;* MMX optimized DSP utils
;* Copyright (c) 2008 Loren Merritt
;*
-;* This file is part of FFmpeg.
+;* This file is part of Libav.
;*
-;* FFmpeg is free software; you can redistribute it and/or
+;* Libav is free software; you can redistribute it and/or
;* modify it under the terms of the GNU Lesser General Public
;* License as published by the Free Software Foundation; either
;* version 2.1 of the License, or (at your option) any later version.
;*
-;* FFmpeg is distributed in the hope that it will be useful,
+;* Libav is distributed in the hope that it will be useful,
;* but WITHOUT ANY WARRANTY; without even the implied warranty of
;* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
;* Lesser General Public License for more details.
;*
;* You should have received a copy of the GNU Lesser General Public
-;* License along with FFmpeg; if not, write to the Free Software
-;* 51, Inc., Foundation Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+;* License along with Libav; if not, write to the Free Software
+;* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
;******************************************************************************
%include "x86inc.asm"
+%include "x86util.asm"
SECTION_RODATA
pb_f: times 16 db 15
pb_7: times 8 db 7
pb_zzzz3333zzzzbbbb: db -1,-1,-1,-1,3,3,3,3,-1,-1,-1,-1,11,11,11,11
pb_zz11zz55zz99zzdd: db -1,-1,1,1,-1,-1,5,5,-1,-1,9,9,-1,-1,13,13
+pb_revwords: db 14, 15, 12, 13, 10, 11, 8, 9, 6, 7, 4, 5, 2, 3, 0, 1
+pd_16384: times 4 dd 16384
+pb_bswap32: db 3, 2, 1, 0, 7, 6, 5, 4, 11, 10, 9, 8, 15, 14, 13, 12
-section .text align=16
-
-%macro PSWAPD_SSE 2
- pshufw %1, %2, 0x4e
-%endmacro
-%macro PSWAPD_3DN1 2
- movq %1, %2
- psrlq %1, 32
- punpckldq %1, %2
-%endmacro
-
-%macro FLOAT_TO_INT16_INTERLEAVE6 1
-; void ff_float_to_int16_interleave6_sse(int16_t *dst, const float **src, int len)
-cglobal float_to_int16_interleave6_%1, 2,7,0, dst, src, src1, src2, src3, src4, src5
-%ifdef ARCH_X86_64
- %define lend r10d
- mov lend, r2d
-%else
- %define lend dword r2m
-%endif
- mov src1q, [srcq+1*gprsize]
- mov src2q, [srcq+2*gprsize]
- mov src3q, [srcq+3*gprsize]
- mov src4q, [srcq+4*gprsize]
- mov src5q, [srcq+5*gprsize]
- mov srcq, [srcq]
- sub src1q, srcq
- sub src2q, srcq
- sub src3q, srcq
- sub src4q, srcq
- sub src5q, srcq
-.loop:
- cvtps2pi mm0, [srcq]
- cvtps2pi mm1, [srcq+src1q]
- cvtps2pi mm2, [srcq+src2q]
- cvtps2pi mm3, [srcq+src3q]
- cvtps2pi mm4, [srcq+src4q]
- cvtps2pi mm5, [srcq+src5q]
- packssdw mm0, mm3
- packssdw mm1, mm4
- packssdw mm2, mm5
- pswapd mm3, mm0
- punpcklwd mm0, mm1
- punpckhwd mm1, mm2
- punpcklwd mm2, mm3
- pswapd mm3, mm0
- punpckldq mm0, mm2
- punpckhdq mm2, mm1
- punpckldq mm1, mm3
- movq [dstq ], mm0
- movq [dstq+16], mm2
- movq [dstq+ 8], mm1
- add srcq, 8
- add dstq, 24
- sub lend, 2
- jg .loop
- emms
- RET
-%endmacro ; FLOAT_TO_INT16_INTERLEAVE6
-
-%define pswapd PSWAPD_SSE
-FLOAT_TO_INT16_INTERLEAVE6 sse
-%define cvtps2pi pf2id
-%define pswapd PSWAPD_3DN1
-FLOAT_TO_INT16_INTERLEAVE6 3dnow
-%undef pswapd
-FLOAT_TO_INT16_INTERLEAVE6 3dn2
-%undef cvtps2pi
-
-
+SECTION_TEXT
%macro SCALARPRODUCT 1
-; int scalarproduct_int16(int16_t *v1, int16_t *v2, int order, int shift)
-cglobal scalarproduct_int16_%1, 3,3,4, v1, v2, order, shift
+; int scalarproduct_int16(int16_t *v1, int16_t *v2, int order)
+cglobal scalarproduct_int16_%1, 3,3,3, v1, v2, order
shl orderq, 1
add v1q, orderq
add v2q, orderq
neg orderq
- movd m3, shiftm
pxor m2, m2
.loop:
movu m0, [v1q + orderq]
%if mmsize == 16
movhlps m0, m2
paddd m2, m0
- psrad m2, m3
pshuflw m0, m2, 0x4e
%else
- psrad m2, m3
pshufw m0, m2, 0x4e
%endif
paddd m2, m0
%endif
%define t0 [v1q + orderq]
%define t1 [v1q + orderq + mmsize]
-%ifdef ARCH_X86_64
+%if ARCH_X86_64
mova m8, t0
mova m9, t1
%define t0 m8
RET
+;-----------------------------------------------------------------------------
+; void ff_apply_window_int16(int16_t *output, const int16_t *input,
+; const int16_t *window, unsigned int len)
+;-----------------------------------------------------------------------------
+
+%macro REVERSE_WORDS_MMXEXT 1-2
+ pshufw %1, %1, 0x1B
+%endmacro
+
+%macro REVERSE_WORDS_SSE2 1-2
+ pshuflw %1, %1, 0x1B
+ pshufhw %1, %1, 0x1B
+ pshufd %1, %1, 0x4E
+%endmacro
+
+%macro REVERSE_WORDS_SSSE3 2
+ pshufb %1, %2
+%endmacro
+
+; dst = (dst * src) >> 15
+; pmulhw cuts off the bottom bit, so we have to lshift by 1 and add it back
+; in from the pmullw result.
