* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA *
***************************************************************************/
-#include <QLabel>
-#include <QFile>
-#include <QXmlStreamWriter>
-#include <QApplication>
-#include <QTimer>
+#include "wizard.h"
+#include "kdenlivesettings.h"
+#include "profilesdialog.h"
+#include "kdenlive-config.h"
#include <KStandardDirs>
#include <KLocale>
#include <KProcess>
#include <kmimetype.h>
+#include <KRun>
-#include "kdenlivesettings.h"
-#include "profilesdialog.h"
-#include "wizard.h"
+#include <QLabel>
+#include <QFile>
+#include <QXmlStreamWriter>
+#include <QTimer>
+
+const double recommendedMltVersion = 40;
+static const char version[] = VERSION;
-Wizard::Wizard(QWidget *parent): QWizard(parent) {
+Wizard::Wizard(bool upgrade, QWidget *parent) :
+ QWizard(parent)
+{
+ setWindowTitle(i18n("Config Wizard"));
setPixmap(QWizard::WatermarkPixmap, QPixmap(KStandardDirs::locate("appdata", "banner.png")));
QWizardPage *page1 = new QWizardPage;
page1->setTitle(i18n("Welcome"));
- QLabel *label = new QLabel(i18n("This is the first time you run Kdenlive. This wizard will let you adjust some basic settings, you will be ready to edit your first movie in a few seconds..."));
+ QLabel *label;
+ if (upgrade)
+ label = new QLabel(i18n("Your Kdenlive version was upgraded to version %1. Please take some time to review the basic settings", QString(version).section(' ', 0, 0)));
+ else
+ label = new QLabel(i18n("This is the first time you run Kdenlive. This wizard will let you adjust some basic settings, you will be ready to edit your first movie in a few seconds..."));
label->setWordWrap(true);
m_startLayout = new QVBoxLayout;
m_startLayout->addWidget(label);
+ QPushButton *but = new QPushButton(KIcon("help-about"), i18n("Discover the features of this Kdenlive release"), this);
+ connect(but, SIGNAL(clicked()), this, SLOT(slotShowWebInfos()));
+ m_startLayout->addStretch();
+ m_startLayout->addWidget(but);
+
+
page1->setLayout(m_startLayout);
addPage(page1);
+ QWizardPage *page4 = new QWizardPage;
+ page4->setTitle(i18n("Checking MLT engine"));
+ m_mltCheck.setupUi(page4);
+ addPage(page4);
+
+ WizardDelegate *listViewDelegate = new WizardDelegate(m_mltCheck.programList);
+ m_mltCheck.programList->setItemDelegate(listViewDelegate);
+
QWizardPage *page2 = new QWizardPage;
page2->setTitle(i18n("Video Standard"));
m_standard.setupUi(page2);
+ m_okIcon = KIcon("dialog-ok");
+ m_badIcon = KIcon("dialog-close");
+
// build profiles lists
- m_profilesInfo = ProfilesDialog::getProfilesInfo();
- QMap<QString, QString>::const_iterator i = m_profilesInfo.constBegin();
- while (i != m_profilesInfo.constEnd()) {
+ QMap<QString, QString> profilesInfo = ProfilesDialog::getProfilesInfo();
+ QMap<QString, QString>::const_iterator i = profilesInfo.constBegin();
+ while (i != profilesInfo.constEnd()) {
QMap< QString, QString > profileData = ProfilesDialog::getSettingsFromFile(i.value());
- if (profileData.value("width") == "720") m_dvProfiles.append(i.key());
- else if (profileData.value("width").toInt() >= 1080) m_hdvProfiles.append(i.key());
- else m_otherProfiles.append(i.key());
+ if (profileData.value("width") == "720") m_dvProfiles.insert(i.key(), i.value());
+ else if (profileData.value("width").toInt() >= 1080) m_hdvProfiles.insert(i.key(), i.value());
+ else m_otherProfiles.insert(i.key(), i.value());
++i;
}
