#include "wizard.h"
#include "kdenlivesettings.h"
#include "profilesdialog.h"
+#include "v4l/v4lcapture.h"
#include "kdenlive-config.h"
#include <KStandardDirs>
#include <QXmlStreamWriter>
#include <QTimer>
-const double recommendedMltVersion = 45;
-static const char version[] = VERSION;
+const double recommendedMltVersion = 510;
+static const char kdenlive_version[] = VERSION;
Wizard::Wizard(bool upgrade, QWidget *parent) :
- QWizard(parent)
+ QWizard(parent)
{
setWindowTitle(i18n("Config Wizard"));
setPixmap(QWizard::WatermarkPixmap, QPixmap(KStandardDirs::locate("appdata", "banner.png")));
page1->setTitle(i18n("Welcome"));
QLabel *label;
if (upgrade)
- label = new QLabel(i18n("Your Kdenlive version was upgraded to version %1. Please take some time to review the basic settings", QString(version).section(' ', 0, 0)));
+ label = new QLabel(i18n("Your Kdenlive version was upgraded to version %1. Please take some time to review the basic settings", QString(kdenlive_version).section(' ', 0, 0)));
else
label = new QLabel(i18n("This is the first time you run Kdenlive. This wizard will let you adjust some basic settings, you will be ready to edit your first movie in a few seconds..."));
label->setWordWrap(true);
slotCheckThumbs();
addPage(page3);
+#ifndef Q_WS_MAC
+ QWizardPage *page6 = new QWizardPage;
+ page6->setTitle(i18n("Webcam"));
+ m_capture.setupUi(page6);
+ connect(m_capture.button_reload, SIGNAL(clicked()), this, SLOT(slotDetectWebcam()));
+ connect(m_capture.v4l_devices, SIGNAL(currentIndexChanged(int)), this, SLOT(slotUpdateCaptureParameters()));
+ connect(m_capture.v4l_formats, SIGNAL(currentIndexChanged(int)), this, SLOT(slotSaveCaptureFormat()));
+ m_capture.button_reload->setIcon(KIcon("view-refresh"));
+
+ addPage(page6);
+#endif
QWizardPage *page5 = new QWizardPage;
page5->setTitle(i18n("Checking system"));
listViewDelegate = new WizardDelegate(m_check.programList);
m_check.programList->setItemDelegate(listViewDelegate);
-
+ slotDetectWebcam();
QTimer::singleShot(500, this, SLOT(slotCheckMlt()));
}
+void Wizard::slotDetectWebcam()
+{
+#if !defined(Q_WS_MAC) && !defined(Q_OS_FREEBSD)
+ m_capture.v4l_devices->blockSignals(true);
+ m_capture.v4l_devices->clear();
+
+ // Video 4 Linux device detection
+ for (int i = 0; i < 10; i++) {
+ QString path = "/dev/video" + QString::number(i);
+ if (QFile::exists(path)) {
+ QStringList deviceInfo = V4lCaptureHandler::getDeviceName(path.toUtf8().constData());
+ if (!deviceInfo.isEmpty()) {
+ m_capture.v4l_devices->addItem(deviceInfo.at(0), path);
+ m_capture.v4l_devices->setItemData(m_capture.v4l_devices->count() - 1, deviceInfo.at(1), Qt::UserRole + 1);
+ }
+ }
+ }
+ if (m_capture.v4l_devices->count() > 0) {
+ m_capture.v4l_status->setText(i18n("Select your default video4linux device"));
+ // select default device
+ bool found = false;
+ for (int i = 0; i < m_capture.v4l_devices->count(); i++) {
+ QString device = m_capture.v4l_devices->itemData(i).toString();
+ if (device == KdenliveSettings::video4vdevice()) {
+ m_capture.v4l_devices->setCurrentIndex(i);
+ found = true;
+ break;
+ }
+ }
+ slotUpdateCaptureParameters();
+ if (!found) m_capture.v4l_devices->setCurrentIndex(0);
+ } else m_capture.v4l_status->setText(i18n("No device found, plug your webcam and refresh."));
+ m_capture.v4l_devices->blockSignals(false);
+#endif
+}
+
+void Wizard::slotUpdateCaptureParameters()
+{
+ QString device = m_capture.v4l_devices->itemData(m_capture.v4l_devices->currentIndex()).toString();
+ if (!device.isEmpty()) KdenliveSettings::setVideo4vdevice(device);
+
