#include "kdenlive-config.h"
#include "cliptranscode.h"
#include "ui_templateclip_ui.h"
+#include "vectorscope.h"
+#include "waveform.h"
+#include "rgbparade.h"
+#include "histogram.h"
#include <KApplication>
#include <KAction>
#include <KLocale>
#include <KGlobal>
#include <KActionCollection>
+#include <KActionCategory>
#include <KStandardAction>
+#include <KShortcutsDialog>
#include <KFileDialog>
#include <KMessageBox>
#include <KDebug>
EffectsList MainWindow::customEffects;
EffectsList MainWindow::transitions;
-MainWindow::MainWindow(const QString &MltPath, const KUrl & Url, QWidget *parent) :
- KXmlGuiWindow(parent),
- m_activeDocument(NULL),
- m_activeTimeline(NULL),
- m_renderWidget(NULL),
+MainWindow::MainWindow(const QString &MltPath, const KUrl & Url, const QString & clipsToLoad, QWidget *parent) :
+ KXmlGuiWindow(parent),
+ m_activeDocument(NULL),
+ m_activeTimeline(NULL),
+ m_renderWidget(NULL),
#ifndef NO_JOGSHUTTLE
- m_jogProcess(NULL),
+ m_jogProcess(NULL),
#endif /* NO_JOGSHUTTLE */
- m_findActivated(false)
+ m_findActivated(false)
{
// Create DBus interface
dbus.registerObject("/MainWindow", this);
setlocale(LC_NUMERIC, "POSIX");
- if (!KdenliveSettings::colortheme().isEmpty()) slotChangePalette(NULL, KdenliveSettings::colortheme());
+ if(!KdenliveSettings::colortheme().isEmpty()) slotChangePalette(NULL, KdenliveSettings::colortheme());
setFont(KGlobalSettings::toolBarFont());
parseProfiles(MltPath);
m_commandStack = new QUndoGroup;
m_timelineArea = new KTabWidget(this);
m_timelineArea->setTabReorderingEnabled(true);
m_timelineArea->setTabBarHidden(true);
+ m_timelineArea->setSizePolicy(QSizePolicy::Maximum, QSizePolicy::Preferred);
+ m_timelineArea->setMinimumHeight(200);
QToolButton *closeTabButton = new QToolButton;
connect(closeTabButton, SIGNAL(clicked()), this, SLOT(closeCurrentDocument()));
m_monitorManager = new MonitorManager();
- m_projectListDock = new QDockWidget(i18n("Project Tree"), this);
- m_projectListDock->setObjectName("project_tree");
- m_projectList = new ProjectList(this);
- m_projectListDock->setWidget(m_projectList);
- addDockWidget(Qt::TopDockWidgetArea, m_projectListDock);
-
m_shortcutRemoveFocus = new QShortcut(QKeySequence("Esc"), this);
connect(m_shortcutRemoveFocus, SIGNAL(activated()), this, SLOT(slotRemoveFocus()));
- m_effectListDock = new QDockWidget(i18n("Effect List"), this);
- m_effectListDock->setObjectName("effect_list");
- m_effectList = new EffectsListView();
-
- //m_effectList = new KListWidget(this);
- m_effectListDock->setWidget(m_effectList);
- addDockWidget(Qt::TopDockWidgetArea, m_effectListDock);
-
- m_effectStackDock = new QDockWidget(i18n("Effect Stack"), this);
- m_effectStackDock->setObjectName("effect_stack");
- m_effectStack = new EffectStackView(this);
- m_effectStackDock->setWidget(m_effectStack);
- addDockWidget(Qt::TopDockWidgetArea, m_effectStackDock);
-
- m_transitionConfigDock = new QDockWidget(i18n("Transition"), this);
- m_transitionConfigDock->setObjectName("transition");
- m_transitionConfig = new TransitionSettings(this);
- m_transitionConfigDock->setWidget(m_transitionConfig);
- addDockWidget(Qt::TopDockWidgetArea, m_transitionConfigDock);
- KdenliveSettings::setCurrent_profile(KdenliveSettings::default_profile());
- m_fileOpenRecent = KStandardAction::openRecent(this, SLOT(openFile(const KUrl &)), actionCollection());
- readOptions();
- m_fileRevert = KStandardAction::revert(this, SLOT(slotRevert()), actionCollection());
- m_fileRevert->setEnabled(false);
+ /// Add Widgets ///
- //slotDetectAudioDriver();
+ m_projectListDock = new QDockWidget(i18n("Project Tree"), this);
+ m_projectListDock->setObjectName("project_tree");
+ m_projectList = new ProjectList();
+ m_projectListDock->setWidget(m_projectList);
+ addDockWidget(Qt::TopDockWidgetArea, m_projectListDock);
m_clipMonitorDock = new QDockWidget(i18n("Clip Monitor"), this);
m_clipMonitorDock->setObjectName("clip_monitor");
- m_clipMonitor = new Monitor("clip", m_monitorManager, QString(), this);
+ m_clipMonitor = new Monitor("clip", m_monitorManager, QString());
m_clipMonitorDock->setWidget(m_clipMonitor);
addDockWidget(Qt::TopDockWidgetArea, m_clipMonitorDock);
- //m_clipMonitor->stop();
m_projectMonitorDock = new QDockWidget(i18n("Project Monitor"), this);
m_projectMonitorDock->setObjectName("project_monitor");
- m_projectMonitor = new Monitor("project", m_monitorManager, QString(), this);
+ m_projectMonitor = new Monitor("project", m_monitorManager, QString());
m_projectMonitorDock->setWidget(m_projectMonitor);
addDockWidget(Qt::TopDockWidgetArea, m_projectMonitorDock);
#ifndef Q_WS_MAC
m_recMonitorDock = new QDockWidget(i18n("Record Monitor"), this);
m_recMonitorDock->setObjectName("record_monitor");
- m_recMonitor = new RecMonitor("record", this);
+ m_recMonitor = new RecMonitor("record");
m_recMonitorDock->setWidget(m_recMonitor);
addDockWidget(Qt::TopDockWidgetArea, m_recMonitorDock);
-
connect(m_recMonitor, SIGNAL(addProjectClip(KUrl)), this, SLOT(slotAddProjectClip(KUrl)));
connect(m_recMonitor, SIGNAL(showConfigDialog(int, int)), this, SLOT(slotPreferences(int, int)));
#endif
+ m_effectStackDock = new QDockWidget(i18n("Effect Stack"), this);
+ m_effectStackDock->setObjectName("effect_stack");
+ m_effectStack = new EffectStackView(m_projectMonitor);
+ m_effectStackDock->setWidget(m_effectStack);
+ addDockWidget(Qt::TopDockWidgetArea, m_effectStackDock);
+
+ m_transitionConfigDock = new QDockWidget(i18n("Transition"), this);
+ m_transitionConfigDock->setObjectName("transition");
+ m_transitionConfig = new TransitionSettings(m_projectMonitor);
+ m_transitionConfigDock->setWidget(m_transitionConfig);
+ addDockWidget(Qt::TopDockWidgetArea, m_transitionConfigDock);
+
+ m_effectListDock = new QDockWidget(i18n("Effect List"), this);
+ m_effectListDock->setObjectName("effect_list");
+ m_effectList = new EffectsListView();
+ m_effectListDock->setWidget(m_effectList);
+ addDockWidget(Qt::TopDockWidgetArea, m_effectListDock);
+
+ m_vectorscope = new Vectorscope(m_projectMonitor, m_clipMonitor);
+ m_vectorscopeDock = new QDockWidget(i18n("Vectorscope"), this);
+ m_vectorscopeDock->setObjectName(m_vectorscope->widgetName());
+ m_vectorscopeDock->setWidget(m_vectorscope);
+ addDockWidget(Qt::TopDockWidgetArea, m_vectorscopeDock);
+ connect(m_vectorscopeDock, SIGNAL(visibilityChanged(bool)), m_vectorscope, SLOT(forceUpdate(bool)));
+ connect(m_vectorscopeDock, SIGNAL(visibilityChanged(bool)), this, SLOT(slotUpdateScopeFrameRequest()));
+ connect(m_vectorscope, SIGNAL(requestAutoRefresh(bool)), this, SLOT(slotUpdateScopeFrameRequest()));
+ m_scopesList.append(m_vectorscopeDock);
+
+ m_waveform = new Waveform(m_projectMonitor, m_clipMonitor);
+ m_waveformDock = new QDockWidget(i18n("Waveform"), this);
+ m_waveformDock->setObjectName(m_waveform->widgetName());
+ m_waveformDock->setWidget(m_waveform);
+ addDockWidget(Qt::TopDockWidgetArea, m_waveformDock);
+ connect(m_waveformDock, SIGNAL(visibilityChanged(bool)), m_waveform, SLOT(forceUpdate(bool)));
+ connect(m_waveformDock, SIGNAL(visibilityChanged(bool)), this, SLOT(slotUpdateScopeFrameRequest()));
+ connect(m_waveform, SIGNAL(requestAutoRefresh(bool)), this, SLOT(slotUpdateScopeFrameRequest()));
+ m_scopesList.append(m_waveformDock);
+
+ m_RGBParade = new RGBParade(m_projectMonitor, m_clipMonitor);
+ m_RGBParadeDock = new QDockWidget(i18n("RGB Parade"), this);
+ m_RGBParadeDock->setObjectName(m_RGBParade->widgetName());
+ m_RGBParadeDock->setWidget(m_RGBParade);
+ addDockWidget(Qt::TopDockWidgetArea, m_RGBParadeDock);
+ connect(m_RGBParadeDock, SIGNAL(visibilityChanged(bool)), m_RGBParade, SLOT(forceUpdate(bool)));
+ connect(m_RGBParadeDock, SIGNAL(visibilityChanged(bool)), this, SLOT(slotUpdateScopeFrameRequest()));
+ connect(m_RGBParade, SIGNAL(requestAutoRefresh(bool)), this, SLOT(slotUpdateScopeFrameRequest()));
+ m_scopesList.append(m_RGBParadeDock);
+
+ m_histogram = new Histogram(m_projectMonitor, m_clipMonitor);
+ m_histogramDock = new QDockWidget(i18n("Histogram"), this);
+ m_histogramDock->setObjectName(m_histogram->widgetName());
+ m_histogramDock->setWidget(m_histogram);
+ addDockWidget(Qt::TopDockWidgetArea, m_histogramDock);
+ connect(m_histogramDock, SIGNAL(visibilityChanged(bool)), m_histogram, SLOT(forceUpdate(bool)));
+ connect(m_histogramDock, SIGNAL(visibilityChanged(bool)), this, SLOT(slotUpdateScopeFrameRequest()));
+ connect(m_histogram, SIGNAL(requestAutoRefresh(bool)), this, SLOT(slotUpdateScopeFrameRequest()));
+ m_scopesList.append(m_histogramDock);
+
+
m_undoViewDock = new QDockWidget(i18n("Undo History"), this);
m_undoViewDock->setObjectName("undo_history");
- m_undoView = new QUndoView(this);
+ m_undoView = new QUndoView();
m_undoView->setCleanIcon(KIcon("edit-clear"));
m_undoView->setEmptyLabel(i18n("Clean"));
m_undoViewDock->setWidget(m_undoView);
//overviewDock->setWidget(m_overView);
//addDockWidget(Qt::TopDockWidgetArea, overviewDock);
+
setupActions();
- //tabifyDockWidget(projectListDock, effectListDock);
+
+ /// Tabify Widgets ///
tabifyDockWidget(m_projectListDock, m_effectStackDock);
tabifyDockWidget(m_projectListDock, m_transitionConfigDock);
- //tabifyDockWidget(projectListDock, undoViewDock);
tabifyDockWidget(m_clipMonitorDock, m_projectMonitorDock);
#ifndef Q_WS_MAC
tabifyDockWidget(m_clipMonitorDock, m_recMonitorDock);
#endif
+
+ tabifyDockWidget(m_vectorscopeDock, m_waveformDock);
+ tabifyDockWidget(m_vectorscopeDock, m_RGBParadeDock);
+ tabifyDockWidget(m_vectorscopeDock, m_histogramDock);
+ tabifyDockWidget(m_vectorscopeDock, m_undoViewDock);
+ tabifyDockWidget(m_vectorscopeDock, m_effectListDock);
+
+
setCentralWidget(m_timelineArea);
+
+
+ KdenliveSettings::setCurrent_profile(KdenliveSettings::default_profile());
+ m_fileOpenRecent = KStandardAction::openRecent(this, SLOT(openFile(const KUrl &)), actionCollection());
+ readOptions();
+ m_fileRevert = KStandardAction::revert(this, SLOT(slotRevert()), actionCollection());
+ m_fileRevert->setEnabled(false);
+
+ // Prepare layout actions
+ KActionCategory *layoutActions = new KActionCategory(i18n("Layouts"), actionCollection());
+ for(int i = 1; i < 5; i++) {
+ KAction *load = new KAction(KIcon(), i18n("Load Layout %1").arg(i), this);
+ load->setData("_" + QString::number(i));
+ layoutActions->addAction("load_layout" + QString::number(i), load);
+ KAction *save = new KAction(KIcon(), i18n("Save As Layout %1").arg(i), this);
+ save->setData("_" + QString::number(i));
+ layoutActions->addAction("save_layout" + QString::number(i), save);
+ }
+
setupGUI();
+
// Find QDockWidget tab bars and show / hide widget title bars on right click
QList <QTabBar *> tabs = findChildren<QTabBar *>();
- for (int i = 0; i < tabs.count(); i++) {
+ for(int i = 0; i < tabs.count(); i++) {
tabs.at(i)->setContextMenuPolicy(Qt::CustomContextMenu);
connect(tabs.at(i), SIGNAL(customContextMenuRequested(const QPoint &)), this, SLOT(slotSwitchTitles()));
}
/*ScriptingPart* sp = new ScriptingPart(this, QStringList());
guiFactory()->addClient(sp);*/
+
+ QMenu *loadLayout = (QMenu*)(factory()->container("layout_load", this));
+ if(loadLayout)
+ connect(loadLayout, SIGNAL(triggered(QAction*)), this, SLOT(slotLoadLayout(QAction*)));
+ QMenu *saveLayout = (QMenu*)(factory()->container("layout_save_as", this));
+ if(saveLayout)
+ connect(saveLayout, SIGNAL(triggered(QAction*)), this, SLOT(slotSaveLayout(QAction*)));
+
+
+ // Load layout names from config file
+ loadLayouts();
+
loadPlugins();
loadTranscoders();
//kDebug() << factory() << " " << factory()->container("video_effects_menu", this);
action = new KAction(i18n("Default"), this);
action->setCheckable(true);
themegroup->addAction(action);
- if (KdenliveSettings::colortheme().isEmpty()) action->setChecked(true);
+ if(KdenliveSettings::colortheme().isEmpty()) action->setChecked(true);
const QStringList schemeFiles = KGlobal::dirs()->findAllResources("data", "color-schemes/*.colors", KStandardDirs::NoDuplicates);
- for (int i = 0; i < schemeFiles.size(); ++i) {
+ for(int i = 0; i < schemeFiles.size(); ++i) {
// get the file name
const QString filename = schemeFiles.at(i);
const QFileInfo info(filename);
action->setIcon(icon);
action->setCheckable(true);
themegroup->addAction(action);
- if (KdenliveSettings::colortheme() == filename) action->setChecked(true);
+ if(KdenliveSettings::colortheme() == filename) action->setChecked(true);
}
/*KGlobal::dirs()->addResourceDir("themes", KStandardDirs::installPath("data") + QString("kdenlive/themes"));
// Setup and fill effects and transitions menus.
m_videoEffectsMenu = static_cast<QMenu*>(factory()->container("video_effects_menu", this));
- for (int i = 0; i < videoEffects.count(); ++i)
+ for(int i = 0; i < videoEffects.count(); ++i)
m_videoEffectsMenu->addAction(m_videoEffects[i]);
m_audioEffectsMenu = static_cast<QMenu*>(factory()->container("audio_effects_menu", this));
- for (int i = 0; i < audioEffects.count(); ++i)
+ for(int i = 0; i < audioEffects.count(); ++i)
m_audioEffectsMenu->addAction(m_audioEffects[i]);
m_customEffectsMenu = static_cast<QMenu*>(factory()->container("custom_effects_menu", this));
- if (customEffects.isEmpty())
+ if(customEffects.isEmpty())
m_customEffectsMenu->setEnabled(false);
else
m_customEffectsMenu->setEnabled(true);
- for (int i = 0; i < customEffects.count(); ++i)
+ for(int i = 0; i < customEffects.count(); ++i)
m_customEffectsMenu->addAction(m_customEffects[i]);
m_transitionsMenu = new QMenu(i18n("Add Transition"), this);
- for (int i = 0; i < transitions.count(); ++i)
+ for(int i = 0; i < transitions.count(); ++i)
m_transitionsMenu->addAction(m_transitions[i]);
connect(m_videoEffectsMenu, SIGNAL(triggered(QAction *)), this, SLOT(slotAddVideoEffect(QAction *)));
m_timelineContextMenu->addAction(actionCollection()->action(KStandardAction::name(KStandardAction::Paste)));
m_timelineContextClipMenu->addAction(actionCollection()->action("clip_in_project_tree"));
+ //m_timelineContextClipMenu->addAction(actionCollection()->action("clip_to_project_tree"));
m_timelineContextClipMenu->addAction(actionCollection()->action("edit_item_duration"));
m_timelineContextClipMenu->addAction(actionCollection()->action("delete_item"));
+ m_timelineContextClipMenu->addSeparator();
m_timelineContextClipMenu->addAction(actionCollection()->action("group_clip"));
m_timelineContextClipMenu->addAction(actionCollection()->action("ungroup_clip"));
+ m_timelineContextClipMenu->addAction(actionCollection()->action("split_audio"));
+ m_timelineContextClipMenu->addSeparator();
m_timelineContextClipMenu->addAction(actionCollection()->action("cut_timeline_clip"));
m_timelineContextClipMenu->addAction(actionCollection()->action(KStandardAction::name(KStandardAction::Copy)));
m_timelineContextClipMenu->addAction(actionCollection()->action("paste_effects"));
- m_timelineContextClipMenu->addAction(actionCollection()->action("split_audio"));
+ m_timelineContextClipMenu->addSeparator();
QMenu *markersMenu = (QMenu*)(factory()->container("marker_menu", this));
m_timelineContextClipMenu->addMenu(markersMenu);
+ m_timelineContextClipMenu->addSeparator();
m_timelineContextClipMenu->addMenu(m_transitionsMenu);
m_timelineContextClipMenu->addMenu(m_videoEffectsMenu);
m_timelineContextClipMenu->addMenu(m_audioEffectsMenu);
- //TODO: re-enable custom effects menu when it is implemented
m_timelineContextClipMenu->addMenu(m_customEffectsMenu);
m_timelineContextTransitionMenu->addAction(actionCollection()->action("edit_item_duration"));
connect(m_clipMonitorDock, SIGNAL(visibilityChanged(bool)), m_clipMonitor, SLOT(refreshMonitor(bool)));
//connect(m_monitorManager, SIGNAL(connectMonitors()), this, SLOT(slotConnectMonitors()));
connect(m_monitorManager, SIGNAL(raiseClipMonitor(bool)), this, SLOT(slotRaiseMonitor(bool)));
+ connect(m_monitorManager, SIGNAL(checkColorScopes()), this, SLOT(slotUpdateColorScopes()));
connect(m_effectList, SIGNAL(addEffect(const QDomElement)), this, SLOT(slotAddEffect(const QDomElement)));
connect(m_effectList, SIGNAL(reloadEffects()), this, SLOT(slotReloadEffects()));
// Open or create a file. Command line argument passed in Url has
// precedence, then "openlastproject", then just a plain empty file.
