#include "interfaces.h"
#include "kdenlive-config.h"
#include "cliptranscode.h"
+#include "ui_templateclip_ui.h"
#include <KApplication>
#include <KAction>
#include <kstandarddirs.h>
#include <KUrlRequesterDialog>
#include <KTemporaryFile>
+#include <KProcess>
#include <KActionMenu>
#include <KMenu>
#include <locale.h>
#include <QTimer>
#include <QAction>
#include <QKeyEvent>
+#include <QInputDialog>
#include <stdlib.h>
m_projectListDock->setWidget(m_projectList);
addDockWidget(Qt::TopDockWidgetArea, m_projectListDock);
+ m_shortcutRemoveFocus = new QShortcut(QKeySequence("Esc"), this);
+ connect(m_shortcutRemoveFocus, SIGNAL(activated()), this, SLOT(slotRemoveFocus()));
+
m_effectListDock = new QDockWidget(i18n("Effect List"), this);
m_effectListDock->setObjectName("effect_list");
m_effectList = new EffectsListView();
actionCollection());
readOptions();
+ //slotDetectAudioDriver();
+
m_clipMonitorDock = new QDockWidget(i18n("Clip Monitor"), this);
m_clipMonitorDock->setObjectName("clip_monitor");
m_clipMonitor = new Monitor("clip", m_monitorManager, this);
m_timelineContextMenu->addAction(actionCollection()->action(KStandardAction::name(KStandardAction::Paste)));
m_timelineContextClipMenu->addAction(actionCollection()->action("delete_timeline_clip"));
- m_timelineContextClipMenu->addAction(actionCollection()->action("change_clip_speed"));
m_timelineContextClipMenu->addAction(actionCollection()->action("group_clip"));
m_timelineContextClipMenu->addAction(actionCollection()->action("ungroup_clip"));
m_timelineContextClipMenu->addAction(actionCollection()->action("cut_timeline_clip"));
connect(m_clipMonitorDock, SIGNAL(visibilityChanged(bool)), m_clipMonitor, SLOT(refreshMonitor(bool)));
//connect(m_monitorManager, SIGNAL(connectMonitors()), this, SLOT(slotConnectMonitors()));
connect(m_monitorManager, SIGNAL(raiseClipMonitor(bool)), this, SLOT(slotRaiseMonitor(bool)));
- connect(m_effectList, SIGNAL(addEffect(QDomElement)), this, SLOT(slotAddEffect(QDomElement)));
+ connect(m_effectList, SIGNAL(addEffect(const QDomElement)), this, SLOT(slotAddEffect(const QDomElement)));
connect(m_effectList, SIGNAL(reloadEffects()), this, SLOT(slotReloadEffects()));
m_monitorManager->initMonitors(m_clipMonitor, m_projectMonitor);
void MainWindow::queryQuit()
{
- kDebug() << "----- SAVING CONFUIG";
- if (queryClose()) kapp->quit();
+ if (queryClose()) {
+ if (m_projectMonitor) m_projectMonitor->stop();
+ if (m_clipMonitor) m_clipMonitor->stop();
+ delete m_effectStack;
+ delete m_activeTimeline;
+ delete m_projectMonitor;
+ delete m_clipMonitor;
+ delete m_activeDocument;
+ delete m_shortcutRemoveFocus;
+ Mlt::Factory::close();
+ kapp->quit();
+ }
}
//virtual
bool MainWindow::queryClose()
{
+ if (m_renderWidget) {
+ int waitingJobs = m_renderWidget->waitingJobsCount();
+ if (waitingJobs > 0) {
+ switch (KMessageBox::warningYesNoCancel(this, i18n("You have %1 rendering jobs waiting in the queue.\nWhat do you want to do with these jobs?", waitingJobs), QString(), KGuiItem(i18n("Start them now")), KGuiItem(i18n("Delete them")))) {
+ case KMessageBox::Yes :
+ // create script with waiting jobs and start it
+ if (m_renderWidget->startWaitingRenderJobs() == false) return false;
+ break;
+ case KMessageBox::No :
+ // Don't do anything, jobs will be deleted
+ break;
+ default:
+ return false;
+ }
+ }
+ }
saveOptions();
if (m_monitorManager) m_monitorManager->stopActiveMonitor();
if (m_activeDocument && m_activeDocument->isModified()) {
}
}
-void MainWindow::saveProperties(KConfig*)
+void MainWindow::saveProperties(KConfigGroup &config)
{
// save properties here,used by session management
saveFile();
+ KMainWindow::saveProperties(config);
}
-void MainWindow::readProperties(KConfig *config)
+void MainWindow::readProperties(const KConfigGroup &config)
{
// read properties here,used by session management
- QString Lastproject = config->group("Recent Files").readPathEntry("File1", QString());
+ KMainWindow::readProperties(config);
+ QString Lastproject = config.group("Recent Files").readPathEntry("File1", QString());
openFile(KUrl(Lastproject));
}
KToggleFullScreenAction::setFullScreen(this, actionCollection()->action("fullscreen")->isChecked());
}
-void MainWindow::slotAddEffect(QDomElement effect, GenTime pos, int track)
+void MainWindow::slotAddEffect(const QDomElement effect, GenTime pos, int track)
{
if (!m_activeDocument) return;
if (effect.isNull()) {
kDebug() << "--- ERROR, TRYING TO APPEND NULL EFFECT";
return;
}
- m_activeTimeline->projectView()->slotAddEffect(effect.cloneNode().toElement(), pos, track);
+ QDomElement effectToAdd = effect.cloneNode().toElement();
+ m_activeTimeline->projectView()->slotAddEffect(effectToAdd, pos, track);
}
void MainWindow::slotRaiseMonitor(bool clipMonitor)
m_projectList->setRenderer(m_projectMonitor->render);
connect(m_projectList, SIGNAL(receivedClipDuration(const QString &)), this, SLOT(slotUpdateClip(const QString &)));
connect(m_projectList, SIGNAL(showClipProperties(DocClipBase *)), this, SLOT(slotShowClipProperties(DocClipBase *)));
