#include "renderwidget.h"
#include "renderer.h"
#include "audiosignal.h"
-#ifndef NO_JOGSHUTTLE
+#ifdef USE_JOGSHUTTLE
#include "jogshuttle.h"
#include "jogaction.h"
#include "jogshuttleconfig.h"
-#endif /* NO_JOGSHUTTLE */
+#endif
#include "clipproperties.h"
#include "wizard.h"
-#include "editclipcommand.h"
+#include "commands/editclipcommand.h"
#include "titlewidget.h"
#include "markerdialog.h"
#include "clipitem.h"
#include "interfaces.h"
-#include "kdenlive-config.h"
+#include "config-kdenlive.h"
#include "cliptranscode.h"
+#include "clipstabilize.h"
#include "ui_templateclip_ui.h"
#include "colorscopes/vectorscope.h"
#include "colorscopes/waveform.h"
#include "colorscopes/rgbparade.h"
#include "colorscopes/histogram.h"
-#include "audiospectrum.h"
-#include "spectrogram.h"
+#include "audioscopes/audiospectrum.h"
+#include "audioscopes/spectrogram.h"
#include "archivewidget.h"
#include "databackup/backupwidget.h"
+#include "utils/freesound.h"
+
#include <KApplication>
#include <KAction>
#include <knewstuff2/engine.h>
#include <knewstuff2/ui/knewstuffaction.h>
#define KNS3 KNS
-#endif /* KDE_IS_VERSION(4,3,80) */
+#endif
#include <KToolBar>
#include <KColorScheme>
#include <KProgressDialog>
#include <QBitmap>
#include <stdlib.h>
+#include <locale.h>
// Uncomment for deeper debugging
//#define DEBUG_MAINW
m_activeTimeline(NULL),
m_recMonitor(NULL),
m_renderWidget(NULL),
-#ifndef NO_JOGSHUTTLE
+#ifdef USE_JOGSHUTTLE
m_jogProcess(NULL),
m_jogShuttle(NULL),
-#endif /* NO_JOGSHUTTLE */
+#endif
m_findActivated(false),
m_stopmotion(NULL)
{
// Init locale
QLocale systemLocale = QLocale();
+ setlocale(LC_NUMERIC, NULL);
+ char *separator = localeconv()->decimal_point;
+ if (separator != systemLocale.decimalPoint()) {
+ kDebug()<<"------\n!!! system locale is not similar to Qt's locale... be prepared for bugs!!!\n------";
+ // HACK: There is a locale conflict, so set locale to at least have correct decimal point
+ if (strncmp(separator, ".", 1) == 0) systemLocale = QLocale::c();
+ else if (strncmp(separator, ",", 1) == 0) systemLocale = QLocale("fr_FR.UTF-8");
+ }
+
systemLocale.setNumberOptions(QLocale::OmitGroupSeparator);
QLocale::setDefault(systemLocale);
closeTabButton->adjustSize();
closeTabButton->setToolTip(i18n("Close the current tab"));
m_timelineArea->setCornerWidget(closeTabButton);
- connect(m_timelineArea, SIGNAL(currentChanged(int)), this, SLOT(activateDocument()));
+ //connect(m_timelineArea, SIGNAL(currentChanged(int)), this, SLOT(activateDocument()));
connect(&m_findTimer, SIGNAL(timeout()), this, SLOT(findTimeout()));
m_findTimer.setSingleShot(true);
m_clipMonitorDock->setObjectName("clip_monitor");
m_clipMonitor = new Monitor("clip", m_monitorManager, QString(), m_timelineArea);
m_clipMonitorDock->setWidget(m_clipMonitor);
- connect(m_projectList, SIGNAL(clipSelected(DocClipBase *, QPoint)), m_clipMonitor, SLOT(slotSetClipProducer(DocClipBase *, QPoint)));
- connect(m_projectList, SIGNAL(raiseClipMonitor()), m_clipMonitor, SLOT(activateMonitor()));
+ // Connect the project list
+ connect(m_projectList, SIGNAL(clipSelected(DocClipBase *, QPoint, bool)), m_clipMonitor, SLOT(slotSetClipProducer(DocClipBase *, QPoint, bool)));
+ connect(m_projectList, SIGNAL(raiseClipMonitor()), m_clipMonitor, SLOT(activateMonitor()));
+ connect(m_projectList, SIGNAL(loadingIsOver()), this, SLOT(slotElapsedTime()));
+ connect(m_projectList, SIGNAL(displayMessage(const QString&, int)), this, SLOT(slotGotProgressInfo(const QString&, int)));
+ connect(m_projectList, SIGNAL(updateRenderStatus()), this, SLOT(slotCheckRenderStatus()));
