* dct_unquantize_h263_altivec:
* Copyright (c) 2003 Romain Dolbeau <romain@dolbeau.org>
*
- * This file is part of FFmpeg.
+ * This file is part of Libav.
*
- * FFmpeg is free software; you can redistribute it and/or
+ * Libav is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
- * FFmpeg is distributed in the hope that it will be useful,
+ * Libav is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
- * License along with FFmpeg; if not, write to the Free Software
+ * License along with Libav; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <stdlib.h>
#include <stdio.h>
+
+#include "libavutil/cpu.h"
+#include "libavutil/ppc/types_altivec.h"
+#include "libavutil/ppc/util_altivec.h"
#include "libavcodec/dsputil.h"
#include "libavcodec/mpegvideo.h"
-#include "gcc_fixes.h"
-
-#include "dsputil_ppc.h"
-#include "util_altivec.h"
-// Swaps two variables (used for altivec registers)
-#define SWAP(a,b) \
-do { \
- __typeof__(a) swap_temp=a; \
- a=b; \
- b=swap_temp; \
-} while (0)
-
-// transposes a matrix consisting of four vectors with four elements each
-#define TRANSPOSE4(a,b,c,d) \
-do { \
- __typeof__(a) _trans_ach = vec_mergeh(a, c); \
- __typeof__(a) _trans_acl = vec_mergel(a, c); \
- __typeof__(a) _trans_bdh = vec_mergeh(b, d); \
- __typeof__(a) _trans_bdl = vec_mergel(b, d); \
- \
- a = vec_mergeh(_trans_ach, _trans_bdh); \
- b = vec_mergel(_trans_ach, _trans_bdh); \
- c = vec_mergeh(_trans_acl, _trans_bdl); \
- d = vec_mergel(_trans_acl, _trans_bdl); \
-} while (0)
-
-
-// Loads a four-byte value (int or float) from the target address
-// into every element in the target vector. Only works if the
-// target address is four-byte aligned (which should be always).
-#define LOAD4(vec, address) \
-{ \
- __typeof__(vec)* _load_addr = (__typeof__(vec)*)(address); \
- vector unsigned char _perm_vec = vec_lvsl(0,(address)); \
- vec = vec_ld(0, _load_addr); \
- vec = vec_perm(vec, vec, _perm_vec); \
- vec = vec_splat(vec, 0); \
-}
-
-
-#define FOUROF(a) {a,a,a,a}
-
-int dct_quantize_altivec(MpegEncContext* s,
- DCTELEM* data, int n,
- int qscale, int* overflow)
-{
- int lastNonZero;
- vector float row0, row1, row2, row3, row4, row5, row6, row7;
- vector float alt0, alt1, alt2, alt3, alt4, alt5, alt6, alt7;
- const vector float zero = (const vector float)FOUROF(0.);
- // used after quantize step
- int oldBaseValue = 0;
-
- // Load the data into the row/alt vectors
- {
- vector signed short data0, data1, data2, data3, data4, data5, data6, data7;
-
- data0 = vec_ld(0, data);
- data1 = vec_ld(16, data);
- data2 = vec_ld(32, data);
- data3 = vec_ld(48, data);
- data4 = vec_ld(64, data);
- data5 = vec_ld(80, data);
- data6 = vec_ld(96, data);
- data7 = vec_ld(112, data);
-
- // Transpose the data before we start
- TRANSPOSE8(data0, data1, data2, data3, data4, data5, data6, data7);
-
- // load the data into floating point vectors. We load
- // the high half of each row into the main row vectors
- // and the low half into the alt vectors.
