/*
* copyright (c) 2001 Fabrice Bellard
*
- * This file is part of Libav.
+ * This file is part of FFmpeg.
*
- * Libav is free software; you can redistribute it and/or
+ * FFmpeg is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
- * Libav is distributed in the hope that it will be useful,
+ * FFmpeg is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
- * License along with Libav; if not, write to the Free Software
+ * License along with FFmpeg; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include "libavutil/log.h"
#include "libavutil/pixfmt.h"
#include "libavutil/rational.h"
+#include "libavutil/audioconvert.h"
#include "libavcodec/version.h"
/**
*
* If you add a codec ID to this list, add it so that
* 1. no value of a existing codec ID changes (that would break ABI),
- * 2. it is as close as possible to similar codecs.
+ * 2. Give it a value which when taken as ASCII is recognized uniquely by a human as this specific codec.
+ * This ensures that 2 forks can independently add CodecIDs without producing conflicts.
*/
enum CodecID {
CODEC_ID_NONE,
CODEC_ID_V410,
CODEC_ID_XWD,
CODEC_ID_CDXL,
+ CODEC_ID_XBM,
+ CODEC_ID_ZEROCODEC,
+ CODEC_ID_Y41P = MKBETAG('Y','4','1','P'),
+ CODEC_ID_ESCAPE130 = MKBETAG('E','1','3','0'),
+ CODEC_ID_EXR = MKBETAG('0','E','X','R'),
+ CODEC_ID_AVRP = MKBETAG('A','V','R','P'),
+
+ CODEC_ID_G2M = MKBETAG( 0 ,'G','2','M'),
+ CODEC_ID_AYUV = MKBETAG('A','Y','U','V'),
+ CODEC_ID_V308 = MKBETAG('V','3','0','8'),
+ CODEC_ID_V408 = MKBETAG('V','4','0','8'),
+ CODEC_ID_YUV4 = MKBETAG('Y','U','V','4'),
/* various PCM "codecs" */
CODEC_ID_FIRST_AUDIO = 0x10000, ///< A dummy id pointing at the start of audio codecs
CODEC_ID_8SVX_EXP,
CODEC_ID_8SVX_FIB,
CODEC_ID_BMV_AUDIO,
+ CODEC_ID_RALF,
+ CODEC_ID_FFWAVESYNTH = MKBETAG('F','F','W','S'),
+ CODEC_ID_8SVX_RAW = MKBETAG('8','S','V','X'),
+ CODEC_ID_SONIC = MKBETAG('S','O','N','C'),
+ CODEC_ID_SONIC_LS = MKBETAG('S','O','N','L'),
/* subtitle codecs */
CODEC_ID_FIRST_SUBTITLE = 0x17000, ///< A dummy ID pointing at the start of subtitle codecs.
CODEC_ID_HDMV_PGS_SUBTITLE,
CODEC_ID_DVB_TELETEXT,
CODEC_ID_SRT,
+ CODEC_ID_MICRODVD = MKBETAG('m','D','V','D'),
/* other specific kind of codecs (generally used for attachments) */
CODEC_ID_FIRST_UNKNOWN = 0x18000, ///< A dummy ID pointing at the start of various fake codecs.
CODEC_ID_TTF = 0x18000,
+ CODEC_ID_BINTEXT = MKBETAG('B','T','X','T'),
+ CODEC_ID_XBIN = MKBETAG('X','B','I','N'),
+ CODEC_ID_IDF = MKBETAG( 0 ,'I','D','F'),
CODEC_ID_PROBE = 0x19000, ///< codec_id is not known (like CODEC_ID_NONE) but lavf should attempt to identify it
* Note: If the first 23 bits of the additional bytes are not 0, then damaged
* MPEG bitstreams could cause overread and segfault.
*/
-#define FF_INPUT_BUFFER_PADDING_SIZE 8
+#define FF_INPUT_BUFFER_PADDING_SIZE 16
/**
* minimum encoding buffer size
AVCOL_TRC_UNSPECIFIED=2,
AVCOL_TRC_GAMMA22 =4, ///< also ITU-R BT470M / ITU-R BT1700 625 PAL & SECAM
AVCOL_TRC_GAMMA28 =5, ///< also ITU-R BT470BG
+ AVCOL_TRC_SMPTE240M =7,
AVCOL_TRC_NB , ///< Not part of ABI
};
AVCOL_SPC_BT470BG =5, ///< also ITU-R BT601-6 625 / ITU-R BT1358 625 / ITU-R BT1700 625 PAL & SECAM / IEC 61966-2-4 xvYCC601
AVCOL_SPC_SMPTE170M =6, ///< also ITU-R BT601-6 525 / ITU-R BT1358 525 / ITU-R BT1700 NTSC / functionally identical to above
AVCOL_SPC_SMPTE240M =7,
+ AVCOL_SPC_YCGCO =8,
AVCOL_SPC_NB , ///< Not part of ABI
};
#define CODEC_FLAG_BITEXACT 0x00800000 ///< Use only bitexact stuff (except (I)DCT).
/* Fx : Flag for h263+ extra options */
#define CODEC_FLAG_AC_PRED 0x01000000 ///< H.263 advanced intra coding / MPEG-4 AC prediction
-#define CODEC_FLAG_CBP_RD 0x04000000 ///< Use rate distortion optimization for cbp.
-#define CODEC_FLAG_QP_RD 0x08000000 ///< Use rate distortion optimization for qp selectioon.
#define CODEC_FLAG_LOOP_FILTER 0x00000800 ///< loop filter
#define CODEC_FLAG_INTERLACED_ME 0x20000000 ///< interlaced motion estimation
#define CODEC_FLAG_CLOSED_GOP 0x80000000
#define CODEC_FLAG2_FAST 0x00000001 ///< Allow non spec compliant speedup tricks.
-#define CODEC_FLAG2_STRICT_GOP 0x00000002 ///< Strictly enforce GOP size.
#define CODEC_FLAG2_NO_OUTPUT 0x00000004 ///< Skip bitstream encoding.
#define CODEC_FLAG2_LOCAL_HEADER 0x00000008 ///< Place global headers at every keyframe instead of in extradata.
+#define CODEC_FLAG2_DROP_FRAME_TIMECODE 0x00002000 ///< timecode is in drop frame format. DEPRECATED!!!!
+#if FF_API_MPV_GLOBAL_OPTS
+#define CODEC_FLAG_CBP_RD 0x04000000 ///< Use rate distortion optimization for cbp.
+#define CODEC_FLAG_QP_RD 0x08000000 ///< Use rate distortion optimization for qp selectioon.
+#define CODEC_FLAG2_STRICT_GOP 0x00000002 ///< Strictly enforce GOP size.
#define CODEC_FLAG2_SKIP_RD 0x00004000 ///< RD optimal MB level residual skipping
+#endif
#define CODEC_FLAG2_CHUNKS 0x00008000 ///< Input bitstream might be truncated at a packet boundaries instead of only at frame boundaries.
+#define CODEC_FLAG2_SHOW_ALL 0x00400000 ///< Show all frames before the first keyframe
/* Unsupported options :
* Syntax Arithmetic coding (SAC)
* Codec should fill in channel configuration and samplerate instead of container
*/
#define CODEC_CAP_CHANNEL_CONF 0x0400
+
/**
* Codec is able to deal with negative linesizes
*/
#define CODEC_CAP_NEG_LINESIZES 0x0800
+
/**
* Codec supports frame-level multithreading.
*/
* Audio encoder supports receiving a different number of samples in each call.
*/
#define CODEC_CAP_VARIABLE_FRAME_SIZE 0x10000
+/**
+ * Codec is lossless.
+ */
+#define CODEC_CAP_LOSSLESS 0x80000000
//The following defines may change, don't expect compatibility if you use them.
#define MB_TYPE_INTRA4x4 0x0001
AV_PKT_DATA_PALETTE,
AV_PKT_DATA_NEW_EXTRADATA,
AV_PKT_DATA_PARAM_CHANGE,
+ AV_PKT_DATA_H263_MB_INFO,
};
typedef struct AVPacket {
* s32le height
*/
+/**
+ * An AV_PKT_DATA_H263_MB_INFO side data packet contains a number of
+ * structures with info about macroblocks relevant to splitting the
+ * packet into smaller packets on macroblock edges (e.g. as for RFC 2190).
+ * That is, it does not necessarily contain info about all macroblocks,
+ * as long as the distance between macroblocks in the info is smaller
+ * than the target payload size.
+ * Each MB info structure is 12 bytes, and is laid out as follows:
+ * u32le bit offset from the start of the packet
+ * u8 current quantizer at the start of the macroblock
+ * u8 GOB number
+ * u16le macroblock address within the GOB
+ * u8 horizontal MV predictor
+ * u8 vertical MV predictor
+ * u8 horizontal MV predictor for block number 3
+ * u8 vertical MV predictor for block number 3
+ */
+
enum AVSideDataParamChangeFlags {
AV_SIDE_DATA_PARAM_CHANGE_CHANNEL_COUNT = 0x0001,
AV_SIDE_DATA_PARAM_CHANGE_CHANNEL_LAYOUT = 0x0002,
/**
* Audio Video Frame.
* New fields can be added to the end of AVFRAME with minor version
- * bumps. Removal, reordering and changes to existing fields require
+ * bumps. Similarly fields that are marked as to be only accessed by
+ * av_opt_ptr() can be reordered. This allows 2 forks to add fields
+ * without breaking compatibility with each other.
+ * Removal, reordering and changes in the remaining cases require
* a major version bump.
- * sizeof(AVFrame) must not be used outside libav*.
+ * sizeof(AVFrame) must not be used outside libavcodec.
*/
typedef struct AVFrame {
#define AV_NUM_DATA_POINTERS 8
int64_t reordered_opaque;
/**
- * hardware accelerator private data (Libav-allocated)
+ * hardware accelerator private data (FFmpeg-allocated)
* - encoding: unused
* - decoding: Set by libavcodec
*/
* - decoding: Set by libavcodec.
*/
uint8_t motion_subsample_log2;
+
+ /**
+ * frame timestamp estimated using various heuristics, in stream time base
+ * Code outside libavcodec should access this field using:
+ * av_opt_ptr(avcodec_get_frame_class(), frame, "best_effort_timestamp");
+ * - encoding: unused
+ * - decoding: set by libavcodec, read by user.
+ */
+ int64_t best_effort_timestamp;
+
+ /**
+ * reordered pos from the last AVPacket that has been input into the decoder
+ * Code outside libavcodec should access this field using:
+ * av_opt_ptr(avcodec_get_frame_class(), frame, "pkt_pos");
+ * - encoding: unused
+ * - decoding: Read by user.
+ */
+ int64_t pkt_pos;
} AVFrame;
struct AVCodecInternal;
* New fields can be added to the end with minor version bumps.
* Removal, reordering and changes to existing fields require a major
* version bump.
+ * Please use AVOptions (av_opt* / av_set/get*()) to access these fields from user
+ * applications.
* sizeof(AVCodecContext) must not be used outside libav*.
*/
typedef struct AVCodecContext {
* - set by avcodec_alloc_context3
*/
const AVClass *av_class;
+ int log_level_offset;
+
+ enum AVMediaType codec_type; /* see AVMEDIA_TYPE_xxx */
+ struct AVCodec *codec;
+ char codec_name[32];
+ enum CodecID codec_id; /* see CODEC_ID_xxx */
+
+ /**
+ * fourcc (LSB first, so "ABCD" -> ('D'<<24) + ('C'<<16) + ('B'<<8) + 'A').
+ * This is used to work around some encoder bugs.
+ * A demuxer should set this to what is stored in the field used to identify the codec.
+ * If there are multiple such fields in a container then the demuxer should choose the one
+ * which maximizes the information about the used codec.
+ * If the codec tag field in a container is larger than 32 bits then the demuxer should
+ * remap the longer ID to 32 bits with a table or other structure. Alternatively a new
+ * extra_codec_tag + size could be added but for this a clear advantage must be demonstrated
+ * first.
+ * - encoding: Set by user, if not then the default based on codec_id will be used.
+ * - decoding: Set by user, will be converted to uppercase by libavcodec during init.
+ */
+ unsigned int codec_tag;
+
+ /**
+ * fourcc from the AVI stream header (LSB first, so "ABCD" -> ('D'<<24) + ('C'<<16) + ('B'<<8) + 'A').
+ * This is used to work around some encoder bugs.
+ * - encoding: unused
+ * - decoding: Set by user, will be converted to uppercase by libavcodec during init.
+ */
+ unsigned int stream_codec_tag;
+
+#if FF_API_SUB_ID
+ /**
+ * @deprecated this field is unused
+ */
+ attribute_deprecated int sub_id;
+#endif
+
+ void *priv_data;
+
+ /**
+ * Private context used for internal data.
+ *
+ * Unlike priv_data, this is not codec-specific. It is used in general
+ * libavcodec functions.
