* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA *
***************************************************************************/
-#include <QLabel>
-#include <QFile>
-#include <QXmlStreamWriter>
-#include <QApplication>
-#include <QTimer>
+#include "wizard.h"
+#include "kdenlivesettings.h"
+#include "profilesdialog.h"
+#include "v4l/v4lcapture.h"
+#include "kdenlive-config.h"
#include <KStandardDirs>
#include <KLocale>
#include <KProcess>
#include <kmimetype.h>
+#include <KRun>
+#include <KService>
+#include <KMimeTypeTrader>
-#include "kdenlivesettings.h"
-#include "profilesdialog.h"
-#include "wizard.h"
+#include <QLabel>
+#include <QFile>
+#include <QXmlStreamWriter>
+#include <QTimer>
+
+const double recommendedMltVersion = 510;
+static const char kdenlive_version[] = VERSION;
-Wizard::Wizard(QWidget *parent): QWizard(parent) {
+Wizard::Wizard(bool upgrade, QWidget *parent) :
+ QWizard(parent)
+{
+ setWindowTitle(i18n("Config Wizard"));
setPixmap(QWizard::WatermarkPixmap, QPixmap(KStandardDirs::locate("appdata", "banner.png")));
QWizardPage *page1 = new QWizardPage;
page1->setTitle(i18n("Welcome"));
- QLabel *label = new QLabel(i18n("This is the first time you run Kdenlive. This wizard will let you adjust some basic settings, you will be ready to edit your first movie in a few seconds..."));
+ QLabel *label;
+ if (upgrade)
+ label = new QLabel(i18n("Your Kdenlive version was upgraded to version %1. Please take some time to review the basic settings", QString(kdenlive_version).section(' ', 0, 0)));
+ else
+ label = new QLabel(i18n("This is the first time you run Kdenlive. This wizard will let you adjust some basic settings, you will be ready to edit your first movie in a few seconds..."));
label->setWordWrap(true);
m_startLayout = new QVBoxLayout;
m_startLayout->addWidget(label);
+ QPushButton *but = new QPushButton(KIcon("help-about"), i18n("Discover the features of this Kdenlive release"), this);
+ connect(but, SIGNAL(clicked()), this, SLOT(slotShowWebInfos()));
+ m_startLayout->addStretch();
+ m_startLayout->addWidget(but);
+
+
page1->setLayout(m_startLayout);
addPage(page1);
+ QWizardPage *page4 = new QWizardPage;
+ page4->setTitle(i18n("Checking MLT engine"));
+ m_mltCheck.setupUi(page4);
+ addPage(page4);
+
+ WizardDelegate *listViewDelegate = new WizardDelegate(m_mltCheck.programList);
+ m_mltCheck.programList->setItemDelegate(listViewDelegate);
+
QWizardPage *page2 = new QWizardPage;
page2->setTitle(i18n("Video Standard"));
m_standard.setupUi(page2);
- m_standard.profiles_list->setMaximumHeight(100);
- connect(m_standard.button_pal, SIGNAL(toggled(bool)), this, SLOT(slotCheckStandard()));
+
+ m_okIcon = KIcon("dialog-ok");
+ m_badIcon = KIcon("dialog-close");
+
+ // build profiles lists
+ QMap<QString, QString> profilesInfo = ProfilesDialog::getProfilesInfo();
+ QMap<QString, QString>::const_iterator i = profilesInfo.constBegin();
+ while (i != profilesInfo.constEnd()) {
+ QMap< QString, QString > profileData = ProfilesDialog::getSettingsFromFile(i.value());
+ if (profileData.value("width") == "720") m_dvProfiles.insert(i.key(), i.value());
+ else if (profileData.value("width").toInt() >= 1080) m_hdvProfiles.insert(i.key(), i.value());
+ else m_otherProfiles.insert(i.key(), i.value());
+ ++i;
+ }
+
+ m_standard.button_all->setChecked(true);
+ connect(m_standard.button_all, SIGNAL(toggled(bool)), this, SLOT(slotCheckStandard()));
+ connect(m_standard.button_hdv, SIGNAL(toggled(bool)), this, SLOT(slotCheckStandard()));
connect(m_standard.button_dv, SIGNAL(toggled(bool)), this, SLOT(slotCheckStandard()));
slotCheckStandard();
connect(m_standard.profiles_list, SIGNAL(itemSelectionChanged()), this, SLOT(slotCheckSelectedItem()));
+