- connect(m_projectList, SIGNAL(getFileProperties(const QDomElement &, const QString &, bool)), m_projectMonitor->render, SLOT(getFileProperties(const QDomElement &, const QString &, bool)));
+ connect(m_projectList, SIGNAL(getFileProperties(const QDomElement, const QString &, bool)), m_projectMonitor->render, SLOT(getFileProperties(const QDomElement, const QString &, bool)));
connect(m_projectMonitor->render, SIGNAL(replyGetImage(const QString &, const QPixmap &)), m_projectList, SLOT(slotReplyGetImage(const QString &, const QPixmap &)));
connect(m_projectMonitor->render, SIGNAL(replyGetFileProperties(const QString &, Mlt::Producer*, const QMap < QString, QString > &, const QMap < QString, QString > &, bool)), m_projectList, SLOT(slotReplyGetFileProperties(const QString &, Mlt::Producer*, const QMap < QString, QString > &, const QMap < QString, QString > &, bool)));
m_timecodeFormat = new KComboBox(this);
m_timecodeFormat->addItem(i18n("hh:mm:ss::ff"));
m_timecodeFormat->addItem(i18n("Frames"));
+ if (KdenliveSettings::frametimecode()) m_timecodeFormat->setCurrentIndex(1);
+ connect(m_timecodeFormat, SIGNAL(activated(int)), this, SLOT(slotUpdateTimecodeFormat(int)));
m_statusProgressBar = new QProgressBar(this);
m_statusProgressBar->setMinimum(0);
QString style1 = "QToolButton {background-color: rgba(230, 230, 230, 220); border-style: inset; border:1px solid #999999;border-radius: 3px;margin: 0px 3px;padding: 0px;} QToolButton:checked { background-color: rgba(224, 224, 0, 100); border-style: inset; border:1px solid #cc6666;border-radius: 3px;}";
m_buttonSelectTool = new KAction(KIcon("kdenlive-select-tool"), i18n("Selection tool"), this);
+ m_buttonSelectTool->setShortcut(i18nc("Selection tool shortcut", "s"));
toolbar->addAction(m_buttonSelectTool);
m_buttonSelectTool->setCheckable(true);
m_buttonSelectTool->setChecked(true);
m_buttonRazorTool = new KAction(KIcon("edit-cut"), i18n("Razor tool"), this);
+ m_buttonRazorTool->setShortcut(i18nc("Razor tool shortcut", "x"));
toolbar->addAction(m_buttonRazorTool);
m_buttonRazorTool->setCheckable(true);
m_buttonRazorTool->setChecked(false);
m_buttonSpacerTool = new KAction(KIcon("kdenlive-spacer-tool"), i18n("Spacer tool"), this);
+ m_buttonSpacerTool->setShortcut(i18nc("Spacer tool shortcut", "m"));
toolbar->addAction(m_buttonSpacerTool);
m_buttonSpacerTool->setCheckable(true);
m_buttonSpacerTool->setChecked(false);
statusBar()->insertPermanentFixedItem("00:00:00:00", ID_TIMELINE_POS);
statusBar()->addPermanentWidget(m_timecodeFormat);
statusBar()->setMaximumHeight(statusBar()->font().pointSize() * 4);
- m_messageLabel->hide();
collection->addAction("select_tool", m_buttonSelectTool);
collection->addAction("razor_tool", m_buttonRazorTool);
collection->addAction("manage_profiles", profilesAction);
connect(profilesAction, SIGNAL(triggered(bool)), this, SLOT(slotEditProfiles()));
- KNS::standardAction(i18n("Download New Lumas..."), this, SLOT(slotGetNewLumaStuff()), actionCollection(), "get_new_lumas");
+ KNS::standardAction(i18n("Download New Wipes..."), this, SLOT(slotGetNewLumaStuff()), actionCollection(), "get_new_lumas");
KNS::standardAction(i18n("Download New Render Profiles..."), this, SLOT(slotGetNewRenderStuff()), actionCollection(), "get_new_profiles");
collection->addAction("delete_timeline_clip", deleteTimelineClip);
connect(deleteTimelineClip, SIGNAL(triggered(bool)), this, SLOT(slotDeleteTimelineClip()));
- KAction* editTimelineClipSpeed = new KAction(i18n("Change Clip Speed"), this);
+ /*KAction* editTimelineClipSpeed = new KAction(i18n("Change Clip Speed"), this);
collection->addAction("change_clip_speed", editTimelineClipSpeed);
editTimelineClipSpeed->setData("change_speed");
- connect(editTimelineClipSpeed, SIGNAL(triggered(bool)), this, SLOT(slotChangeClipSpeed()));
+ connect(editTimelineClipSpeed, SIGNAL(triggered(bool)), this, SLOT(slotChangeClipSpeed()));*/
KAction *stickTransition = collection->addAction("auto_transition");
stickTransition->setData(QString("auto"));
connect(stickTransition, SIGNAL(triggered(bool)), this, SLOT(slotAutoTransition()));
KAction* groupClip = new KAction(KIcon("object-group"), i18n("Group Clips"), this);
+ groupClip->setShortcut(Qt::CTRL + Qt::Key_G);
collection->addAction("group_clip", groupClip);
connect(groupClip, SIGNAL(triggered(bool)), this, SLOT(slotGroupClips()));
KAction* ungroupClip = new KAction(KIcon("object-ungroup"), i18n("Ungroup Clips"), this);
collection->addAction("ungroup_clip", ungroupClip);
+ ungroupClip->setShortcut(Qt::CTRL + Qt::SHIFT + Qt::Key_G);
ungroupClip->setData("ungroup_clip");
connect(ungroupClip, SIGNAL(triggered(bool)), this, SLOT(slotUnGroupClips()));
collection->addAction("add_text_clip", addTitleClip);
connect(addTitleClip , SIGNAL(triggered()), m_projectList, SLOT(slotAddTitleClip()));
+ QAction *addTitleTemplateClip = new KAction(KIcon("kdenlive-add-text-clip"), i18n("Add Template Title"), this);
+ collection->addAction("add_text_template_clip", addTitleTemplateClip);
+ connect(addTitleTemplateClip , SIGNAL(triggered()), m_projectList, SLOT(slotAddTitleTemplateClip()));
+
QAction *addFolderButton = new KAction(KIcon("folder-new"), i18n("Create Folder"), this);
collection->addAction("add_folder", addFolderButton);
