#include "wizard.h"
#include "kdenlivesettings.h"
#include "profilesdialog.h"
+#ifdef USE_V4L
+#include "v4l/v4lcapture.h"
+#endif
+#include "config-kdenlive.h"
+
+#include <mlt++/Mlt.h>
+#include <framework/mlt_version.h>
#include <KStandardDirs>
#include <KLocale>
#include <KProcess>
#include <kmimetype.h>
+#include <KRun>
+#include <KService>
+#include <KMimeTypeTrader>
#include <QLabel>
#include <QFile>
#include <QXmlStreamWriter>
#include <QTimer>
-const double recommendedMltVersion = 40;
+// Recommended MLT version
+const int mltVersionMajor = 0;
+const int mltVersionMinor = 7;
+const int mltVersionRevision = 6;
+
+static const char kdenlive_version[] = VERSION;
Wizard::Wizard(bool upgrade, QWidget *parent) :
- QWizard(parent)
+ QWizard(parent),
+ m_systemCheckIsOk(false)
{
setWindowTitle(i18n("Config Wizard"));
setPixmap(QWizard::WatermarkPixmap, QPixmap(KStandardDirs::locate("appdata", "banner.png")));
page1->setTitle(i18n("Welcome"));
QLabel *label;
if (upgrade)
- label = new QLabel(i18n("Your Kdenlive version was upgraded. Please take some time to review the basic settings"));
+ label = new QLabel(i18n("Your Kdenlive version was upgraded to version %1. Please take some time to review the basic settings", QString(kdenlive_version).section(' ', 0, 0)));
else
label = new QLabel(i18n("This is the first time you run Kdenlive. This wizard will let you adjust some basic settings, you will be ready to edit your first movie in a few seconds..."));
label->setWordWrap(true);
m_startLayout = new QVBoxLayout;
m_startLayout->addWidget(label);
+ QPushButton *but = new QPushButton(KIcon("help-about"), i18n("Discover the features of this Kdenlive release"), this);
+ connect(but, SIGNAL(clicked()), this, SLOT(slotShowWebInfos()));
+ m_startLayout->addStretch();
+ m_startLayout->addWidget(but);
+
+
page1->setLayout(m_startLayout);
addPage(page1);
slotCheckStandard();
connect(m_standard.profiles_list, SIGNAL(itemSelectionChanged()), this, SLOT(slotCheckSelectedItem()));
-
+ // select default profile
if (!KdenliveSettings::default_profile().isEmpty()) {
for (int i = 0; i < m_standard.profiles_list->count(); i++) {
if (m_standard.profiles_list->item(i)->data(Qt::UserRole).toString() == KdenliveSettings::default_profile()) {
}
}
- // select default profile
- fprintf(stderr, "LOOKING FOR: %s", ProfilesDialog::getProfileDescription(KdenliveSettings::default_profile()).toUtf8().data());
- QList<QListWidgetItem *> profiles = m_standard.profiles_list->findItems(ProfilesDialog::getProfileDescription(KdenliveSettings::default_profile()), Qt::MatchExactly);
- if (profiles.count() > 0) m_standard.profiles_list->setCurrentItem(profiles.at(0));
-
- fprintf(stderr, "LOOKING FOR: %s // %d", ProfilesDialog::getProfileDescription(KdenliveSettings::default_profile()).toUtf8().data(), profiles.count());
addPage(page2);
QWizardPage *page3 = new QWizardPage;
page3->setTitle(i18n("Additional Settings"));
m_extra.setupUi(page3);
m_extra.projectfolder->setMode(KFile::Directory);
- m_extra.projectfolder->setPath(KdenliveSettings::defaultprojectfolder());
+ m_extra.projectfolder->setUrl(KUrl(KdenliveSettings::defaultprojectfolder()));
m_extra.videothumbs->setChecked(KdenliveSettings::videothumbnails());
m_extra.audiothumbs->setChecked(KdenliveSettings::audiothumbnails());
m_extra.autosave->setChecked(KdenliveSettings::crashrecovery());
slotCheckThumbs();
addPage(page3);
+#ifndef Q_WS_MAC
+ QWizardPage *page6 = new QWizardPage;
+ page6->setTitle(i18n("Webcam"));
