m_projectListDock->setWidget(m_projectList);
addDockWidget(Qt::TopDockWidgetArea, m_projectListDock);
- m_effectStackDock = new QDockWidget(i18n("Effect Stack"), this);
- m_effectStackDock->setObjectName("effect_stack");
- m_effectStack = new EffectStackView(this);
- m_effectStackDock->setWidget(m_effectStack);
- addDockWidget(Qt::TopDockWidgetArea, m_effectStackDock);
-
- m_transitionConfigDock = new QDockWidget(i18n("Transition"), this);
- m_transitionConfigDock->setObjectName("transition");
- m_transitionConfig = new TransitionSettings(this);
- m_transitionConfigDock->setWidget(m_transitionConfig);
- addDockWidget(Qt::TopDockWidgetArea, m_transitionConfigDock);
-
m_clipMonitorDock = new QDockWidget(i18n("Clip Monitor"), this);
m_clipMonitorDock->setObjectName("clip_monitor");
m_clipMonitor = new Monitor("clip", m_monitorManager, QString(), this);
connect(m_recMonitor, SIGNAL(showConfigDialog(int, int)), this, SLOT(slotPreferences(int, int)));
#endif
+ m_effectStackDock = new QDockWidget(i18n("Effect Stack"), this);
+ m_effectStackDock->setObjectName("effect_stack");
+ m_effectStack = new EffectStackView(m_projectMonitor, this);
+ m_effectStackDock->setWidget(m_effectStack);
+ addDockWidget(Qt::TopDockWidgetArea, m_effectStackDock);
+
+ m_transitionConfigDock = new QDockWidget(i18n("Transition"), this);
+ m_transitionConfigDock->setObjectName("transition");
+ m_transitionConfig = new TransitionSettings(m_projectMonitor, this);
+ m_transitionConfigDock->setWidget(m_transitionConfig);
+ addDockWidget(Qt::TopDockWidgetArea, m_transitionConfigDock);
+
m_effectListDock = new QDockWidget(i18n("Effect List"), this);
m_effectListDock->setObjectName("effect_list");
m_effectList = new EffectsListView();
m_vectorscopeDock->setObjectName(m_vectorscope->widgetName());
m_vectorscopeDock->setWidget(m_vectorscope);
addDockWidget(Qt::TopDockWidgetArea, m_vectorscopeDock);
+ connect(m_vectorscopeDock, SIGNAL(visibilityChanged(bool)), m_vectorscope, SLOT(forceUpdate(bool)));
+ connect(m_vectorscopeDock, SIGNAL(visibilityChanged(bool)), this, SLOT(slotUpdateScopeFrameRequest()));
+ connect(m_vectorscope, SIGNAL(requestAutoRefresh(bool)), this, SLOT(slotUpdateScopeFrameRequest()));
+ m_scopesList.append(m_vectorscopeDock);
m_waveform = new Waveform(m_projectMonitor, m_clipMonitor, this);
m_waveformDock = new QDockWidget(i18n("Waveform"), this);
m_waveformDock->setObjectName(m_waveform->widgetName());
m_waveformDock->setWidget(m_waveform);
addDockWidget(Qt::TopDockWidgetArea, m_waveformDock);
+ connect(m_waveformDock, SIGNAL(visibilityChanged(bool)), m_waveform, SLOT(forceUpdate(bool)));
+ connect(m_waveformDock, SIGNAL(visibilityChanged(bool)), this, SLOT(slotUpdateScopeFrameRequest()));
+ connect(m_waveform, SIGNAL(requestAutoRefresh(bool)), this, SLOT(slotUpdateScopeFrameRequest()));
+ m_scopesList.append(m_waveformDock);
m_RGBParade = new RGBParade(m_projectMonitor, m_clipMonitor, this);
m_RGBParadeDock = new QDockWidget(i18n("RGB Parade"), this);
