#endif
#include "libavutil/avutil.h"
+#include "libavutil/log.h"
+#include "libavutil/pixfmt.h"
#define STR(s) AV_TOSTRING(s) //AV_STRINGIFY is too long
int srcStride[], int srcSliceY, int srcSliceH,
uint8_t* dst[], int dstStride[]);
+/**
+ * Write one line of horizontally scaled Y/U/V/A to planar output
+ * without any additional vertical scaling (or point-scaling).
+ *
+ * @param c SWS scaling context
+ * @param lumSrc scaled luma (Y) source data, 15bit for 8bit output
+ * @param chrUSrc scaled chroma (U) source data, 15bit for 8bit output
+ * @param chrVSrc scaled chroma (V) source data, 15bit for 8bit output
+ * @param alpSrc scaled alpha (A) source data, 15bit for 8bit output
+ * @param dest pointer to the 4 output planes (Y/U/V/A)
+ * @param dstW width of dest[0], dest[3], lumSrc and alpSrc in pixels
+ * @param chrDstW width of dest[1], dest[2], chrUSrc and chrVSrc
+ */
typedef void (*yuv2planar1_fn) (struct SwsContext *c,
const int16_t *lumSrc, const int16_t *chrUSrc,
const int16_t *chrVSrc, const int16_t *alpSrc,
uint8_t *dest[4], int dstW, int chrDstW);
+/**
+ * Write one line of horizontally scaled Y/U/V/A to planar output
+ * with multi-point vertical scaling between input pixels.
+ *
+ * @param c SWS scaling context
+ * @param lumFilter vertical luma/alpha scaling coefficients, 12bit [0,4096]
+ * @param lumSrc scaled luma (Y) source data, 15bit for 8bit output
+ * @param lumFilterSize number of vertical luma/alpha input lines to scale
+ * @param chrFilter vertical chroma scaling coefficients, 12bit [0,4096]
+ * @param chrUSrc scaled chroma (U) source data, 15bit for 8bit output
+ * @param chrVSrc scaled chroma (V) source data, 15bit for 8bit output
+ * @param chrFilterSize number of vertical chroma input lines to scale
+ * @param alpSrc scaled alpha (A) source data, 15bit for 8bit output
+ * @param dest pointer to the 4 output planes (Y/U/V/A)
+ * @param dstW width of dest[0], dest[3], lumSrc and alpSrc in pixels
+ * @param chrDstW width of dest[1], dest[2], chrUSrc and chrVSrc
+ */
typedef void (*yuv2planarX_fn) (struct SwsContext *c, const int16_t *lumFilter,
const int16_t **lumSrc, int lumFilterSize,
const int16_t *chrFilter, const int16_t **chrUSrc,
const int16_t **chrVSrc, int chrFilterSize,
const int16_t **alpSrc, uint8_t *dest[4],
int dstW, int chrDstW);
+/**
+ * Write one line of horizontally scaled Y/U/V/A to packed-pixel YUV/RGB
+ * output without any additional vertical scaling (or point-scaling). Note
+ * that this function may do chroma scaling, see the "uvalpha" argument.
+ *
+ * @param c SWS scaling context
+ * @param lumSrc scaled luma (Y) source data, 15bit for 8bit output
+ * @param chrUSrc scaled chroma (U) source data, 15bit for 8bit output
+ * @param chrVSrc scaled chroma (V) source data, 15bit for 8bit output
+ * @param alpSrc scaled alpha (A) source data, 15bit for 8bit output
+ * @param dest pointer to the output plane
+ * @param dstW width of lumSrc and alpSrc in pixels, number of pixels
+ * to write into dest[]
+ * @param uvalpha chroma scaling coefficient for the second line of chroma
+ * pixels, either 2048 or 0. If 0, one chroma input is used
+ * for 2 output pixels (or if the SWS_FLAG_FULL_CHR_INT flag
+ * is set, it generates 1 output pixel). If 2048, two chroma
+ * input pixels should be averaged for 2 output pixels (this
+ * only happens if SWS_FLAG_FULL_CHR_INT is not set)
+ * @param y vertical line number for this output. This does not need
+ * to be used to calculate the offset in the destination,
+ * but can be used to generate comfort noise using dithering
+ * for some output formats.
+ */
typedef void (*yuv2packed1_fn) (struct SwsContext *c, const int16_t *lumSrc,
const int16_t *chrUSrc[2], const int16_t *chrVSrc[2],
const int16_t *alpSrc, uint8_t *dest,
int dstW, int uvalpha, int y);
+/**
+ * Write one line of horizontally scaled Y/U/V/A to packed-pixel YUV/RGB
+ * output by doing bilinear scaling between two input lines.