+%macro MUL16FIXED_MMXEXT 3 ; dst, src, temp
+ mova %3, %1
+ pmulhw %1, %2
+ pmullw %3, %2
+ psrlw %3, 15
+ psllw %1, 1
+ por %1, %3
+%endmacro
+
+; dst = ((dst * src) + (1<<14)) >> 15
+%macro MUL16FIXED_SSSE3 3 ; dst, src, unused
+ pmulhrsw %1, %2
+%endmacro
+
+%macro APPLY_WINDOW_INT16 3 ; %1=instruction set, %2=mmxext/sse2 bit exact version, %3=has_ssse3
+cglobal apply_window_int16_%1, 4,5,6, output, input, window, offset, offset2
+ lea offset2q, [offsetq-mmsize]
+%if %2
+ mova m5, [pd_16384]
+%elifidn %1, ssse3
+ mova m5, [pb_revwords]
+ ALIGN 16
+%endif
+.loop:
+%if %2
+ ; This version expands 16-bit to 32-bit, multiplies by the window,
+ ; adds 16384 for rounding, right shifts 15, then repacks back to words to
+ ; save to the output. The window is reversed for the second half.
+ mova m3, [windowq+offset2q]
+ mova m4, [ inputq+offset2q]
+ pxor m0, m0
+ punpcklwd m0, m3
+ punpcklwd m1, m4
+ pmaddwd m0, m1
+ paddd m0, m5
+ psrad m0, 15
+ pxor m2, m2
+ punpckhwd m2, m3
+ punpckhwd m1, m4
+ pmaddwd m2, m1
+ paddd m2, m5
+ psrad m2, 15
+ packssdw m0, m2
+ mova [outputq+offset2q], m0
+ REVERSE_WORDS m3
+ mova m4, [ inputq+offsetq]
+ pxor m0, m0
+ punpcklwd m0, m3
+ punpcklwd m1, m4
+ pmaddwd m0, m1
+ paddd m0, m5
+ psrad m0, 15
+ pxor m2, m2
+ punpckhwd m2, m3
+ punpckhwd m1, m4
+ pmaddwd m2, m1
+ paddd m2, m5
+ psrad m2, 15
+ packssdw m0, m2
+ mova [outputq+offsetq], m0
+%elif %3
+ ; This version does the 16x16->16 multiplication in-place without expanding
+ ; to 32-bit. The ssse3 version is bit-identical.
+ mova m0, [windowq+offset2q]
+ mova m1, [ inputq+offset2q]
+ pmulhrsw m1, m0
+ REVERSE_WORDS m0, m5
+ pmulhrsw m0, [ inputq+offsetq ]
+ mova [outputq+offset2q], m1
+ mova [outputq+offsetq ], m0
+%else
+ ; This version does the 16x16->16 multiplication in-place without expanding
+ ; to 32-bit. The mmxext and sse2 versions do not use rounding, and
+ ; therefore are not bit-identical to the C version.
+ mova m0, [windowq+offset2q]
+ mova m1, [ inputq+offset2q]
+ mova m2, [ inputq+offsetq ]
+ MUL16FIXED m1, m0, m3
+ REVERSE_WORDS m0
+ MUL16FIXED m2, m0, m3
+ mova [outputq+offset2q], m1
+ mova [outputq+offsetq ], m2
+%endif
+ add offsetd, mmsize
+ sub offset2d, mmsize
+ jae .loop
+ REP_RET
+%endmacro
-; void ff_add_hfyu_median_prediction_mmx2(uint8_t *dst, const uint8_t *top, const uint8_t *diff, int w, int *left, int *left_top)
+INIT_MMX
+%define REVERSE_WORDS REVERSE_WORDS_MMXEXT
+%define MUL16FIXED MUL16FIXED_MMXEXT
+APPLY_WINDOW_INT16 mmxext, 0, 0
+APPLY_WINDOW_INT16 mmxext_ba, 1, 0
+INIT_XMM
+%define REVERSE_WORDS REVERSE_WORDS_SSE2
+APPLY_WINDOW_INT16 sse2, 0, 0
+APPLY_WINDOW_INT16 sse2_ba, 1, 0
+APPLY_WINDOW_INT16 ssse3_atom, 0, 1
+%define REVERSE_WORDS REVERSE_WORDS_SSSE3
+APPLY_WINDOW_INT16 ssse3, 0, 1
+
+
+; void add_hfyu_median_prediction_mmx2(uint8_t *dst, const uint8_t *top, const uint8_t *diff, int w, int *left, int *left_top)
cglobal add_hfyu_median_prediction_mmx2, 6,6,0, dst, top, diff, w, left, left_top
movq mm0, [topq]
movq mm2, mm0
RET
%endmacro
-; int ff_add_hfyu_left_prediction(uint8_t *dst, const uint8_t *src, int w, int left)
+; int add_hfyu_left_prediction(uint8_t *dst, const uint8_t *src, int w, int left)
INIT_MMX
cglobal add_hfyu_left_prediction_ssse3, 3,3,7, dst, src, w, left
.skip_prologue:
- mova m5, [pb_7 GLOBAL]
- mova m4, [pb_zzzz3333zzzzbbbb GLOBAL]
- mova m3, [pb_zz11zz55zz99zzdd GLOBAL]
+ mova m5, [pb_7]
+ mova m4, [pb_zzzz3333zzzzbbbb]
+ mova m3, [pb_zz11zz55zz99zzdd]
movd m0, leftm
psllq m0, 56
ADD_HFYU_LEFT_LOOP 1
INIT_XMM
cglobal add_hfyu_left_prediction_sse4, 3,3,7, dst, src, w, left
