local transition_start = -2.0
local transition_end = -1.0
-local zoom_src = 0.0
-local zoom_dst = 1.0
-local zoom_poi = 0 -- which input to zoom in on
-local fade_src_signal = 0
-local fade_dst_signal = 0
+local transition_type = 0
+local transition_src_signal = 0
+local transition_dst_signal = 0
-local input0_neutral_color = {0.5, 0.5, 0.5}
-local input1_neutral_color = {0.5, 0.5, 0.5}
+local neutral_colors = {
+ {0.5, 0.5, 0.5}, -- Input 0.
+ {0.5, 0.5, 0.5} -- Input 1.
+}
local live_signal_num = 0
local preview_signal_num = 1
local SBS_SIGNAL_NUM = 2
local STATIC_SIGNAL_NUM = 3
--- “fake” signal number that signifies that we are fading from one input
--- to the next.
-local FADE_SIGNAL_NUM = 4
+-- Valid values for transition_type. (Cuts are done directly, so they need no entry.)
+local NO_TRANSITION = 0
+local ZOOM_TRANSITION = 1 -- Also for slides.
+local FADE_TRANSITION = 2
-- Last width/height/frame rate for each channel, if we have it.
-- Note that unlike the values we get from Nageru, the resolution is per
end
-- The main live chain.
-function make_sbs_chain(input0_deint, input1_deint, hq)
+function make_sbs_chain(input0_type, input1_type, hq)
local chain = EffectChain.new(16, 9)
- local input0 = make_sbs_input(chain, INPUT0_SIGNAL_NUM, input0_deint, hq)
- local input1 = make_sbs_input(chain, INPUT1_SIGNAL_NUM, input1_deint, hq)
+ local input0 = make_sbs_input(chain, INPUT0_SIGNAL_NUM, input0_type == "livedeint", hq)
+ local input1 = make_sbs_input(chain, INPUT1_SIGNAL_NUM, input1_type == "livedeint", hq)
input0.padding_effect:set_vec4("border_color", 0.0, 0.0, 0.0, 1.0)
input1.padding_effect:set_vec4("border_color", 0.0, 0.0, 0.0, 0.0)
{"live", "livedeint"}, -- input1_type
{true, false} -- hq
}, function(input0_type, input1_type, hq)
- local input0_deint = (input0_type == "livedeint")
- local input1_deint = (input1_type == "livedeint")
- return make_sbs_chain(input0_deint, input1_deint, hq)
+ return make_sbs_chain(input0_type, input1_type, hq)
end)
function make_fade_input(chain, signal, live, deint, scale)
-- We assume this is already correctly scaled at load time.
return false
end
- assert(signal_num == INPUT0_SIGNAL_NUM or signal_num == INPUT1_SIGNAL_NUM)
+ assert(is_plain_signal(signal_num))
return (signals:get_width(signal_num) ~= width or signals:get_height(signal_num) ~= height)
end
return 4
end
+function is_plain_signal(num)
+ return num == INPUT0_SIGNAL_NUM or num == INPUT1_SIGNAL_NUM
+end
+
-- Helper function to write e.g. “720p60”. The difference between this
-- and get_channel_resolution_raw() is that this one also can say that
-- there's no signal.
function get_channel_resolution(signal_num)
res = last_resolution[signal_num]
- if (not res) or res.height <= 0 then
+ if (not res) or not res.is_connected then
+ return "disconnected"
+ end
+ if res.height <= 0 then
return "no signal"
end
if not res.has_signal then
-- Called at the start of the program, and then each frame for live
-- channels in case they change resolution.
function channel_name(channel)
- if channel == 2 then
- return "Input 1 (" .. get_channel_resolution(0) .. ")"
- elseif channel == 3 then
- return "Input 2 (" .. get_channel_resolution(1) .. ")"
- elseif channel == 4 then
+ local signal_num = channel - 2
+ if is_plain_signal(signal_num) then
+ return "Input " .. (signal_num + 1) .. " (" .. get_channel_resolution(signal_num) .. ")"
+ elseif signal_num == SBS_SIGNAL_NUM then
return "Side-by-side"
- elseif channel == 5 then
+ elseif signal_num == STATIC_SIGNAL_NUM then
return "Static picture"
end
end
-- "transparent" is allowed.