+ *
+ * @param c SWS scaling context
+ * @param lumSrc scaled luma (Y) source data, 15bit for 8bit output
+ * @param chrUSrc scaled chroma (U) source data, 15bit for 8bit output
+ * @param chrVSrc scaled chroma (V) source data, 15bit for 8bit output
+ * @param alpSrc scaled alpha (A) source data, 15bit for 8bit output
+ * @param dest pointer to the output plane
+ * @param dstW width of lumSrc and alpSrc in pixels, number of pixels
+ * to write into dest[]
+ * @param yalpha luma/alpha scaling coefficients for the second input line.
+ * The first line's coefficients can be calculated by using
+ * 4096 - yalpha
+ * @param uvalpha chroma scaling coefficient for the second input line. The
+ * first line's coefficients can be calculated by using
+ * 4096 - uvalpha
+ * @param y vertical line number for this output. This does not need
+ * to be used to calculate the offset in the destination,
+ * but can be used to generate comfort noise using dithering
+ * for some output formats.
+ */
typedef void (*yuv2packed2_fn) (struct SwsContext *c, const int16_t *lumSrc[2],
const int16_t *chrUSrc[2], const int16_t *chrVSrc[2],
const int16_t *alpSrc[2], uint8_t *dest,
int dstW, int yalpha, int uvalpha, int y);
+/**
+ * Write one line of horizontally scaled Y/U/V/A to packed-pixel YUV/RGB
+ * output by doing multi-point vertical scaling between input pixels.
+ *
+ * @param c SWS scaling context
+ * @param lumFilter vertical luma/alpha scaling coefficients, 12bit [0,4096]
+ * @param lumSrc scaled luma (Y) source data, 15bit for 8bit output
+ * @param lumFilterSize number of vertical luma/alpha input lines to scale
+ * @param chrFilter vertical chroma scaling coefficients, 12bit [0,4096]
+ * @param chrUSrc scaled chroma (U) source data, 15bit for 8bit output
+ * @param chrVSrc scaled chroma (V) source data, 15bit for 8bit output
+ * @param chrFilterSize number of vertical chroma input lines to scale
+ * @param alpSrc scaled alpha (A) source data, 15bit for 8bit output
+ * @param dest pointer to the output plane
+ * @param dstW width of lumSrc and alpSrc in pixels, number of pixels
+ * to write into dest[]
+ * @param y vertical line number for this output. This does not need
+ * to be used to calculate the offset in the destination,
+ * but can be used to generate comfort noise using dithering
+ * or some output formats.
+ */
typedef void (*yuv2packedX_fn) (struct SwsContext *c, const int16_t *lumFilter,
const int16_t **lumSrc, int lumFilterSize,
const int16_t *chrFilter, const int16_t **chrUSrc,
enum PixelFormat srcFormat; ///< Source pixel format.
int dstFormatBpp; ///< Number of bits per pixel of the destination pixel format.
int srcFormatBpp; ///< Number of bits per pixel of the source pixel format.
+ int scalingBpp;
int chrSrcHSubSample; ///< Binary logarithm of horizontal subsampling factor between luma/alpha and chroma planes in source image.
int chrSrcVSubSample; ///< Binary logarithm of vertical subsampling factor between luma/alpha and chroma planes in source image.
int chrDstHSubSample; ///< Binary logarithm of horizontal subsampling factor between luma/alpha and chroma planes in destination image.
#define V_TEMP "11*8+4*4*256*2+32"
#define Y_TEMP "11*8+4*4*256*2+40"
#define ALP_MMX_FILTER_OFFSET "11*8+4*4*256*2+48"
-#define UV_OFF "11*8+4*4*256*3+48"
-#define UV_OFFx2 "11*8+4*4*256*3+56"
+#define UV_OFF_PX "11*8+4*4*256*3+48"
+#define UV_OFF_BYTE "11*8+4*4*256*3+56"
+#define DITHER16 "11*8+4*4*256*3+64"
+#define DITHER32 "11*8+4*4*256*3+80"
DECLARE_ALIGNED(8, uint64_t, redDither);
DECLARE_ALIGNED(8, uint64_t, greenDither);
DECLARE_ALIGNED(8, uint64_t, v_temp);
DECLARE_ALIGNED(8, uint64_t, y_temp);
int32_t alpMmxFilter[4*MAX_FILTER_SIZE];
- DECLARE_ALIGNED(8, ptrdiff_t, uv_off); ///< offset (in pixels) between u and v planes
- DECLARE_ALIGNED(8, ptrdiff_t, uv_offx2); ///< offset (in bytes) between u and v planes
+ // alignment of these values is not necessary, but merely here
+ // to maintain the same offset across x8632 and x86-64. Once we
+ // use proper offset macros in the asm, they can be removed.