- mova m5, [pb_f GLOBAL]
- mova m6, [pb_zzzzzzzz77777777 GLOBAL]
- mova m4, [pb_zzzz3333zzzzbbbb GLOBAL]
- mova m3, [pb_zz11zz55zz99zzdd GLOBAL]
+ mova m5, [pb_f]
+ mova m6, [pb_zzzzzzzz77777777]
+ mova m4, [pb_zzzz3333zzzzbbbb]
+ mova m3, [pb_zz11zz55zz99zzdd]
movd m0, leftm
pslldq m0, 15
test srcq, 15
ADD_HFYU_LEFT_LOOP 0
-; float ff_scalarproduct_float_sse(const float *v1, const float *v2, int len)
+; float scalarproduct_float_sse(const float *v1, const float *v2, int len)
cglobal scalarproduct_float_sse, 3,3,2, v1, v2, offset
neg offsetq
shl offsetq, 2
movss xmm1, xmm0
shufps xmm0, xmm0, 1
addss xmm0, xmm1
-%ifndef ARCH_X86_64
+%if ARCH_X86_64 == 0
movd r0m, xmm0
fld dword r0m
%endif
RET
+
+; extern void ff_emu_edge_core(uint8_t *buf, const uint8_t *src, x86_reg linesize,
+; x86_reg start_y, x86_reg end_y, x86_reg block_h,
+; x86_reg start_x, x86_reg end_x, x86_reg block_w);
+;
+; The actual function itself is below. It basically wraps a very simple
+; w = end_x - start_x
+; if (w) {
+; if (w > 22) {
+; jump to the slow loop functions
+; } else {
+; jump to the fast loop functions
+; }
+; }
+;
+; ... and then the same for left/right extend also. See below for loop
+; function implementations. Fast are fixed-width, slow is variable-width
+
+%macro EMU_EDGE_FUNC 0
+%if ARCH_X86_64
+%define w_reg r10
+cglobal emu_edge_core, 6, 7, 1
+ mov r11, r5 ; save block_h
+%else
+%define w_reg r6
+cglobal emu_edge_core, 2, 7, 0
+ mov r4, r4m ; end_y
+ mov r5, r5m ; block_h
+%endif
+
+ ; start with vertical extend (top/bottom) and body pixel copy
+ mov w_reg, r7m
+ sub w_reg, r6m ; w = start_x - end_x
+ sub r5, r4
+%if ARCH_X86_64
+ sub r4, r3
+%else
+ sub r4, dword r3m
+%endif
+ cmp w_reg, 22
+ jg .slow_v_extend_loop
+%if ARCH_X86_32
+ mov r2, r2m ; linesize
+%endif
+ sal w_reg, 7 ; w * 128
+%ifdef PIC
+ lea rax, [.emuedge_v_extend_1 - (.emuedge_v_extend_2 - .emuedge_v_extend_1)]
+ add w_reg, rax
+%else
+ lea w_reg, [.emuedge_v_extend_1 - (.emuedge_v_extend_2 - .emuedge_v_extend_1)+w_reg]
+%endif
+ call w_reg ; fast top extend, body copy and bottom extend
+.v_extend_end:
+
+ ; horizontal extend (left/right)
+ mov w_reg, r6m ; start_x
+ sub r0, w_reg
+%if ARCH_X86_64
+ mov r3, r0 ; backup of buf+block_h*linesize
+ mov r5, r11
+%else
+ mov r0m, r0 ; backup of buf+block_h*linesize
+ mov r5, r5m
+%endif
+ test w_reg, w_reg
+ jz .right_extend
+ cmp w_reg, 22
+ jg .slow_left_extend_loop
+ mov r1, w_reg
+ dec w_reg
+ ; FIXME we can do a if size == 1 here if that makes any speed difference, test me
+ sar w_reg, 1
+ sal w_reg, 6
+ ; r0=buf+block_h*linesize,r10(64)/r6(32)=start_x offset for funcs
+ ; r6(rax)/r3(ebx)=val,r2=linesize,r1=start_x,r5=block_h
+%ifdef PIC
+ lea rax, [.emuedge_extend_left_2]
+ add w_reg, rax
+%else
+ lea w_reg, [.emuedge_extend_left_2+w_reg]
+%endif
+ call w_reg
+
+ ; now r3(64)/r0(32)=buf,r2=linesize,r11/r5=block_h,r6/r3=val, r10/r6=end_x, r1=block_w
+.right_extend:
+%if ARCH_X86_32
+ mov r0, r0m
+ mov r5, r5m
+%endif
+ mov w_reg, r7m ; end_x
+ mov r1, r8m ; block_w
+ mov r4, r1
+ sub r1, w_reg
+ jz .h_extend_end ; if (end_x == block_w) goto h_extend_end
+ cmp r1, 22
+ jg .slow_right_extend_loop
+ dec r1
+ ; FIXME we can do a if size == 1 here if that makes any speed difference, test me
+ sar r1, 1
+ sal r1, 6
+%ifdef PIC
+ lea rax, [.emuedge_extend_right_2]
+ add r1, rax
+%else
+ lea r1, [.emuedge_extend_right_2+r1]
+%endif
+ call r1
+.h_extend_end:
+ RET
+
+%if ARCH_X86_64
+%define vall al
+%define valh ah
+%define valw ax
+%define valw2 r10w
+%define valw3 r3w
+%if WIN64
+%define valw4 r4w
