-# lib-link.m4 serial 13 (gettext-0.17)
-dnl Copyright (C) 2001-2007 Free Software Foundation, Inc.
+# lib-link.m4 serial 9 (gettext-0.16)
+dnl Copyright (C) 2001-2006 Free Software Foundation, Inc.
dnl This file is free software; the Free Software Foundation
dnl gives unlimited permission to copy and/or distribute it,
dnl with or without modifications, as long as this notice is preserved.
dnl From Bruno Haible.
-AC_PREREQ(2.54)
+AC_PREREQ(2.50)
dnl AC_LIB_LINKFLAGS(name [, dependencies]) searches for libname and
dnl the libraries corresponding to explicit and implicit dependencies.
dnl Sets and AC_SUBSTs the LIB${NAME} and LTLIB${NAME} variables and
dnl augments the CPPFLAGS variable.
-dnl Sets and AC_SUBSTs the LIB${NAME}_PREFIX variable to nonempty if libname
-dnl was found in ${LIB${NAME}_PREFIX}/$acl_libdirstem.
AC_DEFUN([AC_LIB_LINKFLAGS],
[
AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
ac_cv_lib[]Name[]_libs="$LIB[]NAME"
ac_cv_lib[]Name[]_ltlibs="$LTLIB[]NAME"
ac_cv_lib[]Name[]_cppflags="$INC[]NAME"
- ac_cv_lib[]Name[]_prefix="$LIB[]NAME[]_PREFIX"
])
LIB[]NAME="$ac_cv_lib[]Name[]_libs"
LTLIB[]NAME="$ac_cv_lib[]Name[]_ltlibs"
INC[]NAME="$ac_cv_lib[]Name[]_cppflags"
- LIB[]NAME[]_PREFIX="$ac_cv_lib[]Name[]_prefix"
AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME)
AC_SUBST([LIB]NAME)
AC_SUBST([LTLIB]NAME)
- AC_SUBST([LIB]NAME[_PREFIX])
dnl Also set HAVE_LIB[]NAME so that AC_LIB_HAVE_LINKFLAGS can reuse the
dnl results of this search when this library appears as a dependency.
HAVE_LIB[]NAME=yes
dnl LTLIB${NAME} variables and augments the CPPFLAGS variable, and
dnl #defines HAVE_LIB${NAME} to 1. Otherwise, it sets and AC_SUBSTs
dnl HAVE_LIB${NAME}=no and LIB${NAME} and LTLIB${NAME} to empty.
-dnl Sets and AC_SUBSTs the LIB${NAME}_PREFIX variable to nonempty if libname
-dnl was found in ${LIB${NAME}_PREFIX}/$acl_libdirstem.
AC_DEFUN([AC_LIB_HAVE_LINKFLAGS],
[
AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
CPPFLAGS="$ac_save_CPPFLAGS"
LIB[]NAME=
LTLIB[]NAME=
- LIB[]NAME[]_PREFIX=
fi
AC_SUBST([HAVE_LIB]NAME)
AC_SUBST([LIB]NAME)
AC_SUBST([LTLIB]NAME)
- AC_SUBST([LIB]NAME[_PREFIX])
undefine([Name])
undefine([NAME])
])
dnl Determine the platform dependent parameters needed to use rpath:
-dnl acl_libext,
-dnl acl_shlibext,
-dnl acl_hardcode_libdir_flag_spec,
-dnl acl_hardcode_libdir_separator,
-dnl acl_hardcode_direct,
-dnl acl_hardcode_minus_L.
+dnl libext, shlibext, hardcode_libdir_flag_spec, hardcode_libdir_separator,
+dnl hardcode_direct, hardcode_minus_L.
AC_DEFUN([AC_LIB_RPATH],
[
dnl Tell automake >= 1.10 to complain if config.rpath is missing.
acl_cv_rpath=done
])
wl="$acl_cv_wl"
- acl_libext="$acl_cv_libext"
- acl_shlibext="$acl_cv_shlibext"
- acl_libname_spec="$acl_cv_libname_spec"
- acl_library_names_spec="$acl_cv_library_names_spec"
- acl_hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec"
- acl_hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator"
- acl_hardcode_direct="$acl_cv_hardcode_direct"
- acl_hardcode_minus_L="$acl_cv_hardcode_minus_L"
+ libext="$acl_cv_libext"
+ shlibext="$acl_cv_shlibext"
+ hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec"
+ hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator"
+ hardcode_direct="$acl_cv_hardcode_direct"
+ hardcode_minus_L="$acl_cv_hardcode_minus_L"
dnl Determine whether the user wants rpath handling at all.
AC_ARG_ENABLE(rpath,
[ --disable-rpath do not hardcode runtime library paths],
dnl AC_LIB_LINKFLAGS_BODY(name [, dependencies]) searches for libname and
dnl the libraries corresponding to explicit and implicit dependencies.
dnl Sets the LIB${NAME}, LTLIB${NAME} and INC${NAME} variables.
-dnl Also, sets the LIB${NAME}_PREFIX variable to nonempty if libname was found
-dnl in ${LIB${NAME}_PREFIX}/$acl_libdirstem.