+ // select default profile
+ if (!KdenliveSettings::default_profile().isEmpty()) {
+ for (int i = 0; i < m_standard.profiles_list->count(); i++) {
+ if (m_standard.profiles_list->item(i)->data(Qt::UserRole).toString() == KdenliveSettings::default_profile()) {
+ m_standard.profiles_list->setCurrentRow(i);
+ m_standard.profiles_list->scrollToItem(m_standard.profiles_list->currentItem());
+ break;
+ }
+ }
+ }
+
addPage(page2);
QWizardPage *page3 = new QWizardPage;
page3->setTitle(i18n("Additional Settings"));
m_extra.setupUi(page3);
+ m_extra.projectfolder->setMode(KFile::Directory);
+ m_extra.projectfolder->setUrl(KUrl(KdenliveSettings::defaultprojectfolder()));
m_extra.videothumbs->setChecked(KdenliveSettings::videothumbnails());
m_extra.audiothumbs->setChecked(KdenliveSettings::audiothumbnails());
m_extra.autosave->setChecked(KdenliveSettings::crashrecovery());
connect(m_extra.audiothumbs, SIGNAL(stateChanged(int)), this, SLOT(slotCheckThumbs()));
slotCheckThumbs();
addPage(page3);
+
+#ifndef Q_WS_MAC
+ QWizardPage *page6 = new QWizardPage;
+ page6->setTitle(i18n("Webcam"));
+ m_capture.setupUi(page6);
+ connect(m_capture.button_reload, SIGNAL(clicked()), this, SLOT(slotDetectWebcam()));
+ connect(m_capture.v4l_devices, SIGNAL(currentIndexChanged(int)), this, SLOT(slotUpdateCaptureParameters()));
+ connect(m_capture.v4l_formats, SIGNAL(currentIndexChanged(int)), this, SLOT(slotSaveCaptureFormat()));
+ m_capture.button_reload->setIcon(KIcon("view-refresh"));
+
+ addPage(page6);
+#endif
+
+ QWizardPage *page5 = new QWizardPage;
+ page5->setTitle(i18n("Checking system"));
+ m_check.setupUi(page5);
+ addPage(page5);
+
+ listViewDelegate = new WizardDelegate(m_check.programList);
+ m_check.programList->setItemDelegate(listViewDelegate);
+ slotDetectWebcam();
QTimer::singleShot(500, this, SLOT(slotCheckMlt()));
}
-void Wizard::installExtraMimes(QString baseName, QStringList globs) {
+void Wizard::slotDetectWebcam()
+{
+#if !defined(Q_WS_MAC) && !defined(Q_OS_FREEBSD)
+ m_capture.v4l_devices->blockSignals(true);
+ m_capture.v4l_devices->clear();
+
+ // Video 4 Linux device detection
+ for (int i = 0; i < 10; i++) {
+ QString path = "/dev/video" + QString::number(i);
+ if (QFile::exists(path)) {
+ QStringList deviceInfo = V4lCaptureHandler::getDeviceName(path.toUtf8().constData());
+ if (!deviceInfo.isEmpty()) {
+ m_capture.v4l_devices->addItem(deviceInfo.at(0), path);
+ m_capture.v4l_devices->setItemData(m_capture.v4l_devices->count() - 1, deviceInfo.at(1), Qt::UserRole + 1);
+ }
+ }
+ }
+ if (m_capture.v4l_devices->count() > 0) {
+ m_capture.v4l_status->setText(i18n("Select your default video4linux device"));
+ // select default device
+ bool found = false;
+ for (int i = 0; i < m_capture.v4l_devices->count(); i++) {
+ QString device = m_capture.v4l_devices->itemData(i).toString();
+ if (device == KdenliveSettings::video4vdevice()) {
+ m_capture.v4l_devices->setCurrentIndex(i);
+ found = true;
+ break;
+ }
+ }
+ slotUpdateCaptureParameters();
+ if (!found) m_capture.v4l_devices->setCurrentIndex(0);
+ } else m_capture.v4l_status->setText(i18n("No device found, plug your webcam and refresh."));
+ m_capture.v4l_devices->blockSignals(false);
+#endif
+}
+
+void Wizard::slotUpdateCaptureParameters()
+{
+ QString device = m_capture.v4l_devices->itemData(m_capture.v4l_devices->currentIndex()).toString();
+ if (!device.isEmpty()) KdenliveSettings::setVideo4vdevice(device);
+
+ QString formats = m_capture.v4l_devices->itemData(m_capture.v4l_devices->currentIndex(), Qt::UserRole + 1).toString();
+
+ m_capture.v4l_formats->blockSignals(true);
+ m_capture.v4l_formats->clear();
+
+ QString vl4ProfilePath = KStandardDirs::locateLocal("appdata", "profiles/video4linux");