m_RGBParadeDock->setObjectName(m_RGBParade->widgetName());
m_RGBParadeDock->setWidget(m_RGBParade);
addDockWidget(Qt::TopDockWidgetArea, m_RGBParadeDock);
+ connect(m_RGBParadeDock, SIGNAL(visibilityChanged(bool)), m_RGBParade, SLOT(forceUpdate(bool)));
+ connect(m_RGBParadeDock, SIGNAL(visibilityChanged(bool)), this, SLOT(slotUpdateScopeFrameRequest()));
+ connect(m_RGBParade, SIGNAL(requestAutoRefresh(bool)), this, SLOT(slotUpdateScopeFrameRequest()));
+ m_scopesList.append(m_RGBParadeDock);
m_histogram = new Histogram(m_projectMonitor, m_clipMonitor, this);
m_histogramDock = new QDockWidget(i18n("Histogram"), this);
m_histogramDock->setObjectName(m_histogram->widgetName());
m_histogramDock->setWidget(m_histogram);
addDockWidget(Qt::TopDockWidgetArea, m_histogramDock);
+ connect(m_histogramDock, SIGNAL(visibilityChanged(bool)), m_histogram, SLOT(forceUpdate(bool)));
+ connect(m_histogramDock, SIGNAL(visibilityChanged(bool)), this, SLOT(slotUpdateScopeFrameRequest()));
+ connect(m_histogram, SIGNAL(requestAutoRefresh(bool)), this, SLOT(slotUpdateScopeFrameRequest()));
+ m_scopesList.append(m_histogramDock);
m_undoViewDock = new QDockWidget(i18n("Undo History"), this);
connect(m_clipMonitorDock, SIGNAL(visibilityChanged(bool)), m_clipMonitor, SLOT(refreshMonitor(bool)));
//connect(m_monitorManager, SIGNAL(connectMonitors()), this, SLOT(slotConnectMonitors()));
connect(m_monitorManager, SIGNAL(raiseClipMonitor(bool)), this, SLOT(slotRaiseMonitor(bool)));
- connect(m_monitorManager, SIGNAL(raiseClipMonitor(bool)), m_vectorscope, SLOT(slotActiveMonitorChanged(bool)));
- connect(m_monitorManager, SIGNAL(raiseClipMonitor(bool)), m_waveform, SLOT(slotActiveMonitorChanged(bool)));
- connect(m_monitorManager, SIGNAL(raiseClipMonitor(bool)), m_RGBParade, SLOT(slotActiveMonitorChanged(bool)));
- connect(m_monitorManager, SIGNAL(raiseClipMonitor(bool)), m_histogram, SLOT(slotActiveMonitorChanged(bool)));
+ connect(m_monitorManager, SIGNAL(checkColorScopes()), this, SLOT(slotUpdateColorScopes()));
connect(m_effectList, SIGNAL(addEffect(const QDomElement)), this, SLOT(slotAddEffect(const QDomElement)));
connect(m_effectList, SIGNAL(reloadEffects()), this, SLOT(slotReloadEffects()));
m_projectListDock->raise();
}
+MainWindow::~MainWindow()
+{
+ m_effectStack->slotClipItemSelected(NULL, 0);
+ m_transitionConfig->slotTransitionItemSelected(NULL, 0, QPoint(), false);
+
+ if (m_projectMonitor) m_projectMonitor->stop();
+ if (m_clipMonitor) m_clipMonitor->stop();
+
+ delete m_activeTimeline;
+ delete m_effectStack;
+ delete m_transitionConfig;
+ delete m_activeDocument;
+ delete m_projectMonitor;
+ delete m_clipMonitor;
+ delete m_shortcutRemoveFocus;
+ Mlt::Factory::close();
+}
+
void MainWindow::queryQuit()
{
if (queryClose()) {
- if (m_projectMonitor) m_projectMonitor->stop();
- if (m_clipMonitor) m_clipMonitor->stop();
- delete m_effectStack;
- delete m_activeTimeline;
-#ifndef Q_WS_MAC
- // This sometimes causes crash on exit on OS X for some reason.
