#include "wizard.h"
#include "kdenlivesettings.h"
#include "profilesdialog.h"
+#include "kdenlive-config.h"
#include <KStandardDirs>
#include <KLocale>
#include <KProcess>
#include <kmimetype.h>
+#include <KRun>
+#include <KService>
+#include <KMimeTypeTrader>
#include <QLabel>
#include <QFile>
#include <QXmlStreamWriter>
#include <QTimer>
-const double recommendedMltVersion = 36;
+const double recommendedMltVersion = 50;
+static const char kdenlive_version[] = VERSION;
-Wizard::Wizard(bool upgrade, QWidget *parent): QWizard(parent)
+Wizard::Wizard(bool upgrade, QWidget *parent) :
+ QWizard(parent)
{
+ setWindowTitle(i18n("Config Wizard"));
setPixmap(QWizard::WatermarkPixmap, QPixmap(KStandardDirs::locate("appdata", "banner.png")));
QWizardPage *page1 = new QWizardPage;
page1->setTitle(i18n("Welcome"));
QLabel *label;
if (upgrade)
- label = new QLabel(i18n("Your Kdenlive version was upgraded. Please take some time to review the basic settings"));
+ label = new QLabel(i18n("Your Kdenlive version was upgraded to version %1. Please take some time to review the basic settings", QString(kdenlive_version).section(' ', 0, 0)));
else
label = new QLabel(i18n("This is the first time you run Kdenlive. This wizard will let you adjust some basic settings, you will be ready to edit your first movie in a few seconds..."));
label->setWordWrap(true);
m_startLayout = new QVBoxLayout;
m_startLayout->addWidget(label);
+ QPushButton *but = new QPushButton(KIcon("help-about"), i18n("Discover the features of this Kdenlive release"), this);
+ connect(but, SIGNAL(clicked()), this, SLOT(slotShowWebInfos()));
+ m_startLayout->addStretch();
+ m_startLayout->addWidget(but);
+
+
page1->setLayout(m_startLayout);
addPage(page1);
m_badIcon = KIcon("dialog-close");
// build profiles lists
- m_profilesInfo = ProfilesDialog::getProfilesInfo();
- QMap<QString, QString>::const_iterator i = m_profilesInfo.constBegin();
- while (i != m_profilesInfo.constEnd()) {
+ QMap<QString, QString> profilesInfo = ProfilesDialog::getProfilesInfo();
+ QMap<QString, QString>::const_iterator i = profilesInfo.constBegin();
+ while (i != profilesInfo.constEnd()) {
QMap< QString, QString > profileData = ProfilesDialog::getSettingsFromFile(i.value());
- if (profileData.value("width") == "720") m_dvProfiles.append(i.key());
- else if (profileData.value("width").toInt() >= 1080) m_hdvProfiles.append(i.key());
- else m_otherProfiles.append(i.key());
+ if (profileData.value("width") == "720") m_dvProfiles.insert(i.key(), i.value());
+ else if (profileData.value("width").toInt() >= 1080) m_hdvProfiles.insert(i.key(), i.value());
+ else m_otherProfiles.insert(i.key(), i.value());
++i;
}
+ m_standard.button_all->setChecked(true);
connect(m_standard.button_all, SIGNAL(toggled(bool)), this, SLOT(slotCheckStandard()));
connect(m_standard.button_hdv, SIGNAL(toggled(bool)), this, SLOT(slotCheckStandard()));
connect(m_standard.button_dv, SIGNAL(toggled(bool)), this, SLOT(slotCheckStandard()));
- m_standard.button_all->setChecked(true);
+ slotCheckStandard();
connect(m_standard.profiles_list, SIGNAL(itemSelectionChanged()), this, SLOT(slotCheckSelectedItem()));
// select default profile
- QList<QListWidgetItem *> profiles = m_standard.profiles_list->findItems(ProfilesDialog::getProfileDescription(KdenliveSettings::default_profile()), Qt::MatchExactly);
- if (profiles.count() > 0) m_standard.profiles_list->setCurrentItem(profiles.at(0));
+ if (!KdenliveSettings::default_profile().isEmpty()) {
