBV parameters for MPEG-2 or HRD
+ * parameters for H.264/HEVC.
+ */
+typedef struct AVCPBProperties {
+ /**
+ * Maximum bitrate of the stream, in bits per second.
+ * Zero if unknown or unspecified.
+ */
+ int max_bitrate;
+ /**
+ * Minimum bitrate of the stream, in bits per second.
+ * Zero if unknown or unspecified.
+ */
+ int min_bitrate;
+ /**
+ * Average bitrate of the stream, in bits per second.
+ * Zero if unknown or unspecified.
+ */
+ int avg_bitrate;
+
+ /**
+ * The size of the buffer to which the ratecontrol is applied, in bits.
+ * Zero if unknown or unspecified.
+ */
+ int buffer_size;
+
+ /**
+ * The delay between the time the packet this structure is associated with
+ * is received and the time when it should be decoded, in periods of a 27MHz
+ * clock.
+ *
+ * UINT64_MAX when unknown or unspecified.
+ */
+ uint64_t vbv_delay;
+} AVCPBProperties;
+
#if FF_API_QSCALE_TYPE
#define FF_QSCALE_TYPE_MPEG1 0
#define FF_QSCALE_TYPE_MPEG2 1
#define FF_QSCALE_TYPE_VP56 3
#endif
-#if FF_API_GET_BUFFER
-#define FF_BUFFER_TYPE_INTERNAL 1
-#define FF_BUFFER_TYPE_USER 2 ///< direct rendering buffers (image is (de)allocated by user)
-#define FF_BUFFER_TYPE_SHARED 4 ///< Buffer from somewhere else; don't deallocate image (data/base), all other tables are not shared.
-#define FF_BUFFER_TYPE_COPY 8 ///< Just a (modified) copy of some other buffer, don't deallocate anything.
-
-#define FF_BUFFER_HINTS_VALID 0x01 // Buffer hints value is meaningful (if 0 ignore).
-#define FF_BUFFER_HINTS_READABLE 0x02 // Codec will read from buffer.
-#define FF_BUFFER_HINTS_PRESERVE 0x04 // User must not alter buffer content.
-#define FF_BUFFER_HINTS_REUSABLE 0x08 // Codec will reuse the buffer (update).
-#endif
-
/**
* The decoder will keep a reference to the frame and may reuse it later.
*/
* to enum AVAudioServiceType.
*/
AV_PKT_DATA_AUDIO_SERVICE_TYPE,
+
+ /**
+ * This side data contains an integer value representing the quality
+ * factor of the compressed frame. Allowed range is between 1 (good)
+ * and FF_LAMBDA_MAX (bad).
+ */
+ AV_PKT_DATA_QUALITY_FACTOR,
+
+ /**
+ * This side data contains an integer value representing the stream index
+ * of a "fallback" track. A fallback track indicates an alternate
+ * track to use when the current track can not be decoded for some reason.
+ * e.g. no decoder available for codec.
+ */
+ AV_PKT_DATA_FALLBACK_TRACK,
+
+ /**
+ * This side data corresponds to the AVCPBProperties struct.
+ */
+ AV_PKT_DATA_CPB_PROPERTIES,
};
typedef struct AVPacketSideData {
* then passed to muxers.
*
* For video, it should typically contain one compressed frame. For audio it may
- * contain several compressed frames.
+ * contain several compressed frames. Encoders are allowed to output empty
+ * packets, with no compressed data, containing only side data
+ * (e.g. to update some stream parameters at the end of encoding).
*
* AVPacket is one of the few structs in Libav, whose size is a part of public
* ABI. Thus it may be allocated on stack and no new fields can be added to it
* without libavcodec and libavformat major bump.
*
- * The semantics of data ownership depends on the buf or destruct (deprecated)
- * fields. If either is set, the packet data is dynamically allocated and is
- * valid indefinitely until av_free_packet() is called (which in turn calls
- * av_buffer_unref()/the destruct callback to free the data). If neither is set,
- * the packet data is typically backed by some static buffer somewhere and is
- * only valid for a limited time (e.g. until the next read call when demuxing).
+ * The semantics of data ownership depends on the buf field.
+ * If it is set, the packet data is dynamically allocated and is
+ * valid indefinitely until a call to av_packet_unref() reduces the
+ * reference count to 0.
+ *
+ * If the buf field is not set av_packet_ref() would make a copy instead
+ * of increasing the reference count.
*
- * The side data is always allocated with av_malloc() and is freed in
- * av_free_packet().
+ * The side data is always allocated with av_malloc(), copied by
+ * av_packet_ref() and freed by av_packet_unref().
+ *
+ * @see av_packet_ref
+ * @see av_packet_unref
*/
typedef struct AVPacket {
/**
* Duration of this packet in AVStream->time_base units, 0 if unknown.
* Equals next_pts - this_pts in presentation order.
*/
- int duration;
-#if FF_API_DESTRUCT_PACKET
- attribute_deprecated
- void (*destruct)(struct AVPacket *);
- attribute_deprecated
- void *priv;
-#endif
+ int64_t duration;
+
int64_t pos; ///< byte position in stream, -1 if unknown
+#if FF_API_CONVERGENCE_DURATION
/**
- * Time difference in AVStream->time_base units from the pts of this
- * packet to the point at which the output from the decoder has converged
- * independent from the availability of previous frames. That is, the
- * frames are virtually identical no matter if decoding started from
- * the very first frame or from this keyframe.
- * Is AV_NOPTS_VALUE if unknown.
- * This field is not the display duration of the current packet.
- * This field has no meaning if the packet does not have AV_PKT_FLAG_KEY
- * set.
- *
- * The purpose of this field is to allow seeking in streams that have no
- * keyframes in the conventional sense. It corresponds to the
- * recovery point SEI in H.264 and match_time_delta in NUT. It is also
- * essential for some types of subtitle streams to ensure that all
- * subtitles are correctly displayed after seeking.
+ * @deprecated Same as the duration field, but as int64_t. This was required
+ * for Matroska subtitles, whose duration values could overflow when the
+ * duration field was still an int.
*/
+ attribute_deprecated
int64_t convergence_duration;
+#endif
} AVPacket;
#define AV_PKT_FLAG_KEY 0x0001 ///< The packet contains a keyframe
#define AV_PKT_FLAG_CORRUPT 0x0002 ///< The packet content is corrupted
#define FF_COMPRESSION_DEFAULT -1
/**
- * CODEC_FLAG_*.
+ * AV_CODEC_FLAG_*.
* - encoding: Set by user.
* - decoding: Set by user.
*/
int flags;
/**
- * CODEC_FLAG2_*
+ * AV_CODEC_FLAG2_*
* - encoding: Set by user.
* - decoding: Set by user.
*/
/**
* some codecs need / can use extradata like Huffman tables.
- * mjpeg: Huffman tables
+ * MJPEG: Huffman tables
* rv10: additional flags
- * mpeg4: global headers (they can be in the bitstream or here)
- * The allocated memory should be FF_INPUT_BUFFER_PADDING_SIZE bytes larger
- * than extradata_size to avoid prolems if it is read with the bitstream reader.
+ * MPEG-4: global headers (they can be in the bitstream or here)
+ * The allocated memory should be AV_INPUT_BUFFER_PADDING_SIZE bytes larger
+ * than extradata_size to avoid problems if it is read with the bitstream reader.
* The bytewise contents of extradata must not depend on the architecture or CPU endianness.
* - encoding: Set/allocated/freed by libavcodec.
* - decoding: Set/allocated/freed by user.
/* video only */
/**
* picture width / height.
+ *
+ * @note Those fields may not match the values of the last
+ * AVFrame output by avcodec_decode_video2 due frame
+ * reordering.
+ *
* - encoding: MUST be set by user.
* - decoding: May be set by the user before opening the decoder if known e.g.
* from the container. Some decoders will require the dimensions
* to be set by the caller. During decoding, the decoder may
- * overwrite those values as required.
+ * overwrite those values as required while parsing the data.
*/
int width, height;
/**
* Bitstream width / height, may be different from width/height e.g. when
* the decoded frame is cropped before being output.
+ *
+ * @note Those field may not match the value of the last
+ * AVFrame output by avcodec_receive_frame() due frame
+ * reordering.
+ *
* - encoding: unused
* - decoding: May be set by the user before opening the decoder if known
* e.g. from the container. During decoding, the decoder may
- * overwrite those values as required.
+ * overwrite those values as required while parsing the data.
*/
int coded_width, coded_height;
/**
* Pixel format, see AV_PIX_FMT_xxx.
* May be set by the demuxer if known from headers.
- * May be overriden by the decoder if it knows better.
+ * May be overridden by the decoder if it knows better.
+ *
+ * @note This field may not match the value of the last
+ * AVFrame output by avcodec_receive_frame() due frame
+ * reordering.
+ *
* - encoding: Set by user.
- * - decoding: Set by user if known, overridden by libavcodec if known
+ * - decoding: Set by user if known, overridden by libavcodec while
+ * parsing the data.
*/
enum AVPixelFormat pix_fmt;
+#if FF_API_MOTION_EST
/**
- * Motion estimation algorithm used for video coding.