+%else ; unix64
+%define valw4 r3w
+%endif
+%define vald eax
+%else
+%define vall bl
+%define valh bh
+%define valw bx
+%define valw2 r6w
+%define valw3 valw2
+%define valw4 valw3
+%define vald ebx
+%define stack_offset 0x14
+%endif
+
+%endmacro
+
+; macro to read/write a horizontal number of pixels (%2) to/from registers
+; on x86-64, - fills xmm0-15 for consecutive sets of 16 pixels
+; - if (%2 & 15 == 8) fills the last 8 bytes into rax
+; - else if (%2 & 8) fills 8 bytes into mm0
+; - if (%2 & 7 == 4) fills the last 4 bytes into rax
+; - else if (%2 & 4) fills 4 bytes into mm0-1
+; - if (%2 & 3 == 3) fills 2 bytes into r10/r3, and 1 into eax
+; (note that we're using r3 for body/bottom because it's a shorter
+; opcode, and then the loop fits in 128 bytes)
+; - else fills remaining bytes into rax
+; on x86-32, - fills mm0-7 for consecutive sets of 8 pixels
+; - if (%2 & 7 == 4) fills 4 bytes into ebx
+; - else if (%2 & 4) fills 4 bytes into mm0-7
+; - if (%2 & 3 == 3) fills 2 bytes into r6, and 1 into ebx
+; - else fills remaining bytes into ebx
+; writing data out is in the same way
+%macro READ_NUM_BYTES 2
+%assign %%src_off 0 ; offset in source buffer
+%assign %%smidx 0 ; mmx register idx
+%assign %%sxidx 0 ; xmm register idx
+
+%if cpuflag(sse)
+%rep %2/16
+ movups xmm %+ %%sxidx, [r1+%%src_off]
+%assign %%src_off %%src_off+16
+%assign %%sxidx %%sxidx+1
+%endrep ; %2/16
+%endif
+
+%if ARCH_X86_64
+%if (%2-%%src_off) == 8
+ mov rax, [r1+%%src_off]
+%assign %%src_off %%src_off+8
+%endif ; (%2-%%src_off) == 8
+%endif ; x86-64
+
+%rep (%2-%%src_off)/8
+ movq mm %+ %%smidx, [r1+%%src_off]
+%assign %%src_off %%src_off+8
+%assign %%smidx %%smidx+1
+%endrep ; (%2-%%dst_off)/8
+
+%if (%2-%%src_off) == 4
+ mov vald, [r1+%%src_off]
+%elif (%2-%%src_off) & 4
+ movd mm %+ %%smidx, [r1+%%src_off]
+%assign %%src_off %%src_off+4
+%endif ; (%2-%%src_off) ==/& 4
+
+%if (%2-%%src_off) == 1
+ mov vall, [r1+%%src_off]
+%elif (%2-%%src_off) == 2
+ mov valw, [r1+%%src_off]
+%elif (%2-%%src_off) == 3
+%ifidn %1, top
+ mov valw2, [r1+%%src_off]
+%elifidn %1, body
+ mov valw3, [r1+%%src_off]
+%elifidn %1, bottom
+ mov valw4, [r1+%%src_off]
+%endif ; %1 ==/!= top
+ mov vall, [r1+%%src_off+2]
+%endif ; (%2-%%src_off) == 1/2/3
+%endmacro ; READ_NUM_BYTES
+
+%macro WRITE_NUM_BYTES 2
+%assign %%dst_off 0 ; offset in destination buffer
+%assign %%dmidx 0 ; mmx register idx
+%assign %%dxidx 0 ; xmm register idx
+
+%if cpuflag(sse)
+%rep %2/16
+ movups [r0+%%dst_off], xmm %+ %%dxidx
+%assign %%dst_off %%dst_off+16
+%assign %%dxidx %%dxidx+1
+%endrep ; %2/16
+%endif
+
+%if ARCH_X86_64
+%if (%2-%%dst_off) == 8
+ mov [r0+%%dst_off], rax
+%assign %%dst_off %%dst_off+8
+%endif ; (%2-%%dst_off) == 8
+%endif ; x86-64
+
+%rep (%2-%%dst_off)/8
+ movq [r0+%%dst_off], mm %+ %%dmidx
+%assign %%dst_off %%dst_off+8
+%assign %%dmidx %%dmidx+1
+%endrep ; (%2-%%dst_off)/8
+
+%if (%2-%%dst_off) == 4
+ mov [r0+%%dst_off], vald
+%elif (%2-%%dst_off) & 4
+ movd [r0+%%dst_off], mm %+ %%dmidx
+%assign %%dst_off %%dst_off+4
+%endif ; (%2-%%dst_off) ==/& 4
+
+%if (%2-%%dst_off) == 1
+ mov [r0+%%dst_off], vall
+%elif (%2-%%dst_off) == 2
+ mov [r0+%%dst_off], valw
+%elif (%2-%%dst_off) == 3
+%ifidn %1, top
+ mov [r0+%%dst_off], valw2
+%elifidn %1, body
+ mov [r0+%%dst_off], valw3
+%elifidn %1, bottom
+ mov [r0+%%dst_off], valw4
+%endif ; %1 ==/!= top
+ mov [r0+%%dst_off+2], vall
+%endif ; (%2-%%dst_off) == 1/2/3
+%endmacro ; WRITE_NUM_BYTES
+
+; vertical top/bottom extend and body copy fast loops
+; these are function pointers to set-width line copy functions, i.e.