+ QString formats = m_capture.v4l_devices->itemData(m_capture.v4l_devices->currentIndex(), Qt::UserRole + 1).toString();
+
+ m_capture.v4l_formats->blockSignals(true);
+ m_capture.v4l_formats->clear();
+
+ QString vl4ProfilePath = KStandardDirs::locateLocal("appdata", "profiles/video4linux");
+ if (QFile::exists(vl4ProfilePath)) {
+ MltVideoProfile profileInfo = ProfilesDialog::getVideoProfile(vl4ProfilePath);
+ m_capture.v4l_formats->addItem(i18n("Current settings (%1x%2, %3/%4fps)", profileInfo.width, profileInfo.height, profileInfo.frame_rate_num, profileInfo.frame_rate_den), QStringList() << QString("unknown") <<QString::number(profileInfo.width)<<QString::number(profileInfo.height)<<QString::number(profileInfo.frame_rate_num)<<QString::number(profileInfo.frame_rate_den));
+ }
+ QStringList pixelformats = formats.split(">", QString::SkipEmptyParts);
+ QString itemSize;
+ QString pixelFormat;
+ QStringList itemRates;
+ for (int i = 0; i < pixelformats.count(); i++) {
+ QString format = pixelformats.at(i).section(':', 0, 0);
+ QStringList sizes = pixelformats.at(i).split(":", QString::SkipEmptyParts);
+ pixelFormat = sizes.takeFirst();
+ for (int j = 0; j < sizes.count(); j++) {
+ itemSize = sizes.at(j).section("=", 0, 0);
+ itemRates = sizes.at(j).section("=", 1, 1).split(",", QString::SkipEmptyParts);
+ for (int k = 0; k < itemRates.count(); k++) {
+ m_capture.v4l_formats->addItem("[" + format + "] " + itemSize + " (" + itemRates.at(k) + ")", QStringList() << format << itemSize.section('x', 0, 0) << itemSize.section('x', 1, 1) << itemRates.at(k).section('/', 0, 0) << itemRates.at(k).section('/', 1, 1));
+ }
+ }
+ }
+ if (!QFile::exists(vl4ProfilePath)) {
+ if (m_capture.v4l_formats->count() > 9) slotSaveCaptureFormat();
+ else {
+ // No existing profile and no autodetected profiles
+ MltVideoProfile profileInfo;
+ profileInfo.width = 320;
+ profileInfo.height = 200;
+ profileInfo.frame_rate_num = 15;
+ profileInfo.frame_rate_den = 1;
+ profileInfo.display_aspect_num = 4;
+ profileInfo.display_aspect_den = 3;
+ profileInfo.sample_aspect_num = 1;
+ profileInfo.sample_aspect_den = 1;
+ profileInfo.progressive = 1;
+ profileInfo.colorspace = 601;
+ ProfilesDialog::saveProfile(profileInfo, vl4ProfilePath);
+ m_capture.v4l_formats->addItem(i18n("Default settings (%1x%2, %3/%4fps)", profileInfo.width, profileInfo.height, profileInfo.frame_rate_num, profileInfo.frame_rate_den), QStringList() << QString("unknown") <<QString::number(profileInfo.width)<<QString::number(profileInfo.height)<<QString::number(profileInfo.frame_rate_num)<<QString::number(profileInfo.frame_rate_den));
+ }
+ }
+ m_capture.v4l_formats->blockSignals(false);
+}
void Wizard::checkMltComponents()
{
} else {
checkProcess.waitForFinished();
mltVersion = checkProcess.readAllStandardOutput();
- version = 100 * mltVersion.section('.', 0, 0).toInt() + 10 * mltVersion.section('.', 1, 1).toInt() + mltVersion.section('.', 2, 2).toInt();
+ version = 1000 * mltVersion.section('.', 0, 0).toInt() + 100 * mltVersion.section('.', 1, 1).toInt() + mltVersion.section('.', 2, 2).toInt();
kDebug() << "// FOUND MLT's pkgconfig version: " << version;
}
}
mltVersion = checkProcess.readAllStandardError();
mltVersion = mltVersion.section('\n', 0, 0).simplified();
mltVersion = mltVersion.section(' ', -1).simplified();
- version = 100 * mltVersion.section('.', 0, 0).toInt() + 10 * mltVersion.section('.', 1, 1).toInt() + mltVersion.section('.', 2, 2).toInt();
+ version = 1000 * mltVersion.section('.', 0, 0).toInt() + 100 * mltVersion.section('.', 1, 1).toInt() + mltVersion.section('.', 2, 2).toInt();