+ m_capture.setupUi(page6);
+ connect(m_capture.button_reload, SIGNAL(clicked()), this, SLOT(slotDetectWebcam()));
+ connect(m_capture.v4l_devices, SIGNAL(currentIndexChanged(int)), this, SLOT(slotUpdateCaptureParameters()));
+ connect(m_capture.v4l_formats, SIGNAL(currentIndexChanged(int)), this, SLOT(slotSaveCaptureFormat()));
+ m_capture.button_reload->setIcon(KIcon("view-refresh"));
+
+ addPage(page6);
+#endif
QWizardPage *page5 = new QWizardPage;
page5->setTitle(i18n("Checking system"));
listViewDelegate = new WizardDelegate(m_check.programList);
m_check.programList->setItemDelegate(listViewDelegate);
-
+ slotDetectWebcam();
QTimer::singleShot(500, this, SLOT(slotCheckMlt()));
}
+void Wizard::slotDetectWebcam()
+{
+#ifdef USE_V4L
+ m_capture.v4l_devices->blockSignals(true);
+ m_capture.v4l_devices->clear();
+
+ // Video 4 Linux device detection
+ for (int i = 0; i < 10; i++) {
+ QString path = "/dev/video" + QString::number(i);
+ if (QFile::exists(path)) {
+ QStringList deviceInfo = V4lCaptureHandler::getDeviceName(path.toUtf8().constData());
+ if (!deviceInfo.isEmpty()) {
+ m_capture.v4l_devices->addItem(deviceInfo.at(0), path);
+ m_capture.v4l_devices->setItemData(m_capture.v4l_devices->count() - 1, deviceInfo.at(1), Qt::UserRole + 1);
+ }
+ }
+ }
+ if (m_capture.v4l_devices->count() > 0) {
+ m_capture.v4l_status->setText(i18n("Select your default video4linux device"));
+ // select default device
+ bool found = false;
+ for (int i = 0; i < m_capture.v4l_devices->count(); i++) {
+ QString device = m_capture.v4l_devices->itemData(i).toString();
+ if (device == KdenliveSettings::video4vdevice()) {
+ m_capture.v4l_devices->setCurrentIndex(i);
+ found = true;
+ break;
+ }
+ }
+ slotUpdateCaptureParameters();
+ if (!found) m_capture.v4l_devices->setCurrentIndex(0);
+ } else m_capture.v4l_status->setText(i18n("No device found, plug your webcam and refresh."));
+ m_capture.v4l_devices->blockSignals(false);
+#endif /* USE_V4L */
+}
+
+void Wizard::slotUpdateCaptureParameters()
+{
+ QString device = m_capture.v4l_devices->itemData(m_capture.v4l_devices->currentIndex()).toString();
+ if (!device.isEmpty()) KdenliveSettings::setVideo4vdevice(device);
+
+ QString formats = m_capture.v4l_devices->itemData(m_capture.v4l_devices->currentIndex(), Qt::UserRole + 1).toString();
+
+ m_capture.v4l_formats->blockSignals(true);
+ m_capture.v4l_formats->clear();
+
+ QString vl4ProfilePath = KStandardDirs::locateLocal("appdata", "profiles/video4linux");
+ if (QFile::exists(vl4ProfilePath)) {
+ MltVideoProfile profileInfo = ProfilesDialog::getVideoProfile(vl4ProfilePath);
+ m_capture.v4l_formats->addItem(i18n("Current settings (%1x%2, %3/%4fps)", profileInfo.width, profileInfo.height, profileInfo.frame_rate_num, profileInfo.frame_rate_den), QStringList() << QString("unknown") <<QString::number(profileInfo.width)<<QString::number(profileInfo.height)<<QString::number(profileInfo.frame_rate_num)<<QString::number(profileInfo.frame_rate_den));
+ }
+ QStringList pixelformats = formats.split(">", QString::SkipEmptyParts);
+ QString itemSize;
+ QString pixelFormat;
+ QStringList itemRates;
+ for (int i = 0; i < pixelformats.count(); i++) {
+ QString format = pixelformats.at(i).section(':', 0, 0);
+ QStringList sizes = pixelformats.at(i).split(":", QString::SkipEmptyParts);
+ pixelFormat = sizes.takeFirst();
+ for (int j = 0; j < sizes.count(); j++) {
+ itemSize = sizes.at(j).section("=", 0, 0);