+ m_standard.button_all->setChecked(true);
connect(m_standard.button_all, SIGNAL(toggled(bool)), this, SLOT(slotCheckStandard()));
connect(m_standard.button_hdv, SIGNAL(toggled(bool)), this, SLOT(slotCheckStandard()));
connect(m_standard.button_dv, SIGNAL(toggled(bool)), this, SLOT(slotCheckStandard()));
- m_standard.button_all->setChecked(true);
+ slotCheckStandard();
connect(m_standard.profiles_list, SIGNAL(itemSelectionChanged()), this, SLOT(slotCheckSelectedItem()));
+
+ if (!KdenliveSettings::default_profile().isEmpty()) {
+ for (int i = 0; i < m_standard.profiles_list->count(); i++) {
+ if (m_standard.profiles_list->item(i)->data(Qt::UserRole).toString() == KdenliveSettings::default_profile()) {
+ m_standard.profiles_list->setCurrentRow(i);
+ m_standard.profiles_list->scrollToItem(m_standard.profiles_list->currentItem());
+ break;
+ }
+ }
+ }
+
// select default profile
+ fprintf(stderr, "LOOKING FOR: %s", ProfilesDialog::getProfileDescription(KdenliveSettings::default_profile()).toUtf8().data());
QList<QListWidgetItem *> profiles = m_standard.profiles_list->findItems(ProfilesDialog::getProfileDescription(KdenliveSettings::default_profile()), Qt::MatchExactly);
if (profiles.count() > 0) m_standard.profiles_list->setCurrentItem(profiles.at(0));
+
+ fprintf(stderr, "LOOKING FOR: %s // %d", ProfilesDialog::getProfileDescription(KdenliveSettings::default_profile()).toUtf8().data(), profiles.count());
addPage(page2);
QWizardPage *page3 = new QWizardPage;
page3->setTitle(i18n("Additional Settings"));
m_extra.setupUi(page3);
m_extra.projectfolder->setMode(KFile::Directory);
- m_extra.projectfolder->setPath(QDir::homePath() + "/kdenlive");
+ m_extra.projectfolder->setPath(KdenliveSettings::defaultprojectfolder());
m_extra.videothumbs->setChecked(KdenliveSettings::videothumbnails());
m_extra.audiothumbs->setChecked(KdenliveSettings::audiothumbnails());
m_extra.autosave->setChecked(KdenliveSettings::crashrecovery());
addPage(page3);
- QWizardPage *page4 = new QWizardPage;
- page4->setTitle(i18n("Checking system"));
- m_check.setupUi(page4);
- slotCheckPrograms();
- addPage(page4);
+ QWizardPage *page5 = new QWizardPage;
+ page5->setTitle(i18n("Checking system"));
+ m_check.setupUi(page5);
+ addPage(page5);
- WizardDelegate *listViewDelegate = new WizardDelegate(m_check.programList);
+ listViewDelegate = new WizardDelegate(m_check.programList);
m_check.programList->setItemDelegate(listViewDelegate);
QTimer::singleShot(500, this, SLOT(slotCheckMlt()));
}
-void Wizard::slotCheckPrograms() {
+
+void Wizard::checkMltComponents()
+{
+ m_mltCheck.programList->setColumnCount(2);
+ m_mltCheck.programList->setRootIsDecorated(false);
+ m_mltCheck.programList->setHeaderHidden(true);
+ QSize itemSize(20, fontMetrics().height() * 2.5);
+ m_mltCheck.programList->setColumnWidth(0, 30);
+ m_mltCheck.programList->setIconSize(QSize(24, 24));
+
+
+ QTreeWidgetItem *mltitem = new QTreeWidgetItem(m_mltCheck.programList);
+
+ QTreeWidgetItem *meltitem = new QTreeWidgetItem(m_mltCheck.programList, QStringList() << QString() << i18n("Melt") + " (" + KdenliveSettings::rendererpath() + ')');
+ meltitem->setData(1, Qt::UserRole, i18n("Required for rendering (part of MLT package)"));
+ meltitem->setSizeHint(0, itemSize);
+ meltitem->setIcon(0, m_okIcon);
+
+ // Check MLT's installed producers
+ QProcess checkProcess;
+ checkProcess.start(KdenliveSettings::rendererpath(), QStringList() << "-query" << "producer");