- delete m_projectMonitor;
- delete m_clipMonitor;
-#endif
- delete m_activeDocument;
- delete m_shortcutRemoveFocus;
- Mlt::Factory::close();
kapp->quit();
}
}
if (m_activeDocument && m_activeDocument->isModified() &&
((m_projectList->documentClipList().isEmpty() && !m_activeDocument->url().isEmpty()) ||
!m_projectList->documentClipList().isEmpty())) {
+ raise();
+ activateWindow();
QString message;
if (m_activeDocument->url().fileName().isEmpty())
message = i18n("Save changes to document?");
connect(m_clipMonitor, SIGNAL(adjustMonitorSize()), this, SLOT(slotAdjustClipMonitor()));
connect(m_projectMonitor, SIGNAL(adjustMonitorSize()), this, SLOT(slotAdjustProjectMonitor()));
+ connect(m_projectMonitor, SIGNAL(requestFrameForAnalysis(bool)), this, SLOT(slotMonitorRequestRenderFrame(bool)));
+
connect(m_clipMonitor, SIGNAL(saveZone(Render *, QPoint)), this, SLOT(slotSaveZone(Render *, QPoint)));
connect(m_projectMonitor, SIGNAL(saveZone(Render *, QPoint)), this, SLOT(slotSaveZone(Render *, QPoint)));
}
KUrl projectFolder;
QPoint projectTracks(KdenliveSettings::videotracks(), KdenliveSettings::audiotracks());
if (!showProjectSettings) {
- if (!KdenliveSettings::activatetabs()) closeCurrentDocument();
+ if (!KdenliveSettings::activatetabs()) if (!closeCurrentDocument()) return;
profileName = KdenliveSettings::default_profile();
projectFolder = KdenliveSettings::defaultprojectfolder();
} else {
ProjectSettings *w = new ProjectSettings(NULL, QStringList(), projectTracks.x(), projectTracks.y(), KdenliveSettings::defaultprojectfolder(), false, true, this);
if (w->exec() != QDialog::Accepted) return;
- if (!KdenliveSettings::activatetabs()) closeCurrentDocument();
+ if (!KdenliveSettings::activatetabs()) if (!closeCurrentDocument()) return;
if (KdenliveSettings::videothumbnails() != w->enableVideoThumbs()) slotSwitchVideoThumbs();
if (KdenliveSettings::audiothumbnails() != w->enableAudioThumbs()) slotSwitchAudioThumbs();
profileName = w->selectedProfile();
connectDocument(currentTab, currentDoc);
}
-void MainWindow::closeCurrentDocument(bool saveChanges)
+bool MainWindow::closeCurrentDocument(bool saveChanges)
{
QWidget *w = m_timelineArea->currentWidget();
- if (!w) return;
+ if (!w) return true;
// closing current document
int ix = m_timelineArea->currentIndex() + 1;
if (ix == m_timelineArea->count()) ix = 0;
switch (KMessageBox::warningYesNoCancel(this, message)) {
case KMessageBox::Yes :
// save document here. If saving fails, return false;
- if (saveFile() == false) return;
+ if (saveFile() == false) return false;
break;
case KMessageBox::Cancel :
- return;
+ return false;
break;
default:
break;
} else {
delete w;
}
+ return true;
}
bool MainWindow::saveFileAs(const QString &outputFileName)
}
if (QFile::exists(outputFile)) {
// Show the file dialog again if the user does not want to overwrite the file
- if (KMessageBox::questionYesNo(this, i18n("File already exists.\nDo you want to overwrite it?")) == KMessageBox::No)
+ if (KMessageBox::questionYesNo(this, i18n("File %1 already exists.\nDo you want to overwrite it?", outputFile)) == KMessageBox::No)
return saveFileAs();
}
return saveFileAs(outputFile);
return;
}
+ if (!KdenliveSettings::activatetabs()) if (!closeCurrentDocument()) return;
+
// Check for backup file
QList<KAutoSaveFile *> staleFiles = KAutoSaveFile::staleFiles(url);
if (!staleFiles.isEmpty()) {
}
}
}
- if (!KdenliveSettings::activatetabs()) closeCurrentDocument();