-- Will never be called for live (0) or preview (1).
function channel_color(channel)
- if channel_involved_in(channel, live_signal_num) then
- return "#f00"
+ if transition_type ~= NO_TRANSITION then
+ if channel_involved_in(channel, transition_src_signal) or
+ channel_involved_in(channel, transition_dst_signal) then
+ return "#f00"
+ end
+ else
+ if channel_involved_in(channel, live_signal_num) then
+ return "#f00"
+ end
end
if channel_involved_in(channel, preview_signal_num) then
return "#0f0"
end
function channel_involved_in(channel, signal_num)
- if signal_num == INPUT0_SIGNAL_NUM then
- return channel == 2
- end
- if signal_num == INPUT1_SIGNAL_NUM then
- return channel == 3
+ if is_plain_signal(signal_num) then
+ return channel == (signal_num + 2)
end
if signal_num == SBS_SIGNAL_NUM then
return (channel == 2 or channel == 3)
if signal_num == STATIC_SIGNAL_NUM then
return (channel == 5)
end
- if signal_num == FADE_SIGNAL_NUM then
- return (channel_involved_in(channel, fade_src_signal) or
- channel_involved_in(channel, fade_dst_signal))
- end
return false
end
-- Returns if a given channel supports setting white balance (starting from 2).
-- Called only once for each channel, at the start of the program.
function supports_set_wb(channel)
- return channel == 2 or channel == 3
+ return is_plain_signal(channel - 2)
end
-- API ENTRY POINT
-- Gets called with a new gray point when the white balance is changing.
-- The color is in linear light (not sRGB gamma).
function set_wb(channel, red, green, blue)
- if channel == 2 then
- input0_neutral_color = { red, green, blue }
- elseif channel == 3 then
- input1_neutral_color = { red, green, blue }
+ if is_plain_signal(channel - 2) then
+ neutral_colors[channel - 2 + 1] = { red, green, blue }
end
end
function finish_transitions(t)
- -- If live is SBS but de-facto single, make it so.
- if live_signal_num == SBS_SIGNAL_NUM and t >= transition_end and zoom_dst == 1.0 then
- live_signal_num = zoom_poi
+ if transition_type ~= NO_TRANSITION and t >= transition_end then
+ live_signal_num = transition_dst_signal
+ transition_type = NO_TRANSITION
end
+end
- -- If live is fade but de-facto single, make it so.
- if live_signal_num == FADE_SIGNAL_NUM and t >= transition_end then
- live_signal_num = fade_dst_signal
- end
+function in_transition(t)
+ return t >= transition_start and t <= transition_end
end
-- API ENTRY POINT
-- Called every frame.
function get_transitions(t)
+ if in_transition(t) then
+ -- Transition already in progress, the only thing we can do is really
+ -- cut to the preview. (TODO: Make an “abort” and/or “finish”, too?)
+ return {"Cut"}
+ end
+
finish_transitions(t)
if live_signal_num == preview_signal_num then
return {}
end
- if live_signal_num == SBS_SIGNAL_NUM and t >= transition_start and t <= transition_end then
- -- Zoom in progress.
- return {"Cut"}
- end
-
- if (live_signal_num == INPUT0_SIGNAL_NUM or
- live_signal_num == INPUT1_SIGNAL_NUM or
- live_signal_num == STATIC_SIGNAL_NUM) and
- (preview_signal_num == INPUT0_SIGNAL_NUM or
- preview_signal_num == INPUT1_SIGNAL_NUM or
- preview_signal_num == STATIC_SIGNAL_NUM) then
+ if (is_plain_signal(live_signal_num) or live_signal_num == STATIC_SIGNAL_NUM) and
+ (is_plain_signal(preview_signal_num) or preview_signal_num == STATIC_SIGNAL_NUM) then
return {"Cut", "", "Fade"}
end
-- Various zooms.