+ for (int i = 0; i < m_standard.profiles_list->count(); i++) {
+ if (m_standard.profiles_list->item(i)->data(Qt::UserRole).toString() == KdenliveSettings::default_profile()) {
+ m_standard.profiles_list->setCurrentRow(i);
+ m_standard.profiles_list->scrollToItem(m_standard.profiles_list->currentItem());
+ break;
+ }
+ }
+ }
+
addPage(page2);
QWizardPage *page3 = new QWizardPage;
page3->setTitle(i18n("Additional Settings"));
m_extra.setupUi(page3);
m_extra.projectfolder->setMode(KFile::Directory);
- m_extra.projectfolder->setPath(QDir::homePath() + "/kdenlive");
+ m_extra.projectfolder->setUrl(KUrl(KdenliveSettings::defaultprojectfolder()));
m_extra.videothumbs->setChecked(KdenliveSettings::videothumbnails());
m_extra.audiothumbs->setChecked(KdenliveSettings::audiothumbnails());
m_extra.autosave->setChecked(KdenliveSettings::crashrecovery());
void Wizard::checkMltComponents()
{
- m_mltCheck.programList->setColumnCount(2);
- m_mltCheck.programList->setRootIsDecorated(false);
- m_mltCheck.programList->setHeaderHidden(true);
QSize itemSize(20, fontMetrics().height() * 2.5);
m_mltCheck.programList->setColumnWidth(0, 30);
m_mltCheck.programList->setIconSize(QSize(24, 24));
QTreeWidgetItem *mltitem = new QTreeWidgetItem(m_mltCheck.programList);
- QTreeWidgetItem *inigoitem = new QTreeWidgetItem(m_mltCheck.programList, QStringList() << QString() << i18n("Inigo") + " (" + KdenliveSettings::rendererpath() + ')');
- inigoitem->setData(1, Qt::UserRole, i18n("Required for rendering (part of MLT package)"));
- inigoitem->setSizeHint(0, itemSize);
- inigoitem->setIcon(0, m_okIcon);
+ QTreeWidgetItem *meltitem = new QTreeWidgetItem(m_mltCheck.programList, QStringList() << QString() << i18n("Melt") + " (" + KdenliveSettings::rendererpath() + ')');
+ meltitem->setData(1, Qt::UserRole, i18n("Required for rendering (part of MLT package)"));
+ meltitem->setSizeHint(0, itemSize);
+ meltitem->setIcon(0, m_okIcon);
// Check MLT's installed producers
QProcess checkProcess;
checkProcess.start(KdenliveSettings::rendererpath(), QStringList() << "-query" << "producer");
if (!checkProcess.waitForStarted()) {
- inigoitem->setIcon(0, m_badIcon);
- inigoitem->setData(1, Qt::UserRole, i18n("Error starting MLT's command line player (inigo)"));
+ meltitem->setIcon(0, m_badIcon);
+ meltitem->setData(1, Qt::UserRole, i18n("Error starting MLT's command line player (melt)"));
button(QWizard::NextButton)->setEnabled(false);
} else {
checkProcess.waitForFinished();
} else {
avformatItem->setIcon(0, m_okIcon);
// Make sure we have MLT > 0.3.4
- bool recentMlt = false;
int version = 0;
QString mltVersion;
QString exepath = KStandardDirs::findExe("pkg-config");
if (!exepath.isEmpty()) {
- checkProcess.start(exepath, QStringList() << "--variable=version" << "mlt-framework");
+ checkProcess.start(exepath, QStringList() << "--variable=version" << "mlt++");
if (!checkProcess.waitForStarted()) {
kDebug() << "// Error querying MLT's version";
} else {
mltVersion = checkProcess.readAllStandardOutput();
version = 100 * mltVersion.section('.', 0, 0).toInt() + 10 * mltVersion.section('.', 1, 1).toInt() + mltVersion.section('.', 2, 2).toInt();
kDebug() << "// FOUND MLT's pkgconfig version: " << version;
- if (version > 34) recentMlt = true;
}
}
if (version == 0) {
mltVersion = mltVersion.section(' ', -1).simplified();
version = 100 * mltVersion.section('.', 0, 0).toInt() + 10 * mltVersion.section('.', 1, 1).toInt() + mltVersion.section('.', 2, 2).toInt();
kDebug() << "// FOUND MLT version: " << version;