- * 1 (zero), 2 (full), 3 (log), 4 (phods), 5 (epzs), 6 (x1), 7 (hex),
- * 8 (umh), 10 (tesa) [7, 8, 10 are x264 specific]
- * - encoding: MUST be set by user.
- * - decoding: unused
+ * This option does nothing
+ * @deprecated use codec private options instead
*/
- int me_method;
+ attribute_deprecated int me_method;
+#endif
/**
* If non NULL, 'draw_horiz_band' is called by the libavcodec
*/
float b_quant_factor;
- /** obsolete FIXME remove */
- int rc_strategy;
+#if FF_API_RC_STRATEGY
+ /** @deprecated use codec private option instead */
+ attribute_deprecated int rc_strategy;
#define FF_RC_STRATEGY_XVID 1
+#endif
+#if FF_API_PRIVATE_OPT
+ /** @deprecated use encoder private options instead */
+ attribute_deprecated
int b_frame_strategy;
+#endif
/**
* qscale offset between IP and B-frames
*/
int has_b_frames;
- /**
- * 0-> h263 quant 1-> mpeg quant
- * - encoding: Set by user.
- * - decoding: unused
- */
+#if FF_API_PRIVATE_OPT
+ /** @deprecated use encoder private options instead */
+ attribute_deprecated
int mpeg_quant;
+#endif
/**
- * qscale factor between P and I-frames
- * If > 0 then the last p frame quantizer will be used (q= lastp_q*factor+offset).
+ * qscale factor between P- and I-frames
+ * If > 0 then the last P-frame quantizer will be used (q = lastp_q * factor + offset).
* If < 0 then normal ratecontrol will be done (q= -normal_q*factor+offset).
* - encoding: Set by user.
* - decoding: unused
* - decoding: Set by user (or 0).
*/
int slice_count;
- /**
- * prediction method (needed for huffyuv)
- * - encoding: Set by user.
- * - decoding: unused
- */
+
+#if FF_API_PRIVATE_OPT
+ /** @deprecated use encoder private options instead */
+ attribute_deprecated
int prediction_method;
#define FF_PRED_LEFT 0
#define FF_PRED_PLANE 1
#define FF_PRED_MEDIAN 2
+#endif
/**
* slice offsets in the frame in bytes
*/
int last_predictor_count;
- /**
- * prepass for motion estimation
- * - encoding: Set by user.
- * - decoding: unused
- */
+#if FF_API_PRIVATE_OPT
+ /** @deprecated use encoder private options instead */
+ attribute_deprecated
int pre_me;
+#endif
/**
* motion estimation prepass comparison function
*/
int me_range;
+#if FF_API_QUANT_BIAS
/**
- * intra quantizer bias
- * - encoding: Set by user.
- * - decoding: unused
+ * @deprecated use encoder private option instead
*/
- int intra_quant_bias;
+ attribute_deprecated int intra_quant_bias;
#define FF_DEFAULT_QUANT_BIAS 999999
/**
- * inter quantizer bias
- * - encoding: Set by user.
- * - decoding: unused
+ * @deprecated use encoder private option instead
*/
- int inter_quant_bias;
+ attribute_deprecated int inter_quant_bias;
+#endif
/**
* slice flags
*/
int slice_flags;
#define SLICE_FLAG_CODED_ORDER 0x0001 ///< draw_horiz_band() is called in coded order instead of display
-#define SLICE_FLAG_ALLOW_FIELD 0x0002 ///< allow draw_horiz_band() with field slices (MPEG2 field pics)
+#define SLICE_FLAG_ALLOW_FIELD 0x0002 ///< allow draw_horiz_band() with field slices (MPEG-2 field pics)
#define SLICE_FLAG_ALLOW_PLANE 0x0004 ///< allow draw_horiz_band() with 1 component at a time (SVQ1)
#if FF_API_XVMC
*/
uint16_t *inter_matrix;
- /**
- * scene change detection threshold
- * 0 is default, larger means fewer detected scene changes.
- * - encoding: Set by user.
- * - decoding: unused
- */
+#if FF_API_PRIVATE_OPT
+ /** @deprecated use encoder private options instead */
+ attribute_deprecated
int scenechange_threshold;
- /**
- * noise reduction strength
- * - encoding: Set by user.
- * - decoding: unused
- */
+ /** @deprecated use encoder private options instead */
+ attribute_deprecated
int noise_reduction;
+#endif
#if FF_API_MPV_OPT
/**
#endif
/**
- * minimum MB lagrange multipler
+ * minimum MB Lagrange multiplier
* - encoding: Set by user.
* - decoding: unused
*/
int mb_lmin;
/**
- * maximum MB lagrange multipler
+ * maximum MB Lagrange multiplier
* - encoding: Set by user.
* - decoding: unused
*/
int mb_lmax;
+#if FF_API_PRIVATE_OPT
/**
- *
- * - encoding: Set by user.
- * - decoding: unused
+ * @deprecated use encoder private options instead
*/
+ attribute_deprecated
int me_penalty_compensation;
+#endif
/**
- *
* - encoding: Set by user.
* - decoding: unused
*/
int bidir_refine;
- /**
- *
- * - encoding: Set by user.
- * - decoding: unused
- */
+#if FF_API_PRIVATE_OPT
+ /** @deprecated use encoder private options instead */
+ attribute_deprecated
int brd_scale;
+#endif
/**
* minimum GOP size
*/
int refs;
- /**
- * chroma qp offset from luma
- * - encoding: Set by user.
- * - decoding: unused
- */
+#if FF_API_PRIVATE_OPT
+ /** @deprecated use encoder private options instead */
+ attribute_deprecated
int chromaoffset;
+#endif
#if FF_API_UNUSED_MEMBERS
/**
#endif
/**
- *
* Note: Value depends upon the compare function used for fullpel ME.
* - encoding: Set by user.
* - decoding: unused
*/
int mv0_threshold;
- /**
- * Adjust sensitivity of b_frame_strategy 1.
- * - encoding: Set by user.
- * - decoding: unused
- */
+#if FF_API_PRIVATE_OPT
+ /** @deprecated use encoder private options instead */
+ attribute_deprecated
int b_sensitivity;
+#endif
/**
* Chromaticity coordinates of the source primaries.
*
* - encoding: set by libavcodec in avcodec_open2(). Each submitted frame
* except the last must contain exactly frame_size samples per channel.
- * May be 0 when the codec has CODEC_CAP_VARIABLE_FRAME_SIZE set, then the
+ * May be 0 when the codec has AV_CODEC_CAP_VARIABLE_FRAME_SIZE set, then the
* frame size is not restricted.
* - decoding: may be set by some decoders to indicate constant frame size
*/
*/
int cutoff;
-#if FF_API_REQUEST_CHANNELS
- /**
- * Decoder should decode to this many channels if it can (0 for default)
- * - encoding: unused
- * - decoding: Set by user.
- * @deprecated Deprecated in favor of request_channel_layout.
- */
- attribute_deprecated int request_channels;
-#endif
-
/**
* Audio channel layout.
* - encoding: set by user.
*/
enum AVSampleFormat request_sample_fmt;
-#if FF_API_GET_BUFFER
- /**
- * Called at the beginning of each frame to get a buffer for it.
- *
- * The function will set AVFrame.data[], AVFrame.linesize[].
- * AVFrame.extended_data[] must also be set, but it should be the same as
- * AVFrame.data[] except for planar audio with more channels than can fit
- * in AVFrame.data[]. In that case, AVFrame.data[] shall still contain as
- * many data pointers as it can hold.
- *
- * if CODEC_CAP_DR1 is not set then get_buffer() must call
- * avcodec_default_get_buffer() instead of providing buffers allocated by
- * some other means.
- *
- * AVFrame.data[] should be 32- or 16-byte-aligned unless the CPU doesn't
- * need it. avcodec_default_get_buffer() aligns the output buffer properly,
- * but if get_buffer() is overridden then alignment considerations should
- * be taken into account.
- *
- * @see avcodec_default_get_buffer()
- *
- * Video:
- *
- * If pic.reference is set then the frame will be read later by libavcodec.
- * avcodec_align_dimensions2() should be used to find the required width and
- * height, as they normally need to be rounded up to the next multiple of 16.
- *
- * If frame multithreading is used and thread_safe_callbacks is set,
- * it may be called from a different thread, but not from more than one at
- * once. Does not need to be reentrant.
- *
- * @see release_buffer(), reget_buffer()
- * @see avcodec_align_dimensions2()
- *
- * Audio:
- *
- * Decoders request a buffer of a particular size by setting
- * AVFrame.nb_samples prior to calling get_buffer(). The decoder may,
- * however, utilize only part of the buffer by setting AVFrame.nb_samples
- * to a smaller value in the output frame.
- *
- * Decoders cannot use the buffer after returning from
- * avcodec_decode_audio4(), so they will not call release_buffer(), as it
- * is assumed to be released immediately upon return. In some rare cases,
- * a decoder may need to call get_buffer() more than once in a single
- * call to avcodec_decode_audio4(). In that case, when get_buffer() is
- * called again after it has already been called once, the previously
- * acquired buffer is assumed to be released at that time and may not be
- * reused by the decoder.