+ */
+ struct AVCodecInternal *internal;
+
+ /**
+ * Private data of the user, can be used to carry app specific stuff.
+ * - encoding: Set by user.
+ * - decoding: Set by user.
+ */
+ void *opaque;
+
/**
* the average bitrate
* - encoding: Set by user; unused for constant quantizer encoding.
int bit_rate_tolerance;
/**
- * CODEC_FLAG_*.
+ * Global quality for codecs which cannot change it per frame.
+ * This should be proportional to MPEG-1/2/4 qscale.
* - encoding: Set by user.
- * - decoding: Set by user.
+ * - decoding: unused
*/
- int flags;
+ int global_quality;
/**
- * Some codecs need additional format info. It is stored here.
- * If any muxer uses this then ALL demuxers/parsers AND encoders for the
- * specific codec MUST set it correctly otherwise stream copy breaks.
- * In general use of this field by muxers is not recommended.
- * - encoding: Set by libavcodec.
- * - decoding: Set by libavcodec. (FIXME: Is this OK?)
+ * - encoding: Set by user.
+ * - decoding: unused
*/
- int sub_id;
+ int compression_level;
+#define FF_COMPRESSION_DEFAULT -1
/**
- * Motion estimation algorithm used for video coding.
- * 1 (zero), 2 (full), 3 (log), 4 (phods), 5 (epzs), 6 (x1), 7 (hex),
- * 8 (umh), 9 (iter), 10 (tesa) [7, 8, 10 are x264 specific, 9 is snow specific]
- * - encoding: MUST be set by user.
- * - decoding: unused
+ * CODEC_FLAG_*.
+ * - encoding: Set by user.
+ * - decoding: Set by user.
*/
- int me_method;
+ int flags;
+
+ /**
+ * CODEC_FLAG2_*
+ * - encoding: Set by user.
+ * - decoding: Set by user.
+ */
+ int flags2;
/**
* some codecs need / can use extradata like Huffman tables.
*/
AVRational time_base;
+ /**
+ * For some codecs, the time base is closer to the field rate than the frame rate.
+ * Most notably, H.264 and MPEG-2 specify time_base as half of frame duration
+ * if no telecine is used ...
+ *
+ * Set to time_base ticks per frame. Default 1, e.g., H.264/MPEG-2 set it to 2.
+ */
+ int ticks_per_frame;
+
+ /**
+ * Encoding: Number of frames delay there will be from the encoder input to
+ * the decoder output. (we assume the decoder matches the spec)
+ * Decoding: Number of frames delay in addition to what a standard decoder
+ * as specified in the spec would produce.
+ *
+ * Video:
+ * Number of frames the decoded output will be delayed relative to the
+ * encoded input.
+ *
+ * Audio:
+ * Number of "priming" samples added to the beginning of the stream
+ * during encoding. The decoded output will be delayed by this many
+ * samples relative to the input to the encoder. Note that this field is
+ * purely informational and does not directly affect the pts output by
+ * the encoder, which should always be based on the actual presentation
+ * time, including any delay.
+ *
+ * - encoding: Set by libavcodec.
+ * - decoding: Set by libavcodec.
+ */
+ int delay;
+
+
/* video only */
/**
* picture width / height.
*/
int width, height;
+ /**
+ * Bitstream width / height, may be different from width/height if lowres enabled.
+ * - encoding: unused
+ * - decoding: Set by user before init if known. Codec should override / dynamically change if needed.
+ */
+ int coded_width, coded_height;
+
#define FF_ASPECT_EXTENDED 15
/**
*/
enum PixelFormat pix_fmt;
+ /**
+ * Motion estimation algorithm used for video coding.
+ * 1 (zero), 2 (full), 3 (log), 4 (phods), 5 (epzs), 6 (x1), 7 (hex),
+ * 8 (umh), 9 (iter), 10 (tesa) [7, 8, 10 are x264 specific, 9 is snow specific]
+ * - encoding: MUST be set by user.
+ * - decoding: unused
+ */
+ int me_method;
+
/**
* If non NULL, 'draw_horiz_band' is called by the libavcodec
* decoder to draw a horizontal band. It improves cache usage. Not
const AVFrame *src, int offset[AV_NUM_DATA_POINTERS],
int y, int type, int height);
- /* audio only */
- int sample_rate; ///< samples per second
- int channels; ///< number of audio channels
-
/**
- * audio sample format
- * - encoding: Set by user.
- * - decoding: Set by libavcodec.
+ * callback to negotiate the pixelFormat
+ * @param fmt is the list of formats which are supported by the codec,
+ * it is terminated by -1 as 0 is a valid format, the formats are ordered by quality.
+ * The first is always the native one.
+ * @return the chosen format
+ * - encoding: unused
+ * - decoding: Set by user, if not set the native format will be chosen.
*/
- enum AVSampleFormat sample_fmt; ///< sample format
+ enum PixelFormat (*get_format)(struct AVCodecContext *s, const enum PixelFormat * fmt);
- /* The following data should not be initialized. */
/**
- * Samples per packet, initialized when calling 'init'.
+ * maximum number of B-frames between non-B-frames
+ * Note: The output will be delayed by max_b_frames+1 relative to the input.
+ * - encoding: Set by user.
+ * - decoding: unused
*/
- int frame_size;
- int frame_number; ///< audio or video frame number
+ int max_b_frames;
/**
- * Encoder delay.
- *
- * Video:
- * Number of frames the decoded output will be delayed relative to the
- * encoded input.
- *
- * Audio:
- * Number of "priming" samples added to the beginning of the stream
- * during encoding. The decoded output will be delayed by this many
- * samples relative to the input to the encoder. Note that this field is
- * purely informational and does not directly affect the pts output by
- * the encoder, which should always be based on the actual presentation
- * time, including any delay.
- *
- * - encoding: Set by libavcodec.
+ * qscale factor between IP and B-frames
+ * If > 0 then the last P-frame quantizer will be used (q= lastp_q*factor+offset).
+ * If < 0 then normal ratecontrol will be done (q= -normal_q*factor+offset).
+ * - encoding: Set by user.
* - decoding: unused
*/
- int delay;
+ float b_quant_factor;
- /* - encoding parameters */
- float qcompress; ///< amount of qscale change between easy & hard scenes (0.0-1.0)
- float qblur; ///< amount of qscale smoothing over time (0.0-1.0)
+ /** obsolete FIXME remove */
+ int rc_strategy;
+#define FF_RC_STRATEGY_XVID 1
+
+ int b_frame_strategy;
+#if FF_API_MPV_GLOBAL_OPTS
/**
- * minimum quantizer
+ * luma single coefficient elimination threshold
* - encoding: Set by user.
* - decoding: unused
*/
- int qmin;
+ attribute_deprecated int luma_elim_threshold;
/**
- * maximum quantizer
+ * chroma single coeff elimination threshold
* - encoding: Set by user.
* - decoding: unused
*/
- int qmax;
+ attribute_deprecated int chroma_elim_threshold;
+#endif
/**
- * maximum quantizer difference between frames
+ * qscale offset between IP and B-frames
* - encoding: Set by user.
* - decoding: unused
*/
- int max_qdiff;
+ float b_quant_offset;
/**
- * maximum number of B-frames between non-B-frames
- * Note: The output will be delayed by max_b_frames+1 relative to the input.
+ * Size of the frame reordering buffer in the decoder.
+ * For MPEG-2 it is 1 IPB or 0 low delay IP.
+ * - encoding: Set by libavcodec.
+ * - decoding: Set by libavcodec.
+ */
+ int has_b_frames;
+
+ /**
+ * 0-> h263 quant 1-> mpeg quant
* - encoding: Set by user.
* - decoding: unused
*/
- int max_b_frames;
+ int mpeg_quant;
/**
- * qscale factor between IP and B-frames
- * If > 0 then the last P-frame quantizer will be used (q= lastp_q*factor+offset).
+ * qscale factor between P and I-frames
+ * If > 0 then the last p frame quantizer will be used (q= lastp_q*factor+offset).
* If < 0 then normal ratecontrol will be done (q= -normal_q*factor+offset).
* - encoding: Set by user.
* - decoding: unused
*/
- float b_quant_factor;
+ float i_quant_factor;
- /** obsolete FIXME remove */
- int rc_strategy;
-#define FF_RC_STRATEGY_XVID 1
+ /**
+ * qscale offset between P and I-frames
+ * - encoding: Set by user.
+ * - decoding: unused
+ */
+ float i_quant_offset;
- int b_frame_strategy;
+ /**
+ * luminance masking (0-> disabled)
+ * - encoding: Set by user.
+ * - decoding: unused
+ */
+ float lumi_masking;
- struct AVCodec *codec;
+ /**
+ * temporary complexity masking (0-> disabled)
+ * - encoding: Set by user.
+ * - decoding: unused
+ */
+ float temporal_cplx_masking;
- void *priv_data;
-
- int rtp_payload_size; /* The size of the RTP payload: the coder will */
- /* do its best to deliver a chunk with size */
- /* below rtp_payload_size, the chunk will start */
- /* with a start code on some codecs like H.263. */
- /* This doesn't take account of any particular */
- /* headers inside the transmitted RTP payload. */
-
-
- /* The RTP callback: This function is called */
- /* every time the encoder has a packet to send. */
- /* It depends on the encoder if the data starts */
- /* with a Start Code (it should). H.263 does. */
- /* mb_nb contains the number of macroblocks */
- /* encoded in the RTP payload. */
- void (*rtp_callback)(struct AVCodecContext *avctx, void *data, int size, int mb_nb);
-
- /* statistics, used for 2-pass encoding */
- int mv_bits;
- int header_bits;
- int i_tex_bits;
- int p_tex_bits;
- int i_count;
- int p_count;
- int skip_count;
- int misc_bits;
-
- /**
- * number of bits used for the previously encoded frame
- * - encoding: Set by libavcodec.
- * - decoding: unused
- */
- int frame_bits;
-
- /**
- * Private data of the user, can be used to carry app specific stuff.
- * - encoding: Set by user.
- * - decoding: Set by user.
- */
- void *opaque;
-
- char codec_name[32];
- enum AVMediaType codec_type; /* see AVMEDIA_TYPE_xxx */
- enum CodecID codec_id; /* see CODEC_ID_xxx */
-
- /**
- * fourcc (LSB first, so "ABCD" -> ('D'<<24) + ('C'<<16) + ('B'<<8) + 'A').
- * This is used to work around some encoder bugs.
- * A demuxer should set this to what is stored in the field used to identify the codec.
- * If there are multiple such fields in a container then the demuxer should choose the one
- * which maximizes the information about the used codec.
- * If the codec tag field in a container is larger than 32 bits then the demuxer should
- * remap the longer ID to 32 bits with a table or other structure. Alternatively a new
- * extra_codec_tag + size could be added but for this a clear advantage must be demonstrated
- * first.
- * - encoding: Set by user, if not then the default based on codec_id will be used.
- * - decoding: Set by user, will be converted to uppercase by libavcodec during init.
- */
- unsigned int codec_tag;
-
- /**
- * Work around bugs in encoders which sometimes cannot be detected automatically.
- * - encoding: Set by user
- * - decoding: Set by user
- */
- int workaround_bugs;
-#define FF_BUG_AUTODETECT 1 ///< autodetection
-#define FF_BUG_OLD_MSMPEG4 2
-#define FF_BUG_XVID_ILACE 4
-#define FF_BUG_UMP4 8
-#define FF_BUG_NO_PADDING 16
-#define FF_BUG_AMV 32
-#define FF_BUG_AC_VLC 0 ///< Will be removed, libavcodec can now handle these non-compliant files by default.
-#define FF_BUG_QPEL_CHROMA 64
-#define FF_BUG_STD_QPEL 128
-#define FF_BUG_QPEL_CHROMA2 256
-#define FF_BUG_DIRECT_BLOCKSIZE 512
-#define FF_BUG_EDGE 1024
-#define FF_BUG_HPEL_CHROMA 2048
-#define FF_BUG_DC_CLIP 4096
-#define FF_BUG_MS 8192 ///< Work around various bugs in Microsoft's broken decoders.
-#define FF_BUG_TRUNCATED 16384
-
- /**
- * luma single coefficient elimination threshold
- * - encoding: Set by user.
- * - decoding: unused
- */
- int luma_elim_threshold;
-
- /**
- * chroma single coeff elimination threshold
- * - encoding: Set by user.
- * - decoding: unused
- */
- int chroma_elim_threshold;
-
- /**
- * strictly follow the standard (MPEG4, ...).
- * - encoding: Set by user.
- * - decoding: Set by user.
- * Setting this to STRICT or higher means the encoder and decoder will
- * generally do stupid things, whereas setting it to unofficial or lower
- * will mean the encoder might produce output that is not supported by all
- * spec-compliant decoders. Decoders don't differentiate between normal,
- * unofficial and experimental (that is, they always try to decode things
- * when they can) unless they are explicitly asked to behave stupidly
- * (=strictly conform to the specs)
- */
- int strict_std_compliance;
-#define FF_COMPLIANCE_VERY_STRICT 2 ///< Strictly conform to an older more strict version of the spec or reference software.