+ if (!checkProcess.waitForStarted()) {
+ meltitem->setIcon(0, m_badIcon);
+ meltitem->setData(1, Qt::UserRole, i18n("Error starting MLT's command line player (melt)"));
+ button(QWizard::NextButton)->setEnabled(false);
+ } else {
+ checkProcess.waitForFinished();
+ QByteArray result = checkProcess.readAllStandardError();
+
+ // Check MLT avformat module
+ QTreeWidgetItem *avformatItem = new QTreeWidgetItem(m_mltCheck.programList, QStringList() << QString() << i18n("Avformat module (FFmpeg)"));
+ avformatItem->setData(1, Qt::UserRole, i18n("Required to work with various video formats (hdv, mpeg, flash, ...)"));
+ avformatItem->setSizeHint(0, itemSize);
+ if (!result.contains("- avformat")) {
+ avformatItem->setIcon(0, m_badIcon);
+ m_mltCheck.tabWidget->setTabEnabled(1, false);
+ } else {
+ avformatItem->setIcon(0, m_okIcon);
+ // Make sure we have MLT > 0.3.4
+ int version = 0;
+ QString mltVersion;
+ QString exepath = KStandardDirs::findExe("pkg-config");
+ if (!exepath.isEmpty()) {
+ checkProcess.start(exepath, QStringList() << "--variable=version" << "mlt++");
+ if (!checkProcess.waitForStarted()) {
+ kDebug() << "// Error querying MLT's version";
+ } else {
+ checkProcess.waitForFinished();
+ mltVersion = checkProcess.readAllStandardOutput();
+ version = 100 * mltVersion.section('.', 0, 0).toInt() + 10 * mltVersion.section('.', 1, 1).toInt() + mltVersion.section('.', 2, 2).toInt();
+ kDebug() << "// FOUND MLT's pkgconfig version: " << version;
+ }
+ }
+ if (version == 0) {
+ checkProcess.start(KdenliveSettings::rendererpath(), QStringList() << "--version");
+ if (!checkProcess.waitForStarted()) {
+ kDebug() << "// Error querying MLT's version";
+ } else {
+ checkProcess.waitForFinished();
+ mltVersion = checkProcess.readAllStandardError();
+ mltVersion = mltVersion.section('\n', 0, 0).simplified();
+ mltVersion = mltVersion.section(' ', -1).simplified();
+ version = 100 * mltVersion.section('.', 0, 0).toInt() + 10 * mltVersion.section('.', 1, 1).toInt() + mltVersion.section('.', 2, 2).toInt();
+ kDebug() << "// FOUND MLT version: " << version;
+ }
+ }
+
+ mltitem->setText(1, i18n("MLT version: %1", mltVersion.simplified()));
+ mltitem->setSizeHint(0, itemSize);
+ if (version < 40) {
+ mltitem->setData(1, Qt::UserRole, i18n("Your MLT version is unsupported!!!"));
+ mltitem->setIcon(0, m_badIcon);
+ } else {
+ if (version < recommendedMltVersion) {
+ mltitem->setData(1, Qt::UserRole, i18n("Please upgrade to the latest MLT version"));
+ mltitem->setIcon(0, m_badIcon);
+ } else {
+ mltitem->setData(1, Qt::UserRole, i18n("MLT version is correct"));
+ mltitem->setIcon(0, m_okIcon);
+ }
+ // Check installed audio codecs
+ QProcess checkProcess2;
+ checkProcess2.start(KdenliveSettings::rendererpath(), QStringList() << "noise:" << "-consumer" << "avformat" << "acodec=list");
+ if (!checkProcess2.waitForStarted()) {
+ m_mltCheck.tabWidget->setTabEnabled(1, false);
+ kDebug() << "// Error parsing MLT's avformat codecs";
+ } else {
+ checkProcess2.waitForFinished();
+ QByteArray codecList = checkProcess2.readAllStandardError();
+ QString acodecList(codecList);
+ QStringList result;
+ QStringList alist = acodecList.split('\n', QString::SkipEmptyParts);
+ for (int i = 0; i < alist.count(); i++) {
+ if (alist.at(i).contains("- ")) result.append(alist.at(i).section("- ", 1).simplified().toLower());
+ }
+ m_mltCheck.acodecs_list->addItems(result);