- *
- * As a convenience, av_samples_get_buffer_size() and
- * av_samples_fill_arrays() in libavutil may be used by custom get_buffer()
- * functions to find the required data size and to fill data pointers and
- * linesize. In AVFrame.linesize, only linesize[0] may be set for audio
- * since all planes must be the same size.
- *
- * @see av_samples_get_buffer_size(), av_samples_fill_arrays()
- *
- * - encoding: unused
- * - decoding: Set by libavcodec, user can override.
- *
- * @deprecated use get_buffer2()
- */
- attribute_deprecated
- int (*get_buffer)(struct AVCodecContext *c, AVFrame *pic);
-
- /**
- * Called to release buffers which were allocated with get_buffer.
- * A released buffer can be reused in get_buffer().
- * pic.data[*] must be set to NULL.
- * May be called from a different thread if frame multithreading is used,
- * but not by more than one thread at once, so does not need to be reentrant.
- * - encoding: unused
- * - decoding: Set by libavcodec, user can override.
- *
- * @deprecated custom freeing callbacks should be set from get_buffer2()
- */
- attribute_deprecated
- void (*release_buffer)(struct AVCodecContext *c, AVFrame *pic);
-
- /**
- * Called at the beginning of a frame to get cr buffer for it.
- * Buffer type (size, hints) must be the same. libavcodec won't check it.
- * libavcodec will pass previous buffer in pic, function should return
- * same buffer or new buffer with old frame "painted" into it.
- * If pic.data[0] == NULL must behave like get_buffer().
- * if CODEC_CAP_DR1 is not set then reget_buffer() must call
- * avcodec_default_reget_buffer() instead of providing buffers allocated by
- * some other means.
- * - encoding: unused
- * - decoding: Set by libavcodec, user can override.
- */
- attribute_deprecated
- int (*reget_buffer)(struct AVCodecContext *c, AVFrame *pic);
-#endif
-
/**
* This callback is called at the beginning of each frame to get data
* buffer(s) for it. There may be one contiguous buffer for all the data or
* to all data planes. data[] must hold as many pointers as it can.
* extended_data must be allocated with av_malloc() and will be freed in
* av_frame_unref().
- * * otherwise exended_data must point to data
+ * * otherwise extended_data must point to data
* - buf[] must contain one or more pointers to AVBufferRef structures. Each of
* the frame's data and extended_data pointers must be contained in these. That
* is, one AVBufferRef for each allocated chunk of memory, not necessarily one
* buffers than buf[] can hold. extended_buf will be freed in
* av_frame_unref().
*
- * If CODEC_CAP_DR1 is not set then get_buffer2() must call
+ * If AV_CODEC_CAP_DR1 is not set then get_buffer2() must call
* avcodec_default_get_buffer2() instead of providing buffers allocated by
* some other means.
*
* Otherwise, the decoded frames must not be freed by the caller and are
* only valid until the next decode call.
*
+ * This is always automatically enabled if avcodec_receive_frame() is used.
+ *
* - encoding: unused
* - decoding: set by the caller before avcodec_open2().
*/
*/
int rc_initial_buffer_occupancy;
+#if FF_API_CODER_TYPE
#define FF_CODER_TYPE_VLC 0
#define FF_CODER_TYPE_AC 1
#define FF_CODER_TYPE_RAW 2
#define FF_CODER_TYPE_DEFLATE 4
#endif /* FF_API_UNUSED_MEMBERS */
/**
- * coder type
- * - encoding: Set by user.
- * - decoding: unused
+ * @deprecated use encoder private options instead
*/
+ attribute_deprecated
int coder_type;
+#endif /* FF_API_CODER_TYPE */
- /**
- * context model
- * - encoding: Set by user.
- * - decoding: unused
- */
+#if FF_API_PRIVATE_OPT
+ /** @deprecated use encoder private options instead */
+ attribute_deprecated
int context_model;
+#endif
#if FF_API_MPV_OPT
/**
int lmax;
#endif
- /**
- * frame skip threshold
- * - encoding: Set by user.
- * - decoding: unused
- */
+#if FF_API_PRIVATE_OPT
+ /** @deprecated use encoder private options instead */
+ attribute_deprecated
int frame_skip_threshold;
- /**
- * frame skip factor
- * - encoding: Set by user.
- * - decoding: unused
- */
+ /** @deprecated use encoder private options instead */
+ attribute_deprecated
int frame_skip_factor;
- /**
- * frame skip exponent
- * - encoding: Set by user.
- * - decoding: unused
- */
+ /** @deprecated use encoder private options instead */
+ attribute_deprecated
int frame_skip_exp;
- /**
- * frame skip comparison function
- * - encoding: Set by user.
- * - decoding: unused
- */
+ /** @deprecated use encoder private options instead */
+ attribute_deprecated
int frame_skip_cmp;
+#endif /* FF_API_PRIVATE_OPT */
/**
* trellis RD quantization
*/
int trellis;
- /**
- * - encoding: Set by user.
- * - decoding: unused
- */
+#if FF_API_PRIVATE_OPT
+ /** @deprecated use encoder private options instead */
+ attribute_deprecated
int min_prediction_order;
- /**
- * - encoding: Set by user.
- * - decoding: unused
- */
+ /** @deprecated use encoder private options instead */
+ attribute_deprecated
int max_prediction_order;
- /**
- * GOP timecode frame start number, in non drop frame format
- * - encoding: Set by user.
- * - decoding: unused
- */
+ /** @deprecated use encoder private options instead */
+ attribute_deprecated
int64_t timecode_frame_start;
+#endif
+#if FF_API_RTP_CALLBACK
+ /**
+ * @deprecated unused
+ */
/* The RTP callback: This function is called */
/* every time the encoder has a packet to send. */
/* It depends on the encoder if the data starts */
/* with a Start Code (it should). H.263 does. */
/* mb_nb contains the number of macroblocks */
/* encoded in the RTP payload. */
+ attribute_deprecated
void (*rtp_callback)(struct AVCodecContext *avctx, void *data, int size, int mb_nb);
+#endif
+#if FF_API_PRIVATE_OPT
+ /** @deprecated use encoder private options instead */
+ attribute_deprecated
int rtp_payload_size; /* The size of the RTP payload: the coder will */
/* do its best to deliver a chunk with size */
/* below rtp_payload_size, the chunk will start */
/* with a start code on some codecs like H.263. */
/* This doesn't take account of any particular */
/* headers inside the transmitted RTP payload. */
+#endif
+#if FF_API_STAT_BITS
/* statistics, used for 2-pass encoding */
+ attribute_deprecated
int mv_bits;
+ attribute_deprecated
int header_bits;
+ attribute_deprecated
int i_tex_bits;
+ attribute_deprecated
int p_tex_bits;
+ attribute_deprecated
int i_count;
+ attribute_deprecated
int p_count;
+ attribute_deprecated
int skip_count;
+ attribute_deprecated
int misc_bits;
- /**
- * number of bits used for the previously encoded frame
- * - encoding: Set by libavcodec.
- * - decoding: unused
- */
+ /** @deprecated this field is unused */
+ attribute_deprecated
int frame_bits;
+#endif
/**
* pass1 encoding statistics output buffer
#define FF_BUG_TRUNCATED 16384
/**
- * strictly follow the standard (MPEG4, ...).
+ * strictly follow the standard (MPEG-4, ...).
* - encoding: Set by user.
* - decoding: Set by user.
* Setting this to STRICT or higher means the encoder and decoder will
*/
attribute_deprecated
int debug_mv;
-#define FF_DEBUG_VIS_MV_P_FOR 0x00000001 //visualize forward predicted MVs of P frames
-#define FF_DEBUG_VIS_MV_B_FOR 0x00000002 //visualize forward predicted MVs of B frames
-#define FF_DEBUG_VIS_MV_B_BACK 0x00000004 //visualize backward predicted MVs of B frames
+#define FF_DEBUG_VIS_MV_P_FOR 0x00000001 // visualize forward predicted MVs of P-frames
+#define FF_DEBUG_VIS_MV_B_FOR 0x00000002 // visualize forward predicted MVs of B-frames
+#define FF_DEBUG_VIS_MV_B_BACK 0x00000004 // visualize backward predicted MVs of B-frames
#endif
/**
#define AV_EF_EXPLODE (1<<3)
/**
- * opaque 64bit number (generally a PTS) that will be reordered and
+ * opaque 64-bit number (generally a PTS) that will be reordered and
* output in AVFrame.reordered_opaque
* - encoding: unused
* - decoding: Set by user.
/**
* error
- * - encoding: Set by libavcodec if flags&CODEC_FLAG_PSNR.
+ * - encoding: Set by libavcodec if flags & AV_CODEC_FLAG_PSNR.