// If opening Url fails, openlastproject will _not_ be used.
- if (!Url.isEmpty()) {
+ if(!Url.isEmpty()) {
// delay loading so that the window shows up
m_startUrl = Url;
QTimer::singleShot(500, this, SLOT(openFile()));
- } else if (KdenliveSettings::openlastproject()) {
+ } else if(KdenliveSettings::openlastproject()) {
QTimer::singleShot(500, this, SLOT(openLastFile()));
} else { //if (m_timelineArea->count() == 0) {
newFile(false);
}
+ if(!clipsToLoad.isEmpty() && m_activeDocument) {
+ QStringList list = clipsToLoad.split(',');
+ QList <QUrl> urls;
+ foreach(QString path, list) {
+ kDebug() << QDir::current().absoluteFilePath(path);
+ urls << QUrl::fromLocalFile(QDir::current().absoluteFilePath(path));
+ }
+ m_projectList->slotAddClip(urls);
+ }
+
#ifndef NO_JOGSHUTTLE
activateShuttleDevice();
#endif /* NO_JOGSHUTTLE */
m_projectListDock->raise();
}
+MainWindow::~MainWindow()
+{
+ m_effectStack->slotClipItemSelected(NULL, 0);
+ m_transitionConfig->slotTransitionItemSelected(NULL, 0, QPoint(), false);
+
+ if(m_projectMonitor) m_projectMonitor->stop();
+ if(m_clipMonitor) m_clipMonitor->stop();
+
+ delete m_activeTimeline;
+ delete m_effectStack;
+ delete m_transitionConfig;
+ delete m_activeDocument;
+ delete m_projectMonitor;
+ delete m_clipMonitor;
+ delete m_shortcutRemoveFocus;
+ Mlt::Factory::close();
+}
+
void MainWindow::queryQuit()
{
- if (queryClose()) {
- if (m_projectMonitor) m_projectMonitor->stop();
- if (m_clipMonitor) m_clipMonitor->stop();
- delete m_effectStack;
- delete m_activeTimeline;
-#ifndef Q_WS_MAC
- // This sometimes causes crash on exit on OS X for some reason.
- delete m_projectMonitor;
- delete m_clipMonitor;
-#endif
- delete m_activeDocument;
- delete m_shortcutRemoveFocus;
- Mlt::Factory::close();
+ if(queryClose()) {
kapp->quit();
}
}
//virtual
bool MainWindow::queryClose()
{
- if (m_renderWidget) {
+ if(m_renderWidget) {
int waitingJobs = m_renderWidget->waitingJobsCount();
- if (waitingJobs > 0) {
- switch (KMessageBox::warningYesNoCancel(this, i18np("You have 1 rendering job waiting in the queue.\nWhat do you want to do with this job?", "You have %1 rendering jobs waiting in the queue.\nWhat do you want to do with these jobs?", waitingJobs), QString(), KGuiItem(i18n("Start them now")), KGuiItem(i18n("Delete them")))) {
+ if(waitingJobs > 0) {
+ switch(KMessageBox::warningYesNoCancel(this, i18np("You have 1 rendering job waiting in the queue.\nWhat do you want to do with this job?", "You have %1 rendering jobs waiting in the queue.\nWhat do you want to do with these jobs?", waitingJobs), QString(), KGuiItem(i18n("Start them now")), KGuiItem(i18n("Delete them")))) {
case KMessageBox::Yes :
// create script with waiting jobs and start it
- if (m_renderWidget->startWaitingRenderJobs() == false) return false;
+ if(m_renderWidget->startWaitingRenderJobs() == false) return false;
break;
case KMessageBox::No :
// Don't do anything, jobs will be deleted
}
}
saveOptions();
- if (m_monitorManager) m_monitorManager->stopActiveMonitor();
- if (m_activeDocument && m_activeDocument->isModified()) {
- switch (KMessageBox::warningYesNoCancel(this, i18n("Save changes to document?"))) {
+ if(m_monitorManager) m_monitorManager->stopActiveMonitor();
+ // warn the user to save if document is modified and we have clips in our project list
+ if(m_activeDocument && m_activeDocument->isModified() &&
+ ((m_projectList->documentClipList().isEmpty() && !m_activeDocument->url().isEmpty()) ||
+ !m_projectList->documentClipList().isEmpty())) {
+ raise();
+ activateWindow();
+ QString message;
+ if(m_activeDocument->url().fileName().isEmpty())
+ message = i18n("Save changes to document?");
+ else
+ message = i18n("The project <b>\"%1\"</b> has been changed.\nDo you want to save your changes?").arg(m_activeDocument->url().fileName());
+ switch(KMessageBox::warningYesNoCancel(this, message)) {
case KMessageBox::Yes :
// save document here. If saving fails, return false;
return saveFile();
return true;
}
-
void MainWindow::loadPlugins()
{
- foreach(QObject *plugin, QPluginLoader::staticInstances())
- populateMenus(plugin);
+ foreach(QObject * plugin, QPluginLoader::staticInstances()) {
+ populateMenus(plugin);
+ }
QStringList directories = KGlobal::dirs()->findDirs("module", QString());
QStringList filters;
filters << "libkdenlive*";
- foreach(const QString &folder, directories) {
- kDebug() << "// PARSING FIOLER: " << folder;
+ foreach(const QString & folder, directories) {
+ kDebug() << "Parsing plugin folder: " << folder;
QDir pluginsDir(folder);
- foreach(const QString &fileName, pluginsDir.entryList(filters, QDir::Files)) {
- kDebug() << "// FOUND PLUGIN: " << fileName << "= " << pluginsDir.absoluteFilePath(fileName);
- QPluginLoader loader(pluginsDir.absoluteFilePath(fileName));
- QObject *plugin = loader.instance();
- if (plugin) {
- populateMenus(plugin);
- m_pluginFileNames += fileName;
- } else kDebug() << "// ERROR LOADING PLUGIN: " << fileName << ", " << loader.errorString();
+ foreach(const QString & fileName,
+ pluginsDir.entryList(filters, QDir::Files)) {
+ /*
+ * Avoid loading the same plugin twice when there is more than one
+ * installation.
+ */
+ if(!m_pluginFileNames.contains(fileName)) {
+ kDebug() << "Found plugin: " << fileName;
+ QPluginLoader loader(pluginsDir.absoluteFilePath(fileName));
+ QObject *plugin = loader.instance();
+ if(plugin) {
+ populateMenus(plugin);
+ m_pluginFileNames += fileName;
+ } else
+ kDebug() << "Error loading plugin: " << fileName << ", " << loader.errorString();
+ }
}
}
- //exit(1);
}
void MainWindow::populateMenus(QObject *plugin)
{
QMenu *addMenu = static_cast<QMenu*>(factory()->container("generators", this));
ClipGenerator *iGenerator = qobject_cast<ClipGenerator *>(plugin);
- if (iGenerator)
+ if(iGenerator)
addToMenu(plugin, iGenerator->generators(KdenliveSettings::producerslist()), addMenu, SLOT(generateClip()),
NULL);
}
QActionGroup *actionGroup)
{
kDebug() << "// ADD to MENU" << texts;
- foreach(const QString &text, texts) {
+ foreach(const QString & text, texts) {
QAction *action = new QAction(text, plugin);
action->setData(text);
connect(action, SIGNAL(triggered()), this, member);
menu->addAction(action);
- if (actionGroup) {
+ if(actionGroup) {
action->setCheckable(true);
actionGroup->addAction(action);
}
QAction *action = qobject_cast<QAction *>(sender());
ClipGenerator *iGenerator = qobject_cast<ClipGenerator *>(action->parent());
- KUrl clipUrl = iGenerator->generatedClip(action->data().toString(), m_activeDocument->projectFolder(), QStringList(), QStringList(), 25, 720, 576);
- if (!clipUrl.isEmpty()) {
+ KUrl clipUrl = iGenerator->generatedClip(action->data().toString(), m_activeDocument->projectFolder(),
+ QStringList(), QStringList(), m_activeDocument->fps(), m_activeDocument->width(), m_activeDocument->height());
+ if(!clipUrl.isEmpty()) {
m_projectList->slotAddClip(QList <QUrl> () << clipUrl);
}
}
QAction *action;
QStringList effectInfo;
QMap<QString, QStringList> effectsList;
-
- for (int ix = 0; ix < customEffects.count(); ix++) {
+ for(int ix = 0; ix < customEffects.count(); ix++) {
effectInfo = customEffects.effectIdInfo(ix);
effectsList.insert(effectInfo.at(0).toLower(), effectInfo);
}
- if (effectsList.isEmpty()) {
+ if(effectsList.isEmpty())
m_customEffectsMenu->setEnabled(false);
- return;
- } else m_customEffectsMenu->setEnabled(true);
+ else
+ m_customEffectsMenu->setEnabled(true);
- foreach(const QStringList &value, effectsList) {
+ foreach(const QStringList & value, effectsList) {
action = new QAction(value.at(0), this);
action->setData(value);
m_customEffectsMenu->addAction(action);
{
delete m_jogProcess;
m_jogProcess = NULL;
- if (KdenliveSettings::enableshuttle() == false) return;
+ if(KdenliveSettings::enableshuttle() == false) return;
m_jogProcess = new JogShuttle(KdenliveSettings::shuttledevice());
connect(m_jogProcess, SIGNAL(rewind1()), m_monitorManager, SLOT(slotRewindOneFrame()));
connect(m_jogProcess, SIGNAL(forward1()), m_monitorManager, SLOT(slotForwardOneFrame()));
void MainWindow::slotShuttleButton(int code)
{
- switch (code) {
+ switch(code) {
case 5:
slotShuttleAction(KdenliveSettings::shuttle1());
break;
void MainWindow::slotShuttleAction(int code)
{
- switch (code) {
+ switch(code) {
case 0:
return;
case 1:
KToggleFullScreenAction::setFullScreen(this, actionCollection()->action("fullscreen")->isChecked());
}
-void MainWindow::slotAddEffect(const QDomElement effect, GenTime pos, int track)
+void MainWindow::slotAddEffect(const QDomElement effect)
{
- if (!m_activeDocument) return;
- if (effect.isNull()) {
+ if(!m_activeDocument) return;
+ if(effect.isNull()) {
kDebug() << "--- ERROR, TRYING TO APPEND NULL EFFECT";
return;
}
QDomElement effectToAdd = effect.cloneNode().toElement();
- m_activeTimeline->projectView()->slotAddEffect(effectToAdd, pos, track);
+ bool ok;
+ int ix = m_effectStack->isTrackMode(&ok);
+ if(ok) m_activeTimeline->projectView()->slotAddTrackEffect(effectToAdd, m_activeDocument->tracksCount() - ix);
+ else m_activeTimeline->projectView()->slotAddEffect(effectToAdd, GenTime(), -1);
}
void MainWindow::slotRaiseMonitor(bool clipMonitor)
{
- if (clipMonitor) m_clipMonitorDock->raise();
+ if(clipMonitor) m_clipMonitorDock->raise();
else m_projectMonitorDock->raise();
}
void MainWindow::slotUpdateClip(const QString &id)
{
- if (!m_activeDocument) return;
+ if(!m_activeDocument) return;
m_activeTimeline->projectView()->slotUpdateClip(id);
}
connect(m_clipMonitor, SIGNAL(adjustMonitorSize()), this, SLOT(slotAdjustClipMonitor()));
connect(m_projectMonitor, SIGNAL(adjustMonitorSize()), this, SLOT(slotAdjustProjectMonitor()));
+ connect(m_projectMonitor, SIGNAL(requestFrameForAnalysis(bool)), this, SLOT(slotMonitorRequestRenderFrame(bool)));
+
connect(m_clipMonitor, SIGNAL(saveZone(Render *, QPoint)), this, SLOT(slotSaveZone(Render *, QPoint)));
connect(m_projectMonitor, SIGNAL(saveZone(Render *, QPoint)), this, SLOT(slotSaveZone(Render *, QPoint)));
}
m_timecodeFormat = new KComboBox(this);
m_timecodeFormat->addItem(i18n("hh:mm:ss::ff"));
m_timecodeFormat->addItem(i18n("Frames"));
- if (KdenliveSettings::frametimecode()) m_timecodeFormat->setCurrentIndex(1);
+ if(KdenliveSettings::frametimecode()) m_timecodeFormat->setCurrentIndex(1);
connect(m_timecodeFormat, SIGNAL(activated(int)), this, SLOT(slotUpdateTimecodeFormat(int)));
m_statusProgressBar = new QProgressBar(this);
KToolBar *toolbar = new KToolBar("statusToolBar", this, Qt::BottomToolBarArea);
toolbar->setMovable(false);
+ KColorScheme scheme(palette().currentColorGroup(), KColorScheme::Window, KSharedConfig::openConfig(KdenliveSettings::colortheme()));
+ QColor buttonBg = scheme.background(KColorScheme::LinkBackground).color();
+ QColor buttonBord = scheme.foreground(KColorScheme::LinkText).color();
+ QColor buttonBord2 = scheme.shade(KColorScheme::LightShade);
statusBar()->setStyleSheet(QString("QStatusBar QLabel {font-size:%1pt;} QStatusBar::item { border: 0px; font-size:%1pt;padding:0px; }").arg(statusBar()->font().pointSize()));
- QString style1 = "QToolBar { border: 0px } QToolButton { border-style: inset; border:1px solid #999999;border-radius: 3px;margin: 0px 3px;padding: 0px;} QToolButton:checked { background-color: rgba(224, 224, 0, 100); border-style: inset; border:1px solid #cc6666;border-radius: 3px;}";
+ QString style1 = QString("QToolBar { border: 0px } QToolButton { border-style: inset; border:1px solid transparent;border-radius: 3px;margin: 0px 3px;padding: 0px;} QToolButton:hover { background: rgb(%7, %8, %9);border-style: inset; border:1px solid rgb(%7, %8, %9);border-radius: 3px;} QToolButton:checked { background-color: rgb(%1, %2, %3); border-style: inset; border:1px solid rgb(%4, %5, %6);border-radius: 3px;}").arg(buttonBg.red()).arg(buttonBg.green()).arg(buttonBg.blue()).arg(buttonBord.red()).arg(buttonBord.green()).arg(buttonBord.blue()).arg(buttonBord2.red()).arg(buttonBord2.green()).arg(buttonBord2.blue());
QString styleBorderless = "QToolButton { border-width: 0px;margin: 1px 3px 0px;padding: 0px;}";
//create edit mode buttons
toolbar->addSeparator();
+ //create automatic audio split button
+ m_buttonAutomaticSplitAudio = new KAction(KIcon("kdenlive-split-audio"), i18n("Split audio and video automatically"), this);
+ toolbar->addAction(m_buttonAutomaticSplitAudio);
+ m_buttonAutomaticSplitAudio->setCheckable(true);
+ m_buttonAutomaticSplitAudio->setChecked(KdenliveSettings::splitaudio());
+ connect(m_buttonAutomaticSplitAudio, SIGNAL(triggered()), this, SLOT(slotSwitchSplitAudio()));
+
m_buttonVideoThumbs = new KAction(KIcon("kdenlive-show-videothumb"), i18n("Show video thumbnails"), this);
toolbar->addAction(m_buttonVideoThumbs);
m_buttonVideoThumbs->setCheckable(true);
m_buttonSnap->setChecked(KdenliveSettings::snaptopoints());
connect(m_buttonSnap, SIGNAL(triggered()), this, SLOT(slotSwitchSnap()));
+ actionWidget = toolbar->widgetForAction(m_buttonAutomaticSplitAudio);
+ actionWidget->setMaximumWidth(max);
+ actionWidget->setMaximumHeight(max - 4);
+
actionWidget = toolbar->widgetForAction(m_buttonVideoThumbs);
actionWidget->setMaximumWidth(max);
actionWidget->setMaximumHeight(max - 4);
collection->addAction("razor_tool", m_buttonRazorTool);
collection->addAction("spacer_tool", m_buttonSpacerTool);
+ collection->addAction("automatic_split_audio", m_buttonAutomaticSplitAudio);
collection->addAction("show_video_thumbs", m_buttonVideoThumbs);
collection->addAction("show_audio_thumbs", m_buttonAudioThumbs);
collection->addAction("show_markers", m_buttonShowMarkers);
collection->addAction("manage_profiles", profilesAction);
connect(profilesAction, SIGNAL(triggered(bool)), this, SLOT(slotEditProfiles()));
- KNS3::standardAction(i18n("Download New Wipes..."), this, SLOT(slotGetNewLumaStuff()), actionCollection(), "get_new_lumas");
-
- KNS3::standardAction(i18n("Download New Render Profiles..."), this, SLOT(slotGetNewRenderStuff()), actionCollection(), "get_new_profiles");
-
+ KNS3::standardAction(i18n("Download New Wipes..."), this, SLOT(slotGetNewLumaStuff()), actionCollection(), "get_new_lumas");
+ KNS3::standardAction(i18n("Download New Render Profiles..."), this, SLOT(slotGetNewRenderStuff()), actionCollection(), "get_new_profiles");
KNS3::standardAction(i18n("Download New Project Profiles..."), this, SLOT(slotGetNewMltProfileStuff()), actionCollection(), "get_new_mlt_profiles");
-
- KNS3::standardAction(i18n("Download New Title Templates..."), this, SLOT(slotGetNewTitleStuff()), actionCollection(), "get_new_titles");
+ KNS3::standardAction(i18n("Download New Title Templates..."), this, SLOT(slotGetNewTitleStuff()), actionCollection(), "get_new_titles");
KAction* wizAction = new KAction(KIcon("configure"), i18n("Run Config Wizard"), this);
collection->addAction("run_wizard", wizAction);
collection->addAction("clip_in_project_tree", clipInProjectTree);
connect(clipInProjectTree, SIGNAL(triggered(bool)), this, SLOT(slotClipInProjectTree()));
+ /*KAction* clipToProjectTree = new KAction(KIcon("go-jump-definition"), i18n("Add Clip to Project Tree"), this);
+ collection->addAction("clip_to_project_tree", clipToProjectTree);
+ connect(clipToProjectTree, SIGNAL(triggered(bool)), this, SLOT(slotClipToProjectTree()));*/
+
KAction* insertOvertwrite = new KAction(KIcon(), i18n("Insert Clip Zone in Timeline (Overwrite)"), this);
insertOvertwrite->setShortcut(Qt::Key_V);
collection->addAction("overwrite_to_in_point", insertOvertwrite);
collection->addAction("delete_track", deleteTrack);
connect(deleteTrack, SIGNAL(triggered()), this, SLOT(slotDeleteTrack()));
- KAction *changeTrack = new KAction(KIcon(), i18n("Change Track"), this);
- collection->addAction("change_track", changeTrack);
- connect(changeTrack, SIGNAL(triggered()), this, SLOT(slotChangeTrack()));
+ KAction *configTracks = new KAction(KIcon("configure"), i18n("Configure Tracks"), this);
+ collection->addAction("config_tracks", configTracks);
+ connect(configTracks, SIGNAL(triggered()), this, SLOT(slotConfigTrack()));
KAction *addGuide = new KAction(KIcon("document-new"), i18n("Add Guide"), this);
collection->addAction("add_guide", addGuide);
showTitleBar->setChecked(KdenliveSettings::showtitlebars());
slotShowTitleBars(KdenliveSettings::showtitlebars());
+
+ //const QByteArray state = layoutGroup.readEntry("layout1", QByteArray());
+
/*QAction *maxCurrent = new KAction(i18n("Maximize Current Widget"), this);
collection->addAction("maximize_current", maxCurrent);
maxCurrent->setCheckable(true);
maxCurrent->setChecked(false);
connect(maxCurrent, SIGNAL(triggered(bool)), this, SLOT(slotMaximizeCurrent(bool)));*/
-
- m_closeAction = KStandardAction::close(this, SLOT(closeCurrentDocument()), collection);
-
- KStandardAction::quit(this, SLOT(queryQuit()), collection);
-
- KStandardAction::open(this, SLOT(openFile()), collection);
-
- m_saveAction = KStandardAction::save(this, SLOT(saveFile()), collection);
-
- KStandardAction::saveAs(this, SLOT(saveFileAs()), collection);
-
- KStandardAction::openNew(this, SLOT(newFile()), collection);
-
- KStandardAction::preferences(this, SLOT(slotPreferences()), collection);
-
- KStandardAction::configureNotifications(this , SLOT(configureNotifications()), collection);
-
- KStandardAction::copy(this, SLOT(slotCopy()), collection);
-
- KStandardAction::paste(this, SLOT(slotPaste()), collection);
+ m_closeAction = KStandardAction::close(this, SLOT(closeCurrentDocument()), collection);
+ KStandardAction::quit(this, SLOT(queryQuit()), collection);
+ KStandardAction::open(this, SLOT(openFile()), collection);
+ m_saveAction = KStandardAction::save(this, SLOT(saveFile()), collection);
+ KStandardAction::saveAs(this, SLOT(saveFileAs()), collection);
+ KStandardAction::openNew(this, SLOT(newFile()), collection);
+ // TODO: make the following connection to slotEditKeys work
+ KStandardAction::keyBindings(this, SLOT(slotEditKeys()), collection);
+ KStandardAction::preferences(this, SLOT(slotPreferences()), collection);
+ KStandardAction::configureNotifications(this, SLOT(configureNotifications()), collection);
+ KStandardAction::copy(this, SLOT(slotCopy()), collection);
+ KStandardAction::paste(this, SLOT(slotPaste()), collection);
+ KStandardAction::fullScreen(this, SLOT(slotFullScreen()), this, collection);
KAction *undo = KStandardAction::undo(m_commandStack, SLOT(undo()), collection);
undo->setEnabled(false);
redo->setEnabled(false);
connect(m_commandStack, SIGNAL(canRedoChanged(bool)), redo, SLOT(setEnabled(bool)));
- KStandardAction::fullScreen(this, SLOT(slotFullScreen()), this, collection);
-
/*
//TODO: Add status tooltip to actions ?