+ connect(m_projectList, SIGNAL(clipNeedsReload(const QString&)),this, SLOT(slotUpdateClip(const QString &)));
+ connect(m_projectList, SIGNAL(updateProfile(const QString &)), this, SLOT(slotUpdateProjectProfile(const QString &)));
+ connect(m_projectList, SIGNAL(refreshClip(const QString &, bool)), m_monitorManager, SLOT(slotRefreshCurrentMonitor(const QString &)));
+ connect(m_projectList, SIGNAL(findInTimeline(const QString&)), this, SLOT(slotClipInTimeline(const QString&)));
+ connect(m_clipMonitor, SIGNAL(zoneUpdated(QPoint)), m_projectList, SLOT(slotUpdateClipCut(QPoint)));
+ connect(m_clipMonitor, SIGNAL(extractZone(const QString &, QPoint)), m_projectList, SLOT(slotCutClipJob(const QString &, QPoint)));
+
m_projectMonitorDock = new QDockWidget(i18n("Project Monitor"), this);
m_projectMonitorDock->setObjectName("project_monitor");
m_projectMonitor = new Monitor("project", m_monitorManager, QString());
connect(m_recMonitor, SIGNAL(addProjectClip(KUrl)), this, SLOT(slotAddProjectClip(KUrl)));
connect(m_recMonitor, SIGNAL(addProjectClipList(KUrl::List)), this, SLOT(slotAddProjectClipList(KUrl::List)));
connect(m_recMonitor, SIGNAL(showConfigDialog(int, int)), this, SLOT(slotPreferences(int, int)));
-#endif
+
+#endif /* ! Q_WS_MAC */
m_monitorManager->initMonitors(m_clipMonitor, m_projectMonitor, m_recMonitor);
m_notesDock = new QDockWidget(i18n("Project Notes"), this);
m_effectStack = new EffectStackView(m_projectMonitor);
m_effectStackDock->setWidget(m_effectStack);
addDockWidget(Qt::TopDockWidgetArea, m_effectStackDock);
+ connect(m_effectStack, SIGNAL(startFilterJob(ItemInfo, const QString&,const QString&,const QString&,const QString&,const QString&,const QString&,const QString&)), m_projectList, SLOT(slotStartFilterJob(ItemInfo, const QString&,const QString&,const QString&,const QString&,const QString&,const QString&,const QString&)));
m_transitionConfigDock = new QDockWidget(i18n("Transition"), this);
m_transitionConfigDock->setObjectName("transition");
loadPlugins();
loadTranscoders();
+ loadStabilize();
m_projectMonitor->setupMenu(static_cast<QMenu*>(factory()->container("monitor_go", this)), m_playZone, m_loopZone, NULL, m_loopClip);
m_clipMonitor->setupMenu(static_cast<QMenu*>(factory()->container("monitor_go", this)), m_playZone, m_loopZone, static_cast<QMenu*>(factory()->container("marker_menu", this)));
QMenu *clipInTimeline = static_cast<QMenu*>(factory()->container("clip_in_timeline", this));
clipInTimeline->setIcon(KIcon("go-jump"));
- m_projectList->setupGeneratorMenu(static_cast<QMenu*>(factory()->container("generators", this)),
- static_cast<QMenu*>(factory()->container("transcoders", this)),
- clipInTimeline);
+ QHash<QString,QMenu*> menus;
+ menus.insert("addMenu",static_cast<QMenu*>(factory()->container("generators", this)));
+ menus.insert("extractAudioMenu",static_cast<QMenu*>(factory()->container("extract_audio", this)));
+ menus.insert("transcodeMenu",static_cast<QMenu*>(factory()->container("transcoders", this)));
+ menus.insert("stabilizeMenu",static_cast<QMenu*>(factory()->container("stabilize", this)));
+ menus.insert("inTimelineMenu",clipInTimeline);
+ m_projectList->setupGeneratorMenu(menus);
// build themes menus
QMenu *themesMenu = static_cast<QMenu*>(factory()->container("themes_menu", this));
connect(m_projectMonitorDock, SIGNAL(visibilityChanged(bool)), m_projectMonitor, SLOT(refreshMonitor(bool)));
connect(m_clipMonitorDock, SIGNAL(visibilityChanged(bool)), m_clipMonitor, SLOT(refreshMonitor(bool)));
- //connect(m_monitorManager, SIGNAL(connectMonitors()), this, SLOT(slotConnectMonitors()));