* - decoding: unused
*/
uint64_t error[AV_NUM_DATA_POINTERS];
int dct_algo;
#define FF_DCT_AUTO 0
#define FF_DCT_FASTINT 1
-#if FF_API_UNUSED_MEMBERS
#define FF_DCT_INT 2
-#endif /* FF_API_UNUSED_MEMBERS */
#define FF_DCT_MMX 3
#define FF_DCT_ALTIVEC 5
#define FF_DCT_FAAN 6
attribute_deprecated int lowres;
#endif
+#if FF_API_CODED_FRAME
/**
* the picture in the bitstream
* - encoding: Set by libavcodec.
* - decoding: unused
+ *
+ * @deprecated use the quality factor packet side data instead
*/
- AVFrame *coded_frame;
+ attribute_deprecated AVFrame *coded_frame;
+#endif
/**
* thread count
*/
int (*execute2)(struct AVCodecContext *c, int (*func)(struct AVCodecContext *c2, void *arg, int jobnr, int threadnr), void *arg2, int *ret, int count);
-#if FF_API_THREAD_OPAQUE
- /**
- * @deprecated this field should not be used from outside of lavc
- */
- attribute_deprecated
- void *thread_opaque;
-#endif
-
/**
- * noise vs. sse weight for the nsse comparsion function
+ * noise vs. sse weight for the nsse comparison function
* - encoding: Set by user.
* - decoding: unused
*/
#define FF_PROFILE_JPEG2000_DCINEMA_2K 3
#define FF_PROFILE_JPEG2000_DCINEMA_4K 4
+#define FF_PROFILE_VP9_0 0
+#define FF_PROFILE_VP9_1 1
+#define FF_PROFILE_VP9_2 2
+#define FF_PROFILE_VP9_3 3
#define FF_PROFILE_HEVC_MAIN 1
#define FF_PROFILE_HEVC_MAIN_10 2
#define FF_LEVEL_UNKNOWN -99
/**
- *
* - encoding: unused
* - decoding: Set by user.
*/
enum AVDiscard skip_loop_filter;
/**
- *
* - encoding: unused
* - decoding: Set by user.
*/
enum AVDiscard skip_idct;
/**
- *
* - encoding: unused
* - decoding: Set by user.
*/
int error_rate;
#endif
-#if FF_API_CODEC_PKT
- /**
- * @deprecated this field is not supposed to be accessed from outside lavc
- */
- attribute_deprecated
- AVPacket *pkt;
-#endif
-
+#if FF_API_VBV_DELAY
/**
* VBV delay coded in the last frame (in periods of a 27 MHz clock).
* Used for compliant TS muxing.
* - encoding: Set by libavcodec.
* - decoding: unused.
+ * @deprecated this value is now exported as a part of
+ * AV_PKT_DATA_CPB_PROPERTIES packet side data
*/
+ attribute_deprecated
uint64_t vbv_delay;
+#endif
+#if FF_API_SIDEDATA_ONLY_PKT
/**
- * Encoding only. Allow encoders to output packets that do not contain any
- * encoded data, only side data.
+ * Encoding only and set by default. Allow encoders to output packets
+ * that do not contain any encoded data, only side data.
*
* Some encoders need to output such packets, e.g. to update some stream
* parameters at the end of encoding.
*
- * All callers are strongly recommended to set this option to 1 and update
- * their code to deal with such packets, since this behaviour may become
- * always enabled in the future (then this option will be deprecated and
- * later removed). To avoid ABI issues when this happens, the callers should
- * use AVOptions to set this field.
+ * @deprecated this field disables the default behaviour and
+ * it is kept only for compatibility.
*/
+ attribute_deprecated
int side_data_only_packets;
+#endif
/**
* Audio only. The number of "priming" samples (padding) inserted by the
* - decoding: For codecs that store a framerate value in the compressed
* bitstream, the decoder may export it here. { 0, 1} when
* unknown.
- * - encoding: unused
+ * - encoding: May be used to signal the framerate of CFR content to an
+ * encoder.
*/
AVRational framerate;
* - decoding: Set by libavcodec before calling get_format()
*/
enum AVPixelFormat sw_pix_fmt;
+
+ /**
+ * Additional data associated with the entire coded stream.
+ *
+ * - decoding: unused
+ * - encoding: may be set by libavcodec after avcodec_open2().
+ */
+ AVPacketSideData *coded_side_data;
+ int nb_coded_side_data;
+
+ /**
+ * Encoding only.
+ *
+ * For hardware encoders configured to use a hwaccel pixel format, this
+ * field should be set by the caller to a reference to the AVHWFramesContext
+ * describing input frames. AVHWFramesContext.format must be equal to
+ * AVCodecContext.pix_fmt.
+ *
+ * This field should be set before avcodec_open2() is called and is
+ * afterwards owned and managed by libavcodec.
+ */
+ AVBufferRef *hw_frames_ctx;
} AVCodecContext;
/**
enum AVCodecID id;
/**
* Codec capabilities.
- * see CODEC_CAP_*
+ * see AV_CODEC_CAP_*
*/
int capabilities;
const AVRational *supported_framerates; ///< array of supported framerates, or NULL if any, array is terminated by {0,0}
int *got_packet_ptr);
int (*decode)(AVCodecContext *, void *outdata, int *outdata_size, AVPacket *avpkt);
int (*close)(AVCodecContext *);
+ /**
+ * Decode/encode API with decoupled packet/frame dataflow. The API is the
+ * same as the avcodec_ prefixed APIs (avcodec_send_frame() etc.), except
+ * that:
+ * - never called if the codec is closed or the wrong type,
+ * - AVPacket parameter change side data is applied right before calling
+ * AVCodec->send_packet,
+ * - if AV_CODEC_CAP_DELAY is not set, drain packets or frames are never sent,
+ * - only one drain packet is ever passed down (until the next flush()),
+ * - a drain AVPacket is always NULL (no need to check for avpkt->size).
+ */
+ int (*send_frame)(AVCodecContext *avctx, const AVFrame *frame);
+ int (*send_packet)(AVCodecContext *avctx, const AVPacket *avpkt);
+ int (*receive_frame)(AVCodecContext *avctx, AVFrame *frame);
+ int (*receive_packet)(AVCodecContext *avctx, AVPacket *avpkt);
/**
* Flush buffers.
* Will be called when seeking
* @}
*/
+#if FF_API_AVPICTURE
/**
* @defgroup lavc_picture AVPicture
*
/**
* four components are given, that's all.
* the last component is alpha
+ * @deprecated Use the imgutils functions
*/
typedef struct AVPicture {
+ attribute_deprecated
uint8_t *data[AV_NUM_DATA_POINTERS];
+ attribute_deprecated
int linesize[AV_NUM_DATA_POINTERS]; ///< number of bytes per line
} AVPicture;
/**
* @}
*/
+#endif
#define AVPALETTE_SIZE 1024
#define AVPALETTE_COUNT 256
int h; ///< height of pict, undefined when pict is not set
int nb_colors; ///< number of colors in pict, undefined when pict is not set
+#if FF_API_AVPICTURE
/**
- * data+linesize for the bitmap of this subtitle.
- * can be set for text/ass as well once they where rendered
+ * @deprecated unused
*/
+ attribute_deprecated
AVPicture pict;
+#endif
+ /**
+ * data+linesize for the bitmap of this subtitle.
+ * Can be set for text/ass as well once they are rendered.
+ */
+ uint8_t *data[4];
+ int linesize[4];
+
enum AVSubtitleType type;
char *text; ///< 0 terminated plain UTF-8 text
/**
* 0 terminated ASS/SSA compatible event line.
- * The pressentation of this is unaffected by the other values in this
+ * The presentation of this is unaffected by the other values in this
* struct.
*/
char *ass;
int64_t pts; ///< Same as packet pts, in AV_TIME_BASE
} AVSubtitle;
+/**
+ * This struct describes the properties of an encoded stream.
+ *
+ * sizeof(AVCodecParameters) is not a part of the public ABI, this struct must
+ * be allocated with avcodec_parameters_alloc() and freed with
+ * avcodec_parameters_free().
+ */
+typedef struct AVCodecParameters {
+ /**
+ * General type of the encoded data.
+ */
+ enum AVMediaType codec_type;
+ /**
+ * Specific type of the encoded data (the codec used).
+ */
+ enum AVCodecID codec_id;
+ /**
+ * Additional information about the codec (corresponds to the AVI FOURCC).
+ */
+ uint32_t codec_tag;
+
+ /**
+ * Extra binary data needed for initializing the decoder, codec-dependent.
+ *
+ * Must be allocated with av_malloc() and will be freed by
+ * avcodec_parameters_free(). The allocated size of extradata must be at
+ * least extradata_size + AV_INPUT_BUFFER_PADDING_SIZE, with the padding
+ * bytes zeroed.
+ */
+ uint8_t *extradata;
+ /**
+ * Size of the extradata content in bytes.
+ */
+ int extradata_size;
+
+ /**
+ * - video: the pixel format, the value corresponds to enum AVPixelFormat.
+ * - audio: the sample format, the value corresponds to enum AVSampleFormat.
+ */
+ int format;
+
+ /**
+ * The average bitrate of the encoded data (in bits per second).
+ */
+ int bit_rate;
+
+ int bits_per_coded_sample;
+
+ /**
+ * Codec-specific bitstream restrictions that the stream conforms to.