-#define FF_COMPLIANCE_STRICT 1 ///< Strictly conform to all the things in the spec no matter what consequences.
-#define FF_COMPLIANCE_NORMAL 0
-#define FF_COMPLIANCE_UNOFFICIAL -1 ///< Allow unofficial extensions
-#define FF_COMPLIANCE_EXPERIMENTAL -2 ///< Allow nonstandardized experimental things.
-
- /**
- * qscale offset between IP and B-frames
- * - encoding: Set by user.
- * - decoding: unused
- */
- float b_quant_offset;
-
- /**
- * Called at the beginning of each frame to get a buffer for it.
- *
- * The function will set AVFrame.data[], AVFrame.linesize[].
- * AVFrame.extended_data[] must also be set, but it should be the same as
- * AVFrame.data[] except for planar audio with more channels than can fit
- * in AVFrame.data[]. In that case, AVFrame.data[] shall still contain as
- * many data pointers as it can hold.
- *
- * if CODEC_CAP_DR1 is not set then get_buffer() must call
- * avcodec_default_get_buffer() instead of providing buffers allocated by
- * some other means.
- *
- * AVFrame.data[] should be 32- or 16-byte-aligned unless the CPU doesn't
- * need it. avcodec_default_get_buffer() aligns the output buffer properly,
- * but if get_buffer() is overridden then alignment considerations should
- * be taken into account.
- *
- * @see avcodec_default_get_buffer()
- *
- * Video:
- *
- * If pic.reference is set then the frame will be read later by libavcodec.
- * avcodec_align_dimensions2() should be used to find the required width and
- * height, as they normally need to be rounded up to the next multiple of 16.
- *
- * If frame multithreading is used and thread_safe_callbacks is set,
- * it may be called from a different thread, but not from more than one at
- * once. Does not need to be reentrant.
- *
- * @see release_buffer(), reget_buffer()
- * @see avcodec_align_dimensions2()
- *
- * Audio:
- *
- * Decoders request a buffer of a particular size by setting
- * AVFrame.nb_samples prior to calling get_buffer(). The decoder may,
- * however, utilize only part of the buffer by setting AVFrame.nb_samples
- * to a smaller value in the output frame.
- *
- * Decoders cannot use the buffer after returning from
- * avcodec_decode_audio4(), so they will not call release_buffer(), as it
- * is assumed to be released immediately upon return.
- *
- * As a convenience, av_samples_get_buffer_size() and
- * av_samples_fill_arrays() in libavutil may be used by custom get_buffer()
- * functions to find the required data size and to fill data pointers and
- * linesize. In AVFrame.linesize, only linesize[0] may be set for audio
- * since all planes must be the same size.
- *
- * @see av_samples_get_buffer_size(), av_samples_fill_arrays()
- *
- * - encoding: unused
- * - decoding: Set by libavcodec, user can override.
- */
- int (*get_buffer)(struct AVCodecContext *c, AVFrame *pic);
-
- /**
- * Called to release buffers which were allocated with get_buffer.
- * A released buffer can be reused in get_buffer().
- * pic.data[*] must be set to NULL.
- * May be called from a different thread if frame multithreading is used,
- * but not by more than one thread at once, so does not need to be reentrant.
- * - encoding: unused
- * - decoding: Set by libavcodec, user can override.
- */
- void (*release_buffer)(struct AVCodecContext *c, AVFrame *pic);
-
- /**
- * Size of the frame reordering buffer in the decoder.
- * For MPEG-2 it is 1 IPB or 0 low delay IP.
- * - encoding: Set by libavcodec.
- * - decoding: Set by libavcodec.
- */
- int has_b_frames;
-
- /**
- * number of bytes per packet if constant and known or 0
- * Used by some WAV based audio codecs.
- */
- int block_align;
-
- /**
- * 0-> h263 quant 1-> mpeg quant
- * - encoding: Set by user.
- * - decoding: unused
- */
- int mpeg_quant;
-
- /**
- * pass1 encoding statistics output buffer
- * - encoding: Set by libavcodec.
- * - decoding: unused
- */
- char *stats_out;
-
- /**
- * pass2 encoding statistics input buffer
- * Concatenated stuff from stats_out of pass1 should be placed here.
- * - encoding: Allocated/set/freed by user.
- * - decoding: unused
- */
- char *stats_in;
-
- /**
- * ratecontrol qmin qmax limiting method
- * 0-> clipping, 1-> use a nice continous function to limit qscale wthin qmin/qmax.
- * - encoding: Set by user.
- * - decoding: unused
- */
- float rc_qsquish;
-
- float rc_qmod_amp;
- int rc_qmod_freq;
-
- /**
- * ratecontrol override, see RcOverride
- * - encoding: Allocated/set/freed by user.
- * - decoding: unused
- */
- RcOverride *rc_override;
- int rc_override_count;
-
- /**
- * rate control equation
- * - encoding: Set by user
- * - decoding: unused
- */
- const char *rc_eq;
-
- /**
- * maximum bitrate
- * - encoding: Set by user.
- * - decoding: unused
- */
- int rc_max_rate;
-
- /**
- * minimum bitrate
- * - encoding: Set by user.
- * - decoding: unused
- */
- int rc_min_rate;
-
- /**
- * decoder bitstream buffer size
- * - encoding: Set by user.
- * - decoding: unused
- */
- int rc_buffer_size;
- float rc_buffer_aggressivity;
-
- /**
- * qscale factor between P and I-frames
- * If > 0 then the last p frame quantizer will be used (q= lastp_q*factor+offset).
- * If < 0 then normal ratecontrol will be done (q= -normal_q*factor+offset).
- * - encoding: Set by user.
- * - decoding: unused
- */
- float i_quant_factor;
-
- /**
- * qscale offset between P and I-frames
- * - encoding: Set by user.
- * - decoding: unused
- */
- float i_quant_offset;
-
- /**
- * initial complexity for pass1 ratecontrol
- * - encoding: Set by user.
- * - decoding: unused
- */
- float rc_initial_cplx;
-
- /**
- * DCT algorithm, see FF_DCT_* below
- * - encoding: Set by user.
- * - decoding: unused
- */
- int dct_algo;
-#define FF_DCT_AUTO 0
-#define FF_DCT_FASTINT 1
-#define FF_DCT_INT 2
-#define FF_DCT_MMX 3
-#define FF_DCT_ALTIVEC 5
-#define FF_DCT_FAAN 6
-
- /**
- * luminance masking (0-> disabled)
- * - encoding: Set by user.
- * - decoding: unused
- */
- float lumi_masking;
-
- /**
- * temporary complexity masking (0-> disabled)
- * - encoding: Set by user.
- * - decoding: unused
- */
- float temporal_cplx_masking;
-
- /**
- * spatial complexity masking (0-> disabled)
- * - encoding: Set by user.
- * - decoding: unused
- */
- float spatial_cplx_masking;
+ /**
+ * spatial complexity masking (0-> disabled)
+ * - encoding: Set by user.
+ * - decoding: unused
+ */
+ float spatial_cplx_masking;
/**
* p block masking (0-> disabled)
*/
float dark_masking;
- /**
- * IDCT algorithm, see FF_IDCT_* below.
- * - encoding: Set by user.
- * - decoding: Set by user.
- */
- int idct_algo;
-#define FF_IDCT_AUTO 0
-#define FF_IDCT_INT 1
-#define FF_IDCT_SIMPLE 2
-#define FF_IDCT_SIMPLEMMX 3
-#define FF_IDCT_LIBMPEG2MMX 4
-#define FF_IDCT_MMI 5
-#define FF_IDCT_ARM 7
-#define FF_IDCT_ALTIVEC 8
-#define FF_IDCT_SH4 9
-#define FF_IDCT_SIMPLEARM 10
-#define FF_IDCT_H264 11
-#define FF_IDCT_VP3 12
-#define FF_IDCT_IPP 13
-#define FF_IDCT_XVIDMMX 14
-#define FF_IDCT_CAVS 15
-#define FF_IDCT_SIMPLEARMV5TE 16
-#define FF_IDCT_SIMPLEARMV6 17
-#define FF_IDCT_SIMPLEVIS 18
-#define FF_IDCT_WMV2 19
-#define FF_IDCT_FAAN 20
-#define FF_IDCT_EA 21
-#define FF_IDCT_SIMPLENEON 22
-#define FF_IDCT_SIMPLEALPHA 23
-#define FF_IDCT_BINK 24
-
/**
* slice count
* - encoding: Set by libavcodec.
* - decoding: Set by user (or 0).
*/
int slice_count;
- /**
- * slice offsets in the frame in bytes
- * - encoding: Set/allocated by libavcodec.
- * - decoding: Set/allocated by user (or NULL).
- */
- int *slice_offset;
-
- /**
- * error concealment flags
- * - encoding: unused
- * - decoding: Set by user.
- */
- int error_concealment;
-#define FF_EC_GUESS_MVS 1
-#define FF_EC_DEBLOCK 2
-
- /**
- * dsp_mask could be add used to disable unwanted CPU features
- * CPU features (i.e. MMX, SSE. ...)
- *
- * With the FORCE flag you may instead enable given CPU features.
- * (Dangerous: Usable in case of misdetection, improper usage however will
- * result into program crash.)
- */
- unsigned dsp_mask;
-
- /**
- * bits per sample/pixel from the demuxer (needed for huffyuv).
- * - encoding: Set by libavcodec.
- * - decoding: Set by user.
- */
- int bits_per_coded_sample;
-
/**
* prediction method (needed for huffyuv)
* - encoding: Set by user.
- * - decoding: unused
- */
- int prediction_method;
-#define FF_PRED_LEFT 0
-#define FF_PRED_PLANE 1
-#define FF_PRED_MEDIAN 2
-
- /**
- * sample aspect ratio (0 if unknown)
- * That is the width of a pixel divided by the height of the pixel.
- * Numerator and denominator must be relatively prime and smaller than 256 for some video standards.
- * - encoding: Set by user.
- * - decoding: Set by libavcodec.
- */
- AVRational sample_aspect_ratio;
-
- /**
- * the picture in the bitstream
- * - encoding: Set by libavcodec.
- * - decoding: Set by libavcodec.
- */
- AVFrame *coded_frame;
-
- /**
- * debug
- * - encoding: Set by user.
- * - decoding: Set by user.
- */
- int debug;
-#define FF_DEBUG_PICT_INFO 1
-#define FF_DEBUG_RC 2
-#define FF_DEBUG_BITSTREAM 4
-#define FF_DEBUG_MB_TYPE 8
-#define FF_DEBUG_QP 16
-#define FF_DEBUG_MV 32
-#define FF_DEBUG_DCT_COEFF 0x00000040
-#define FF_DEBUG_SKIP 0x00000080
-#define FF_DEBUG_STARTCODE 0x00000100
-#define FF_DEBUG_PTS 0x00000200
-#define FF_DEBUG_ER 0x00000400
-#define FF_DEBUG_MMCO 0x00000800
-#define FF_DEBUG_BUGS 0x00001000
-#define FF_DEBUG_VIS_QP 0x00002000
-#define FF_DEBUG_VIS_MB_TYPE 0x00004000
-#define FF_DEBUG_BUFFERS 0x00008000
-#define FF_DEBUG_THREADS 0x00010000
+ * - decoding: unused
+ */
+ int prediction_method;
+#define FF_PRED_LEFT 0
+#define FF_PRED_PLANE 1
+#define FF_PRED_MEDIAN 2
/**
- * debug
- * - encoding: Set by user.
- * - decoding: Set by user.
+ * slice offsets in the frame in bytes
+ * - encoding: Set/allocated by libavcodec.
+ * - decoding: Set/allocated by user (or NULL).
*/
- int debug_mv;
-#define FF_DEBUG_VIS_MV_P_FOR 0x00000001 //visualize forward predicted MVs of P frames
-#define FF_DEBUG_VIS_MV_B_FOR 0x00000002 //visualize forward predicted MVs of B frames
-#define FF_DEBUG_VIS_MV_B_BACK 0x00000004 //visualize backward predicted MVs of B frames
+ int *slice_offset;
/**
- * error
- * - encoding: Set by libavcodec if flags&CODEC_FLAG_PSNR.
- * - decoding: unused
+ * sample aspect ratio (0 if unknown)
+ * That is the width of a pixel divided by the height of the pixel.
+ * Numerator and denominator must be relatively prime and smaller than 256 for some video standards.
+ * - encoding: Set by user.
+ * - decoding: Set by libavcodec.
*/
- uint64_t error[AV_NUM_DATA_POINTERS];
+ AVRational sample_aspect_ratio;
/**
* motion estimation comparison function
*/
int me_subpel_quality;
- /**
- * callback to negotiate the pixelFormat
- * @param fmt is the list of formats which are supported by the codec,
- * it is terminated by -1 as 0 is a valid format, the formats are ordered by quality.