connect(addFolderButton , SIGNAL(triggered()), m_projectList, SLOT(slotAddFolder()));
addClips->addAction(addColorClip);
addClips->addAction(addSlideClip);
addClips->addAction(addTitleClip);
+ addClips->addAction(addTitleTemplateClip);
addClips->addAction(addFolderButton);
addClips->addAction(reloadClip);
KConfigGroup initialGroup(config, "version");
bool upgrade = false;
if (initialGroup.exists()) {
- if (initialGroup.readEntry("version", QString()).section(' ', 0, 0) != QString(version).section(' ', 0, 0))
+ if (initialGroup.readEntry("version", QString()).section(' ', 0, 0) != QString(version).section(' ', 0, 0)) {
upgrade = true;
+ }
if (initialGroup.readEntry("version") == "0.7") {
//Add new settings from 0.7.1
if (KdenliveSettings::defaultprojectfolder().isEmpty()) {
QString path = QDir::homePath() + "/kdenlive";
- if (KStandardDirs::makeDir(path) == false) kDebug() << "/// ERROR CREATING PROJECT FOLDER: " << path;
- KdenliveSettings::setDefaultprojectfolder(path);
+ if (KStandardDirs::makeDir(path) == false) {
+ kDebug() << "/// ERROR CREATING PROJECT FOLDER: " << path;
+ } else KdenliveSettings::setDefaultprojectfolder(path);
}
}
void MainWindow::newFile(bool showProjectSettings)
{
+ if (!m_timelineArea->isEnabled()) return;
QString profileName;
KUrl projectFolder;
QPoint projectTracks(KdenliveSettings::videotracks(), KdenliveSettings::audiotracks());
if (!showProjectSettings && m_timelineArea->count() == 0) {
if (!KdenliveSettings::activatetabs()) closeCurrentDocument();
profileName = KdenliveSettings::default_profile();
+ projectFolder = KdenliveSettings::defaultprojectfolder();
} else {
ProjectSettings *w = new ProjectSettings(projectTracks.x(), projectTracks.y(), KdenliveSettings::defaultprojectfolder(), false, this);
if (w->exec() != QDialog::Accepted) return;
}
KdenliveDoc *doc = new KdenliveDoc(KUrl(), projectFolder, m_commandStack, profileName, projectTracks, m_projectMonitor->render, this);
doc->m_autosave = new KAutoSaveFile(KUrl(), doc);
- TrackView *trackView = new TrackView(doc, this);
+ bool ok;
+ TrackView *trackView = new TrackView(doc, &ok, this);
m_timelineArea->addTab(trackView, KIcon("kdenlive"), doc->description());
+ if (!ok) {
+ // MLT is broken
+ m_timelineArea->setEnabled(false);
+ m_projectList->setEnabled(false);
+ m_monitorManager->slotBlockMonitors();
+ slotPreferences(6);
+ return;
+ }
if (m_timelineArea->count() == 1) {
connectDocumentInfo(doc);
connectDocument(trackView, doc);
void MainWindow::activateDocument()
{
- if (m_timelineArea->currentWidget() == NULL) return;
+ if (m_timelineArea->currentWidget() == NULL || !m_timelineArea->isEnabled()) return;
TrackView *currentTab = (TrackView *) m_timelineArea->currentWidget();
KdenliveDoc *currentDoc = currentTab->document();
connectDocumentInfo(currentDoc);
delete m_activeDocument;
m_activeDocument = NULL;
m_effectStack->clear();
- m_transitionConfig->slotTransitionItemSelected(NULL, QPoint(), false);
+ m_transitionConfig->slotTransitionItemSelected(NULL, 0, QPoint(), false);
} else delete docToClose;
if (w == m_activeTimeline) {
delete m_activeTimeline;
void MainWindow::doOpenFile(const KUrl &url, KAutoSaveFile *stale)
{
- KdenliveDoc *doc = new KdenliveDoc(url, KUrl(), m_commandStack, QString(), QPoint(3, 2), m_projectMonitor->render, this);
+ if (!m_timelineArea->isEnabled()) return;
+ KdenliveDoc *doc = new KdenliveDoc(url, KdenliveSettings::defaultprojectfolder(), m_commandStack, KdenliveSettings::default_profile(), QPoint(KdenliveSettings::videotracks(), KdenliveSettings::audiotracks()), m_projectMonitor->render, this);
if (stale == NULL) {
stale = new KAutoSaveFile(url, doc);
doc->m_autosave = stale;
stale->setParent(doc);
}
connectDocumentInfo(doc);
- TrackView *trackView = new TrackView(doc, this);
+ bool ok;
+ TrackView *trackView = new TrackView(doc, &ok, this);
m_timelineArea->setCurrentIndex(m_timelineArea->addTab(trackView, KIcon("kdenlive"), doc->description()));
+ if (!ok) {
+ m_timelineArea->setEnabled(false);
+ m_projectList->setEnabled(false);
+ m_monitorManager->slotBlockMonitors();
+ slotPreferences(6);
+ return;
+ }
m_timelineArea->setTabToolTip(m_timelineArea->currentIndex(), doc->url().path());
trackView->setDuration(trackView->duration());
trackView->projectView()->initCursorPos(m_projectMonitor->render->seekPosition().frames(doc->fps()));
KUrl mltPath = getUrl->selectedUrl();
delete getUrl;
if (mltPath.isEmpty()) ::exit(0);
- KdenliveSettings::setMltpath(mltPath.path());
+ KdenliveSettings::setMltpath(mltPath.path(KUrl::AddTrailingSlash));
QStringList profilesList = QDir(KdenliveSettings::mltpath()).entryList(profilesFilter, QDir::Files);
}
}
delete w;
}
+void MainWindow::slotDetectAudioDriver()
+{
+ /* WARNING: do not use this method because sometimes detects wrong driver (pulse instead of alsa),
+ leading to no audio output, see bug #934 */
+
+ //decide which audio driver is really best, in some cases SDL is wrong
+ if (KdenliveSettings::audiodrivername().isEmpty()) {
+ QString driver;
+ KProcess readProcess;
+ //PulseAudio needs to be selected if it exists, the ALSA pulse pcm device is not fast enough.