- if (version > 34) recentMlt = true;
}
}
mltitem->setText(1, i18n("MLT version: %1", mltVersion.simplified()));
mltitem->setSizeHint(0, itemSize);
- if (version < recommendedMltVersion) {
- mltitem->setData(1, Qt::UserRole, i18n("Please upgrade to the latest MLT version"));
+ if (version < 40) {
+ mltitem->setData(1, Qt::UserRole, i18n("Your MLT version is unsupported!!!"));
mltitem->setIcon(0, m_badIcon);
} else {
- mltitem->setData(1, Qt::UserRole, i18n("MLT version is correct"));
- mltitem->setIcon(0, m_okIcon);
- }
-
- if (recentMlt) {
+ if (version < recommendedMltVersion) {
+ mltitem->setData(1, Qt::UserRole, i18n("Please upgrade to the latest MLT version"));
+ mltitem->setIcon(0, m_badIcon);
+ } else {
+ mltitem->setData(1, Qt::UserRole, i18n("MLT version is correct"));
+ mltitem->setIcon(0, m_okIcon);
+ }
// Check installed audio codecs
QProcess checkProcess2;
checkProcess2.start(KdenliveSettings::rendererpath(), QStringList() << "noise:" << "-consumer" << "avformat" << "acodec=list");
} else {
imageItem->setIcon(0, m_okIcon);
}
+
+ // Check MLT title module
+ QTreeWidgetItem *titleItem = new QTreeWidgetItem(m_mltCheck.programList, QStringList() << QString() << i18n("Title module"));
+ titleItem->setData(1, Qt::UserRole, i18n("Required to work with titles"));
+ titleItem->setSizeHint(0, itemSize);
+ if (!result.contains("- kdenlivetitle")) {
+ KdenliveSettings::setHastitleproducer(false);
+ titleItem->setIcon(0, m_badIcon);
+ } else {
+ titleItem->setIcon(0, m_okIcon);
+ KdenliveSettings::setHastitleproducer(true);
+ }
}
}
void Wizard::slotCheckPrograms()
{
- m_check.programList->setColumnCount(2);
- m_check.programList->setRootIsDecorated(false);
- m_check.programList->setHeaderHidden(true);
QSize itemSize(20, fontMetrics().height() * 2.5);
m_check.programList->setColumnWidth(0, 30);
m_check.programList->setIconSize(QSize(24, 24));
else if (KStandardDirs::findExe("ffplay").isEmpty()) item->setIcon(0, m_badIcon);
else item->setIcon(0, m_okIcon);
- item = new QTreeWidgetItem(m_check.programList, QStringList() << QString() << i18n("Recordmydesktop"));
+#ifndef Q_WS_MAC
+ item = new QTreeWidgetItem(m_check.programList, QStringList() << QString() << i18n("recordmydesktop"));
item->setData(1, Qt::UserRole, i18n("Required for screen capture"));
item->setSizeHint(0, itemSize);
if (KStandardDirs::findExe("recordmydesktop").isEmpty()) item->setIcon(0, m_badIcon);
else item->setIcon(0, m_okIcon);
- item = new QTreeWidgetItem(m_check.programList, QStringList() << QString() << i18n("Dvgrab"));
+ item = new QTreeWidgetItem(m_check.programList, QStringList() << QString() << i18n("dvgrab"));
item->setData(1, Qt::UserRole, i18n("Required for firewire capture"));
item->setSizeHint(0, itemSize);
if (KStandardDirs::findExe("dvgrab").isEmpty()) item->setIcon(0, m_badIcon);
else item->setIcon(0, m_okIcon);
+#endif
- item = new QTreeWidgetItem(m_check.programList, QStringList() << QString() << i18n("Dvdauthor"));
+ item = new QTreeWidgetItem(m_check.programList, QStringList() << QString() << i18n("dvdauthor"));
item->setData(1, Qt::UserRole, i18n("Required for creation of DVD"));
item->setSizeHint(0, itemSize);
if (KStandardDirs::findExe("dvdauthor").isEmpty()) item->setIcon(0, m_badIcon);
else item->setIcon(0, m_okIcon);
- item = new QTreeWidgetItem(m_check.programList, QStringList() << QString() << i18n("Mkisofs"));
+
+ item = new QTreeWidgetItem(m_check.programList, QStringList() << QString() << i18n("genisoimage or mkisofs"));