connect(collection, SIGNAL(actionHovered(QAction*)),
m_projectList->setupMenu(addClips, addClip);
// Setup effects and transitions actions.
+ m_effectsActionCollection = new KActionCollection(this, KGlobal::mainComponent());
+ //KActionCategory *videoEffectActions = new KActionCategory(i18n("Video Effects"), m_effectsActionCollection);
+ KActionCategory *videoEffectActions = new KActionCategory(i18n("Video Effects"), collection);
m_videoEffects = new KAction*[videoEffects.count()];
- for (int i = 0; i < videoEffects.count(); ++i) {
+ for(int i = 0; i < videoEffects.count(); ++i) {
QStringList effectInfo = videoEffects.effectIdInfo(i);
m_videoEffects[i] = new KAction(KIcon("kdenlive-show-video"), effectInfo.at(0), this);
m_videoEffects[i]->setData(effectInfo);
m_videoEffects[i]->setIconVisibleInMenu(false);
- collection->addAction("video_effect_" + effectInfo.at(0), m_videoEffects[i]);
+ videoEffectActions->addAction("video_effect_" + effectInfo.at(0), m_videoEffects[i]);
}
+ //KActionCategory *audioEffectActions = new KActionCategory(i18n("Audio Effects"), m_effectsActionCollection);
+ KActionCategory *audioEffectActions = new KActionCategory(i18n("Audio Effects"), collection);
m_audioEffects = new KAction*[audioEffects.count()];
- for (int i = 0; i < audioEffects.count(); ++i) {
+ for(int i = 0; i < audioEffects.count(); ++i) {
QStringList effectInfo = audioEffects.effectIdInfo(i);
m_audioEffects[i] = new KAction(KIcon("kdenlive-show-audio"), effectInfo.at(0), this);
m_audioEffects[i]->setData(effectInfo);
m_audioEffects[i]->setIconVisibleInMenu(false);
- collection->addAction("audio_effect_" + effectInfo.at(0), m_audioEffects[i]);
+ audioEffectActions->addAction("audio_effect_" + effectInfo.at(0), m_audioEffects[i]);
}
+ //KActionCategory *customEffectActions = new KActionCategory(i18n("Custom Effects"), m_effectsActionCollection);
+ KActionCategory *customEffectActions = new KActionCategory(i18n("Custom Effects"), collection);
m_customEffects = new KAction*[customEffects.count()];
- for (int i = 0; i < customEffects.count(); ++i) {
+ for(int i = 0; i < customEffects.count(); ++i) {
QStringList effectInfo = customEffects.effectIdInfo(i);
m_customEffects[i] = new KAction(KIcon("kdenlive-custom-effect"), effectInfo.at(0), this);
m_customEffects[i]->setData(effectInfo);
m_customEffects[i]->setIconVisibleInMenu(false);
- collection->addAction("custom_effect_" + effectInfo.at(0), m_customEffects[i]);
+ customEffectActions->addAction("custom_effect_" + effectInfo.at(0), m_customEffects[i]);
}
+ //KActionCategory *transitionActions = new KActionCategory(i18n("Transitions"), m_effectsActionCollection);
+ KActionCategory *transitionActions = new KActionCategory(i18n("Transitions"), collection);
m_transitions = new KAction*[transitions.count()];
- for (int i = 0; i < transitions.count(); i++) {
+ for(int i = 0; i < transitions.count(); i++) {
QStringList effectInfo = transitions.effectIdInfo(i);
m_transitions[i] = new KAction(effectInfo.at(0), this);
m_transitions[i]->setData(effectInfo);
m_transitions[i]->setIconVisibleInMenu(false);
- collection->addAction("transition_" + effectInfo.at(0), m_transitions[i]);
+ transitionActions->addAction("transition_" + effectInfo.at(0), m_transitions[i]);
}
+ m_effectsActionCollection->readSettings();
//connect(collection, SIGNAL( clearStatusText() ),
//statusBar(), SLOT( clear() ) );
statusBar()->showMessage(a->data().toString(), 3000);
}
+void MainWindow::loadLayouts()
+{
+ QMenu *saveLayout = (QMenu*)(factory()->container("layout_save_as", this));
+ QMenu *loadLayout = (QMenu*)(factory()->container("layout_load", this));
+ if(loadLayout == NULL || saveLayout == NULL) return;
+ KSharedConfigPtr config = KGlobal::config();
+ KConfigGroup layoutGroup(config, "Layouts");
+ QStringList entries = layoutGroup.keyList();
+ QList<QAction *> loadActions = loadLayout->actions();
+ QList<QAction *> saveActions = saveLayout->actions();
+ for(int i = 1; i < 5; i++) {
+ // Rename the layouts actions
+ foreach(const QString & key, entries) {
+ if(key.endsWith(QString("_%1").arg(i))) {
+ // Found previously saved layout
+ QString layoutName = key.section("_", 0, -2);
+ for(int j = 0; j < loadActions.count(); j++) {
+ if(loadActions.at(j)->data().toString().endsWith("_" + QString::number(i))) {
+ loadActions[j]->setText(layoutName);
+ loadActions[j]->setData(key);
+ break;
+ }
+ }
+ for(int j = 0; j < saveActions.count(); j++) {
+ if(saveActions.at(j)->data().toString().endsWith("_" + QString::number(i))) {
+ saveActions[j]->setText(layoutName);
+ saveActions[j]->setData(key);
+ break;
+ }
+ }
+ }
+ }
+ }
+}
+
+void MainWindow::slotLoadLayout(QAction *action)
+{
+ if(!action) return;
+ QString layoutId = action->data().toString();
+ if(layoutId.isEmpty()) return;
+ KSharedConfigPtr config = KGlobal::config();
+ KConfigGroup layouts(config, "Layouts");
+ //QByteArray geom = QByteArray::fromBase64(layouts.readEntry(layoutId).toAscii());
+ QByteArray state = QByteArray::fromBase64(layouts.readEntry(layoutId).toAscii());
+ //restoreGeometry(geom);
+ restoreState(state);
+}
+
+void MainWindow::slotSaveLayout(QAction *action)
+{
+ QString originallayoutName = action->data().toString();
+ int layoutId = originallayoutName.section('_', -1).toInt();
+
+ QString layoutName = QInputDialog::getText(this, i18n("Save Layout"), i18n("Layout name:"), QLineEdit::Normal, originallayoutName.section('_', 0, -2));
+ if(layoutName.isEmpty()) return;
+ KSharedConfigPtr config = KGlobal::config();
+ KConfigGroup layouts(config, "Layouts");
+ layouts.deleteEntry(originallayoutName);
+
+ QByteArray st = saveState();
+ layoutName.append("_" + QString::number(layoutId));
+ layouts.writeEntry(layoutName, st.toBase64());
+ loadLayouts();
+}
+
void MainWindow::saveOptions()
{
KdenliveSettings::self()->writeConfig();
m_fileOpenRecent->loadEntries(KConfigGroup(config, "Recent Files"));
KConfigGroup initialGroup(config, "version");
bool upgrade = false;
- if (initialGroup.exists()) {
- if (initialGroup.readEntry("version", QString()).section(' ', 0, 0) != QString(version).section(' ', 0, 0)) {
+ if(initialGroup.exists()) {
+ if(initialGroup.readEntry("version", QString()).section(' ', 0, 0) != QString(version).section(' ', 0, 0)) {
upgrade = true;
}
- if (initialGroup.readEntry("version") == "0.7") {
+ if(initialGroup.readEntry("version") == "0.7") {
//Add new settings from 0.7.1
- if (KdenliveSettings::defaultprojectfolder().isEmpty()) {
+ if(KdenliveSettings::defaultprojectfolder().isEmpty()) {
QString path = QDir::homePath() + "/kdenlive";
- if (KStandardDirs::makeDir(path) == false) {
+ if(KStandardDirs::makeDir(path) == false) {
kDebug() << "/// ERROR CREATING PROJECT FOLDER: " << path;
} else KdenliveSettings::setDefaultprojectfolder(path);
}
}
- if (!initialGroup.exists() || upgrade) {
+ if(!initialGroup.exists() || upgrade) {
// this is our first run, show Wizard
Wizard *w = new Wizard(upgrade, this);
- if (w->exec() == QDialog::Accepted && w->isOk()) {
+ if(w->exec() == QDialog::Accepted && w->isOk()) {
w->adjustSettings();
initialGroup.writeEntry("version", version);
delete w;
}
KConfigGroup treecolumns(config, "Project Tree");
const QByteArray state = treecolumns.readEntry("columns", QByteArray());
- if (!state.isEmpty())
+ if(!state.isEmpty())
m_projectList->setHeaderInfo(state);
}
void MainWindow::slotRunWizard()
{
Wizard *w = new Wizard(false, this);
- if (w->exec() == QDialog::Accepted && w->isOk()) {
+ if(w->exec() == QDialog::Accepted && w->isOk()) {
w->adjustSettings();
}
delete w;
void MainWindow::newFile(bool showProjectSettings, bool force)
{
- if (!m_timelineArea->isEnabled() && !force) return;
+ if(!m_timelineArea->isEnabled() && !force)
+ return;
m_fileRevert->setEnabled(false);
- QString profileName;
- KUrl projectFolder;
+ QString profileName = KdenliveSettings::default_profile();
+ KUrl projectFolder = KdenliveSettings::defaultprojectfolder();
QPoint projectTracks(KdenliveSettings::videotracks(), KdenliveSettings::audiotracks());
- if (!showProjectSettings) {
- if (!KdenliveSettings::activatetabs()) closeCurrentDocument();
- profileName = KdenliveSettings::default_profile();
- projectFolder = KdenliveSettings::defaultprojectfolder();
+ if(!showProjectSettings) {
+ if(!KdenliveSettings::activatetabs())
+ if(!closeCurrentDocument())
+ return;
} else {
ProjectSettings *w = new ProjectSettings(NULL, QStringList(), projectTracks.x(), projectTracks.y(), KdenliveSettings::defaultprojectfolder(), false, true, this);
- if (w->exec() != QDialog::Accepted) return;
- if (!KdenliveSettings::activatetabs()) closeCurrentDocument();
- if (KdenliveSettings::videothumbnails() != w->enableVideoThumbs()) slotSwitchVideoThumbs();
- if (KdenliveSettings::audiothumbnails() != w->enableAudioThumbs()) slotSwitchAudioThumbs();
+ if(w->exec() != QDialog::Accepted)
+ return;
+ if(!KdenliveSettings::activatetabs())
+ if(!closeCurrentDocument())
+ return;
+ if(KdenliveSettings::videothumbnails() != w->enableVideoThumbs())
+ slotSwitchVideoThumbs();
+ if(KdenliveSettings::audiothumbnails() != w->enableAudioThumbs())
+ slotSwitchAudioThumbs();
profileName = w->selectedProfile();
projectFolder = w->selectedFolder();
projectTracks = w->tracks();
bool ok;
TrackView *trackView = new TrackView(doc, &ok, this);
m_timelineArea->addTab(trackView, KIcon("kdenlive"), doc->description());
- if (!ok) {
+ if(!ok) {
// MLT is broken
//m_timelineArea->setEnabled(false);
//m_projectList->setEnabled(false);
slotPreferences(6);
return;
}
- if (m_timelineArea->count() == 1) {
+ if(m_timelineArea->count() == 1) {
connectDocumentInfo(doc);
connectDocument(trackView, doc);
- } else m_timelineArea->setTabBarHidden(false);
+ } else
+ m_timelineArea->setTabBarHidden(false);
m_monitorManager->activateMonitor("clip");
m_closeAction->setEnabled(m_timelineArea->count() > 1);
}
void MainWindow::activateDocument()
{
- if (m_timelineArea->currentWidget() == NULL || !m_timelineArea->isEnabled()) return;
+ if(m_timelineArea->currentWidget() == NULL || !m_timelineArea->isEnabled()) return;
TrackView *currentTab = (TrackView *) m_timelineArea->currentWidget();
KdenliveDoc *currentDoc = currentTab->document();
connectDocumentInfo(currentDoc);
connectDocument(currentTab, currentDoc);
}
-void MainWindow::closeCurrentDocument(bool saveChanges)
+bool MainWindow::closeCurrentDocument(bool saveChanges)
{
QWidget *w = m_timelineArea->currentWidget();
- if (!w) return;
+ if(!w) return true;
// closing current document
int ix = m_timelineArea->currentIndex() + 1;
- if (ix == m_timelineArea->count()) ix = 0;
+ if(ix == m_timelineArea->count()) ix = 0;
m_timelineArea->setCurrentIndex(ix);
TrackView *tabToClose = (TrackView *) w;
KdenliveDoc *docToClose = tabToClose->document();
- if (docToClose && docToClose->isModified() && saveChanges) {
- switch (KMessageBox::warningYesNoCancel(this, i18n("Save changes to document?"))) {
+ if(docToClose && docToClose->isModified() && saveChanges) {
+ QString message;
+ if(m_activeDocument->url().fileName().isEmpty())
+ message = i18n("Save changes to document?");
+ else
+ message = i18n("The project <b>\"%1\"</b> has been changed.\nDo you want to save your changes?").arg(m_activeDocument->url().fileName());
+ switch(KMessageBox::warningYesNoCancel(this, message)) {
case KMessageBox::Yes :
// save document here. If saving fails, return false;
- if (saveFile() == false) return;
+ if(saveFile() == false) return false;
break;
case KMessageBox::Cancel :
- return;
+ return false;
break;
default:
break;
}
m_clipMonitor->slotSetXml(NULL);
m_timelineArea->removeTab(m_timelineArea->indexOf(w));
- if (m_timelineArea->count() == 1) {
+ if(m_timelineArea->count() == 1) {
m_timelineArea->setTabBarHidden(true);
m_closeAction->setEnabled(false);
}
- if (docToClose == m_activeDocument) {
+ if(docToClose == m_activeDocument) {
delete m_activeDocument;
m_activeDocument = NULL;
m_effectStack->clear();
m_transitionConfig->slotTransitionItemSelected(NULL, 0, QPoint(), false);
- } else delete docToClose;
- if (w == m_activeTimeline) {
+ } else {
+ delete docToClose;
+ }
+ if(w == m_activeTimeline) {
delete m_activeTimeline;
m_activeTimeline = NULL;
- } else delete w;
+ } else {
+ delete w;
+ }
+ return true;
}
bool MainWindow::saveFileAs(const QString &outputFileName)
{
QString currentSceneList;
m_monitorManager->stopActiveMonitor();
- if (KdenliveSettings::dropbframes()) {
+ if(KdenliveSettings::dropbframes()) {
KdenliveSettings::setDropbframes(false);
m_activeDocument->clipManager()->updatePreviewSettings();
currentSceneList = m_projectMonitor->sceneList();
m_activeDocument->clipManager()->updatePreviewSettings();
} else currentSceneList = m_projectMonitor->sceneList();
- if (m_activeDocument->saveSceneList(outputFileName, currentSceneList) == false)
+ if(m_activeDocument->saveSceneList(outputFileName, currentSceneList) == false)
return false;
// Save timeline thumbnails
m_activeTimeline->projectView()->saveThumbnails();
m_activeDocument->setUrl(KUrl(outputFileName));
- if (m_activeDocument->m_autosave == NULL) {
+ if(m_activeDocument->m_autosave == NULL) {
m_activeDocument->m_autosave = new KAutoSaveFile(KUrl(outputFileName), this);
} else m_activeDocument->m_autosave->setManagedFile(KUrl(outputFileName));
setCaption(m_activeDocument->description());
bool MainWindow::saveFileAs()
{
- QString outputFile = KFileDialog::getSaveFileName(KUrl(), getMimeType());
- if (outputFile.isEmpty()) return false;
- if (QFile::exists(outputFile)) {
+ QString outputFile = KFileDialog::getSaveFileName(m_activeDocument->projectFolder(), getMimeType());
+ if(outputFile.isEmpty()) {
+ return false;
+ }
+ if(QFile::exists(outputFile)) {
// Show the file dialog again if the user does not want to overwrite the file
- if (KMessageBox::questionYesNo(this, i18n("File already exists.\nDo you want to overwrite it?")) == KMessageBox::No)
+ if(KMessageBox::questionYesNo(this, i18n("File %1 already exists.\nDo you want to overwrite it?", outputFile)) == KMessageBox::No)
return saveFileAs();
}
return saveFileAs(outputFile);
bool MainWindow::saveFile()
{
- if (!m_activeDocument) return true;
- if (m_activeDocument->url().isEmpty()) {
+ if(!m_activeDocument) return true;
+ if(m_activeDocument->url().isEmpty()) {
return saveFileAs();
} else {
bool result = saveFileAs(m_activeDocument->url().path());
void MainWindow::openFile()
{
- if (!m_startUrl.isEmpty()) {
+ if(!m_startUrl.isEmpty()) {
openFile(m_startUrl);
m_startUrl = KUrl();
return;
}
KUrl url = KFileDialog::getOpenUrl(KUrl("kfiledialog:///projectfolder"), getMimeType());
- if (url.isEmpty()) return;
+ if(url.isEmpty()) return;
m_fileOpenRecent->addUrl(url);
openFile(url);
}
KSharedConfigPtr config = KGlobal::config();
KUrl::List urls = m_fileOpenRecent->urls();
//WARNING: this is buggy, we get a random url, not the last one. Bug in KRecentFileAction?