+ KdenliveSettings::setAudiocodecs(result);
+ //kDebug()<<"// FOUND LIST:\n\n"<<m_audioCodecs<<"\n\n++++++++++++++++++++";
+ }
+ // Check video codecs
+ checkProcess2.start(KdenliveSettings::rendererpath(), QStringList() << "noise:" << "-consumer" << "avformat" << "vcodec=list");
+ if (!checkProcess2.waitForStarted()) {
+ kDebug() << "// Error parsing MLT's avformat codecs";
+ } else {
+ checkProcess2.waitForFinished();
+ QByteArray codecList = checkProcess2.readAllStandardError();
+ QString vcodecList(codecList);
+ QStringList result;
+ QStringList vlist = vcodecList.split('\n', QString::SkipEmptyParts);
+ for (int i = 0; i < vlist.count(); i++) {
+ if (vlist.at(i).contains("- ")) result.append(vlist.at(i).section("- ", 1).simplified().toLower());
+ }
+ m_mltCheck.vcodecs_list->addItems(result);
+ KdenliveSettings::setVideocodecs(result);
+ //kDebug()<<"// FOUND LIST:\n\n"<<m_videoCodecs<<"\n\n++++++++++++++++++++";
+ }
+ // Check formats
+ checkProcess2.start(KdenliveSettings::rendererpath(), QStringList() << "noise:" << "-consumer" << "avformat" << "f=list");
+ if (!checkProcess2.waitForStarted()) {
+ kDebug() << "// Error parsing MLT's avformat codecs";
+ } else {
+ checkProcess2.waitForFinished();
+ QByteArray codecList = checkProcess2.readAllStandardError();
+ QString vcodecList(codecList);
+ QStringList result;
+ QStringList vlist = vcodecList.split('\n', QString::SkipEmptyParts);
+ for (int i = 0; i < vlist.count(); i++) {
+ if (vlist.at(i).contains("- ")) {
+ QString format = vlist.at(i).section("- ", 1).simplified().toLower();
+ if (format.contains(',')) {
+ QStringList sub = format.split(',', QString::SkipEmptyParts);
+ for (int j = 0; j < sub.count(); j++)
+ result.append(sub.at(j));
+ } else result.append(format);
+ }
+ }
+ m_mltCheck.formats_list->addItems(result);
+ KdenliveSettings::setSupportedformats(result);
+ //kDebug()<<"// FOUND LIST:\n\n"<<m_videoCodecs<<"\n\n++++++++++++++++++++";
+ }
+ }
+
+ }
+
+ // Check MLT dv module
+ QTreeWidgetItem *dvItem = new QTreeWidgetItem(m_mltCheck.programList, QStringList() << QString() << i18n("DV module (libdv)"));
+ dvItem->setData(1, Qt::UserRole, i18n("Required to work with dv files if avformat module is not installed"));
+ dvItem->setSizeHint(0, itemSize);
+ if (!result.contains("- libdv")) {
+ dvItem->setIcon(0, m_badIcon);
+ } else {
+ dvItem->setIcon(0, m_okIcon);
+ }
+
+ // Check MLT image format module
+ QTreeWidgetItem *imageItem = new QTreeWidgetItem(m_mltCheck.programList, QStringList() << QString() << i18n("QImage module"));
+ imageItem->setData(1, Qt::UserRole, i18n("Required to work with images"));
+ imageItem->setSizeHint(0, itemSize);
+ if (!result.contains("- qimage")) {
+ imageItem->setIcon(0, m_badIcon);
+ imageItem = new QTreeWidgetItem(m_mltCheck.programList, QStringList() << QString() << i18n("Pixbuf module"));
+ imageItem->setData(1, Qt::UserRole, i18n("Required to work with images"));
+ imageItem->setSizeHint(0, itemSize);
+ if (!result.contains("- pixbuf")) imageItem->setIcon(0, m_badIcon);
+ else imageItem->setIcon(0, m_okIcon);
+ } else {
+ imageItem->setIcon(0, m_okIcon);
+ }
+ }
+}
+
+void Wizard::slotCheckPrograms()
+{
m_check.programList->setColumnCount(2);
m_check.programList->setRootIsDecorated(false);
m_check.programList->setHeaderHidden(true);
- QSize itemSize(20, this->fontMetrics().height() * 2.5);
- KIcon okIcon("dialog-ok");