connect(m_monitorManager, SIGNAL(checkColorScopes()), this, SLOT(slotUpdateColorScopes()));
connect(m_monitorManager, SIGNAL(clearScopes()), this, SLOT(slotClearColorScopes()));
connect(m_effectList, SIGNAL(addEffect(const QDomElement)), this, SLOT(slotAddEffect(const QDomElement)));
m_projectList->slotAddClip(urls);
}
-#ifndef NO_JOGSHUTTLE
+#ifdef USE_JOGSHUTTLE
activateShuttleDevice();
-#endif /* NO_JOGSHUTTLE */
+#endif
m_projectListDock->raise();
actionCollection()->addAssociatedWidget(m_clipMonitor->container());
actionCollection()->addAssociatedWidget(m_projectMonitor->container());
+
+ // Populate encoding profiles
+ KConfig conf("encodingprofiles.rc", KConfig::FullConfig, "appdata");
+ if (KdenliveSettings::proxyparams().isEmpty() || KdenliveSettings::proxyextension().isEmpty()) {
+ KConfigGroup group(&conf, "proxy");
+ QMap< QString, QString > values = group.entryMap();
+ QMapIterator<QString, QString> i(values);
+ if (i.hasNext()) {
+ i.next();
+ QString data = i.value();
+ KdenliveSettings::setProxyparams(data.section(';', 0, 0));
+ KdenliveSettings::setProxyextension(data.section(';', 1, 1));
+ }
+ }
+ if (KdenliveSettings::v4l_parameters().isEmpty() || KdenliveSettings::v4l_extension().isEmpty()) {
+ KConfigGroup group(&conf, "video4linux");
+ QMap< QString, QString > values = group.entryMap();
+ QMapIterator<QString, QString> i(values);
+ if (i.hasNext()) {
+ i.next();
+ QString data = i.value();
+ KdenliveSettings::setV4l_parameters(data.section(';', 0, 0));
+ KdenliveSettings::setV4l_extension(data.section(';', 1, 1));
+ }
+ }
+ if (KdenliveSettings::decklink_parameters().isEmpty() || KdenliveSettings::decklink_extension().isEmpty()) {
+ KConfigGroup group(&conf, "decklink");
+ QMap< QString, QString > values = group.entryMap();
+ QMapIterator<QString, QString> i(values);
+ if (i.hasNext()) {
+ i.next();
+ QString data = i.value();
+ KdenliveSettings::setDecklink_parameters(data.section(';', 0, 0));
+ KdenliveSettings::setDecklink_extension(data.section(';', 1, 1));
+ }
+ }
}
MainWindow::~MainWindow()
m_effectList->reloadEffectList(m_effectsMenu, m_effectActions);
}
-#ifndef NO_JOGSHUTTLE
+#ifdef USE_JOGSHUTTLE
void MainWindow::activateShuttleDevice()
{
delete m_jogShuttle;
connect(m_jogShuttle, SIGNAL(forward(double)), m_monitorManager, SLOT(slotForward(double)));
connect(m_jogShuttle, SIGNAL(action(const QString&)), this, SLOT(slotDoAction(const QString&)));
}
-#endif /* NO_JOGSHUTTLE */
+#endif /* USE_JOGSHUTTLE */
void MainWindow::slotDoAction(const QString& action_name)
{
void MainWindow::slotUpdateClip(const QString &id)
{
if (!m_activeDocument) return;
- kDebug()<<"//\n\n RECIEVED UPDATED PRODUCER FOR: "<<id<<"\n\n--------------------";
DocClipBase *clip = m_activeDocument->clipManager()->getClipById(id);
+ if (!clip) return;
if (clip->numReferences() > 0) m_activeTimeline->projectView()->slotUpdateClip(id);
if (m_clipMonitor->activeClip() && m_clipMonitor->activeClip()->getId() == id) {
Mlt::Producer *monitorProducer = clip->getCloneProducer();
- if (clip) m_clipMonitor->updateClipProducer(monitorProducer);
- }
- if (clip) {
- clip->cleanupProducers();
+ m_clipMonitor->updateClipProducer(monitorProducer);
}
+ clip->cleanupProducers();
}
void MainWindow::slotConnectMonitors()
QAction *addFolderButton = new KAction(KIcon("folder-new"), i18n("Create Folder"), this);
collection.addAction("add_folder", addFolderButton);
connect(addFolderButton , SIGNAL(triggered()), m_projectList, SLOT(slotAddFolder()));
+
+ QAction *downloadAudio = new KAction(KIcon("download"), i18n("Download Audio"), this);
+ collection.addAction("download_audio", downloadAudio);
