%macro EMU_EDGE_FUNC 0
%if ARCH_X86_64
-%define w_reg r10
-cglobal emu_edge_core, 6, 7, 1
- mov r11, r5 ; save block_h
+%define w_reg r7
+cglobal emu_edge_core, 6, 9, 1
+ mov r8, r5 ; save block_h
%else
%define w_reg r6
cglobal emu_edge_core, 2, 7, 0
sub r0, w_reg
%if ARCH_X86_64
mov r3, r0 ; backup of buf+block_h*linesize
- mov r5, r11
+ mov r5, r8
%else
mov r0m, r0 ; backup of buf+block_h*linesize
mov r5, r5m
; FIXME we can do a if size == 1 here if that makes any speed difference, test me
sar w_reg, 1
sal w_reg, 6
- ; r0=buf+block_h*linesize,r10(64)/r6(32)=start_x offset for funcs
+ ; r0=buf+block_h*linesize,r7(64)/r6(32)=start_x offset for funcs
; r6(rax)/r3(ebx)=val,r2=linesize,r1=start_x,r5=block_h
%ifdef PIC
lea rax, [.emuedge_extend_left_2]
%endif
call w_reg
- ; now r3(64)/r0(32)=buf,r2=linesize,r11/r5=block_h,r6/r3=val, r10/r6=end_x, r1=block_w
+ ; now r3(64)/r0(32)=buf,r2=linesize,r8/r5=block_h,r6/r3=val, r7/r6=end_x, r1=block_w
.right_extend:
%if ARCH_X86_32
mov r0, r0m
%define vall al
%define valh ah
%define valw ax
-%define valw2 r10w
+%define valw2 r7w
%define valw3 r3w
%if WIN64
-%define valw4 r4w
+%define valw4 r7w
%else ; unix64
%define valw4 r3w
%endif
; - else if (%2 & 8) fills 8 bytes into mm0
; - if (%2 & 7 == 4) fills the last 4 bytes into rax
; - else if (%2 & 4) fills 4 bytes into mm0-1
-; - if (%2 & 3 == 3) fills 2 bytes into r10/r3, and 1 into eax
+; - if (%2 & 3 == 3) fills 2 bytes into r7/r3, and 1 into eax
; (note that we're using r3 for body/bottom because it's a shorter
; opcode, and then the loop fits in 128 bytes)
; - else fills remaining bytes into rax
%endrep
%endmacro ; LEFT_EXTEND
-; r3/r0=buf+block_h*linesize, r2=linesize, r11/r5=block_h, r0/r6=end_x, r6/r3=val
+; r3/r0=buf+block_h*linesize, r2=linesize, r8/r5=block_h, r0/r6=end_x, r6/r3=val
%macro RIGHT_EXTEND 0
%assign %%n 2
%rep 11
sub r3, r2 ; dst -= linesize
READ_V_PIXEL %%n, [r3+w_reg-1] ; read pixels
WRITE_V_PIXEL %%n, r3+r4-%%n ; write pixels
- dec r11
+ dec r8
%else ; ARCH_X86_32
sub r0, r2 ; dst -= linesize
READ_V_PIXEL %%n, [r0+w_reg-1] ; read pixels
%macro SLOW_V_EXTEND 0
.slow_v_extend_loop:
; r0=buf,r1=src,r2(64)/r2m(32)=linesize,r3(64)/r3m(32)=start_x,r4=end_y,r5=block_h
-; r11(64)/r3(later-64)/r2(32)=cnt_reg,r6(64)/r3(32)=val_reg,r10(64)/r6(32)=w=end_x-start_x
+; r8(64)/r3(later-64)/r2(32)=cnt_reg,r6(64)/r3(32)=val_reg,r7(64)/r6(32)=w=end_x-start_x
%if ARCH_X86_64
- push r11 ; save old value of block_h
+ push r8 ; save old value of block_h
test r3, r3
-%define cnt_reg r11
+%define cnt_reg r8
jz .do_body_copy ; if (!start_y) goto do_body_copy
V_COPY_ROW top, r3
%else
V_COPY_ROW body, r4
%if ARCH_X86_64
- pop r11 ; restore old value of block_h
+ pop r8 ; restore old value of block_h
%define cnt_reg r3
%endif
test r5, r5
%macro SLOW_LEFT_EXTEND 0
.slow_left_extend_loop:
-; r0=buf+block_h*linesize,r2=linesize,r6(64)/r3(32)=val,r5=block_h,r4=cntr,r10/r6=start_x
+; r0=buf+block_h*linesize,r2=linesize,r6(64)/r3(32)=val,r5=block_h,r4=cntr,r7/r6=start_x
mov r4, 8
sub r0, linesize
READ_V_PIXEL 8, [r0+w_reg]
%macro SLOW_RIGHT_EXTEND 0
.slow_right_extend_loop:
-; r3(64)/r0(32)=buf+block_h*linesize,r2=linesize,r4=block_w,r11(64)/r5(32)=block_h,
-; r10(64)/r6(32)=end_x,r6/r3=val,r1=cntr