- if (urls.isEmpty()) newFile(false);
+ if(urls.isEmpty()) newFile(false);
else openFile(urls.last());
}
const int ct = m_timelineArea->count();
bool isOpened = false;
int i;
- for (i = 0; i < ct; i++) {
+ for(i = 0; i < ct; i++) {
TrackView *tab = (TrackView *) m_timelineArea->widget(i);
KdenliveDoc *doc = tab->document();
- if (doc->url() == url) {
+ if(doc->url() == url) {
isOpened = true;
break;
}
}
- if (isOpened) {
+ if(isOpened) {
m_timelineArea->setCurrentIndex(i);
return;
}
+ if(!KdenliveSettings::activatetabs()) if(!closeCurrentDocument()) return;
+
// Check for backup file
QList<KAutoSaveFile *> staleFiles = KAutoSaveFile::staleFiles(url);
- if (!staleFiles.isEmpty()) {
- if (KMessageBox::questionYesNo(this,
- i18n("Auto-saved files exist. Do you want to recover them now?"),
- i18n("File Recovery"),
- KGuiItem(i18n("Recover")), KGuiItem(i18n("Don't recover"))) == KMessageBox::Yes) {
+ if(!staleFiles.isEmpty()) {
+ if(KMessageBox::questionYesNo(this,
+ i18n("Auto-saved files exist. Do you want to recover them now?"),
+ i18n("File Recovery"),
+ KGuiItem(i18n("Recover")), KGuiItem(i18n("Don't recover"))) == KMessageBox::Yes) {
recoverFiles(staleFiles);
return;
} else {
// remove the stale files
- foreach(KAutoSaveFile *stale, staleFiles) {
+ foreach(KAutoSaveFile * stale, staleFiles) {
stale->open(QIODevice::ReadWrite);
delete stale;
}
}
}
- if (!KdenliveSettings::activatetabs()) closeCurrentDocument();
m_messageLabel->setMessage(i18n("Opening file %1", url.path()), InformationMessage);
m_messageLabel->repaint();
doOpenFile(url, NULL);
void MainWindow::doOpenFile(const KUrl &url, KAutoSaveFile *stale)
{
- if (!m_timelineArea->isEnabled()) return;
+ if(!m_timelineArea->isEnabled()) return;
m_fileRevert->setEnabled(true);
KdenliveDoc *doc = new KdenliveDoc(url, KdenliveSettings::defaultprojectfolder(), m_commandStack, KdenliveSettings::default_profile(), QPoint(KdenliveSettings::videotracks(), KdenliveSettings::audiotracks()), m_projectMonitor->render, this);
- if (stale == NULL) {
+ if(stale == NULL) {
stale = new KAutoSaveFile(url, doc);
doc->m_autosave = stale;
} else {
bool ok;
TrackView *trackView = new TrackView(doc, &ok, this);
m_timelineArea->setCurrentIndex(m_timelineArea->addTab(trackView, KIcon("kdenlive"), doc->description()));
- if (!ok) {
+ if(!ok) {
m_timelineArea->setEnabled(false);
m_projectList->setEnabled(false);
KMessageBox::sorry(this, i18n("Cannot open file %1.\nProject is corrupted.", url.path()));
trackView->setDuration(trackView->duration());
trackView->projectView()->initCursorPos(m_projectMonitor->render->seekPosition().frames(doc->fps()));
- if (m_timelineArea->count() > 1) m_timelineArea->setTabBarHidden(false);
+ if(m_timelineArea->count() > 1) m_timelineArea->setTabBarHidden(false);
slotGotProgressInfo(QString(), -1);
m_projectMonitor->adjustRulerSize(trackView->duration());
m_projectMonitor->slotZoneMoved(trackView->inPoint(), trackView->outPoint());
void MainWindow::recoverFiles(QList<KAutoSaveFile *> staleFiles)
{
- if (!KdenliveSettings::activatetabs()) closeCurrentDocument();
- foreach(KAutoSaveFile *stale, staleFiles) {
+ foreach(KAutoSaveFile * stale, staleFiles) {
/*if (!stale->open(QIODevice::QIODevice::ReadOnly)) {
// show an error message; we could not steal the lockfile
// maybe another application got to the file before us?
}*/
kDebug() << "// OPENING RECOVERY: " << stale->fileName() << "\nMANAGED: " << stale->managedFile().path();
// the stalefiles also contain ".lock" files so we must ignore them... bug in KAutoSaveFile?
- if (!stale->fileName().endsWith(".lock")) doOpenFile(KUrl(stale->fileName()), stale);
+ if(!stale->fileName().endsWith(".lock")) doOpenFile(KUrl(stale->fileName()), stale);
else KIO::NetAccess::del(KUrl(stale->fileName()), this);
}
}
void MainWindow::parseProfiles(const QString &mltPath)
{
//KdenliveSettings::setDefaulttmpfolder();
- if (!mltPath.isEmpty()) {
+ if(!mltPath.isEmpty()) {
KdenliveSettings::setMltpath(mltPath + "/share/mlt/profiles/");
KdenliveSettings::setRendererpath(mltPath + "/bin/melt");
}
- if (KdenliveSettings::mltpath().isEmpty()) {
+ if(KdenliveSettings::mltpath().isEmpty())
KdenliveSettings::setMltpath(QString(MLT_PREFIX) + QString("/share/mlt/profiles/"));
- }
- if (KdenliveSettings::rendererpath().isEmpty() || KdenliveSettings::rendererpath().endsWith("inigo")) {
+ if(KdenliveSettings::rendererpath().isEmpty() || KdenliveSettings::rendererpath().endsWith("inigo")) {
QString meltPath = QString(MLT_PREFIX) + QString("/bin/melt");
- if (!QFile::exists(meltPath))
+ if(!QFile::exists(meltPath))
meltPath = KStandardDirs::findExe("melt");
KdenliveSettings::setRendererpath(meltPath);
}
- if (KdenliveSettings::rendererpath().isEmpty()) {
+ if(KdenliveSettings::rendererpath().isEmpty()) {
// Cannot find the MLT melt renderer, ask for location
KUrlRequesterDialog *getUrl = new KUrlRequesterDialog(QString(), i18n("Cannot find the melt program required for rendering (part of MLT)"), this);
- if (getUrl->exec() == QDialog::Rejected) {
+ if(getUrl->exec() == QDialog::Rejected) {
::exit(0);
}
KUrl rendererPath = getUrl->selectedUrl();
delete getUrl;
- if (rendererPath.isEmpty()) ::exit(0);
+ if(rendererPath.isEmpty()) ::exit(0);
KdenliveSettings::setRendererpath(rendererPath.path());
}
QStringList profilesFilter;
profilesFilter << "*";
QStringList profilesList = QDir(KdenliveSettings::mltpath()).entryList(profilesFilter, QDir::Files);
- if (profilesList.isEmpty()) {
+ if(profilesList.isEmpty()) {
// Cannot find MLT path, try finding melt
QString profilePath = KdenliveSettings::rendererpath();
- if (!profilePath.isEmpty()) {
+ if(!profilePath.isEmpty()) {
profilePath = profilePath.section('/', 0, -3);
KdenliveSettings::setMltpath(profilePath + "/share/mlt/profiles/");
profilesList = QDir(KdenliveSettings::mltpath()).entryList(profilesFilter, QDir::Files);
}
- if (profilesList.isEmpty()) {
+ if(profilesList.isEmpty()) {
// Cannot find the MLT profiles, ask for location
KUrlRequesterDialog *getUrl = new KUrlRequesterDialog(KdenliveSettings::mltpath(), i18n("Cannot find your MLT profiles, please give the path"), this);
getUrl->fileDialog()->setMode(KFile::Directory);
- if (getUrl->exec() == QDialog::Rejected) {
+ if(getUrl->exec() == QDialog::Rejected) {
::exit(0);
}
KUrl mltPath = getUrl->selectedUrl();
delete getUrl;
- if (mltPath.isEmpty()) ::exit(0);
+ if(mltPath.isEmpty()) ::exit(0);
KdenliveSettings::setMltpath(mltPath.path(KUrl::AddTrailingSlash));
profilesList = QDir(KdenliveSettings::mltpath()).entryList(profilesFilter, QDir::Files);
}
kDebug() << "RESULTING MLT PATH: " << KdenliveSettings::mltpath();
// Parse again MLT profiles to build a list of available video formats
- if (profilesList.isEmpty()) parseProfiles();
+ if(profilesList.isEmpty()) parseProfiles();
}
void MainWindow::slotEditProfiles()
{
ProfilesDialog *w = new ProfilesDialog;
- if (w->exec() == QDialog::Accepted) {
+ if(w->exec() == QDialog::Accepted) {
KdenliveSettingsDialog* d = static_cast <KdenliveSettingsDialog*>(KConfigDialog::exists("settings"));
- if (d) d->checkProfile();
+ if(d) d->checkProfile();
}
delete w;
}
leading to no audio output, see bug #934 */
//decide which audio driver is really best, in some cases SDL is wrong
- if (KdenliveSettings::audiodrivername().isEmpty()) {
+ if(KdenliveSettings::audiodrivername().isEmpty()) {
QString driver;
KProcess readProcess;
//PulseAudio needs to be selected if it exists, the ALSA pulse pcm device is not fast enough.
- if (!KStandardDirs::findExe("pactl").isEmpty()) {
+ if(!KStandardDirs::findExe("pactl").isEmpty()) {
readProcess.setOutputChannelMode(KProcess::OnlyStdoutChannel);
readProcess.setProgram("pactl", QStringList() << "stat");
readProcess.execute(2000); // Kill it after 2 seconds
QString result = QString(readProcess.readAllStandardOutput());
kDebug() << "// / / / / / READING PACTL: ";
kDebug() << result;
- if (!result.isEmpty()) {
+ if(!result.isEmpty()) {
driver = "pulse";
kDebug() << "// / / / / PULSEAUDIO DETECTED";
}
QPoint p = m_activeDocument->getTracksCount();
ProjectSettings *w = new ProjectSettings(m_projectList, m_activeTimeline->projectView()->extractTransitionsLumas(), p.x(), p.y(), m_activeDocument->projectFolder().path(), true, !m_activeDocument->isModified(), this);
- if (w->exec() == QDialog::Accepted) {
+ if(w->exec() == QDialog::Accepted) {
QString profile = w->selectedProfile();
m_activeDocument->setProjectFolder(w->selectedFolder());
- if (m_renderWidget) m_renderWidget->setDocumentPath(w->selectedFolder().path(KUrl::AddTrailingSlash));
- if (KdenliveSettings::videothumbnails() != w->enableVideoThumbs()) slotSwitchVideoThumbs();
- if (KdenliveSettings::audiothumbnails() != w->enableAudioThumbs()) slotSwitchAudioThumbs();
- if (m_activeDocument->profilePath() != profile) {
- // Profile was changed
- double dar = m_activeDocument->dar();
-
- // Deselect current effect / transition
- m_effectStack->slotClipItemSelected(NULL, 0);
- m_transitionConfig->slotTransitionItemSelected(NULL, 0, QPoint(), false);
- m_clipMonitor->slotSetXml(NULL);
- bool updateFps = m_activeDocument->setProfilePath(profile);
- KdenliveSettings::setCurrent_profile(profile);
- KdenliveSettings::setProject_fps(m_activeDocument->fps());
- setCaption(m_activeDocument->description(), m_activeDocument->isModified());
-
- m_activeDocument->clipManager()->clearUnusedProducers();
- m_monitorManager->resetProfiles(m_activeDocument->timecode());
-
- m_transitionConfig->updateProjectFormat(m_activeDocument->mltProfile(), m_activeDocument->timecode(), m_activeDocument->tracksList());
- m_effectStack->updateProjectFormat(m_activeDocument->mltProfile(), m_activeDocument->timecode());
- m_projectList->updateProjectFormat(m_activeDocument->timecode());
- if (m_renderWidget) m_renderWidget->setProfile(m_activeDocument->mltProfile());
- m_timelineArea->setTabText(m_timelineArea->currentIndex(), m_activeDocument->description());
- //m_activeDocument->clipManager()->resetProducersList(m_projectMonitor->render->producersList());
- if (dar != m_activeDocument->dar()) m_projectList->reloadClipThumbnails();
- if (updateFps) m_activeTimeline->updateProjectFps();
- m_activeDocument->setModified(true);
- m_commandStack->activeStack()->clear();
- //Update the mouse position display so it will display in DF/NDF format by default based on the project setting.
- slotUpdateMousePosition(0);
- // We need to desactivate & reactivate monitors to get a refresh
- //m_monitorManager->switchMonitors();
- }
+ if(m_renderWidget) m_renderWidget->setDocumentPath(w->selectedFolder().path(KUrl::AddTrailingSlash));
+ if(KdenliveSettings::videothumbnails() != w->enableVideoThumbs()) slotSwitchVideoThumbs();
+ if(KdenliveSettings::audiothumbnails() != w->enableAudioThumbs()) slotSwitchAudioThumbs();
+ if(m_activeDocument->profilePath() != profile) slotUpdateProjectProfile(profile);
}
delete w;
}
+void MainWindow::slotUpdateProjectProfile(const QString &profile)
+{
+ double dar = m_activeDocument->dar();
+
+ // Deselect current effect / transition
+ m_effectStack->slotClipItemSelected(NULL, 0);
+ m_transitionConfig->slotTransitionItemSelected(NULL, 0, QPoint(), false);
+ m_clipMonitor->slotSetXml(NULL);
+ bool updateFps = m_activeDocument->setProfilePath(profile);
+ KdenliveSettings::setCurrent_profile(profile);
+ KdenliveSettings::setProject_fps(m_activeDocument->fps());
+ setCaption(m_activeDocument->description(), m_activeDocument->isModified());
+
+ m_activeDocument->clipManager()->clearUnusedProducers();
+ m_monitorManager->resetProfiles(m_activeDocument->timecode());
+ m_transitionConfig->updateProjectFormat(m_activeDocument->mltProfile(), m_activeDocument->timecode(), m_activeDocument->tracksList());
+ m_effectStack->updateProjectFormat(m_activeDocument->mltProfile(), m_activeDocument->timecode());
+ m_projectList->updateProjectFormat(m_activeDocument->timecode());
+ if(m_renderWidget) m_renderWidget->setProfile(m_activeDocument->mltProfile());
+ m_timelineArea->setTabText(m_timelineArea->currentIndex(), m_activeDocument->description());
+ //m_activeDocument->clipManager()->resetProducersList(m_projectMonitor->render->producersList());
+ if(dar != m_activeDocument->dar()) m_projectList->reloadClipThumbnails();
+ if(updateFps) m_activeTimeline->updateProjectFps();
+ m_activeDocument->setModified(true);
+ m_commandStack->activeStack()->clear();
+ //Update the mouse position display so it will display in DF/NDF format by default based on the project setting.
+ slotUpdateMousePosition(0);
+ // We need to desactivate & reactivate monitors to get a refresh
+ //m_monitorManager->switchMonitors();
+}
+
void MainWindow::slotRenderProject()
{
- if (!m_renderWidget) {
+ if(!m_renderWidget) {
QString projectfolder = m_activeDocument ? m_activeDocument->projectFolder().path(KUrl::AddTrailingSlash) : KdenliveSettings::defaultprojectfolder();
m_renderWidget = new RenderWidget(projectfolder, this);
connect(m_renderWidget, SIGNAL(shutdown()), this, SLOT(slotShutdown()));
- connect(m_renderWidget, SIGNAL(selectedRenderProfile(const QString &, const QString &, const QString &, const QString&)), this, SLOT(slotSetDocumentRenderProfile(const QString &, const QString &, const QString &, const QString&)));
+ connect(m_renderWidget, SIGNAL(selectedRenderProfile(QMap <QString, QString>)), this, SLOT(slotSetDocumentRenderProfile(QMap <QString, QString>)));
connect(m_renderWidget, SIGNAL(prepareRenderingData(bool, bool, const QString&)), this, SLOT(slotPrepareRendering(bool, bool, const QString&)));
connect(m_renderWidget, SIGNAL(abortProcess(const QString &)), this, SIGNAL(abortRenderJob(const QString &)));
connect(m_renderWidget, SIGNAL(openDvdWizard(const QString &, const QString &)), this, SLOT(slotDvdWizard(const QString &, const QString &)));
- if (m_activeDocument) {
+ if(m_activeDocument) {
m_renderWidget->setProfile(m_activeDocument->mltProfile());
m_renderWidget->setGuides(m_activeDocument->guidesXml(), m_activeDocument->projectDuration());
m_renderWidget->setDocumentPath(m_activeDocument->projectFolder().path(KUrl::AddTrailingSlash));
- m_renderWidget->setRenderProfile(m_activeDocument->getDocumentProperty("renderdestination"), m_activeDocument->getDocumentProperty("rendercategory"), m_activeDocument->getDocumentProperty("renderprofile"), m_activeDocument->getDocumentProperty("renderurl"));
+ m_renderWidget->setRenderProfile(m_activeDocument->getRenderProperties());
}
}
slotCheckRenderStatus();
- /*TrackView *currentTab = (TrackView *) m_timelineArea->currentWidget();
- if (currentTab) m_renderWidget->setTimeline(currentTab);
- m_renderWidget->setDocument(m_activeDocument);*/
m_renderWidget->show();
m_renderWidget->showNormal();
+
+ // What are the following lines supposed to do?