+ itemRates = sizes.at(j).section("=", 1, 1).split(",", QString::SkipEmptyParts);
+ for (int k = 0; k < itemRates.count(); k++) {
+ QString formatDescription = "[" + format + "] " + itemSize + " (" + itemRates.at(k) + ")";
+ if (m_capture.v4l_formats->findText(formatDescription) == -1)
+ m_capture.v4l_formats->addItem(formatDescription, QStringList() << format << itemSize.section('x', 0, 0) << itemSize.section('x', 1, 1) << itemRates.at(k).section('/', 0, 0) << itemRates.at(k).section('/', 1, 1));
+ }
+ }
+ }
+ if (!QFile::exists(vl4ProfilePath)) {
+ if (m_capture.v4l_formats->count() > 9) slotSaveCaptureFormat();
+ else {
+ // No existing profile and no autodetected profiles
+ MltVideoProfile profileInfo;
+ profileInfo.width = 320;
+ profileInfo.height = 200;
+ profileInfo.frame_rate_num = 15;
+ profileInfo.frame_rate_den = 1;
+ profileInfo.display_aspect_num = 4;
+ profileInfo.display_aspect_den = 3;
+ profileInfo.sample_aspect_num = 1;
+ profileInfo.sample_aspect_den = 1;
+ profileInfo.progressive = 1;
+ profileInfo.colorspace = 601;
+ ProfilesDialog::saveProfile(profileInfo, vl4ProfilePath);
+ m_capture.v4l_formats->addItem(i18n("Default settings (%1x%2, %3/%4fps)", profileInfo.width, profileInfo.height, profileInfo.frame_rate_num, profileInfo.frame_rate_den), QStringList() << QString("unknown") <<QString::number(profileInfo.width)<<QString::number(profileInfo.height)<<QString::number(profileInfo.frame_rate_num)<<QString::number(profileInfo.frame_rate_den));
+ }
+ }
+ m_capture.v4l_formats->blockSignals(false);
+}
void Wizard::checkMltComponents()
{
- m_mltCheck.programList->setColumnCount(2);
- m_mltCheck.programList->setRootIsDecorated(false);
- m_mltCheck.programList->setHeaderHidden(true);
QSize itemSize(20, fontMetrics().height() * 2.5);
m_mltCheck.programList->setColumnWidth(0, 30);
m_mltCheck.programList->setIconSize(QSize(24, 24));
meltitem->setSizeHint(0, itemSize);
meltitem->setIcon(0, m_okIcon);
- // Check MLT's installed producers
- QProcess checkProcess;
- checkProcess.start(KdenliveSettings::rendererpath(), QStringList() << "-query" << "producer");
- if (!checkProcess.waitForStarted()) {
- meltitem->setIcon(0, m_badIcon);
- meltitem->setData(1, Qt::UserRole, i18n("Error starting MLT's command line player (melt)"));
+
+ Mlt::Repository *repository = Mlt::Factory::init();
+ if (!repository) {
+ mltitem->setData(1, Qt::UserRole, i18n("Cannot start the MLT video backend!"));
+ mltitem->setIcon(0, m_badIcon);
+ m_systemCheckIsOk = false;
button(QWizard::NextButton)->setEnabled(false);
- } else {
- checkProcess.waitForFinished();
- QByteArray result = checkProcess.readAllStandardError();
+ }
+ else {
+ int mltVersion = (mltVersionMajor << 16) + (mltVersionMinor << 8) + mltVersionRevision;
+ mltitem->setText(1, i18n("MLT version: %1", mlt_version_get_string()));
+ mltitem->setSizeHint(0, itemSize);
+ if (mlt_version_get_int() < 1792) {
+ mltitem->setData(1, Qt::UserRole, i18n("Your MLT version is unsupported!!!"));
+ mltitem->setIcon(0, m_badIcon);
+ m_systemCheckIsOk = false;
+ button(QWizard::NextButton)->setEnabled(false);
+ }
+ else if (mlt_version_get_int() < mltVersion) {
+ mltitem->setData(1, Qt::UserRole, i18n("Please upgrade to MLT %1.%2.%3", mltVersionMajor, mltVersionMinor, mltVersionRevision));
+ mltitem->setIcon(0, m_badIcon);
+ }
+ else {
+ mltitem->setData(1, Qt::UserRole, i18n("MLT video backend!"));
+ mltitem->setIcon(0, m_okIcon);
+ }
- // Check MLT avformat module
+ // Retrieve the list of available transitions.