+; r3(64)/r0(32)=buf+block_h*linesize,r2=linesize,r4=block_w,r8(64)/r5(32)=block_h,
+; r7(64)/r6(32)=end_x,r6/r3=val,r1=cntr
%if ARCH_X86_64
%define buf_reg r3
-%define bh_reg r11
+%define bh_reg r8
%else
%define buf_reg r0
%define bh_reg r5
VECTOR_CLIP_INT32 6, 1, 0, 0
%endif
+;-----------------------------------------------------------------------------
+; void vector_fmul(float *dst, const float *src0, const float *src1, int len)
+;-----------------------------------------------------------------------------
+%macro VECTOR_FMUL 0
+cglobal vector_fmul, 4,4,2, dst, src0, src1, len
+ lea lenq, [lend*4 - 2*mmsize]
+ALIGN 16
+.loop
+ mova m0, [src0q + lenq]
+ mova m1, [src0q + lenq + mmsize]
+ mulps m0, m0, [src1q + lenq]
+ mulps m1, m1, [src1q + lenq + mmsize]
+ mova [dstq + lenq], m0
+ mova [dstq + lenq + mmsize], m1
+
+ sub lenq, 2*mmsize
+ jge .loop
+%if mmsize == 32
+ vzeroupper
+ RET
+%else
+ REP_RET
+%endif
+%endmacro
+
+INIT_XMM sse
+VECTOR_FMUL
+%if HAVE_AVX
+INIT_YMM avx
+VECTOR_FMUL
+%endif
+
+;-----------------------------------------------------------------------------
+; void vector_fmul_reverse(float *dst, const float *src0, const float *src1,
+; int len)
+;-----------------------------------------------------------------------------
+%macro VECTOR_FMUL_REVERSE 0
+cglobal vector_fmul_reverse, 4,4,2, dst, src0, src1, len
+ lea lenq, [lend*4 - 2*mmsize]
+ALIGN 16
+.loop
+%if cpuflag(avx)
+ vmovaps xmm0, [src1q + 16]
+ vinsertf128 m0, m0, [src1q], 1
+ vshufps m0, m0, m0, q0123
+ vmovaps xmm1, [src1q + mmsize + 16]
+ vinsertf128 m1, m1, [src1q + mmsize], 1
+ vshufps m1, m1, m1, q0123
+%else
+ mova m0, [src1q]
+ mova m1, [src1q + mmsize]
+ shufps m0, m0, q0123
+ shufps m1, m1, q0123
+%endif
+ mulps m0, m0, [src0q + lenq + mmsize]
+ mulps m1, m1, [src0q + lenq]
+ mova [dstq + lenq + mmsize], m0
+ mova [dstq + lenq], m1
+ add src1q, 2*mmsize
+ sub lenq, 2*mmsize
+ jge .loop
+%if mmsize == 32
+ vzeroupper
+ RET
+%else
+ REP_RET
+%endif
+%endmacro
+
+INIT_XMM sse
+VECTOR_FMUL_REVERSE
+%if HAVE_AVX
+INIT_YMM avx
+VECTOR_FMUL_REVERSE
+%endif
+
+;-----------------------------------------------------------------------------
+; vector_fmul_add(float *dst, const float *src0, const float *src1,
+; const float *src2, int len)
+;-----------------------------------------------------------------------------
+%macro VECTOR_FMUL_ADD 0
+cglobal vector_fmul_add, 5,5,2, dst, src0, src1, src2, len
+ lea lenq, [lend*4 - 2*mmsize]
+ALIGN 16
+.loop
+ mova m0, [src0q + lenq]
+ mova m1, [src0q + lenq + mmsize]
+ mulps m0, m0, [src1q + lenq]
+ mulps m1, m1, [src1q + lenq + mmsize]
+ addps m0, m0, [src2q + lenq]
+ addps m1, m1, [src2q + lenq + mmsize]
+ mova [dstq + lenq], m0
+ mova [dstq + lenq + mmsize], m1
+
+ sub lenq, 2*mmsize
+ jge .loop
+%if mmsize == 32
+ vzeroupper
+ RET
+%else
+ REP_RET
+%endif
+%endmacro
+
+INIT_XMM sse
+VECTOR_FMUL_ADD
+%if HAVE_AVX
+INIT_YMM avx
+VECTOR_FMUL_ADD
+%endif
+
;-----------------------------------------------------------------------------
; void ff_butterflies_float_interleave(float *dst, const float *src0,
; const float *src1, int len);
INIT_XMM sse
BUTTERFLIES_FLOAT_INTERLEAVE
+%if HAVE_AVX
INIT_YMM avx
BUTTERFLIES_FLOAT_INTERLEAVE
+%endif
INIT_XMM sse2
; %1 = aligned/unaligned
projects / ffmpeg / blobdiff