- if live_signal_num == SBS_SIGNAL_NUM and
- (preview_signal_num == INPUT0_SIGNAL_NUM or preview_signal_num == INPUT1_SIGNAL_NUM) then
+ if live_signal_num == SBS_SIGNAL_NUM and is_plain_signal(preview_signal_num) then
return {"Cut", "Zoom in"}
- elseif (live_signal_num == INPUT0_SIGNAL_NUM or live_signal_num == INPUT1_SIGNAL_NUM) and
- preview_signal_num == SBS_SIGNAL_NUM then
+ elseif is_plain_signal(live_signal_num) and preview_signal_num == SBS_SIGNAL_NUM then
return {"Cut", "Zoom out"}
end
return {"Cut"}
end
+function swap_preview_live()
+ local temp = live_signal_num
+ live_signal_num = preview_signal_num
+ preview_signal_num = temp
+end
+
+function start_transition(type_, t, duration)
+ transition_start = t
+ transition_end = t + duration
+ transition_type = type_
+ transition_src_signal = live_signal_num
+ transition_dst_signal = preview_signal_num
+ swap_preview_live()
+end
+
-- API ENTRY POINT
-- Called when the user clicks a transition button.
function transition_clicked(num, t)
if num == 0 then
-- Cut.
- if live_signal_num == FADE_SIGNAL_NUM then
- -- Ongoing fade; finish it immediately.
+ if in_transition(t) then
+ -- Ongoing transition; finish it immediately before the cut.
finish_transitions(transition_end)
end
- local temp = live_signal_num
- live_signal_num = preview_signal_num
- preview_signal_num = temp
-
- if live_signal_num == SBS_SIGNAL_NUM then
- -- Just cut to SBS, we need to reset any zooms.
- zoom_src = 1.0
- zoom_dst = 0.0
- transition_start = -2.0
- transition_end = -1.0
- end
+ swap_preview_live()
elseif num == 1 then
-- Zoom.
-
finish_transitions(t)
if live_signal_num == preview_signal_num then
return
end
- if (live_signal_num == INPUT0_SIGNAL_NUM and preview_signal_num == INPUT1_SIGNAL_NUM) or
- (live_signal_num == INPUT1_SIGNAL_NUM and preview_signal_num == INPUT0_SIGNAL_NUM) then
+ if is_plain_signal(live_signal_num) and is_plain_signal(preview_signal_num) then
-- We can't zoom between these. Just make a cut.
io.write("Cutting from " .. live_signal_num .. " to " .. live_signal_num .. "\n")
- local temp = live_signal_num
- live_signal_num = preview_signal_num
- preview_signal_num = temp
+ swap_preview_live()
return
end
- if live_signal_num == SBS_SIGNAL_NUM and
- (preview_signal_num == INPUT0_SIGNAL_NUM or preview_signal_num == INPUT1_SIGNAL_NUM) then
- -- Zoom in from SBS to single.
- transition_start = t
- transition_end = t + 1.0
- zoom_src = 0.0
- zoom_dst = 1.0
- zoom_poi = preview_signal_num
- preview_signal_num = SBS_SIGNAL_NUM
- elseif (live_signal_num == INPUT0_SIGNAL_NUM or live_signal_num == INPUT1_SIGNAL_NUM) and
- preview_signal_num == SBS_SIGNAL_NUM then
- -- Zoom out from single to SBS.
- transition_start = t
- transition_end = t + 1.0
- zoom_src = 1.0
- zoom_dst = 0.0
- preview_signal_num = live_signal_num
- zoom_poi = live_signal_num
- live_signal_num = SBS_SIGNAL_NUM
+ if (live_signal_num == SBS_SIGNAL_NUM and is_plain_signal(preview_signal_num)) or
+ (preview_signal_num == SBS_SIGNAL_NUM and is_plain_signal(live_signal_num)) then
+ start_transition(ZOOM_TRANSITION, t, 1.0)
end
elseif num == 2 then
finish_transitions(t)
-- Fade.
if (live_signal_num ~= preview_signal_num) and
- (live_signal_num == INPUT0_SIGNAL_NUM or
- live_signal_num == INPUT1_SIGNAL_NUM or
+ (is_plain_signal(live_signal_num) or
live_signal_num == STATIC_SIGNAL_NUM) and
- (preview_signal_num == INPUT0_SIGNAL_NUM or
- preview_signal_num == INPUT1_SIGNAL_NUM or
+ (is_plain_signal(preview_signal_num) or
preview_signal_num == STATIC_SIGNAL_NUM) then
- transition_start = t
- transition_end = t + 1.0
- fade_src_signal = live_signal_num
- fade_dst_signal = preview_signal_num
- preview_signal_num = live_signal_num
- live_signal_num = FADE_SIGNAL_NUM
+ start_transition(FADE_TRANSITION, t, 1.0)
else
-- Fades involving SBS are ignored (we have no chain for it).