+ if (QFile::exists(vl4ProfilePath)) {
+ MltVideoProfile profileInfo = ProfilesDialog::getVideoProfile(vl4ProfilePath);
+ m_capture.v4l_formats->addItem(i18n("Current settings (%1x%2, %3/%4fps)", profileInfo.width, profileInfo.height, profileInfo.frame_rate_num, profileInfo.frame_rate_den), QStringList() << QString("unknown") <<QString::number(profileInfo.width)<<QString::number(profileInfo.height)<<QString::number(profileInfo.frame_rate_num)<<QString::number(profileInfo.frame_rate_den));
+ }
+ QStringList pixelformats = formats.split(">", QString::SkipEmptyParts);
+ QString itemSize;
+ QString pixelFormat;
+ QStringList itemRates;
+ for (int i = 0; i < pixelformats.count(); i++) {
+ QString format = pixelformats.at(i).section(':', 0, 0);
+ QStringList sizes = pixelformats.at(i).split(":", QString::SkipEmptyParts);
+ pixelFormat = sizes.takeFirst();
+ for (int j = 0; j < sizes.count(); j++) {
+ itemSize = sizes.at(j).section("=", 0, 0);
+ itemRates = sizes.at(j).section("=", 1, 1).split(",", QString::SkipEmptyParts);
+ for (int k = 0; k < itemRates.count(); k++) {
+ m_capture.v4l_formats->addItem("[" + format + "] " + itemSize + " (" + itemRates.at(k) + ")", QStringList() << format << itemSize.section('x', 0, 0) << itemSize.section('x', 1, 1) << itemRates.at(k).section('/', 0, 0) << itemRates.at(k).section('/', 1, 1));
+ }
+ }
+ }
+ if (!QFile::exists(vl4ProfilePath)) {
+ if (m_capture.v4l_formats->count() > 9) slotSaveCaptureFormat();
+ else {
+ // No existing profile and no autodetected profiles
+ MltVideoProfile profileInfo;
+ profileInfo.width = 320;
+ profileInfo.height = 200;
+ profileInfo.frame_rate_num = 15;
+ profileInfo.frame_rate_den = 1;
+ profileInfo.display_aspect_num = 4;
+ profileInfo.display_aspect_den = 3;
+ profileInfo.sample_aspect_num = 1;
+ profileInfo.sample_aspect_den = 1;
+ profileInfo.progressive = 1;
+ profileInfo.colorspace = 601;
+ ProfilesDialog::saveProfile(profileInfo, vl4ProfilePath);
+ m_capture.v4l_formats->addItem(i18n("Default settings (%1x%2, %3/%4fps)", profileInfo.width, profileInfo.height, profileInfo.frame_rate_num, profileInfo.frame_rate_den), QStringList() << QString("unknown") <<QString::number(profileInfo.width)<<QString::number(profileInfo.height)<<QString::number(profileInfo.frame_rate_num)<<QString::number(profileInfo.frame_rate_den));
+ }
+ }
+ m_capture.v4l_formats->blockSignals(false);
+}
+
+void Wizard::checkMltComponents()
+{
+ QSize itemSize(20, fontMetrics().height() * 2.5);
+ m_mltCheck.programList->setColumnWidth(0, 30);
+ m_mltCheck.programList->setIconSize(QSize(24, 24));
+
+
+ QTreeWidgetItem *mltitem = new QTreeWidgetItem(m_mltCheck.programList);
+
+ QTreeWidgetItem *meltitem = new QTreeWidgetItem(m_mltCheck.programList, QStringList() << QString() << i18n("Melt") + " (" + KdenliveSettings::rendererpath() + ')');
+ meltitem->setData(1, Qt::UserRole, i18n("Required for rendering (part of MLT package)"));
+ meltitem->setSizeHint(0, itemSize);
+ meltitem->setIcon(0, m_okIcon);
+
+ // Check MLT's installed producers
+ QProcess checkProcess;
+ checkProcess.start(KdenliveSettings::rendererpath(), QStringList() << "-query" << "producer");
+ if (!checkProcess.waitForStarted()) {
+ meltitem->setIcon(0, m_badIcon);
+ meltitem->setData(1, Qt::UserRole, i18n("Error starting MLT's command line player (melt)"));
+ button(QWizard::NextButton)->setEnabled(false);
+ } else {
+ checkProcess.waitForFinished();
+ QByteArray result = checkProcess.readAllStandardError();
+
+ // Check MLT avformat module
+ QTreeWidgetItem *avformatItem = new QTreeWidgetItem(m_mltCheck.programList, QStringList() << QString() << i18n("Avformat module (FFmpeg)"));
+ avformatItem->setData(1, Qt::UserRole, i18n("Required to work with various video formats (hdv, mpeg, flash, ...)"));