+ connect(downloadAudio , SIGNAL(triggered()), this, SLOT(slotDownloadAudio()));
QAction *clipProperties = new KAction(KIcon("document-edit"), i18n("Clip Properties"), this);
collection.addAction("clip_properties", clipProperties);
QMap <QString, QString> documentProperties;
QPoint projectTracks(KdenliveSettings::videotracks(), KdenliveSettings::audiotracks());
if (!showProjectSettings) {
- // set up default properties
- documentProperties.insert("enableproxy", QString::number((int) KdenliveSettings::enableproxy()));
- documentProperties.insert("generateproxy", QString::number((int) KdenliveSettings::generateproxy()));
- documentProperties.insert("proxyminsize", QString::number(KdenliveSettings::proxyminsize()));
- documentProperties.insert("proxyparams", KdenliveSettings::proxyparams());
- documentProperties.insert("proxyextension", KdenliveSettings::proxyextension());
- documentProperties.insert("generateimageproxy", QString::number((int) KdenliveSettings::generateimageproxy()));
- documentProperties.insert("proxyimageminsize", QString::number(KdenliveSettings::proxyimageminsize()));
if (!KdenliveSettings::activatetabs())
if (!closeCurrentDocument())
return;
}
}
m_clipMonitor->slotSetClipProducer(NULL);
+ m_projectList->slotResetProjectList();
m_timelineArea->removeTab(m_timelineArea->indexOf(w));
if (m_timelineArea->count() == 1) {
m_timelineArea->setTabBarHidden(true);
bool ok;
TrackView *trackView = new TrackView(doc, &ok, this);
-
+ connectDocument(trackView, doc);
progressDialog.progressBar()->setValue(3);
qApp->processEvents();
slotGotProgressInfo(QString(), -1);
m_projectMonitor->adjustRulerSize(trackView->duration());
m_projectMonitor->slotZoneMoved(trackView->inPoint(), trackView->outPoint());
- m_clipMonitor->refreshMonitor(true);
-
progressDialog.progressBar()->setValue(4);
if (openBackup) slotOpenBackupDialog(url);
}
if (w->exec() == QDialog::Accepted) {
QString profile = w->selectedProfile();
m_activeDocument->setProjectFolder(w->selectedFolder());
-#ifndef Q_WS_MAC
+#ifndef Q_WS_MAC
m_recMonitor->slotUpdateCaptureFolder(m_activeDocument->projectFolder().path(KUrl::AddTrailingSlash));
#endif
if (m_renderWidget) m_renderWidget->setDocumentPath(m_activeDocument->projectFolder().path(KUrl::AddTrailingSlash));
{
if (!m_renderWidget) {
QString projectfolder = m_activeDocument ? m_activeDocument->projectFolder().path(KUrl::AddTrailingSlash) : KdenliveSettings::defaultprojectfolder();
- m_renderWidget = new RenderWidget(projectfolder, m_projectList->useProxy(), this);
+ MltVideoProfile profile;
+ if (m_activeDocument) profile = m_activeDocument->mltProfile();
+ m_renderWidget = new RenderWidget(projectfolder, m_projectList->useProxy(), profile, this);
connect(m_renderWidget, SIGNAL(shutdown()), this, SLOT(slotShutdown()));
connect(m_renderWidget, SIGNAL(selectedRenderProfile(QMap <QString, QString>)), this, SLOT(slotSetDocumentRenderProfile(QMap <QString, QString>)));
connect(m_renderWidget, SIGNAL(prepareRenderingData(bool, bool, const QString&)), this, SLOT(slotPrepareRendering(bool, bool, const QString&)));
disconnect(m_notesWidget, SIGNAL(textChanged()), m_activeDocument, SLOT(setModified()));
disconnect(m_clipMonitor, SIGNAL(zoneUpdated(QPoint)), m_activeDocument, SLOT(setModified()));
disconnect(m_projectList, SIGNAL(projectModified()), m_activeDocument, SLOT(setModified()));
- disconnect(m_projectList, SIGNAL(updateProfile(const QString &)), this, SLOT(slotUpdateProjectProfile(const QString &)));
disconnect(m_projectMonitor->render, SIGNAL(refreshDocumentProducers(bool, bool)), m_activeDocument, SLOT(checkProjectClips(bool, bool)));