- * The first is always the native one.
- * @return the chosen format
- * - encoding: unused
- * - decoding: Set by user, if not set the native format will be chosen.
- */
- enum PixelFormat (*get_format)(struct AVCodecContext *s, const enum PixelFormat * fmt);
-
/**
* DTG active format information (additional aspect ratio
* information only used in DVB MPEG-2 transport streams)
*/
int inter_quant_bias;
+#if FF_API_COLOR_TABLE_ID
/**
* color table ID
* - encoding: unused
* - decoding: Which clrtable should be used for 8bit RGB images.
* Tables have to be stored somewhere. FIXME
*/
- int color_table_id;
+ attribute_deprecated int color_table_id;
+#endif
+
+ /**
+ * slice flags
+ * - encoding: unused
+ * - decoding: Set by user.
+ */
+ int slice_flags;
+#define SLICE_FLAG_CODED_ORDER 0x0001 ///< draw_horiz_band() is called in coded order instead of display
+#define SLICE_FLAG_ALLOW_FIELD 0x0002 ///< allow draw_horiz_band() with field slices (MPEG2 field pics)
+#define SLICE_FLAG_ALLOW_PLANE 0x0004 ///< allow draw_horiz_band() with 1 component at a time (SVQ1)
+
+ /**
+ * XVideo Motion Acceleration
+ * - encoding: forbidden
+ * - decoding: set by decoder
+ */
+ int xvmc_acceleration;
+
+ /**
+ * macroblock decision mode
+ * - encoding: Set by user.
+ * - decoding: unused
+ */
+ int mb_decision;
+#define FF_MB_DECISION_SIMPLE 0 ///< uses mb_cmp
+#define FF_MB_DECISION_BITS 1 ///< chooses the one which needs the fewest bits
+#define FF_MB_DECISION_RD 2 ///< rate distortion
+
+ /**
+ * custom intra quantization matrix
+ * - encoding: Set by user, can be NULL.
+ * - decoding: Set by libavcodec.
+ */
+ uint16_t *intra_matrix;
+
+ /**
+ * custom inter quantization matrix
+ * - encoding: Set by user, can be NULL.
+ * - decoding: Set by libavcodec.
+ */
+ uint16_t *inter_matrix;
+
+ /**
+ * scene change detection threshold
+ * 0 is default, larger means fewer detected scene changes.
+ * - encoding: Set by user.
+ * - decoding: unused
+ */
+ int scenechange_threshold;
+
+ /**
+ * noise reduction strength
+ * - encoding: Set by user.
+ * - decoding: unused
+ */
+ int noise_reduction;
+
+#if FF_API_INTER_THRESHOLD
+ /**
+ * @deprecated this field is unused
+ */
+ attribute_deprecated int inter_threshold;
+#endif
+
+#if FF_API_MPV_GLOBAL_OPTS
+ /**
+ * @deprecated use mpegvideo private options instead
+ */
+ attribute_deprecated int quantizer_noise_shaping;
+#endif
+
+ /**
+ * Motion estimation threshold below which no motion estimation is
+ * performed, but instead the user specified motion vectors are used.
+ *
+ * - encoding: Set by user.
+ * - decoding: unused
+ */
+ int me_threshold;
+
+ /**
+ * Macroblock threshold below which the user specified macroblock types will be used.
+ * - encoding: Set by user.
+ * - decoding: unused
+ */
+ int mb_threshold;
+
+ /**
+ * precision of the intra DC coefficient - 8
+ * - encoding: Set by user.
+ * - decoding: unused
+ */
+ int intra_dc_precision;
+
+ /**
+ * Number of macroblock rows at the top which are skipped.
+ * - encoding: unused
+ * - decoding: Set by user.
+ */
+ int skip_top;
+
+ /**
+ * Number of macroblock rows at the bottom which are skipped.
+ * - encoding: unused
+ * - decoding: Set by user.
+ */
+ int skip_bottom;
+
+ /**
+ * Border processing masking, raises the quantizer for mbs on the borders
+ * of the picture.
+ * - encoding: Set by user.
+ * - decoding: unused
+ */
+ float border_masking;
+
+ /**
+ * minimum MB lagrange multipler
+ * - encoding: Set by user.
+ * - decoding: unused
+ */
+ int mb_lmin;
+
+ /**
+ * maximum MB lagrange multipler
+ * - encoding: Set by user.
+ * - decoding: unused
+ */
+ int mb_lmax;
+
+ /**
+ *
+ * - encoding: Set by user.
+ * - decoding: unused
+ */
+ int me_penalty_compensation;
+
+ /**
+ *
+ * - encoding: Set by user.
+ * - decoding: unused
+ */
+ int bidir_refine;
+
+ /**
+ *
+ * - encoding: Set by user.
+ * - decoding: unused
+ */
+ int brd_scale;
+
+ /**
+ * minimum GOP size
+ * - encoding: Set by user.
+ * - decoding: unused
+ */
+ int keyint_min;
+
+ /**
+ * number of reference frames
+ * - encoding: Set by user.
+ * - decoding: Set by lavc.
+ */
+ int refs;
+
+ /**
+ * chroma qp offset from luma
+ * - encoding: Set by user.
+ * - decoding: unused
+ */
+ int chromaoffset;
+
+ /**
+ * Multiplied by qscale for each frame and added to scene_change_score.
+ * - encoding: Set by user.
+ * - decoding: unused
+ */
+ int scenechange_factor;
+
+ /**
+ *
+ * Note: Value depends upon the compare function used for fullpel ME.
+ * - encoding: Set by user.
+ * - decoding: unused
+ */
+ int mv0_threshold;
+
+ /**
+ * Adjust sensitivity of b_frame_strategy 1.
+ * - encoding: Set by user.
+ * - decoding: unused
+ */
+ int b_sensitivity;
+
+ /**
+ * Chromaticity coordinates of the source primaries.
+ * - encoding: Set by user
+ * - decoding: Set by libavcodec
+ */
+ enum AVColorPrimaries color_primaries;
+
+ /**
+ * Color Transfer Characteristic.
+ * - encoding: Set by user
+ * - decoding: Set by libavcodec
+ */
+ enum AVColorTransferCharacteristic color_trc;
+
+ /**
+ * YUV colorspace type.
+ * - encoding: Set by user
+ * - decoding: Set by libavcodec
+ */
+ enum AVColorSpace colorspace;
+
+ /**
+ * MPEG vs JPEG YUV range.
+ * - encoding: Set by user
+ * - decoding: Set by libavcodec
+ */
+ enum AVColorRange color_range;
+
+ /**
+ * This defines the location of chroma samples.
+ * - encoding: Set by user
+ * - decoding: Set by libavcodec
+ */
+ enum AVChromaLocation chroma_sample_location;
/**
- * Global quality for codecs which cannot change it per frame.
- * This should be proportional to MPEG-1/2/4 qscale.
- * - encoding: Set by user.
+ * Number of slices.
+ * Indicates number of picture subdivisions. Used for parallelized
+ * decoding.
+ * - encoding: Set by user
* - decoding: unused
*/
- int global_quality;
+ int slices;
+
+ /** Field order
+ * - encoding: set by libavcodec
+ * - decoding: Set by libavcodec
+ */
+ enum AVFieldOrder field_order;
+
+ /* audio only */
+ int sample_rate; ///< samples per second
+ int channels; ///< number of audio channels
-#define FF_CODER_TYPE_VLC 0
-#define FF_CODER_TYPE_AC 1
-#define FF_CODER_TYPE_RAW 2
-#define FF_CODER_TYPE_RLE 3
-#define FF_CODER_TYPE_DEFLATE 4
/**
- * coder type
+ * audio sample format
* - encoding: Set by user.
- * - decoding: unused
+ * - decoding: Set by libavcodec.
*/
- int coder_type;
+ enum AVSampleFormat sample_fmt; ///< sample format
+ /* The following data should not be initialized. */
/**
- * context model
- * - encoding: Set by user.
- * - decoding: unused
+ * Samples per packet, initialized when calling 'init'.
*/
- int context_model;
+ int frame_size;
/**
- * slice flags
- * - encoding: unused
- * - decoding: Set by user.
+ * Frame counter, set by libavcodec.
+ *
+ * - decoding: total number of frames returned from the decoder so far.
+ * - encoding: total number of frames passed to the encoder so far.
+ *
+ * @note the counter is not incremented if encoding/decoding resulted in
+ * an error.
*/
- int slice_flags;
-#define SLICE_FLAG_CODED_ORDER 0x0001 ///< draw_horiz_band() is called in coded order instead of display
-#define SLICE_FLAG_ALLOW_FIELD 0x0002 ///< allow draw_horiz_band() with field slices (MPEG2 field pics)
-#define SLICE_FLAG_ALLOW_PLANE 0x0004 ///< allow draw_horiz_band() with 1 component at a time (SVQ1)
+ int frame_number;
/**
- * XVideo Motion Acceleration
- * - encoding: forbidden
- * - decoding: set by decoder
+ * number of bytes per packet if constant and known or 0
+ * Used by some WAV based audio codecs.
*/
- int xvmc_acceleration;
+ int block_align;
/**
- * macroblock decision mode
+ * Audio cutoff bandwidth (0 means "automatic")
* - encoding: Set by user.
* - decoding: unused
*/
- int mb_decision;
-#define FF_MB_DECISION_SIMPLE 0 ///< uses mb_cmp
-#define FF_MB_DECISION_BITS 1 ///< chooses the one which needs the fewest bits
-#define FF_MB_DECISION_RD 2 ///< rate distortion
+ int cutoff;
+#if FF_API_REQUEST_CHANNELS
/**
- * custom intra quantization matrix
- * - encoding: Set by user, can be NULL.
- * - decoding: Set by libavcodec.
+ * Decoder should decode to this many channels if it can (0 for default)
+ * - encoding: unused
+ * - decoding: Set by user.
+ * @deprecated Deprecated in favor of request_channel_layout.
*/
- uint16_t *intra_matrix;
+ int request_channels;
+#endif
/**
- * custom inter quantization matrix
- * - encoding: Set by user, can be NULL.
- * - decoding: Set by libavcodec.
+ * Audio channel layout.
+ * - encoding: set by user.
+ * - decoding: set by user, may be overwritten by libavcodec.
*/
- uint16_t *inter_matrix;
+ uint64_t channel_layout;
/**
- * fourcc from the AVI stream header (LSB first, so "ABCD" -> ('D'<<24) + ('C'<<16) + ('B'<<8) + 'A').
- * This is used to work around some encoder bugs.
+ * Request decoder to use this channel layout if it can (0 for default)
* - encoding: unused
- * - decoding: Set by user, will be converted to uppercase by libavcodec during init.
+ * - decoding: Set by user.
*/
- unsigned int stream_codec_tag;
+ uint64_t request_channel_layout;
/**
- * scene change detection threshold
- * 0 is default, larger means fewer detected scene changes.
+ * Type of service that the audio stream conveys.
* - encoding: Set by user.
- * - decoding: unused
+ * - decoding: Set by libavcodec.
*/
- int scenechange_threshold;
+ enum AVAudioServiceType audio_service_type;
/**
- * minimum Lagrange multipler
- * - encoding: Set by user.
- * - decoding: unused
+ * desired sample format
+ * - encoding: Not used.
+ * - decoding: Set by user.
+ * Decoder will decode to this format if it can.
*/
- int lmin;
+ enum AVSampleFormat request_sample_fmt;
/**
- * maximum Lagrange multipler
- * - encoding: Set by user.
- * - decoding: unused
+ * Called at the beginning of each frame to get a buffer for it.
+ *
+ * The function will set AVFrame.data[], AVFrame.linesize[].
+ * AVFrame.extended_data[] must also be set, but it should be the same as
+ * AVFrame.data[] except for planar audio with more channels than can fit
+ * in AVFrame.data[]. In that case, AVFrame.data[] shall still contain as
+ * many data pointers as it can hold.
+ *
+ * if CODEC_CAP_DR1 is not set then get_buffer() must call
+ * avcodec_default_get_buffer() instead of providing buffers allocated by
+ * some other means.
+ *
+ * AVFrame.data[] should be 32- or 16-byte-aligned unless the CPU doesn't
+ * need it. avcodec_default_get_buffer() aligns the output buffer properly,
+ * but if get_buffer() is overridden then alignment considerations should
+ * be taken into account.
+ *
+ * @see avcodec_default_get_buffer()
+ *
+ * Video:
+ *
+ * If pic.reference is set then the frame will be read later by libavcodec.
+ * avcodec_align_dimensions2() should be used to find the required width and
+ * height, as they normally need to be rounded up to the next multiple of 16.
+ *
+ * If frame multithreading is used and thread_safe_callbacks is set,
+ * it may be called from a different thread, but not from more than one at
+ * once. Does not need to be reentrant.