+ avformatItem->setSizeHint(0, itemSize);
+ if (!result.contains("- avformat")) {
+ avformatItem->setIcon(0, m_badIcon);
+ m_mltCheck.tabWidget->setTabEnabled(1, false);
+ } else {
+ avformatItem->setIcon(0, m_okIcon);
+ // Make sure we have MLT > 0.3.4
+ int version = 0;
+ QString mltVersion;
+ QString exepath = KStandardDirs::findExe("pkg-config");
+ if (!exepath.isEmpty()) {
+ checkProcess.start(exepath, QStringList() << "--variable=version" << "mlt++");
+ if (!checkProcess.waitForStarted()) {
+ kDebug() << "// Error querying MLT's version";
+ } else {
+ checkProcess.waitForFinished();
+ mltVersion = checkProcess.readAllStandardOutput();
+ version = 1000 * mltVersion.section('.', 0, 0).toInt() + 100 * mltVersion.section('.', 1, 1).toInt() + mltVersion.section('.', 2, 2).toInt();
+ kDebug() << "// FOUND MLT's pkgconfig version: " << version;
+ }
+ }
+ if (version == 0) {
+ checkProcess.start(KdenliveSettings::rendererpath(), QStringList() << "--version");
+ if (!checkProcess.waitForStarted()) {
+ kDebug() << "// Error querying MLT's version";
+ } else {
+ checkProcess.waitForFinished();
+ mltVersion = checkProcess.readAllStandardError();
+ mltVersion = mltVersion.section('\n', 0, 0).simplified();
+ mltVersion = mltVersion.section(' ', -1).simplified();
+ version = 1000 * mltVersion.section('.', 0, 0).toInt() + 100 * mltVersion.section('.', 1, 1).toInt() + mltVersion.section('.', 2, 2).toInt();
+ kDebug() << "// FOUND MLT version: " << version;
+ }
+ }
+
+ mltitem->setText(1, i18n("MLT version: %1", mltVersion.simplified()));
+ mltitem->setSizeHint(0, itemSize);
+ if (version < 506) {
+ mltitem->setData(1, Qt::UserRole, i18n("Your MLT version is unsupported!!!"));
+ mltitem->setIcon(0, m_badIcon);
+ } else {
+ if (version < recommendedMltVersion) {
+ mltitem->setData(1, Qt::UserRole, i18n("Please upgrade to the latest MLT version"));
+ mltitem->setIcon(0, m_badIcon);
+ } else {
+ mltitem->setData(1, Qt::UserRole, i18n("MLT version is correct"));
+ mltitem->setIcon(0, m_okIcon);
+ }
+ // Check installed audio codecs
+ QProcess checkProcess2;
+ checkProcess2.start(KdenliveSettings::rendererpath(), QStringList() << "noise:" << "-consumer" << "avformat" << "acodec=list");
+ if (!checkProcess2.waitForStarted()) {
+ m_mltCheck.tabWidget->setTabEnabled(1, false);
+ kDebug() << "// Error parsing MLT's avformat codecs";
+ } else {
+ checkProcess2.waitForFinished();
+ QByteArray codecList = checkProcess2.readAllStandardError();
+ QString acodecList(codecList);
+ QStringList result;
+ QStringList alist = acodecList.split('\n', QString::SkipEmptyParts);
+ for (int i = 0; i < alist.count(); i++) {
+ if (alist.at(i).contains("- ")) result.append(alist.at(i).section("- ", 1).simplified().toLower());
+ }
+ m_mltCheck.acodecs_list->addItems(result);
+ KdenliveSettings::setAudiocodecs(result);
+ //kDebug()<<"// FOUND LIST:\n\n"<<m_audioCodecs<<"\n\n++++++++++++++++++++";
+ }
+ // Check video codecs
+ checkProcess2.start(KdenliveSettings::rendererpath(), QStringList() << "noise:" << "-consumer" << "avformat" << "vcodec=list");
+ if (!checkProcess2.waitForStarted()) {
+ kDebug() << "// Error parsing MLT's avformat codecs";
+ } else {
+ checkProcess2.waitForFinished();
+ QByteArray codecList = checkProcess2.readAllStandardError();
+ QString vcodecList(codecList);
+ QStringList result;
+ QStringList vlist = vcodecList.split('\n', QString::SkipEmptyParts);
+ for (int i = 0; i < vlist.count(); i++) {
+ if (vlist.at(i).contains("- ")) result.append(vlist.at(i).section("- ", 1).simplified().toLower());
+ }
+ m_mltCheck.vcodecs_list->addItems(result);
+ KdenliveSettings::setVideocodecs(result);
+ //kDebug()<<"// FOUND LIST:\n\n"<<m_videoCodecs<<"\n\n++++++++++++++++++++";