+ if (!KStandardDirs::findExe("pactl").isEmpty()) {
+ readProcess.setOutputChannelMode(KProcess::OnlyStdoutChannel);
+ readProcess.setProgram("pactl", QStringList() << "stat");
+ readProcess.execute(2000); // Kill it after 2 seconds
+
+ QString result = QString(readProcess.readAllStandardOutput());
+ kDebug() << "// / / / / / READING PACTL: ";
+ kDebug() << result;
+ if (!result.isEmpty()) {
+ driver = "pulse";
+ kDebug() << "// / / / / PULSEAUDIO DETECTED";
+ }
+ }
+ //put others here
+ KdenliveSettings::setAutoaudiodrivername(driver);
+ }
+}
+
void MainWindow::slotEditProjectSettings()
{
QPoint p = m_activeDocument->getTracksCount();
if (w->exec() == QDialog::Accepted) {
QString profile = w->selectedProfile();
m_activeDocument->setProjectFolder(w->selectedFolder());
- if (m_renderWidget) m_renderWidget->setDocumentPath(w->selectedFolder().path());
+ if (m_renderWidget) m_renderWidget->setDocumentPath(w->selectedFolder().path(KUrl::AddTrailingSlash));
if (m_activeDocument->profilePath() != profile) {
// Profile was changed
double dar = m_activeDocument->dar();
+
+ // Deselect current effect / transition
+ m_effectStack->slotClipItemSelected(NULL, 0);
+ m_transitionConfig->slotTransitionItemSelected(NULL, 0, QPoint(), false);
+ m_clipMonitor->slotSetXml(NULL, 0);
m_activeDocument->setProfilePath(profile);
KdenliveSettings::setCurrent_profile(profile);
KdenliveSettings::setProject_fps(m_activeDocument->fps());
setCaption(m_activeDocument->description(), m_activeDocument->isModified());
+
+ m_activeDocument->clipManager()->clearUnusedProducers();
m_monitorManager->resetProfiles(m_activeDocument->timecode());
+
+ m_transitionConfig->updateProjectFormat(m_activeDocument->mltProfile(), m_activeDocument->timecode(), m_activeTimeline->tracksNumber());
+ m_effectStack->updateProjectFormat(m_activeDocument->mltProfile(), m_activeDocument->timecode());
if (m_renderWidget) m_renderWidget->setProfile(m_activeDocument->mltProfile());
m_timelineArea->setTabText(m_timelineArea->currentIndex(), m_activeDocument->description());
- m_activeDocument->clipManager()->resetProducersList(m_projectMonitor->render->producersList());
+ //m_activeDocument->clipManager()->resetProducersList(m_projectMonitor->render->producersList());
if (dar != m_activeDocument->dar()) m_projectList->reloadClipThumbnails();
+ m_activeTimeline->updateProjectFps();
+
// We need to desactivate & reactivate monitors to get a refresh
- m_monitorManager->switchMonitors();
+ //m_monitorManager->switchMonitors();
}
}
delete w;
void MainWindow::slotRenderProject()
{
if (!m_renderWidget) {
- QString projectfolder = m_activeDocument ? m_activeDocument->projectFolder().path() : KdenliveSettings::defaultprojectfolder();
+ QString projectfolder = m_activeDocument ? m_activeDocument->projectFolder().path(KUrl::AddTrailingSlash) : KdenliveSettings::defaultprojectfolder();
m_renderWidget = new RenderWidget(projectfolder, this);
- connect(m_renderWidget, SIGNAL(doRender(const QStringList&, const QStringList&)), this, SLOT(slotDoRender(const QStringList&, const QStringList&)));
+ connect(m_renderWidget, SIGNAL(selectedRenderProfile(const QString &, const QString &, const QString&)), this, SLOT(slotSetDocumentRenderProfile(const QString &, const QString &, const QString&)));
+ connect(m_renderWidget, SIGNAL(prepareRenderingData(bool, bool, const QString&)), this, SLOT(slotPrepareRendering(bool, bool, const QString&)));
connect(m_renderWidget, SIGNAL(abortProcess(const QString &)), this, SIGNAL(abortRenderJob(const QString &)));
connect(m_renderWidget, SIGNAL(openDvdWizard(const QString &, const QString &)), this, SLOT(slotDvdWizard(const QString &, const QString &)));
if (m_activeDocument) {
m_renderWidget->setProfile(m_activeDocument->mltProfile());
m_renderWidget->setGuides(m_activeDocument->guidesXml(), m_activeDocument->projectDuration());
+ m_renderWidget->setDocumentPath(m_activeDocument->projectFolder().path(KUrl::AddTrailingSlash));
+ m_renderWidget->setRenderProfile(m_activeDocument->getDocumentProperty("renderdestination"), m_activeDocument->getDocumentProperty("renderprofile"), m_activeDocument->getDocumentProperty("renderurl"));
}
}
/*TrackView *currentTab = (TrackView *) m_timelineArea->currentWidget();
if (currentTab) m_renderWidget->setTimeline(currentTab);
m_renderWidget->setDocument(m_activeDocument);*/
m_renderWidget->show();
-}
-
-void MainWindow::slotDoRender(const QStringList args, const QStringList overlay_args)
-{
- QString dest = args.at(0);
- QString render = args.at(1);
- QStringList avformat_args = args.at(2).split(' ');
- bool zoneOnly = args.at(3).toInt();
- bool playAfter = args.at(4).toInt();
- double guideStart = args.at(5).toDouble();
- double guideEnd = args.at(6).toDouble();
- bool resizeProfile = args.at(7).toInt();
- QString scriptExport = args.at(8);
- bool createChapterFile = args.at(9).toInt();
-
- if (dest.isEmpty()) return;
- int in = 0;
- int out = 0;
-
- if (m_activeTimeline && zoneOnly) {
- in = m_activeTimeline->inPoint();
- out = m_activeTimeline->outPoint();
- }
-
- KTemporaryFile temp;
- temp.setAutoRemove(false);
- temp.setSuffix(".mlt");
- if (!scriptExport.isEmpty() || temp.open()) {
- if (KdenliveSettings::dropbframes()) {
- KdenliveSettings::setDropbframes(false);
- m_activeDocument->clipManager()->updatePreviewSettings();
- if (!scriptExport.isEmpty()) m_projectMonitor->saveSceneList(scriptExport + ".mlt");
- else m_projectMonitor->saveSceneList(temp.fileName());
- KdenliveSettings::setDropbframes(true);
- m_activeDocument->clipManager()->updatePreviewSettings();
- } else {
- if (!scriptExport.isEmpty()) m_projectMonitor->saveSceneList(scriptExport + ".mlt");
- else m_projectMonitor->saveSceneList(temp.fileName());