- row0 = vec_ctf(vec_unpackh(data0), 0);
- alt0 = vec_ctf(vec_unpackl(data0), 0);
- row1 = vec_ctf(vec_unpackh(data1), 0);
- alt1 = vec_ctf(vec_unpackl(data1), 0);
- row2 = vec_ctf(vec_unpackh(data2), 0);
- alt2 = vec_ctf(vec_unpackl(data2), 0);
- row3 = vec_ctf(vec_unpackh(data3), 0);
- alt3 = vec_ctf(vec_unpackl(data3), 0);
- row4 = vec_ctf(vec_unpackh(data4), 0);
- alt4 = vec_ctf(vec_unpackl(data4), 0);
- row5 = vec_ctf(vec_unpackh(data5), 0);
- alt5 = vec_ctf(vec_unpackl(data5), 0);
- row6 = vec_ctf(vec_unpackh(data6), 0);
- alt6 = vec_ctf(vec_unpackl(data6), 0);
- row7 = vec_ctf(vec_unpackh(data7), 0);
- alt7 = vec_ctf(vec_unpackl(data7), 0);
- }
-
- // The following block could exist as a separate an altivec dct
- // function. However, if we put it inline, the DCT data can remain
- // in the vector local variables, as floats, which we'll use during the
- // quantize step...
- {
- const vector float vec_0_298631336 = (vector float)FOUROF(0.298631336f);
- const vector float vec_0_390180644 = (vector float)FOUROF(-0.390180644f);
- const vector float vec_0_541196100 = (vector float)FOUROF(0.541196100f);
- const vector float vec_0_765366865 = (vector float)FOUROF(0.765366865f);
- const vector float vec_0_899976223 = (vector float)FOUROF(-0.899976223f);
- const vector float vec_1_175875602 = (vector float)FOUROF(1.175875602f);
- const vector float vec_1_501321110 = (vector float)FOUROF(1.501321110f);
- const vector float vec_1_847759065 = (vector float)FOUROF(-1.847759065f);
- const vector float vec_1_961570560 = (vector float)FOUROF(-1.961570560f);
- const vector float vec_2_053119869 = (vector float)FOUROF(2.053119869f);
- const vector float vec_2_562915447 = (vector float)FOUROF(-2.562915447f);
- const vector float vec_3_072711026 = (vector float)FOUROF(3.072711026f);
-
-
- int whichPass, whichHalf;
-
- for(whichPass = 1; whichPass<=2; whichPass++) {
- for(whichHalf = 1; whichHalf<=2; whichHalf++) {
- vector float tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6, tmp7;
- vector float tmp10, tmp11, tmp12, tmp13;
- vector float z1, z2, z3, z4, z5;
-
- tmp0 = vec_add(row0, row7); // tmp0 = dataptr[0] + dataptr[7];
- tmp7 = vec_sub(row0, row7); // tmp7 = dataptr[0] - dataptr[7];
- tmp3 = vec_add(row3, row4); // tmp3 = dataptr[3] + dataptr[4];
- tmp4 = vec_sub(row3, row4); // tmp4 = dataptr[3] - dataptr[4];
- tmp1 = vec_add(row1, row6); // tmp1 = dataptr[1] + dataptr[6];
- tmp6 = vec_sub(row1, row6); // tmp6 = dataptr[1] - dataptr[6];
- tmp2 = vec_add(row2, row5); // tmp2 = dataptr[2] + dataptr[5];
- tmp5 = vec_sub(row2, row5); // tmp5 = dataptr[2] - dataptr[5];
-
- tmp10 = vec_add(tmp0, tmp3); // tmp10 = tmp0 + tmp3;
- tmp13 = vec_sub(tmp0, tmp3); // tmp13 = tmp0 - tmp3;
- tmp11 = vec_add(tmp1, tmp2); // tmp11 = tmp1 + tmp2;
- tmp12 = vec_sub(tmp1, tmp2); // tmp12 = tmp1 - tmp2;
-
-
- // dataptr[0] = (DCTELEM) ((tmp10 + tmp11) << PASS1_BITS);
- row0 = vec_add(tmp10, tmp11);
-
- // dataptr[4] = (DCTELEM) ((tmp10 - tmp11) << PASS1_BITS);
- row4 = vec_sub(tmp10, tmp11);
-
-