- KIcon missingIcon("dialog-close");
+ QSize itemSize(20, fontMetrics().height() * 2.5);
m_check.programList->setColumnWidth(0, 30);
m_check.programList->setIconSize(QSize(24, 24));
+
QTreeWidgetItem *item = new QTreeWidgetItem(m_check.programList, QStringList() << QString() << i18n("FFmpeg & ffplay"));
item->setData(1, Qt::UserRole, i18n("Required for webcam capture"));
item->setSizeHint(0, itemSize);
QString exepath = KStandardDirs::findExe("ffmpeg");
- if (exepath.isEmpty()) item->setIcon(0, missingIcon);
- else if (KStandardDirs::findExe("ffplay").isEmpty()) item->setIcon(0, missingIcon);
- else item->setIcon(0, okIcon);
+ if (exepath.isEmpty()) item->setIcon(0, m_badIcon);
+ else if (KStandardDirs::findExe("ffplay").isEmpty()) item->setIcon(0, m_badIcon);
+ else item->setIcon(0, m_okIcon);
item = new QTreeWidgetItem(m_check.programList, QStringList() << QString() << i18n("Recordmydesktop"));
item->setData(1, Qt::UserRole, i18n("Required for screen capture"));
item->setSizeHint(0, itemSize);
- if (KStandardDirs::findExe("recordmydesktop").isEmpty()) item->setIcon(0, missingIcon);
- else item->setIcon(0, okIcon);
+ if (KStandardDirs::findExe("recordmydesktop").isEmpty()) item->setIcon(0, m_badIcon);
+ else item->setIcon(0, m_okIcon);
item = new QTreeWidgetItem(m_check.programList, QStringList() << QString() << i18n("Dvgrab"));
item->setData(1, Qt::UserRole, i18n("Required for firewire capture"));
item->setSizeHint(0, itemSize);
- if (KStandardDirs::findExe("dvgrab").isEmpty()) item->setIcon(0, missingIcon);
- else item->setIcon(0, okIcon);
+ if (KStandardDirs::findExe("dvgrab").isEmpty()) item->setIcon(0, m_badIcon);
+ else item->setIcon(0, m_okIcon);
+
+ item = new QTreeWidgetItem(m_check.programList, QStringList() << QString() << i18n("Dvdauthor"));
+ item->setData(1, Qt::UserRole, i18n("Required for creation of DVD"));
+ item->setSizeHint(0, itemSize);
+ if (KStandardDirs::findExe("dvdauthor").isEmpty()) item->setIcon(0, m_badIcon);
+ else item->setIcon(0, m_okIcon);
- item = new QTreeWidgetItem(m_check.programList, QStringList() << QString() << i18n("Inigo"));
- item->setData(1, Qt::UserRole, i18n("Required for rendering (part of MLT package)"));
+ item = new QTreeWidgetItem(m_check.programList, QStringList() << QString() << i18n("Mkisofs"));
+ item->setData(1, Qt::UserRole, i18n("Required for creation of DVD ISO images"));
item->setSizeHint(0, itemSize);
- if (KStandardDirs::findExe("inigo").isEmpty()) item->setIcon(0, missingIcon);
- else item->setIcon(0, okIcon);
+ if (KStandardDirs::findExe("mkisofs").isEmpty()) item->setIcon(0, m_badIcon);
+ else item->setIcon(0, m_okIcon);
+
}
-void Wizard::installExtraMimes(QString baseName, QStringList globs) {
+void Wizard::installExtraMimes(QString baseName, QStringList globs)
+{
QString mimefile = baseName;
mimefile.replace('/', '-');
KMimeType::Ptr mime = KMimeType::mimeType(baseName);
}
}
-void Wizard::runUpdateMimeDatabase() {
+void Wizard::runUpdateMimeDatabase()
+{
const QString localPackageDir = KStandardDirs::locateLocal("xdgdata-mime", QString());
//Q_ASSERT(!localPackageDir.isEmpty());
KProcess proc;
}
}
-void Wizard::slotCheckThumbs() {
+void Wizard::slotCheckThumbs()
+{
QString pixname = "timeline_vthumbs.png";
if (!m_extra.audiothumbs->isChecked() && !m_extra.videothumbs->isChecked()) {
pixname = "timeline_nothumbs.png";
m_extra.timeline_preview->setPixmap(QPixmap(KStandardDirs::locate("appdata", pixname)));