+ }
+ // Check formats
+ checkProcess2.start(KdenliveSettings::rendererpath(), QStringList() << "noise:" << "-consumer" << "avformat" << "f=list");
+ if (!checkProcess2.waitForStarted()) {
+ kDebug() << "// Error parsing MLT's avformat codecs";
+ } else {
+ checkProcess2.waitForFinished();
+ QByteArray codecList = checkProcess2.readAllStandardError();
+ QString vcodecList(codecList);
+ QStringList result;
+ QStringList vlist = vcodecList.split('\n', QString::SkipEmptyParts);
+ for (int i = 0; i < vlist.count(); i++) {
+ if (vlist.at(i).contains("- ")) {
+ QString format = vlist.at(i).section("- ", 1).simplified().toLower();
+ if (format.contains(',')) {
+ QStringList sub = format.split(',', QString::SkipEmptyParts);
+ for (int j = 0; j < sub.count(); j++)
+ result.append(sub.at(j));
+ } else result.append(format);
+ }
+ }
+ m_mltCheck.formats_list->addItems(result);
+ KdenliveSettings::setSupportedformats(result);
+ //kDebug()<<"// FOUND LIST:\n\n"<<m_videoCodecs<<"\n\n++++++++++++++++++++";
+ }
+ }
+
+ }
+
+ // Check MLT dv module
+ QTreeWidgetItem *dvItem = new QTreeWidgetItem(m_mltCheck.programList, QStringList() << QString() << i18n("DV module (libdv)"));
+ dvItem->setData(1, Qt::UserRole, i18n("Required to work with dv files if avformat module is not installed"));
+ dvItem->setSizeHint(0, itemSize);
+ if (!result.contains("- libdv")) {
+ dvItem->setIcon(0, m_badIcon);
+ } else {
+ dvItem->setIcon(0, m_okIcon);
+ }
+
+ // Check MLT image format module
+ QTreeWidgetItem *imageItem = new QTreeWidgetItem(m_mltCheck.programList, QStringList() << QString() << i18n("QImage module"));
+ imageItem->setData(1, Qt::UserRole, i18n("Required to work with images"));
+ imageItem->setSizeHint(0, itemSize);
+ if (!result.contains("- qimage")) {
+ imageItem->setIcon(0, m_badIcon);
+ imageItem = new QTreeWidgetItem(m_mltCheck.programList, QStringList() << QString() << i18n("Pixbuf module"));
+ imageItem->setData(1, Qt::UserRole, i18n("Required to work with images"));
+ imageItem->setSizeHint(0, itemSize);
+ if (!result.contains("- pixbuf")) imageItem->setIcon(0, m_badIcon);
+ else imageItem->setIcon(0, m_okIcon);
+ } else {
+ imageItem->setIcon(0, m_okIcon);
+ }
+
+ // Check MLT title module
+ QTreeWidgetItem *titleItem = new QTreeWidgetItem(m_mltCheck.programList, QStringList() << QString() << i18n("Title module"));
+ titleItem->setData(1, Qt::UserRole, i18n("Required to work with titles"));
+ titleItem->setSizeHint(0, itemSize);
+ if (!result.contains("- kdenlivetitle")) {
+ KdenliveSettings::setHastitleproducer(false);
+ titleItem->setIcon(0, m_badIcon);
+ } else {
+ titleItem->setIcon(0, m_okIcon);
+ KdenliveSettings::setHastitleproducer(true);
+ }
+ }
+}
+
+void Wizard::slotCheckPrograms()
+{
+ QSize itemSize(20, fontMetrics().height() * 2.5);
+ m_check.programList->setColumnWidth(0, 30);
+ m_check.programList->setIconSize(QSize(24, 24));
+
+ QTreeWidgetItem *item = new QTreeWidgetItem(m_check.programList, QStringList() << QString() << i18n("FFmpeg & ffplay"));
+ item->setData(1, Qt::UserRole, i18n("Required for webcam capture"));
+ item->setSizeHint(0, itemSize);
+ QString exepath = KStandardDirs::findExe("ffmpeg");
+ if (exepath.isEmpty()) item->setIcon(0, m_badIcon);
+ else if (KStandardDirs::findExe("ffplay").isEmpty()) item->setIcon(0, m_badIcon);
+ else item->setIcon(0, m_okIcon);
+
+#ifndef Q_WS_MAC
+ item = new QTreeWidgetItem(m_check.programList, QStringList() << QString() << i18n("recordmydesktop"));
+ item->setData(1, Qt::UserRole, i18n("Required for screen capture"));
+ item->setSizeHint(0, itemSize);
+ if (KStandardDirs::findExe("recordmydesktop").isEmpty()) item->setIcon(0, m_badIcon);
+ else item->setIcon(0, m_okIcon);
+