- // z1 = MULTIPLY(tmp12 + tmp13, FIX_0_541196100);
- z1 = vec_madd(vec_add(tmp12, tmp13), vec_0_541196100, (vector float)zero);
-
- // dataptr[2] = (DCTELEM) DESCALE(z1 + MULTIPLY(tmp13, FIX_0_765366865),
- // CONST_BITS-PASS1_BITS);
- row2 = vec_madd(tmp13, vec_0_765366865, z1);
-
- // dataptr[6] = (DCTELEM) DESCALE(z1 + MULTIPLY(tmp12, - FIX_1_847759065),
- // CONST_BITS-PASS1_BITS);
- row6 = vec_madd(tmp12, vec_1_847759065, z1);
-
- z1 = vec_add(tmp4, tmp7); // z1 = tmp4 + tmp7;
- z2 = vec_add(tmp5, tmp6); // z2 = tmp5 + tmp6;
- z3 = vec_add(tmp4, tmp6); // z3 = tmp4 + tmp6;
- z4 = vec_add(tmp5, tmp7); // z4 = tmp5 + tmp7;
-
- // z5 = MULTIPLY(z3 + z4, FIX_1_175875602); /* sqrt(2) * c3 */
- z5 = vec_madd(vec_add(z3, z4), vec_1_175875602, (vector float)zero);
-
- // z3 = MULTIPLY(z3, - FIX_1_961570560); /* sqrt(2) * (-c3-c5) */
- z3 = vec_madd(z3, vec_1_961570560, z5);
-
- // z4 = MULTIPLY(z4, - FIX_0_390180644); /* sqrt(2) * (c5-c3) */
- z4 = vec_madd(z4, vec_0_390180644, z5);
-
- // The following adds are rolled into the multiplies above
- // z3 = vec_add(z3, z5); // z3 += z5;
- // z4 = vec_add(z4, z5); // z4 += z5;
-
- // z2 = MULTIPLY(z2, - FIX_2_562915447); /* sqrt(2) * (-c1-c3) */
- // Wow! It's actually more efficient to roll this multiply
- // into the adds below, even thought the multiply gets done twice!
- // z2 = vec_madd(z2, vec_2_562915447, (vector float)zero);
-
- // z1 = MULTIPLY(z1, - FIX_0_899976223); /* sqrt(2) * (c7-c3) */
- // Same with this one...
- // z1 = vec_madd(z1, vec_0_899976223, (vector float)zero);
-
- // tmp4 = MULTIPLY(tmp4, FIX_0_298631336); /* sqrt(2) * (-c1+c3+c5-c7) */
- // dataptr[7] = (DCTELEM) DESCALE(tmp4 + z1 + z3, CONST_BITS-PASS1_BITS);
- row7 = vec_madd(tmp4, vec_0_298631336, vec_madd(z1, vec_0_899976223, z3));
-
- // tmp5 = MULTIPLY(tmp5, FIX_2_053119869); /* sqrt(2) * ( c1+c3-c5+c7) */
- // dataptr[5] = (DCTELEM) DESCALE(tmp5 + z2 + z4, CONST_BITS-PASS1_BITS);
- row5 = vec_madd(tmp5, vec_2_053119869, vec_madd(z2, vec_2_562915447, z4));
-
- // tmp6 = MULTIPLY(tmp6, FIX_3_072711026); /* sqrt(2) * ( c1+c3+c5-c7) */
- // dataptr[3] = (DCTELEM) DESCALE(tmp6 + z2 + z3, CONST_BITS-PASS1_BITS);
- row3 = vec_madd(tmp6, vec_3_072711026, vec_madd(z2, vec_2_562915447, z3));
-
- // tmp7 = MULTIPLY(tmp7, FIX_1_501321110); /* sqrt(2) * ( c1+c3-c5-c7) */
- // dataptr[1] = (DCTELEM) DESCALE(tmp7 + z1 + z4, CONST_BITS-PASS1_BITS);
- row1 = vec_madd(z1, vec_0_899976223, vec_madd(tmp7, vec_1_501321110, z4));
-
- // Swap the row values with the alts. If this is the first half,
- // this sets up the low values to be acted on in the second half.
- // If this is the second half, it puts the high values back in
- // the row values where they are expected to be when we're done.
- SWAP(row0, alt0);
- SWAP(row1, alt1);
- SWAP(row2, alt2);
- SWAP(row3, alt3);
- SWAP(row4, alt4);
- SWAP(row5, alt5);
- SWAP(row6, alt6);
- SWAP(row7, alt7);
- }
-
- if (whichPass == 1) {
- // transpose the data for the second pass
-
- // First, block transpose the upper right with lower left.