kDebug() << "// FOUND MLT version: " << version;
}
}
mltitem->setText(1, i18n("MLT version: %1", mltVersion.simplified()));
mltitem->setSizeHint(0, itemSize);
- if (version < 40) {
+ if (version < 506) {
mltitem->setData(1, Qt::UserRole, i18n("Your MLT version is unsupported!!!"));
mltitem->setIcon(0, m_badIcon);
} else {
} else {
imageItem->setIcon(0, m_okIcon);
}
+
+ // Check MLT title module
+ QTreeWidgetItem *titleItem = new QTreeWidgetItem(m_mltCheck.programList, QStringList() << QString() << i18n("Title module"));
+ titleItem->setData(1, Qt::UserRole, i18n("Required to work with titles"));
+ titleItem->setSizeHint(0, itemSize);
+ if (!result.contains("- kdenlivetitle")) {
+ KdenliveSettings::setHastitleproducer(false);
+ titleItem->setIcon(0, m_badIcon);
+ } else {
+ titleItem->setIcon(0, m_okIcon);
+ KdenliveSettings::setHastitleproducer(true);
+ }
}
}
item->setIcon(0, m_okIcon);
} else item->setIcon(0, m_badIcon);
} else item->setIcon(0, m_okIcon);
-
+
+ item = new QTreeWidgetItem(m_check.programList, QStringList() << QString() << i18n("xine"));
+ item->setData(1, Qt::UserRole, i18n("Required to preview your DVD"));
+ item->setSizeHint(0, itemSize);
+ if (KStandardDirs::findExe("xine").isEmpty()) item->setIcon(0, m_badIcon);
+ else item->setIcon(0, m_okIcon);
+
// set up some default applications
QString program;
if (KdenliveSettings::defaultimageapp().isEmpty()) {
} else {
QStringList extensions = mime->patterns();
QString comment = mime->comment();
- foreach(const QString &glob, globs) {
+ foreach(const QString & glob, globs) {
if (!extensions.contains(glob)) extensions << glob;
}
kDebug() << "EXTS: " << extensions;
writer.writeEndElement(); // comment
}
- foreach(const QString& pattern, extensions) {
+ foreach(const QString & pattern, extensions) {
writer.writeStartElement(nsUri, "glob");
writer.writeAttribute("pattern", pattern);
writer.writeEndElement(); // glob
if (!result.contains("sdl") || !result.contains("sdl_preview")) errorMessage.append(i18n("MLT's SDL module not found. Please check your MLT install. Kdenlive will not work until this issue is fixed.") + '\n');
if (!errorMessage.isEmpty()) {
- errorMessage.prepend(QString("<b>%1</b><br>").arg(i18n("Fatal Error")));
+ errorMessage.prepend(QString("<b>%1</b><br />").arg(i18n("Fatal Error")));
QLabel *pix = new QLabel();
pix->setPixmap(KIcon("dialog-error").pixmap(30));
QLabel *label = new QLabel(errorMessage);
void Wizard::slotShowWebInfos()
{
- KRun::runUrl(KUrl("http://kdenlive.org/discover/" + QString(version).section(' ', 0, 0)), "text/html", this);
+ KRun::runUrl(KUrl("http://kdenlive.org/discover/" + QString(kdenlive_version).section(' ', 0, 0)), "text/html", this);
+}
+
+void Wizard::slotSaveCaptureFormat()
+{
+ QStringList format = m_capture.v4l_formats->itemData(m_capture.v4l_formats->currentIndex()).toStringList();
+ if (format.isEmpty()) return;
+ MltVideoProfile profile;
+ profile.description = "Video4Linux capture";
+ profile.colorspace = 601;
+ profile.width = format.at(1).toInt();
+ profile.height = format.at(2).toInt();
+ profile.sample_aspect_num = 1;
+ profile.sample_aspect_den = 1;
+ profile.display_aspect_num = format.at(1).toInt();
+ profile.display_aspect_den = format.at(2).toInt();
+ profile.frame_rate_num = format.at(3).toInt();
+ profile.frame_rate_den = format.at(4).toInt();
+ profile.progressive = 1;
+ QString vl4ProfilePath = KStandardDirs::locateLocal("appdata", "profiles/video4linux");
+ ProfilesDialog::saveProfile(profile, vl4ProfilePath);
}
#include "wizard.moc"
projects / kdenlive / blobdiff