end
preview_signal_num = num
end
+function get_fade_chain(signals, t, width, height, input_resolution)
+ local input0_type = get_input_type(signals, transition_src_signal)
+ local input0_scale = needs_scale(signals, transition_src_signal, width, height)
+ local input1_type = get_input_type(signals, transition_dst_signal)
+ local input1_scale = needs_scale(signals, transition_dst_signal, width, height)
+ local chain = fade_chains[input0_type][input0_scale][input1_type][input1_scale][true]
+ prepare = function()
+ if input0_type == "live" or input0_type == "livedeint" then
+ chain.input0.input:connect_signal(transition_src_signal)
+ set_neutral_color_from_signal(chain.input0.wb_effect, transition_src_signal)
+ end
+ set_scale_parameters_if_needed(chain.input0, width, height)
+ if input1_type == "live" or input1_type == "livedeint" then
+ chain.input1.input:connect_signal(transition_dst_signal)
+ set_neutral_color_from_signal(chain.input1.wb_effect, transition_dst_signal)
+ end
+ set_scale_parameters_if_needed(chain.input1, width, height)
+ local tt = calc_fade_progress(t, transition_start, transition_end)
+
+ chain.mix_effect:set_float("strength_first", 1.0 - tt)
+ chain.mix_effect:set_float("strength_second", tt)
+ end
+ return chain.chain, prepare
+end
+
+-- SBS code (live_signal_num == SBS_SIGNAL_NUM, or in a transition to/from it).
+function get_sbs_chain(signals, t, width, height, input_resolution)
+ local input0_type = get_input_type(signals, INPUT0_SIGNAL_NUM)
+ local input1_type = get_input_type(signals, INPUT1_SIGNAL_NUM)
+ return sbs_chains[input0_type][input1_type][true]
+end
+
-- API ENTRY POINT
-- Called every frame. Get the chain for displaying at input <num>,
-- where 0 is live, 1 is preview, 2 is the first channel to display
width = signals:get_width(signal_num),
height = signals:get_height(signal_num),
interlaced = signals:get_interlaced(signal_num),
+ is_connected = signals:get_is_connected(signal_num),
has_signal = signals:get_has_signal(signal_num),
frame_rate_nom = signals:get_frame_rate_nom(signal_num),
frame_rate_den = signals:get_frame_rate_den(signal_num)
last_resolution = input_resolution
if num == 0 then -- Live.
- if live_signal_num == INPUT0_SIGNAL_NUM or live_signal_num == INPUT1_SIGNAL_NUM then -- Plain input.
+ finish_transitions(t)
+ if transition_type == ZOOM_TRANSITION then
+ -- Transition in or out of SBS.
+ local chain = get_sbs_chain(signals, t, width, height, input_resolution)
+ prepare = function()
+ prepare_sbs_chain(chain, calc_zoom_progress(t), transition_type, transition_src_signal, transition_dst_signal, width, height, input_resolution)
+ end
+ return chain.chain, prepare
+ elseif transition_type == NO_TRANSITION and live_signal_num == SBS_SIGNAL_NUM then
+ -- Static SBS view.
+ local chain = get_sbs_chain(signals, t, width, height, input_resolution)
+ prepare = function()
+ prepare_sbs_chain(chain, 0.0, NO_TRANSITION, 0, SBS_SIGNAL_NUM, width, height, input_resolution)
+ end
+ return chain.chain, prepare
+ elseif transition_type == FADE_TRANSITION then
+ return get_fade_chain(signals, t, width, height, input_resolution)
+ elseif is_plain_signal(live_signal_num) then
local input_type = get_input_type(signals, live_signal_num)
local input_scale = needs_scale(signals, live_signal_num, width, height)
local chain = simple_chains[input_type][input_scale][true]
prepare = function()
end
return static_chain_hq, prepare
- elseif live_signal_num == FADE_SIGNAL_NUM then -- Fade.