}
-void Wizard::slotCheckStandard() {
+void Wizard::slotCheckStandard()
+{
m_standard.profiles_list->clear();
QStringList profiles;
- if (m_standard.button_dv->isChecked()) {
+ if (!m_standard.button_hdv->isChecked()) {
// DV standard
- m_standard.profiles_list->addItems(m_dvProfiles);
- } else if (m_standard.button_hdv->isChecked()) {
+ QMapIterator<QString, QString> i(m_dvProfiles);
+ while (i.hasNext()) {
+ i.next();
+ QListWidgetItem *item = new QListWidgetItem(i.key(), m_standard.profiles_list);
+ item->setData(Qt::UserRole, i.value());
+ }
+ }
+ if (!m_standard.button_dv->isChecked()) {
// HDV standard
- m_standard.profiles_list->addItems(m_hdvProfiles);
- } else {
- m_standard.profiles_list->addItems(m_dvProfiles);
- m_standard.profiles_list->addItems(m_hdvProfiles);
- m_standard.profiles_list->addItems(m_otherProfiles);
+ QMapIterator<QString, QString> i(m_hdvProfiles);
+ while (i.hasNext()) {
+ i.next();
+ QListWidgetItem *item = new QListWidgetItem(i.key(), m_standard.profiles_list);
+ item->setData(Qt::UserRole, i.value());
+ }
+ }
+ if (m_standard.button_all->isChecked()) {
+ QMapIterator<QString, QString> i(m_otherProfiles);
+ while (i.hasNext()) {
+ i.next();
+ QListWidgetItem *item = new QListWidgetItem(i.key(), m_standard.profiles_list);
+ item->setData(Qt::UserRole, i.value());
+ }
//m_standard.profiles_list->sortItems();
}
for (int i = 0; i < m_standard.profiles_list->count(); i++) {
QListWidgetItem *item = m_standard.profiles_list->item(i);
- MltVideoProfile prof = ProfilesDialog::getVideoProfile(m_profilesInfo.value(item->text()));
- const QString infoString = i18n("<b>Frame size:</b>%1x%2<br><b>Frame rate:</b>%3/%4<br><b>Aspect ratio:</b>%5/%6<br><b>Display ratio:</b>%7/%8").arg(QString::number(prof.width), QString::number(prof.height), QString::number(prof.frame_rate_num), QString::number(prof.frame_rate_den), QString::number(prof.sample_aspect_num), QString::number(prof.sample_aspect_den), QString::number(prof.display_aspect_num), QString::number(prof.display_aspect_den));
+
+ QMap< QString, QString > values = ProfilesDialog::getSettingsFromFile(item->data(Qt::UserRole).toString());
+ const QString infoString = ("<strong>" + i18n("Frame size:") + " </strong>%1x%2<br /><strong>" + i18n("Frame rate:") + " </strong>%3/%4<br /><strong>" + i18n("Pixel aspect ratio:") + "</strong>%5/%6<br /><strong>" + i18n("Display aspect ratio:") + " </strong>%7/%8").arg(values.value("width"), values.value("height"), values.value("frame_rate_num"), values.value("frame_rate_den"), values.value("sample_aspect_num"), values.value("sample_aspect_den"), values.value("display_aspect_num"), values.value("display_aspect_den"));
item->setToolTip(infoString);
}
m_standard.profiles_list->setCurrentRow(0);
}
-void Wizard::slotCheckSelectedItem() {
+void Wizard::slotCheckSelectedItem()
+{
// Make sure we always have an item highlighted
m_standard.profiles_list->setCurrentRow(m_standard.profiles_list->currentRow());
}
-void Wizard::adjustSettings() {
+void Wizard::adjustSettings()
+{
if (m_extra.installmimes->isChecked()) {
QStringList globs;
- globs << "*.mts" << "*.m2t" << "*.mod" << "*.ts";
+ globs << "*.mts" << "*.m2t" << "*.mod" << "*.ts" << "*.m2ts";
installExtraMimes("video/mpeg", globs);
globs.clear();
globs << "*.dv";
KdenliveSettings::setVideothumbnails(m_extra.videothumbs->isChecked());