disconnect(m_activeTimeline->projectView(), SIGNAL(transitionItemSelected(Transition*, int, QPoint, bool)), m_projectMonitor, SLOT(slotSetSelectedClip(Transition*)));
disconnect(m_activeTimeline->projectView(), SIGNAL(playMonitor()), m_projectMonitor, SLOT(slotPlay()));
disconnect(m_activeTimeline->projectView(), SIGNAL(displayMessage(const QString&, MessageType)), m_messageLabel, SLOT(setMessage(const QString&, MessageType)));
- disconnect(m_activeTimeline->projectView(), SIGNAL(showClipFrame(DocClipBase *, QPoint, const int)), m_clipMonitor, SLOT(slotSetClipProducer(DocClipBase *, QPoint, const int)));
+ disconnect(m_activeTimeline->projectView(), SIGNAL(showClipFrame(DocClipBase *, QPoint, bool, const int)), m_clipMonitor, SLOT(slotSetClipProducer(DocClipBase *, QPoint, bool, const int)));
+ disconnect(m_projectList, SIGNAL(gotFilterJobResults(const QString &, int, int, const QString &, stringMap)), m_activeTimeline->projectView(), SLOT(slotGotFilterJobResults(const QString &, int, int, const QString &, stringMap)));
+
disconnect(m_activeTimeline, SIGNAL(cursorMoved()), m_projectMonitor, SLOT(activateMonitor()));
disconnect(m_activeTimeline, SIGNAL(insertTrack(int)), this, SLOT(slotInsertTrack(int)));
disconnect(m_activeTimeline, SIGNAL(deleteTrack(int)), this, SLOT(slotDeleteTrack(int)));
disconnect(m_activeTimeline->projectView(), SIGNAL(activateDocumentMonitor()), m_projectMonitor, SLOT(activateMonitor()));
disconnect(m_activeTimeline, SIGNAL(zoneMoved(int, int)), this, SLOT(slotZoneMoved(int, int)));
disconnect(m_projectList, SIGNAL(loadingIsOver()), m_activeTimeline->projectView(), SLOT(slotUpdateAllThumbs()));
- disconnect(m_projectList, SIGNAL(displayMessage(const QString&, int)), this, SLOT(slotGotProgressInfo(const QString&, int)));
- disconnect(m_projectList, SIGNAL(updateRenderStatus()), this, SLOT(slotCheckRenderStatus()));
- disconnect(m_projectList, SIGNAL(clipNeedsReload(const QString&)), this, SLOT(slotUpdateClip(const QString &)));
disconnect(m_projectList, SIGNAL(refreshClip(const QString &)), m_activeTimeline->projectView(), SLOT(slotRefreshThumbs(const QString &)));
m_effectStack->clear();
}
//m_activeDocument->setRenderer(NULL);
- disconnect(m_projectList, SIGNAL(refreshClip(const QString &, bool)), m_monitorManager, SLOT(slotRefreshCurrentMonitor()));
m_clipMonitor->stop();
}
KdenliveSettings::setCurrent_profile(doc->profilePath());
KdenliveSettings::setProject_fps(doc->fps());
m_monitorManager->resetProfiles(doc->timecode());
+ m_clipMonitorDock->raise();
m_projectList->setDocument(doc);
m_transitionConfig->updateProjectFormat(doc->mltProfile(), doc->timecode(), doc->tracksList());
m_effectStack->updateProjectFormat(doc->mltProfile(), doc->timecode());
- connect(m_projectList, SIGNAL(refreshClip(const QString &, bool)), m_monitorManager, SLOT(slotRefreshCurrentMonitor()));
connect(m_projectList, SIGNAL(refreshClip(const QString &, bool)), trackView->projectView(), SLOT(slotRefreshThumbs(const QString &, bool)));
- connect(m_projectList, SIGNAL(clipNeedsReload(const QString&)),this, SLOT(slotUpdateClip(const QString &)));
connect(m_projectList, SIGNAL(projectModified()), doc, SLOT(setModified()));
- connect(m_projectList, SIGNAL(updateProfile(const QString &)), this, SLOT(slotUpdateProjectProfile(const QString &)));
connect(m_projectList, SIGNAL(clipNameChanged(const QString, const QString)), trackView->projectView(), SLOT(clipNameChanged(const QString, const QString)));
- connect(m_projectList, SIGNAL(findInTimeline(const QString&)), this, SLOT(slotClipInTimeline(const QString&)));
-
-