- local input0_type = get_input_type(signals, fade_src_signal)
- local input0_scale = needs_scale(signals, fade_src_signal, width, height)
- local input1_type = get_input_type(signals, fade_dst_signal)
- local input1_scale = needs_scale(signals, fade_dst_signal, width, height)
- local chain = fade_chains[input0_type][input0_scale][input1_type][input1_scale][true]
- prepare = function()
- if input0_type == "live" or input0_type == "livedeint" then
- chain.input0.input:connect_signal(fade_src_signal)
- set_neutral_color_from_signal(chain.input0.wb_effect, fade_src_signal)
- end
- set_scale_parameters_if_needed(chain.input0, width, height)
- if input1_type == "live" or input1_type == "livedeint" then
- chain.input1.input:connect_signal(fade_dst_signal)
- set_neutral_color_from_signal(chain.input1.wb_effect, fade_dst_signal)
- end
- set_scale_parameters_if_needed(chain.input1, width, height)
- local tt = calc_fade_progress(t, transition_start, transition_end)
-
- chain.mix_effect:set_float("strength_first", 1.0 - tt)
- chain.mix_effect:set_float("strength_second", tt)
- end
- return chain.chain, prepare
- end
-
- -- SBS code (live_signal_num == SBS_SIGNAL_NUM).
- local input0_type = get_input_type(signals, INPUT0_SIGNAL_NUM)
- local input1_type = get_input_type(signals, INPUT1_SIGNAL_NUM)
- if t > transition_end and zoom_dst == 1.0 then
- -- Special case: Show only the single image on screen.
- local input0_scale = needs_scale(signals, fade_src_signal, width, height)
- local chain = simple_chains[input0_type][input0_scale][true]
- prepare = function()
- chain.input:connect_signal(INPUT0_SIGNAL_NUM)
- set_scale_parameters_if_needed(chain, width, height)
- set_neutral_color(chain.wb_effect, input0_neutral_color)
- end
- return chain.chain, prepare
- end
- local chain = sbs_chains[input0_type][input1_type][true]
- prepare = function()
- if t < transition_start then
- prepare_sbs_chain(chain, zoom_src, width, height, input_resolution)
- elseif t > transition_end then
- prepare_sbs_chain(chain, zoom_dst, width, height, input_resolution)
- else
- local tt = (t - transition_start) / (transition_end - transition_start)
- -- Smooth it a bit.
- tt = math.sin(tt * 3.14159265358 * 0.5)
- prepare_sbs_chain(chain, zoom_src + (zoom_dst - zoom_src) * tt, width, height, input_resolution)
- end
+ else
+ assert(false)
end
- return chain.chain, prepare
end
if num == 1 then -- Preview.
num = preview_signal_num + 2
end
-- Individual preview inputs.
- if num == INPUT0_SIGNAL_NUM + 2 then
- local input_type = get_input_type(signals, INPUT0_SIGNAL_NUM)
- local input_scale = needs_scale(signals, INPUT0_SIGNAL_NUM, width, height)
+ if is_plain_signal(num - 2) then
+ local signal_num = num - 2
+ local input_type = get_input_type(signals, signal_num)
+ local input_scale = needs_scale(signals, signal_num, width, height)
local chain = simple_chains[input_type][input_scale][false]
prepare = function()
- chain.input:connect_signal(INPUT0_SIGNAL_NUM)
+ chain.input:connect_signal(signal_num)
set_scale_parameters_if_needed(chain, width, height)
- set_neutral_color(chain.wb_effect, input0_neutral_color)
- end
- return chain.chain, prepare
- end
- if num == INPUT1_SIGNAL_NUM + 2 then
- local input_type = get_input_type(signals, INPUT1_SIGNAL_NUM)
- local input_scale = needs_scale(signals, INPUT1_SIGNAL_NUM, width, height)
- local chain = simple_chains[input_type][input_scale][false]
- prepare = function()
- chain.input:connect_signal(INPUT1_SIGNAL_NUM)
- set_scale_parameters_if_needed(chain, width, height)
- set_neutral_color(chain.wb_effect, input1_neutral_color)
+ set_neutral_color(chain.wb_effect, neutral_colors[signal_num + 1])
end
return chain.chain, prepare
end
local input1_type = get_input_type(signals, INPUT1_SIGNAL_NUM)
local chain = sbs_chains[input0_type][input1_type][false]
prepare = function()
- prepare_sbs_chain(chain, 0.0, width, height, input_resolution)
+ prepare_sbs_chain(chain, 0.0, NO_TRANSITION, 0, SBS_SIGNAL_NUM, width, height, input_resolution)
end
return chain.chain, prepare
end
-- Cull.