- SWAP(row4, alt0);
- SWAP(row5, alt1);
- SWAP(row6, alt2);
- SWAP(row7, alt3);
-
- // Now, transpose each block of four
- TRANSPOSE4(row0, row1, row2, row3);
- TRANSPOSE4(row4, row5, row6, row7);
- TRANSPOSE4(alt0, alt1, alt2, alt3);
- TRANSPOSE4(alt4, alt5, alt6, alt7);
- }
- }
- }
-
- // perform the quantize step, using the floating point data
- // still in the row/alt registers
- {
- const int* biasAddr;
- const vector signed int* qmat;
- vector float bias, negBias;
-
- if (s->mb_intra) {
- vector signed int baseVector;
-
- // We must cache element 0 in the intra case
- // (it needs special handling).
- baseVector = vec_cts(vec_splat(row0, 0), 0);
- vec_ste(baseVector, 0, &oldBaseValue);
-
- qmat = (vector signed int*)s->q_intra_matrix[qscale];
- biasAddr = &(s->intra_quant_bias);
- } else {
- qmat = (vector signed int*)s->q_inter_matrix[qscale];
- biasAddr = &(s->inter_quant_bias);
- }
-
- // Load the bias vector (We add 0.5 to the bias so that we're
- // rounding when we convert to int, instead of flooring.)
- {
- vector signed int biasInt;
- const vector float negOneFloat = (vector float)FOUROF(-1.0f);
- LOAD4(biasInt, biasAddr);
- bias = vec_ctf(biasInt, QUANT_BIAS_SHIFT);
- negBias = vec_madd(bias, negOneFloat, zero);
- }
-
- {
- vector float q0, q1, q2, q3, q4, q5, q6, q7;
-
- q0 = vec_ctf(qmat[0], QMAT_SHIFT);
- q1 = vec_ctf(qmat[2], QMAT_SHIFT);
- q2 = vec_ctf(qmat[4], QMAT_SHIFT);
- q3 = vec_ctf(qmat[6], QMAT_SHIFT);
- q4 = vec_ctf(qmat[8], QMAT_SHIFT);
- q5 = vec_ctf(qmat[10], QMAT_SHIFT);
- q6 = vec_ctf(qmat[12], QMAT_SHIFT);
- q7 = vec_ctf(qmat[14], QMAT_SHIFT);
-
- row0 = vec_sel(vec_madd(row0, q0, negBias), vec_madd(row0, q0, bias),
- vec_cmpgt(row0, zero));
- row1 = vec_sel(vec_madd(row1, q1, negBias), vec_madd(row1, q1, bias),
- vec_cmpgt(row1, zero));
- row2 = vec_sel(vec_madd(row2, q2, negBias), vec_madd(row2, q2, bias),
- vec_cmpgt(row2, zero));
- row3 = vec_sel(vec_madd(row3, q3, negBias), vec_madd(row3, q3, bias),
- vec_cmpgt(row3, zero));
- row4 = vec_sel(vec_madd(row4, q4, negBias), vec_madd(row4, q4, bias),
- vec_cmpgt(row4, zero));
- row5 = vec_sel(vec_madd(row5, q5, negBias), vec_madd(row5, q5, bias),
- vec_cmpgt(row5, zero));
- row6 = vec_sel(vec_madd(row6, q6, negBias), vec_madd(row6, q6, bias),
- vec_cmpgt(row6, zero));
- row7 = vec_sel(vec_madd(row7, q7, negBias), vec_madd(row7, q7, bias),
- vec_cmpgt(row7, zero));
-
- q0 = vec_ctf(qmat[1], QMAT_SHIFT);
- q1 = vec_ctf(qmat[3], QMAT_SHIFT);
- q2 = vec_ctf(qmat[5], QMAT_SHIFT);
- q3 = vec_ctf(qmat[7], QMAT_SHIFT);