+ //m_activeTimeline->tracksNumber();
+ //m_renderWidget->enableAudio(false);
+ //m_renderWidget->export_audio;
}
void MainWindow::slotCheckRenderStatus()
{
// Make sure there are no missing clips
- if (m_renderWidget) m_renderWidget->missingClips(m_projectList->hasMissingClips());
+ if(m_renderWidget)
+ m_renderWidget->missingClips(m_projectList->hasMissingClips());
}
void MainWindow::setRenderingProgress(const QString &url, int progress)
{
- if (m_renderWidget) m_renderWidget->setRenderJob(url, progress);
+ if(m_renderWidget)
+ m_renderWidget->setRenderJob(url, progress);
}
void MainWindow::setRenderingFinished(const QString &url, int status, const QString &error)
{
- if (m_renderWidget) m_renderWidget->setRenderStatus(url, status, error);
+ if(m_renderWidget)
+ m_renderWidget->setRenderStatus(url, status, error);
}
void MainWindow::slotCleanProject()
{
- if (KMessageBox::warningContinueCancel(this, i18n("This will remove all unused clips from your project."), i18n("Clean up project")) == KMessageBox::Cancel) return;
+ if(KMessageBox::warningContinueCancel(this, i18n("This will remove all unused clips from your project."), i18n("Clean up project")) == KMessageBox::Cancel) return;
m_projectList->cleanup();
}
void MainWindow::slotUpdateMousePosition(int pos)
{
- if (m_activeDocument)
- switch (m_timecodeFormat->currentIndex()) {
+ if(m_activeDocument)
+ switch(m_timecodeFormat->currentIndex()) {
case 0:
statusBar()->changeItem(m_activeDocument->timecode().getTimecodeFromFrames(pos), ID_TIMELINE_POS);
break;
void MainWindow::slotUpdateDocumentState(bool modified)
{
- if (!m_activeDocument) return;
+ if(!m_activeDocument) return;
setCaption(m_activeDocument->description(), modified);
m_saveAction->setEnabled(modified);
- if (modified) {
+ if(modified) {
m_timelineArea->setTabTextColor(m_timelineArea->currentIndex(), palette().color(QPalette::Link));
m_timelineArea->setTabIcon(m_timelineArea->currentIndex(), KIcon("document-save"));
} else {
void MainWindow::connectDocumentInfo(KdenliveDoc *doc)
{
- if (m_activeDocument) {
- if (m_activeDocument == doc) return;
+ if(m_activeDocument) {
+ if(m_activeDocument == doc) return;
disconnect(m_activeDocument, SIGNAL(progressInfo(const QString &, int)), this, SLOT(slotGotProgressInfo(const QString &, int)));
}
connect(doc, SIGNAL(progressInfo(const QString &, int)), this, SLOT(slotGotProgressInfo(const QString &, int)));
//m_projectMonitor->stop();
m_closeAction->setEnabled(m_timelineArea->count() > 1);
kDebug() << "/////////////////// CONNECTING DOC TO PROJECT VIEW ////////////////";
- if (m_activeDocument) {
- if (m_activeDocument == doc) return;
- if (m_activeTimeline) {
+ if(m_activeDocument) {
+ if(m_activeDocument == doc) return;
+ if(m_activeTimeline) {
disconnect(m_projectMonitor, SIGNAL(renderPosition(int)), m_activeTimeline, SLOT(moveCursorPos(int)));
disconnect(m_projectMonitor, SIGNAL(zoneUpdated(QPoint)), m_activeTimeline, SLOT(slotSetZone(QPoint)));
disconnect(m_projectMonitor, SIGNAL(durationChanged(int)), m_activeTimeline, SLOT(setDuration(int)));
+ disconnect(m_projectMonitor, SIGNAL(zoneUpdated(QPoint)), m_activeDocument, SLOT(setModified()));
+ disconnect(m_clipMonitor, SIGNAL(zoneUpdated(QPoint)), m_activeDocument, SLOT(setModified()));
disconnect(m_projectList, SIGNAL(projectModified()), m_activeDocument, SLOT(setModified()));
+ disconnect(m_projectList, SIGNAL(updateProfile(const QString &)), this, SLOT(slotUpdateProjectProfile(const QString &)));
+
disconnect(m_projectMonitor->render, SIGNAL(refreshDocumentProducers()), m_activeDocument, SLOT(checkProjectClips()));
disconnect(m_activeDocument, SIGNAL(guidesUpdated()), this, SLOT(slotGuidesUpdated()));
disconnect(m_activeTimeline, SIGNAL(cursorMoved()), m_projectMonitor, SLOT(activateMonitor()));
disconnect(m_activeTimeline, SIGNAL(insertTrack(int)), this, SLOT(slotInsertTrack(int)));
disconnect(m_activeTimeline, SIGNAL(deleteTrack(int)), this, SLOT(slotDeleteTrack(int)));
- disconnect(m_activeTimeline, SIGNAL(changeTrack(int)), this, SLOT(slotChangeTrack(int)));
+ disconnect(m_activeTimeline, SIGNAL(configTrack(int)), this, SLOT(slotConfigTrack(int)));
disconnect(m_activeDocument, SIGNAL(docModified(bool)), this, SLOT(slotUpdateDocumentState(bool)));
- disconnect(m_effectStack, SIGNAL(updateClipEffect(ClipItem*, QDomElement, QDomElement, int)), m_activeTimeline->projectView(), SLOT(slotUpdateClipEffect(ClipItem*, QDomElement, QDomElement, int)));
- disconnect(m_effectStack, SIGNAL(removeEffect(ClipItem*, QDomElement)), m_activeTimeline->projectView(), SLOT(slotDeleteEffect(ClipItem*, QDomElement)));
- disconnect(m_effectStack, SIGNAL(changeEffectState(ClipItem*, int, bool)), m_activeTimeline->projectView(), SLOT(slotChangeEffectState(ClipItem*, int, bool)));
- disconnect(m_effectStack, SIGNAL(changeEffectPosition(ClipItem*, int, int)), m_activeTimeline->projectView(), SLOT(slotChangeEffectPosition(ClipItem*, int, int)));
+ disconnect(m_effectStack, SIGNAL(updateEffect(ClipItem*, int, QDomElement, QDomElement, int)), m_activeTimeline->projectView(), SLOT(slotUpdateClipEffect(ClipItem*, int, QDomElement, QDomElement, int)));
+ disconnect(m_effectStack, SIGNAL(removeEffect(ClipItem*, int, QDomElement)), m_activeTimeline->projectView(), SLOT(slotDeleteEffect(ClipItem*, int, QDomElement)));
+ disconnect(m_effectStack, SIGNAL(changeEffectState(ClipItem*, int, int, bool)), m_activeTimeline->projectView(), SLOT(slotChangeEffectState(ClipItem*, int, int, bool)));
+ disconnect(m_effectStack, SIGNAL(changeEffectPosition(ClipItem*, int, int, int)), m_activeTimeline->projectView(), SLOT(slotChangeEffectPosition(ClipItem*, int, int, int)));
disconnect(m_effectStack, SIGNAL(refreshEffectStack(ClipItem*)), m_activeTimeline->projectView(), SLOT(slotRefreshEffects(ClipItem*)));
disconnect(m_effectStack, SIGNAL(reloadEffects()), this, SLOT(slotReloadEffects()));
+ disconnect(m_effectStack, SIGNAL(displayMessage(const QString&, int)), this, SLOT(slotGotProgressInfo(const QString&, int)));
disconnect(m_transitionConfig, SIGNAL(transitionUpdated(Transition *, QDomElement)), m_activeTimeline->projectView() , SLOT(slotTransitionUpdated(Transition *, QDomElement)));
disconnect(m_transitionConfig, SIGNAL(seekTimeline(int)), m_activeTimeline->projectView() , SLOT(setCursorPos(int)));
disconnect(m_activeTimeline->projectView(), SIGNAL(activateDocumentMonitor()), m_projectMonitor, SLOT(activateMonitor()));
connect(m_projectList, SIGNAL(clipNeedsReload(const QString&, bool)), trackView->projectView(), SLOT(slotUpdateClip(const QString &, bool)));
connect(m_projectList, SIGNAL(projectModified()), doc, SLOT(setModified()));
+ connect(m_projectList, SIGNAL(updateProfile(const QString &)), this, SLOT(slotUpdateProjectProfile(const QString &)));
connect(m_projectList, SIGNAL(clipNameChanged(const QString, const QString)), trackView->projectView(), SLOT(clipNameChanged(const QString, const QString)));
connect(m_projectList, SIGNAL(findInTimeline(const QString&)), this, SLOT(slotClipInTimeline(const QString&)));
connect(trackView, SIGNAL(cursorMoved()), m_projectMonitor, SLOT(activateMonitor()));
connect(trackView, SIGNAL(insertTrack(int)), this, SLOT(slotInsertTrack(int)));
connect(trackView, SIGNAL(deleteTrack(int)), this, SLOT(slotDeleteTrack(int)));
- connect(trackView, SIGNAL(changeTrack(int)), this, SLOT(slotChangeTrack(int)));
+ connect(trackView, SIGNAL(configTrack(int)), this, SLOT(slotConfigTrack(int)));
connect(trackView, SIGNAL(updateTracksInfo()), this, SLOT(slotUpdateTrackInfo()));
connect(trackView, SIGNAL(mousePosition(int)), this, SLOT(slotUpdateMousePosition(int)));
+ connect(trackView->projectView(), SIGNAL(forceClipProcessing(const QString &)), m_projectList, SLOT(slotForceProcessing(const QString &)));
connect(m_projectMonitor, SIGNAL(renderPosition(int)), trackView, SLOT(moveCursorPos(int)));
connect(m_projectMonitor, SIGNAL(zoneUpdated(QPoint)), trackView, SLOT(slotSetZone(QPoint)));
connect(m_clipMonitor, SIGNAL(zoneUpdated(QPoint)), m_projectList, SLOT(slotUpdateClipCut(QPoint)));
+ connect(m_projectMonitor, SIGNAL(zoneUpdated(QPoint)), doc, SLOT(setModified()));
+ connect(m_clipMonitor, SIGNAL(zoneUpdated(QPoint)), doc, SLOT(setModified()));
connect(m_projectMonitor, SIGNAL(durationChanged(int)), trackView, SLOT(setDuration(int)));
connect(m_projectMonitor->render, SIGNAL(refreshDocumentProducers()), doc, SLOT(checkProjectClips()));
connect(trackView->projectView(), SIGNAL(clipItemSelected(ClipItem*, int)), m_effectStack, SLOT(slotClipItemSelected(ClipItem*, int)));
connect(trackView->projectView(), SIGNAL(updateClipMarkers(DocClipBase *)), this, SLOT(slotUpdateClipMarkers(DocClipBase*)));
+ connect(trackView, SIGNAL(showTrackEffects(int, TrackInfo)), m_effectStack, SLOT(slotTrackItemSelected(int, TrackInfo)));
+ connect(trackView, SIGNAL(showTrackEffects(int, TrackInfo)), this, SLOT(slotActivateEffectStackView()));
connect(trackView->projectView(), SIGNAL(clipItemSelected(ClipItem*, int)), this, SLOT(slotActivateEffectStackView()));
connect(trackView->projectView(), SIGNAL(transitionItemSelected(Transition*, int, QPoint, bool)), m_transitionConfig, SLOT(slotTransitionItemSelected(Transition*, int, QPoint, bool)));
connect(trackView->projectView(), SIGNAL(playMonitor()), m_projectMonitor, SLOT(slotPlay()));
- connect(m_effectStack, SIGNAL(updateClipEffect(ClipItem*, QDomElement, QDomElement, int)), trackView->projectView(), SLOT(slotUpdateClipEffect(ClipItem*, QDomElement, QDomElement, int)));
- connect(m_effectStack, SIGNAL(removeEffect(ClipItem*, QDomElement)), trackView->projectView(), SLOT(slotDeleteEffect(ClipItem*, QDomElement)));
- connect(m_effectStack, SIGNAL(changeEffectState(ClipItem*, int, bool)), trackView->projectView(), SLOT(slotChangeEffectState(ClipItem*, int, bool)));
- connect(m_effectStack, SIGNAL(changeEffectPosition(ClipItem*, int, int)), trackView->projectView(), SLOT(slotChangeEffectPosition(ClipItem*, int, int)));
+ connect(m_effectStack, SIGNAL(updateEffect(ClipItem*, int, QDomElement, QDomElement, int)), trackView->projectView(), SLOT(slotUpdateClipEffect(ClipItem*, int, QDomElement, QDomElement, int)));
+ connect(m_effectStack, SIGNAL(updateClipRegion(ClipItem*, int, QString)), trackView->projectView(), SLOT(slotUpdateClipRegion(ClipItem*, int, QString)));
+ connect(m_effectStack, SIGNAL(removeEffect(ClipItem*, int, QDomElement)), trackView->projectView(), SLOT(slotDeleteEffect(ClipItem*, int, QDomElement)));
+ connect(m_effectStack, SIGNAL(changeEffectState(ClipItem*, int, int, bool)), trackView->projectView(), SLOT(slotChangeEffectState(ClipItem*, int, int, bool)));
+ connect(m_effectStack, SIGNAL(changeEffectPosition(ClipItem*, int, int, int)), trackView->projectView(), SLOT(slotChangeEffectPosition(ClipItem*, int, int, int)));
connect(m_effectStack, SIGNAL(refreshEffectStack(ClipItem*)), trackView->projectView(), SLOT(slotRefreshEffects(ClipItem*)));
connect(m_transitionConfig, SIGNAL(transitionUpdated(Transition *, QDomElement)), trackView->projectView() , SLOT(slotTransitionUpdated(Transition *, QDomElement)));
connect(m_transitionConfig, SIGNAL(seekTimeline(int)), trackView->projectView() , SLOT(setCursorPos(int)));
connect(m_effectStack, SIGNAL(seekTimeline(int)), trackView->projectView() , SLOT(setCursorPos(int)));
connect(m_effectStack, SIGNAL(reloadEffects()), this, SLOT(slotReloadEffects()));
+ connect(m_effectStack, SIGNAL(displayMessage(const QString&, int)), this, SLOT(slotGotProgressInfo(const QString&, int)));
connect(trackView->projectView(), SIGNAL(activateDocumentMonitor()), m_projectMonitor, SLOT(activateMonitor()));
connect(trackView, SIGNAL(zoneMoved(int, int)), this, SLOT(slotZoneMoved(int, int)));
trackView->projectView()->setContextMenu(m_timelineContextMenu, m_timelineContextClipMenu, m_timelineContextTransitionMenu, m_clipTypeGroup, (QMenu*)(factory()->container("marker_menu", this)));
m_activeTimeline = trackView;
- if (m_renderWidget) {
+ if(m_renderWidget) {
slotCheckRenderStatus();
m_renderWidget->setProfile(doc->mltProfile());
m_renderWidget->setGuides(doc->guidesXml(), doc->projectDuration());
m_renderWidget->setDocumentPath(doc->projectFolder().path(KUrl::AddTrailingSlash));
- m_renderWidget->setRenderProfile(doc->getDocumentProperty("renderdestination"), doc->getDocumentProperty("rendercategory"), doc->getDocumentProperty("renderprofile"), doc->getDocumentProperty("renderurl"));
+ m_renderWidget->setRenderProfile(doc->getRenderProperties());
}
//doc->setRenderer(m_projectMonitor->render);
m_commandStack->setActiveStack(doc->commandStack());
m_activeDocument = doc;
m_activeTimeline->updateProjectFps();
m_activeDocument->checkProjectClips();
- if (KdenliveSettings::dropbframes()) slotUpdatePreviewSettings();
+ if(KdenliveSettings::dropbframes()) slotUpdatePreviewSettings();
//Update the mouse position display so it will display in DF/NDF format by default based on the project setting.