+; they read a fixed number of pixels into set registers, and write
+; those out into the destination buffer
+; r0=buf,r1=src,r2=linesize,r3(64)/r3m(32)=start_x,r4=end_y,r5=block_h
+; r6(eax/64)/r3(ebx/32)=val_reg
+%macro VERTICAL_EXTEND 0
+%assign %%n 1
+%rep 22
+ALIGN 128
+.emuedge_v_extend_ %+ %%n:
+ ; extend pixels above body
+%if ARCH_X86_64
+ test r3 , r3 ; if (!start_y)
+ jz .emuedge_copy_body_ %+ %%n %+ _loop ; goto body
+%else ; ARCH_X86_32
+ cmp dword r3m, 0
+ je .emuedge_copy_body_ %+ %%n %+ _loop
+%endif ; ARCH_X86_64/32
+ READ_NUM_BYTES top, %%n ; read bytes
+.emuedge_extend_top_ %+ %%n %+ _loop: ; do {
+ WRITE_NUM_BYTES top, %%n ; write bytes
+ add r0 , r2 ; dst += linesize
+%if ARCH_X86_64
+ dec r3d
+%else ; ARCH_X86_32
+ dec dword r3m
+%endif ; ARCH_X86_64/32
+ jnz .emuedge_extend_top_ %+ %%n %+ _loop ; } while (--start_y)
+
+ ; copy body pixels
+.emuedge_copy_body_ %+ %%n %+ _loop: ; do {
+ READ_NUM_BYTES body, %%n ; read bytes
+ WRITE_NUM_BYTES body, %%n ; write bytes
+ add r0 , r2 ; dst += linesize
+ add r1 , r2 ; src += linesize
+ dec r4d
+ jnz .emuedge_copy_body_ %+ %%n %+ _loop ; } while (--end_y)
+
+ ; copy bottom pixels
+ test r5 , r5 ; if (!block_h)
+ jz .emuedge_v_extend_end_ %+ %%n ; goto end
+ sub r1 , r2 ; src -= linesize
+ READ_NUM_BYTES bottom, %%n ; read bytes
+.emuedge_extend_bottom_ %+ %%n %+ _loop: ; do {
+ WRITE_NUM_BYTES bottom, %%n ; write bytes
+ add r0 , r2 ; dst += linesize
+ dec r5d
+ jnz .emuedge_extend_bottom_ %+ %%n %+ _loop ; } while (--block_h)
+
+.emuedge_v_extend_end_ %+ %%n:
+%if ARCH_X86_64
+ ret
+%else ; ARCH_X86_32
+ rep ret
+%endif ; ARCH_X86_64/32
+%assign %%n %%n+1
+%endrep
+%endmacro VERTICAL_EXTEND
+
+; left/right (horizontal) fast extend functions
+; these are essentially identical to the vertical extend ones above,
+; just left/right separated because number of pixels to extend is
+; obviously not the same on both sides.
+; for reading, pixels are placed in eax (x86-64) or ebx (x86-64) in the
+; lowest two bytes of the register (so val*0x0101), and are splatted
+; into each byte of mm0 as well if n_pixels >= 8
+
+%macro READ_V_PIXEL 2
+ mov vall, %2
+ mov valh, vall
+%if %1 >= 8
+ movd mm0, vald
+%if cpuflag(mmx2)
+ pshufw mm0, mm0, 0
+%else ; mmx
+ punpcklwd mm0, mm0
+ punpckldq mm0, mm0
+%endif ; sse
+%endif ; %1 >= 8
+%endmacro
+
+%macro WRITE_V_PIXEL 2
+%assign %%dst_off 0
+%rep %1/8
+ movq [%2+%%dst_off], mm0
+%assign %%dst_off %%dst_off+8
+%endrep
+%if %1 & 4
+%if %1 >= 8
+ movd [%2+%%dst_off], mm0
+%else ; %1 < 8
+ mov [%2+%%dst_off] , valw
+ mov [%2+%%dst_off+2], valw
+%endif ; %1 >=/< 8
+%assign %%dst_off %%dst_off+4
+%endif ; %1 & 4
+%if %1&2
+ mov [%2+%%dst_off], valw
+%endif ; %1 & 2
+%endmacro
+
+; r0=buf+block_h*linesize, r1=start_x, r2=linesize, r5=block_h, r6/r3=val
+%macro LEFT_EXTEND 0
+%assign %%n 2
+%rep 11
+ALIGN 64
+.emuedge_extend_left_ %+ %%n: ; do {
+ sub r0, r2 ; dst -= linesize
+ READ_V_PIXEL %%n, [r0+r1] ; read pixels
+ WRITE_V_PIXEL %%n, r0 ; write pixels
+ dec r5
+ jnz .emuedge_extend_left_ %+ %%n ; } while (--block_h)
+%if ARCH_X86_64
+ ret
+%else ; ARCH_X86_32
+ rep ret
+%endif ; ARCH_X86_64/32
+%assign %%n %%n+2
+%endrep
+%endmacro ; LEFT_EXTEND
+