+ item = new QTreeWidgetItem(m_check.programList, QStringList() << QString() << i18n("dvgrab"));
+ item->setData(1, Qt::UserRole, i18n("Required for firewire capture"));
+ item->setSizeHint(0, itemSize);
+ if (KStandardDirs::findExe("dvgrab").isEmpty()) item->setIcon(0, m_badIcon);
+ else item->setIcon(0, m_okIcon);
+#endif
+
+ item = new QTreeWidgetItem(m_check.programList, QStringList() << QString() << i18n("dvdauthor"));
+ item->setData(1, Qt::UserRole, i18n("Required for creation of DVD"));
+ item->setSizeHint(0, itemSize);
+ if (KStandardDirs::findExe("dvdauthor").isEmpty()) item->setIcon(0, m_badIcon);
+ else item->setIcon(0, m_okIcon);
+
+
+ item = new QTreeWidgetItem(m_check.programList, QStringList() << QString() << i18n("genisoimage or mkisofs"));
+ item->setData(1, Qt::UserRole, i18n("Required for creation of DVD ISO images"));
+ item->setSizeHint(0, itemSize);
+ if (KStandardDirs::findExe("genisoimage").isEmpty()) {
+ // no GenIso, check for mkisofs
+ if (!KStandardDirs::findExe("mkisofs").isEmpty()) {
+ item->setIcon(0, m_okIcon);
+ } else item->setIcon(0, m_badIcon);
+ } else item->setIcon(0, m_okIcon);
+
+ item = new QTreeWidgetItem(m_check.programList, QStringList() << QString() << i18n("xine"));
+ item->setData(1, Qt::UserRole, i18n("Required to preview your DVD"));
+ item->setSizeHint(0, itemSize);
+ if (KStandardDirs::findExe("xine").isEmpty()) item->setIcon(0, m_badIcon);
+ else item->setIcon(0, m_okIcon);
+
+ // set up some default applications
+ QString program;
+ if (KdenliveSettings::defaultimageapp().isEmpty()) {
+ program = KStandardDirs::findExe("gimp");
+ if (program.isEmpty()) program = KStandardDirs::findExe("krita");
+ if (!program.isEmpty()) KdenliveSettings::setDefaultimageapp(program);
+ }
+ if (KdenliveSettings::defaultaudioapp().isEmpty()) {
+ program = KStandardDirs::findExe("audacity");
+ if (program.isEmpty()) program = KStandardDirs::findExe("traverso");
+ if (!program.isEmpty()) KdenliveSettings::setDefaultaudioapp(program);
+ }
+ if (KdenliveSettings::defaultplayerapp().isEmpty()) {
+ KService::Ptr offer = KMimeTypeTrader::self()->preferredService("video/mpeg");
+ if (offer)
+ KdenliveSettings::setDefaultplayerapp(KRun::binaryName(offer->exec(), true));
+ }
+}
+
+void Wizard::installExtraMimes(QString baseName, QStringList globs)
+{
QString mimefile = baseName;
mimefile.replace('/', '-');
KMimeType::Ptr mime = KMimeType::mimeType(baseName);
} else {
QStringList extensions = mime->patterns();
QString comment = mime->comment();
- foreach(const QString &glob, globs) {
+ foreach(const QString & glob, globs) {
if (!extensions.contains(glob)) extensions << glob;
}
kDebug() << "EXTS: " << extensions;
writer.writeEndElement(); // comment
}
- foreach(const QString& pattern, extensions) {
+ foreach(const QString & pattern, extensions) {
writer.writeStartElement(nsUri, "glob");
writer.writeAttribute("pattern", pattern);
writer.writeEndElement(); // glob
}
}
-void Wizard::runUpdateMimeDatabase() {
+void Wizard::runUpdateMimeDatabase()
+{
const QString localPackageDir = KStandardDirs::locateLocal("xdgdata-mime", QString());
//Q_ASSERT(!localPackageDir.isEmpty());
KProcess proc;
}
}
-void Wizard::slotCheckThumbs() {
+void Wizard::slotCheckThumbs()
+{
QString pixname = "timeline_vthumbs.png";
if (!m_extra.audiothumbs->isChecked() && !m_extra.videothumbs->isChecked()) {
pixname = "timeline_nothumbs.png";
m_extra.timeline_preview->setPixmap(QPixmap(KStandardDirs::locate("appdata", pixname)));
}
-void Wizard::slotCheckStandard() {
+void Wizard::slotCheckStandard()
+{
+ m_standard.profiles_list->clear();
QStringList profiles;
- if (m_standard.button_pal->isChecked()) {
- // PAL standard
- if (m_standard.button_dv->isChecked()) {