AC_DEFUN([AC_LIB_LINKFLAGS_BODY],
[
AC_REQUIRE([AC_LIB_PREPARE_MULTILIB])
define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-],
[ABCDEFGHIJKLMNOPQRSTUVWXYZ___])])
- dnl Autoconf >= 2.61 supports dots in --with options.
- define([N_A_M_E],[m4_if(m4_version_compare(m4_defn([m4_PACKAGE_VERSION]),[2.61]),[-1],[translit([$1],[.],[_])],[$1])])
dnl By default, look in $includedir and $libdir.
use_additional=yes
AC_LIB_WITH_FINAL_PREFIX([
eval additional_includedir=\"$includedir\"
eval additional_libdir=\"$libdir\"
])
- AC_LIB_ARG_WITH([lib]N_A_M_E[-prefix],
-[ --with-lib]N_A_M_E[-prefix[=DIR] search for lib$1 in DIR/include and DIR/lib
- --without-lib]N_A_M_E[-prefix don't search for lib$1 in includedir and libdir],
+ AC_LIB_ARG_WITH([lib$1-prefix],
+[ --with-lib$1-prefix[=DIR] search for lib$1 in DIR/include and DIR/lib
+ --without-lib$1-prefix don't search for lib$1 in includedir and libdir],
[
if test "X$withval" = "Xno"; then
use_additional=no
LIB[]NAME=
LTLIB[]NAME=
INC[]NAME=
- LIB[]NAME[]_PREFIX=
rpathdirs=
ltrpathdirs=
names_already_handled=
found_la=
found_so=
found_a=
- eval libname=\"$acl_libname_spec\" # typically: libname=lib$name
- if test -n "$acl_shlibext"; then
- shrext=".$acl_shlibext" # typically: shrext=.so
- else
- shrext=
- fi
if test $use_additional = yes; then
- dir="$additional_libdir"
- dnl The same code as in the loop below:
- dnl First look for a shared library.
- if test -n "$acl_shlibext"; then
- if test -f "$dir/$libname$shrext"; then
- found_dir="$dir"
- found_so="$dir/$libname$shrext"
+ if test -n "$shlibext" \
+ && { test -f "$additional_libdir/lib$name.$shlibext" \
+ || { test "$shlibext" = dll \
+ && test -f "$additional_libdir/lib$name.dll.a"; }; }; then
+ found_dir="$additional_libdir"
+ if test -f "$additional_libdir/lib$name.$shlibext"; then
+ found_so="$additional_libdir/lib$name.$shlibext"
else
- if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then
- ver=`(cd "$dir" && \
- for f in "$libname$shrext".*; do echo "$f"; done \
- | sed -e "s,^$libname$shrext\\\\.,," \
- | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \
- | sed 1q ) 2>/dev/null`
- if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then
- found_dir="$dir"
- found_so="$dir/$libname$shrext.$ver"
- fi
- else
- eval library_names=\"$acl_library_names_spec\"
- for f in $library_names; do
- if test -f "$dir/$f"; then
- found_dir="$dir"
- found_so="$dir/$f"
- break
- fi
- done
- fi
+ found_so="$additional_libdir/lib$name.dll.a"
fi
- fi
- dnl Then look for a static library.
- if test "X$found_dir" = "X"; then
- if test -f "$dir/$libname.$acl_libext"; then
- found_dir="$dir"
- found_a="$dir/$libname.$acl_libext"
+ if test -f "$additional_libdir/lib$name.la"; then
+ found_la="$additional_libdir/lib$name.la"
fi
- fi
- if test "X$found_dir" != "X"; then
- if test -f "$dir/$libname.la"; then
- found_la="$dir/$libname.la"
+ else
+ if test -f "$additional_libdir/lib$name.$libext"; then
+ found_dir="$additional_libdir"
+ found_a="$additional_libdir/lib$name.$libext"
+ if test -f "$additional_libdir/lib$name.la"; then
+ found_la="$additional_libdir/lib$name.la"
+ fi
fi
fi
fi
case "$x" in
-L*)
dir=`echo "X$x" | sed -e 's/^X-L//'`
- dnl First look for a shared library.
- if test -n "$acl_shlibext"; then
- if test -f "$dir/$libname$shrext"; then
- found_dir="$dir"
- found_so="$dir/$libname$shrext"
+ if test -n "$shlibext" \
+ && { test -f "$dir/lib$name.$shlibext" \
+ || { test "$shlibext" = dll \
+ && test -f "$dir/lib$name.dll.a"; }; }; then
+ found_dir="$dir"
+ if test -f "$dir/lib$name.$shlibext"; then
+ found_so="$dir/lib$name.$shlibext"
else
- if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then
- ver=`(cd "$dir" && \
- for f in "$libname$shrext".*; do echo "$f"; done \
- | sed -e "s,^$libname$shrext\\\\.,," \
- | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \
- | sed 1q ) 2>/dev/null`
- if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then
- found_dir="$dir"
- found_so="$dir/$libname$shrext.$ver"
- fi
- else
- eval library_names=\"$acl_library_names_spec\"
- for f in $library_names; do
- if test -f "$dir/$f"; then
- found_dir="$dir"
- found_so="$dir/$f"
- break
- fi
- done
- fi
+ found_so="$dir/lib$name.dll.a"
fi
- fi
- dnl Then look for a static library.