- q4 = vec_ctf(qmat[9], QMAT_SHIFT);
- q5 = vec_ctf(qmat[11], QMAT_SHIFT);
- q6 = vec_ctf(qmat[13], QMAT_SHIFT);
- q7 = vec_ctf(qmat[15], QMAT_SHIFT);
-
- alt0 = vec_sel(vec_madd(alt0, q0, negBias), vec_madd(alt0, q0, bias),
- vec_cmpgt(alt0, zero));
- alt1 = vec_sel(vec_madd(alt1, q1, negBias), vec_madd(alt1, q1, bias),
- vec_cmpgt(alt1, zero));
- alt2 = vec_sel(vec_madd(alt2, q2, negBias), vec_madd(alt2, q2, bias),
- vec_cmpgt(alt2, zero));
- alt3 = vec_sel(vec_madd(alt3, q3, negBias), vec_madd(alt3, q3, bias),
- vec_cmpgt(alt3, zero));
- alt4 = vec_sel(vec_madd(alt4, q4, negBias), vec_madd(alt4, q4, bias),
- vec_cmpgt(alt4, zero));
- alt5 = vec_sel(vec_madd(alt5, q5, negBias), vec_madd(alt5, q5, bias),
- vec_cmpgt(alt5, zero));
- alt6 = vec_sel(vec_madd(alt6, q6, negBias), vec_madd(alt6, q6, bias),
- vec_cmpgt(alt6, zero));
- alt7 = vec_sel(vec_madd(alt7, q7, negBias), vec_madd(alt7, q7, bias),
- vec_cmpgt(alt7, zero));
- }
-
-
- }
-
- // Store the data back into the original block
- {
- vector signed short data0, data1, data2, data3, data4, data5, data6, data7;
-
- data0 = vec_pack(vec_cts(row0, 0), vec_cts(alt0, 0));
- data1 = vec_pack(vec_cts(row1, 0), vec_cts(alt1, 0));
- data2 = vec_pack(vec_cts(row2, 0), vec_cts(alt2, 0));
- data3 = vec_pack(vec_cts(row3, 0), vec_cts(alt3, 0));
- data4 = vec_pack(vec_cts(row4, 0), vec_cts(alt4, 0));
- data5 = vec_pack(vec_cts(row5, 0), vec_cts(alt5, 0));
- data6 = vec_pack(vec_cts(row6, 0), vec_cts(alt6, 0));
- data7 = vec_pack(vec_cts(row7, 0), vec_cts(alt7, 0));
-
- {
- // Clamp for overflow
- vector signed int max_q_int, min_q_int;
- vector signed short max_q, min_q;
-
- LOAD4(max_q_int, &(s->max_qcoeff));
- LOAD4(min_q_int, &(s->min_qcoeff));
-
- max_q = vec_pack(max_q_int, max_q_int);
- min_q = vec_pack(min_q_int, min_q_int);
-
- data0 = vec_max(vec_min(data0, max_q), min_q);
- data1 = vec_max(vec_min(data1, max_q), min_q);
- data2 = vec_max(vec_min(data2, max_q), min_q);
- data4 = vec_max(vec_min(data4, max_q), min_q);
- data5 = vec_max(vec_min(data5, max_q), min_q);
- data6 = vec_max(vec_min(data6, max_q), min_q);
- data7 = vec_max(vec_min(data7, max_q), min_q);
- }
-
- {
- vector bool char zero_01, zero_23, zero_45, zero_67;
- vector signed char scanIndexes_01, scanIndexes_23, scanIndexes_45, scanIndexes_67;
- vector signed char negOne = vec_splat_s8(-1);
- vector signed char* scanPtr =
- (vector signed char*)(s->intra_scantable.inverse);
- signed char lastNonZeroChar;
-
- // Determine the largest non-zero index.