//connect(trackView, SIGNAL(cursorMoved()), m_projectMonitor, SLOT(activateMonitor()));
connect(trackView, SIGNAL(insertTrack(int)), this, SLOT(slotInsertTrack(int)));
connect(trackView, SIGNAL(deleteTrack(int)), this, SLOT(slotDeleteTrack(int)));
connect(trackView->projectView(), SIGNAL(forceClipProcessing(const QString &)), m_projectList, SLOT(slotForceProcessing(const QString &)));
connect(m_projectMonitor, SIGNAL(renderPosition(int)), trackView, SLOT(moveCursorPos(int)));
connect(m_projectMonitor, SIGNAL(zoneUpdated(QPoint)), trackView, SLOT(slotSetZone(QPoint)));
- connect(m_clipMonitor, SIGNAL(zoneUpdated(QPoint)), m_projectList, SLOT(slotUpdateClipCut(QPoint)));
connect(m_projectMonitor, SIGNAL(zoneUpdated(QPoint)), doc, SLOT(setModified()));
connect(m_clipMonitor, SIGNAL(zoneUpdated(QPoint)), doc, SLOT(setModified()));
connect(m_projectMonitor, SIGNAL(durationChanged(int)), trackView, SLOT(setDuration(int)));
connect(trackView, SIGNAL(setZoom(int)), this, SLOT(slotSetZoom(int)));
connect(trackView->projectView(), SIGNAL(displayMessage(const QString&, MessageType)), m_messageLabel, SLOT(setMessage(const QString&, MessageType)));
- connect(trackView->projectView(), SIGNAL(showClipFrame(DocClipBase *, QPoint, const int)), m_clipMonitor, SLOT(slotSetClipProducer(DocClipBase *, QPoint, const int)));
+ connect(trackView->projectView(), SIGNAL(showClipFrame(DocClipBase *, QPoint, bool, const int)), m_clipMonitor, SLOT(slotSetClipProducer(DocClipBase *, QPoint, bool, const int)));
connect(trackView->projectView(), SIGNAL(playMonitor()), m_projectMonitor, SLOT(slotPlay()));
connect(trackView->projectView(), SIGNAL(clipItemSelected(ClipItem*, int, bool)), m_projectMonitor, SLOT(slotSetSelectedClip(ClipItem*)));
connect(trackView->projectView(), SIGNAL(transitionItemSelected(Transition*, int, QPoint, bool)), m_projectMonitor, SLOT(slotSetSelectedClip(Transition*)));
+
+ connect(m_projectList, SIGNAL(gotFilterJobResults(const QString &, int, int, const QString &, stringMap)), trackView->projectView(), SLOT(slotGotFilterJobResults(const QString &, int, int, const QString &, stringMap)));
connect(m_effectStack, SIGNAL(updateEffect(ClipItem*, int, QDomElement, QDomElement, int)), trackView->projectView(), SLOT(slotUpdateClipEffect(ClipItem*, int, QDomElement, QDomElement, int)));
connect(m_effectStack, SIGNAL(updateClipRegion(ClipItem*, int, QString)), trackView->projectView(), SLOT(slotUpdateClipRegion(ClipItem*, int, QString)));
connect(trackView->projectView(), SIGNAL(activateDocumentMonitor()), m_projectMonitor, SLOT(activateMonitor()));
connect(trackView, SIGNAL(zoneMoved(int, int)), this, SLOT(slotZoneMoved(int, int)));
connect(m_projectList, SIGNAL(loadingIsOver()), trackView->projectView(), SLOT(slotUpdateAllThumbs()));
- connect(m_projectList, SIGNAL(loadingIsOver()), this, SLOT(slotElapsedTime()));
- connect(m_projectList, SIGNAL(displayMessage(const QString&, int)), this, SLOT(slotGotProgressInfo(const QString&, int)));
- connect(m_projectList, SIGNAL(updateRenderStatus()), this, SLOT(slotCheckRenderStatus()));
trackView->projectView()->setContextMenu(m_timelineContextMenu, m_timelineContextClipMenu, m_timelineContextTransitionMenu, m_clipTypeGroup, (QMenu*)(factory()->container("marker_menu", this)));
m_activeDocument = doc;
m_activeTimeline->updateProjectFps();
m_activeDocument->checkProjectClips();
-#ifndef Q_WS_MAC
+#ifndef Q_WS_MAC
m_recMonitor->slotUpdateCaptureFolder(m_activeDocument->projectFolder().path(KUrl::AddTrailingSlash));
#endif
//Update the mouse position display so it will display in DF/NDF format by default based on the project setting.