+ Mlt::Properties *producers = repository->producers();
+ QStringList producersItemList;
+ for (int i = 0; i < producers->count(); ++i)
+ producersItemList << producers->get_name(i);
+ delete producers;
+
+ Mlt::Properties *consumers = repository->consumers();
+ QStringList consumersItemList;
+ for (int i = 0; i < consumers->count(); ++i)
+ consumersItemList << consumers->get_name(i);
+ delete consumers;
+
+ // SDL module
+ QTreeWidgetItem *sdlItem = new QTreeWidgetItem(m_mltCheck.programList, QStringList() << QString() << i18n("SDL module"));
+ sdlItem->setData(1, Qt::UserRole, i18n("Required for Kdenlive"));
+ sdlItem->setSizeHint(0, itemSize);
+
+ if (!consumersItemList.contains("sdl")) {
+ sdlItem->setIcon(0, m_badIcon);
+ m_systemCheckIsOk = false;
+ button(QWizard::NextButton)->setEnabled(false);
+ }
+ else {
+ sdlItem->setIcon(0, m_okIcon);
+ }
+
+ // AVformat module
QTreeWidgetItem *avformatItem = new QTreeWidgetItem(m_mltCheck.programList, QStringList() << QString() << i18n("Avformat module (FFmpeg)"));
avformatItem->setData(1, Qt::UserRole, i18n("Required to work with various video formats (hdv, mpeg, flash, ...)"));
avformatItem->setSizeHint(0, itemSize);
- if (!result.contains("- avformat")) {
+ Mlt::Consumer *consumer = NULL;
+ Mlt::Profile p;
+ if (consumersItemList.contains("avformat"))
+ consumer = new Mlt::Consumer(p, "avformat");
+ if (consumer == NULL || !consumer->is_valid()) {
avformatItem->setIcon(0, m_badIcon);
m_mltCheck.tabWidget->setTabEnabled(1, false);
- } else {
+ }
+ else {
avformatItem->setIcon(0, m_okIcon);
- // Make sure we have MLT > 0.3.4
- bool recentMlt = false;
- int version = 0;
- QString mltVersion;
- QString exepath = KStandardDirs::findExe("pkg-config");
- if (!exepath.isEmpty()) {
- checkProcess.start(exepath, QStringList() << "--variable=version" << "mlt++");
- if (!checkProcess.waitForStarted()) {
- kDebug() << "// Error querying MLT's version";
- } else {
- checkProcess.waitForFinished();
- mltVersion = checkProcess.readAllStandardOutput();
- version = 100 * mltVersion.section('.', 0, 0).toInt() + 10 * mltVersion.section('.', 1, 1).toInt() + mltVersion.section('.', 2, 2).toInt();
- kDebug() << "// FOUND MLT's pkgconfig version: " << version;
- if (version > 34) recentMlt = true;
- }
- }
- if (version == 0) {
- checkProcess.start(KdenliveSettings::rendererpath(), QStringList() << "--version");
- if (!checkProcess.waitForStarted()) {
- kDebug() << "// Error querying MLT's version";
- } else {
- checkProcess.waitForFinished();
- mltVersion = checkProcess.readAllStandardError();
- mltVersion = mltVersion.section('\n', 0, 0).simplified();
- mltVersion = mltVersion.section(' ', -1).simplified();
- version = 100 * mltVersion.section('.', 0, 0).toInt() + 10 * mltVersion.section('.', 1, 1).toInt() + mltVersion.section('.', 2, 2).toInt();
- kDebug() << "// FOUND MLT version: " << version;
- if (version >= 40) recentMlt = true;
- }
- }
-
- mltitem->setText(1, i18n("MLT version: %1", mltVersion.simplified()));
- mltitem->setSizeHint(0, itemSize);
- if (version < recommendedMltVersion) {
- mltitem->setData(1, Qt::UserRole, i18n("Please upgrade to the latest MLT version"));
- mltitem->setIcon(0, m_badIcon);