- if test "X$found_dir" = "X"; then
- if test -f "$dir/$libname.$acl_libext"; then
- found_dir="$dir"
- found_a="$dir/$libname.$acl_libext"
+ if test -f "$dir/lib$name.la"; then
+ found_la="$dir/lib$name.la"
fi
- fi
- if test "X$found_dir" != "X"; then
- if test -f "$dir/$libname.la"; then
- found_la="$dir/$libname.la"
+ else
+ if test -f "$dir/lib$name.$libext"; then
+ found_dir="$dir"
+ found_a="$dir/lib$name.$libext"
+ if test -f "$dir/lib$name.la"; then
+ found_la="$dir/lib$name.la"
+ fi
fi
fi
;;
ltrpathdirs="$ltrpathdirs $found_dir"
fi
dnl The hardcoding into $LIBNAME is system dependent.
- if test "$acl_hardcode_direct" = yes; then
+ if test "$hardcode_direct" = yes; then
dnl Using DIR/libNAME.so during linking hardcodes DIR into the
dnl resulting binary.
LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
else
- if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then
+ if test -n "$hardcode_libdir_flag_spec" && test "$hardcode_minus_L" = no; then
dnl Use an explicit option to hardcode DIR into the resulting
dnl binary.
LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
if test -z "$haveit"; then
LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir"
fi
- if test "$acl_hardcode_minus_L" != no; then
+ if test "$hardcode_minus_L" != no; then
dnl FIXME: Not sure whether we should use
dnl "-L$found_dir -l$name" or "-L$found_dir $found_so"
dnl here.
LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
else
- dnl We cannot use $acl_hardcode_runpath_var and LD_RUN_PATH
+ dnl We cannot use $hardcode_runpath_var and LD_RUN_PATH
dnl here, because this doesn't fit in flags passed to the
dnl compiler. So give up. No hardcoding. This affects only
dnl very old systems.
case "$found_dir" in
*/$acl_libdirstem | */$acl_libdirstem/)
basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem/"'*$,,'`
- LIB[]NAME[]_PREFIX="$basedir"
additional_includedir="$basedir/include"
;;
esac
done
done
if test "X$rpathdirs" != "X"; then
- if test -n "$acl_hardcode_libdir_separator"; then
+ if test -n "$hardcode_libdir_separator"; then
dnl Weird platform: only the last -rpath option counts, the user must
dnl pass all path elements in one option. We can arrange that for a
dnl single library, but not when more than one $LIBNAMEs are used.
alldirs=
for found_dir in $rpathdirs; do
- alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$found_dir"
+ alldirs="${alldirs}${alldirs:+$hardcode_libdir_separator}$found_dir"
done
- dnl Note: acl_hardcode_libdir_flag_spec uses $libdir and $wl.
+ dnl Note: hardcode_libdir_flag_spec uses $libdir and $wl.
acl_save_libdir="$libdir"
libdir="$alldirs"
- eval flag=\"$acl_hardcode_libdir_flag_spec\"
+ eval flag=\"$hardcode_libdir_flag_spec\"
libdir="$acl_save_libdir"
LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag"
else
for found_dir in $rpathdirs; do
acl_save_libdir="$libdir"
libdir="$found_dir"
- eval flag=\"$acl_hardcode_libdir_flag_spec\"
+ eval flag=\"$hardcode_libdir_flag_spec\"
libdir="$acl_save_libdir"
LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag"
done
AC_REQUIRE([AC_LIB_PREPARE_MULTILIB])
$1=
if test "$enable_rpath" != no; then
- if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then
+ if test -n "$hardcode_libdir_flag_spec" && test "$hardcode_minus_L" = no; then
dnl Use an explicit option to hardcode directories into the resulting
dnl binary.
rpathdirs=
done
else
dnl The linker is used for linking directly.
- if test -n "$acl_hardcode_libdir_separator"; then
+ if test -n "$hardcode_libdir_separator"; then
dnl Weird platform: only the last -rpath option counts, the user
dnl must pass all path elements in one option.
alldirs=
for dir in $rpathdirs; do
- alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$dir"
+ alldirs="${alldirs}${alldirs:+$hardcode_libdir_separator}$dir"
done
acl_save_libdir="$libdir"
libdir="$alldirs"
- eval flag=\"$acl_hardcode_libdir_flag_spec\"
+ eval flag=\"$hardcode_libdir_flag_spec\"
libdir="$acl_save_libdir"
$1="$flag"
else
for dir in $rpathdirs; do
acl_save_libdir="$libdir"
libdir="$dir"
- eval flag=\"$acl_hardcode_libdir_flag_spec\"
+ eval flag=\"$hardcode_libdir_flag_spec\"
libdir="$acl_save_libdir"
$1="${$1}${$1:+ }$flag"
done
projects / vlc / blobdiff