slotUpdateMousePosition(0);
+ m_monitorManager->activateMonitor("clip");
// set tool to select tool
m_buttonSelectTool->setChecked(true);
}
void MainWindow::slotUpdateCaptureFolder()
{
-#ifndef Q_WS_MAC
+#ifndef Q_WS_MAC
if (m_activeDocument) m_recMonitor->slotUpdateCaptureFolder(m_activeDocument->projectFolder().path(KUrl::AddTrailingSlash));
else m_recMonitor->slotUpdateCaptureFolder(KdenliveSettings::defaultprojectfolder());
#endif
// Update list of transcoding profiles
loadTranscoders();
-#ifndef NO_JOGSHUTTLE
+ loadStabilize();
+#ifdef USE_JOGSHUTTLE
activateShuttleDevice();
-#endif /* NO_JOGSHUTTLE */
+#endif
}
m_activeTimeline->projectView()->editItemDuration();
}
-void MainWindow::slotAddProjectClip(KUrl url)
+void MainWindow::slotAddProjectClip(KUrl url, const QString &comment)
{
if (m_activeDocument)
- m_activeDocument->slotAddClipFile(url, QString());
+ m_activeDocument->slotAddClipFile(url, QString(), QString(), comment);
}
void MainWindow::slotAddProjectClipList(KUrl::List urls)
else newprops.insert("templatetext", description);
//newprops.insert("xmldata", m_projectList->generateTemplateXml(newtemplate, description).toString());
if (!newprops.isEmpty()) {
- EditClipCommand *command = new EditClipCommand(m_projectList, clip->getId(), clip->properties(), newprops, true);
+ EditClipCommand *command = new EditClipCommand(m_projectList, clip->getId(), clip->currentProperties(newprops), newprops, true);
m_activeDocument->commandStack()->push(command);
}
}
if (dia_ui->exec() == QDialog::Accepted) {
QMap <QString, QString> newprops;
newprops.insert("xmldata", dia_ui->xml().toString());
- if (dia_ui->outPoint() != clip->duration().frames(m_activeDocument->fps()) - 1) {
+ if (dia_ui->outPoint() != clip->duration().frames(m_activeDocument->fps())) {
// duration changed, we need to update duration
newprops.insert("out", QString::number(dia_ui->outPoint()));
int currentLength = QString(clip->producerProperty("length")).toInt();
dia_ui->saveTitle(path);
} else newprops.insert("resource", QString());
}
- EditClipCommand *command = new EditClipCommand(m_projectList, clip->getId(), clip->properties(), newprops, true);
+ EditClipCommand *command = new EditClipCommand(m_projectList, clip->getId(), clip->currentProperties(newprops), newprops, true);
m_activeDocument->commandStack()->push(command);
//m_activeTimeline->projectView()->slotUpdateClip(clip->getId());
m_activeDocument->setModified(true);
for (int i = 0; i < cliplist.count(); i++) {
DocClipBase *clip = cliplist.at(i);
if (clip->clipType() == IMAGE)
- new EditClipCommand(m_projectList, clip->getId(), clip->properties(), newImageProps, true, command);
+ new EditClipCommand(m_projectList, clip->getId(), clip->currentProperties(newImageProps), newImageProps, true, command);
else
- new EditClipCommand(m_projectList, clip->getId(), clip->properties(), newProps, true, command);
+ new EditClipCommand(m_projectList, clip->getId(), clip->currentProperties(newProps), newProps, true, command);
}
m_activeDocument->commandStack()->push(command);
for (int i = 0; i < cliplist.count(); i++)
if (entry->status() == KNS::Entry::Installed)
kDebug() << "// Installed files: " << entry->installedFiles();
}
-#endif /* KDE_IS_VERSION(4,3,80) */
+#endif
return entries.size();
}
kDebug() << "CURRENT WIDGET: " << par->objectName();
}
+void MainWindow::loadStabilize()
+{
+ QMenu* stabMenu= static_cast<QMenu*>(factory()->container("stabilize", this));
+ if (stabMenu){
+ stabMenu->clear();
+ Mlt::Profile profile;
+ if (Mlt::Factory::filter(profile,(char*)"videostab")){
+ QAction *action=stabMenu->addAction("Videostab (vstab)");
+ action->setData("videostab");
+ connect(action,SIGNAL(triggered()), this, SLOT(slotStabilize()));
+ }
+ if (Mlt::Factory::filter(profile,(char*)"videostab2")){
+ QAction *action=stabMenu->addAction("Videostab (transcode)");
+ action->setData("videostab2");
+ connect(action,SIGNAL(triggered()), this, SLOT(slotStabilize()));
+ }
+ }
+
+
+}
+
void MainWindow::loadTranscoders()
{
QMenu *transMenu = static_cast<QMenu*>(factory()->container("transcoders", this));