- } else {
- mltitem->setData(1, Qt::UserRole, i18n("MLT version is correct"));
- mltitem->setIcon(0, m_okIcon);
- }
-
- if (recentMlt) {
- // Check installed audio codecs
- QProcess checkProcess2;
- checkProcess2.start(KdenliveSettings::rendererpath(), QStringList() << "noise:" << "-consumer" << "avformat" << "acodec=list");
- if (!checkProcess2.waitForStarted()) {
- m_mltCheck.tabWidget->setTabEnabled(1, false);
- kDebug() << "// Error parsing MLT's avformat codecs";
- } else {
- checkProcess2.waitForFinished();
- QByteArray codecList = checkProcess2.readAllStandardError();
- QString acodecList(codecList);
- QStringList result;
- QStringList alist = acodecList.split('\n', QString::SkipEmptyParts);
- for (int i = 0; i < alist.count(); i++) {
- if (alist.at(i).contains("- ")) result.append(alist.at(i).section("- ", 1).simplified().toLower());
- }
- m_mltCheck.acodecs_list->addItems(result);
- KdenliveSettings::setAudiocodecs(result);
- //kDebug()<<"// FOUND LIST:\n\n"<<m_audioCodecs<<"\n\n++++++++++++++++++++";
- }
- // Check video codecs
- checkProcess2.start(KdenliveSettings::rendererpath(), QStringList() << "noise:" << "-consumer" << "avformat" << "vcodec=list");
- if (!checkProcess2.waitForStarted()) {
- kDebug() << "// Error parsing MLT's avformat codecs";
- } else {
- checkProcess2.waitForFinished();
- QByteArray codecList = checkProcess2.readAllStandardError();
- QString vcodecList(codecList);
- QStringList result;
- QStringList vlist = vcodecList.split('\n', QString::SkipEmptyParts);
- for (int i = 0; i < vlist.count(); i++) {
- if (vlist.at(i).contains("- ")) result.append(vlist.at(i).section("- ", 1).simplified().toLower());
- }
- m_mltCheck.vcodecs_list->addItems(result);
- KdenliveSettings::setVideocodecs(result);
- //kDebug()<<"// FOUND LIST:\n\n"<<m_videoCodecs<<"\n\n++++++++++++++++++++";
- }
- // Check formats
- checkProcess2.start(KdenliveSettings::rendererpath(), QStringList() << "noise:" << "-consumer" << "avformat" << "f=list");
- if (!checkProcess2.waitForStarted()) {
- kDebug() << "// Error parsing MLT's avformat codecs";
- } else {
- checkProcess2.waitForFinished();
- QByteArray codecList = checkProcess2.readAllStandardError();
- QString vcodecList(codecList);
- QStringList result;
- QStringList vlist = vcodecList.split('\n', QString::SkipEmptyParts);
- for (int i = 0; i < vlist.count(); i++) {
- if (vlist.at(i).contains("- ")) {
- QString format = vlist.at(i).section("- ", 1).simplified().toLower();
- if (format.contains(',')) {
- QStringList sub = format.split(',', QString::SkipEmptyParts);
- for (int j = 0; j < sub.count(); j++)
- result.append(sub.at(j));
- } else result.append(format);
- }
- }
- m_mltCheck.formats_list->addItems(result);
- KdenliveSettings::setSupportedformats(result);
- //kDebug()<<"// FOUND LIST:\n\n"<<m_videoCodecs<<"\n\n++++++++++++++++++++";
- }
- }
-
+ consumer->set("vcodec", "list");
+ consumer->set("acodec", "list");
+ consumer->set("f", "list");
+ consumer->start();
+ QStringList result;
+ Mlt::Properties vcodecs((mlt_properties) consumer->get_data("vcodec"));
+ for (int i = 0; i < vcodecs.count(); i++)
+ result << QString(vcodecs.get(i));
+ m_mltCheck.vcodecs_list->addItems(result);