- }
-
- QStringList args;
- if (scriptExport.isEmpty()) args << "-erase";
- if (KdenliveSettings::usekuiserver()) args << "-kuiserver";
- if (zoneOnly) args << "in=" + QString::number(in) << "out=" + QString::number(out);
- else if (guideStart != -1) {
- args << "in=" + QString::number(GenTime(guideStart).frames(m_activeDocument->fps())) << "out=" + QString::number(GenTime(guideEnd).frames(m_activeDocument->fps()));
- }
- if (!overlay_args.isEmpty()) args << "preargs=" + overlay_args.join(" ");
- QString videoPlayer = "-";
- if (playAfter) {
- videoPlayer = KdenliveSettings::defaultplayerapp();
- if (videoPlayer.isEmpty()) KMessageBox::sorry(this, i18n("Cannot play video after rendering because the default video player application is not set.\nPlease define it in Kdenlive settings dialog."));
- }
- if (!QFile::exists(KdenliveSettings::rendererpath())) {
- KMessageBox::sorry(this, i18n("Cannot find the melt program required for rendering (part of Mlt)"));
- setRenderingProgress(dest, -3);
- return;
- }
- args << KdenliveSettings::rendererpath() << m_activeDocument->profilePath() << render << videoPlayer;
-
- for (int i = 0; i < avformat_args.count(); i++) {
- if (avformat_args.at(i).startsWith("profile=")) {
- if (avformat_args.at(i).section('=', 1) != m_activeDocument->profilePath()) resizeProfile = true;
- break;
- }
- }
-
- if (resizeProfile) {
- // The rendering profile is different from project profile, so use MLT's special producer_consumer
- if (scriptExport.isEmpty()) args << "consumer:" + temp.fileName();
- else args << "consumer:$SOURCE";
- } else {
- if (scriptExport.isEmpty()) args << temp.fileName();
- else args << "$SOURCE";
- }
- if (scriptExport.isEmpty()) args << dest;
- else args << "$TARGET";
- args << avformat_args;
- QString renderer = QCoreApplication::applicationDirPath() + QString("/kdenlive_render");
- if (!QFile::exists(renderer)) renderer = "kdenlive_render";
- if (scriptExport.isEmpty()) {
- QProcess::startDetached(renderer, args);
- KNotification::event("RenderStarted", i18n("Rendering <i>%1</i> started", dest), QPixmap(), this);
- } else {
- // Generate script file
- QFile file(scriptExport);
- if (!file.open(QIODevice::WriteOnly | QIODevice::Text)) {
- KMessageBox::error(this, i18n("Cannot write to file %1", scriptExport));
- return;
- }
-
- QTextStream outStream(&file);
- outStream << "#! /bin/sh" << "\n" << "\n";
- outStream << "SOURCE=" << "\"" + scriptExport + ".mlt\"" << "\n";
- outStream << "TARGET=" << "\"" + dest + "\"" << "\n";
- outStream << renderer << " " << args.join(" ") << "\n" << "\n";
- if (file.error() != QFile::NoError) {
- KMessageBox::error(this, i18n("Cannot write to file %1", scriptExport));
- file.close();
- return;
- }
- file.close();
- QFile::setPermissions(scriptExport, file.permissions() | QFile::ExeUser);
- }
-
- if (createChapterFile) {
- QDomDocument doc;
- QDomElement chapters = doc.createElement("chapters");
- chapters.setAttribute("fps", m_activeDocument->fps());
- doc.appendChild(chapters);
-
- QDomElement guidesxml = m_activeDocument->guidesXml();
- if (!zoneOnly) out = (int) GenTime(m_activeDocument->projectDuration()).frames(m_activeDocument->fps());
-
- QDomNodeList nodes = guidesxml.elementsByTagName("guide");
- for (int i = 0; i < nodes.count(); i++) {
- QDomElement e = nodes.item(i).toElement();
- if (!e.isNull()) {
- QString comment = e.attribute("comment");
- int time = (int) GenTime(e.attribute("time").toDouble()).frames(m_activeDocument->fps());
- if (time >= in && time < out) {
- if (zoneOnly) time = time - in;
- QDomElement chapter = doc.createElement("chapter");
- chapters.appendChild(chapter);
- chapter.setAttribute("title", comment);
- chapter.setAttribute("time", time);
- }
- }
- }
- if (chapters.childNodes().count() > 0) {
- if (m_activeTimeline->projectView()->hasGuide(out, 0) == -1) {
- // Always insert a guide in pos 0
- QDomElement chapter = doc.createElement("chapter");
- chapters.insertBefore(chapter, QDomNode());
- chapter.setAttribute("title", i18n("Start"));
- chapter.setAttribute("time", "0");
- }
- // save chapters file
- QFile file(dest + ".dvdchapter");
- if (!file.open(QIODevice::WriteOnly | QIODevice::Text)) {
- kWarning() << "////// ERROR writing DVD CHAPTER file: " << dest + ".dvdchapter";
- } else {
- file.write(doc.toString().toUtf8());
- if (file.error() != QFile::NoError)
- kWarning() << "////// ERROR writing DVD CHAPTER file: " << dest + ".dvdchapter";
- file.close();
- }
- }
- }
- }
+ m_renderWidget->showNormal();
}
void MainWindow::setRenderingProgress(const QString &url, int progress)
disconnect(m_projectList, SIGNAL(projectModified()), m_activeDocument, SLOT(setModified()));
disconnect(m_projectMonitor->render, SIGNAL(refreshDocumentProducers()), m_activeDocument, SLOT(checkProjectClips()));
-
disconnect(m_activeDocument, SIGNAL(guidesUpdated()), this, SLOT(slotGuidesUpdated()));
disconnect(m_activeDocument, SIGNAL(addProjectClip(DocClipBase *, bool)), m_projectList, SLOT(slotAddClip(DocClipBase *, bool)));
disconnect(m_activeDocument, SIGNAL(resetProjectList()), m_projectList, SLOT(slotResetProjectList()));
disconnect(m_activeDocument, SIGNAL(deleteTimelineClip(const QString &)), m_activeTimeline, SLOT(slotDeleteClip(const QString &)));
disconnect(m_activeTimeline->projectView(), SIGNAL(clipItemSelected(ClipItem*, int)), m_effectStack, SLOT(slotClipItemSelected(ClipItem*, int)));
disconnect(m_activeTimeline->projectView(), SIGNAL(clipItemSelected(ClipItem*, int)), this, SLOT(slotActivateEffectStackView()));
- disconnect(m_activeTimeline, SIGNAL(transitionItemSelected(Transition*, QPoint, bool)), m_transitionConfig, SLOT(slotTransitionItemSelected(Transition*, QPoint, bool)));