+ */
+ int profile;
+ int level;
+
+ /**
+ * Video only. The dimensions of the video frame in pixels.
+ */
+ int width;
+ int height;
+
+ /**
+ * Video only. The aspect ratio (width / height) which a single pixel
+ * should have when displayed.
+ *
+ * When the aspect ratio is unknown / undefined, the numerator should be
+ * set to 0 (the denominator may have any value).
+ */
+ AVRational sample_aspect_ratio;
+
+ /**
+ * Video only. The order of the fields in interlaced video.
+ */
+ enum AVFieldOrder field_order;
+
+ /**
+ * Video only. Additional colorspace characteristics.
+ */
+ enum AVColorRange color_range;
+ enum AVColorPrimaries color_primaries;
+ enum AVColorTransferCharacteristic color_trc;
+ enum AVColorSpace color_space;
+ enum AVChromaLocation chroma_location;
+
+ /**
+ * Audio only. The channel layout bitmask. May be 0 if the channel layout is
+ * unknown or unspecified, otherwise the number of bits set must be equal to
+ * the channels field.
+ */
+ uint64_t channel_layout;
+ /**
+ * Audio only. The number of audio channels.
+ */
+ int channels;
+ /**
+ * Audio only. The number of audio samples per second.
+ */
+ int sample_rate;
+ /**
+ * Audio only. The number of bytes per coded audio frame, required by some
+ * formats.
+ *
+ * Corresponds to nBlockAlign in WAVEFORMATEX.
+ */
+ int block_align;
+
+ /**
+ * Audio only. The amount of padding (in samples) inserted by the encoder at
+ * the beginning of the audio. I.e. this number of leading decoded samples
+ * must be discarded by the caller to get the original audio without leading
+ * padding.
+ */
+ int initial_padding;
+ /**
+ * Audio only. The amount of padding (in samples) appended by the encoder to
+ * the end of the audio. I.e. this number of decoded samples must be
+ * discarded by the caller from the end of the stream to get the original
+ * audio without any trailing padding.
+ */
+ int trailing_padding;
+} AVCodecParameters;
+
/**
* If c is NULL, returns the first registered codec,
* if c is non-NULL, returns the next registered codec after c,
*/
int avcodec_copy_context(AVCodecContext *dest, const AVCodecContext *src);
-#if FF_API_AVFRAME_LAVC
/**
- * @deprecated use av_frame_alloc()
+ * Allocate a new AVCodecParameters and set its fields to default values
+ * (unknown/invalid/0). The returned struct must be freed with
+ * avcodec_parameters_free().
*/
-attribute_deprecated
-AVFrame *avcodec_alloc_frame(void);
+AVCodecParameters *avcodec_parameters_alloc(void);
/**
- * Set the fields of the given AVFrame to default values.
- *
- * @param frame The AVFrame of which the fields should be set to default values.
- *
- * @deprecated use av_frame_unref()
+ * Free an AVCodecParameters instance and everything associated with it and
+ * write NULL to the supplied pointer.
*/
-attribute_deprecated
-void avcodec_get_frame_defaults(AVFrame *frame);
+void avcodec_parameters_free(AVCodecParameters **par);
/**
- * Free the frame and any dynamically allocated objects in it,
- * e.g. extended_data.
+ * Copy the contents of src to dst. Any allocated fields in dst are freed and
+ * replaced with newly allocated duplicates of the corresponding fields in src.
*
- * @param frame frame to be freed. The pointer will be set to NULL.
+ * @return >= 0 on success, a negative AVERROR code on failure.
+ */
+int avcodec_parameters_copy(AVCodecParameters *dst, const AVCodecParameters *src);
+
+/**
+ * Fill the parameters struct based on the values from the supplied codec
+ * context. Any allocated fields in par are freed and replaced with duplicates
+ * of the corresponding fields in codec.
*
- * @warning this function does NOT free the data buffers themselves
- * (it does not know how, since they might have been allocated with
- * a custom get_buffer()).
+ * @return >= 0 on success, a negative AVERROR code on failure
+ */
+int avcodec_parameters_from_context(AVCodecParameters *par,
+ const AVCodecContext *codec);
+
+/**
+ * Fill the codec context based on the values from the supplied codec
+ * parameters. Any allocated fields in codec that have a corresponding field in
+ * par are freed and replaced with duplicates of the corresponding field in par.
+ * Fields in codec that do not have a counterpart in par are not touched.
*
- * @deprecated use av_frame_free()
+ * @return >= 0 on success, a negative AVERROR code on failure.
*/
-attribute_deprecated
-void avcodec_free_frame(AVFrame **frame);
-#endif
+int avcodec_parameters_to_context(AVCodecContext *codec,
+ const AVCodecParameters *par);
/**
* Initialize the AVCodecContext to use the given AVCodec. Prior to using this
* @warning This function is not thread safe!
*
* @note Always call this function before using decoding routines (such as
- * @ref avcodec_decode_video2()).
+ * @ref avcodec_receive_frame()).
*
* @code
* avcodec_register_all();
* @{
*/
-#if FF_API_DESTRUCT_PACKET
/**
- * Default packet destructor.
- * @deprecated use the AVBuffer API instead
+ * Allocate an AVPacket and set its fields to default values. The resulting
+ * struct must be freed using av_packet_free().
+ *
+ * @return An AVPacket filled with default values or NULL on failure.
+ *
+ * @note this only allocates the AVPacket itself, not the data buffers. Those
+ * must be allocated through other means such as av_new_packet.
+ *
+ * @see av_new_packet
*/
-attribute_deprecated
-void av_destruct_packet(AVPacket *pkt);
-#endif
+AVPacket *av_packet_alloc(void);
+
+/**
+ * Create a new packet that references the same data as src.
+ *
+ * This is a shortcut for av_packet_alloc()+av_packet_ref().
+ *
+ * @return newly created AVPacket on success, NULL on error.
+ *
+ * @see av_packet_alloc
+ * @see av_packet_ref
+ */
+AVPacket *av_packet_clone(AVPacket *src);
+
+/**
+ * Free the packet, if the packet is reference counted, it will be
+ * unreferenced first.
+ *
+ * @param packet packet to be freed. The pointer will be set to NULL.
+ * @note passing NULL is a no-op.
+ */
+void av_packet_free(AVPacket **pkt);
/**
* Initialize optional fields of a packet with default values.
* function returns successfully, the data is owned by the underlying AVBuffer.
* The caller may not access the data through other means.
* @param size size of data in bytes, without the padding. I.e. the full buffer
- * size is assumed to be size + FF_INPUT_BUFFER_PADDING_SIZE.
+ * size is assumed to be size + AV_INPUT_BUFFER_PADDING_SIZE.
*
* @return 0 on success, a negative AVERROR on error
*/
int av_packet_from_data(AVPacket *pkt, uint8_t *data, int size);
+#if FF_API_AVPACKET_OLD_API
/**
* @warning This is a hack - the packet memory allocation stuff is broken. The
* packet is allocated if it was not really allocated.
+ *
+ * @deprecated Use av_packet_ref
*/
+attribute_deprecated
int av_dup_packet(AVPacket *pkt);
-
/**
* Free a packet.
*
+ * @deprecated Use av_packet_unref
+ *
* @param pkt packet to free
*/
+attribute_deprecated
void av_free_packet(AVPacket *pkt);
-
+#endif
/**
* Allocate new information of a packet.
*
uint8_t* av_packet_new_side_data(AVPacket *pkt, enum AVPacketSideDataType type,
int size);
+/**
+ * Wrap an existing array as a packet side data.
+ *
+ * @param pkt packet
+ * @param type side information type
+ * @param data the side data array. It must be allocated with the av_malloc()
+ * family of functions. The ownership of the data is transferred to
+ * pkt.
+ * @param size side information size
+ * @return a non-negative number on success, a negative AVERROR code on
+ * failure. On failure, the packet is unchanged and the data remains
+ * owned by the caller.
+ */
+int av_packet_add_side_data(AVPacket *pkt, enum AVPacketSideDataType type,
+ uint8_t *data, size_t size);
+
/**
* Shrink the already allocated side data buffer
*
* @param src Source packet
*
* @return 0 on success AVERROR on failure.
- *
*/
int av_packet_copy_props(AVPacket *dst, const AVPacket *src);
*/
AVCodec *avcodec_find_decoder_by_name(const char *name);
-#if FF_API_GET_BUFFER
-attribute_deprecated int avcodec_default_get_buffer(AVCodecContext *s, AVFrame *pic);
-attribute_deprecated void avcodec_default_release_buffer(AVCodecContext *s, AVFrame *pic);
-attribute_deprecated int avcodec_default_reget_buffer(AVCodecContext *s, AVFrame *pic);
-#endif
-
/**
* The default callback for AVCodecContext.get_buffer2(). It is made public so
* it can be called by custom get_buffer2() implementations for decoders without
- * CODEC_CAP_DR1 set.
+ * AV_CODEC_CAP_DR1 set.
*/
int avcodec_default_get_buffer2(AVCodecContext *s, AVFrame *frame, int flags);
* buffer that is acceptable for the codec if you do not use any horizontal
* padding.