+ KdenliveSettings::setVideocodecs(result);
+ result.clear();
+ Mlt::Properties acodecs((mlt_properties) consumer->get_data("acodec"));
+ for (int i = 0; i < acodecs.count(); i++)
+ result << QString(acodecs.get(i));
+ m_mltCheck.acodecs_list->addItems(result);
+ KdenliveSettings::setAudiocodecs(result);
+ result.clear();
+ Mlt::Properties formats((mlt_properties) consumer->get_data("f"));
+ for (int i = 0; i < formats.count(); i++)
+ result << QString(formats.get(i));
+ m_mltCheck.formats_list->addItems(result);
+ KdenliveSettings::setSupportedformats(result);
+ delete consumer;
}
- // Check MLT dv module
+ // DV module
QTreeWidgetItem *dvItem = new QTreeWidgetItem(m_mltCheck.programList, QStringList() << QString() << i18n("DV module (libdv)"));
dvItem->setData(1, Qt::UserRole, i18n("Required to work with dv files if avformat module is not installed"));
dvItem->setSizeHint(0, itemSize);
- if (!result.contains("- libdv")) {
+ if (!producersItemList.contains("libdv")) {
dvItem->setIcon(0, m_badIcon);
- } else {
+ }
+ else {
dvItem->setIcon(0, m_okIcon);
}
- // Check MLT image format module
+ // Image module
QTreeWidgetItem *imageItem = new QTreeWidgetItem(m_mltCheck.programList, QStringList() << QString() << i18n("QImage module"));
imageItem->setData(1, Qt::UserRole, i18n("Required to work with images"));
imageItem->setSizeHint(0, itemSize);
- if (!result.contains("- qimage")) {
+ if (!producersItemList.contains("qimage")) {
imageItem->setIcon(0, m_badIcon);
imageItem = new QTreeWidgetItem(m_mltCheck.programList, QStringList() << QString() << i18n("Pixbuf module"));
imageItem->setData(1, Qt::UserRole, i18n("Required to work with images"));
imageItem->setSizeHint(0, itemSize);
- if (!result.contains("- pixbuf")) imageItem->setIcon(0, m_badIcon);
- else imageItem->setIcon(0, m_okIcon);
- } else {
+ if (producersItemList.contains("pixbuf")) {
+ imageItem->setIcon(0, m_badIcon);
+ }
+ else {
+ imageItem->setIcon(0, m_okIcon);
+ }
+ }
+ else {
imageItem->setIcon(0, m_okIcon);
}
+
+ // Titler module
+ QTreeWidgetItem *titleItem = new QTreeWidgetItem(m_mltCheck.programList, QStringList() << QString() << i18n("Title module"));
+ titleItem->setData(1, Qt::UserRole, i18n("Required to work with titles"));
+ titleItem->setSizeHint(0, itemSize);
+ if (!producersItemList.contains("kdenlivetitle")) {
+ KdenliveSettings::setHastitleproducer(false);
+ titleItem->setIcon(0, m_badIcon);
+ } else {
+ titleItem->setIcon(0, m_okIcon);
+ KdenliveSettings::setHastitleproducer(true);
+ }
}
}
void Wizard::slotCheckPrograms()
{
- m_check.programList->setColumnCount(2);
- m_check.programList->setRootIsDecorated(false);
- m_check.programList->setHeaderHidden(true);
QSize itemSize(20, fontMetrics().height() * 2.5);
m_check.programList->setColumnWidth(0, 30);
m_check.programList->setIconSize(QSize(24, 24));
else if (KStandardDirs::findExe("ffplay").isEmpty()) item->setIcon(0, m_badIcon);
else item->setIcon(0, m_okIcon);
- item = new QTreeWidgetItem(m_check.programList, QStringList() << QString() << i18n("Recordmydesktop"));
+#ifndef Q_WS_MAC
+ item = new QTreeWidgetItem(m_check.programList, QStringList() << QString() << i18n("recordmydesktop"));