+; r3/r0=buf+block_h*linesize, r2=linesize, r11/r5=block_h, r0/r6=end_x, r6/r3=val
+%macro RIGHT_EXTEND 0
+%assign %%n 2
+%rep 11
+ALIGN 64
+.emuedge_extend_right_ %+ %%n: ; do {
+%if ARCH_X86_64
+ sub r3, r2 ; dst -= linesize
+ READ_V_PIXEL %%n, [r3+w_reg-1] ; read pixels
+ WRITE_V_PIXEL %%n, r3+r4-%%n ; write pixels
+ dec r11
+%else ; ARCH_X86_32
+ sub r0, r2 ; dst -= linesize
+ READ_V_PIXEL %%n, [r0+w_reg-1] ; read pixels
+ WRITE_V_PIXEL %%n, r0+r4-%%n ; write pixels
+ dec r5
+%endif ; ARCH_X86_64/32
+ jnz .emuedge_extend_right_ %+ %%n ; } while (--block_h)
+%if ARCH_X86_64
+ ret
+%else ; ARCH_X86_32
+ rep ret
+%endif ; ARCH_X86_64/32
+%assign %%n %%n+2
+%endrep
+
+%if ARCH_X86_32
+%define stack_offset 0x10
+%endif
+%endmacro ; RIGHT_EXTEND
+
+; below follow the "slow" copy/extend functions, these act on a non-fixed
+; width specified in a register, and run a loop to copy the full amount
+; of bytes. They are optimized for copying of large amounts of pixels per
+; line, so they unconditionally splat data into mm registers to copy 8
+; bytes per loop iteration. It could be considered to use xmm for x86-64
+; also, but I haven't optimized this as much (i.e. FIXME)
+%macro V_COPY_NPX 4-5
+%if %0 == 4
+ test w_reg, %4
+ jz .%1_skip_%4_px
+%else ; %0 == 5
+.%1_%4_px_loop:
+%endif
+ %3 %2, [r1+cnt_reg]
+ %3 [r0+cnt_reg], %2
+ add cnt_reg, %4
+%if %0 == 5
+ sub w_reg, %4
+ test w_reg, %5
+ jnz .%1_%4_px_loop
+%endif
+.%1_skip_%4_px:
+%endmacro
+
+%macro V_COPY_ROW 2
+%ifidn %1, bottom
+ sub r1, linesize
+%endif
+.%1_copy_loop:
+ xor cnt_reg, cnt_reg
+%if notcpuflag(sse)
+%define linesize r2m
+ V_COPY_NPX %1, mm0, movq, 8, 0xFFFFFFF8
+%else ; sse
+ V_COPY_NPX %1, xmm0, movups, 16, 0xFFFFFFF0
+%if ARCH_X86_64
+%define linesize r2
+ V_COPY_NPX %1, rax , mov, 8
+%else ; ARCH_X86_32
+%define linesize r2m
+ V_COPY_NPX %1, mm0, movq, 8
+%endif ; ARCH_X86_64/32
+%endif ; sse
+ V_COPY_NPX %1, vald, mov, 4
+ V_COPY_NPX %1, valw, mov, 2
+ V_COPY_NPX %1, vall, mov, 1
+ mov w_reg, cnt_reg
+%ifidn %1, body
+ add r1, linesize
+%endif
+ add r0, linesize
+ dec %2
+ jnz .%1_copy_loop
+%endmacro
+
+%macro SLOW_V_EXTEND 0
+.slow_v_extend_loop:
+; r0=buf,r1=src,r2(64)/r2m(32)=linesize,r3(64)/r3m(32)=start_x,r4=end_y,r5=block_h
+; r11(64)/r3(later-64)/r2(32)=cnt_reg,r6(64)/r3(32)=val_reg,r10(64)/r6(32)=w=end_x-start_x
+%if ARCH_X86_64
+ push r11 ; save old value of block_h
+ test r3, r3
+%define cnt_reg r11
+ jz .do_body_copy ; if (!start_y) goto do_body_copy
+ V_COPY_ROW top, r3
+%else
+ cmp dword r3m, 0
+%define cnt_reg r2
+ je .do_body_copy ; if (!start_y) goto do_body_copy
+ V_COPY_ROW top, dword r3m
+%endif
+
+.do_body_copy:
+ V_COPY_ROW body, r4
+
+%if ARCH_X86_64
+ pop r11 ; restore old value of block_h
+%define cnt_reg r3
+%endif
+ test r5, r5
+%if ARCH_X86_64
+ jz .v_extend_end
+%else
+ jz .skip_bottom_extend
+%endif
+ V_COPY_ROW bottom, r5
+%if ARCH_X86_32
+.skip_bottom_extend:
+ mov r2, r2m
+%endif
+ jmp .v_extend_end
+%endmacro
+
+%macro SLOW_LEFT_EXTEND 0
+.slow_left_extend_loop:
+; r0=buf+block_h*linesize,r2=linesize,r6(64)/r3(32)=val,r5=block_h,r4=cntr,r10/r6=start_x
+ mov r4, 8
+ sub r0, linesize
+ READ_V_PIXEL 8, [r0+w_reg]
+.left_extend_8px_loop:
+ movq [r0+r4-8], mm0