- profiles << "dv_pal" << "dv_pal_wide";
- } else {
- profiles << "hdv_720_25p" << "hdv_720_50p" << "hdv_1080_50i" << "hdv_1080_25p" << "atsc_1080p_24" << "atsc_1080p_25";
+ if (!m_standard.button_hdv->isChecked()) {
+ // DV standard
+ QMapIterator<QString, QString> i(m_dvProfiles);
+ while (i.hasNext()) {
+ i.next();
+ QListWidgetItem *item = new QListWidgetItem(i.key(), m_standard.profiles_list);
+ item->setData(Qt::UserRole, i.value());
}
- } else {
- // NTSC standard
- if (m_standard.button_dv->isChecked()) {
- profiles << "dv_ntsc" << "dv_ntsc_wide";
- } else {
- profiles << "hdv_720_30p" << "hdv_720_60p" << "hdv_1080_30p" << "hdv_1080_60i" << "atsc_720p_30" << "atsc_1080i_60";
+ }
+ if (!m_standard.button_dv->isChecked()) {
+ // HDV standard
+ QMapIterator<QString, QString> i(m_hdvProfiles);
+ while (i.hasNext()) {
+ i.next();
+ QListWidgetItem *item = new QListWidgetItem(i.key(), m_standard.profiles_list);
+ item->setData(Qt::UserRole, i.value());
}
}
- m_standard.profiles_list->clear();
- QStringList profilesDescription;
- foreach(const QString &prof, profiles) {
- QString desc = ProfilesDialog::getProfileDescription(prof);
- if (!desc.isEmpty()) {
- QListWidgetItem *item = new QListWidgetItem(desc, m_standard.profiles_list);
- item->setData(Qt::UserRole, prof);
+ if (m_standard.button_all->isChecked()) {
+ QMapIterator<QString, QString> i(m_otherProfiles);
+ while (i.hasNext()) {
+ i.next();
+ QListWidgetItem *item = new QListWidgetItem(i.key(), m_standard.profiles_list);
+ item->setData(Qt::UserRole, i.value());
}
+ //m_standard.profiles_list->sortItems();
+ }
+
+ for (int i = 0; i < m_standard.profiles_list->count(); i++) {
+ QListWidgetItem *item = m_standard.profiles_list->item(i);
+
+ QMap< QString, QString > values = ProfilesDialog::getSettingsFromFile(item->data(Qt::UserRole).toString());
+ const QString infoString = ("<strong>" + i18n("Frame size:") + " </strong>%1x%2<br /><strong>" + i18n("Frame rate:") + " </strong>%3/%4<br /><strong>" + i18n("Pixel aspect ratio:") + "</strong>%5/%6<br /><strong>" + i18n("Display aspect ratio:") + " </strong>%7/%8").arg(values.value("width"), values.value("height"), values.value("frame_rate_num"), values.value("frame_rate_den"), values.value("sample_aspect_num"), values.value("sample_aspect_den"), values.value("display_aspect_num"), values.value("display_aspect_den"));
+ item->setToolTip(infoString);
}
+
m_standard.profiles_list->setSortingEnabled(true);
m_standard.profiles_list->setCurrentRow(0);
}
-void Wizard::slotCheckSelectedItem() {
+void Wizard::slotCheckSelectedItem()
+{
// Make sure we always have an item highlighted
m_standard.profiles_list->setCurrentRow(m_standard.profiles_list->currentRow());
}
-void Wizard::adjustSettings() {
+void Wizard::adjustSettings()
+{
if (m_extra.installmimes->isChecked()) {
QStringList globs;
- globs << "*.mts" << "*.m2t";
+ globs << "*.mts" << "*.m2t" << "*.mod" << "*.ts" << "*.m2ts";
installExtraMimes("video/mpeg", globs);
globs.clear();
globs << "*.dv";
KdenliveSettings::setVideothumbnails(m_extra.videothumbs->isChecked());
KdenliveSettings::setCrashrecovery(m_extra.autosave->isChecked());
if (m_standard.profiles_list->currentItem()) {
- KdenliveSettings::setDefault_profile(m_standard.profiles_list->currentItem()->data(Qt::UserRole).toString());
+ QString selectedProfile = m_standard.profiles_list->currentItem()->data(Qt::UserRole).toString();
+ if (selectedProfile.isEmpty()) selectedProfile = "dv_pal";
+ KdenliveSettings::setDefault_profile(selectedProfile);
}
+ QString path = m_extra.projectfolder->url().path();
+ if (KStandardDirs::makeDir(path) == false) {
+ kDebug() << "/// ERROR CREATING PROJECT FOLDER: " << path;
+ } else KdenliveSettings::setDefaultprojectfolder(path);