slotUpdateMousePosition(0);
// set tool to select tool
void MainWindow::slotGuidesUpdated()
{
- if (m_renderWidget) m_renderWidget->setGuides(m_activeDocument->guidesXml(), m_activeDocument->projectDuration());
+ if(m_renderWidget)
+ m_renderWidget->setGuides(m_activeDocument->guidesXml(), m_activeDocument->projectDuration());
+}
+
+void MainWindow::slotEditKeys()
+{
+ KShortcutsDialog dialog(KShortcutsEditor::AllActions, KShortcutsEditor::LetterShortcutsAllowed, this);
+ dialog.addCollection(actionCollection(), i18nc("general keyboard shortcuts", "General"));
+ dialog.addCollection(m_effectsActionCollection, i18nc("effects and transitions keyboard shortcuts", "Effects & Transitions"));
+ dialog.configure();
}
void MainWindow::slotPreferences(int page, int option)
//An instance of your dialog could be already created and could be
// cached, in which case you want to display the cached dialog
// instead of creating another one
- if (KConfigDialog::showDialog("settings")) {
+ if(KConfigDialog::showDialog("settings")) {
KdenliveSettingsDialog* d = static_cast <KdenliveSettingsDialog*>(KConfigDialog::exists("settings"));
- if (page != -1) d->showPage(page, option);
+ if(page != -1) d->showPage(page, option);
return;
}
#endif
//connect(dialog, SIGNAL(updatePreviewSettings()), this, SLOT(slotUpdatePreviewSettings()));
dialog->show();
- if (page != -1) dialog->showPage(page, option);
+ if(page != -1) dialog->showPage(page, option);
}
void MainWindow::slotUpdatePreviewSettings()
{
- if (m_activeDocument) {
+ if(m_activeDocument) {
m_clipMonitor->slotSetXml(NULL);
m_activeDocument->updatePreviewSettings();
}
void MainWindow::updateConfiguration()
{
//TODO: we should apply settings to all projects, not only the current one
- if (m_activeTimeline) {
+ if(m_activeTimeline) {
m_activeTimeline->refresh();
m_activeTimeline->projectView()->checkAutoScroll();
m_activeTimeline->projectView()->checkTrackHeight();
- if (m_activeDocument) m_activeDocument->clipManager()->checkAudioThumbs();
+ if(m_activeDocument)
+ m_activeDocument->clipManager()->checkAudioThumbs();
}
m_buttonAudioThumbs->setChecked(KdenliveSettings::audiothumbnails());
m_buttonVideoThumbs->setChecked(KdenliveSettings::videothumbnails());
+ m_buttonShowMarkers->setChecked(KdenliveSettings::showmarkers());
+ m_buttonAutomaticSplitAudio->setChecked(KdenliveSettings::splitaudio());
// Update list of transcoding profiles
loadTranscoders();
}
+void MainWindow::slotSwitchSplitAudio()
+{
+ KdenliveSettings::setSplitaudio(!KdenliveSettings::splitaudio());
+ m_buttonAutomaticSplitAudio->setChecked(KdenliveSettings::splitaudio());
+}
void MainWindow::slotSwitchVideoThumbs()
{
KdenliveSettings::setVideothumbnails(!KdenliveSettings::videothumbnails());
- if (m_activeTimeline) {
+ if(m_activeTimeline)
m_activeTimeline->projectView()->slotUpdateAllThumbs();
- }
m_buttonVideoThumbs->setChecked(KdenliveSettings::videothumbnails());
}
void MainWindow::slotSwitchAudioThumbs()
{
KdenliveSettings::setAudiothumbnails(!KdenliveSettings::audiothumbnails());
- if (m_activeTimeline) {
+ if(m_activeTimeline) {
m_activeTimeline->refresh();
m_activeTimeline->projectView()->checkAutoScroll();
- if (m_activeDocument) m_activeDocument->clipManager()->checkAudioThumbs();
+ if(m_activeDocument)
+ m_activeDocument->clipManager()->checkAudioThumbs();
}
m_buttonAudioThumbs->setChecked(KdenliveSettings::audiothumbnails());
}
void MainWindow::slotSwitchMarkersComments()
{
KdenliveSettings::setShowmarkers(!KdenliveSettings::showmarkers());
- if (m_activeTimeline) {
+ if(m_activeTimeline)
m_activeTimeline->refresh();
- }
m_buttonShowMarkers->setChecked(KdenliveSettings::showmarkers());
}
void MainWindow::slotDeleteItem()
{
- if (QApplication::focusWidget()
- && QApplication::focusWidget()->parentWidget()
- && QApplication::focusWidget()->parentWidget()->parentWidget()
- && QApplication::focusWidget()->parentWidget()->parentWidget() == m_projectListDock) {
+ if(QApplication::focusWidget() &&
+ QApplication::focusWidget()->parentWidget() &&
+ QApplication::focusWidget()->parentWidget()->parentWidget() &&
+ QApplication::focusWidget()->parentWidget()->parentWidget() == m_projectListDock) {
m_projectList->slotRemoveClip();
} else {
QWidget *widget = QApplication::focusWidget();
- while (widget) {
- if (widget == m_effectStackDock) {
+ while(widget) {
+ if(widget == m_effectStackDock) {
m_effectStack->slotItemDel();
return;
}
}
// effect stack has no focus
- if (m_activeTimeline)
+ if(m_activeTimeline)
m_activeTimeline->projectView()->deleteSelectedClips();
}
}
void MainWindow::slotUpdateClipMarkers(DocClipBase *clip)
{
- if (m_clipMonitor->isActive()) m_clipMonitor->checkOverlay();
+ if(m_clipMonitor->isActive())
+ m_clipMonitor->checkOverlay();
m_clipMonitor->updateMarkers(clip);
}
{
DocClipBase *clip = NULL;
GenTime pos;
- if (m_projectMonitor->isActive()) {
- if (m_activeTimeline) {
+ if(m_projectMonitor->isActive()) {
+ if(m_activeTimeline) {
ClipItem *item = m_activeTimeline->projectView()->getActiveClipUnderCursor();
- if (item) {
+ if(item) {
pos = GenTime((int)((m_projectMonitor->position() - item->startPos() + item->cropStart()).frames(m_activeDocument->fps()) * item->speed() + 0.5), m_activeDocument->fps());
clip = item->baseClip();
}
clip = m_clipMonitor->activeClip();
pos = m_clipMonitor->position();
}
- if (!clip) {
+ if(!clip) {
m_messageLabel->setMessage(i18n("Cannot find clip to add marker"), ErrorMessage);
return;
}
QString id = clip->getId();
CommentedTime marker(pos, i18n("Marker"));
MarkerDialog d(clip, marker, m_activeDocument->timecode(), i18n("Add Marker"), this);
- if (d.exec() == QDialog::Accepted) {
+ if(d.exec() == QDialog::Accepted)
m_activeTimeline->projectView()->slotAddClipMarker(id, d.newMarker().time(), d.newMarker().comment());
- }
}
void MainWindow::slotDeleteClipMarker()
{
DocClipBase *clip = NULL;
GenTime pos;
- if (m_projectMonitor->isActive()) {
- if (m_activeTimeline) {
+ if(m_projectMonitor->isActive()) {
+ if(m_activeTimeline) {
ClipItem *item = m_activeTimeline->projectView()->getActiveClipUnderCursor();
- if (item) {
+ if(item) {
pos = (m_projectMonitor->position() - item->startPos() + item->cropStart()) / item->speed();
clip = item->baseClip();
}
clip = m_clipMonitor->activeClip();
pos = m_clipMonitor->position();
}
- if (!clip) {
+ if(!clip) {
m_messageLabel->setMessage(i18n("Cannot find clip to remove marker"), ErrorMessage);
return;
}
QString id = clip->getId();
QString comment = clip->markerComment(pos);
- if (comment.isEmpty()) {
+ if(comment.isEmpty()) {
m_messageLabel->setMessage(i18n("No marker found at cursor time"), ErrorMessage);
return;
}
void MainWindow::slotDeleteAllClipMarkers()
{
DocClipBase *clip = NULL;
- if (m_projectMonitor->isActive()) {
- if (m_activeTimeline) {
+ if(m_projectMonitor->isActive()) {
+ if(m_activeTimeline) {
ClipItem *item = m_activeTimeline->projectView()->getActiveClipUnderCursor();
- if (item) {
+ if(item) {
clip = item->baseClip();
}
}
} else {
clip = m_clipMonitor->activeClip();
}
- if (!clip) {
+ if(!clip) {
m_messageLabel->setMessage(i18n("Cannot find clip to remove marker"), ErrorMessage);
return;
}
{
DocClipBase *clip = NULL;
GenTime pos;
- if (m_projectMonitor->isActive()) {
- if (m_activeTimeline) {
+ if(m_projectMonitor->isActive()) {
+ if(m_activeTimeline) {
ClipItem *item = m_activeTimeline->projectView()->getActiveClipUnderCursor();
- if (item) {
+ if(item) {
pos = (m_projectMonitor->position() - item->startPos() + item->cropStart()) / item->speed();
clip = item->baseClip();
}
clip = m_clipMonitor->activeClip();
pos = m_clipMonitor->position();
}
- if (!clip) {
+ if(!clip) {
m_messageLabel->setMessage(i18n("Cannot find clip to remove marker"), ErrorMessage);
return;
}
QString id = clip->getId();
QString oldcomment = clip->markerComment(pos);
- if (oldcomment.isEmpty()) {
+ if(oldcomment.isEmpty()) {
m_messageLabel->setMessage(i18n("No marker found at cursor time"), ErrorMessage);
return;
}
CommentedTime marker(pos, oldcomment);
MarkerDialog d(clip, marker, m_activeDocument->timecode(), i18n("Edit Marker"), this);
- if (d.exec() == QDialog::Accepted) {
+ if(d.exec() == QDialog::Accepted) {
m_activeTimeline->projectView()->slotAddClipMarker(id, d.newMarker().time(), d.newMarker().comment());
- if (d.newMarker().time() != pos) {
+ if(d.newMarker().time() != pos) {
// remove old marker
m_activeTimeline->projectView()->slotAddClipMarker(id, pos, QString());
}
void MainWindow::slotAddGuide()
{
- if (m_activeTimeline)
+ if(m_activeTimeline)
m_activeTimeline->projectView()->slotAddGuide();
}
void MainWindow::slotInsertSpace()
{
- if (m_activeTimeline)
+ if(m_activeTimeline)
m_activeTimeline->projectView()->slotInsertSpace();
}
void MainWindow::slotRemoveSpace()
{
- if (m_activeTimeline)
+ if(m_activeTimeline)
m_activeTimeline->projectView()->slotRemoveSpace();
}
void MainWindow::slotInsertTrack(int ix)
{
m_projectMonitor->activateMonitor();
- if (m_activeTimeline)
+ if(m_activeTimeline)
m_activeTimeline->projectView()->slotInsertTrack(ix);
- if (m_activeDocument)
+ if(m_activeDocument)
m_transitionConfig->updateProjectFormat(m_activeDocument->mltProfile(), m_activeDocument->timecode(), m_activeDocument->tracksList());
}
void MainWindow::slotDeleteTrack(int ix)
{
m_projectMonitor->activateMonitor();
- if (m_activeTimeline)
+ if(m_activeTimeline)
m_activeTimeline->projectView()->slotDeleteTrack(ix);
- if (m_activeDocument)
+ if(m_activeDocument)
m_transitionConfig->updateProjectFormat(m_activeDocument->mltProfile(), m_activeDocument->timecode(), m_activeDocument->tracksList());
}
-void MainWindow::slotChangeTrack(int ix)
+void MainWindow::slotConfigTrack(int ix)
{
m_projectMonitor->activateMonitor();
- if (m_activeTimeline)
- m_activeTimeline->projectView()->slotChangeTrack(ix);
+ if(m_activeTimeline)
+ m_activeTimeline->projectView()->slotConfigTracks(ix);
+ if(m_activeDocument)
+ m_transitionConfig->updateProjectFormat(m_activeDocument->mltProfile(), m_activeDocument->timecode(), m_activeDocument->tracksList());
}
void MainWindow::slotEditGuide()
{
- if (m_activeTimeline)
+ if(m_activeTimeline)
m_activeTimeline->projectView()->slotEditGuide();
}
void MainWindow::slotDeleteGuide()
{
- if (m_activeTimeline)
+ if(m_activeTimeline)
m_activeTimeline->projectView()->slotDeleteGuide();
}
void MainWindow::slotDeleteAllGuides()
{
- if (m_activeTimeline)
+ if(m_activeTimeline)
m_activeTimeline->projectView()->slotDeleteAllGuides();
}
void MainWindow::slotCutTimelineClip()
{
- if (m_activeTimeline) {
+ if(m_activeTimeline)
m_activeTimeline->projectView()->cutSelectedClips();
- }
}
void MainWindow::slotInsertClipOverwrite()
{
- if (m_activeTimeline) {
+ if(m_activeTimeline) {
QStringList data = m_clipMonitor->getZoneInfo();
m_activeTimeline->projectView()->insertZoneOverwrite(data, m_activeTimeline->inPoint());
}
void MainWindow::slotSelectTimelineClip()
{
- if (m_activeTimeline) {
+ if(m_activeTimeline)
m_activeTimeline->projectView()->selectClip(true);
- }
}
void MainWindow::slotSelectTimelineTransition()
{
- if (m_activeTimeline) {
+ if(m_activeTimeline)
m_activeTimeline->projectView()->selectTransition(true);
- }
}
void MainWindow::slotDeselectTimelineClip()
{
- if (m_activeTimeline) {
+ if(m_activeTimeline)
m_activeTimeline->projectView()->selectClip(false, true);
- }
}
void MainWindow::slotDeselectTimelineTransition()
{
- if (m_activeTimeline) {
+ if(m_activeTimeline)
m_activeTimeline->projectView()->selectTransition(false, true);
- }
}
void MainWindow::slotSelectAddTimelineClip()
{
- if (m_activeTimeline) {
+ if(m_activeTimeline)
m_activeTimeline->projectView()->selectClip(true, true);
- }
}
void MainWindow::slotSelectAddTimelineTransition()
{
- if (m_activeTimeline) {
+ if(m_activeTimeline)
m_activeTimeline->projectView()->selectTransition(true, true);
- }
}
void MainWindow::slotGroupClips()
{
- if (m_activeTimeline) {
+ if(m_activeTimeline)
m_activeTimeline->projectView()->groupClips();
- }
}
void MainWindow::slotUnGroupClips()
{
- if (m_activeTimeline) {
+ if(m_activeTimeline)
m_activeTimeline->projectView()->groupClips(false);
- }
}
void MainWindow::slotEditItemDuration()
{
- if (m_activeTimeline) {
+ if(m_activeTimeline)
m_activeTimeline->projectView()->editItemDuration();
- }
}
void MainWindow::slotAddProjectClip(KUrl url)
{
- if (m_activeDocument)
+ if(m_activeDocument)
m_activeDocument->slotAddClipFile(url, QString());
}
void MainWindow::slotAddTransition(QAction *result)
{
- if (!result) return;
+ if(!result) return;
QStringList info = result->data().toStringList();
- if (info.isEmpty()) return;
+ if(info.isEmpty()) return;
QDomElement transition = transitions.getEffectByTag(info.at(1), info.at(2));
- if (m_activeTimeline && !transition.isNull()) {
+ if(m_activeTimeline && !transition.isNull()) {
m_activeTimeline->projectView()->slotAddTransitionToSelectedClips(transition.cloneNode().toElement());
}
}
void MainWindow::slotAddVideoEffect(QAction *result)
{
- if (!result) return;
+ if(!result) return;
QStringList info = result->data().toStringList();
- if (info.isEmpty()) return;
+ if(info.isEmpty()) return;
QDomElement effect = videoEffects.getEffectByTag(info.at(1), info.at(2));
slotAddEffect(effect);
}
void MainWindow::slotAddAudioEffect(QAction *result)
{
- if (!result) return;
+ if(!result) return;
QStringList info = result->data().toStringList();
- if (info.isEmpty()) return;
+ if(info.isEmpty()) return;
QDomElement effect = audioEffects.getEffectByTag(info.at(1), info.at(2));
slotAddEffect(effect);
}
void MainWindow::slotAddCustomEffect(QAction *result)
{
- if (!result) return;
+ if(!result) return;
QStringList info = result->data().toStringList();
- if (info.isEmpty()) return;
+ if(info.isEmpty()) return;
QDomElement effect = customEffects.getEffectByTag(info.at(1), info.at(2));
slotAddEffect(effect);
}
void MainWindow::slotFitZoom()
{
- if (m_activeTimeline) {
+ if(m_activeTimeline)
m_zoomSlider->setValue(m_activeTimeline->fitZoom());
- }
}
void MainWindow::slotSetZoom(int value)
{
- if (m_activeTimeline)
+ value = qMax(m_zoomSlider->minimum(), value);
+ value = qMin(m_zoomSlider->maximum(), value);
+
+ if(m_activeTimeline)
m_activeTimeline->slotChangeZoom(value);
m_zoomOut->setEnabled(value < m_zoomSlider->maximum());
void MainWindow::slotShowZoomSliderToolTip(int zoomlevel)
{
- if (zoomlevel != -1)
+ if(zoomlevel != -1)
slotUpdateZoomSliderToolTip(zoomlevel);
QPoint global = m_zoomSlider->rect().topLeft();
void MainWindow::slotGotProgressInfo(const QString &message, int progress)
{
m_statusProgressBar->setValue(progress);
- if (progress >= 0) {
- if (!message.isEmpty()) m_messageLabel->setMessage(message, InformationMessage);//statusLabel->setText(message);
+ if(progress >= 0) {
+ if(!message.isEmpty())
+ m_messageLabel->setMessage(message, InformationMessage);//statusLabel->setText(message);
m_statusProgressBar->setVisible(true);
- } else if (progress == -2) {
- if (!message.isEmpty()) m_messageLabel->setMessage(message, ErrorMessage);
+ } else if(progress == -2) {
+ if(!message.isEmpty())
+ m_messageLabel->setMessage(message, ErrorMessage);
m_statusProgressBar->setVisible(false);
} else {
m_messageLabel->setMessage(QString(), DefaultMessage);
void MainWindow::slotShowClipProperties(DocClipBase *clip)
{
- if (clip->clipType() == TEXT) {
+ if(clip->clipType() == TEXT) {
QString titlepath = m_activeDocument->projectFolder().path(KUrl::AddTrailingSlash) + "titles/";
- if (!clip->getProperty("resource").isEmpty() && clip->getProperty("xmldata").isEmpty()) {
+ if(!clip->getProperty("resource").isEmpty() && clip->getProperty("xmldata").isEmpty()) {
// template text clip
// Get the list of existing templates
dia_ui.setupUi(dia);
int ix = -1;
const QString templatePath = clip->getProperty("resource");
- for (int i = 0; i < templateFiles.size(); ++i) {
+ for(int i = 0; i < templateFiles.size(); ++i) {
dia_ui.template_list->comboBox()->addItem(templateFiles.at(i), titlepath + templateFiles.at(i));
- if (templatePath == KUrl(titlepath + templateFiles.at(i)).path()) ix = i;
+ if(templatePath == KUrl(titlepath + templateFiles.at(i)).path()) ix = i;
}
- if (ix != -1) dia_ui.template_list->comboBox()->setCurrentIndex(ix);
+ if(ix != -1) dia_ui.template_list->comboBox()->setCurrentIndex(ix);
else dia_ui.template_list->comboBox()->insertItem(0, templatePath);
dia_ui.template_list->fileDialog()->setFilter("*.kdenlivetitle");
//warning: setting base directory doesn't work??