*
- * May only be used if a codec with CODEC_CAP_DR1 has been opened.
+ * May only be used if a codec with AV_CODEC_CAP_DR1 has been opened.
*/
void avcodec_align_dimensions(AVCodecContext *s, int *width, int *height);
* buffer that is acceptable for the codec if you also ensure that all
* line sizes are a multiple of the respective linesize_align[i].
*
- * May only be used if a codec with CODEC_CAP_DR1 has been opened.
+ * May only be used if a codec with AV_CODEC_CAP_DR1 has been opened.
*/
void avcodec_align_dimensions2(AVCodecContext *s, int *width, int *height,
int linesize_align[AV_NUM_DATA_POINTERS]);
* needs to be fed to the decoder with remaining data until it is completely
* consumed or an error occurs.
*
- * Some decoders (those marked with CODEC_CAP_DELAY) have a delay between input
+ * Some decoders (those marked with AV_CODEC_CAP_DELAY) have a delay between input
* and output. This means that for some packets they will not immediately
* produce decoded output and need to be flushed at the end of decoding to get
* all the decoded data. Flushing is done by calling this function with packets
* with avpkt->data set to NULL and avpkt->size set to 0 until it stops
* returning samples. It is safe to flush even those decoders that are not
- * marked with CODEC_CAP_DELAY, then no samples will be returned.
+ * marked with AV_CODEC_CAP_DELAY, then no samples will be returned.
*
- * @warning The input buffer, avpkt->data must be FF_INPUT_BUFFER_PADDING_SIZE
+ * @warning The input buffer, avpkt->data must be AV_INPUT_BUFFER_PADDING_SIZE
* larger than the actual read bytes because some optimized bitstream
* readers read 32 or 64 bits at once and could read over the end.
*
* @param[out] got_frame_ptr Zero if no frame could be decoded, otherwise it is
* non-zero. Note that this field being set to zero
* does not mean that an error has occurred. For
- * decoders with CODEC_CAP_DELAY set, no given decode
+ * decoders with AV_CODEC_CAP_DELAY set, no given decode
* call is guaranteed to produce a frame.
* @param[in] avpkt The input AVPacket containing the input buffer.
* At least avpkt->data and avpkt->size should be set. Some
* @return A negative error code is returned if an error occurred during
* decoding, otherwise the number of bytes consumed from the input
* AVPacket is returned.
+ *
+* @deprecated Use avcodec_send_packet() and avcodec_receive_frame().
*/
+attribute_deprecated
int avcodec_decode_audio4(AVCodecContext *avctx, AVFrame *frame,
int *got_frame_ptr, AVPacket *avpkt);
* Some decoders may support multiple frames in a single AVPacket, such
* decoders would then just decode the first frame.
*
- * @warning The input buffer must be FF_INPUT_BUFFER_PADDING_SIZE larger than
+ * @warning The input buffer must be AV_INPUT_BUFFER_PADDING_SIZE larger than
* the actual read bytes because some optimized bitstream readers read 32 or 64
* bits at once and could read over the end.
*
* @warning The end of the input buffer buf should be set to 0 to ensure that
* no overreading happens for damaged MPEG streams.
*
- * @note Codecs which have the CODEC_CAP_DELAY capability set have a delay
+ * @note Codecs which have the AV_CODEC_CAP_DELAY capability set have a delay
* between input and output, these need to be fed with avpkt->data=NULL,
* avpkt->size=0 at the end to return the remaining frames.
*
* next call to this function or until closing or flushing the
* decoder. The caller may not write to it.
*
- * @param[in] avpkt The input AVpacket containing the input buffer.
+ * @param[in] avpkt The input AVPacket containing the input buffer.
* You can create such packet with av_init_packet() and by then setting
* data and size, some decoders might in addition need other fields like
* flags&AV_PKT_FLAG_KEY. All decoders are designed to use the least
* @param[in,out] got_picture_ptr Zero if no frame could be decompressed, otherwise, it is nonzero.
* @return On error a negative value is returned, otherwise the number of bytes
* used or zero if no frame could be decompressed.
+ *
+ * @deprecated Use avcodec_send_packet() and avcodec_receive_frame().
*/
+attribute_deprecated
int avcodec_decode_video2(AVCodecContext *avctx, AVFrame *picture,
int *got_picture_ptr,
AVPacket *avpkt);
* Return a negative value on error, otherwise return the number of bytes used.
* If no subtitle could be decompressed, got_sub_ptr is zero.
* Otherwise, the subtitle is stored in *sub.
- * Note that CODEC_CAP_DR1 is not available for subtitle codecs. This is for
+ * Note that AV_CODEC_CAP_DR1 is not available for subtitle codecs. This is for
* simplicity, because the performance difference is expect to be negligible
* and reusing a get_buffer written for video codecs would probably perform badly
* due to a potentially very different allocation pattern.
int *got_sub_ptr,
AVPacket *avpkt);
+/**
+ * Supply raw packet data as input to a decoder.
+ *
+ * Internally, this call will copy relevant AVCodecContext fields, which can
+ * influence decoding per-packet, and apply them when the packet is actually
+ * decoded. (For example AVCodecContext.skip_frame, which might direct the
+ * decoder to drop the frame contained by the packet sent with this function.)
+ *
+ * @warning The input buffer, avpkt->data must be AV_INPUT_BUFFER_PADDING_SIZE
+ * larger than the actual read bytes because some optimized bitstream
+ * readers read 32 or 64 bits at once and could read over the end.
+ *
+ * @warning Do not mix this API with the legacy API (like avcodec_decode_video2())
+ * on the same AVCodecContext. It will return unexpected results now
+ * or in future libavcodec versions.
+ *
+ * @note The AVCodecContext MUST have been opened with @ref avcodec_open2()
+ * before packets may be fed to the decoder.
+ *
+ * @param avctx codec context
+ * @param[in] avpkt The input AVPacket. Usually, this will be a single video
+ * frame, or several complete audio frames.
+ * Ownership of the packet remains with the caller, and the
+ * decoder will not write to the packet. The decoder may create
+ * a reference to the packet data (or copy it if the packet is
+ * not reference-counted).
+ * Unlike with older APIs, the packet is always fully consumed,
+ * and if it contains multiple frames (e.g. some audio codecs),
+ * will require you to call avcodec_receive_frame() multiple
+ * times afterwards before you can send a new packet.
+ * It can be NULL (or an AVPacket with data set to NULL and
+ * size set to 0); in this case, it is considered a flush
+ * packet, which signals the end of the stream. Sending the
+ * first flush packet will return success. Subsequent ones are
+ * unnecessary and will return AVERROR_EOF. If the decoder
+ * still has frames buffered, it will return them after sending
+ * a flush packet.
+ *
+ * @return 0 on success, otherwise negative error code:
+ * AVERROR(EAGAIN): input is not accepted right now - the packet must be
+ * resent after trying to read output
+ * AVERROR_EOF: the decoder has been flushed, and no new packets can
+ * be sent to it (also returned if more than 1 flush
+ * packet is sent)
+ * AVERROR(EINVAL): codec not opened, it is an encoder, or requires flush
+ * AVERROR(ENOMEM): failed to add packet to internal queue, or similar
+ * other errors: legitimate decoding errors
+ */
+int avcodec_send_packet(AVCodecContext *avctx, const AVPacket *avpkt);
+
+/**
+ * Return decoded output data from a decoder.
+ *
+ * @param avctx codec context
+ * @param frame This will be set to a reference-counted video or audio
+ * frame (depending on the decoder type) allocated by the
+ * decoder. Note that the function will always call
+ * av_frame_unref(frame) before doing anything else.
+ *
+ * @return
+ * 0: success, a frame was returned
+ * AVERROR(EAGAIN): output is not available right now - user must try
+ * to send new input
+ * AVERROR_EOF: the decoder has been fully flushed, and there will be
+ * no more output frames
+ * AVERROR(EINVAL): codec not opened, or it is an encoder
+ * other negative values: legitimate decoding errors
+ */
+int avcodec_receive_frame(AVCodecContext *avctx, AVFrame *frame);
+
+/**
+ * Supply a raw video or audio frame to the encoder. Use avcodec_receive_packet()
+ * to retrieve buffered output packets.
+ *
+ * @param avctx codec context
+ * @param[in] frame AVFrame containing the raw audio or video frame to be encoded.
+ * Ownership of the frame remains with the caller, and the
+ * encoder will not write to the frame. The encoder may create
+ * a reference to the frame data (or copy it if the frame is
+ * not reference-counted).
+ * It can be NULL, in which case it is considered a flush
+ * packet. This signals the end of the stream. If the encoder
+ * still has packets buffered, it will return them after this
+ * call. Once flushing mode has been entered, additional flush
+ * packets are ignored, and sending frames will return
+ * AVERROR_EOF.
+ *
+ * For audio:
+ * If AV_CODEC_CAP_VARIABLE_FRAME_SIZE is set, then each frame
+ * can have any number of samples.
+ * If it is not set, frame->nb_samples must be equal to
+ * avctx->frame_size for all frames except the last.
+ * The final frame may be smaller than avctx->frame_size.