- disconnect(m_activeTimeline, SIGNAL(transitionItemSelected(Transition*, QPoint, bool)), this, SLOT(slotActivateTransitionView(Transition *)));
+ disconnect(m_activeTimeline->projectView(), SIGNAL(transitionItemSelected(Transition*, int, QPoint, bool)), m_transitionConfig, SLOT(slotTransitionItemSelected(Transition*, int, QPoint, bool)));
+ disconnect(m_activeTimeline->projectView(), SIGNAL(transitionItemSelected(Transition*, int, QPoint, bool)), this, SLOT(slotActivateTransitionView(Transition *)));
disconnect(m_zoomSlider, SIGNAL(valueChanged(int)), m_activeTimeline, SLOT(slotChangeZoom(int)));
disconnect(m_activeTimeline->projectView(), SIGNAL(displayMessage(const QString&, MessageType)), m_messageLabel, SLOT(setMessage(const QString&, MessageType)));
disconnect(m_activeTimeline->projectView(), SIGNAL(showClipFrame(DocClipBase *, const int)), m_clipMonitor, SLOT(slotSetXml(DocClipBase *, const int)));
}
//m_activeDocument->setRenderer(NULL);
disconnect(m_projectList, SIGNAL(clipSelected(DocClipBase *)), m_clipMonitor, SLOT(slotSetXml(DocClipBase *)));
+ disconnect(m_projectList, SIGNAL(refreshClip()), m_clipMonitor, SLOT(refreshMonitor()));
m_clipMonitor->stop();
}
KdenliveSettings::setCurrent_profile(doc->profilePath());
m_transitionConfig->updateProjectFormat(doc->mltProfile(), doc->timecode(), trackView->tracksNumber());
m_effectStack->updateProjectFormat(doc->mltProfile(), doc->timecode());
connect(m_projectList, SIGNAL(clipSelected(DocClipBase *)), m_clipMonitor, SLOT(slotSetXml(DocClipBase *)));
+ connect(m_projectList, SIGNAL(refreshClip()), m_clipMonitor, SLOT(refreshMonitor()));
connect(m_projectList, SIGNAL(projectModified()), doc, SLOT(setModified()));
connect(m_projectList, SIGNAL(clipNameChanged(const QString, const QString)), trackView->projectView(), SLOT(clipNameChanged(const QString, const QString)));
connect(m_projectMonitor, SIGNAL(zoneUpdated(QPoint)), trackView, SLOT(slotSetZone(QPoint)));
connect(m_projectMonitor, SIGNAL(durationChanged(int)), trackView, SLOT(setDuration(int)));
connect(m_projectMonitor->render, SIGNAL(refreshDocumentProducers()), doc, SLOT(checkProjectClips()));
+
connect(doc, SIGNAL(addProjectClip(DocClipBase *, bool)), m_projectList, SLOT(slotAddClip(DocClipBase *, bool)));
connect(doc, SIGNAL(resetProjectList()), m_projectList, SLOT(slotResetProjectList()));
connect(doc, SIGNAL(signalDeleteProjectClip(const QString &)), m_projectList, SLOT(slotDeleteClip(const QString &)));
connect(trackView->projectView(), SIGNAL(clipItemSelected(ClipItem*, int)), m_effectStack, SLOT(slotClipItemSelected(ClipItem*, int)));
connect(trackView->projectView(), SIGNAL(clipItemSelected(ClipItem*, int)), this, SLOT(slotActivateEffectStackView()));
- connect(trackView, SIGNAL(transitionItemSelected(Transition*, QPoint, bool)), m_transitionConfig, SLOT(slotTransitionItemSelected(Transition*, QPoint, bool)));
- connect(trackView, SIGNAL(transitionItemSelected(Transition*, QPoint, bool)), this, SLOT(slotActivateTransitionView(Transition *)));
- m_zoomSlider->setValue(doc->zoom());
+ connect(trackView->projectView(), SIGNAL(transitionItemSelected(Transition*, int, QPoint, bool)), m_transitionConfig, SLOT(slotTransitionItemSelected(Transition*, int, QPoint, bool)));
+ connect(trackView->projectView(), SIGNAL(transitionItemSelected(Transition*, int, QPoint, bool)), this, SLOT(slotActivateTransitionView(Transition *)));
+ m_zoomSlider->setValue(doc->zoom().x());
connect(m_zoomSlider, SIGNAL(valueChanged(int)), trackView, SLOT(slotChangeZoom(int)));
connect(trackView->projectView(), SIGNAL(zoomIn()), this, SLOT(slotZoomIn()));
connect(trackView->projectView(), SIGNAL(zoomOut()), this, SLOT(slotZoomOut()));
m_activeTimeline = trackView;
if (m_renderWidget) {
m_renderWidget->setProfile(doc->mltProfile());
- m_renderWidget->setDocumentPath(doc->projectFolder().path());
+ m_renderWidget->setGuides(doc->guidesXml(), doc->projectDuration());
+ m_renderWidget->setDocumentPath(doc->projectFolder().path(KUrl::AddTrailingSlash));
+ m_renderWidget->setRenderProfile(doc->getDocumentProperty("renderdestination"), doc->getDocumentProperty("renderprofile"), doc->getDocumentProperty("renderurl"));
}
//doc->setRenderer(m_projectMonitor->render);
m_commandStack->setActiveStack(doc->commandStack());
KdenliveSettings::setProject_display_ratio(doc->dar());
- m_projectList->updateAllClips();
//doc->clipManager()->checkAudioThumbs();
//m_overView->setScene(trackView->projectScene());
setCaption(doc->description(), doc->isModified());
m_saveAction->setEnabled(doc->isModified());
m_activeDocument = doc;
+ m_activeTimeline->updateProjectFps();
+ m_projectList->updateAllClips();
if (KdenliveSettings::dropbframes()) slotUpdatePreviewSettings();
// set tool to select tool
// create it :
KdenliveSettingsDialog* dialog = new KdenliveSettingsDialog(this);
connect(dialog, SIGNAL(settingsChanged(const QString&)), this, SLOT(updateConfiguration()));
+ //connect(dialog, SIGNAL(doResetProfile()), this, SLOT(slotDetectAudioDriver()));
connect(dialog, SIGNAL(doResetProfile()), m_monitorManager, SLOT(slotResetProfiles()));
connect(dialog, SIGNAL(updatePreviewSettings()), this, SLOT(slotUpdatePreviewSettings()));
connect(dialog, SIGNAL(updateCaptureFolder()), m_recMonitor, SLOT(slotUpdateCaptureFolder()));
}
}
-void MainWindow::slotChangeClipSpeed()
-{
- if (m_activeTimeline) {
- m_activeTimeline->projectView()->changeClipSpeed();
- }
-}
-
void MainWindow::slotAddClipMarker()
{
DocClipBase *clip = NULL;
if (m_activeTimeline) {
ClipItem *item = m_activeTimeline->projectView()->getActiveClipUnderCursor();
if (item) {
- pos = m_projectMonitor->position() - item->startPos() + item->cropStart();
