* information will be in AVStream.time_base units, i.e. it has to be
* multiplied by the timebase to convert them to seconds.
*
- * If AVPacket.buf is set on the returned packet, then the packet is
- * allocated dynamically and the user may keep it indefinitely.
- * Otherwise, if AVPacket.buf is NULL, the packet data is backed by a
- * static storage somewhere inside the demuxer and the packet is only valid
- * until the next av_read_frame() call or closing the file. If the caller
- * requires a longer lifetime, av_packet_make_refcounted() will ensure that
- * the data is reference counted, copying the data if necessary.
- * In both cases, the packet must be freed with av_packet_unref() when it is no
+ * A packet returned by av_read_frame() is always reference-counted,
+ * i.e. AVPacket.buf is set and the user may keep it indefinitely.
+ * The packet must be freed with av_packet_unref() when it is no
* longer needed.
*
* @section lavf_decoding_seek Seeking
* sorting will have '-sort' appended. E.g. artist="The Beatles",
* artist-sort="Beatles, The".
* - Some protocols and demuxers support metadata updates. After a successful
- * call to av_read_packet(), AVFormatContext.event_flags or AVStream.event_flags
+ * call to av_read_frame(), AVFormatContext.event_flags or AVStream.event_flags
* will be updated to indicate if metadata changed. In order to detect metadata
* changes on a stream, you need to loop through all streams in the AVFormatContext
* and check their individual event_flags.
#else
#define ff_const59 const
#endif
+#if FF_API_NEXT
ff_const59 struct AVOutputFormat *next;
+#endif
/**
* size of private data so that it can be allocated in the wrapper
*/
int (*write_packet)(struct AVFormatContext *, AVPacket *pkt);
int (*write_trailer)(struct AVFormatContext *);
/**
- * Currently only used to set pixel format if not YUV420P.
+ * A format-specific function for interleavement.
+ * If unset, packets will be interleaved by dts.
*/
int (*interleave_packet)(struct AVFormatContext *, AVPacket *out,
AVPacket *in, int flush);
* New public fields should be added right above.
*****************************************************************
*/
+#if FF_API_NEXT
ff_const59 struct AVInputFormat *next;
+#endif
/**
* Raw demuxers store their codec ID here.
* AVFMTCTX_NOHEADER is used and only in the calling thread (not in a
* background thread).
* @return 0 on success, < 0 on error.
- * When returning an error, pkt must not have been allocated
- * or must be freed before returning
+ * Upon returning an error, pkt must be unreferenced by the caller.
*/
int (*read_packet)(struct AVFormatContext *, AVPacket *pkt);
int nb_side_data;
/**
- * Flags for the user to detect events happening on the stream. Flags must
- * be cleared by the user once the event has been handled.
- * A combination of AVSTREAM_EVENT_FLAG_*.
+ * Flags indicating events happening on the stream, a combination of
+ * AVSTREAM_EVENT_FLAG_*.
+ *
+ * - demuxing: may be set by the demuxer in avformat_open_input(),
+ * avformat_find_stream_info() and av_read_frame(). Flags must be cleared
+ * by the user once the event has been handled.
+ * - muxing: may be set by the user after avformat_write_header(). to
+ * indicate a user-triggered event. The muxer will clear the flags for
+ * events it has handled in av_[interleaved]_write_frame().
*/
int event_flags;
-#define AVSTREAM_EVENT_FLAG_METADATA_UPDATED 0x0001 ///< The call resulted in updated metadata.
+/**
+ * - demuxing: the demuxer read new metadata from the file and updated
+ * AVStream.metadata accordingly
+ * - muxing: the user updated AVStream.metadata and wishes the muxer to write
+ * it into the file
+ */
+#define AVSTREAM_EVENT_FLAG_METADATA_UPDATED 0x0001
+/**
+ * - demuxing: new packets for this stream were read from the file. This
+ * event is informational only and does not guarantee that new packets
+ * for this stream will necessarily be returned from av_read_frame().