item->setData(1, Qt::UserRole, i18n("Required for creation of DVD ISO images"));
item->setSizeHint(0, itemSize);
- if (KStandardDirs::findExe("mkisofs").isEmpty()) item->setIcon(0, m_badIcon);
- else item->setIcon(0, m_okIcon);
-
+ if (KStandardDirs::findExe("genisoimage").isEmpty()) {
+ // no GenIso, check for mkisofs
+ if (!KStandardDirs::findExe("mkisofs").isEmpty()) {
+ item->setIcon(0, m_okIcon);
+ } else item->setIcon(0, m_badIcon);
+ } else item->setIcon(0, m_okIcon);
+
+ // set up some default applications
+ QString program;
+ if (KdenliveSettings::defaultimageapp().isEmpty()) {
+ program = KStandardDirs::findExe("gimp");
+ if (program.isEmpty()) program = KStandardDirs::findExe("krita");
+ if (!program.isEmpty()) KdenliveSettings::setDefaultimageapp(program);
+ }
+ if (KdenliveSettings::defaultaudioapp().isEmpty()) {
+ program = KStandardDirs::findExe("audacity");
+ if (program.isEmpty()) program = KStandardDirs::findExe("traverso");
+ if (!program.isEmpty()) KdenliveSettings::setDefaultaudioapp(program);
+ }
+ if (KdenliveSettings::defaultplayerapp().isEmpty()) {
+ KService::Ptr offer = KMimeTypeTrader::self()->preferredService("video/mpeg");
+ if (offer)
+ KdenliveSettings::setDefaultplayerapp(KRun::binaryName(offer->exec(), true));
+ }
}
void Wizard::installExtraMimes(QString baseName, QStringList globs)
{
m_standard.profiles_list->clear();
QStringList profiles;
- if (m_standard.button_dv->isChecked()) {
+ if (!m_standard.button_hdv->isChecked()) {
// DV standard
- m_standard.profiles_list->addItems(m_dvProfiles);
- } else if (m_standard.button_hdv->isChecked()) {
+ QMapIterator<QString, QString> i(m_dvProfiles);
+ while (i.hasNext()) {
+ i.next();
+ QListWidgetItem *item = new QListWidgetItem(i.key(), m_standard.profiles_list);
+ item->setData(Qt::UserRole, i.value());
+ }
+ }
+ if (!m_standard.button_dv->isChecked()) {
// HDV standard
- m_standard.profiles_list->addItems(m_hdvProfiles);
- } else {
- m_standard.profiles_list->addItems(m_dvProfiles);
- m_standard.profiles_list->addItems(m_hdvProfiles);
- m_standard.profiles_list->addItems(m_otherProfiles);
+ QMapIterator<QString, QString> i(m_hdvProfiles);
+ while (i.hasNext()) {
+ i.next();
+ QListWidgetItem *item = new QListWidgetItem(i.key(), m_standard.profiles_list);
+ item->setData(Qt::UserRole, i.value());
+ }
+ }
+ if (m_standard.button_all->isChecked()) {
+ QMapIterator<QString, QString> i(m_otherProfiles);
+ while (i.hasNext()) {
+ i.next();
+ QListWidgetItem *item = new QListWidgetItem(i.key(), m_standard.profiles_list);
+ item->setData(Qt::UserRole, i.value());
+ }
//m_standard.profiles_list->sortItems();
}
for (int i = 0; i < m_standard.profiles_list->count(); i++) {
QListWidgetItem *item = m_standard.profiles_list->item(i);
- MltVideoProfile prof = ProfilesDialog::getVideoProfile(m_profilesInfo.value(item->text()));
- const QString infoString = ("<strong>" + i18n("Frame size:") + " </strong>%1x%2<br /><strong>" + i18n("Frame rate:") + " </strong>%3/%4<br /><strong>" + i18n("Pixel aspect ratio:") + "</strong>%5/%6<br /><strong>" + i18n("Display aspect ratio:") + " </strong>%7/%8").arg(QString::number(prof.width), QString::number(prof.height), QString::number(prof.frame_rate_num), QString::number(prof.frame_rate_den), QString::number(prof.sample_aspect_num), QString::number(prof.sample_aspect_den), QString::number(prof.display_aspect_num), QString::number(prof.display_aspect_den));
+
+ QMap< QString, QString > values = ProfilesDialog::getSettingsFromFile(item->data(Qt::UserRole).toString());