+ add r4, 8
+ cmp r4, w_reg
+ jle .left_extend_8px_loop
+ sub r4, 8
+ cmp r4, w_reg
+ jge .left_extend_loop_end
+.left_extend_2px_loop:
+ mov [r0+r4], valw
+ add r4, 2
+ cmp r4, w_reg
+ jl .left_extend_2px_loop
+.left_extend_loop_end:
+ dec r5
+ jnz .slow_left_extend_loop
+%if ARCH_X86_32
+ mov r2, r2m
+%endif
+ jmp .right_extend
+%endmacro
+
+%macro SLOW_RIGHT_EXTEND 0
+.slow_right_extend_loop:
+; r3(64)/r0(32)=buf+block_h*linesize,r2=linesize,r4=block_w,r11(64)/r5(32)=block_h,
+; r10(64)/r6(32)=end_x,r6/r3=val,r1=cntr
+%if ARCH_X86_64
+%define buf_reg r3
+%define bh_reg r11
+%else
+%define buf_reg r0
+%define bh_reg r5
+%endif
+ lea r1, [r4-8]
+ sub buf_reg, linesize
+ READ_V_PIXEL 8, [buf_reg+w_reg-1]
+.right_extend_8px_loop:
+ movq [buf_reg+r1], mm0
+ sub r1, 8
+ cmp r1, w_reg
+ jge .right_extend_8px_loop
+ add r1, 8
+ cmp r1, w_reg
+ je .right_extend_loop_end
+.right_extend_2px_loop:
+ sub r1, 2
+ mov [buf_reg+r1], valw
+ cmp r1, w_reg
+ jg .right_extend_2px_loop
+.right_extend_loop_end:
+ dec bh_reg
+ jnz .slow_right_extend_loop
+ jmp .h_extend_end
+%endmacro
+
+%macro emu_edge 1
+INIT_XMM %1
+EMU_EDGE_FUNC
+VERTICAL_EXTEND
+LEFT_EXTEND
+RIGHT_EXTEND
+SLOW_V_EXTEND
+SLOW_LEFT_EXTEND
+SLOW_RIGHT_EXTEND
+%endmacro
+
+emu_edge sse
+%if ARCH_X86_32
+emu_edge mmx
+%endif
+
+;-----------------------------------------------------------------------------
+; void ff_vector_clip_int32(int32_t *dst, const int32_t *src, int32_t min,
+; int32_t max, unsigned int len)
+;-----------------------------------------------------------------------------
+
+; %1 = number of xmm registers used
+; %2 = number of inline load/process/store loops per asm loop
+; %3 = process 4*mmsize (%3=0) or 8*mmsize (%3=1) bytes per loop
+; %4 = CLIPD function takes min/max as float instead of int (CLIPD_SSE2)
+; %5 = suffix
+%macro VECTOR_CLIP_INT32 4-5
+cglobal vector_clip_int32%5, 5,5,%1, dst, src, min, max, len
+%if %4
+ cvtsi2ss m4, minm
+ cvtsi2ss m5, maxm
+%else
+ movd m4, minm
+ movd m5, maxm
+%endif
+ SPLATD m4
+ SPLATD m5
+.loop:
+%assign %%i 1
+%rep %2
+ mova m0, [srcq+mmsize*0*%%i]
+ mova m1, [srcq+mmsize*1*%%i]
+ mova m2, [srcq+mmsize*2*%%i]
+ mova m3, [srcq+mmsize*3*%%i]
+%if %3
+ mova m7, [srcq+mmsize*4*%%i]
+ mova m8, [srcq+mmsize*5*%%i]
+ mova m9, [srcq+mmsize*6*%%i]
+ mova m10, [srcq+mmsize*7*%%i]
+%endif
+ CLIPD m0, m4, m5, m6
+ CLIPD m1, m4, m5, m6
+ CLIPD m2, m4, m5, m6
+ CLIPD m3, m4, m5, m6
+%if %3
+ CLIPD m7, m4, m5, m6
+ CLIPD m8, m4, m5, m6
+ CLIPD m9, m4, m5, m6
+ CLIPD m10, m4, m5, m6
+%endif
+ mova [dstq+mmsize*0*%%i], m0
+ mova [dstq+mmsize*1*%%i], m1
+ mova [dstq+mmsize*2*%%i], m2
+ mova [dstq+mmsize*3*%%i], m3
+%if %3
+ mova [dstq+mmsize*4*%%i], m7
+ mova [dstq+mmsize*5*%%i], m8
+ mova [dstq+mmsize*6*%%i], m9
+ mova [dstq+mmsize*7*%%i], m10
+%endif
+%assign %%i %%i+1
+%endrep
+ add srcq, mmsize*4*(%2+%3)
+ add dstq, mmsize*4*(%2+%3)
+ sub lend, mmsize*(%2+%3)
+ jg .loop
+ REP_RET
+%endmacro
+
+INIT_MMX mmx
+%define SPLATD SPLATD_MMX
+%define CLIPD CLIPD_MMX
+VECTOR_CLIP_INT32 0, 1, 0, 0
+INIT_XMM sse2
+%define SPLATD SPLATD_SSE2
+VECTOR_CLIP_INT32 6, 1, 0, 0, _int
+%define CLIPD CLIPD_SSE2
+VECTOR_CLIP_INT32 6, 2, 0, 1
+INIT_XMM sse4