+ pos = (m_projectMonitor->position() - item->startPos() + item->cropStart()) / item->speed();
clip = item->baseClip();
}
}
if (m_activeTimeline) {
ClipItem *item = m_activeTimeline->projectView()->getActiveClipUnderCursor();
if (item) {
- pos = m_projectMonitor->position() - item->startPos() + item->cropStart();
+ pos = (m_projectMonitor->position() - item->startPos() + item->cropStart()) / item->speed();
clip = item->baseClip();
}
}
if (m_activeTimeline) {
ClipItem *item = m_activeTimeline->projectView()->getActiveClipUnderCursor();
if (item) {
- pos = m_projectMonitor->position() - item->startPos() + item->cropStart();
+ pos = (m_projectMonitor->position() - item->startPos() + item->cropStart()) / item->speed();
clip = item->baseClip();
}
}
void MainWindow::slotShowClipProperties(DocClipBase *clip)
{
if (clip->clipType() == TEXT) {
- QString titlepath = m_activeDocument->projectFolder().path() + "/titles/";
+ QString titlepath = m_activeDocument->projectFolder().path(KUrl::AddTrailingSlash) + "titles/";
+ if (!clip->getProperty("xmltemplate").isEmpty()) {
+ // template text clip
+
+ // Get the list of existing templates
+ QStringList filter;
+ filter << "*.kdenlivetitle";
+ QStringList templateFiles = QDir(titlepath).entryList(filter, QDir::Files);
+
+ QDialog *dia = new QDialog(this);
+ Ui::TemplateClip_UI dia_ui;
+ dia_ui.setupUi(dia);
+ int ix = -1;
+ const QString templatePath = clip->getProperty("xmltemplate");
+ for (int i = 0; i < templateFiles.size(); ++i) {
+ dia_ui.template_list->comboBox()->addItem(templateFiles.at(i), titlepath + templateFiles.at(i));
+ if (templatePath == KUrl(titlepath + templateFiles.at(i)).path()) ix = i;
+ }
+ if (ix != -1) dia_ui.template_list->comboBox()->setCurrentIndex(ix);
+ else dia_ui.template_list->comboBox()->insertItem(0, templatePath);
+ dia_ui.template_list->fileDialog()->setFilter("*.kdenlivetitle");
+ //warning: setting base directory doesn't work??
+ KUrl startDir(titlepath);
+ dia_ui.template_list->fileDialog()->setUrl(startDir);
+ dia_ui.description->setText(clip->getProperty("description"));
+ dia_ui.clone_clip->setChecked(true);
+ if (dia->exec() == QDialog::Accepted) {
+ QString textTemplate = dia_ui.template_list->comboBox()->itemData(dia_ui.template_list->comboBox()->currentIndex()).toString();
+ if (textTemplate.isEmpty()) textTemplate = dia_ui.template_list->comboBox()->currentText();
+
+ QMap <QString, QString> newprops;
+
+ if (KUrl(textTemplate).path() != templatePath) {
+ // The template was changed
+ newprops.insert("xmltemplate", textTemplate);
+ }
+
+ if (dia_ui.description->toPlainText() != clip->getProperty("description")) {
+ newprops.insert("description", dia_ui.description->toPlainText());
+ }
+
+ QString newtemplate = newprops.value("xmltemplate");
+ if (newtemplate.isEmpty()) newtemplate = templatePath;
+
+ // template modified we need to update xmldata
+ QString description = newprops.value("description");
+ if (description.isEmpty()) description = clip->getProperty("description");
+ newprops.insert("xmldata", m_projectList->generateTemplateXml(newtemplate, description).toString());
+ if (dia_ui.normal_clip->isChecked()) {
+ // Switch clip to normal clip
+ newprops.insert("xmltemplate", QString());
+ }
+ EditClipCommand *command = new EditClipCommand(m_projectList, clip->getId(), clip->properties(), newprops, true);
+ m_activeDocument->commandStack()->push(command);
+ }
+ return;
+ }
QString path = clip->getProperty("resource");
- TitleWidget *dia_ui = new TitleWidget(KUrl(), titlepath, m_projectMonitor->render, this);
+ TitleWidget *dia_ui = new TitleWidget(KUrl(), m_activeDocument->timecode(), titlepath, m_projectMonitor->render, this);
QDomDocument doc;
doc.setContent(clip->getProperty("xmldata"));
dia_ui->setXml(doc);
if (dia_ui->exec() == QDialog::Accepted) {
- QImage pix = dia_ui->renderedPixmap();
- pix.save(path);
- //slotAddClipFile(KUrl("/tmp/kdenlivetitle.png"), QString(), -1);
- //m_clipManager->slotEditTextClipFile(id, dia_ui->xml().toString());
+ QRect rect = dia_ui->renderedRect();
QMap <QString, QString> newprops;
newprops.insert("xmldata", dia_ui->xml().toString());
- newprops.insert("frame_size", QString::number(pix.width()) + 'x' + QString::number(pix.height()));
+ newprops.insert("out", QString::number(dia_ui->duration()));
+ newprops.insert("frame_size", QString::number(rect.width()) + 'x' + QString::number(rect.height()));
EditClipCommand *command = new EditClipCommand(m_projectList, clip->getId(), clip->properties(), newprops, true);
m_activeDocument->commandStack()->push(command);
- m_clipMonitor->refreshMonitor(true);
+ m_activeTimeline->projectView()->slotUpdateClip(clip->getId());
m_activeDocument->setModified(true);
}
delete dia_ui;
ClipProperties dia(clip, m_activeDocument->timecode(), m_activeDocument->fps(), this);
connect(&dia, SIGNAL(addMarker(const QString &, GenTime, QString)), m_activeTimeline->projectView(), SLOT(slotAddClipMarker(const QString &, GenTime, QString)));
if (dia.exec() == QDialog::Accepted) {
- EditClipCommand *command = new EditClipCommand(m_projectList, dia.clipId(), clip->properties(), dia.properties(), true);
+ EditClipCommand *command = new EditClipCommand(m_projectList, clip->getId(), clip->properties(), dia.properties(), true);
m_activeDocument->commandStack()->push(command);
//m_projectList->slotUpdateClipProperties(dia.clipId(), dia.properties());
if (dia.needsTimelineRefresh()) {
// update clip occurences in timeline
- m_activeTimeline->projectView()->slotUpdateClip(dia.clipId());
+ m_activeTimeline->projectView()->slotUpdateClip(clip->getId());
}
}
}
void MainWindow::customEvent(QEvent* e)
{
if (e->type() == QEvent::User) {
- // The timeline playing position changed...