+ DECLARE_ALIGNED(8, ptrdiff_t, uv_off_px); ///< offset (in pixels) between u and v planes
+ DECLARE_ALIGNED(8, ptrdiff_t, uv_off_byte); ///< offset (in bytes) between u and v planes
+ DECLARE_ALIGNED(8, uint16_t, dither16)[8];
+ DECLARE_ALIGNED(8, uint32_t, dither32)[8];
+
+ const uint8_t *chrDither8, *lumDither8;
#if HAVE_ALTIVEC
vector signed short CY;
void (*chrToYV12)(uint8_t *dstU, uint8_t *dstV,
const uint8_t *src1, const uint8_t *src2,
int width, uint32_t *pal); ///< Unscaled conversion of chroma planes to YV12 for horizontal scaler.
+ /**
+ * Scale one horizontal line of input data using a bilinear filter
+ * to produce one line of output data. Compared to SwsContext->hScale(),
+ * please take note of the following caveats when using these:
+ * - Scaling is done using only 7bit instead of 14bit coefficients.
+ * - You can use no more than 5 input pixels to produce 4 output
+ * pixels. Therefore, this filter should not be used for downscaling
+ * by more than ~20% in width (because that equals more than 5/4th
+ * downscaling and thus more than 5 pixels input per 4 pixels output).
+ * - In general, bilinear filters create artifacts during downscaling
+ * (even when <20%), because one output pixel will span more than one
+ * input pixel, and thus some pixels will need edges of both neighbor
+ * pixels to interpolate the output pixel. Since you can use at most
+ * two input pixels per output pixel in bilinear scaling, this is
+ * impossible and thus downscaling by any size will create artifacts.
+ * To enable this type of scaling, set SWS_FLAG_FAST_BILINEAR
+ * in SwsContext->flags.
+ */
+ /** @{ */
void (*hyscale_fast)(struct SwsContext *c,
int16_t *dst, int dstWidth,
const uint8_t *src, int srcW, int xInc);
int16_t *dst1, int16_t *dst2, int dstWidth,
const uint8_t *src1, const uint8_t *src2,
int srcW, int xInc);
+ /** @} */
- void (*hScale)(int16_t *dst, int dstW, const uint8_t *src,
+ /**
+ * Scale one horizontal line of input data using a filter over the input
+ * lines, to produce one (differently sized) line of output data.
+ *
+ * @param dst pointer to destination buffer for horizontally scaled
+ * data. If the scaling depth (SwsContext->scalingBpp) is
+ * 8, data will be 15bpp in 16bits (int16_t) width. If
+ * scaling depth is 16, data will be 19bpp in 32bpp
+ * (int32_t) width.
+ * @param dstW width of destination image
+ * @param src pointer to source data to be scaled. If scaling depth
+ * is 8, this is 8bpp in 8bpp (uint8_t) width. If scaling
+ * depth is 16, this is native depth in 16bbp (uint16_t)
+ * width. In other words, for 9-bit YUV input, this is
+ * 9bpp, for 10-bit YUV input, this is 10bpp, and for
+ * 16-bit RGB or YUV, this is 16bpp.
+ * @param filter filter coefficients to be used per output pixel for
+ * scaling. This contains 14bpp filtering coefficients.
+ * Guaranteed to contain dstW * filterSize entries.
+ * @param filterPos position of the first input pixel to be used for
+ * each output pixel during scaling. Guaranteed to
+ * contain dstW entries.
+ * @param filterSize the number of input coefficients to be used (and
+ * thus the number of input pixels to be used) for
+ * creating a single output pixel. Is aligned to 4
+ * (and input coefficients thus padded with zeroes)
+ * to simplify creating SIMD code.
+ */
+ void (*hScale)(struct SwsContext *c, int16_t *dst, int dstW, const uint8_t *src,
const int16_t *filter, const int16_t *filterPos,
int filterSize);
void (*lumConvertRange)(int16_t *dst, int width); ///< Color range conversion function for luma plane if needed.
void (*chrConvertRange)(int16_t *dst1, int16_t *dst2, int width); ///< Color range conversion function for chroma planes if needed.
+ /**
+ * dst[..] = (src[..] << 8) | src[..];
+ */
+ void (*scale8To16Rv)(uint16_t *dst, const uint8_t *src, int len);
+ /**
+ * dst[..] = src[..] >> 4;
+ */
+ void (*scale19To15Fw)(int16_t *dst, const int32_t *src, int len);
+
int needs_hcscale; ///< Set if there are chroma planes to be converted.
} SwsContext;