- zero_01 = vec_pack(vec_cmpeq(data0, (vector signed short)zero),
- vec_cmpeq(data1, (vector signed short)zero));
- zero_23 = vec_pack(vec_cmpeq(data2, (vector signed short)zero),
- vec_cmpeq(data3, (vector signed short)zero));
- zero_45 = vec_pack(vec_cmpeq(data4, (vector signed short)zero),
- vec_cmpeq(data5, (vector signed short)zero));
- zero_67 = vec_pack(vec_cmpeq(data6, (vector signed short)zero),
- vec_cmpeq(data7, (vector signed short)zero));
-
- // 64 biggest values
- scanIndexes_01 = vec_sel(scanPtr[0], negOne, zero_01);
- scanIndexes_23 = vec_sel(scanPtr[1], negOne, zero_23);
- scanIndexes_45 = vec_sel(scanPtr[2], negOne, zero_45);
- scanIndexes_67 = vec_sel(scanPtr[3], negOne, zero_67);
-
- // 32 largest values
- scanIndexes_01 = vec_max(scanIndexes_01, scanIndexes_23);
- scanIndexes_45 = vec_max(scanIndexes_45, scanIndexes_67);
-
- // 16 largest values
- scanIndexes_01 = vec_max(scanIndexes_01, scanIndexes_45);
-
- // 8 largest values
- scanIndexes_01 = vec_max(vec_mergeh(scanIndexes_01, negOne),
- vec_mergel(scanIndexes_01, negOne));
-
- // 4 largest values
- scanIndexes_01 = vec_max(vec_mergeh(scanIndexes_01, negOne),
- vec_mergel(scanIndexes_01, negOne));
-
- // 2 largest values
- scanIndexes_01 = vec_max(vec_mergeh(scanIndexes_01, negOne),
- vec_mergel(scanIndexes_01, negOne));
-
- // largest value
- scanIndexes_01 = vec_max(vec_mergeh(scanIndexes_01, negOne),
- vec_mergel(scanIndexes_01, negOne));
-
- scanIndexes_01 = vec_splat(scanIndexes_01, 0);
-
-
- vec_ste(scanIndexes_01, 0, &lastNonZeroChar);
-
- lastNonZero = lastNonZeroChar;
-
- // While the data is still in vectors we check for the transpose IDCT permute
- // and handle it using the vector unit if we can. This is the permute used
- // by the altivec idct, so it is common when using the altivec dct.
-
- if ((lastNonZero > 0) && (s->dsp.idct_permutation_type == FF_TRANSPOSE_IDCT_PERM)) {
- TRANSPOSE8(data0, data1, data2, data3, data4, data5, data6, data7);
- }
-
- vec_st(data0, 0, data);
- vec_st(data1, 16, data);
- vec_st(data2, 32, data);
- vec_st(data3, 48, data);
- vec_st(data4, 64, data);
- vec_st(data5, 80, data);
- vec_st(data6, 96, data);
- vec_st(data7, 112, data);
- }
- }
-
- // special handling of block[0]
- if (s->mb_intra) {
- if (!s->h263_aic) {
- if (n < 4)
- oldBaseValue /= s->y_dc_scale;
- else
- oldBaseValue /= s->c_dc_scale;
- }
-
- // Divide by 8, rounding the result
- data[0] = (oldBaseValue + 4) >> 3;
- }
-
- // We handled the transpose permutation above and we don't
- // need to permute the "no" permutation case.
- if ((lastNonZero > 0) &&
- (s->dsp.idct_permutation_type != FF_TRANSPOSE_IDCT_PERM) &&
- (s->dsp.idct_permutation_type != FF_NO_IDCT_PERM)) {
- ff_block_permute(data, s->dsp.idct_permutation,
- s->intra_scantable.scantable, lastNonZero);
- }
-
- return lastNonZero;
-}
+#include "dsputil_altivec.h"
/* AltiVec version of dct_unquantize_h263
this code assumes `block' is 16 bytes-aligned */
-void dct_unquantize_h263_altivec(MpegEncContext *s,
+static void dct_unquantize_h263_altivec(MpegEncContext *s,
DCTELEM *block, int n, int qscale)
{
-POWERPC_PERF_DECLARE(altivec_dct_unquantize_h263_num, 1);
int i, level, qmul, qadd;
int nCoeffs;
assert(s->block_last_index[n]>=0);
-POWERPC_PERF_START_COUNT(altivec_dct_unquantize_h263_num, 1);
-
qadd = (qscale - 1) | 1;
qmul = qscale << 1;
{
register const vector signed short vczero = (const vector signed short)vec_splat_s16(0);
- DECLARE_ALIGNED_16(short, qmul8[]) =
- {
- qmul, qmul, qmul, qmul,
- qmul, qmul, qmul, qmul
- };
- DECLARE_ALIGNED_16(short, qadd8[]) =
- {
- qadd, qadd, qadd, qadd,
- qadd, qadd, qadd, qadd
- };
- DECLARE_ALIGNED_16(short, nqadd8[]) =
- {
- -qadd, -qadd, -qadd, -qadd,
- -qadd, -qadd, -qadd, -qadd
- };
+ DECLARE_ALIGNED(16, short, qmul8) = qmul;
+ DECLARE_ALIGNED(16, short, qadd8) = qadd;
register vector signed short blockv, qmulv, qaddv, nqaddv, temp1;
register vector bool short blockv_null, blockv_neg;
register short backup_0 = block[0];
register int j = 0;
- qmulv = vec_ld(0, qmul8);
- qaddv = vec_ld(0, qadd8);
- nqaddv = vec_ld(0, nqadd8);
-
-#if 0 // block *is* 16 bytes-aligned, it seems.