+ *
+ * @see release_buffer(), reget_buffer()
+ * @see avcodec_align_dimensions2()
+ *
+ * Audio:
+ *
+ * Decoders request a buffer of a particular size by setting
+ * AVFrame.nb_samples prior to calling get_buffer(). The decoder may,
+ * however, utilize only part of the buffer by setting AVFrame.nb_samples
+ * to a smaller value in the output frame.
+ *
+ * Decoders cannot use the buffer after returning from
+ * avcodec_decode_audio4(), so they will not call release_buffer(), as it
+ * is assumed to be released immediately upon return.
+ *
+ * As a convenience, av_samples_get_buffer_size() and
+ * av_samples_fill_arrays() in libavutil may be used by custom get_buffer()
+ * functions to find the required data size and to fill data pointers and
+ * linesize. In AVFrame.linesize, only linesize[0] may be set for audio
+ * since all planes must be the same size.
+ *
+ * @see av_samples_get_buffer_size(), av_samples_fill_arrays()
+ *
+ * - encoding: unused
+ * - decoding: Set by libavcodec, user can override.
*/
- int lmax;
+ int (*get_buffer)(struct AVCodecContext *c, AVFrame *pic);
/**
- * noise reduction strength
- * - encoding: Set by user.
- * - decoding: unused
+ * Called to release buffers which were allocated with get_buffer.
+ * A released buffer can be reused in get_buffer().
+ * pic.data[*] must be set to NULL.
+ * May be called from a different thread if frame multithreading is used,
+ * but not by more than one thread at once, so does not need to be reentrant.
+ * - encoding: unused
+ * - decoding: Set by libavcodec, user can override.
*/
- int noise_reduction;
+ void (*release_buffer)(struct AVCodecContext *c, AVFrame *pic);
/**
* Called at the beginning of a frame to get cr buffer for it.
*/
int (*reget_buffer)(struct AVCodecContext *c, AVFrame *pic);
- /**
- * Number of bits which should be loaded into the rc buffer before decoding starts.
- * - encoding: Set by user.
- * - decoding: unused
- */
- int rc_initial_buffer_occupancy;
+
+ /* - encoding parameters */
+ float qcompress; ///< amount of qscale change between easy & hard scenes (0.0-1.0)
+ float qblur; ///< amount of qscale smoothing over time (0.0-1.0)
/**
- *
+ * minimum quantizer
* - encoding: Set by user.
* - decoding: unused
*/
- int inter_threshold;
+ int qmin;
/**
- * CODEC_FLAG2_*
+ * maximum quantizer
* - encoding: Set by user.
- * - decoding: Set by user.
+ * - decoding: unused
*/
- int flags2;
+ int qmax;
/**
- * Simulates errors in the bitstream to test error concealment.
+ * maximum quantizer difference between frames
* - encoding: Set by user.
* - decoding: unused
*/
- int error_rate;
+ int max_qdiff;
/**
- * quantizer noise shaping
+ * ratecontrol qmin qmax limiting method
+ * 0-> clipping, 1-> use a nice continous function to limit qscale wthin qmin/qmax.
* - encoding: Set by user.
* - decoding: unused
*/
- int quantizer_noise_shaping;
+ float rc_qsquish;
+
+ float rc_qmod_amp;
+ int rc_qmod_freq;
/**
- * thread count
- * is used to decide how many independent tasks should be passed to execute()
+ * decoder bitstream buffer size
* - encoding: Set by user.
- * - decoding: Set by user.
+ * - decoding: unused
*/
- int thread_count;
+ int rc_buffer_size;
/**
- * The codec may call this to execute several independent things.
- * It will return only after finishing all tasks.
- * The user may replace this with some multithreaded implementation,
- * the default implementation will execute the parts serially.
- * @param count the number of things to execute
- * - encoding: Set by libavcodec, user can override.
- * - decoding: Set by libavcodec, user can override.
+ * ratecontrol override, see RcOverride
+ * - encoding: Allocated/set/freed by user.
+ * - decoding: unused
*/
- int (*execute)(struct AVCodecContext *c, int (*func)(struct AVCodecContext *c2, void *arg), void *arg2, int *ret, int count, int size);
+ int rc_override_count;
+ RcOverride *rc_override;
/**
- * thread opaque
- * Can be used by execute() to store some per AVCodecContext stuff.
- * - encoding: set by execute()
- * - decoding: set by execute()
+ * rate control equation
+ * - encoding: Set by user
+ * - decoding: unused
*/
- void *thread_opaque;
+ const char *rc_eq;
/**
- * Motion estimation threshold below which no motion estimation is
- * performed, but instead the user specified motion vectors are used.
- *
+ * maximum bitrate
* - encoding: Set by user.
* - decoding: unused
*/
- int me_threshold;
+ int rc_max_rate;
/**
- * Macroblock threshold below which the user specified macroblock types will be used.
+ * minimum bitrate
* - encoding: Set by user.
* - decoding: unused
*/
- int mb_threshold;
+ int rc_min_rate;
+
+ float rc_buffer_aggressivity;
/**
- * precision of the intra DC coefficient - 8
+ * initial complexity for pass1 ratecontrol
* - encoding: Set by user.
* - decoding: unused
*/
- int intra_dc_precision;
+ float rc_initial_cplx;
/**
- * noise vs. sse weight for the nsse comparsion function
+ * Ratecontrol attempt to use, at maximum, <value> of what can be used without an underflow.
* - encoding: Set by user.
- * - decoding: unused
+ * - decoding: unused.
*/
- int nsse_weight;
+ float rc_max_available_vbv_use;
/**
- * Number of macroblock rows at the top which are skipped.
- * - encoding: unused
- * - decoding: Set by user.
+ * Ratecontrol attempt to use, at least, <value> times the amount needed to prevent a vbv overflow.
+ * - encoding: Set by user.
+ * - decoding: unused.
*/
- int skip_top;
+ float rc_min_vbv_overflow_use;
/**
- * Number of macroblock rows at the bottom which are skipped.
- * - encoding: unused
- * - decoding: Set by user.
+ * Number of bits which should be loaded into the rc buffer before decoding starts.
+ * - encoding: Set by user.
+ * - decoding: unused
*/
- int skip_bottom;
+ int rc_initial_buffer_occupancy;
+#define FF_CODER_TYPE_VLC 0
+#define FF_CODER_TYPE_AC 1
+#define FF_CODER_TYPE_RAW 2
+#define FF_CODER_TYPE_RLE 3
+#define FF_CODER_TYPE_DEFLATE 4
/**
- * profile
+ * coder type
* - encoding: Set by user.
- * - decoding: Set by libavcodec.
+ * - decoding: unused
*/
- int profile;
-#define FF_PROFILE_UNKNOWN -99
-#define FF_PROFILE_RESERVED -100
-
-#define FF_PROFILE_AAC_MAIN 0
-#define FF_PROFILE_AAC_LOW 1
-#define FF_PROFILE_AAC_SSR 2
-#define FF_PROFILE_AAC_LTP 3
-
-#define FF_PROFILE_DTS 20
-#define FF_PROFILE_DTS_ES 30
-#define FF_PROFILE_DTS_96_24 40
-#define FF_PROFILE_DTS_HD_HRA 50
-#define FF_PROFILE_DTS_HD_MA 60
-
-#define FF_PROFILE_MPEG2_422 0
-#define FF_PROFILE_MPEG2_HIGH 1
-#define FF_PROFILE_MPEG2_SS 2
-#define FF_PROFILE_MPEG2_SNR_SCALABLE 3
-#define FF_PROFILE_MPEG2_MAIN 4
-#define FF_PROFILE_MPEG2_SIMPLE 5
-
-#define FF_PROFILE_H264_CONSTRAINED (1<<9) // 8+1; constraint_set1_flag
-#define FF_PROFILE_H264_INTRA (1<<11) // 8+3; constraint_set3_flag
-
-#define FF_PROFILE_H264_BASELINE 66
-#define FF_PROFILE_H264_CONSTRAINED_BASELINE (66|FF_PROFILE_H264_CONSTRAINED)
-#define FF_PROFILE_H264_MAIN 77
-#define FF_PROFILE_H264_EXTENDED 88
-#define FF_PROFILE_H264_HIGH 100
-#define FF_PROFILE_H264_HIGH_10 110
-#define FF_PROFILE_H264_HIGH_10_INTRA (110|FF_PROFILE_H264_INTRA)
-#define FF_PROFILE_H264_HIGH_422 122
-#define FF_PROFILE_H264_HIGH_422_INTRA (122|FF_PROFILE_H264_INTRA)
-#define FF_PROFILE_H264_HIGH_444 144
-#define FF_PROFILE_H264_HIGH_444_PREDICTIVE 244
-#define FF_PROFILE_H264_HIGH_444_INTRA (244|FF_PROFILE_H264_INTRA)
-#define FF_PROFILE_H264_CAVLC_444 44
-
-#define FF_PROFILE_VC1_SIMPLE 0
-#define FF_PROFILE_VC1_MAIN 1
-#define FF_PROFILE_VC1_COMPLEX 2
-#define FF_PROFILE_VC1_ADVANCED 3
-
-#define FF_PROFILE_MPEG4_SIMPLE 0
-#define FF_PROFILE_MPEG4_SIMPLE_SCALABLE 1
-#define FF_PROFILE_MPEG4_CORE 2
-#define FF_PROFILE_MPEG4_MAIN 3
-#define FF_PROFILE_MPEG4_N_BIT 4
-#define FF_PROFILE_MPEG4_SCALABLE_TEXTURE 5
-#define FF_PROFILE_MPEG4_SIMPLE_FACE_ANIMATION 6
-#define FF_PROFILE_MPEG4_BASIC_ANIMATED_TEXTURE 7
-#define FF_PROFILE_MPEG4_HYBRID 8
-#define FF_PROFILE_MPEG4_ADVANCED_REAL_TIME 9
-#define FF_PROFILE_MPEG4_CORE_SCALABLE 10
-#define FF_PROFILE_MPEG4_ADVANCED_CODING 11
-#define FF_PROFILE_MPEG4_ADVANCED_CORE 12
-#define FF_PROFILE_MPEG4_ADVANCED_SCALABLE_TEXTURE 13
-#define FF_PROFILE_MPEG4_SIMPLE_STUDIO 14
-#define FF_PROFILE_MPEG4_ADVANCED_SIMPLE 15
+ int coder_type;
/**
- * level
+ * context model
* - encoding: Set by user.
- * - decoding: Set by libavcodec.
+ * - decoding: unused
*/
- int level;
-#define FF_LEVEL_UNKNOWN -99
+ int context_model;
/**
- * low resolution decoding, 1-> 1/2 size, 2->1/4 size
- * - encoding: unused
- * - decoding: Set by user.
+ * minimum Lagrange multipler
+ * - encoding: Set by user.
+ * - decoding: unused
*/
- int lowres;
+ int lmin;
/**
- * Bitstream width / height, may be different from width/height if lowres enabled.
- * - encoding: unused
- * - decoding: Set by user before init if known. Codec should override / dynamically change if needed.
+ * maximum Lagrange multipler
+ * - encoding: Set by user.
+ * - decoding: unused
*/
- int coded_width, coded_height;
+ int lmax;
/**
* frame skip threshold
int frame_skip_cmp;
/**
- * Border processing masking, raises the quantizer for mbs on the borders
- * of the picture.
+ * trellis RD quantization
* - encoding: Set by user.
* - decoding: unused
*/
- float border_masking;
+ int trellis;
/**
- * minimum MB lagrange multipler
* - encoding: Set by user.
* - decoding: unused
*/
- int mb_lmin;
+ int min_prediction_order;
/**
- * maximum MB lagrange multipler
* - encoding: Set by user.
* - decoding: unused
*/
- int mb_lmax;
+ int max_prediction_order;
/**
- *
- * - encoding: Set by user.
+ * GOP timecode frame start number
+ * - encoding: Set by user, in non drop frame format
+ * - decoding: Set by libavcodec (timecode in the 25 bits format, -1 if unset)
+ */
+ int64_t timecode_frame_start;
+
+ /* The RTP callback: This function is called */
+ /* every time the encoder has a packet to send. */
+ /* It depends on the encoder if the data starts */
+ /* with a Start Code (it should). H.263 does. */
+ /* mb_nb contains the number of macroblocks */
+ /* encoded in the RTP payload. */
+ void (*rtp_callback)(struct AVCodecContext *avctx, void *data, int size, int mb_nb);
+
+ int rtp_payload_size; /* The size of the RTP payload: the coder will */
+ /* do its best to deliver a chunk with size */
+ /* below rtp_payload_size, the chunk will start */
+ /* with a start code on some codecs like H.263. */
+ /* This doesn't take account of any particular */
+ /* headers inside the transmitted RTP payload. */
+
+ /* statistics, used for 2-pass encoding */
+ int mv_bits;
+ int header_bits;
+ int i_tex_bits;
+ int p_tex_bits;
+ int i_count;
+ int p_count;
+ int skip_count;
+ int misc_bits;
+
+ /**
+ * number of bits used for the previously encoded frame
+ * - encoding: Set by libavcodec.