KUrl startDir(titlepath);
dia_ui.template_list->fileDialog()->setUrl(startDir);
dia_ui.description->setText(clip->getProperty("description"));
- if (dia->exec() == QDialog::Accepted) {
+ if(dia->exec() == QDialog::Accepted) {
QString textTemplate = dia_ui.template_list->comboBox()->itemData(dia_ui.template_list->comboBox()->currentIndex()).toString();
- if (textTemplate.isEmpty()) textTemplate = dia_ui.template_list->comboBox()->currentText();
+ if(textTemplate.isEmpty()) textTemplate = dia_ui.template_list->comboBox()->currentText();
QMap <QString, QString> newprops;
- if (KUrl(textTemplate).path() != templatePath) {
+ if(KUrl(textTemplate).path() != templatePath) {
// The template was changed
newprops.insert("resource", textTemplate);
}
- if (dia_ui.description->toPlainText() != clip->getProperty("description")) {
+ if(dia_ui.description->toPlainText() != clip->getProperty("description")) {
newprops.insert("description", dia_ui.description->toPlainText());
}
QString newtemplate = newprops.value("xmltemplate");
- if (newtemplate.isEmpty()) newtemplate = templatePath;
+ if(newtemplate.isEmpty()) newtemplate = templatePath;
// template modified we need to update xmldata
QString description = newprops.value("description");
- if (description.isEmpty()) description = clip->getProperty("description");
+ if(description.isEmpty()) description = clip->getProperty("description");
else newprops.insert("templatetext", description);
//newprops.insert("xmldata", m_projectList->generateTemplateXml(newtemplate, description).toString());
- if (!newprops.isEmpty()) {
+ if(!newprops.isEmpty()) {
EditClipCommand *command = new EditClipCommand(m_projectList, clip->getId(), clip->properties(), newprops, true);
m_activeDocument->commandStack()->push(command);
}
QDomDocument doc;
doc.setContent(clip->getProperty("xmldata"));
dia_ui->setXml(doc);
- if (dia_ui->exec() == QDialog::Accepted) {
+ if(dia_ui->exec() == QDialog::Accepted) {
QMap <QString, QString> newprops;
newprops.insert("xmldata", dia_ui->xml().toString());
- if (dia_ui->outPoint() != clip->duration().frames(m_activeDocument->fps()) - 1) {
+ if(dia_ui->outPoint() != clip->duration().frames(m_activeDocument->fps()) - 1) {
// duration changed, we need to update duration
newprops.insert("out", QString::number(dia_ui->outPoint()));
}
//m_activeDocument->editTextClip(clip->getProperty("xml"), clip->getId());
return;
}
+
+ // any type of clip but a title
ClipProperties dia(clip, m_activeDocument->timecode(), m_activeDocument->fps(), this);
connect(&dia, SIGNAL(addMarker(const QString &, GenTime, QString)), m_activeTimeline->projectView(), SLOT(slotAddClipMarker(const QString &, GenTime, QString)));
- if (dia.exec() == QDialog::Accepted) {
+ if(dia.exec() == QDialog::Accepted) {
QMap <QString, QString> newprops = dia.properties();
- if (newprops.isEmpty()) return;
+ if(newprops.isEmpty()) return;
EditClipCommand *command = new EditClipCommand(m_projectList, clip->getId(), clip->properties(), newprops, true);
m_activeDocument->commandStack()->push(command);
+ m_activeDocument->setModified();
- if (dia.needsTimelineRefresh()) {
+ if(dia.needsTimelineRefresh()) {
// update clip occurences in timeline
m_activeTimeline->projectView()->slotUpdateClip(clip->getId(), dia.needsTimelineReload());
}
void MainWindow::slotShowClipProperties(QList <DocClipBase *> cliplist, QMap<QString, QString> commonproperties)
{
ClipProperties dia(cliplist, m_activeDocument->timecode(), commonproperties, this);
- if (dia.exec() == QDialog::Accepted) {
+ if(dia.exec() == QDialog::Accepted) {
QUndoCommand *command = new QUndoCommand();
command->setText(i18n("Edit clips"));
- for (int i = 0; i < cliplist.count(); i++) {
+ for(int i = 0; i < cliplist.count(); i++) {
DocClipBase *clip = cliplist.at(i);
new EditClipCommand(m_projectList, clip->getId(), clip->properties(), dia.properties(), true, command);
}
m_activeDocument->commandStack()->push(command);
- for (int i = 0; i < cliplist.count(); i++) {
+ for(int i = 0; i < cliplist.count(); i++)
m_activeTimeline->projectView()->slotUpdateClip(cliplist.at(i)->getId(), dia.needsTimelineReload());
- }
}
}
void MainWindow::customEvent(QEvent* e)
{
- if (e->type() == QEvent::User) {
+ if(e->type() == QEvent::User)
m_messageLabel->setMessage(static_cast <MltErrorEvent *>(e)->message(), MltError);
- }
}
void MainWindow::slotActivateEffectStackView()
{
void MainWindow::slotActivateTransitionView(Transition *t)
{
- if (t) m_transitionConfig->raiseWindow(m_transitionConfigDock);
+ if(t)
+ m_transitionConfig->raiseWindow(m_transitionConfigDock);
}
void MainWindow::slotSnapRewind()
{
- if (m_projectMonitor->isActive()) {
- if (m_activeTimeline)
+ if(m_projectMonitor->isActive()) {
+ if(m_activeTimeline)
m_activeTimeline->projectView()->slotSeekToPreviousSnap();
- } else m_clipMonitor->slotSeekToPreviousSnap();
+ } else {
+ m_clipMonitor->slotSeekToPreviousSnap();
+ }
}
void MainWindow::slotSnapForward()
{
- if (m_projectMonitor->isActive()) {
- if (m_activeTimeline)
+ if(m_projectMonitor->isActive()) {
+ if(m_activeTimeline)
m_activeTimeline->projectView()->slotSeekToNextSnap();
- } else m_clipMonitor->slotSeekToNextSnap();
+ } else {
+ m_clipMonitor->slotSeekToNextSnap();
+ }
}
void MainWindow::slotClipStart()
{
- if (m_projectMonitor->isActive()) {
- if (m_activeTimeline)
+ if(m_projectMonitor->isActive()) {
+ if(m_activeTimeline)
m_activeTimeline->projectView()->clipStart();
}
}
void MainWindow::slotClipEnd()
{
- if (m_projectMonitor->isActive()) {
- if (m_activeTimeline)
+ if(m_projectMonitor->isActive()) {
+ if(m_activeTimeline)
m_activeTimeline->projectView()->clipEnd();
}
}
void MainWindow::slotZoneStart()
{
- if (m_projectMonitor->isActive()) m_projectMonitor->slotZoneStart();
- else m_clipMonitor->slotZoneStart();
+ if(m_projectMonitor->isActive())
+ m_projectMonitor->slotZoneStart();
+ else
+ m_clipMonitor->slotZoneStart();
}
void MainWindow::slotZoneEnd()
{
- if (m_projectMonitor->isActive()) m_projectMonitor->slotZoneEnd();
- else m_clipMonitor->slotZoneEnd();
+ if(m_projectMonitor->isActive())
+ m_projectMonitor->slotZoneEnd();
+ else
+ m_clipMonitor->slotZoneEnd();
}
void MainWindow::slotChangeTool(QAction * action)
{
- if (action == m_buttonSelectTool) slotSetTool(SELECTTOOL);
- else if (action == m_buttonRazorTool) slotSetTool(RAZORTOOL);
- else if (action == m_buttonSpacerTool) slotSetTool(SPACERTOOL);
+ if(action == m_buttonSelectTool)
+ slotSetTool(SELECTTOOL);
+ else if(action == m_buttonRazorTool)
+ slotSetTool(RAZORTOOL);
+ else if(action == m_buttonSpacerTool)
+ slotSetTool(SPACERTOOL);
}
void MainWindow::slotChangeEdit(QAction * action)
{
- if (!m_activeTimeline) return;
- if (action == m_overwriteEditTool) m_activeTimeline->projectView()->setEditMode(OVERWRITEEDIT);
- else if (action == m_insertEditTool) m_activeTimeline->projectView()->setEditMode(INSERTEDIT);
- else m_activeTimeline->projectView()->setEditMode(NORMALEDIT);
+ if(!m_activeTimeline)
+ return;
+
+ if(action == m_overwriteEditTool)
+ m_activeTimeline->projectView()->setEditMode(OVERWRITEEDIT);
+ else if(action == m_insertEditTool)
+ m_activeTimeline->projectView()->setEditMode(INSERTEDIT);
+ else
+ m_activeTimeline->projectView()->setEditMode(NORMALEDIT);
}
void MainWindow::slotSetTool(PROJECTTOOL tool)
{
- if (m_activeDocument && m_activeTimeline) {
+ if(m_activeDocument && m_activeTimeline) {
//m_activeDocument->setTool(tool);
QString message;
- switch (tool) {
+ switch(tool) {
case SPACERTOOL:
message = i18n("Ctrl + click to use spacer on current track only");
break;
void MainWindow::slotCopy()
{
- if (!m_activeDocument || !m_activeTimeline) return;
- m_activeTimeline->projectView()->copyClip();
+ if(m_activeDocument && m_activeTimeline)
+ m_activeTimeline->projectView()->copyClip();
}
void MainWindow::slotPaste()
{
- if (!m_activeDocument || !m_activeTimeline) return;
- m_activeTimeline->projectView()->pasteClip();
+ if(m_activeDocument && m_activeTimeline)
+ m_activeTimeline->projectView()->pasteClip();
}
void MainWindow::slotPasteEffects()
{
- if (!m_activeDocument || !m_activeTimeline) return;
- m_activeTimeline->projectView()->pasteClipEffects();
+ if(m_activeDocument && m_activeTimeline)
+ m_activeTimeline->projectView()->pasteClipEffects();
}
void MainWindow::slotFind()
{
- if (!m_activeDocument || !m_activeTimeline) return;
+ if(!m_activeDocument || !m_activeTimeline) return;
m_projectSearch->setEnabled(false);
m_findActivated = true;
m_findString.clear();
void MainWindow::slotFindNext()
{
- if (m_activeTimeline && m_activeTimeline->projectView()->findNextString(m_findString)) {
+ if(m_activeTimeline && m_activeTimeline->projectView()->findNextString(m_findString))
statusBar()->showMessage(i18n("Found: %1", m_findString));
- } else {
+ else
statusBar()->showMessage(i18n("Reached end of project"));
- }
m_findTimer.start(4000);
}
void MainWindow::findAhead()
{
- if (m_activeTimeline && m_activeTimeline->projectView()->findString(m_findString)) {
+ if(m_activeTimeline && m_activeTimeline->projectView()->findString(m_findString)) {
m_projectSearchNext->setEnabled(true);
statusBar()->showMessage(i18n("Found: %1", m_findString));
} else {
m_findActivated = false;
m_findString.clear();
statusBar()->showMessage(i18n("Find stopped"), 3000);
- if (m_activeTimeline) m_activeTimeline->projectView()->clearSearchStrings();
+ if(m_activeTimeline) m_activeTimeline->projectView()->clearSearchStrings();
m_projectSearch->setEnabled(true);
removeEventFilter(this);
}
void MainWindow::slotClipInTimeline(const QString &clipId)
{
- if (m_activeTimeline && m_activeDocument) {
+ if(m_activeTimeline && m_activeDocument) {
QList<ItemInfo> matching = m_activeTimeline->projectView()->findId(clipId);
QMenu *inTimelineMenu = static_cast<QMenu*>(factory()->container("clip_in_timeline", this));
QList <QAction *> actionList;
- for (int i = 0; i < matching.count(); ++i) {
+ for(int i = 0; i < matching.count(); ++i) {
QString track = QString::number(matching.at(i).track);
QString start = m_activeDocument->timecode().getTimecode(matching.at(i).startPos);
int j = 0;
QAction *a = new QAction(track + ": " + start, this);
a->setData(QStringList() << track << start);
connect(a, SIGNAL(triggered()), this, SLOT(slotSelectClipInTimeline()));
- while (j < actionList.count()) {
- if (actionList.at(j)->text() > a->text()) break;
+ while(j < actionList.count()) {
+ if(actionList.at(j)->text() > a->text()) break;
j++;
}
actionList.insert(j, a);
-
}
inTimelineMenu->addActions(actionList);
- if (matching.empty())
+ if(matching.empty())
inTimelineMenu->setEnabled(false);
else
inTimelineMenu->setEnabled(true);
void MainWindow::slotClipInProjectTree()
{
- if (m_activeTimeline) {
+ if(m_activeTimeline) {
const QStringList &clipIds = m_activeTimeline->projectView()->selectedClips();
- if (clipIds.isEmpty()) return;
+ if(clipIds.isEmpty())
+ return;
m_projectListDock->raise();
- for (int i = 0; i < clipIds.count(); i++) {
+ for(int i = 0; i < clipIds.count(); i++)
m_projectList->selectItemById(clipIds.at(i));
- }
- if (m_projectMonitor->isActive())
+ if(m_projectMonitor->isActive())
slotSwitchMonitors();
}
}
-void MainWindow::slotSelectClipInTimeline()
+/*void MainWindow::slotClipToProjectTree()
{
if (m_activeTimeline) {
+ const QList<ClipItem *> clips = m_activeTimeline->projectView()->selectedClipItems();
+ if (clips.isEmpty()) return;
+ for (int i = 0; i < clips.count(); i++) {
+ m_projectList->slotAddXmlClip(clips.at(i)->itemXml());
+ }
+ //m_projectList->selectItemById(clipIds.at(i));
+ }
+}*/
+
+void MainWindow::slotSelectClipInTimeline()
+{
+ if(m_activeTimeline) {
QAction *action = qobject_cast<QAction *>(sender());
QStringList data = action->data().toStringList();
m_activeTimeline->projectView()->selectFound(data.at(0), data.at(1));
void MainWindow::keyPressEvent(QKeyEvent *ke)
{
- if (m_findActivated) {
- if (ke->key() == Qt::Key_Backspace) {
+ if(m_findActivated) {
+ if(ke->key() == Qt::Key_Backspace) {
m_findString = m_findString.left(m_findString.length() - 1);
- if (!m_findString.isEmpty()) {
+ if(!m_findString.isEmpty())
findAhead();
- } else {
+ else
findTimeout();
- }
m_findTimer.start(4000);
ke->accept();
return;
- } else if (ke->key() == Qt::Key_Escape) {
+ } else if(ke->key() == Qt::Key_Escape) {
findTimeout();
ke->accept();
return;
- } else if (ke->key() == Qt::Key_Space || !ke->text().trimmed().isEmpty()) {
+ } else if(ke->key() == Qt::Key_Space || !ke->text().trimmed().isEmpty()) {
m_findString += ke->text();
findAhead();
ke->accept();
return;
}
- } else KXmlGuiWindow::keyPressEvent(ke);
+ } else {
+ KXmlGuiWindow::keyPressEvent(ke);
+ }
}
/** Gets called when the window gets hidden */
void MainWindow::hideEvent(QHideEvent */*event*/)
{
- if (isMinimized())
- if (m_monitorManager)
- m_monitorManager->stopActiveMonitor();
+ if(isMinimized() && m_monitorManager)
+ m_monitorManager->stopActiveMonitor();
}
bool MainWindow::eventFilter(QObject *obj, QEvent *event)
{
- if (m_findActivated) {
- if (event->type() == QEvent::ShortcutOverride) {
+ if(m_findActivated) {
+ if(event->type() == QEvent::ShortcutOverride) {
QKeyEvent* ke = (QKeyEvent*) event;
- if (ke->text().trimmed().isEmpty()) return false;
+ if(ke->text().trimmed().isEmpty()) return false;
ke->accept();
return true;
- } else return false;
+ } else {
+ return false;
+ }
} else {
// pass the event on to the parent class
return QMainWindow::eventFilter(obj, event);
vbox->addWidget(url);
vbox->addWidget(label2);
vbox->addWidget(edit);
- if (dialog->exec() == QDialog::Accepted) render->saveZone(url->url(), edit->text(), zone);
+ if(dialog->exec() == QDialog::Accepted)
+ render->saveZone(url->url(), edit->text(), zone);
}
void MainWindow::slotSetInPoint()
{
- if (m_clipMonitor->isActive()) {
+ if(m_clipMonitor->isActive())
m_clipMonitor->slotSetZoneStart();
- } else m_projectMonitor->slotSetZoneStart();
+ else
+ m_projectMonitor->slotSetZoneStart();
//else m_activeTimeline->projectView()->setInPoint();
}
void MainWindow::slotSetOutPoint()
{
- if (m_clipMonitor->isActive()) {
+ if(m_clipMonitor->isActive())
m_clipMonitor->slotSetZoneEnd();
- } else m_projectMonitor->slotSetZoneEnd();
+ else
+ m_projectMonitor->slotSetZoneEnd();
// else m_activeTimeline->projectView()->setOutPoint();
}
void MainWindow::slotResizeItemStart()
{
- if (m_activeTimeline) m_activeTimeline->projectView()->setInPoint();
+ if(m_activeTimeline)
+ m_activeTimeline->projectView()->setInPoint();
}
void MainWindow::slotResizeItemEnd()
{
- if (m_activeTimeline) m_activeTimeline->projectView()->setOutPoint();
+ if(m_activeTimeline)
+ m_activeTimeline->projectView()->setOutPoint();
}
int MainWindow::getNewStuff(const QString &configFile)
KNS3::DownloadDialog dialog(configFile);
dialog.exec();
entries = dialog.changedEntries();
- foreach(const KNS3::Entry &entry, entries) {
- if (entry.status() == KNS3::Entry::Installed)
+ foreach(const KNS3::Entry & entry, entries) {
+ if(entry.status() == KNS3::Entry::Installed)
kDebug() << "// Installed files: " << entry.installedFiles();
}
#else
KNS::Engine engine(0);
- if (engine.init(configFile))
+ if(engine.init(configFile))
entries = engine.downloadDialogModal(this);
- foreach(KNS::Entry *entry, entries) {
- if (entry->status() == KNS::Entry::Installed)
+ foreach(KNS::Entry * entry, entries) {
+ if(entry->status() == KNS::Entry::Installed)
kDebug() << "// Installed files: " << entry->installedFiles();
}
#endif /* KDE_IS_VERSION(4,3,80) */
void MainWindow::slotGetNewTitleStuff()
{
- if (getNewStuff("kdenlive_titles.knsrc") > 0)
+ if(getNewStuff("kdenlive_titles.knsrc") > 0)
TitleWidget::refreshTitleTemplates();
}
void MainWindow::slotGetNewLumaStuff()
{
- if (getNewStuff("kdenlive_wipes.knsrc") > 0) {
+ if(getNewStuff("kdenlive_wipes.knsrc") > 0) {
initEffects::refreshLumas();
m_activeTimeline->projectView()->reloadTransitionLumas();
}
void MainWindow::slotGetNewRenderStuff()
{
- if (getNewStuff("kdenlive_renderprofiles.knsrc") > 0)
- if (m_renderWidget)
+ if(getNewStuff("kdenlive_renderprofiles.knsrc") > 0)
+ if(m_renderWidget)
m_renderWidget->reloadProfiles();
}
void MainWindow::slotGetNewMltProfileStuff()
{
- if (getNewStuff("kdenlive_projectprofiles.knsrc") > 0) {
+ if(getNewStuff("kdenlive_projectprofiles.knsrc") > 0) {
// update the list of profiles in settings dialog
KdenliveSettingsDialog* d = static_cast <KdenliveSettingsDialog*>(KConfigDialog::exists("settings"));
- if (d)
+ if(d)
d->checkProfile();
}
}
void MainWindow::slotAutoTransition()
{