- // first make sure block[j] is 16 bytes-aligned
- for(j = 0; (j <= nCoeffs) && ((((unsigned long)block) + (j << 1)) & 0x0000000F) ; j++) {
- level = block[j];
- if (level) {
- if (level < 0) {
- level = level * qmul - qadd;
- } else {
- level = level * qmul + qadd;
- }
- block[j] = level;
- }
- }
-#endif
+ qmulv = vec_splat((vec_s16)vec_lde(0, &qmul8), 0);
+ qaddv = vec_splat((vec_s16)vec_lde(0, &qadd8), 0);
+ nqaddv = vec_sub(vczero, qaddv);
// vectorize all the 16 bytes-aligned blocks
// of 8 elements
block[0] = backup_0;
}
}
-POWERPC_PERF_STOP_COUNT(altivec_dct_unquantize_h263_num, nCoeffs == 63);
}
-extern void idct_put_altivec(uint8_t *dest, int line_size, int16_t *block);
-extern void idct_add_altivec(uint8_t *dest, int line_size, int16_t *block);
-
-void MPV_common_init_altivec(MpegEncContext *s)
+void ff_MPV_common_init_altivec(MpegEncContext *s)
{
- if ((mm_flags & MM_ALTIVEC) == 0) return;
-
- if (s->avctx->lowres==0) {
- if ((s->avctx->idct_algo == FF_IDCT_AUTO) ||
- (s->avctx->idct_algo == FF_IDCT_ALTIVEC)) {
- s->dsp.idct_put = idct_put_altivec;
- s->dsp.idct_add = idct_add_altivec;
- s->dsp.idct_permutation_type = FF_TRANSPOSE_IDCT_PERM;
- }
- }
-
- // Test to make sure that the dct required alignments are met.
- if ((((long)(s->q_intra_matrix) & 0x0f) != 0) ||
- (((long)(s->q_inter_matrix) & 0x0f) != 0)) {
- av_log(s->avctx, AV_LOG_INFO, "Internal Error: q-matrix blocks must be 16-byte aligned "
- "to use AltiVec DCT. Reverting to non-AltiVec version.\n");
- return;
- }
-
- if (((long)(s->intra_scantable.inverse) & 0x0f) != 0) {
- av_log(s->avctx, AV_LOG_INFO, "Internal Error: scan table blocks must be 16-byte aligned "
- "to use AltiVec DCT. Reverting to non-AltiVec version.\n");
- return;
- }
-
+ if (!(av_get_cpu_flags() & AV_CPU_FLAG_ALTIVEC)) return;
if ((s->avctx->dct_algo == FF_DCT_AUTO) ||
(s->avctx->dct_algo == FF_DCT_ALTIVEC)) {
-#if 0 /* seems to cause trouble under some circumstances */
- s->dct_quantize = dct_quantize_altivec;
-#endif
s->dct_unquantize_h263_intra = dct_unquantize_h263_altivec;
s->dct_unquantize_h263_inter = dct_unquantize_h263_altivec;
}
projects / ffmpeg / blobdiff