* - decoding: unused
*/
- int me_penalty_compensation;
+ int frame_bits;
/**
- *
- * - encoding: unused
- * - decoding: Set by user.
+ * pass1 encoding statistics output buffer
+ * - encoding: Set by libavcodec.
+ * - decoding: unused
*/
- enum AVDiscard skip_loop_filter;
+ char *stats_out;
/**
- *
- * - encoding: unused
- * - decoding: Set by user.
+ * pass2 encoding statistics input buffer
+ * Concatenated stuff from stats_out of pass1 should be placed here.
+ * - encoding: Allocated/set/freed by user.
+ * - decoding: unused
*/
- enum AVDiscard skip_idct;
+ char *stats_in;
/**
- *
- * - encoding: unused
- * - decoding: Set by user.
+ * Work around bugs in encoders which sometimes cannot be detected automatically.
+ * - encoding: Set by user
+ * - decoding: Set by user
*/
- enum AVDiscard skip_frame;
+ int workaround_bugs;
+#define FF_BUG_AUTODETECT 1 ///< autodetection
+#define FF_BUG_OLD_MSMPEG4 2
+#define FF_BUG_XVID_ILACE 4
+#define FF_BUG_UMP4 8
+#define FF_BUG_NO_PADDING 16
+#define FF_BUG_AMV 32
+#define FF_BUG_AC_VLC 0 ///< Will be removed, libavcodec can now handle these non-compliant files by default.
+#define FF_BUG_QPEL_CHROMA 64
+#define FF_BUG_STD_QPEL 128
+#define FF_BUG_QPEL_CHROMA2 256
+#define FF_BUG_DIRECT_BLOCKSIZE 512
+#define FF_BUG_EDGE 1024
+#define FF_BUG_HPEL_CHROMA 2048
+#define FF_BUG_DC_CLIP 4096
+#define FF_BUG_MS 8192 ///< Work around various bugs in Microsoft's broken decoders.
+#define FF_BUG_TRUNCATED 16384
/**
- *
+ * strictly follow the standard (MPEG4, ...).
* - encoding: Set by user.
- * - decoding: unused
+ * - decoding: Set by user.
+ * Setting this to STRICT or higher means the encoder and decoder will
+ * generally do stupid things, whereas setting it to unofficial or lower
+ * will mean the encoder might produce output that is not supported by all
+ * spec-compliant decoders. Decoders don't differentiate between normal,
+ * unofficial and experimental (that is, they always try to decode things
+ * when they can) unless they are explicitly asked to behave stupidly
+ * (=strictly conform to the specs)
*/
- int bidir_refine;
+ int strict_std_compliance;
+#define FF_COMPLIANCE_VERY_STRICT 2 ///< Strictly conform to an older more strict version of the spec or reference software.
+#define FF_COMPLIANCE_STRICT 1 ///< Strictly conform to all the things in the spec no matter what consequences.
+#define FF_COMPLIANCE_NORMAL 0
+#define FF_COMPLIANCE_UNOFFICIAL -1 ///< Allow unofficial extensions
+#define FF_COMPLIANCE_EXPERIMENTAL -2 ///< Allow nonstandardized experimental things.
/**
- *
- * - encoding: Set by user.
- * - decoding: unused
+ * error concealment flags
+ * - encoding: unused
+ * - decoding: Set by user.
*/
- int brd_scale;
+ int error_concealment;
+#define FF_EC_GUESS_MVS 1
+#define FF_EC_DEBLOCK 2
/**
- * minimum GOP size
+ * debug
* - encoding: Set by user.
- * - decoding: unused
+ * - decoding: Set by user.
*/
- int keyint_min;
+ int debug;
+#define FF_DEBUG_PICT_INFO 1
+#define FF_DEBUG_RC 2
+#define FF_DEBUG_BITSTREAM 4
+#define FF_DEBUG_MB_TYPE 8
+#define FF_DEBUG_QP 16
+#define FF_DEBUG_MV 32
+#define FF_DEBUG_DCT_COEFF 0x00000040
+#define FF_DEBUG_SKIP 0x00000080
+#define FF_DEBUG_STARTCODE 0x00000100
+#define FF_DEBUG_PTS 0x00000200
+#define FF_DEBUG_ER 0x00000400
+#define FF_DEBUG_MMCO 0x00000800
+#define FF_DEBUG_BUGS 0x00001000
+#define FF_DEBUG_VIS_QP 0x00002000
+#define FF_DEBUG_VIS_MB_TYPE 0x00004000
+#define FF_DEBUG_BUFFERS 0x00008000
+#define FF_DEBUG_THREADS 0x00010000
/**
- * number of reference frames
+ * debug
* - encoding: Set by user.
- * - decoding: Set by lavc.
+ * - decoding: Set by user.
*/
- int refs;
+ int debug_mv;
+#define FF_DEBUG_VIS_MV_P_FOR 0x00000001 //visualize forward predicted MVs of P frames
+#define FF_DEBUG_VIS_MV_B_FOR 0x00000002 //visualize forward predicted MVs of B frames
+#define FF_DEBUG_VIS_MV_B_BACK 0x00000004 //visualize backward predicted MVs of B frames
/**
- * chroma qp offset from luma
- * - encoding: Set by user.
- * - decoding: unused
+ * Error recognition; may misdetect some more or less valid parts as errors.
+ * - encoding: unused
+ * - decoding: Set by user.
*/
- int chromaoffset;
+ int err_recognition;
+#define AV_EF_CRCCHECK (1<<0)
+#define AV_EF_BITSTREAM (1<<1)
+#define AV_EF_BUFFER (1<<2)
+#define AV_EF_EXPLODE (1<<3)
+
+#define AV_EF_CAREFUL (1<<16)
+#define AV_EF_COMPLIANT (1<<17)
+#define AV_EF_AGGRESSIVE (1<<18)
+
/**
- * trellis RD quantization
- * - encoding: Set by user.
- * - decoding: unused
+ * opaque 64bit number (generally a PTS) that will be reordered and
+ * output in AVFrame.reordered_opaque
+ * @deprecated in favor of pkt_pts
+ * - encoding: unused
+ * - decoding: Set by user.
*/
- int trellis;
+ int64_t reordered_opaque;
/**
- * Audio cutoff bandwidth (0 means "automatic")
- * - encoding: Set by user.
- * - decoding: unused
+ * Hardware accelerator in use
+ * - encoding: unused.
+ * - decoding: Set by libavcodec
*/
- int cutoff;
+ struct AVHWAccel *hwaccel;
/**
- * Multiplied by qscale for each frame and added to scene_change_score.
- * - encoding: Set by user.
- * - decoding: unused
+ * Hardware accelerator context.
+ * For some hardware accelerators, a global context needs to be
+ * provided by the user. In that case, this holds display-dependent
+ * data FFmpeg cannot instantiate itself. Please refer to the
+ * FFmpeg HW accelerator documentation to know how to fill this
+ * is. e.g. for VA API, this is a struct vaapi_context.
+ * - encoding: unused
+ * - decoding: Set by user
*/
- int scenechange_factor;
+ void *hwaccel_context;
/**
- *
- * Note: Value depends upon the compare function used for fullpel ME.
- * - encoding: Set by user.
+ * error
+ * - encoding: Set by libavcodec if flags&CODEC_FLAG_PSNR.
* - decoding: unused
*/
- int mv0_threshold;
+ uint64_t error[AV_NUM_DATA_POINTERS];
/**
- * Adjust sensitivity of b_frame_strategy 1.
+ * DCT algorithm, see FF_DCT_* below
* - encoding: Set by user.
* - decoding: unused
*/
- int b_sensitivity;
+ int dct_algo;
+#define FF_DCT_AUTO 0
+#define FF_DCT_FASTINT 1
+#define FF_DCT_INT 2
+#define FF_DCT_MMX 3
+#define FF_DCT_ALTIVEC 5
+#define FF_DCT_FAAN 6
/**
+ * IDCT algorithm, see FF_IDCT_* below.
* - encoding: Set by user.
- * - decoding: unused
+ * - decoding: Set by user.
*/
- int compression_level;
-#define FF_COMPRESSION_DEFAULT -1
+ int idct_algo;
+#define FF_IDCT_AUTO 0
+#define FF_IDCT_INT 1
+#define FF_IDCT_SIMPLE 2
+#define FF_IDCT_SIMPLEMMX 3
+#define FF_IDCT_LIBMPEG2MMX 4
+#define FF_IDCT_MMI 5
+#define FF_IDCT_ARM 7
+#define FF_IDCT_ALTIVEC 8
+#define FF_IDCT_SH4 9
+#define FF_IDCT_SIMPLEARM 10
+#define FF_IDCT_H264 11
+#define FF_IDCT_VP3 12
+#define FF_IDCT_IPP 13
+#define FF_IDCT_XVIDMMX 14
+#define FF_IDCT_CAVS 15
+#define FF_IDCT_SIMPLEARMV5TE 16
+#define FF_IDCT_SIMPLEARMV6 17
+#define FF_IDCT_SIMPLEVIS 18
+#define FF_IDCT_WMV2 19
+#define FF_IDCT_FAAN 20
+#define FF_IDCT_EA 21
+#define FF_IDCT_SIMPLENEON 22
+#define FF_IDCT_SIMPLEALPHA 23
+#define FF_IDCT_BINK 24
/**
- * - encoding: Set by user.
- * - decoding: unused
+ * dsp_mask could be add used to disable unwanted CPU features
+ * CPU features (i.e. MMX, SSE. ...)
+ *
+ * With the FORCE flag you may instead enable given CPU features.
+ * (Dangerous: Usable in case of misdetection, improper usage however will
+ * result into program crash.)
*/
- int min_prediction_order;
+ unsigned dsp_mask;
/**
- * - encoding: Set by user.
- * - decoding: unused
+ * bits per sample/pixel from the demuxer (needed for huffyuv).
+ * - encoding: Set by libavcodec.
+ * - decoding: Set by user.
*/
- int max_prediction_order;
+ int bits_per_coded_sample;
/**
- * GOP timecode frame start number, in non drop frame format
- * - encoding: Set by user.
- * - decoding: unused
+ * Bits per sample/pixel of internal libavcodec pixel/sample format.
+ * - encoding: set by user.
+ * - decoding: set by libavcodec.
*/
- int64_t timecode_frame_start;
+ int bits_per_raw_sample;
-#if FF_API_REQUEST_CHANNELS
/**
- * Decoder should decode to this many channels if it can (0 for default)
+ * low resolution decoding, 1-> 1/2 size, 2->1/4 size
* - encoding: unused
* - decoding: Set by user.
- * @deprecated Deprecated in favor of request_channel_layout.
*/
- int request_channels;
-#endif
+ int lowres;
/**
- * opaque 64bit number (generally a PTS) that will be reordered and
- * output in AVFrame.reordered_opaque
- * @deprecated in favor of pkt_pts
- * - encoding: unused
- * - decoding: Set by user.
+ * the picture in the bitstream
+ * - encoding: Set by libavcodec.
+ * - decoding: Set by libavcodec.
*/
- int64_t reordered_opaque;
+ AVFrame *coded_frame;
/**
- * Bits per sample/pixel of internal libavcodec pixel/sample format.
- * - encoding: set by user.
- * - decoding: set by libavcodec.
+ * thread count
+ * is used to decide how many independent tasks should be passed to execute()
+ * - encoding: Set by user.
+ * - decoding: Set by user.
*/
- int bits_per_raw_sample;
+ int thread_count;
/**
- * Audio channel layout.
- * - encoding: set by user.
- * - decoding: set by libavcodec.
+ * Which multithreading methods to use.
+ * Use of FF_THREAD_FRAME will increase decoding delay by one frame per thread,
+ * so clients which cannot provide future frames should not use it.
+ *
+ * - encoding: Set by user, otherwise the default is used.
+ * - decoding: Set by user, otherwise the default is used.
*/
- uint64_t channel_layout;
+ int thread_type;
+#define FF_THREAD_FRAME 1 ///< Decode more than one frame at once
+#define FF_THREAD_SLICE 2 ///< Decode more than one part of a single frame at once
/**
- * Request decoder to use this channel layout if it can (0 for default)
- * - encoding: unused
- * - decoding: Set by user.
+ * Which multithreading methods are in use by the codec.
+ * - encoding: Set by libavcodec.
+ * - decoding: Set by libavcodec.
*/
- uint64_t request_channel_layout;
+ int active_thread_type;
/**
- * Ratecontrol attempt to use, at maximum, <value> of what can be used without an underflow.
+ * Set by the client if its custom get_buffer() callback can be called
+ * from another thread, which allows faster multithreaded decoding.
+ * draw_horiz_band() will be called from other threads regardless of this setting.
+ * Ignored if the default get_buffer() is used.
* - encoding: Set by user.
- * - decoding: unused.