item->setData(1, Qt::UserRole, i18n("Required for screen capture"));
item->setSizeHint(0, itemSize);
if (KStandardDirs::findExe("recordmydesktop").isEmpty()) item->setIcon(0, m_badIcon);
else item->setIcon(0, m_okIcon);
- item = new QTreeWidgetItem(m_check.programList, QStringList() << QString() << i18n("Dvgrab"));
+ item = new QTreeWidgetItem(m_check.programList, QStringList() << QString() << i18n("dvgrab"));
item->setData(1, Qt::UserRole, i18n("Required for firewire capture"));
item->setSizeHint(0, itemSize);
if (KStandardDirs::findExe("dvgrab").isEmpty()) item->setIcon(0, m_badIcon);
else item->setIcon(0, m_okIcon);
+#endif
- item = new QTreeWidgetItem(m_check.programList, QStringList() << QString() << i18n("Dvdauthor"));
+ item = new QTreeWidgetItem(m_check.programList, QStringList() << QString() << i18n("dvdauthor"));
item->setData(1, Qt::UserRole, i18n("Required for creation of DVD"));
item->setSizeHint(0, itemSize);
if (KStandardDirs::findExe("dvdauthor").isEmpty()) item->setIcon(0, m_badIcon);
else item->setIcon(0, m_okIcon);
- item = new QTreeWidgetItem(m_check.programList, QStringList() << QString() << i18n("Mkisofs"));
+
+ item = new QTreeWidgetItem(m_check.programList, QStringList() << QString() << i18n("genisoimage or mkisofs"));
item->setData(1, Qt::UserRole, i18n("Required for creation of DVD ISO images"));
item->setSizeHint(0, itemSize);
- if (KStandardDirs::findExe("mkisofs").isEmpty()) item->setIcon(0, m_badIcon);
+ if (KStandardDirs::findExe("genisoimage").isEmpty()) {
+ // no GenIso, check for mkisofs
+ if (!KStandardDirs::findExe("mkisofs").isEmpty()) {
+ item->setIcon(0, m_okIcon);
+ } else item->setIcon(0, m_badIcon);
+ } else item->setIcon(0, m_okIcon);
+
+ item = new QTreeWidgetItem(m_check.programList, QStringList() << QString() << i18n("xine"));
+ item->setData(1, Qt::UserRole, i18n("Required to preview your DVD"));
+ item->setSizeHint(0, itemSize);
+ if (KStandardDirs::findExe("xine").isEmpty()) item->setIcon(0, m_badIcon);
else item->setIcon(0, m_okIcon);
+ // set up some default applications
+ QString program;
+ if (KdenliveSettings::defaultimageapp().isEmpty()) {
+ program = KStandardDirs::findExe("gimp");
+ if (program.isEmpty()) program = KStandardDirs::findExe("krita");
+ if (!program.isEmpty()) KdenliveSettings::setDefaultimageapp(program);
+ }
+ if (KdenliveSettings::defaultaudioapp().isEmpty()) {
+ program = KStandardDirs::findExe("audacity");
+ if (program.isEmpty()) program = KStandardDirs::findExe("traverso");
+ if (!program.isEmpty()) KdenliveSettings::setDefaultaudioapp(program);
+ }
+ if (KdenliveSettings::defaultplayerapp().isEmpty()) {
+ KService::Ptr offer = KMimeTypeTrader::self()->preferredService("video/mpeg");
+ if (offer)
+ KdenliveSettings::setDefaultplayerapp(KRun::binaryName(offer->exec(), true));
+ }
}
void Wizard::installExtraMimes(QString baseName, QStringList globs)
} else {
QStringList extensions = mime->patterns();
QString comment = mime->comment();
- foreach(const QString &glob, globs) {
+ foreach(const QString & glob, globs) {
if (!extensions.contains(glob)) extensions << glob;
}
kDebug() << "EXTS: " << extensions;
writer.writeEndElement(); // comment
}
- foreach(const QString& pattern, extensions) {