+ * @return 0 on success, otherwise negative error code:
+ * AVERROR(EAGAIN): input is not accepted right now - the frame must be
+ * resent after trying to read output packets
+ * AVERROR_EOF: the encoder has been flushed, and no new frames can
+ * be sent to it
+ * AVERROR(EINVAL): codec not opened, refcounted_frames not set, it is a
+ * decoder, or requires flush
+ * AVERROR(ENOMEM): failed to add packet to internal queue, or similar
+ * other errors: legitimate decoding errors
+ */
+int avcodec_send_frame(AVCodecContext *avctx, const AVFrame *frame);
+
+/**
+ * Read encoded data from the encoder.
+ *
+ * @param avctx codec context
+ * @param avpkt This will be set to a reference-counted packet allocated by the
+ * encoder. Note that the function will always call
+ * av_frame_unref(frame) before doing anything else.
+ * @return 0 on success, otherwise negative error code:
+ * AVERROR(EAGAIN): output is not available right now - user must try
+ * to send input
+ * AVERROR_EOF: the encoder has been fully flushed, and there will be
+ * no more output packets
+ * AVERROR(EINVAL): codec not opened, or it is an encoder
+ * other errors: legitimate decoding errors
+ */
+int avcodec_receive_packet(AVCodecContext *avctx, AVPacket *avpkt);
+
+
/**
* @defgroup lavc_parsing Frame parsing
* @{
*/
int key_frame;
+#if FF_API_CONVERGENCE_DURATION
/**
- * Time difference in stream time base units from the pts of this
- * packet to the point at which the output from the decoder has converged
- * independent from the availability of previous frames. That is, the
- * frames are virtually identical no matter if decoding started from
- * the very first frame or from this keyframe.
- * Is AV_NOPTS_VALUE if unknown.
- * This field is not the display duration of the current frame.
- * This field has no meaning if the packet does not have AV_PKT_FLAG_KEY
- * set.
- *
- * The purpose of this field is to allow seeking in streams that have no
- * keyframes in the conventional sense. It corresponds to the
- * recovery point SEI in H.264 and match_time_delta in NUT. It is also
- * essential for some types of subtitle streams to ensure that all
- * subtitles are correctly displayed after seeking.
+ * @deprecated unused
*/
+ attribute_deprecated
int64_t convergence_duration;
+#endif
// Timestamp generation support:
/**
* output packet.
*
* If this function fails or produces no output, avpkt will be
- * freed using av_free_packet() (i.e. avpkt->destruct will be
- * called to free the user supplied buffer).
+ * freed using av_packet_unref().
* @param[in] frame AVFrame containing the raw audio data to be encoded.
* May be NULL when flushing an encoder that has the
- * CODEC_CAP_DELAY capability set.
- * If CODEC_CAP_VARIABLE_FRAME_SIZE is set, then each frame
+ * AV_CODEC_CAP_DELAY capability set.
+ * If AV_CODEC_CAP_VARIABLE_FRAME_SIZE is set, then each frame
* can have any number of samples.
* If it is not set, frame->nb_samples must be equal to
* avctx->frame_size for all frames except the last.
* value of got_packet_ptr is undefined and should
* not be used.
* @return 0 on success, negative error code on failure
+ *
+ * @deprecated use avcodec_send_frame()/avcodec_receive_packet() instead
*/
+attribute_deprecated
int avcodec_encode_audio2(AVCodecContext *avctx, AVPacket *avpkt,
const AVFrame *frame, int *got_packet_ptr);
* caller, he is responsible for freeing it.
*
* If this function fails or produces no output, avpkt will be
- * freed using av_free_packet() (i.e. avpkt->destruct will be
- * called to free the user supplied buffer).
+ * freed using av_packet_unref().
* @param[in] frame AVFrame containing the raw video data to be encoded.
* May be NULL when flushing an encoder that has the
- * CODEC_CAP_DELAY capability set.
+ * AV_CODEC_CAP_DELAY capability set.
* @param[out] got_packet_ptr This field is set to 1 by libavcodec if the
* output packet is non-empty, and to 0 if it is
* empty. If the function returns an error, the
* value of got_packet_ptr is undefined and should
* not be used.
* @return 0 on success, negative error code on failure
+ *
+ * @deprecated use avcodec_send_frame()/avcodec_receive_packet() instead
*/
+attribute_deprecated
int avcodec_encode_video2(AVCodecContext *avctx, AVPacket *avpkt,
const AVFrame *frame, int *got_packet_ptr);
* @}
*/
+#if FF_API_AVPICTURE
/**
* @addtogroup lavc_picture
* @{
*/
/**
- * Allocate memory for a picture. Call avpicture_free() to free it.
- *
- * @see avpicture_fill()
- *
- * @param picture the picture to be filled in
- * @param pix_fmt the format of the picture
- * @param width the width of the picture
- * @param height the height of the picture
- * @return zero if successful, a negative value if not
+ * @deprecated unused
*/
+attribute_deprecated
int avpicture_alloc(AVPicture *picture, enum AVPixelFormat pix_fmt, int width, int height);
/**
- * Free a picture previously allocated by avpicture_alloc().
- * The data buffer used by the AVPicture is freed, but the AVPicture structure
- * itself is not.
- *
- * @param picture the AVPicture to be freed
+ * @deprecated unused
*/
+attribute_deprecated
void avpicture_free(AVPicture *picture);
/**
- * Fill in the AVPicture fields, always assume a linesize alignment of 1.
- *
- * @see av_image_fill_arrays().
+ * @deprecated use av_image_fill_arrays() instead.
*/
+attribute_deprecated
int avpicture_fill(AVPicture *picture, uint8_t *ptr,
enum AVPixelFormat pix_fmt, int width, int height);
/**
- * Copy pixel data from an AVPicture into a buffer, always assume a
- * linesize alignment of 1.
- *
- * @see av_image_copy_to_buffer().
+ * @deprecated use av_image_copy_to_buffer() instead.
*/
+attribute_deprecated
int avpicture_layout(const AVPicture* src, enum AVPixelFormat pix_fmt,
int width, int height,
unsigned char *dest, int dest_size);
/**
- * Calculate the size in bytes that a picture of the given width and height
- * would occupy if stored in the given picture format.
- * Always assume a linesize alignment of 1.
- *
- * @see av_image_get_buffer_size().
+ * @deprecated use av_image_get_buffer_size() instead.
*/
+attribute_deprecated
int avpicture_get_size(enum AVPixelFormat pix_fmt, int width, int height);
-#if FF_API_DEINTERLACE
/**
- * deinterlace - if not supported return -1
- *
- * @deprecated - use yadif (in libavfilter) instead
+ * @deprecated av_image_copy() instead.
*/
attribute_deprecated
-int avpicture_deinterlace(AVPicture *dst, const AVPicture *src,
- enum AVPixelFormat pix_fmt, int width, int height);
-#endif
-/**
- * Copy image src to dst. Wraps av_picture_data_copy() above.
- */
void av_picture_copy(AVPicture *dst, const AVPicture *src,
enum AVPixelFormat pix_fmt, int width, int height);
/**
- * Crop image top and left side.
+ * @deprecated unused
*/
+attribute_deprecated
int av_picture_crop(AVPicture *dst, const AVPicture *src,
enum AVPixelFormat pix_fmt, int top_band, int left_band);
/**
- * Pad image.
+ * @deprecated unused
*/
+attribute_deprecated
int av_picture_pad(AVPicture *dst, const AVPicture *src, int height, int width, enum AVPixelFormat pix_fmt,
int padtop, int padbottom, int padleft, int padright, int *color);
/**
* @}
*/
+#endif
/**
* @defgroup lavc_misc Utility functions
*/
const char *av_get_profile_name(const AVCodec *codec, int profile);
+/**
+ * Return a name for the specified profile, if available.
+ *
+ * @param codec_id the ID of the codec to which the requested profile belongs
+ * @param profile the profile value for which a name is requested
+ * @return A name for the profile if found, NULL otherwise.
+ *
+ * @note unlike av_get_profile_name(), which searches a list of profiles
+ * supported by a specific decoder or encoder implementation, this
+ * function searches the list of profiles from the AVCodecDescriptor
+ */
+const char *avcodec_profile_name(enum AVCodecID codec_id, int profile);
+
int avcodec_default_execute(AVCodecContext *c, int (*func)(AVCodecContext *c2, void *arg2),void *arg, int *ret, int count, int size);
int avcodec_default_execute2(AVCodecContext *c, int (*func)(AVCodecContext *c2, void *arg2, int, int),void *arg, int *ret, int count);
//FIXME func typedef
*/
int av_get_audio_frame_duration(AVCodecContext *avctx, int frame_bytes);
+/**
+ * This function is the same as av_get_audio_frame_duration(), except it works
+ * with AVCodecParameters instead of an AVCodecContext.
+ */
+int av_get_audio_frame_duration2(AVCodecParameters *par, int frame_bytes);
+#if FF_API_OLD_BSF
typedef struct AVBitStreamFilterContext {
void *priv_data;
struct AVBitStreamFilter *filter;
AVCodecParserContext *parser;
struct AVBitStreamFilterContext *next;
} AVBitStreamFilterContext;
+#endif
+typedef struct AVBSFInternal AVBSFInternal;
+
+/**
+ * The bitstream filter state.