- if (m_activeTimeline) m_activeTimeline->projectView()->autoTransition();
+ if(m_activeTimeline)
+ m_activeTimeline->projectView()->autoTransition();
}
void MainWindow::slotSplitAudio()
{
- if (m_activeTimeline) m_activeTimeline->projectView()->splitAudio();
+ if(m_activeTimeline)
+ m_activeTimeline->projectView()->splitAudio();
}
void MainWindow::slotUpdateClipType(QAction *action)
{
- if (m_activeTimeline) {
- if (action->data().toString() == "clip_audio_only") m_activeTimeline->projectView()->setAudioOnly();
- else if (action->data().toString() == "clip_video_only") m_activeTimeline->projectView()->setVideoOnly();
+ if(m_activeTimeline) {
+ if(action->data().toString() == "clip_audio_only") m_activeTimeline->projectView()->setAudioOnly();
+ else if(action->data().toString() == "clip_video_only") m_activeTimeline->projectView()->setVideoOnly();
else m_activeTimeline->projectView()->setAudioAndVideo();
}
}
void MainWindow::slotShowTimeline(bool show)
{
- if (show == false) {
+ if(show == false) {
m_timelineState = saveState();
centralWidget()->setHidden(true);
} else {
{
m_timelineState = saveState();
QWidget *par = focusWidget()->parentWidget();
- while (par->parentWidget() && par->parentWidget() != this) {
+ while(par->parentWidget() && par->parentWidget() != this)
par = par->parentWidget();
- }
kDebug() << "CURRENT WIDGET: " << par->objectName();
}
/*else {
// read the entries
QMap< QString, QString > profiles = transConfig.entryMap();
QMapIterator<QString, QString> i(profiles);
- while (i.hasNext()) {
+ while(i.hasNext()) {
i.next();
QStringList data = i.value().split(";", QString::SkipEmptyParts);
QAction *a = transMenu->addAction(i.key());
a->setData(data);
- if (data.count() > 1) {
+ if(data.count() > 1)
a->setToolTip(data.at(1));
- }
connect(a, SIGNAL(triggered()), this, SLOT(slotTranscode()));
}
}
QString params;
QString desc;
QString condition;
- if (urls.isEmpty()) {
+ if(urls.isEmpty()) {
QAction *action = qobject_cast<QAction *>(sender());
QStringList data = action->data().toStringList();
params = data.at(0);
- if (data.count() > 1) desc = data.at(1);
- if (data.count() > 2) condition = data.at(2);
+ if(data.count() > 1) desc = data.at(1);
+ if(data.count() > 2) condition = data.at(2);
urls << m_projectList->getConditionalUrls(condition);
urls.removeAll(KUrl());
}
- if (urls.isEmpty()) {
+ if(urls.isEmpty()) {
m_messageLabel->setMessage(i18n("No clip to transcode"), ErrorMessage);
return;
}
void MainWindow::slotTranscodeClip()
{
KUrl::List urls = KFileDialog::getOpenUrls(KUrl("kfiledialog:///projectfolder"));
- if (urls.isEmpty()) return;
+ if(urls.isEmpty()) return;
slotTranscode(urls);
}
-void MainWindow::slotSetDocumentRenderProfile(const QString &dest, const QString &group, const QString &name, const QString &file)
+void MainWindow::slotSetDocumentRenderProfile(QMap <QString, QString> props)
{
- if (m_activeDocument == NULL) return;
- m_activeDocument->setDocumentProperty("renderdestination", dest);
- m_activeDocument->setDocumentProperty("rendercategory", group);
- m_activeDocument->setDocumentProperty("renderprofile", name);
- m_activeDocument->setDocumentProperty("renderurl", file);
+ if(m_activeDocument == NULL) return;
+ QMapIterator<QString, QString> i(props);
+ while(i.hasNext()) {
+ i.next();
+ m_activeDocument->setDocumentProperty(i.key(), i.value());
+ }
m_activeDocument->setModified(true);
}
void MainWindow::slotPrepareRendering(bool scriptExport, bool zoneOnly, const QString &chapterFile)
{
- if (m_activeDocument == NULL || m_renderWidget == NULL) return;
+ if(m_activeDocument == NULL || m_renderWidget == NULL) return;
QString scriptPath;
QString playlistPath;
- if (scriptExport) {
+ if(scriptExport) {
bool ok;
QString scriptsFolder = m_activeDocument->projectFolder().path() + "/scripts/";
QString path = m_renderWidget->getFreeScriptName();
scriptPath = QInputDialog::getText(this, i18n("Create Render Script"), i18n("Script name (will be saved in: %1)", scriptsFolder), QLineEdit::Normal, KUrl(path).fileName(), &ok);
- if (!ok || scriptPath.isEmpty()) return;
+ if(!ok || scriptPath.isEmpty()) return;
scriptPath.prepend(scriptsFolder);
QFile f(scriptPath);
- if (f.exists()) {
- if (KMessageBox::warningYesNo(this, i18n("Script file already exists. Do you want to overwrite it?")) != KMessageBox::Yes)
+ if(f.exists()) {
+ if(KMessageBox::warningYesNo(this, i18n("Script file already exists. Do you want to overwrite it?")) != KMessageBox::Yes)
return;
}
playlistPath = scriptPath + ".mlt";
m_projectMonitor->saveSceneList(playlistPath);
}
- if (!chapterFile.isEmpty()) {
+ if(!chapterFile.isEmpty()) {
int in = 0;
int out;
- if (!zoneOnly) out = (int) GenTime(m_activeDocument->projectDuration()).frames(m_activeDocument->fps());
+ if(!zoneOnly) out = (int) GenTime(m_activeDocument->projectDuration()).frames(m_activeDocument->fps());
else {
in = m_activeTimeline->inPoint();
out = m_activeTimeline->outPoint();
QDomElement guidesxml = m_activeDocument->guidesXml();
QDomNodeList nodes = guidesxml.elementsByTagName("guide");
- for (int i = 0; i < nodes.count(); i++) {
+ for(int i = 0; i < nodes.count(); i++) {
QDomElement e = nodes.item(i).toElement();
- if (!e.isNull()) {
+ if(!e.isNull()) {
QString comment = e.attribute("comment");
int time = (int) GenTime(e.attribute("time").toDouble()).frames(m_activeDocument->fps());
- if (time >= in && time < out) {
- if (zoneOnly) time = time - in;
+ if(time >= in && time < out) {
+ if(zoneOnly) time = time - in;
QDomElement chapter = doc.createElement("chapter");
chapters.appendChild(chapter);
chapter.setAttribute("title", comment);
}
}
}
- if (chapters.childNodes().count() > 0) {
- if (m_activeTimeline->projectView()->hasGuide(out, 0) == -1) {
+ if(chapters.childNodes().count() > 0) {
+ if(m_activeTimeline->projectView()->hasGuide(out, 0) == -1) {
// Always insert a guide in pos 0
QDomElement chapter = doc.createElement("chapter");
chapters.insertBefore(chapter, QDomNode());
}
// save chapters file
QFile file(chapterFile);
- if (!file.open(QIODevice::WriteOnly | QIODevice::Text)) {
+ if(!file.open(QIODevice::WriteOnly | QIODevice::Text)) {
kWarning() << "////// ERROR writing DVD CHAPTER file: " << chapterFile;
} else {
file.write(doc.toString().toUtf8());
- if (file.error() != QFile::NoError) {
+ if(file.error() != QFile::NoError) {
kWarning() << "////// ERROR writing DVD CHAPTER file: " << chapterFile;
}
file.close();
}
}
}
-
- m_renderWidget->slotExport(scriptExport, m_activeTimeline->inPoint(), m_activeTimeline->outPoint(), playlistPath, scriptPath);
+ bool exportAudio;
+ if(m_renderWidget->automaticAudioExport()) {
+ exportAudio = m_activeTimeline->checkProjectAudio();
+ } else exportAudio = m_renderWidget->selectedAudioExport();
+ m_renderWidget->slotExport(scriptExport, m_activeTimeline->inPoint(), m_activeTimeline->outPoint(), playlistPath, scriptPath, exportAudio);
}
void MainWindow::slotUpdateTimecodeFormat(int ix)
KdenliveSettings::setFrametimecode(ix == 1);
m_clipMonitor->updateTimecodeFormat();
m_projectMonitor->updateTimecodeFormat();
- m_activeTimeline->projectView()->clearSelection();
+ m_transitionConfig->updateTimecodeFormat();
+ m_effectStack->updateTimecodeFormat();
+ //m_activeTimeline->projectView()->clearSelection();
+ m_activeTimeline->updateRuler();
}
void MainWindow::slotRemoveFocus()
void MainWindow::slotRevert()
{
- if (KMessageBox::warningContinueCancel(this, i18n("This will delete all changes made since you last saved your project. Are you sure you want to continue?"), i18n("Revert to last saved version")) == KMessageBox::Cancel) return;
+ if(KMessageBox::warningContinueCancel(this, i18n("This will delete all changes made since you last saved your project. Are you sure you want to continue?"), i18n("Revert to last saved version")) == KMessageBox::Cancel) return;
KUrl url = m_activeDocument->url();
- closeCurrentDocument(false);
- doOpenFile(url, NULL);
+ if(closeCurrentDocument(false))
+ doOpenFile(url, NULL);
}
void MainWindow::slotShutdown()
{
- if (m_activeDocument) m_activeDocument->setModified(false);
+ if(m_activeDocument) m_activeDocument->setModified(false);
// Call shutdown
QDBusConnectionInterface* interface = QDBusConnection::sessionBus().interface();
- if (interface && interface->isServiceRegistered("org.kde.ksmserver")) {
+ if(interface && interface->isServiceRegistered("org.kde.ksmserver")) {
QDBusInterface smserver("org.kde.ksmserver", "/KSMServer", "org.kde.KSMServerInterface");
smserver.call("logout", 1, 2, 2);
- } else if (interface && interface->isServiceRegistered("org.gnome.SessionManager")) {
+ } else if(interface && interface->isServiceRegistered("org.gnome.SessionManager")) {
QDBusInterface smserver("org.gnome.SessionManager", "/org/gnome/SessionManager", "org.gnome.SessionManager");
smserver.call("Shutdown");
}
void MainWindow::slotUpdateTrackInfo()
{
- if (m_activeDocument)
+ if(m_activeDocument)
m_transitionConfig->updateProjectFormat(m_activeDocument->mltProfile(), m_activeDocument->timecode(), m_activeDocument->tracksList());
}
{
// Load the theme file
QString theme;
- if (action == NULL) theme = themename;
+ if(action == NULL) theme = themename;
else theme = action->data().toString();
KdenliveSettings::setColortheme(theme);
// Make palette for all widgets.
QPalette plt;
- if (theme.isEmpty())
+ if(theme.isEmpty())
plt = QApplication::desktop()->palette();
else {
KSharedConfigPtr config = KSharedConfig::openConfig(theme);
kapp->setPalette(plt);
const QObjectList children = statusBar()->children();
- foreach(QObject *child, children) {
- if (child->isWidgetType())
+ foreach(QObject * child, children) {
+ if(child->isWidgetType())
((QWidget*)child)->setPalette(plt);
const QObjectList subchildren = child->children();
- foreach(QObject *subchild, subchildren) {
- if (subchild->isWidgetType())
+ foreach(QObject * subchild, subchildren) {
+ if(subchild->isWidgetType())
((QWidget*)subchild)->setPalette(plt);
}
}
+ if(m_activeTimeline) {
+ m_activeTimeline->projectView()->updatePalette();
+ }
}
void MainWindow::slotSwitchMonitors()
{
m_monitorManager->slotSwitchMonitors(!m_clipMonitor->isActive());
- if (m_projectMonitor->isActive()) m_activeTimeline->projectView()->setFocus();
+ if(m_projectMonitor->isActive()) m_activeTimeline->projectView()->setFocus();
else m_projectList->focusTree();
}
void MainWindow::slotInsertZoneToTree()
{
- if (!m_clipMonitor->isActive() || m_clipMonitor->activeClip() == NULL) return;
+ if(!m_clipMonitor->isActive() || m_clipMonitor->activeClip() == NULL) return;
QStringList info = m_clipMonitor->getZoneInfo();
m_projectList->slotAddClipCut(info.at(0), info.at(1).toInt(), info.at(2).toInt());
}
void MainWindow::slotInsertZoneToTimeline()
{
- if (m_activeTimeline == NULL || m_clipMonitor->activeClip() == NULL) return;
+ if(m_activeTimeline == NULL || m_clipMonitor->activeClip() == NULL) return;
QStringList info = m_clipMonitor->getZoneInfo();
m_activeTimeline->projectView()->insertClipCut(m_clipMonitor->activeClip(), info.at(1).toInt(), info.at(2).toInt());
}
void MainWindow::slotDeleteProjectClips(QStringList ids, QMap<QString, QString> folderids)
{
- if (m_activeDocument && m_activeTimeline) {
- if (!ids.isEmpty()) {
- for (int i = 0; i < ids.size(); ++i) {
+ if(m_activeDocument && m_activeTimeline) {
+ if(!ids.isEmpty()) {
+ for(int i = 0; i < ids.size(); ++i) {
m_activeTimeline->slotDeleteClip(ids.at(i));
}
m_activeDocument->clipManager()->slotDeleteClips(ids);
}
- if (!folderids.isEmpty()) m_projectList->deleteProjectFolder(folderids);
+ if(!folderids.isEmpty()) m_projectList->deleteProjectFolder(folderids);
m_activeDocument->setModified(true);
}
}
void MainWindow::slotShowTitleBars(bool show)
{
- if (show) {
+ if(show) {
m_effectStackDock->setTitleBarWidget(0);
m_clipMonitorDock->setTitleBarWidget(0);
m_projectMonitorDock->setTitleBarWidget(0);
m_transitionConfigDock->setTitleBarWidget(0);
m_projectListDock->setTitleBarWidget(0);
m_undoViewDock->setTitleBarWidget(0);
+ m_vectorscopeDock->setTitleBarWidget(0);
+ m_waveformDock->setTitleBarWidget(0);
+ m_RGBParadeDock->setTitleBarWidget(0);
+ m_histogramDock->setTitleBarWidget(0);
} else {
- if (!m_effectStackDock->isFloating()) m_effectStackDock->setTitleBarWidget(new QWidget(this));
- if (!m_clipMonitorDock->isFloating()) m_clipMonitorDock->setTitleBarWidget(new QWidget(this));
- if (!m_projectMonitorDock->isFloating()) m_projectMonitorDock->setTitleBarWidget(new QWidget(this));
+ if(!m_effectStackDock->isFloating()) {
+ m_effectStackDock->setTitleBarWidget(new QWidget);
+ }
+ if(!m_clipMonitorDock->isFloating()) {
+ m_clipMonitorDock->setTitleBarWidget(new QWidget);
+ }
+ if(!m_projectMonitorDock->isFloating()) {
+ m_projectMonitorDock->setTitleBarWidget(new QWidget);
+ }
#ifndef Q_WS_MAC
- if (!m_recMonitorDock->isFloating()) m_recMonitorDock->setTitleBarWidget(new QWidget(this));
+ if(!m_recMonitorDock->isFloating()) {
+ m_recMonitorDock->setTitleBarWidget(new QWidget);
+ }
#endif
- if (!m_effectListDock->isFloating()) m_effectListDock->setTitleBarWidget(new QWidget(this));
- if (!m_transitionConfigDock->isFloating()) m_transitionConfigDock->setTitleBarWidget(new QWidget(this));
- if (!m_projectListDock->isFloating()) m_projectListDock->setTitleBarWidget(new QWidget(this));
- if (!m_undoViewDock->isFloating()) m_undoViewDock->setTitleBarWidget(new QWidget(this));
+ if(!m_effectListDock->isFloating()) {
+ m_effectListDock->setTitleBarWidget(new QWidget);
+ }
+ if(!m_transitionConfigDock->isFloating()) {
+ m_transitionConfigDock->setTitleBarWidget(new QWidget);
+ }
+ if(!m_projectListDock->isFloating()) {
+ m_projectListDock->setTitleBarWidget(new QWidget);
+ }
+ if(!m_undoViewDock->isFloating()) {
+ m_undoViewDock->setTitleBarWidget(new QWidget);
+ }
+ if(!m_vectorscopeDock->isFloating()) {
+ m_vectorscopeDock->setTitleBarWidget(new QWidget);
+ }
+ if(!m_waveformDock->isFloating()) {
+ m_waveformDock->setTitleBarWidget(new QWidget);
+ }
+ if(!m_RGBParadeDock->isFloating()) {
+ m_RGBParadeDock->setTitleBarWidget(new QWidget(this));
+ }
+ if(!m_histogramDock->isFloating()) {
+ m_histogramDock->setTitleBarWidget(new QWidget(this));
+ }
}
KdenliveSettings::setShowtitlebars(show);
}
{
QString mimetype = "application/x-kdenlive";
KMimeType::Ptr mime = KMimeType::mimeType(mimetype);
- if (!mime) mimetype = "*.kdenlive";
+ if(!mime) mimetype = "*.kdenlive";
return mimetype;
}
+void MainWindow::slotMonitorRequestRenderFrame(bool request)
+{
+ if(request) {
+ m_projectMonitor->render->sendFrameForAnalysis = true;
+ return;
+ } else {
+ for(int i = 0; i < m_scopesList.count(); i++) {
+ if(m_scopesList.at(i)->isVisible() && tabifiedDockWidgets(m_scopesList.at(i)).isEmpty() && static_cast<AbstractScopeWidget *>(m_scopesList.at(i)->widget())->autoRefreshEnabled()) {
+ request = true;
+ break;
+ }
+ }
+ }
+ if(!request) {
+ m_projectMonitor->render->sendFrameForAnalysis = false;
+ }
+}
+
+void MainWindow::slotUpdateScopeFrameRequest()
+{
+ // We need a delay to make sure widgets are hidden after a close event for example
+ QTimer::singleShot(500, this, SLOT(slotDoUpdateScopeFrameRequest()));
+}
+
+void MainWindow::slotDoUpdateScopeFrameRequest()
+{
+ // Check scopes
+ bool request = false;
+ for(int i = 0; i < m_scopesList.count(); i++) {
+ if(!m_scopesList.at(i)->widget()->visibleRegion().isEmpty() && static_cast<AbstractScopeWidget *>(m_scopesList.at(i)->widget())->autoRefreshEnabled()) {
+ kDebug() << "SCOPE VISIBLE: " << static_cast<AbstractScopeWidget *>(m_scopesList.at(i)->widget())->widgetName();
+ request = true;
+ break;
+ }
+ }
+ if(!request) {
+ if(!m_projectMonitor->effectSceneDisplayed())
+ m_projectMonitor->render->sendFrameForAnalysis = false;
+ m_clipMonitor->render->sendFrameForAnalysis = false;
+ } else {
+ m_projectMonitor->render->sendFrameForAnalysis = true;
+ m_clipMonitor->render->sendFrameForAnalysis = true;
+ }
+}
+
+void MainWindow::slotUpdateColorScopes()
+{
+ bool request = false;
+ for(int i = 0; i < m_scopesList.count(); i++) {
+ // Check if we need the renderer to send a new frame for update
+ if(!m_scopesList.at(i)->widget()->visibleRegion().isEmpty() && !(static_cast<AbstractScopeWidget *>(m_scopesList.at(i)->widget())->autoRefreshEnabled())) request = true;
+ static_cast<AbstractScopeWidget *>(m_scopesList.at(i)->widget())->slotActiveMonitorChanged(m_clipMonitor->isActive());
+ }
+ if(request) {
+ if(m_clipMonitor->isActive()) m_clipMonitor->render->sendFrameUpdate();
+ else m_projectMonitor->render->sendFrameUpdate();
+ }
+}
+
#include "mainwindow.moc"