- kDebug() << "RECEIVED JOG EVEMNT!!!";
+ m_messageLabel->setMessage(static_cast <MltErrorEvent *>(e)->message(), MltError);
}
}
void MainWindow::slotActivateEffectStackView()
}
}
+
void MainWindow::slotSaveZone(Render *render, QPoint zone)
{
KDialog *dialog = new KDialog(this);
}
qDeleteAll(entries);
initEffects::refreshLumas();
+ m_activeTimeline->projectView()->reloadTransitionLumas();
}
void MainWindow::slotGetNewRenderStuff()
slotTranscode(urls);
}
+void MainWindow::slotSetDocumentRenderProfile(const QString &dest, const QString &name, const QString &file)
+{
+ if (m_activeDocument == NULL) return;
+ m_activeDocument->setDocumentProperty("renderdestination", dest);
+ m_activeDocument->setDocumentProperty("renderprofile", name);
+ m_activeDocument->setDocumentProperty("renderurl", file);
+ m_activeDocument->setModified(true);
+}
+
+
+void MainWindow::slotPrepareRendering(bool scriptExport, bool zoneOnly, const QString &chapterFile)
+{
+ if (m_activeDocument == NULL || m_renderWidget == NULL) return;
+ QString scriptPath;
+ QString playlistPath;
+ if (scriptExport) {
+ bool ok;
+ QString scriptsFolder = m_activeDocument->projectFolder().path() + "/scripts/";
+ QString path = m_renderWidget->getFreeScriptName();
+ scriptPath = QInputDialog::getText(this, i18n("Create Render Script"), i18n("Script name (will be saved in: %1)", scriptsFolder), QLineEdit::Normal, KUrl(path).fileName(), &ok);
+ if (!ok || scriptPath.isEmpty()) return;
+ scriptPath.prepend(scriptsFolder);
+ QFile f(scriptPath);
+ if (f.exists()) {
+ if (KMessageBox::warningYesNo(this, i18n("Script file already exists. Do you want to overwrite it?")) != KMessageBox::Yes)
+ return;
+ }
+ playlistPath = scriptPath + ".mlt";
+ m_projectMonitor->saveSceneList(playlistPath);
+ } else {
+ KTemporaryFile temp;
+ temp.setAutoRemove(false);
+ temp.setSuffix(".mlt");
+ temp.open();
+ playlistPath = temp.fileName();
+ m_projectMonitor->saveSceneList(playlistPath);
+ }
+
+ if (!chapterFile.isEmpty()) {
+ int in = 0;
+ int out;
+ if (!zoneOnly) out = (int) GenTime(m_activeDocument->projectDuration()).frames(m_activeDocument->fps());
+ else {
+ in = m_activeTimeline->inPoint();
+ out = m_activeTimeline->outPoint();
+ }
+ QDomDocument doc;
+ QDomElement chapters = doc.createElement("chapters");
+ chapters.setAttribute("fps", m_activeDocument->fps());
+ doc.appendChild(chapters);
+
+ QDomElement guidesxml = m_activeDocument->guidesXml();
+ QDomNodeList nodes = guidesxml.elementsByTagName("guide");
+ for (int i = 0; i < nodes.count(); i++) {
+ QDomElement e = nodes.item(i).toElement();
+ if (!e.isNull()) {
+ QString comment = e.attribute("comment");
+ int time = (int) GenTime(e.attribute("time").toDouble()).frames(m_activeDocument->fps());
+ if (time >= in && time < out) {
+ if (zoneOnly) time = time - in;
+ QDomElement chapter = doc.createElement("chapter");
+ chapters.appendChild(chapter);
+ chapter.setAttribute("title", comment);
+ chapter.setAttribute("time", time);
+ }
+ }
+ }
+ if (chapters.childNodes().count() > 0) {
+ if (m_activeTimeline->projectView()->hasGuide(out, 0) == -1) {
+ // Always insert a guide in pos 0
+ QDomElement chapter = doc.createElement("chapter");
+ chapters.insertBefore(chapter, QDomNode());
+ chapter.setAttribute("title", i18n("Start"));
+ chapter.setAttribute("time", "0");
+ }
+ // save chapters file
+ QFile file(chapterFile);
+ if (!file.open(QIODevice::WriteOnly | QIODevice::Text)) {
+ kWarning() << "////// ERROR writing DVD CHAPTER file: " << chapterFile;
+ } else {
+ file.write(doc.toString().toUtf8());
+ if (file.error() != QFile::NoError) {
+ kWarning() << "////// ERROR writing DVD CHAPTER file: " << chapterFile;
+ }
+ file.close();
+ }
+ }
+ }
+
+ m_renderWidget->slotExport(scriptExport, m_activeTimeline->inPoint(), m_activeTimeline->outPoint(), playlistPath, scriptPath);
+}
+
+void MainWindow::slotUpdateTimecodeFormat(int ix)
+{
+ KdenliveSettings::setFrametimecode(ix == 1);
+ m_clipMonitor->updateTimecodeFormat();
+ m_projectMonitor->updateTimecodeFormat();
+}
+
+void MainWindow::slotRemoveFocus()
+{
+ statusBar()->setFocus();
+ statusBar()->clearFocus();
+}
+
+
+
+
#include "mainwindow.moc"
projects / kdenlive / blobdiff