+
}
-void Wizard::slotCheckMlt() {
+void Wizard::slotCheckMlt()
+{
QString errorMessage;
if (KdenliveSettings::rendererpath().isEmpty()) {
- errorMessage.append(i18n("your MLT installation cannot be found. Install MLT and restart Kdenlive.\n"));
+ errorMessage.append(i18n("Your MLT installation cannot be found. Install MLT and restart Kdenlive.\n"));
}
- QProcess checkProcess;
+ /*QProcess checkProcess;
checkProcess.start(KdenliveSettings::rendererpath(), QStringList() << "-query" << "producer");
if (!checkProcess.waitForStarted())
- errorMessage.append(i18n("Error starting MLT's command line player (inigo)") + ".\n");
+ errorMessage.append(i18n("Error starting MLT's command line player (melt)") + ".\n");
checkProcess.waitForFinished();
QByteArray result = checkProcess.readAllStandardError();
- if (!result.contains("- avformat")) errorMessage.append(i18n("MLT's avformat (FFMPEG) module not found. Please check your FFMPEG and MLT install. Kdenlive will not work until this issue is fixed.") + "\n");
+ if (!result.contains("- avformat")) errorMessage.append(i18n("MLT's avformat (FFMPEG) module not found. Please check your FFMPEG and MLT install. Kdenlive will not work until this issue is fixed.") + "\n");*/
QProcess checkProcess2;
checkProcess2.start(KdenliveSettings::rendererpath(), QStringList() << "-query" << "consumer");
if (!checkProcess2.waitForStarted())
- errorMessage.append(i18n("Error starting MLT's command line player (inigo).") + "\n");
+ errorMessage.append(i18n("Error starting MLT's command line player (melt).") + '\n');
checkProcess2.waitForFinished();
- result = checkProcess2.readAllStandardError();
- if (!result.contains("sdl") || !result.contains("sdl_preview")) errorMessage.append(i18n("MLT's SDL module not found. Please check your MLT install. Kdenlive will not work until this issue is fixed.") + "\n");
+ QByteArray result = checkProcess2.readAllStandardError();
+ if (!result.contains("sdl") || !result.contains("sdl_preview")) errorMessage.append(i18n("MLT's SDL module not found. Please check your MLT install. Kdenlive will not work until this issue is fixed.") + '\n');
if (!errorMessage.isEmpty()) {
- errorMessage.prepend(QString("<b>%1</b><br>").arg(i18n("Fatal Error")));
+ errorMessage.prepend(QString("<b>%1</b><br />").arg(i18n("Fatal Error")));
QLabel *pix = new QLabel();
pix->setPixmap(KIcon("dialog-error").pixmap(30));
QLabel *label = new QLabel(errorMessage);
m_systemCheckIsOk = false;
button(QWizard::NextButton)->setEnabled(false);
} else m_systemCheckIsOk = true;
+
+ if (m_systemCheckIsOk) checkMltComponents();
+ slotCheckPrograms();
}
-bool Wizard::isOk() const {
+bool Wizard::isOk() const
+{
return m_systemCheckIsOk;
}
+void Wizard::slotShowWebInfos()
+{
+ KRun::runUrl(KUrl("http://kdenlive.org/discover/" + QString(kdenlive_version).section(' ', 0, 0)), "text/html", this);
+}
+
+void Wizard::slotSaveCaptureFormat()
+{
+ QStringList format = m_capture.v4l_formats->itemData(m_capture.v4l_formats->currentIndex()).toStringList();
+ if (format.isEmpty()) return;
+ MltVideoProfile profile;
+ profile.description = "Video4Linux capture";
+ profile.colorspace = 601;
+ profile.width = format.at(1).toInt();
+ profile.height = format.at(2).toInt();
+ profile.sample_aspect_num = 1;
+ profile.sample_aspect_den = 1;
+ profile.display_aspect_num = format.at(1).toInt();
+ profile.display_aspect_den = format.at(2).toInt();
+ profile.frame_rate_num = format.at(3).toInt();
+ profile.frame_rate_den = format.at(4).toInt();
+ profile.progressive = 1;
+ QString vl4ProfilePath = KStandardDirs::locateLocal("appdata", "profiles/video4linux");
+ ProfilesDialog::saveProfile(profile, vl4ProfilePath);
+}
+
#include "wizard.moc"
projects / kdenlive / blobdiff