+ */
+#define AVSTREAM_EVENT_FLAG_NEW_PACKETS (1 << 1)
/**
* Real base framerate of the stream.
*****************************************************************
*/
-#define MAX_STD_TIMEBASES (30*12+30+3+6)
- /**
- * Stream information used internally by avformat_find_stream_info()
- */
- struct {
- int64_t last_dts;
- int64_t duration_gcd;
- int duration_count;
- int64_t rfps_duration_sum;
- double (*duration_error)[2][MAX_STD_TIMEBASES];
- int64_t codec_info_duration;
- int64_t codec_info_duration_fields;
- int frame_delay_evidence;
-
- /**
- * 0 -> decoder has not been searched for yet.
- * >0 -> decoder found
- * <0 -> decoder with codec_id == -found_decoder has not been found
- */
- int found_decoder;
-
- int64_t last_duration;
-
- /**
- * Those are used for average framerate estimation.
- */
- int64_t fps_first_dts;
- int fps_first_dts_idx;
- int64_t fps_last_dts;
- int fps_last_dts_idx;
-
- } *info;
+#if LIBAVFORMAT_VERSION_MAJOR < 59
+ // kept for ABI compatibility only, do not access in any way
+ void *unused;
+#endif
int pts_wrap_bits; /**< number of bits in pts (used for wrapping control) */
* -1 -> probing finished
* 0 -> no probing requested
* rest -> perform probing with request_probe being the minimum score to accept.
- * NOT PART OF PUBLIC API
*/
int request_probe;
/**
*/
int64_t last_discard_sample;
- /**
- * Number of internally decoded frames, used internally in libavformat, do not access
- * its lifetime differs from info which is why it is not in that structure.
- */
- int nb_decoded_frames;
-
- /**
- * Timestamp offset added to timestamps before muxing
- * NOT PART OF PUBLIC API
- */
- int64_t mux_ts_offset;
-
- /**
- * Internal data to check for wrapping of the time stamp
- */
- int64_t pts_wrap_reference;
-
- /**
- * Options for behavior, when a wrap is detected.
- *
- * Defined by AV_PTS_WRAP_ values.
- *
- * If correction is enabled, there are two possibilities:
- * If the first time stamp is near the wrap point, the wrap offset
- * will be subtracted, which will create negative time stamps.
- * Otherwise the offset will be added.
- */
- int pts_wrap_behavior;
-
- /**
- * Internal data to prevent doing update_initial_durations() twice
- */
- int update_initial_durations_done;
-
- /**
- * Internal data to generate dts from pts
- */
- int64_t pts_reorder_error[MAX_REORDER_DELAY+1];
- uint8_t pts_reorder_error_count[MAX_REORDER_DELAY+1];
-
- /**
- * Internal data to analyze DTS and detect faulty mpeg streams
- */
- int64_t last_dts_for_order_check;
- uint8_t dts_ordered;
- uint8_t dts_misordered;
-
- /**
- * Internal data to inject global side data
- */
- int inject_global_side_data;
-
- /**
- * display aspect ratio (0 if unknown)
- * - encoding: unused
- * - decoding: Set by libavformat to calculate sample_aspect_ratio internally
- */
- AVRational display_aspect_ratio;
-
/**
* An opaque field for libavformat internal usage.
* Must not be accessed in any way by callers.
int strict_std_compliance;
/**
- * Flags for the user to detect events happening on the file. Flags must
- * be cleared by the user once the event has been handled.
- * A combination of AVFMT_EVENT_FLAG_*.
+ * Flags indicating events happening on the file, a combination of
+ * AVFMT_EVENT_FLAG_*.
+ *
+ * - demuxing: may be set by the demuxer in avformat_open_input(),
+ * avformat_find_stream_info() and av_read_frame(). Flags must be cleared
+ * by the user once the event has been handled.
+ * - muxing: may be set by the user after avformat_write_header() to
+ * indicate a user-triggered event. The muxer will clear the flags for
+ * events it has handled in av_[interleaved]_write_frame().