+ foreach(const QString & pattern, extensions) {
writer.writeStartElement(nsUri, "glob");
writer.writeAttribute("pattern", pattern);
writer.writeEndElement(); // glob
KdenliveSettings::setDefault_profile(selectedProfile);
}
QString path = m_extra.projectfolder->url().path();
- if (KStandardDirs::makeDir(path) == false) kDebug() << "/// ERROR CREATING PROJECT FOLDER: " << path;
- KdenliveSettings::setDefaultprojectfolder(path);
+ if (KStandardDirs::makeDir(path) == false) {
+ kDebug() << "/// ERROR CREATING PROJECT FOLDER: " << path;
+ } else KdenliveSettings::setDefaultprojectfolder(path);
}
if (KdenliveSettings::rendererpath().isEmpty()) {
errorMessage.append(i18n("Your MLT installation cannot be found. Install MLT and restart Kdenlive.\n"));
}
- /*QProcess checkProcess;
- checkProcess.start(KdenliveSettings::rendererpath(), QStringList() << "-query" << "producer");
- if (!checkProcess.waitForStarted())
- errorMessage.append(i18n("Error starting MLT's command line player (melt)") + ".\n");
-
- checkProcess.waitForFinished();
-
- QByteArray result = checkProcess.readAllStandardError();
- if (!result.contains("- avformat")) errorMessage.append(i18n("MLT's avformat (FFMPEG) module not found. Please check your FFMPEG and MLT install. Kdenlive will not work until this issue is fixed.") + "\n");*/
-
- QProcess checkProcess2;
- checkProcess2.start(KdenliveSettings::rendererpath(), QStringList() << "-query" << "consumer");
- if (!checkProcess2.waitForStarted())
- errorMessage.append(i18n("Error starting MLT's command line player (melt).") + '\n');
-
- checkProcess2.waitForFinished();
-
- QByteArray result = checkProcess2.readAllStandardError();
- if (!result.contains("sdl") || !result.contains("sdl_preview")) errorMessage.append(i18n("MLT's SDL module not found. Please check your MLT install. Kdenlive will not work until this issue is fixed.") + '\n');
if (!errorMessage.isEmpty()) {
- errorMessage.prepend(QString("<b>%1</b><br>").arg(i18n("Fatal Error")));
+ errorMessage.prepend(QString("<b>%1</b><br />").arg(i18n("Fatal Error")));
QLabel *pix = new QLabel();
pix->setPixmap(KIcon("dialog-error").pixmap(30));
QLabel *label = new QLabel(errorMessage);
return m_systemCheckIsOk;
}
+void Wizard::slotShowWebInfos()
+{
+ KRun::runUrl(KUrl("http://kdenlive.org/discover/" + QString(kdenlive_version).section(' ', 0, 0)), "text/html", this);
+}
+
+void Wizard::slotSaveCaptureFormat()
+{
+ QStringList format = m_capture.v4l_formats->itemData(m_capture.v4l_formats->currentIndex()).toStringList();
+ if (format.isEmpty()) return;
+ MltVideoProfile profile;
+ profile.description = "Video4Linux capture";
+ profile.colorspace = 601;
+ profile.width = format.at(1).toInt();
+ profile.height = format.at(2).toInt();
+ profile.sample_aspect_num = 1;
+ profile.sample_aspect_den = 1;
+ profile.display_aspect_num = format.at(1).toInt();
+ profile.display_aspect_den = format.at(2).toInt();
+ profile.frame_rate_num = format.at(3).toInt();
+ profile.frame_rate_den = format.at(4).toInt();
+ profile.progressive = 1;
+ QString vl4ProfilePath = KStandardDirs::locateLocal("appdata", "profiles/video4linux");
+ ProfilesDialog::saveProfile(profile, vl4ProfilePath);
+}
+
#include "wizard.moc"