+ *
+ * This struct must be allocated with av_bsf_alloc() and freed with
+ * av_bsf_free().
+ *
+ * The fields in the struct will only be changed (by the caller or by the
+ * filter) as described in their documentation, and are to be considered
+ * immutable otherwise.
+ */
+typedef struct AVBSFContext {
+ /**
+ * A class for logging and AVOptions
+ */
+ const AVClass *av_class;
+
+ /**
+ * The bitstream filter this context is an instance of.
+ */
+ const struct AVBitStreamFilter *filter;
+
+ /**
+ * Opaque libavcodec internal data. Must not be touched by the caller in any
+ * way.
+ */
+ AVBSFInternal *internal;
+
+ /**
+ * Opaque filter-specific private data. If filter->priv_class is non-NULL,
+ * this is an AVOptions-enabled struct.
+ */
+ void *priv_data;
+
+ /**
+ * Parameters of the input stream. Set by the caller before av_bsf_init().
+ */
+ AVCodecParameters *par_in;
+
+ /**
+ * Parameters of the output stream. Set by the filter in av_bsf_init().
+ */
+ AVCodecParameters *par_out;
+
+ /**
+ * The timebase used for the timestamps of the input packets. Set by the
+ * caller before av_bsf_init().
+ */
+ AVRational time_base_in;
+
+ /**
+ * The timebase used for the timestamps of the output packets. Set by the
+ * filter in av_bsf_init().
+ */
+ AVRational time_base_out;
+} AVBSFContext;
typedef struct AVBitStreamFilter {
const char *name;
+
+ /**
+ * A list of codec ids supported by the filter, terminated by
+ * AV_CODEC_ID_NONE.
+ * May be NULL, in that case the bitstream filter works with any codec id.
+ */
+ const enum AVCodecID *codec_ids;
+
+ /**
+ * A class for the private data, used to declare bitstream filter private
+ * AVOptions. This field is NULL for bitstream filters that do not declare
+ * any options.
+ *
+ * If this field is non-NULL, the first member of the filter private data
+ * must be a pointer to AVClass, which will be set by libavcodec generic
+ * code to this class.
+ */
+ const AVClass *priv_class;
+
+ /*****************************************************************
+ * No fields below this line are part of the public API. They
+ * may not be used outside of libavcodec and can be changed and
+ * removed at will.
+ * New public fields should be added right above.
+ *****************************************************************
+ */
+
int priv_data_size;
- int (*filter)(AVBitStreamFilterContext *bsfc,
- AVCodecContext *avctx, const char *args,
- uint8_t **poutbuf, int *poutbuf_size,
- const uint8_t *buf, int buf_size, int keyframe);
- void (*close)(AVBitStreamFilterContext *bsfc);
- struct AVBitStreamFilter *next;
+ int (*init)(AVBSFContext *ctx);
+ int (*filter)(AVBSFContext *ctx, AVPacket *pkt);
+ void (*close)(AVBSFContext *ctx);
} AVBitStreamFilter;
+#if FF_API_OLD_BSF
+/**
+ * @deprecated the old bitstream filtering API (using AVBitStreamFilterContext)
+ * is deprecated. Use the new bitstream filtering API (using AVBSFContext).
+ */
+attribute_deprecated
void av_register_bitstream_filter(AVBitStreamFilter *bsf);
+attribute_deprecated
AVBitStreamFilterContext *av_bitstream_filter_init(const char *name);
+attribute_deprecated
int av_bitstream_filter_filter(AVBitStreamFilterContext *bsfc,
AVCodecContext *avctx, const char *args,
uint8_t **poutbuf, int *poutbuf_size,
const uint8_t *buf, int buf_size, int keyframe);
+attribute_deprecated
void av_bitstream_filter_close(AVBitStreamFilterContext *bsf);
-
+attribute_deprecated
AVBitStreamFilter *av_bitstream_filter_next(const AVBitStreamFilter *f);
+#endif
+
+/**
+ * @return a bitstream filter with the specified name or NULL if no such
+ * bitstream filter exists.
+ */
+const AVBitStreamFilter *av_bsf_get_by_name(const char *name);
+
+/**
+ * Iterate over all registered bitstream filters.
+ *
+ * @param opaque a pointer where libavcodec will store the iteration state. Must
+ * point to NULL to start the iteration.
+ *
+ * @return the next registered bitstream filter or NULL when the iteration is
+ * finished
+ */
+const AVBitStreamFilter *av_bsf_next(void **opaque);
+
+/**
+ * Allocate a context for a given bitstream filter. The caller must fill in the
+ * context parameters as described in the documentation and then call
+ * av_bsf_init() before sending any data to the filter.
+ *
+ * @param filter the filter for which to allocate an instance.
+ * @param ctx a pointer into which the pointer to the newly-allocated context
+ * will be written. It must be freed with av_bsf_free() after the
+ * filtering is done.
+ *
+ * @return 0 on success, a negative AVERROR code on failure
+ */
+int av_bsf_alloc(const AVBitStreamFilter *filter, AVBSFContext **ctx);
+
+/**
+ * Prepare the filter for use, after all the parameters and options have been
+ * set.
+ */
+int av_bsf_init(AVBSFContext *ctx);
+
+/**
+ * Submit a packet for filtering.
+ *
+ * After sending each packet, the filter must be completely drained by calling
+ * av_bsf_receive_packet() repeatedly until it returns AVERROR(EAGAIN) or
+ * AVERROR_EOF.
+ *
+ * @param pkt the packet to filter. The bitstream filter will take ownership of
+ * the packet and reset the contents of pkt. pkt is not touched if an error occurs.
+ * This parameter may be NULL, which signals the end of the stream (i.e. no more
+ * packets will be sent). That will cause the filter to output any packets it
+ * may have buffered internally.
+ *
+ * @return 0 on success, a negative AVERROR on error.
+ */
+int av_bsf_send_packet(AVBSFContext *ctx, AVPacket *pkt);
+
+/**
+ * Retrieve a filtered packet.
+ *
+ * @param[out] pkt this struct will be filled with the contents of the filtered
+ * packet. It is owned by the caller and must be freed using
+ * av_packet_unref() when it is no longer needed.
+ * This parameter should be "clean" (i.e. freshly allocated
+ * with av_packet_alloc() or unreffed with av_packet_unref())
+ * when this function is called. If this function returns
+ * successfully, the contents of pkt will be completely
+ * overwritten by the returned data. On failure, pkt is not
+ * touched.
+ *
+ * @return 0 on success. AVERROR(EAGAIN) if more packets need to be sent to the
+ * filter (using av_bsf_send_packet()) to get more output. AVERROR_EOF if there
+ * will be no further output from the filter. Another negative AVERROR value if
+ * an error occurs.
+ *
+ * @note one input packet may result in several output packets, so after sending
+ * a packet with av_bsf_send_packet(), this function needs to be called
+ * repeatedly until it stops returning 0. It is also possible for a filter to
+ * output fewer packets than were sent to it, so this function may return
+ * AVERROR(EAGAIN) immediately after a successful av_bsf_send_packet() call.
+ */
+int av_bsf_receive_packet(AVBSFContext *ctx, AVPacket *pkt);
+
+/**
+ * Free a bitstream filter context and everything associated with it; write NULL
+ * into the supplied pointer.
+ */
+void av_bsf_free(AVBSFContext **ctx);
+
+/**
+ * Get the AVClass for AVBSFContext. It can be used in combination with
+ * AV_OPT_SEARCH_FAKE_OBJ for examining options.
+ *
+ * @see av_opt_find().
+ */
+const AVClass *av_bsf_get_class(void);
/* memory */
* Allocate a buffer with padding, reusing the given one if large enough.
*
* Same behaviour av_fast_malloc but the buffer has additional
- * FF_INPUT_PADDING_SIZE at the end which will always memset to 0.
- *
+ * AV_INPUT_PADDING_SIZE at the end which will always memset to 0.
*/
void av_fast_padded_malloc(void *ptr, unsigned int *size, size_t min_size);
* a pointer to an AVClass struct
* @param[in] feature string containing the name of the missing feature
* @param[in] want_sample indicates if samples are wanted which exhibit this feature.
- * If want_sample is non-zero, additional verbage will be added to the log
+ * If want_sample is non-zero, additional verbiage will be added to the log
* message which tells the user how to report samples to the development
* mailing list.
* @deprecated Use avpriv_report_missing_feature() instead.
*/
const AVCodecDescriptor *avcodec_descriptor_get_by_name(const char *name);
+/**
+ * Allocate a CPB properties structure and initialize its fields to default
+ * values.
+ *
+ * @param size if non-NULL, the size of the allocated struct will be written
+ * here. This is useful for embedding it in side data.
+ *
+ * @return the newly allocated struct or NULL on failure
+ */
+AVCPBProperties *av_cpb_properties_alloc(size_t *size);
+
/**
* @}
*/
projects / ffmpeg / blobdiff