+ * - decoding: Set by user.
*/
- float rc_max_available_vbv_use;
+ int thread_safe_callbacks;
/**
- * Ratecontrol attempt to use, at least, <value> times the amount needed to prevent a vbv overflow.
- * - encoding: Set by user.
- * - decoding: unused.
+ * The codec may call this to execute several independent things.
+ * It will return only after finishing all tasks.
+ * The user may replace this with some multithreaded implementation,
+ * the default implementation will execute the parts serially.
+ * @param count the number of things to execute
+ * - encoding: Set by libavcodec, user can override.
+ * - decoding: Set by libavcodec, user can override.
*/
- float rc_min_vbv_overflow_use;
+ int (*execute)(struct AVCodecContext *c, int (*func)(struct AVCodecContext *c2, void *arg), void *arg2, int *ret, int count, int size);
/**
- * Hardware accelerator in use
- * - encoding: unused.
- * - decoding: Set by libavcodec
+ * The codec may call this to execute several independent things.
+ * It will return only after finishing all tasks.
+ * The user may replace this with some multithreaded implementation,
+ * the default implementation will execute the parts serially.
+ * Also see avcodec_thread_init and e.g. the --enable-pthread configure option.
+ * @param c context passed also to func
+ * @param count the number of things to execute
+ * @param arg2 argument passed unchanged to func
+ * @param ret return values of executed functions, must have space for "count" values. May be NULL.
+ * @param func function that will be called count times, with jobnr from 0 to count-1.
+ * threadnr will be in the range 0 to c->thread_count-1 < MAX_THREADS and so that no
+ * two instances of func executing at the same time will have the same threadnr.
+ * @return always 0 currently, but code should handle a future improvement where when any call to func
+ * returns < 0 no further calls to func may be done and < 0 is returned.
+ * - encoding: Set by libavcodec, user can override.
+ * - decoding: Set by libavcodec, user can override.
*/
- struct AVHWAccel *hwaccel;
+ int (*execute2)(struct AVCodecContext *c, int (*func)(struct AVCodecContext *c2, void *arg, int jobnr, int threadnr), void *arg2, int *ret, int count);
/**
- * For some codecs, the time base is closer to the field rate than the frame rate.
- * Most notably, H.264 and MPEG-2 specify time_base as half of frame duration
- * if no telecine is used ...
- *
- * Set to time_base ticks per frame. Default 1, e.g., H.264/MPEG-2 set it to 2.
+ * thread opaque
+ * Can be used by execute() to store some per AVCodecContext stuff.
+ * - encoding: set by execute()
+ * - decoding: set by execute()
*/
- int ticks_per_frame;
+ void *thread_opaque;
/**
- * Hardware accelerator context.
- * For some hardware accelerators, a global context needs to be
- * provided by the user. In that case, this holds display-dependent
- * data Libav cannot instantiate itself. Please refer to the
- * Libav HW accelerator documentation to know how to fill this
- * is. e.g. for VA API, this is a struct vaapi_context.
- * - encoding: unused
- * - decoding: Set by user
+ * noise vs. sse weight for the nsse comparsion function
+ * - encoding: Set by user.
+ * - decoding: unused
*/
- void *hwaccel_context;
+ int nsse_weight;
/**
- * Chromaticity coordinates of the source primaries.
- * - encoding: Set by user
- * - decoding: Set by libavcodec
+ * profile
+ * - encoding: Set by user.
+ * - decoding: Set by libavcodec.
*/
- enum AVColorPrimaries color_primaries;
+ int profile;
+#define FF_PROFILE_UNKNOWN -99
+#define FF_PROFILE_RESERVED -100
+
+#define FF_PROFILE_AAC_MAIN 0
+#define FF_PROFILE_AAC_LOW 1
+#define FF_PROFILE_AAC_SSR 2
+#define FF_PROFILE_AAC_LTP 3
+
+#define FF_PROFILE_DTS 20
+#define FF_PROFILE_DTS_ES 30
+#define FF_PROFILE_DTS_96_24 40
+#define FF_PROFILE_DTS_HD_HRA 50
+#define FF_PROFILE_DTS_HD_MA 60
+
+#define FF_PROFILE_MPEG2_422 0
+#define FF_PROFILE_MPEG2_HIGH 1
+#define FF_PROFILE_MPEG2_SS 2
+#define FF_PROFILE_MPEG2_SNR_SCALABLE 3
+#define FF_PROFILE_MPEG2_MAIN 4
+#define FF_PROFILE_MPEG2_SIMPLE 5
+
+#define FF_PROFILE_H264_CONSTRAINED (1<<9) // 8+1; constraint_set1_flag
+#define FF_PROFILE_H264_INTRA (1<<11) // 8+3; constraint_set3_flag
+
+#define FF_PROFILE_H264_BASELINE 66
+#define FF_PROFILE_H264_CONSTRAINED_BASELINE (66|FF_PROFILE_H264_CONSTRAINED)
+#define FF_PROFILE_H264_MAIN 77
+#define FF_PROFILE_H264_EXTENDED 88
+#define FF_PROFILE_H264_HIGH 100
+#define FF_PROFILE_H264_HIGH_10 110
+#define FF_PROFILE_H264_HIGH_10_INTRA (110|FF_PROFILE_H264_INTRA)
+#define FF_PROFILE_H264_HIGH_422 122
+#define FF_PROFILE_H264_HIGH_422_INTRA (122|FF_PROFILE_H264_INTRA)
+#define FF_PROFILE_H264_HIGH_444 144
+#define FF_PROFILE_H264_HIGH_444_PREDICTIVE 244
+#define FF_PROFILE_H264_HIGH_444_INTRA (244|FF_PROFILE_H264_INTRA)
+#define FF_PROFILE_H264_CAVLC_444 44
- /**
- * Color Transfer Characteristic.
- * - encoding: Set by user
- * - decoding: Set by libavcodec
- */
- enum AVColorTransferCharacteristic color_trc;
+#define FF_PROFILE_VC1_SIMPLE 0
+#define FF_PROFILE_VC1_MAIN 1
+#define FF_PROFILE_VC1_COMPLEX 2
+#define FF_PROFILE_VC1_ADVANCED 3
- /**
- * YUV colorspace type.
- * - encoding: Set by user
- * - decoding: Set by libavcodec
- */
- enum AVColorSpace colorspace;
+#define FF_PROFILE_MPEG4_SIMPLE 0
+#define FF_PROFILE_MPEG4_SIMPLE_SCALABLE 1
+#define FF_PROFILE_MPEG4_CORE 2
+#define FF_PROFILE_MPEG4_MAIN 3
+#define FF_PROFILE_MPEG4_N_BIT 4
+#define FF_PROFILE_MPEG4_SCALABLE_TEXTURE 5
+#define FF_PROFILE_MPEG4_SIMPLE_FACE_ANIMATION 6
+#define FF_PROFILE_MPEG4_BASIC_ANIMATED_TEXTURE 7
+#define FF_PROFILE_MPEG4_HYBRID 8
+#define FF_PROFILE_MPEG4_ADVANCED_REAL_TIME 9
+#define FF_PROFILE_MPEG4_CORE_SCALABLE 10
+#define FF_PROFILE_MPEG4_ADVANCED_CODING 11
+#define FF_PROFILE_MPEG4_ADVANCED_CORE 12
+#define FF_PROFILE_MPEG4_ADVANCED_SCALABLE_TEXTURE 13
+#define FF_PROFILE_MPEG4_SIMPLE_STUDIO 14
+#define FF_PROFILE_MPEG4_ADVANCED_SIMPLE 15
/**
- * MPEG vs JPEG YUV range.
- * - encoding: Set by user
- * - decoding: Set by libavcodec
+ * level
+ * - encoding: Set by user.
+ * - decoding: Set by libavcodec.
*/
- enum AVColorRange color_range;
+ int level;
+#define FF_LEVEL_UNKNOWN -99
/**
- * This defines the location of chroma samples.
- * - encoding: Set by user
- * - decoding: Set by libavcodec
+ *
+ * - encoding: unused
+ * - decoding: Set by user.
*/
- enum AVChromaLocation chroma_sample_location;
+ enum AVDiscard skip_loop_filter;
/**
- * The codec may call this to execute several independent things.
- * It will return only after finishing all tasks.
- * The user may replace this with some multithreaded implementation,
- * the default implementation will execute the parts serially.
- * Also see avcodec_thread_init and e.g. the --enable-pthread configure option.
- * @param c context passed also to func
- * @param count the number of things to execute
- * @param arg2 argument passed unchanged to func
- * @param ret return values of executed functions, must have space for "count" values. May be NULL.
- * @param func function that will be called count times, with jobnr from 0 to count-1.
- * threadnr will be in the range 0 to c->thread_count-1 < MAX_THREADS and so that no
- * two instances of func executing at the same time will have the same threadnr.
- * @return always 0 currently, but code should handle a future improvement where when any call to func
- * returns < 0 no further calls to func may be done and < 0 is returned.
- * - encoding: Set by libavcodec, user can override.
- * - decoding: Set by libavcodec, user can override.
+ *
+ * - encoding: unused
+ * - decoding: Set by user.
*/
- int (*execute2)(struct AVCodecContext *c, int (*func)(struct AVCodecContext *c2, void *arg, int jobnr, int threadnr), void *arg2, int *ret, int count);
-
- int log_level_offset;
+ enum AVDiscard skip_idct;
/**
- * Number of slices.
- * Indicates number of picture subdivisions. Used for parallelized
- * decoding.
- * - encoding: Set by user
- * - decoding: unused
+ *
+ * - encoding: unused
+ * - decoding: Set by user.
*/
- int slices;
+ enum AVDiscard skip_frame;
/**
* Header containing style information for text subtitles.
uint8_t *subtitle_header;
int subtitle_header_size;
+ /**
+ * Simulates errors in the bitstream to test error concealment.
+ * - encoding: Set by user.
+ * - decoding: unused
+ */
+ int error_rate;
+
/**
* Current packet as passed into the decoder, to avoid having
* to pass the packet into every function. Currently only valid
*/
AVPacket *pkt;
- /**
- * Which multithreading methods to use.
- * Use of FF_THREAD_FRAME will increase decoding delay by one frame per thread,
- * so clients which cannot provide future frames should not use it.
- *
- * - encoding: Set by user, otherwise the default is used.
- * - decoding: Set by user, otherwise the default is used.
- */
- int thread_type;
-#define FF_THREAD_FRAME 1 ///< Decode more than one frame at once
-#define FF_THREAD_SLICE 2 ///< Decode more than one part of a single frame at once
-
- /**
- * Which multithreading methods are in use by the codec.
- * - encoding: Set by libavcodec.
- * - decoding: Set by libavcodec.
- */
- int active_thread_type;
-
- /**
- * Set by the client if its custom get_buffer() callback can be called
- * from another thread, which allows faster multithreaded decoding.
- * draw_horiz_band() will be called from other threads regardless of this setting.
- * Ignored if the default get_buffer() is used.
- * - encoding: Set by user.
- * - decoding: Set by user.
- */
- int thread_safe_callbacks;
-
/**
* VBV delay coded in the last frame (in periods of a 27 MHz clock).
* Used for compliant TS muxing.
uint64_t vbv_delay;
/**
- * Type of service that the audio stream conveys.
- * - encoding: Set by user.
- * - decoding: Set by libavcodec.
- */
- enum AVAudioServiceType audio_service_type;
-
- /**
- * Used to request a sample format from the decoder.
- * - encoding: unused.
- * - decoding: Set by user.
- */
- enum AVSampleFormat request_sample_fmt;
-
- /**
- * Error recognition; may misdetect some more or less valid parts as errors.
+ * Current statistics for PTS correction.
+ * - decoding: maintained and used by libavcodec, not intended to be used by user apps
* - encoding: unused
- * - decoding: Set by user.
- */
- int err_recognition;
-#define AV_EF_CRCCHECK (1<<0)
-#define AV_EF_BITSTREAM (1<<1)
-#define AV_EF_BUFFER (1<<2)
-#define AV_EF_EXPLODE (1<<3)
-
- /**
- * Private context used for internal data.
- *
- * Unlike priv_data, this is not codec-specific. It is used in general
- * libavcodec functions.
- */
- struct AVCodecInternal *internal;
-
- /** Field order
- * - encoding: set by libavcodec
- * - decoding: Set by libavcodec
*/
- enum AVFieldOrder field_order;
+ int64_t pts_correction_num_faulty_pts; /// Number of incorrect PTS values so far
+ int64_t pts_correction_num_faulty_dts; /// Number of incorrect DTS values so far
+ int64_t pts_correction_last_pts; /// PTS of the last frame
+ int64_t pts_correction_last_dts; /// DTS of the last frame
} AVCodecContext;
/**
uint8_t* av_packet_new_side_data(AVPacket *pkt, enum AVPacketSideDataType type,
int size);
+/**
+ * Shrink the already allocated side data buffer
+ *
+ * @param pkt packet
+ * @param type side information type
+ * @param size new side information size
+ * @return 0 on success, < 0 on failure
+ */
+int av_packet_shrink_side_data(AVPacket *pkt, enum AVPacketSideDataType type,
+ int size);
+
/**
* Get side information from packet.