m_messageLabel->setMessage(i18n("Opening file %1", url.path()), InformationMessage);
m_messageLabel->repaint();
doOpenFile(url, NULL);
void MainWindow::recoverFiles(QList<KAutoSaveFile *> staleFiles)
{
- if (!KdenliveSettings::activatetabs()) closeCurrentDocument();
foreach(KAutoSaveFile *stale, staleFiles) {
/*if (!stale->open(QIODevice::QIODevice::ReadOnly)) {
// show an error message; we could not steal the lockfile
QString projectfolder = m_activeDocument ? m_activeDocument->projectFolder().path(KUrl::AddTrailingSlash) : KdenliveSettings::defaultprojectfolder();
m_renderWidget = new RenderWidget(projectfolder, this);
connect(m_renderWidget, SIGNAL(shutdown()), this, SLOT(slotShutdown()));
- connect(m_renderWidget, SIGNAL(selectedRenderProfile(const QString &, const QString &, const QString &, const QString&, bool, bool, int, int)), this, SLOT(slotSetDocumentRenderProfile(const QString &, const QString &, const QString &, const QString&, bool, bool, int, int)));
+ connect(m_renderWidget, SIGNAL(selectedRenderProfile(QMap <QString, QString>)), this, SLOT(slotSetDocumentRenderProfile(QMap <QString, QString>)));
connect(m_renderWidget, SIGNAL(prepareRenderingData(bool, bool, const QString&)), this, SLOT(slotPrepareRendering(bool, bool, const QString&)));
connect(m_renderWidget, SIGNAL(abortProcess(const QString &)), this, SIGNAL(abortRenderJob(const QString &)));
connect(m_renderWidget, SIGNAL(openDvdWizard(const QString &, const QString &)), this, SLOT(slotDvdWizard(const QString &, const QString &)));
m_renderWidget->setProfile(m_activeDocument->mltProfile());
m_renderWidget->setGuides(m_activeDocument->guidesXml(), m_activeDocument->projectDuration());
m_renderWidget->setDocumentPath(m_activeDocument->projectFolder().path(KUrl::AddTrailingSlash));
- m_renderWidget->setRenderProfile(m_activeDocument->getDocumentProperty("renderdestination"), m_activeDocument->getDocumentProperty("rendercategory"), m_activeDocument->getDocumentProperty("renderprofile"), m_activeDocument->getDocumentProperty("renderurl"), m_activeDocument->getDocumentProperty("renderzone") == "1", m_activeDocument->getDocumentProperty("renderguide") == "1", m_activeDocument->getDocumentProperty("startguide").toInt(), m_activeDocument->getDocumentProperty("endguide").toInt());
+ m_renderWidget->setRenderProfile(m_activeDocument->getRenderProperties());
}
}
slotCheckRenderStatus();
disconnect(m_activeTimeline, SIGNAL(deleteTrack(int)), this, SLOT(slotDeleteTrack(int)));
disconnect(m_activeTimeline, SIGNAL(configTrack(int)), this, SLOT(slotConfigTrack(int)));
disconnect(m_activeDocument, SIGNAL(docModified(bool)), this, SLOT(slotUpdateDocumentState(bool)));
- disconnect(m_effectStack, SIGNAL(updateClipEffect(ClipItem*, QDomElement, QDomElement, int)), m_activeTimeline->projectView(), SLOT(slotUpdateClipEffect(ClipItem*, QDomElement, QDomElement, int)));
- disconnect(m_effectStack, SIGNAL(removeEffect(ClipItem*, QDomElement)), m_activeTimeline->projectView(), SLOT(slotDeleteEffect(ClipItem*, QDomElement)));
- disconnect(m_effectStack, SIGNAL(changeEffectState(ClipItem*, int, bool)), m_activeTimeline->projectView(), SLOT(slotChangeEffectState(ClipItem*, int, bool)));
- disconnect(m_effectStack, SIGNAL(changeEffectPosition(ClipItem*, int, int)), m_activeTimeline->projectView(), SLOT(slotChangeEffectPosition(ClipItem*, int, int)));
+ disconnect(m_effectStack, SIGNAL(updateEffect(ClipItem*, int, QDomElement, QDomElement, int)), m_activeTimeline->projectView(), SLOT(slotUpdateClipEffect(ClipItem*, int, QDomElement, QDomElement, int)));