+%define CLIPD CLIPD_SSE41
+%ifdef m8
+VECTOR_CLIP_INT32 11, 1, 1, 0
+%else
+VECTOR_CLIP_INT32 6, 1, 0, 0
+%endif
+
+;-----------------------------------------------------------------------------
+; void ff_butterflies_float_interleave(float *dst, const float *src0,
+; const float *src1, int len);
+;-----------------------------------------------------------------------------
+
+%macro BUTTERFLIES_FLOAT_INTERLEAVE 0
+cglobal butterflies_float_interleave, 4,4,3, dst, src0, src1, len
+%if ARCH_X86_64
+ movsxd lenq, lend
+%endif
+ test lenq, lenq
+ jz .end
+ shl lenq, 2
+ lea src0q, [src0q + lenq]
+ lea src1q, [src1q + lenq]
+ lea dstq, [ dstq + 2*lenq]
+ neg lenq
+.loop:
+ mova m0, [src0q + lenq]
+ mova m1, [src1q + lenq]
+ subps m2, m0, m1
+ addps m0, m0, m1
+ unpcklps m1, m0, m2
+ unpckhps m0, m0, m2
+%if cpuflag(avx)
+ vextractf128 [dstq + 2*lenq ], m1, 0
+ vextractf128 [dstq + 2*lenq + 16], m0, 0
+ vextractf128 [dstq + 2*lenq + 32], m1, 1
+ vextractf128 [dstq + 2*lenq + 48], m0, 1
+%else
+ mova [dstq + 2*lenq ], m1
+ mova [dstq + 2*lenq + mmsize], m0
+%endif
+ add lenq, mmsize
+ jl .loop
+%if mmsize == 32
+ vzeroupper
+ RET
+%endif
+.end:
+ REP_RET
+%endmacro
+
+INIT_XMM sse
+BUTTERFLIES_FLOAT_INTERLEAVE
+INIT_YMM avx
+BUTTERFLIES_FLOAT_INTERLEAVE
+
+INIT_XMM sse2
+; %1 = aligned/unaligned
+%macro BSWAP_LOOPS_SSE2 1
+ mov r3, r2
+ sar r2, 3
+ jz .left4_%1
+.loop8_%1:
+ mov%1 m0, [r1 + 0]
+ mov%1 m1, [r1 + 16]
+ pshuflw m0, m0, 10110001b
+ pshuflw m1, m1, 10110001b
+ pshufhw m0, m0, 10110001b
+ pshufhw m1, m1, 10110001b
+ mova m2, m0
+ mova m3, m1
+ psllw m0, 8
+ psllw m1, 8
+ psrlw m2, 8
+ psrlw m3, 8
+ por m2, m0
+ por m3, m1
+ mova [r0 + 0], m2
+ mova [r0 + 16], m3
+ add r1, 32
+ add r0, 32
+ dec r2
+ jnz .loop8_%1
+.left4_%1:
+ mov r2, r3
+ and r3, 4
+ jz .left
+ mov%1 m0, [r1]
+ pshuflw m0, m0, 10110001b
+ pshufhw m0, m0, 10110001b
+ mova m2, m0
+ psllw m0, 8
+ psrlw m2, 8
+ por m2, m0
+ mova [r0], m2
+ add r1, 16
+ add r0, 16
+%endmacro
+
+; void bswap_buf(uint32_t *dst, const uint32_t *src, int w);
+cglobal bswap32_buf, 3,4,5
+ mov r3, r1
+ and r3, 15
+ jz .start_align
+ BSWAP_LOOPS_SSE2 u
+ jmp .left
+.start_align:
+ BSWAP_LOOPS_SSE2 a
+.left:
+ and r2, 3
+ jz .end
+.loop2:
+ mov r3d, [r1]
+ bswap r3d
+ mov [r0], r3d
+ add r1, 4
+ add r0, 4
+ dec r2
+ jnz .loop2
+.end
+ RET
+
+; %1 = aligned/unaligned
+%macro BSWAP_LOOPS_SSSE3 1
+ mov r3, r2
+ sar r2, 3
+ jz .left4_%1
+.loop8_%1:
+ mov%1 m0, [r1 + 0]
+ mov%1 m1, [r1 + 16]
+ pshufb m0, m2
+ pshufb m1, m2
+ mova [r0 + 0], m0
+ mova [r0 + 16], m1
+ add r0, 32
+ add r1, 32
+ dec r2
+ jnz .loop8_%1
+.left4_%1:
+ mov r2, r3
+ and r3, 4
+ jz .left2
+ mov%1 m0, [r1]
+ pshufb m0, m2
+ mova [r0], m0
+ add r1, 16
+ add r0, 16
+%endmacro
+
+INIT_XMM ssse3
+; void bswap_buf(uint32_t *dst, const uint32_t *src, int w);
+cglobal bswap32_buf, 3,4,3
+ mov r3, r1
+ mova m2, [pb_bswap32]
+ and r3, 15
+ jz .start_align
+ BSWAP_LOOPS_SSSE3 u
+ jmp .left2
+.start_align:
+ BSWAP_LOOPS_SSSE3 a
+.left2:
+ mov r3, r2
+ and r2, 2
+ jz .left1
+ movq m0, [r1]
+ pshufb m0, m2
+ movq [r0], m0
+ add r1, 8
+ add r0, 8
+.left1:
+ and r3, 1
+ jz .end
+ mov r2d, [r1]
+ bswap r2d
+ mov [r0], r2d
+.end:
+ RET
projects / ffmpeg / blobdiff