+ const QString infoString = ("<strong>" + i18n("Frame size:") + " </strong>%1x%2<br /><strong>" + i18n("Frame rate:") + " </strong>%3/%4<br /><strong>" + i18n("Pixel aspect ratio:") + "</strong>%5/%6<br /><strong>" + i18n("Display aspect ratio:") + " </strong>%7/%8").arg(values.value("width"), values.value("height"), values.value("frame_rate_num"), values.value("frame_rate_den"), values.value("sample_aspect_num"), values.value("sample_aspect_den"), values.value("display_aspect_num"), values.value("display_aspect_den"));
item->setToolTip(infoString);
}
{
if (m_extra.installmimes->isChecked()) {
QStringList globs;
- globs << "*.mts" << "*.m2t" << "*.mod" << "*.ts";
+ globs << "*.mts" << "*.m2t" << "*.mod" << "*.ts" << "*.m2ts";
installExtraMimes("video/mpeg", globs);
globs.clear();
globs << "*.dv";
KdenliveSettings::setVideothumbnails(m_extra.videothumbs->isChecked());
KdenliveSettings::setCrashrecovery(m_extra.autosave->isChecked());
if (m_standard.profiles_list->currentItem()) {
- QString selectedProfile = m_profilesInfo.value(m_standard.profiles_list->currentItem()->text());
+ QString selectedProfile = m_standard.profiles_list->currentItem()->data(Qt::UserRole).toString();
if (selectedProfile.isEmpty()) selectedProfile = "dv_pal";
KdenliveSettings::setDefault_profile(selectedProfile);
}
QString path = m_extra.projectfolder->url().path();
- if (KStandardDirs::makeDir(path) == false) kDebug() << "/// ERROR CREATING PROJECT FOLDER: " << path;
- KdenliveSettings::setDefaultprojectfolder(path);
+ if (KStandardDirs::makeDir(path) == false) {
+ kDebug() << "/// ERROR CREATING PROJECT FOLDER: " << path;
+ } else KdenliveSettings::setDefaultprojectfolder(path);
}
{
QString errorMessage;
if (KdenliveSettings::rendererpath().isEmpty()) {
- errorMessage.append(i18n("your MLT installation cannot be found. Install MLT and restart Kdenlive.\n"));
+ errorMessage.append(i18n("Your MLT installation cannot be found. Install MLT and restart Kdenlive.\n"));
}
/*QProcess checkProcess;
checkProcess.start(KdenliveSettings::rendererpath(), QStringList() << "-query" << "producer");
if (!checkProcess.waitForStarted())
- errorMessage.append(i18n("Error starting MLT's command line player (inigo)") + ".\n");
+ errorMessage.append(i18n("Error starting MLT's command line player (melt)") + ".\n");
checkProcess.waitForFinished();
QProcess checkProcess2;
checkProcess2.start(KdenliveSettings::rendererpath(), QStringList() << "-query" << "consumer");
if (!checkProcess2.waitForStarted())
- errorMessage.append(i18n("Error starting MLT's command line player (inigo).") + '\n');
+ errorMessage.append(i18n("Error starting MLT's command line player (melt).") + '\n');
checkProcess2.waitForFinished();
if (!result.contains("sdl") || !result.contains("sdl_preview")) errorMessage.append(i18n("MLT's SDL module not found. Please check your MLT install. Kdenlive will not work until this issue is fixed.") + '\n');
if (!errorMessage.isEmpty()) {
- errorMessage.prepend(QString("<b>%1</b><br>").arg(i18n("Fatal Error")));
+ errorMessage.prepend(QString("<b>%1</b><br />").arg(i18n("Fatal Error")));
QLabel *pix = new QLabel();
pix->setPixmap(KIcon("dialog-error").pixmap(30));
QLabel *label = new QLabel(errorMessage);
return m_systemCheckIsOk;
}
+void Wizard::slotShowWebInfos()
+{
+ KRun::runUrl(KUrl("http://kdenlive.org/discover/" + QString(kdenlive_version).section(' ', 0, 0)), "text/html", this);
+}
+
#include "wizard.moc"
projects / kdenlive / blobdiff