if x0 > screen_width or x1 < 0.0 or y0 > screen_height or y1 < 0.0 then
- resample_effect:set_int("width", 1)
- resample_effect:set_int("height", 1)
- resample_effect:set_float("zoom_x", screen_width)
- resample_effect:set_float("zoom_y", screen_height)
+ if resample_effect ~= nil then
+ resample_effect:set_int("width", 1)
+ resample_effect:set_int("height", 1)
+ resample_effect:set_float("zoom_x", screen_width)
+ resample_effect:set_float("zoom_y", screen_height)
+ else
+ resize_effect:set_int("width", 1)
+ resize_effect:set_int("height", 1)
+ end
padding_effect:set_int("left", screen_width + 100)
padding_effect:set_int("top", screen_height + 100)
return
return a + (b - a) * t
end
-function prepare_sbs_chain(chain, t, screen_width, screen_height, input_resolution)
+function lerp_pos(a, b, t)
+ return {
+ x0 = lerp(a.x0, b.x0, t),
+ y0 = lerp(a.y0, b.y0, t),
+ x1 = lerp(a.x1, b.x1, t),
+ y1 = lerp(a.y1, b.y1, t)
+ }
+end
+
+function pos_from_top_left(x, y, width, height, screen_width, screen_height)
+ local xs = screen_width / 1280.0
+ local ys = screen_height / 720.0
+ return {
+ x0 = round(xs * x),
+ y0 = round(ys * y),
+ x1 = round(xs * (x + width)),
+ y1 = round(ys * (y + height))
+ }
+end
+
+function prepare_sbs_chain(chain, t, transition_type, src_signal, dst_signal, screen_width, screen_height, input_resolution)
chain.input0.input:connect_signal(0)
chain.input1.input:connect_signal(1)
- set_neutral_color(chain.input0.wb_effect, input0_neutral_color)
- set_neutral_color(chain.input1.wb_effect, input1_neutral_color)
+ set_neutral_color(chain.input0.wb_effect, neutral_colors[1])
+ set_neutral_color(chain.input1.wb_effect, neutral_colors[2])
-- First input is positioned (16,48) from top-left.
- local width0 = round(848 * screen_width/1280.0)
- local height0 = round(width0 * 9.0 / 16.0)
-
- local top0 = 48 * screen_height/720.0
- local left0 = 16 * screen_width/1280.0
- local bottom0 = top0 + height0
- local right0 = left0 + width0
-
-- Second input is positioned (16,48) from the bottom-right.
- local width1 = round(384 * screen_width/1280.0)
- local height1 = round(216 * screen_height/720.0)
-
- local bottom1 = screen_height - 48 * screen_height/720.0
- local right1 = screen_width - 16 * screen_width/1280.0
- local top1 = bottom1 - height1
- local left1 = right1 - width1
-
- -- Interpolate between the fullscreen and side-by-side views.
- local scale0, tx0, tx0
- if zoom_poi == INPUT0_SIGNAL_NUM then
- local new_left0 = lerp(left0, 0, t)
- local new_right0 = lerp(right0, screen_width, t)
- local new_top0 = lerp(top0, 0, t)
- local new_bottom0 = lerp(bottom0, screen_height, t)
-
- scale0 = (new_right0 - new_left0) / width0 -- Same vertically and horizonally.
- tx0 = new_left0 - left0 * scale0
- ty0 = new_top0 - top0 * scale0
+ local pos0 = pos_from_top_left(16, 48, 848, 477, screen_width, screen_height)
+ local pos1 = pos_from_top_left(1280 - 384 - 16, 720 - 216 - 48, 384, 216, screen_width, screen_height)
+
+ local pos_fs = { x0 = 0, y0 = 0, x1 = screen_width, y1 = screen_height }
+ local affine_param
+ if transition_type == NO_TRANSITION then
+ -- Static SBS view.
+ affine_param = { sx = 1.0, sy = 1.0, tx = 0.0, ty = 0.0 } -- Identity.
else
- local new_left1 = lerp(left1, 0, t)
- local new_right1 = lerp(right1, screen_width, t)
- local new_top1 = lerp(top1, 0, t)
- local new_bottom1 = lerp(bottom1, screen_height, t)
+ -- Zooming to/from SBS view into or out of a single view.