transMenu->clear();
+
+ QMenu *extractAudioMenu = static_cast<QMenu*>(factory()->container("extract_audio", this));
+ extractAudioMenu->clear();
KSharedConfigPtr config = KSharedConfig::openConfig("kdenlivetranscodingrc");
KConfigGroup transConfig(config, "Transcoding");
QMapIterator<QString, QString> i(profiles);
while (i.hasNext()) {
i.next();
- QStringList data = i.value().split(";", QString::SkipEmptyParts);
- QAction *a = transMenu->addAction(i.key());
+ QStringList data = i.value().split(";");
+ QAction *a;
+ // separate audio transcoding in a separate menu
+ if (data.count() > 2 && data.at(2) == "audio") {
+ a = extractAudioMenu->addAction(i.key());
+ }
+ else {
+ a = transMenu->addAction(i.key());
+ }
a->setData(data);
- if (data.count() > 1)
- a->setToolTip(data.at(1));
+ if (data.count() > 1) a->setToolTip(data.at(1));
connect(a, SIGNAL(triggered()), this, SLOT(slotTranscode()));
}
}
+void MainWindow::slotStabilize(KUrl::List urls)
+{
+ QString condition,filtername;
+
+ if (urls.isEmpty()) {
+ QAction *action = qobject_cast<QAction *>(sender());
+ if (action){
+ filtername=action->data().toString();
+ urls = m_projectList->getConditionalUrls(condition);
+ }
+ }
+ if (urls.isEmpty()) {
+ m_messageLabel->setMessage(i18n("No clip to transcode"), ErrorMessage);
+ return;
+ }
+ Mlt::Profile profile;
+ Mlt::Filter filter(profile,filtername.toUtf8().data());
+ ClipStabilize *d=new ClipStabilize(urls,filtername,&filter);
+ connect(d, SIGNAL(addClip(KUrl)), this, SLOT(slotAddProjectClip(KUrl)));
+ d->show();
+
+}
+
void MainWindow::slotTranscode(KUrl::List urls)
{
QString params;
QStringList data = action->data().toStringList();
params = data.at(0);
if (data.count() > 1) desc = data.at(1);
- if (data.count() > 2) condition = data.at(2);
- urls << m_projectList->getConditionalUrls(condition);
- urls.removeAll(KUrl());
+ if (data.count() > 3) condition = data.at(3);
+ QStringList ids = m_projectList->getConditionalIds(condition);
+ m_projectList->slotTranscodeClipJob(ids, params, desc);
+ return;
}
if (urls.isEmpty()) {
m_messageLabel->setMessage(i18n("No clip to transcode"), ErrorMessage);
ClipTranscode *d = new ClipTranscode(urls, params, desc);
connect(d, SIGNAL(addClip(KUrl)), this, SLOT(slotAddProjectClip(KUrl)));
d->show();
- //QProcess::startDetached("ffmpeg", parameters);
}
void MainWindow::slotTranscodeClip()
// We need to delete the "aspect_ratio" property because proxy clips
// sometimes have different ratio than original clips
EffectsList::removeProperty(e, "aspect_ratio");
+ EffectsList::removeMetaProperties(e);
}
}
}
void MainWindow::slotUpdateColorScopes()
{
bool request = false;
- kDebug()<<"// UPDATE SCOPES";
for (int i = 0; i < m_gfxScopesList.count(); i++) {
// Check if we need the renderer to send a new frame for update
if (!m_gfxScopesList.at(i)->widget()->visibleRegion().isEmpty() && !(static_cast<AbstractGfxScopeWidget *>(m_gfxScopesList.at(i)->widget())->autoRefreshEnabled())) request = true;
if (request && m_monitorManager->activeRenderer()) {
m_monitorManager->activeRenderer()->sendFrameUpdate();
}
+ if (m_audiosignal->isVisible() && m_recMonitor->abstractRender()) {
+ connect(m_recMonitor->abstractRender(), SIGNAL(audioSamplesSignal(const QVector<int16_t>&, const int&, const int&, const int&)), m_audiosignal, SLOT(slotReceiveAudio(const QVector<int16_t>&, const int&, const int&, const int&)));
+ }
}
void MainWindow::slotClearColorScopes()
kDebug()<<"-----------------------------------------\n"<<"Time elapsed: "<<m_timer.elapsed()<<"\n-------------------------";
}
+
+void MainWindow::slotDownloadAudio()
+{
+ QString currentFolder;
+ if (m_activeDocument) currentFolder = m_activeDocument->projectFolder().path();
+ else currentFolder = KdenliveSettings::defaultprojectfolder();
+ FreeSound *d = new FreeSound(currentFolder);
+ connect(d, SIGNAL(addClip(KUrl, const QString &)), this, SLOT(slotAddProjectClip(KUrl, const QString &)));
+ d->show();
+}
+
#include "mainwindow.moc"
#ifdef DEBUG_MAINW
projects / kdenlive / blobdiff