*
uint8_t* av_packet_get_side_data(AVPacket *pkt, enum AVPacketSideDataType type,
int *size);
+int av_packet_merge_side_data(AVPacket *pkt);
+
+int av_packet_split_side_data(AVPacket *pkt);
+
+
/* resample.c */
struct ReSampleContext;
int avpicture_get_size(enum PixelFormat pix_fmt, int width, int height);
void avcodec_get_chroma_sub_sample(enum PixelFormat pix_fmt, int *h_shift, int *v_shift);
+/**
+ * Get the name of a codec.
+ * @return a static string identifying the codec; never NULL
+ */
+const char *avcodec_get_name(enum CodecID id);
+
void avcodec_set_dimensions(AVCodecContext *s, int width, int height);
/**
* @param[in] dst_pix_fmt destination pixel format
* @param[in] src_pix_fmt source pixel format
* @param[in] has_alpha Whether the source pixel format alpha channel is used.
- * @return Combination of flags informing you what kind of losses will occur.
+ * @return Combination of flags informing you what kind of losses will occur
+ * (maximum loss for an invalid dst_pix_fmt).
*/
int avcodec_get_pix_fmt_loss(enum PixelFormat dst_pix_fmt, enum PixelFormat src_pix_fmt,
int has_alpha);
* The pixel formats from which it chooses one, are determined by the
* pix_fmt_mask parameter.
*
+ * Note, only the first 64 pixel formats will fit in pix_fmt_mask.
+ *
* @code
* src_pix_fmt = PIX_FMT_YUV420P;
- * pix_fmt_mask = (1 << PIX_FMT_YUV422P) || (1 << PIX_FMT_RGB24);
+ * pix_fmt_mask = (1 << PIX_FMT_YUV422P) | (1 << PIX_FMT_RGB24);
* dst_pix_fmt = avcodec_find_best_pix_fmt(pix_fmt_mask, src_pix_fmt, alpha, &loss);
* @endcode
*
enum PixelFormat avcodec_find_best_pix_fmt(int64_t pix_fmt_mask, enum PixelFormat src_pix_fmt,
int has_alpha, int *loss_ptr);
+/**
+ * Find the best pixel format to convert to given a certain source pixel
+ * format and a selection of two destination pixel formats. When converting from
+ * one pixel format to another, information loss may occur. For example, when converting
+ * from RGB24 to GRAY, the color information will be lost. Similarly, other losses occur when
+ * converting from some formats to other formats. avcodec_find_best_pix_fmt2() selects which of
+ * the given pixel formats should be used to suffer the least amount of loss.
+ *
+ * If one of the destination formats is PIX_FMT_NONE the other pixel format (if valid) will be
+ * returned.
+ *
+ * @code
+ * src_pix_fmt = PIX_FMT_YUV420P;
+ * dst_pix_fmt1= PIX_FMT_RGB24;
+ * dst_pix_fmt2= PIX_FMT_GRAY8;
+ * dst_pix_fmt3= PIX_FMT_RGB8;
+ * loss= FF_LOSS_CHROMA; // don't care about chroma loss, so chroma loss will be ignored.
+ * dst_pix_fmt = avcodec_find_best_pix_fmt2(dst_pix_fmt1, dst_pix_fmt2, src_pix_fmt, alpha, &loss);
+ * dst_pix_fmt = avcodec_find_best_pix_fmt2(dst_pix_fmt, dst_pix_fmt3, src_pix_fmt, alpha, &loss);
+ * @endcode
+ *
+ * @param[in] dst_pix_fmt1 One of the two destination pixel formats to choose from
+ * @param[in] dst_pix_fmt2 The other of the two destination pixel formats to choose from
+ * @param[in] src_pix_fmt Source pixel format
+ * @param[in] has_alpha Whether the source pixel format alpha channel is used.
+ * @param[in, out] loss_ptr Combination of loss flags. In: selects which of the losses to ignore, i.e.
+ * NULL or value of zero means we care about all losses. Out: the loss
+ * that occurs when converting from src to selected dst pixel format.
+ * @return The best pixel format to convert to or -1 if none was found.
+ */
+enum PixelFormat avcodec_find_best_pix_fmt2(enum PixelFormat dst_pix_fmt1, enum PixelFormat dst_pix_fmt2,
+ enum PixelFormat src_pix_fmt, int has_alpha, int *loss_ptr);
+
+
/* deinterlace a picture */
/* deinterlace - if not supported return -1 */
int avpicture_deinterlace(AVPicture *dst, const AVPicture *src,
*/
const char *av_get_profile_name(const AVCodec *codec, int profile);
+#if FF_API_ALLOC_CONTEXT
+/**
+ * Set the fields of the given AVCodecContext to default values.
+ *
+ * @param s The AVCodecContext of which the fields should be set to default values.
+ * @deprecated use avcodec_get_context_defaults3
+ */
+attribute_deprecated
+void avcodec_get_context_defaults(AVCodecContext *s);
+
+/** THIS FUNCTION IS NOT YET PART OF THE PUBLIC API!
+ * we WILL change its arguments and name a few times! */
+attribute_deprecated
+void avcodec_get_context_defaults2(AVCodecContext *s, enum AVMediaType);
+#endif
+
/**
* Set the fields of the given AVCodecContext to default values corresponding
* to the given codec (defaults may be codec-dependent).
*/
int avcodec_get_context_defaults3(AVCodecContext *s, AVCodec *codec);
+#if FF_API_ALLOC_CONTEXT
+/**
+ * Allocate an AVCodecContext and set its fields to default values. The
+ * resulting struct can be deallocated by simply calling av_free().
+ *
+ * @return An AVCodecContext filled with default values or NULL on failure.
+ * @see avcodec_get_context_defaults
+ *
+ * @deprecated use avcodec_alloc_context3()
+ */
+attribute_deprecated
+AVCodecContext *avcodec_alloc_context(void);
+
+/** THIS FUNCTION IS NOT YET PART OF THE PUBLIC API!
+ * we WILL change its arguments and name a few times! */
+attribute_deprecated
+AVCodecContext *avcodec_alloc_context2(enum AVMediaType);
+#endif
+
/**
* Allocate an AVCodecContext and set its fields to default values. The
* resulting struct can be deallocated by calling avcodec_close() on it followed
int avcodec_default_execute2(AVCodecContext *c, int (*func)(AVCodecContext *c2, void *arg2, int, int),void *arg, int *ret, int count);
//FIXME func typedef
+#if FF_API_AVCODEC_OPEN
+/**
+ * Initialize the AVCodecContext to use the given AVCodec. Prior to using this
+ * function the context has to be allocated.
+ *
+ * The functions avcodec_find_decoder_by_name(), avcodec_find_encoder_by_name(),
+ * avcodec_find_decoder() and avcodec_find_encoder() provide an easy way for
+ * retrieving a codec.
+ *
+ * @warning This function is not thread safe!
+ *
+ * @code
+ * avcodec_register_all();
+ * codec = avcodec_find_decoder(CODEC_ID_H264);
+ * if (!codec)
+ * exit(1);
+ *
+ * context = avcodec_alloc_context3(codec);
+ *
+ * if (avcodec_open(context, codec) < 0)
+ * exit(1);
+ * @endcode
+ *
+ * @param avctx The context which will be set up to use the given codec.
+ * @param codec The codec to use within the context.
+ * @return zero on success, a negative value on error
+ * @see avcodec_alloc_context3, avcodec_find_decoder, avcodec_find_encoder, avcodec_close
+ *
+ * @deprecated use avcodec_open2
+ */
+attribute_deprecated
+int avcodec_open(AVCodecContext *avctx, AVCodec *codec);
+#endif
+
/**
* Initialize the AVCodecContext to use the given AVCodec. Prior to using this
* function the context has to be allocated with avcodec_alloc_context3().
*/
int avcodec_decode_video2(AVCodecContext *avctx, AVFrame *picture,
int *got_picture_ptr,
- AVPacket *avpkt);
+ const AVPacket *avpkt);
/**
* Decode a subtitle message.
* avpkt->data is NULL, the encoder will allocate it.
* The encoder will set avpkt->size to the size of the
* output packet.
+ *
+ * If this function fails or produces no output, avpkt will be
+ * freed using av_free_packet() (i.e. avpkt->destruct will be
+ * called to free the user supplied buffer).
* @param[in] frame AVFrame containing the raw audio data to be encoded.
* May be NULL when flushing an encoder that has the
* CODEC_CAP_DELAY capability set.
* The encoder will set avpkt->size to the size of the
* output packet. The returned data (if any) belongs to the
* caller, he is responsible for freeing it.
+ *
+ * If this function fails or produces no output, avpkt will be
+ * freed using av_free_packet() (i.e. avpkt->destruct will be
+ * called to free the user supplied buffer).
* @param[in] frame AVFrame containing the raw video data to be encoded.
* May be NULL when flushing an encoder that has the
* CODEC_CAP_DELAY capability set.
*/
int av_get_bits_per_sample(enum CodecID codec_id);
+/**
+ * Return the PCM codec associated with a sample format.
+ * @param be endianness, 0 for little, 1 for big,
+ * -1 (or anything else) for native
+ * @return CODEC_ID_PCM_* or CODEC_ID_NONE
+ */
+enum CodecID av_get_pcm_codec(enum AVSampleFormat fmt, int be);
+
+/**
+ * Return codec bits per sample.
+ * Only return non-zero if the bits per sample is exactly correct, not an
+ * approximation.
+ *
+ * @param[in] codec_id the codec
+ * @return Number of bits per sample or zero if unknown for the given codec.
+ */
+int av_get_exact_bits_per_sample(enum CodecID codec_id);
+
+/**
+ * Return audio frame duration.
+ *
+ * @param avctx codec context
+ * @param frame_bytes size of the frame, or 0 if unknown
+ * @return frame duration, in samples, if known. 0 if not able to
+ * determine.
+ */
+int av_get_audio_frame_duration(AVCodecContext *avctx, int frame_bytes);
+
/* frame parsing */
typedef struct AVCodecParserContext {
void *priv_data;
void av_fast_malloc(void *ptr, unsigned int *size, size_t min_size);
/**
- * Allocate a buffer with padding, reusing the given one if large enough.
- *
* Same behaviour av_fast_malloc but the buffer has additional
- * FF_INPUT_PADDING_SIZE at the end which will always memset to 0.
+ * FF_INPUT_PADDING_SIZE at the end which will will always be 0.
*
+ * In addition the whole buffer will initially and after resizes
+ * be 0-initialized so that no uninitialized data will ever appear.
*/
void av_fast_padded_malloc(void *ptr, unsigned int *size, size_t min_size);
/**
* Log a generic warning message about a missing feature. This function is
- * intended to be used internally by Libav (libavcodec, libavformat, etc.)
+ * intended to be used internally by FFmpeg (libavcodec, libavformat, etc.)
* only, and would normally not be used by applications.
* @param[in] avc a pointer to an arbitrary struct of which the first field is
* a pointer to an AVClass struct
/**
* Log a generic warning message asking for a sample. This function is
- * intended to be used internally by Libav (libavcodec, libavformat, etc.)
+ * intended to be used internally by FFmpeg (libavcodec, libavformat, etc.)
* only, and would normally not be used by applications.
* @param[in] avc a pointer to an arbitrary struct of which the first field is
* a pointer to an AVClass struct
* lockmgr should store/get a pointer to a user allocated mutex. It's
* NULL upon AV_LOCK_CREATE and != NULL for all other ops.
*
- * @param cb User defined callback. Note: Libav may invoke calls to this
+ * @param cb User defined callback. Note: FFmpeg may invoke calls to this
* callback during the call to av_lockmgr_register().
* Thus, the application must be prepared to handle that.
* If cb is set to NULL the lockmgr will be unregistered.
*/
const AVClass *avcodec_get_class(void);
+/**
+ * Get the AVClass for AVFrame. It can be used in combination with
+ * AV_OPT_SEARCH_FAKE_OBJ for examining options.
+ *
+ * @see av_opt_find().
+ */
+const AVClass *avcodec_get_frame_class(void);
+
/**
* @return a positive value if s is open (i.e. avcodec_open2() was called on it
* with no corresponding avcodec_close()), 0 otherwise.
*/
int avcodec_is_open(AVCodecContext *s);
+/**
+ * @return a non-zero number if codec is an encoder, zero otherwise
+ */
+int av_codec_is_encoder(AVCodec *codec);
+
+/**
+ * @return a non-zero number if codec is a decoder, zero otherwise
+ */
+int av_codec_is_decoder(AVCodec *codec);
+
#endif /* AVCODEC_AVCODEC_H */
projects / ffmpeg / blobdiff