+ disconnect(m_effectStack, SIGNAL(removeEffect(ClipItem*, int, QDomElement)), m_activeTimeline->projectView(), SLOT(slotDeleteEffect(ClipItem*, int, QDomElement)));
+ disconnect(m_effectStack, SIGNAL(changeEffectState(ClipItem*, int, int, bool)), m_activeTimeline->projectView(), SLOT(slotChangeEffectState(ClipItem*, int, int, bool)));
+ disconnect(m_effectStack, SIGNAL(changeEffectPosition(ClipItem*, int, int, int)), m_activeTimeline->projectView(), SLOT(slotChangeEffectPosition(ClipItem*, int, int, int)));
disconnect(m_effectStack, SIGNAL(refreshEffectStack(ClipItem*)), m_activeTimeline->projectView(), SLOT(slotRefreshEffects(ClipItem*)));
disconnect(m_effectStack, SIGNAL(reloadEffects()), this, SLOT(slotReloadEffects()));
+ disconnect(m_effectStack, SIGNAL(displayMessage(const QString&, int)), this, SLOT(slotGotProgressInfo(const QString&, int)));
disconnect(m_transitionConfig, SIGNAL(transitionUpdated(Transition *, QDomElement)), m_activeTimeline->projectView() , SLOT(slotTransitionUpdated(Transition *, QDomElement)));
disconnect(m_transitionConfig, SIGNAL(seekTimeline(int)), m_activeTimeline->projectView() , SLOT(setCursorPos(int)));
disconnect(m_activeTimeline->projectView(), SIGNAL(activateDocumentMonitor()), m_projectMonitor, SLOT(activateMonitor()));
connect(trackView, SIGNAL(configTrack(int)), this, SLOT(slotConfigTrack(int)));
connect(trackView, SIGNAL(updateTracksInfo()), this, SLOT(slotUpdateTrackInfo()));
connect(trackView, SIGNAL(mousePosition(int)), this, SLOT(slotUpdateMousePosition(int)));
+ connect(trackView->projectView(), SIGNAL(forceClipProcessing(const QString &)), m_projectList, SLOT(slotForceProcessing(const QString &)));
connect(m_projectMonitor, SIGNAL(renderPosition(int)), trackView, SLOT(moveCursorPos(int)));
connect(m_projectMonitor, SIGNAL(zoneUpdated(QPoint)), trackView, SLOT(slotSetZone(QPoint)));
connect(m_clipMonitor, SIGNAL(zoneUpdated(QPoint)), m_projectList, SLOT(slotUpdateClipCut(QPoint)));
connect(trackView->projectView(), SIGNAL(clipItemSelected(ClipItem*, int)), m_effectStack, SLOT(slotClipItemSelected(ClipItem*, int)));
connect(trackView->projectView(), SIGNAL(updateClipMarkers(DocClipBase *)), this, SLOT(slotUpdateClipMarkers(DocClipBase*)));
+ connect(trackView, SIGNAL(showTrackEffects(int, TrackInfo)), m_effectStack, SLOT(slotTrackItemSelected(int, TrackInfo)));
+ connect(trackView, SIGNAL(showTrackEffects(int, TrackInfo)), this, SLOT(slotActivateEffectStackView()));
connect(trackView->projectView(), SIGNAL(clipItemSelected(ClipItem*, int)), this, SLOT(slotActivateEffectStackView()));
connect(trackView->projectView(), SIGNAL(transitionItemSelected(Transition*, int, QPoint, bool)), m_transitionConfig, SLOT(slotTransitionItemSelected(Transition*, int, QPoint, bool)));
connect(trackView->projectView(), SIGNAL(playMonitor()), m_projectMonitor, SLOT(slotPlay()));
- connect(m_effectStack, SIGNAL(updateClipEffect(ClipItem*, QDomElement, QDomElement, int)), trackView->projectView(), SLOT(slotUpdateClipEffect(ClipItem*, QDomElement, QDomElement, int)));
+ connect(m_effectStack, SIGNAL(updateEffect(ClipItem*, int, QDomElement, QDomElement, int)), trackView->projectView(), SLOT(slotUpdateClipEffect(ClipItem*, int, QDomElement, QDomElement, int)));
connect(m_effectStack, SIGNAL(updateClipRegion(ClipItem*, int, QString)), trackView->projectView(), SLOT(slotUpdateClipRegion(ClipItem*, int, QString)));