+ assert(transition_type == ZOOM_TRANSITION)
+ local signal, real_t
+ if src_signal == SBS_SIGNAL_NUM then
+ signal = dst_signal
+ real_t = t
+ else
+ assert(dst_signal == SBS_SIGNAL_NUM)
+ signal = src_signal
+ real_t = 1.0 - t
+ end
- scale0 = (new_right1 - new_left1) / width1 -- Same vertically and horizonally.
- tx0 = new_left1 - left1 * scale0
- ty0 = new_top1 - top1 * scale0
+ if signal == INPUT0_SIGNAL_NUM then
+ affine_param = find_affine_param(pos0, lerp_pos(pos0, pos_fs, real_t))
+ elseif signal == INPUT1_SIGNAL_NUM then
+ affine_param = find_affine_param(pos1, lerp_pos(pos1, pos_fs, real_t))
+ end
end
- top0 = top0 * scale0 + ty0
- bottom0 = bottom0 * scale0 + ty0
- left0 = left0 * scale0 + tx0
- right0 = right0 * scale0 + tx0
+ -- NOTE: input_resolution is not 1-indexed, unlike usual Lua arrays.
+ place_rectangle_with_affine(chain.input0.resample_effect, chain.input0.resize_effect, chain.input0.padding_effect, pos0, affine_param, screen_width, screen_height, input_resolution[0].width, input_resolution[0].height)
+ place_rectangle_with_affine(chain.input1.resample_effect, chain.input1.resize_effect, chain.input1.padding_effect, pos1, affine_param, screen_width, screen_height, input_resolution[1].width, input_resolution[1].height)
+end
- top1 = top1 * scale0 + ty0
- bottom1 = bottom1 * scale0 + ty0
- left1 = left1 * scale0 + tx0
- right1 = right1 * scale0 + tx0
- place_rectangle(chain.input0.resample_effect, chain.input0.resize_effect, chain.input0.padding_effect, left0, top0, right0, bottom0, screen_width, screen_height, input_resolution[0].width, input_resolution[0].height)
- place_rectangle(chain.input1.resample_effect, chain.input1.resize_effect, chain.input1.padding_effect, left1, top1, right1, bottom1, screen_width, screen_height, input_resolution[1].width, input_resolution[1].height)
+-- Find the transformation that changes the first rectangle to the second one.
+function find_affine_param(a, b)
+ local sx = (b.x1 - b.x0) / (a.x1 - a.x0)
+ local sy = (b.y1 - b.y0) / (a.y1 - a.y0)
+ return {
+ sx = sx,
+ sy = sy,
+ tx = b.x0 - a.x0 * sx,
+ ty = b.y0 - a.y0 * sy
+ }
+end
+
+function place_rectangle_with_affine(resample_effect, resize_effect, padding_effect, pos, aff, screen_width, screen_height, input_width, input_height)
+ local x0 = pos.x0 * aff.sx + aff.tx
+ local x1 = pos.x1 * aff.sx + aff.tx
+ local y0 = pos.y0 * aff.sy + aff.ty
+ local y1 = pos.y1 * aff.sy + aff.ty
+
+ place_rectangle(resample_effect, resize_effect, padding_effect, x0, y0, x1, y1, screen_width, screen_height, input_width, input_height)
end
function set_neutral_color(effect, color)
end
function set_neutral_color_from_signal(effect, signal)
- if signal == INPUT0_SIGNAL_NUM then
- set_neutral_color(effect, input0_neutral_color)
+ if is_plain_signal(signal) then
+ set_neutral_color(effect, neutral_colors[signal - INPUT0_SIGNAL_NUM + 1])
+ end
+end
+
+function calc_zoom_progress(t)
+ if t < transition_start then
+ return 0.0
+ elseif t > transition_end then
+ return 1.0
else
- set_neutral_color(effect, input1_neutral_color)
+ local tt = (t - transition_start) / (transition_end - transition_start)
+ -- Smooth it a bit.
+ return math.sin(tt * 3.14159265358 * 0.5)
end
end
function calc_fade_progress(t, transition_start, transition_end)
local tt = (t - transition_start) / (transition_end - transition_start)
if tt < 0.0 then
- tt = 0.0
+ return 0.0
elseif tt > 1.0 then
- tt = 1.0
+ return 1.0
end
-- Make the fade look maybe a tad more natural, by pumping it