*/
int event_flags;
-#define AVFMT_EVENT_FLAG_METADATA_UPDATED 0x0001 ///< The call resulted in updated metadata.
+/**
+ * - demuxing: the demuxer read new metadata from the file and updated
+ * AVFormatContext.metadata accordingly
+ * - muxing: the user updated AVFormatContext.metadata and wishes the muxer to
+ * write it into the file
+ */
+#define AVFMT_EVENT_FLAG_METADATA_UPDATED 0x0001
/**
* Maximum number of packets to read while waiting for the first timestamp.
* - decoding: set by user
*/
int skip_estimate_duration_from_pts;
+
+ /**
+ * Maximum number of packets that can be probed
+ * - encoding: unused
+ * - decoding: set by user
+ */
+ int max_probe_packets;
} AVFormatContext;
#if FF_API_FORMAT_GET_SET
*/
enum AVDurationEstimationMethod av_fmt_ctx_get_duration_estimation_method(const AVFormatContext* ctx);
-typedef struct AVPacketList {
- AVPacket pkt;
- struct AVPacketList *next;
-} AVPacketList;
-
-
/**
* @defgroup lavf_core Core functions
* @ingroup libavf
*
* @param stream stream
* @param type desired side information type
- * @param size pointer for side information size to store (optional)
+ * @param size If supplied, *size will be set to the size of the side data
+ * or to zero if the desired side data is not present.
* @return pointer to data if present or NULL otherwise
*/
uint8_t *av_stream_get_side_data(const AVStream *stream,
* omit invalid data between valid frames so as to give the decoder the maximum
* information possible for decoding.
*
- * If pkt->buf is NULL, then the packet is valid until the next
- * av_read_frame() or until avformat_close_input(). Otherwise the packet
- * is valid indefinitely. In both cases the packet must be freed with
- * av_packet_unref when it is no longer needed. For video, the packet contains
- * exactly one frame. For audio, it contains an integer number of frames if each
- * frame has a known fixed size (e.g. PCM or ADPCM data). If the audio frames
- * have a variable size (e.g. MPEG audio), then it contains one frame.
+ * On success, the returned packet is reference-counted (pkt->buf is set) and
+ * valid indefinitely. The packet must be freed with av_packet_unref() when
+ * it is no longer needed. For video, the packet contains exactly one frame.
+ * For audio, it contains an integer number of frames if each frame has
+ * a known fixed size (e.g. PCM or ADPCM data). If the audio frames have
+ * a variable size (e.g. MPEG audio), then it contains one frame.
*
* pkt->pts, pkt->dts and pkt->duration are always set to correct
* values in AVStream.time_base units (and guessed if the format cannot
* has B-frames, so it is better to rely on pkt->dts if you do not
* decompress the payload.
*
- * @return 0 if OK, < 0 on error or end of file
+ * @return 0 if OK, < 0 on error or end of file. On error, pkt will be blank
+ * (as if it came from av_packet_alloc()).
+ *
+ * @note pkt will be initialized, so it may be uninitialized, but it must not
+ * contain data that needs to be freed.
*/
int av_read_frame(AVFormatContext *s, AVPacket *pkt);
* @return >=0 on success, error code otherwise
*
* @note This is part of the new seek API which is still under construction.
- * Thus do not use this yet. It may change at any time, do not expect
- * ABI compatibility yet!
*/
int avformat_seek_file(AVFormatContext *s, int stream_index, int64_t min_ts, int64_t ts, int64_t max_ts, int flags);
* Write an uncoded frame to an output media file.
*
* The frame must be correctly interleaved according to the container
- * specification; if not, then av_interleaved_write_frame() must be used.
+ * specification; if not, av_interleaved_write_uncoded_frame() must be used.
*
- * See av_interleaved_write_frame() for details.
+ * See av_interleaved_write_uncoded_frame() for details.
*/
int av_write_uncoded_frame(AVFormatContext *s, int stream_index,
AVFrame *frame);
projects / ffmpeg / blobdiff