- connect(m_effectStack, SIGNAL(removeEffect(ClipItem*, QDomElement)), trackView->projectView(), SLOT(slotDeleteEffect(ClipItem*, QDomElement)));
- connect(m_effectStack, SIGNAL(changeEffectState(ClipItem*, int, bool)), trackView->projectView(), SLOT(slotChangeEffectState(ClipItem*, int, bool)));
- connect(m_effectStack, SIGNAL(changeEffectPosition(ClipItem*, int, int)), trackView->projectView(), SLOT(slotChangeEffectPosition(ClipItem*, int, int)));
+ connect(m_effectStack, SIGNAL(removeEffect(ClipItem*, int, QDomElement)), trackView->projectView(), SLOT(slotDeleteEffect(ClipItem*, int, QDomElement)));
+ connect(m_effectStack, SIGNAL(changeEffectState(ClipItem*, int, int, bool)), trackView->projectView(), SLOT(slotChangeEffectState(ClipItem*, int, int, bool)));
+ connect(m_effectStack, SIGNAL(changeEffectPosition(ClipItem*, int, int, int)), trackView->projectView(), SLOT(slotChangeEffectPosition(ClipItem*, int, int, int)));
connect(m_effectStack, SIGNAL(refreshEffectStack(ClipItem*)), trackView->projectView(), SLOT(slotRefreshEffects(ClipItem*)));
connect(m_transitionConfig, SIGNAL(transitionUpdated(Transition *, QDomElement)), trackView->projectView() , SLOT(slotTransitionUpdated(Transition *, QDomElement)));
connect(m_transitionConfig, SIGNAL(seekTimeline(int)), trackView->projectView() , SLOT(setCursorPos(int)));
connect(m_effectStack, SIGNAL(seekTimeline(int)), trackView->projectView() , SLOT(setCursorPos(int)));
connect(m_effectStack, SIGNAL(reloadEffects()), this, SLOT(slotReloadEffects()));
+ connect(m_effectStack, SIGNAL(displayMessage(const QString&, int)), this, SLOT(slotGotProgressInfo(const QString&, int)));
connect(trackView->projectView(), SIGNAL(activateDocumentMonitor()), m_projectMonitor, SLOT(activateMonitor()));
connect(trackView, SIGNAL(zoneMoved(int, int)), this, SLOT(slotZoneMoved(int, int)));
m_renderWidget->setProfile(doc->mltProfile());
m_renderWidget->setGuides(doc->guidesXml(), doc->projectDuration());
m_renderWidget->setDocumentPath(doc->projectFolder().path(KUrl::AddTrailingSlash));
- m_renderWidget->setRenderProfile(doc->getDocumentProperty("renderdestination"), doc->getDocumentProperty("rendercategory"), doc->getDocumentProperty("renderprofile"), doc->getDocumentProperty("renderurl"), doc->getDocumentProperty("renderzone") == "1", doc->getDocumentProperty("renderguide") == "1", doc->getDocumentProperty("startguide").toInt(), doc->getDocumentProperty("endguide").toInt());
+ m_renderWidget->setRenderProfile(doc->getRenderProperties());
}
//doc->setRenderer(m_projectMonitor->render);
m_commandStack->setActiveStack(doc->commandStack());
}
m_buttonAudioThumbs->setChecked(KdenliveSettings::audiothumbnails());
m_buttonVideoThumbs->setChecked(KdenliveSettings::videothumbnails());
+ m_buttonShowMarkers->setChecked(KdenliveSettings::showmarkers());
m_buttonAutomaticSplitAudio->setChecked(KdenliveSettings::splitaudio());
// Update list of transcoding profiles
/** Gets called when the window gets hidden */
void MainWindow::hideEvent(QHideEvent */*event*/)
{
- if (isMinimized())
- if (m_monitorManager)
- m_monitorManager->stopActiveMonitor();
+ if (isMinimized() && m_monitorManager)
+ m_monitorManager->stopActiveMonitor();
}
bool MainWindow::eventFilter(QObject *obj, QEvent *event)
slotTranscode(urls);
}
-void MainWindow::slotSetDocumentRenderProfile(const QString &dest, const QString &group, const QString &name, const QString &file, bool renderZone, bool renderGuide, int startGuide, int endGuide)