KdenliveSettings::setCrashrecovery(m_extra.autosave->isChecked());
if (m_standard.profiles_list->currentItem()) {
- QString selectedProfile = m_profilesInfo.value(m_standard.profiles_list->currentItem()->text());
+ QString selectedProfile = m_standard.profiles_list->currentItem()->data(Qt::UserRole).toString();
if (selectedProfile.isEmpty()) selectedProfile = "dv_pal";
KdenliveSettings::setDefault_profile(selectedProfile);
}
QString path = m_extra.projectfolder->url().path();
- if (KStandardDirs::makeDir(path) == false) kDebug() << "/// ERROR CREATING PROJECT FOLDER: " << path;
+ if (KStandardDirs::makeDir(path) == false) kDebug() << "/// ERROR CREATING PROJECT FOLDER: " << path;
KdenliveSettings::setDefaultprojectfolder(path);
}
-void Wizard::slotCheckMlt() {
+void Wizard::slotCheckMlt()
+{
QString errorMessage;
if (KdenliveSettings::rendererpath().isEmpty()) {
- errorMessage.append(i18n("your MLT installation cannot be found. Install MLT and restart Kdenlive.\n"));
+ errorMessage.append(i18n("Your MLT installation cannot be found. Install MLT and restart Kdenlive.\n"));
}
- QProcess checkProcess;
+ /*QProcess checkProcess;
checkProcess.start(KdenliveSettings::rendererpath(), QStringList() << "-query" << "producer");
if (!checkProcess.waitForStarted())
- errorMessage.append(i18n("Error starting MLT's command line player (inigo)") + ".\n");
+ errorMessage.append(i18n("Error starting MLT's command line player (melt)") + ".\n");
checkProcess.waitForFinished();
QByteArray result = checkProcess.readAllStandardError();
- if (!result.contains("- avformat")) errorMessage.append(i18n("MLT's avformat (FFMPEG) module not found. Please check your FFMPEG and MLT install. Kdenlive will not work until this issue is fixed.") + "\n");
+ if (!result.contains("- avformat")) errorMessage.append(i18n("MLT's avformat (FFMPEG) module not found. Please check your FFMPEG and MLT install. Kdenlive will not work until this issue is fixed.") + "\n");*/
QProcess checkProcess2;
checkProcess2.start(KdenliveSettings::rendererpath(), QStringList() << "-query" << "consumer");
if (!checkProcess2.waitForStarted())
- errorMessage.append(i18n("Error starting MLT's command line player (inigo).") + "\n");
+ errorMessage.append(i18n("Error starting MLT's command line player (melt).") + '\n');
checkProcess2.waitForFinished();
- result = checkProcess2.readAllStandardError();
- if (!result.contains("sdl") || !result.contains("sdl_preview")) errorMessage.append(i18n("MLT's SDL module not found. Please check your MLT install. Kdenlive will not work until this issue is fixed.") + "\n");
+ QByteArray result = checkProcess2.readAllStandardError();
+ if (!result.contains("sdl") || !result.contains("sdl_preview")) errorMessage.append(i18n("MLT's SDL module not found. Please check your MLT install. Kdenlive will not work until this issue is fixed.") + '\n');
if (!errorMessage.isEmpty()) {
errorMessage.prepend(QString("<b>%1</b><br>").arg(i18n("Fatal Error")));
m_systemCheckIsOk = false;
button(QWizard::NextButton)->setEnabled(false);
} else m_systemCheckIsOk = true;
+
+ if (m_systemCheckIsOk) checkMltComponents();
+ slotCheckPrograms();
}
-bool Wizard::isOk() const {
+bool Wizard::isOk() const
+{
return m_systemCheckIsOk;
}
+bool Wizard::slotShowWebInfos()
+{
+ KRun::runUrl(KUrl("http://kdenlive.org/discover/" + QString(version).section(' ', 0, 0)), "text/html", this);
+}
+
#include "wizard.moc"
projects / kdenlive / blobdiff