+void MainWindow::slotSetDocumentRenderProfile(QMap <QString, QString> props)
{
if (m_activeDocument == NULL) return;
- m_activeDocument->setDocumentProperty("renderdestination", dest);
- m_activeDocument->setDocumentProperty("rendercategory", group);
- m_activeDocument->setDocumentProperty("renderprofile", name);
- m_activeDocument->setDocumentProperty("renderurl", file);
- m_activeDocument->setDocumentProperty("renderzone", QString::number(renderZone));
- m_activeDocument->setDocumentProperty("renderguide", QString::number(renderGuide));
- m_activeDocument->setDocumentProperty("startguide", QString::number(startGuide));
- m_activeDocument->setDocumentProperty("endguide", QString::number(endGuide));
+ QMapIterator<QString, QString> i(props);
+ while (i.hasNext()) {
+ i.next();
+ m_activeDocument->setDocumentProperty(i.key(), i.value());
+ }
m_activeDocument->setModified(true);
}
{
if (KMessageBox::warningContinueCancel(this, i18n("This will delete all changes made since you last saved your project. Are you sure you want to continue?"), i18n("Revert to last saved version")) == KMessageBox::Cancel) return;
KUrl url = m_activeDocument->url();
- closeCurrentDocument(false);
- doOpenFile(url, NULL);
+ if (closeCurrentDocument(false))
+ doOpenFile(url, NULL);
}
return mimetype;
}
+void MainWindow::slotMonitorRequestRenderFrame(bool request)
+{
+ if (request) {
+ m_projectMonitor->render->sendFrameForAnalysis = true;
+ return;
+ } else {
+ for (int i = 0; i < m_scopesList.count(); i++) {
+ if (m_scopesList.at(i)->isVisible() && tabifiedDockWidgets(m_scopesList.at(i)).isEmpty() && static_cast<AbstractScopeWidget *>(m_scopesList.at(i)->widget())->autoRefreshEnabled()) {
+ request = true;
+ break;
+ }
+ }
+ }
+ if (!request) {
+ m_projectMonitor->render->sendFrameForAnalysis = false;
+ }
+}
+
+void MainWindow::slotUpdateScopeFrameRequest()
+{
+ // We need a delay to make sure widgets are hidden after a close event for example
+ QTimer::singleShot(500, this, SLOT(slotDoUpdateScopeFrameRequest()));
+}
+
+void MainWindow::slotDoUpdateScopeFrameRequest()
+{
+ // Check scopes
+ bool request = false;
+ for (int i = 0; i < m_scopesList.count(); i++) {
+ if (!m_scopesList.at(i)->widget()->visibleRegion().isEmpty() && static_cast<AbstractScopeWidget *>(m_scopesList.at(i)->widget())->autoRefreshEnabled()) {
+ kDebug() << "SCOPE VISIBLE: " << static_cast<AbstractScopeWidget *>(m_scopesList.at(i)->widget())->widgetName();
+ request = true;
+ break;
+ }
+ }
+ if (!request) {
+ if (!m_projectMonitor->effectSceneDisplayed())
+ m_projectMonitor->render->sendFrameForAnalysis = false;
+ m_clipMonitor->render->sendFrameForAnalysis = false;
+ } else {
+ m_projectMonitor->render->sendFrameForAnalysis = true;
+ m_clipMonitor->render->sendFrameForAnalysis = true;
+ }
+}
+
+void MainWindow::slotUpdateColorScopes()
+{
+ bool request = false;
+ for (int i = 0; i < m_scopesList.count(); i++) {
+ // Check if we need the renderer to send a new frame for update
+ if (!m_scopesList.at(i)->widget()->visibleRegion().isEmpty() && !(static_cast<AbstractScopeWidget *>(m_scopesList.at(i)->widget())->autoRefreshEnabled())) request = true;
+ static_cast<AbstractScopeWidget *>(m_scopesList.at(i)->widget())->slotActiveMonitorChanged(m_clipMonitor->isActive());
+ }
+ if (request) {
+ if (m_clipMonitor->isActive()) m_clipMonitor->render->sendFrameUpdate();
+ else m_projectMonitor->render->sendFrameUpdate();
+ }
+}
+
#include "mainwindow.moc"
projects / kdenlive / blobdiff